74 8LT Series polarization N - normal A-B-C-D - see table p 77 contact type P - male S - female A - male connector supplied less contact or with specific contacts B - female connector supplied less contact or with specific contacts contact layout - see table p 120 plating F - nickel B - olive green cadmium (MIL-C 38999 - HE 308) shell size 09-11-13-15-17-19-21-23-25 designator — - connectors with standard crimp contacts L - receptacle with long spill (male and female # 22D) C - receptacle with short spill (male and female # 22D, # 20, # 16) T - receptacle with male contacts size 20 for wire wrap (2 wraps) W - receptacle with male contacts size 22 for wire wrap (3 wraps) shell type 0 - square flange receptacle 3 - square flange receptacle (rear mounting) 2 - square flange receptacle not accepting backshell 7 - jam nut receptacle 1 - cable connecting receptacle 5 - plug with RFI shielding Applications High density connectors for all military and aeronautical purposes. Description • High density connector from 1 to 128 contacts • Sizes 22D, 20, 16, 12, # 16 coax and # 8 triax • Bayonet locking system • 100% scoop proof Climatic • Temperature range : - cadmium plating (B) : -65°C +175°C - nickel plating (F) : -65°C +200°C • Sealing : mated connectors - differential pressure 2 bars - leakage ≤ 16 cm 3 /hr • Salt spray to : MIL STD 1344 method 1001 - 500 hours (version B) - 48 hours (version F) NFC 93422 - 48 hours (version F) • Damp heat : MIL-C 38999 : 10 cycles 24 hrs NFC 93422 : 56 days Resistance to fluids To MIL-C 38999 : • MIL-L 7808 • MIL-L 23699 • MIL-H 5606 • MIL-A 8243 • MIL-C 25769 • MIL-T 5624 (JP5) • hydraulic fluids • solvents To NFC 93422 : F46 - F54 - 0/180 - H515 - H542 - XH45 Standards MIL-C 38999 Series I - QPL approved NFC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Characteristics Mechanical • Shell : aluminum alloy • Plating : - olive green cadmium (B) - nickel (F) • Insulator : thermoplastic • Grommet and seal : silicone elastomer • Contact : copper alloy • Plating : gold over nickel • Endurance : 500 cycles • Shock : 300 g during 3 ms and MIL-S901 grade A • Vibration : sine 10 to 2000 H 30 g random 100 to 300 Hz - 5 (g 2 /Hz) • Contact retention : (mini force in N) size 22 D : 45 N size 20 : 67 N size 16 : 110 N size 12 : 110 N size 8 : 110 N basic series 8LT 0 - 13 B 35 P N Connectors ordering information FCI Souriau part numbers Test voltage (Vrms) Service sea level at 21000 m M 1300 800 I 1800 1000 II 2300 1000 • Contact resistance : resistance of wire included in measurement : size 22D : 14.6 mΩ size 20 : 7.3 mΩ size 16 : 3.8 mΩ size 12 : 1.7 mΩ • Insulation resistance : ≥ 5000 MΩ (at 500 Vdc) • Contact rating : size 22D : 5 A size 20 : 7.5 A size 16 : 13 A size 12 : 23 A • Shell continuity : - olive green plating : 2.5 mΩ - nickel plating : 1 mΩ • Shielding : - 90 dB to 100 MHz - 50 dB to 10000 MHz • Triaxial contact : # 8 - bandwidth : 0 - 20 MHz - voltage rating : 500 Vac Max. 125 Vac at 21000 m - voltage drop : inner and middle contact ≤ 55 mV under 1A outer contact ≤ 75 mV under 12A Electrical Note : connectors supplied with standard contacts
30
Embed
8LT Series - souriau.co.jpsouriau.co.jp/fileadmin/Souriau/product_pdf/P074-P087-97-107-108... · 8LT Series specification - connector supplied with contact : ... FCI Souriau NFC 93422
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
74
8LT Series
polarization N - normalA-B-C-D - see table p 77
contact type P - male S - femaleA - male connector supplied less contact or with specific contactsB - female connector supplied less contact or with specific contacts
contact layout - see table p 120
plating F - nickelB - olive green cadmium (MIL-C 38999 - HE 308)
shell size 09-11-13-15-17-19-21-23-25
designator — - connectors with standard crimp contactsL - receptacle with long spill (male and female # 22D)C - receptacle with short spill (male and female # 22D, # 20, # 16)T - receptacle with male contacts size 20 for wire wrap (2 wraps)
W - receptacle with male contacts size 22 for wire wrap (3 wraps)
shell type 0 - square flange receptacle3 - square flange receptacle (rear mounting)2 - square flange receptacle not accepting backshell7 - jam nut receptacle1 - cable connecting receptacle5 - plug with RFI shielding
ApplicationsHigh density connectors for all militaryand aeronautical purposes.
