8 th Annual Sucker Rod Pumping Workshop Renaissance Hotel, Oklahoma City, Oklahoma September 25 – 28, 2012 Focus on Sucker Rod Pumping Technology, Information,

8th Annual Sucker Rod Pumping Workshop

Renaissance Hotel, Oklahoma City, Oklahoma

September 25 – 28, 2012

Focus on Sucker Rod Pumping Technology, Information, Automation,

Case Histories, Experiences

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 2

Copyright

Rights to this presentation are owned by the company(ies) and/or author(s) listed on the title page. By submitting this presentation to the Sucker Rod Pumping Workshop, they grant to the Workshop, the Artificial Lift Research and Development Council (ALRDC), and the Southwestern Petroleum Short Course (SWPSC), rights to:

– Display the presentation at the Workshop.

– Place it on the www.alrdc.com web site, with access to the site to be as directed by the Workshop Steering Committee.

– Place it on a CD for distribution and/or sale as directed by the Workshop Steering Committee.

Other use of this presentation is prohibited without the expressed written permission of the author(s). The owner company(ies) and/or author(s) may publish this material in other journals or magazines if they refer to the Sucker Rod Pumping Workshop where it was first presented.

2012 Sucker Rod Pumping Workshop 3

Disclaimer

The following disclaimer shall be included as the last page of a Technical Presentation or Continuing Education Course. A similar disclaimer is included on the front page of the Sucker Rod Pumping Web Site.

The Artificial Lift Research and Development Council and its officers and trustees, and the Sucker Rod Pumping Workshop Steering Committee members, and their supporting organizations and companies (here-in-after referred to as the Sponsoring Organizations), and the author(s) of this Technical Presentation or Continuing Education Training Course and their company(ies), provide this presentation and/or training material at the Sucker Rod Pumping Workshop "as is" without any warranty of any kind, express or implied, as to the accuracy of the information or the products or services referred to by any presenter (in so far as such warranties may be excluded under any relevant law) and these members and their companies will not be liable for unlawful actions and any losses or damage that may result from use of any presentation as a consequence of any inaccuracies in, or any omission from, the information which therein may be contained.

The views, opinions, and conclusions expressed in these presentations and/or training materials are those of the author and not necessarily those of the Sponsoring Organizations. The author is solely responsible for the content of the materials.

The Sponsoring Organizations cannot and do not warrant the accuracy of these documents beyond the source documents, although we do make every attempt to work from authoritative sources. The Sponsoring Organizations provide these presentations and/or training materials as a service. The Sponsoring Organizations make no representations or warranties, express or implied, with respect to the presentations and/or training materials, or any part thereof, including any warrantees of title, non-infringement of copyright or patent rights of others, merchantability, or fitness or suitability for any purpose.

Sept. 25 – 28, 2012

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 4

General Chairman

Eric Penner of BPEric graduated from the University of Oklahoma with a BS in Chemical Engineering. He went to work for BP America as a production engineer and has worked a variety of fields, including the Pompano platform in the Gulf of Mexico deepwater, the Arkoma Asset in southeast Oklahoma, the Permian Basin, and the San Juan Basin. He currently focuses on coalbed methane production in the northern part of the San Juan Basin.

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 5

Keynote Speaker

Todd MoehlenbrockVP of Engineering Technology, Devon 

Todd W. Moehlenbrock is the Vice President of Engin-eering Technology department within the E&P Stra-tegic Services Division at Devon Energy Corp. The Engineering Technology department facilitates the alignment and collaboration across Devon by develop-ing capabilities that support innovation, technology transfer, best practices, and standardization. He has over 25 years of experience in the oil and gas industry and has been at Devon since 1999. Prior to his current role, Todd was an operations engineer and manager at Devon, working the Permian Basin and Rocky Mountain assets. Previous to Devon, he worked at Sonat Exploration Co. and Texaco Inc. as a completion and production engineer. He holds a B.S. degree in Petroleum Engineering from the University of Tulsa. 

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 6

Gal Friday

Ronda Brewer• Southwestern Petroleum Short Course and ALRDC

• Very special thanks to Ronda. Without her hard work and dedication, this Workshop couldn’t come together as well as it does.

• Thank You!

