7b Kobelco CKE800-1F_spec (2)

Max. Lifting Capacity: 80 t x 3.0 mMax. Crane Boom Length: 54.9 mMax. Fixed Jib Combination: 42.7 + 18.3 m

45.7 + 12.2 m

HYDRAULIC CRAWLER CRANE

Model: CKE800-1F

1CONFIGURATION

Crane BoomMax. Lifting Capacity:

80 metric ton x 3.0 mMax. Boom Length:

54.9 m

2Crane Boomwith Fixed Jib

Max. Lifting Capacity: 31.9 metric ton x 6.8 m

Fixed JibMax. Lifting Capacity:

6.6 metric ton x 20.0 mMax. Combination:

42.7 m + 18.3 m45.7 m + 12.2 m

CONTENTSConfiguration 1

Specifications 3

General Dimensions 5

Boom andJib Arrangements

Crane Boom Arrangements 6

Fixed Jib Arrangements 6

Working Ranges and Lifting Capacities

Crane Boom Working Ranges 8

Crane Boom Lifting Capacity 9

Auxiliary SheaveLifting Capacity forCrane Boom 9

Fixed Jib Working Ranges 10

Fixed Jib Lifting Capacities 11

Crane Boom Lifting Capacity with Fixed Jib 13

Parts and Attachments 14

SPECIFICATIONS

3

Model: Hino diesel engine J08E-TMType: Water-cooled, direct fuel injection, with turbochargerCompiles with NRMM (Europe) Stage IIIA and US EPA TierIII.Displacement: 7.684 liters Rated Power:159 kW at 2,000 min-1 {rpm} (ISO)Max. torque: 797 Nm/1,600 min-1Cooling system: Liquid, recirculating bypassStarter: 24 V/5.0 kWRadiator: Corrugated type core, thermostatically controlledAir cleaner: Dry type with replaceable paper elementThrottle: Electric throttle control, twist grip typeFuel filter: Replacement paper elementBatteries: Two 12V, 150 Ah/20 HR capacity batteries, series connected.Fuel tank capacity: 400 liters

Three variable displacement piston pumps are driven by heavy-duty pump drive. Two of variable displacement pumps are usedin the main hook hoist circuit, boom hoist circuit, auxiliary hookhoist circuit, third hoist circuit and each propel circuit. The otheris used in the swing circuit.Control: Full-flow hydraulic control system for infinitely variablepressure to front and rear drums, boom hoist brakes andclutches. Controls respond instantly to the touch, deliveringsmooth function operation.Cooling: Oil-to-air heat exchanger (plate-fin type)Filtration: Full-flow and bypass type with replaceable paperelementElectrical system: All wiring corded for easy servicing, individ-ual fused branch circuits.

Max. relief valve pressure:Load hoist, boom hoist and propel system: 31.9 MPa {325 kgf/cm2}Swing system: 27.5 MPa {280 kgf/cm2}Control system: 7.0 MPa {71 kgf/cm2}

Reservoir capacity: 440 liters

Powered by a hydraulic motor through a planetary reducer.Brake: A spring-set, hydraulically released multiple-disc brakeis mounted on the boom hoist motor and operated through acounter-balance valve.Drum lock: External ratchet for locking drum.Drum: Single drum, grooved for 16 mm dia. wire rope.Line speed: Single line on first drum layer

Hoisting/Lowering: 70 to 2 m/min

Diameter of wire ropesBoom guy line: 30 mmBoom hoist reeving: 12 parts of 16 mm dia.high strengthwire rope

Boom backstops: Required for all boom lengths

Front and rear drums for load hoist powered by a hydraulic variable plunger motors, driven through planetary reducers.Negative Brake: A spring-set, hydraulically released multiple-disc brake is mounted on the hoist motor and operated througha counter-balance valve. (Positive free fall brake is optionalitem.)Drum lock: External ratchet for locking drum.Drums:

Front drum: 550 mm P.C.D. x 545 mm wide drum, grooved for 22 mm wire rope. Rope capacity is 220 m working length and 335 m storage length.Rear drum:550 mm P.C.D. x 545 mm wide drum, grooved for 22 mm wire rope. Rope capacity is 130 m working length and 335 m storage length.Note: Rope lengths listed above denote drum capacity and may differ from actual rope lengths supplied when machinery is shipped.