• Insulator : thermoplastic• Grommet and seal : silicone elastomer• Contact : copper alloy• Plating : gold over nickel• Endurance : 500 cycles• Shock : 300 g during 3 ms and MIL-S901
grade A• Vibration : sine 10 to 2000 H 30 g random
100 to 300 Hz - 5 (g2/Hz)• Contact retention : (mini force in N)
size 22 D : 45 N size 20 : 67 Nsize 16 : 110 N size 12 : 110 Nsize 8 : 110 N
basic series 8LT 0 - 13 B 35 P N
Connectors ordering informationFCI Souriau part numbers
Test voltage (Vrms)
Service sea level at 21000 mM 1300 800I 1800 1000II 2300 1000
• Contact resistance :resistance of wire included in measurement :size 22D : 14.6 mΩ size 20 : 7.3 mΩsize 16 : 3.8 mΩ size 12 : 1.7 mΩ
125 Vac at 21000 m- voltage drop : inner and middle contact ≤ 55 mV under 1Aouter contact ≤ 75 mV under 12A
Electrical
Note : connectors supplied with standard contacts
75
8LT Series
specification - connector supplied with contact : (without specification)L - connector supplied without contact
contractual specification
contractual specification
suffix for backshell type 07 only1 - for receptacle type 0 (shells 09 to 25) 2 - for receptacle type 7 (shells 09 to 25)
- for plug type 5 (shells 09 to 23) - for plug type 5 (shell 25 only)
MIL-C 38999 part numbers
polarization N - Normal (not included in part number)A-B-C-D - see table p 77
contact type P - male A - male connector supplied less contact or with specific contactsS - female B - female connector supplied less contact or with specific contacts
contact layout - see table p 120
plating B - olive green cadmium F - nickel
shell size 09-11-13-15-17-19-21-23-25
class T - with thread for backshell, supplied less backshell
shell type 27466 - square flange receptacle (front mounting)27656 - square flange receptacle (rear mounting)27468 - jam nut receptacle27467 - plug with RFI shielding
basic series MS 27466 T 13 B 35 P •
Note : connectors supplied with MIL-C contacts
plating 6 - nickel 7 - olive green cadmium
polarization N - normal A-B-C-D - see table p 77
contact type P - male S - female
contact layout - see table p 120
shell size 09-11-13-15-17-19-21-23-25
class T - sealed
shell type 00 - square flange receptacle 07 - jam nut receptacle06 - plug with RFI shielding11 - jam nut receptacle with straight spill contacts
basic series HE308 - 00 T 13 - 35 P N 7 M •
backshell type 01 - backnut 03 - elbow cable clamp02 - straight cable-clamp 07 - backshell for screen termination and heatshrink boot
designator 1 - for receptacle type 0 (shells 09 to 25) 2 - for receptacle type 7 (shells 09 to 25)- for plug type 5 (shells 09 to 23) - for plug type 5 (shell 25 only)
shell size 09-11-13-15-17-19-21-23-25
backshell type 13 - backshell for screen termination and heatshrink boot
basic series HE 308 - 13 13 1 7 MHE 308 part numbers
Backshells ordering information FCI Souriau part numbers
76
8LT Series
8LT1 - •• B •• cable connecting receptacle
8LT0 - •• B •• HE308-00T •• - •• 7 MS27466T •• B •• square flange receptacle
8LT3 - •• B •• MS27656T •• B •• square flange receptacle (rear mounting)
8LT7 - •• B •• HE308-07T •• - •• 7 MS27468T •• B •• jam nut receptacle