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 7

Continuing Education CoursesOne-Day Courses on Tuesday

Course 101 --- Basic Sucker Rod Pumping– Tom vanAkkerenTues: 8:00 – 5:00 Room --- 20

Course 102 --- Shooting and Interpreting Fluid Levels in Sucker Rod Wells– Lynn Rowlan Tues : 8:00 – 5:00 Room --- 17

Course 201a --- Dynagraph Analysis– Louis Ray Tues: 8:00 – 5:00 Room --- 18

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 8

Continuing Education CoursesOne-Day Courses on Wednesday

Course 103 --- Sucker Rod Pump Automation Hardware and Software

– Anthony Allison Wed: 8:00 – 5:00 Room --- 18

Course 201b --- Troubleshooting Rod and Pump Problems– Lynn Rowlan Wed: 8:00 – 5:00 Room --- 17

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 9

Continuing Education CoursesTwo-Day Courses on Tuesday & Wednesday

Course 202 --- Care, Handling, Best Practices, and Failures– Mike Brock Tues & Wed: 8:00 – 5:00 Room --- 19– Mike Poythress– Russell Stevens– Justin Conyers

Course 203 --- Rod System Design– Norm Hein Tues & Wed: 8:00 – 5:00 Room --- 16

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 10

Technical Sessions

I New Technology, R&D– Thursday: 7:55 – 12:00 Rooms ---- 16 - 18– Chair: Tom Cochrane, ConocoPhillips– Steel Rod Testing Norris Prod. Solutions– Polish Rod Bending ONGC, India– Fluid Load Lines Weatherford– Thermo Plastic Tubing Western Falcon– Pump Slippage Echometer– Downhole Gas Separators Echometer

\

Sept. 25 –28, 2012 2012 Sucker Rod Pumping Workshop 11

Technical Sessions

II Design, Automation, Optimization, Challenges– Thursday: 1:30 – 4:00 Rooms ---- 16 - 18

– Chair: Norm Hein, Norris Prod. Solutions– Sucker Rod Side Loads ConocoPhillips– QRod Design Tool Echometer– Modified Everitt-Jennings Weatherford– Dual Damping Factors Weatherford

III Case Histories, Experiences, Best Practices– Friday: 7:55 – 12:00 Rooms ---- 16 - 18 – Chair: Stacy Horn, EOG; Rick Webb, Wilson– Lower Costs Key Energy– Slim Hole Couplings Norris Prod.

Solutions– Long Stroke Units Weatherford– Back Pressure Wells Whisper– API RP 11BR Rod Lift Consulting

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 12

Breakout SessionsI Understanding the Sucker Rod Wave Equation

– Thursday: 4:30 – 6:00– Room --- 19 - 20– Facilitator: Victoria Pons

II Rod Pumping System Failure Frequency and Failure Analysis– Thursday: 4:30 – 6:00– Room --- 16– Facilitator: Tom vanAkkeren

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 13

Workshop Sponsors

Artificial Lift R&D Council

ConocoPhillips

South WesternPetroleum Short Course

Sept. 25 – 28, 2011 2012 Sucker Rod Pumping Workshop 14

Workshop Sponsors

Texas Tech. Dept. ofPetroleum Engineering

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 15

Workshop Exhibitors

Artificial Lift Consultants

Echometer, Inc.

John Crane Production

Norris Rods

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 16

Workshop Exhibitors

Permian Production Equipment

Quinn Pumps

Tenaris

UPCO Inc.

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 17

Workshop Exhibitors

Weatherford Artificial Lift

Western Falcon

Wilson Artificial Lift

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 18

Workshop Meals & Events

Monday ALRDC Board Meeting (6:00 pm, at Workshop Hotel)

Tuesday Continuing Education (8:00 – 5:00), Various Rooms

Wednesday Continuing Education (8:00 – 5:00), Various Rooms

Reception (5:15 – 7:00), Ballroom D, E

Thursday Technical Session (7:55 – 12:00), Room 16 - 18Lunch (12:00 – 1:00), Ballroom D, EKeynote Address (1:00 – 1:30), Room 19 - 20Technical Session (1:30 – 4:00). Room 16 - 18Breakout Sessions (4:30 – 6:00), Various Rooms

Friday Technical Session (7:55 – 12:00 ), Room 16 - 18 Door prizes (12:00 – 12:10), Room 16 - 18 Lunch (12:10 – 1:30), Ballroom D, E Steering Committee (12:10 – 1:30), Room 21

Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 19

Presentations on the Web

Use the ALRDC Web Site www.alrdc.com

– Go to:

• Workshops

• Fall 2012 Sucker Rod

• Presentations (or Breakouts)

• Access Code: 2014F86