Applications - Tapered-wall, flexible containers - Round, square, rectangle or irregular-shaped containers - Fragile container designs - Composite, metal or blow-molded containers - Injected-molded, flexible overcaps - 2” - 7” diameter containers - 2” - 12” height containers DEL Packaging, Ltd Overcapper | Model: SASRC-CC Sanitary Adjustable Spinning Rod Capper - Cradle Chain The containers are back logged into an in-feed timing screw. A photo-eye sensor is used to ensure the back log is maintained. The containers are released from the timing screw with a predetermined pitch into the overcapper and is carried by the table-top chain conveyor into a set of split-cradle blocks. The cradle blocks maintain the shape and integrity of the container during the application of the overcap. As the container travels through the center of the overcapper, the leading edge pulls the overcap from a chute and is progressively applied onto the container by a series of compression rollers. PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
8_CUTSHEET_overcapper_SASRC-CC
Mar 31, 2016
Applications Sanitary Adjustable Spinning Rod Capper - Cradle Chain - Tapered-wall, exible containers - Round, square, rectangle or irregular-shaped containers - Fragile container designs - Composite, metal or blow-molded containers - Injected-molded, exible overcaps - 2” - 7” diameter containers - 2” - 12” height containers PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Applications
- Tapered-wall, �exible containers
- Round, square, rectangle or irregular-shaped containers
- Fragile container designs
- Composite, metal or blow-molded containers
- Injected-molded, �exible overcaps
- 2” - 7” diameter containers
- 2” - 12” height containers
DEL Packaging, Ltd
Overcapper | Model: SASRC-CC
Sanitary Adjustable Spinning Rod Capper - Cradle ChainThe containers are back logged into an in-feed timing screw. A photo-eye sensor is used to ensure the back log is maintained. The containers are released from the timing screw with a predetermined pitch into the overcapper and is carried by the table-top chain conveyor into a set of split-cradle blocks. The cradle blocks maintain the shapeand integrity of the container during the application of the overcap. As the container travels through the center of the overcapper, the leading edge pulls the overcap from a chute and is progressively applied onto the container by a series of compression rollers.
PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Speci�cations
- Up to 150 containers per minute
- Shown with spinning rod cap feeder head
- Manual container diameter adjustment
- Stainless steel (non-wash down) construction
- 460 Volts /60 Hertz /Phase 3 NEMA 4X controls
Available Options
- Digital height adjustment packages
- Automatic cap loading system
- Rotary cap feeder
- Sanitary wash-down construction
- Conveyors (table-top, air, etc.)
- Coupon / lea�et inserters
- Electrical and control system upgrade
- Spinning rod head storage cart with wench
- Ethernet and communication modules
- All domestic and international voltages to meet UL and CE requirements
- Cap detection with reject (�ber optic sensors and/or vision technology)
Experience the DEL Di�erence
Contact DEL Packaging, Ltd
18113 Telge Road | Cypress, TX 77429Phone: 281.653.0099 | Fax: 281.653.0082http://www.delpackaging.com | [email protected] Overcapper | Model: SASRC-CC
Related Documents