8LT0 - •• F •• HE308-00T •• - •• 6 MS27466T •• F •• square flange receptacle
8LT3 - •• F •• MS27656T •• F •• square flange receptacle (rear mounting)
8LT7 - •• F •• HE308-07T •• - •• 6 MS27468T •• F •• jam nut receptacle
8LT1 - •• F •• cable connecting receptacle
8LT2 - •• B •• square flange receptacle not accepting backshell
8LT2 - •• F •• square flange receptacle not accepting backshell
8LT5 - •• B•• HE308-06T •• - •• 7 MS2746T •• B •• plug with RFI shielding
8LT5 - •• F •• HE308-06T •• - •• 6 MS2746T •• F •• plug with RFI shielding
8LST ••• G01 backnut
8LST ••• G02 HE308-11 •• 27 straight cable clamp
8LST ••• G03 HE308-12 •• 27 elbow cable clamp
8LST ••• B071 HE308-13 •• 17 backshell for screen termination
and heatshrink sleeving
8LST ••• B072 HE308-13 •• 27 backshell for screen termination
and heatshrink sleeving
8LST ••• B01 M85049/27-••W backnut
8LST ••• B02 straight cable clamp
8LST ••• B03 elbow cable clamp
8LST ••• F01 M85049/27-••N backnut
8LST ••• F02 HE308-11 •• 26 straight cable clamp
8LST ••• F03 HE308-12 •• 26 elbow cable clamp
8LST ••• F071 HE308-13 •• 16 backshell for screen termination
and heatshrink sleeving
8LST ••• F072 HE308-13 •• 26 backshell for screen termination
and heatshrink sleeving
8LTE04G •• HE308-B00 •• 7 cap for square flange receptacle
8LTE06G •• HE308-B07 •• 7 cap for jam nut receptacle
8LTE04F •• HE308-B00 •• 6 cap for square flange receptacle
8LTE06F •• HE308-B07 •• 6 cap for jam nut receptacle
shell part numbers L1 L3 D1 B1 E1 Jsize Max Max Max Max
Plastic protective caps
09 8500-5594 8500-5595
11 8500-5595 8500-5588
13 8500-5598 70205
15 8500-5599 70206
17 8500-5600 70207
19 8500-5601 8500-5589
21 8500-5602 8500-5590
23 8500-5592 8500-5591
25 8500-5593 70602
shell size part numberscaps for receptacles caps for plugs
Gaskets
09 8599-5541 MS9068-019
11 8599-5542 MS9068-022
13 8599-5543 MS9068-024
15 8599-5544 MS9068-026
17 8599-5545 MS9068-028
19 8599-5546 MS9068-128
21 8599-5547 MS9068-130
23 8599-5548 MS9068-132
25 8599-5549 MS9068-134
part numbersshell size gasket for receptacles type 0 O ring for receptacle type7(ordered separately)
shell size 09-11-13-15-17-19-21-23-25
plating B - olive green cadmium (MIL-C 38999)F - nickel
fixing type cap for receptacle cap for plug01 - plastic sleeved metal cord with eyelet 01 - plastic sleeved metal cord with eyelet02 - plastic sleeved metal cord with ring 03 - nylon cord without fastener04 - nylon cord with eyelet 05 - nylon cord with eyelet06 - nylon cord with ring 07 - nylon cord with strap
specification - - connector supplied with contact (without specification)L - connector supplied without contact
contractual specification M - DAT quality assurance
plating 7 - olive green cadmium
polarization N - normal
contact type P - male contact S - female contact
contact layout - please consult us
shell size - please consult us
class T - sealed
shell type 26 - floating plug for rack, for crimp female contacts, with possibility to mount rear accessory
27 - receptacle for rack, for male contacts with possibility to mount rear accessory
basic seriesHE 308 basic series
SN 2550 -26 T 23 -01 P N 7 M •HE 308
97
8T Series
polarization N-A-B-C-D - see table p 100