Line speed: Single line on the first drum layerHoisting/Lowering: 120 to 3 m/min

Line Pull (Single-line):Rated line pull: 78.5 kN {8.0 tf}

Swing unit is powered by hydraulic motor driving spur gearsthrough planetary reducer, the swing system provides 360rotation.Swing parking brakes: A spring-set, hydraulically releasedmultiple-disc brake is mounted on swing motor.Swing circle: Single-row ball bearing with an integral internallycut swing gear.Swing lock: Manually, two position lock for transportationSwing speed: 4.0 min-1 {rpm}

Torsion-free precision machined upper frame. All componentsare located clearly and service friendly. Engine with low noiselevel. Complies with EC Directive 2000/14/EC.Counterweight: 25.7 ton

Power Plant

Load Hoist System

Hydraulic System

Boom Hoisting System

Swing System

Upper Structure

Cab & Control

Totally enclosed, full vision cab with safety glass, fullyadjustable, high backed seat with a head-rest and armrests,and intermittent wiper and window washer (skylight and frontwindow).Cab fittings:Air conditioner, convenient compartment (for tool), cup holder,ashtray, cigarette lighter, sun visor, roof blind, tinted glass, floormat, foot-rest, shoe trayControls:Boom hoist pedal, and four adjustable levers for front drum, reardrum, boom drum and swing controls.

Steel-welded carbody with axles. Crawler can be hydraulicallyextended for wide-track operation or retracted for transporta-tion. Crawler belt tension is maintained by hydraulic jack forceon the track-adjusting bearing block.Carbody weight: 6.7 tCrawler drive: Independent hydraulic propel drive is built intoeach crawler side frame. Each drive consists of a hydraulicmotor propelling a driving tumbler through a planetary gearbox. Hydraulic motor and gear box are built into the crawlerside frame within the shoe width.Crawler brakes: Spring-set, hydraulically released parkingbrakes are built into each propel drive.Steering mechanism: A hydraulic propel system provides bothskid steering (driving one track only) and counter-rotating steer-ing (driving each track in opposite directions).Track rollers: Sealed track rollers for maintenance-free opera-tion.

4

Lower Structure

Main Specifications (Model: CKE800-1F)

Shoes (flat): 63 shoes, 800 mm wide each crawlerMax. travel speed: 1.9/1.2 km/hMax. gradeability: 40%

Including upper and lower machine, 25.7 ton counterweight, 6.7ton carbodyweight, basic boom (or basic jib), hook, and otheraccessories.

Specification Weight Ground pressureCrane boom Approx. 73.8 ton, 88.0 kPa {0.9 kgf/cm2}Fixed Jib Approx. 76.1 ton, 91.0 kPa {0.93 kgf/cm2}

Boom and Jib:Welded lattice construction using tubular, high-tensile steelchords with pin connections between sections.Boom Length

Min. Length Max. Length(Min. Combination) (Max. Combination)

Crane Boom 9.1 m 54.9 m

Fixed Jib 30.5 m + 6.1 m 42.7 m + 18.3 m45.7 m + 12.2 m

Weight

Attachment

Crane BoomMax. Lifting Capacity 80 t/3.0 mMax. Length 54.9 mFixed JibMax. Lifting Capacity 6.6 t/20.0mMax. Combination 42.7 m + 18.3 m, 45.7 m + 12.2 mMain & Aux. WinchMax. Line Speed 120 m/min (1st layer)Rated Line Pull 78 kN {8.0 tf}Wire Rope 22 mmWire Rope Length 270 m (Main) 130 m (Aux.)Brake Type Spring set hydraulically released (Negative)Free-Fall Brake Type Wet-type multiple disc brake (Optional)Working SpeedSwing Speed 4.0 min-1 {rpm}Travel Speed 1.9/1.2 km/hPower PlantModel Hino J08E-TMEngine Output 159 kW/2,000 min-1 {rpm}Fuel Tank Capacity 400 liters

Hydraulic SystemMain Pumps 3 variable displacementMax. Pressure 31.9 MPa {325 kgf/cm2}Hydraulic Tank Capacity 440 litersSelf-Erection Device Standard counterweight removalWeightOperating Weight* Approx. 73.8 tGround Pressure* 88 kPa {0.9 kgf/cm2}Counterweight 25.7 t (Upper), 6.7t (Lower)Transport Weight** Approx. 41.2 t

Units are SI units. { } indicates conventional units.Line speeds in table are for light loads. Line speed varies with load.* Including upper and lower machine, 25.7 ton counterweight, 6.7t carbody

weight, basic boom, hook, and other accessories.** Base machine with gantry, boom base, crawlers, wire ropes for main and aux.