contact type P - male A - male connector without contact or with special contactsS - female B - female connector without contact or with special contacts
contact layout - see table p 120
plating G - olive green cadmium (HE 309)F - nickelB - olive green cadmium (MIL-C 38999)C - hard anodized
shell size 08-10-12-14-16-18-20-22-24
designator - connectors with standard crimp contactsL - receptacle with long spill (male and female # 22D)C - receptacle with short spill (male # 22D - # 20 - # 16)
shell type 2 - square flange receptacle not accepting backshells3 - square flange receptacle (rear mounting)7 - jam nut receptacle1 - cable connecting receptacle6 - plug
basic series 8 T 3 - 14 G 35 P N
ApplicationsCompact profile and high densityconnectors for all military andaeronautical purposes
Description• High density connectors from 1 to
128 contacts
• Sizes 22D, 20, 16, 12
• A compact profile
• Bayonet locking system
• An excellent shock vibration and fluidresistance
polarization N - Normal (not included in part number)A-B-C-D - see table p 100
contact type P - male A - male connector supplied without contact or with special contactsS - female B - female connector supplied without contact or with special contacts
contact layout - see table p 120
plating B - olive green cadmium F - nickel C - hard anodized
shell size 08-10-12-14-16-18-20-22-24
class T - with thread for backshell, supplied without backshellE - without thread for backshell only for MS 27508
shell type 27508 - square flange receptacle without thread for back fitting27497 - square flange receptacle (rear mounting)27474 - jam nut receptacle27473 - plug
basic series MS 27497 T 14 B 35 P •
8T2 - •• G •• P HE 309-05T •• - •• P 7 PAN 6433-1E •• - •• P
8T2 - •• G •• A HE 309-05T •• - •• P 7L8T2 - •• G •• S HE 309-05T •• - •• S 7 PAN 6433-1E •• - •• S
8T2 - •• G •• B HE 309-05T •• - •• S 7L8T2 - •• B •• P MS27508E •• B •• P 8T2 - •• B •• A MS27508E •• B •• A 8T2 - •• B •• S MS27508E •• B •• S 8T2 - •• B •• B MS27508E •• B •• B 8T2 - •• F •• P MS27508E •• F •• P HE 309-05T •• - •• P 68T2 - •• F •• A MS27508E •• F •• A HE 309-05T •• - •• P 6L8T2 - •• F •• S MS27508E •• F •• S HE 309-05T •• - •• S 68T2 - •• F •• B MS27508E •• F •• B HE 309-05T •• - •• S 6L8T2 - •• C •• P MS27508E •• C •• P HE 309-05T •• - •• P 88T2 - •• C •• A MS27508E •• C •• A HE 309-05T •• - •• P 8L8T2 - •• C •• S MS27508E •• C •• S HE 309-05T •• - •• S 88T2 - •• C •• B MS27508E •• C •• B HE 309-05T •• - •• S 8L
8T3 - •• G •• P HE 309-03T •• - •• P 7 PAN 6433-1B •• - •• P
8T3 - •• G •• A HE 309-03T •• - •• P 7L8T3 - •• G •• S HE 309-03T •• - •• S 7 PAN 6433-1B •• - •• S
8T3 - •• G •• B HE 309-03T •• - •• S 7L8T3 - •• B •• P MS27497T •• B •• P 8T3 - •• B •• A MS27497T •• B •• A 8T3 - •• B •• S MS27497T •• B •• S 8T3 - •• B •• B MS27497T •• B •• B 8T3 - •• F •• P MS27497T •• F •• P HE 309-03T •• - •• P 68T3 - •• F •• A MS27497T •• F •• A HE 309-03T •• - •• P 6L8T3 - •• F •• S MS27497T •• F •• S HE 309-03T •• - •• S 68T3 - •• F •• B MS27497T •• F •• B HE 309-03T •• - •• S 6L8T3 - •• C •• P MS27497T •• C •• P HE 309-03T •• - •• P 88T3 - •• C •• A MS27497T •• C •• A HE 309-03T •• - •• P 8L8T3 - •• C •• S MS27497T •• C •• S HE 309-03T •• - •• S 88T3 - •• C •• B MS27497T •• C •• B HE 309-03T •• - •• S 8L
Cross reference list - part numbers cross reference list FCI Souriau and MIL-C 38999NFC 93422 - PAN 6433-1
MIL-C 38999 Series II NFC 93422 / HE 309 PAN 6433-1
Sq
uare
fla
nge
rece
pta
cle
with
out
thre
ad f
or b
ack
fittin
gS
qua
re f
lang
e re
cep
tacl
ew
ith t
hrea
d f
or b
ack
fittin
g
99
8T SeriesC
able
con
nect
ing
rece
pta
cle
Plu
g w
ithou
t R
FI s
hiel
din
g
FCI Souriau
8T7 - •• G •• P HE 309-07T •• - •• P 7 PAN 6433-1A •• - •• P
8T7 - •• G •• A HE 309-07T •• - •• P 7L8T7 - •• G •• S HE 309-07T •• - •• S 7 PAN 6433-1A •• - •• S
8T7 - •• G •• B HE 309-07T •• - •• S 7L8T7 - •• B •• P MS27474T •• B •• P 8T7 - •• B •• A MS27474T •• B •• A 8T7 - •• B •• S MS27474T •• B •• S 8T7 - •• B •• B MS27474T •• B •• B 8T7 - •• F •• P MS27474T •• F •• P HE 309-07T •• - •• P 68T7 - •• F •• A MS27474T •• F •• A HE 309-07T •• - •• P 6L8T7 - •• F •• S MS27474T •• F •• S HE 309-07T •• - •• S 68T7 - •• F •• B MS27474T •• F •• B HE 309-07T •• - •• S 6L8T7 - •• C •• P MS27474T •• C •• P HE 309-07T •• - •• P 88T7 - •• C •• A MS27474T •• C •• A HE 309-07T •• - •• P 8L8T7 - •• C •• S MS27474T •• C •• S HE 309-07T •• - •• S 88T7 - •• C •• B MS27474T •• C •• B HE 309-07T •• - •• S 8L
8T6 - •• G •• P HE 309-06T •• - •• P 7 PAN 6433-1F •• - •• P
8T6 - •• G •• A HE 309-06T •• - •• P 7L8T6 - •• G •• S HE 309-06T •• - •• S 7 PAN 6433-1F •• - •• S
8T6 - •• G •• B HE 309-06T •• - •• S 7L8T6 - •• B •• P MS27473T •• B •• P 8T6 - •• B •• A MS27473T •• B •• A 8T6 - •• B •• S MS27473T •• B •• S 8T6 - •• B •• B MS27473T •• B •• B 8T6 - •• F •• P MS27473T •• F •• P HE 309-06T •• - •• P 68T6 - •• F •• A MS27473T •• F •• A HE 309-06T •• - •• P 6L8T6 - •• F •• S MS27473T •• F •• S HE 309-06T •• - •• S 68T6 - •• F •• B MS27473T •• F •• B HE 309-06T •• - •• S 6L8T6 - •• C •• P MS27473T •• C •• P HE 309-06T •• - •• P 88T6 - •• C •• A MS27473T •• C •• A HE 309-06T •• - •• P 8L8T6 - •• C •• S MS27473T •• C •• S HE 309-06T •• - •• S 88T6 - •• C •• B MS27473T •• C •• B HE 309-06T •• - •• S 8L
8599-0902 M39029/58-360 PAN 6433-1P8599-0903 M39029/58-3638599-0904 M39029/58-3648599-0905 M39029/58-3658599-0910 M39029/57-354 PAN 6433-1S8599-0911 M39029/57-3578599-0912 M39029/57-3588599-0913 M39029/57-3598660-212 M27488-22 PAN 6433-1N8522-389A M27488-208522-390A M27488-168599-0022 M81969/14-018522-20 M81969/14-028522-16 M81969/14-03
8LST ••• G01 HE 309-17 •• 78LST ••• B01 M85049/27 •• W8LST ••• F01 M85049/27 •• N HE 309-17 •• 6
8T1 - •• G •• P 8T1 - •• G •• A 8T1 - •• G •• S 8T1 - •• G •• B 8T1 - •• B •• P 8T1 - •• B •• A 8T1 - •• B •• S 8T1 - •• B •• B 8T1 - •• F •• P 8T1 - •• F •• A 8T1 - •• F •• S 8T1 - •• F •• B 8T1 - •• C •• P 8T1 - •• C •• A 8T1 - •• C •• S 8T1 - •• C •• B
Cross reference list - FCI Souriau part numbers and MIL-C 38999, NFC 93422 - PAN 6433-1 standard
MIL-C 38999 Series II NFC 93422 / HE 309 PAN 6433-1
Jam
nut
rec
epta
cle
Con
tact
s -
fille
r p
lugs
- t
ools
Bac
kshe
lls
100
8T Series
shell size
PolarizationPolarization is determined by the master keyway position. The secondary keyway positions remain fixed.