winches, lower spreader and upper spreader. (Refer to P14)

5GENERAL DIMENSIONS

5,130

5,990

3,390Retracted 800

390

4,830Extended

1,100

1,520

Crane Boom Length : 9.1 m 54.9 m

1,750

6,180

3,180

1,100

3,200

1,600

940

3,300

R4,250

5,235

Crane Boom

Limit of Hook Lifting

L L' Hook L80 t hook 4.5 m55 t hook 4.3 m32 t hook 4.2 m19 t hook 4.1 m

Hook L'6.6 t ball hook 3.1 m

(Unit: mm )

6Boom length m (ft) Boom arrangement

Boom length m (ft) Boom arrangement

39.6 (130)

36.6 (120)

33.5 (110)

42.7 (140)

45.7 (150)

48.8 (160)

51.8 (170)

54.9 (180)

9.1 (30)

12.2 (40)

15.2 (50)

18.3 (60)

21.3 (70)

24.4 (80)

27.4 (90)

30.5 (100)

mark shows the guy line installing position when the fixed jib is used. mark shows the standard boom arrangement which enables each boom length of less than that boom length to be configured.

Symbol Boom Length5.2 m3.9 m3.0 m6.1 m6.1 m9.1 m9.1 m

RemarksBoom BaseBoom Top

Insert BoomInsert Boom

Insert Boom with lugInsert Boom

Insert Boom with lug

10

20

20

30

T

B

30

3020

10 3010

3030

2010 2010

20 3020

30 3010

20 2010

20 3010

10 20 3010

10

10 10

20

2010

30

10 2010

20 20

3010

10 20 20 2010

30 3020

30 3010 10

20 20 3010

30 3030

2010 20 3010

3020 3010

3020 3020

10 20 30 3010

30 30 3010

2020 20 3010

2010 20 20 3010

30 3010 10 30

30 30 3020

20 20 30 3010

20 20 30 3010 10

3020 30 3010

3020 30 3020

10 3020 30 3010

10 20 20 20 30 3010

20 20 30 30 3010

10 20 20 30 30 3010

20 20 1030 30 3010

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

B

B

B

B

B

B

B

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

5.2 3.9

Crane Boom Arrangements

Jib length m (ft)6.1(20)

12.2 (40)

18.3 (60)Boom

Fixed Jib

B T20 20

B T3.0 3.0

B T20

T

20

B

Symbol Jib Length3.0 m3.0 m6.1 m

RemarksJib BaseJib Top

Insert Jib

Jib arrangement

30.5 m

45.7 m

30.5 m42.7 m

Crane boom length

Fixed Jib Arrangements

BOOM AND JIB ARRANGEMENTS

7A range of hook blocks can be specified, each with a safety latch.Hook Blocks

No. of lines and max. rated loads (tons)Hooks Weight (kg) No. of 1 2 3 4 5sheaves80-ton 800 5 40.055-ton 650 4 24.0 32.0 40.032-ton 500 2 16.0 24.0 32.0 19-ton 400 1 16.0 19.0 6.6-ton 160 0 6.6 ball hook

No. of lines and max. rated loads (tons)Hooks Weight (kg) No. of 6 7 8 9 10sheaves80-ton 800 5 48.0 56.0 64.0 72.0 80.055-ton 650 4 48.0 55.0 32-ton 500 2 19-ton 400 1 6.6-ton 160 0 ball hook

Symbols for Attachments:

Crane Boom Auxiliary Sheavefor Crane Boom Fixed JibCrane Boomwith Fixed Jib

8WORKING RANGESAND LIFTING CAPACITIES

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44

8

9

10

12

14

16

18

20

22

24

26

28

30

32

34

36

38

40

42

44

46

48

50

52

54

56

58

60

51.8m BOOM

54.9m BOOM

48.8m BOOM

45.7m BOOM

42.7m BOOM

39.6m BOOM

36.6m BOOM

33.5m BOOM

30.5m BOOM

27.4m BOOM

24.4m BOOM

21.3m BOOM

18.3m BOOM

15.2m BOOM

12.2m BOOM

9.1m BOOM

Center ofrotation

1.1 m 1.7

5 m

80 75 70 65 60 55

5050

4545

4040

3535

3030

Radius from center of rotation (m)

Hei

ght a

bov

e gr

ou

nd

(m)

Crane Boom Working Ranges

NOTES:1. Ratings according to EN13000.2. Ratings in metric tons for 360 working area.3. Operating radius is the horizontal distance from center of rotation to a

vertical line through the center of gravity of the load.4. Weight of hook block (s), slings and other load handling accessories is

included in rated load. Their total weight must be subtracted from ratedload to obtain weight that can be lifted.