08 35 X 6 100 82 - - 118
10 35 X 13 100 86 72 128 114
12 35 X 100 80 68 132 120
14 35 X 37 100 79 66 134 12118 X 18 100 79 66 134 121
35 X 55 100 82 70 130 11816 08 X 8 100 82 70 130 118
06 X 6 100 82 70 130 118
18 35 X 66 100 82 70 130 118
35 X 79 100 82 70 130 118
20 41 X 41 100 82 70 130 11816 X 16 100 82 70 130 11811 X 11 100 82 70 130 118
22 35 X 100 100 85 74 126 115
35 X 128 100 85 74 126 115
24 61 X 61 100 85 74 126 11529 X 29 100 85 74 126 11524 X 12 12 100 85 74 126 115
contactslayout
service
M I II
number of contacts
# 22D # 20 # 16 # 12Ø 0,76 Ø 1 Ø 1,6 Ø 2,4
angle in degrees
N A B C D
view from front face of plug
view from front face of receptacle
101
8T SeriesDimensions
backshells
D 1 Max 19.05 21.82 26.19 29.36 32.54 35.71 38.89 41.68 44.86.750 .859 1.031 1.156 1.281 1.406 1.531 1.641 1.766
contact layout - see standard layout for 8T Series p 120
shell size 08-10-12-14-16-18-20-22-24
class T - sealed
shell type 04 - through bulkhead receptacle
basic series SN1738 04 T •• •• PS N 7
Ordering information
shell size 08-10-12-14-16-18-20-22-24
plating B - olive green cadmium (MIL-C 38999)F - nickel
fixing type cap for receptacle cap for plug01 - plastic sleeved metal cord with eyelet 01 - plastic sleeved metal cord with eyelet02 - plastic sleeved metal cord with ring
Part numbersgasket for receptacle type 3 O. ring for receptacle type 7
(ordered separately)
Gaskets
08
10
12
14
16
18
20
22
24
Shell size
8500-5585A 8500-5594
8500-5586A 71120
8500-5587A 8500-5596
8500-5588A 8500-5597
8500-5589A 8500-5598
8500-5590A 8500-5589
8500-5591A 8500-5600
8500-5592A 8500-5601
8500-5593A 8500-5602
Part numberscap for receptacles cap for plug
Plastic protective caps
4 holes Ø J
Type 01 Type 02
Type 01
Reusable fixing plateTwo, three or four-holes self-locking fixing-plates are available at SHTP. See page 126.
108
8D Aluminum Series
046 tinned straight spill
polarization N- normalA-B-C-D-E - see table p 109
contact type P - male A - male connector supplied less contact or with specific contactsS - female B - female connector supplied less contact or with specific contacts
contact layout - see table p 120
plating W - olive green cadmiumF - nickel
shell size 09-11-13-15-17-19-21-23-25
designator - - connectors with crimp contactsL - receptacle with long spill (male and female # 22D)C - receptacle with short spill (male and female # 22D - # 20 - # 16)S - receptacle with specific spill (male and female # 22D)W - receptacle with male contacts size 22D for wire wrap (3 wraps)T - receptacle with male contacts size 20 for wire wrap (2 wraps)
shell type 0 - square flange receptacle7 - jam nut receptacle5 - plug with RFI shielding
ApplicationsHigh density connectors for all militaryand aeronautical purposes with severevibration environment
Description• High density connector from 1 to
128 contacts
• Sizes 22D, 20, 16, 12, # 16 coax and# 8 triax
• A quick screw coupling with anti-decoupling mechanism
• 100 % scoop proof
• An EMI/RFI reinforced shielding withgrounding fingers
125 Vac at 21000 m- voltage drop : inner and middle contact ≤ 55 mV under 1Aouter contact ≤ 75 mV under 12A
109
8D Aluminum SeriesMIL-C 38999 part numbers
polarization N - normalA-B-C-D-E - see table below
contact type P - male A - male connector supplied less contact or with specific contactsS - female B - female connector supplied less contact or with specific contacts
contact layout - see table p 109
shell size A to J09 11 13 15 17 19 21 23 25A B C D E F G H J
plating W - olive green cadmiumF - nickel
shell type 20 - square flange receptacle24 - jam nut receptacle26 - plug with RFI shielding