5. Ratings shown are based on freely suspended loads and make noallowance for such factors as wind effect on lifted load, ground condi-tions, out-of-level, operating speeds or any other condition that could bedetrimental to the safe operation of this equipment. Operator, therefore,has the responsibility to judge the existing conditions and reduce liftedloads and operating speeds accordingly.

6. Ratings are for operation on a firm and level surface, up to 1% gradient.7. At radii and boom lengths where no ratings are shown on chart, opera-

tion is not intended nor approved.

8. Boom inserts and guy lines must be arranged as shown in theOperator's Manual.

9. Boom hoist reeving is 12 part line.10. Gantry must be in raised position for all conditions.11. Boom backstops are required for all boom lengths.12. Crawler frames must be fully extended for all crane operations.13. Ratings shown in are determined by the strength of the boom

or other structural component.14. Instruction in the Operator's Manual must be strictly observed when

operating the machine.15. Crane boom ratings: Deduct weight of main hook block, slings, and all

other load handling accessories from crane boom ratings shown.16. Auxiliary sheave ratings for crane boom: Deduct weight of ball hook,

slings, and all other load handling accessories from auxiliary sheave rat-ings for crane boom shown.

17. Crane boom lengths for auxiliary sheave mounting are 9.1 m to 51.8 m.

9Boom Length

(m)Working radius (m)

6.66.66.66.66.6

9.2m/6.6

1

6.66.66.66.66.66.6

11.9m/6.6

1

6.66.66.66.66.66.66.66.6

14.5m/6.6

1

9.1 12.2 15.2 18.3

5.5m/6.66.66.66.66.66.66.66.66.6

17.1m/6.6

1

21.3

6.66.66.66.66.66.66.66.66.6

19.8m/6.6

1

24.4

6.66.66.66.66.66.66.66.66.66.6

22.4m/6.6

1

27.4

6.66.66.66.66.66.66.66.66.66.66.6

25.1m/6.5

1

5.06.07.08.09.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.046.0

Reeves

5.06.07.08.09.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.046.0

Reeves

6.66.66.66.66.66.66.66.66.66.65.9

27.7m/5.4

1

30.5 33.5

6.66.66.66.66.66.66.66.66.66.65.85.24.6

30.3m/4.6

1

36.6

6.66.66.66.66.66.66.66.66.55.75.14.54.0

33.0m/3.8

1

39.6

6.66.66.66.66.66.66.66.35.64.94.43.93.5

35.0m/3.2

1

42.7

6.66.66.66.66.66.66.66.25.44.84.23.73.33.02.6

38.3m/2.6

1

6.66.66.66.66.66.66.15.34.74.13.63.22.92.52.3

40.9m/2.1

1

6.66.66.66.66.66.66.05.24.64.03.53.12.72.42.11.8

43.5m/1.7

1

6.66.66.66.66.66.65.95.14.53.93.43.02.62.32.01.71.51.31

45.7 48.8 51.8Boom Length (m) Working

radius (m)

45.7 51.848.8Boom Length (m) Working

radius (m)54.9

Boom Length

(m)Working radius (m)

80.069.057.947.539.832.926.0

9.2m/24.5

10

3.6m/76.272.657.747.339.632.727.824.1

11.9m/19.3

10

4.2m/69.657.546.738.932.527.623.918.815.4

14.5m/14.7

9

9.1 12.2 15.2 18.3

4.7m/59.355.144.637.332.027.523.818.715.312.9

17.1m/11.8

8

21.3

5.2m/50.042.635.830.927.023.718.615.112.710.9

19.8m/9.6

7

24.4

5.7m/42.940.834.529.826.223.318.515.012.610.89.38.2

22.4m/8.0

6

27.4

6.8m/33.032.027.824.521.917.914.812.310.59.17.97.06.2

27.7m/5.7

5

6.3m/37.233.328.825.422.618.414.912.510.79.28.17.2

25.1m/6.8

5

30.5

3.0 4.0 5.0 6.0 7.0 8.0 9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.046.048.050.0

Reeves

3.0 4.0 5.0 6.0 7.0 8.0 9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.046.048.050.0

Reeves

33.5

7.3m/29.526.923.821.317.414.712.210.49.07.86.96.15.54.9

30.3m/4.9

4

36.6

7.9m/26.426.023.120.616.914.212.110.38.87.76.86.05.44.84.3

33.0m/4.1

4

39.6

8.4m/24.022.420.016.513.911.910.28.77.66.65.95.24.74.23.8

35.0m/3.5

3

42.7

21.719.416.013.511.510.08.67.56.55.75.14.54.03.63.32.9

38.3m/2.9

3

9.4m/20.119.015.613.211.39.88.57.46.45.65.04.43.93.53.22.82.6

40.9m/2.4

3

18.415.112.810.99.48.37.26.35.54.94.33.83.43.02.72.42.1

43.5m/2.0

3

10.5m/17.114.812.510.79.38.17.16.25.44.84.23.73.32.92.62.32.01.81.6

3

11.0m/15.714.412.110.49.07.86.96.15.34.74.13.63.22.82.52.21.91.71.51.3

48.7m/1.22

Note: Ratings according to EN13000.Ratings shown in are determined by the strength of the boom or other structural components.Refer to notes P8.

Note: Ratings according to EN13000.Ratings shown in are determined by the strength of the boom or other structural components.Refer to notes P8.

Crane Boom Lifting Capacity

Auxiliary Sheave Lifting Capacity for Crane Boom (Without Main Hook)

Unit: metric tonCounterweight: 25.7 t, Carbody weight: 6.7 t

Unit: metric tonCounterweight: 25.7 t, Carbody weight: 6.7 t

10

Fixed Jib Working Ranges Jib Offset Angle: 10, 30

1.

75m

Center ofrotation1.10m

42.7 m BOOM + 18.3 m JIB

45.7 m BOOM + 12.2 m JIB

45.7 m BOOM + 6.1 m JIB

30.5 m BOOM + 6.1 m JIB

30.5 m BOOM + 12.2 m JIB

75

70

65

60

55

50

45

35

10 4025 5020

20

25

30

40

35 453015

30.5 m BOOM + 18.3 m JIB

Radius from center of rotation(m)

Hei

ght a

bove

gro

und(

m)

30

1010

NOTES:1. Ratings according to EN13000.2. Ratings in metric tons for 360 working area.3. Operating radius is the horizontal distance from center of rotation to a

vertical line through the center of gravity of the load.4. Weight of hook block (s), slings and other load handling accessories is

included in rated load. Their total weight must be subtracted from ratedload to obtain weight that can be lifted.

5. Ratings shown are based on freely suspended loads and make noallowance for such factors as wind effect on lifted load, ground condi-tions, out-of-level, operating speeds or any other condition that could bedetrimental to the safe operation of this equipment. Operator, therefore,has the responsibility to judge the existing conditions and reduce liftedloads and operating speeds accordingly.

6. Ratings are for operation on a firm and level surface, up to 1% gradient.7. At radii and boom lengths where no ratings are shown on chart, opera-

tion is not intended nor approved.

8. Boom/ jib inserts and guy lines must be arranged as shown in theOperator's Manual.

9. Boom hoist reeving is 12 part line.10. Gantry must be in raised position for all conditions.11. Boom backstops are required for all boom lengths.12. Crawler frames must be fully extended for all crane operations.13. Ratings shown in are determined by the strength of the boom

or other structural component.14. Instruction in the Operator's Manual must be strictly observed when

operating the machine.15. Fixed jib ratings: Deduct weight of jib hook block, slings, and all other

load handling accessories from fixed jib ratings shown.16. Crane boom lengths for jib mounting are 30.5 m to 45.7 m.17. Crane boom ratings with fixed jib: Deduct weight of jib hook block, slings,

and all other load handling accessories from crane boom ratings withfixed jib shown.

11

Fixed Jib Lifting Capacities (Without Main Hook)Jib Offset Angle: 10

Boom length (m)Jib length (m)

Wo

rkin

g ra

dius

(m)

6.16.66.66.66.66.66.66.66.15.44.74.23.83.4

1

12.2

6.66.66.66.66.66.45.65.04.44.03.63.22.92.6

1

6.16.66.66.66.66.66.66.66.05.24.64.13.63.22.92.6

1

12.2

6.66.66.66.66.66.25.54.84.33.83.43.12.82.52.32.0

1

18.3

4.54.54.54.54.54.54.54.43.93.53.22.92.62.42.11.91

33.56.1

6.66.66.66.66.66.65.95.14.54.03.53.12.82.52.2

1

12.2

6.66.66.66.66.66.25.44.84.23.73.33.02.72.42.11.91.61

18.3

4.54.54.54.54.54.54.54.33.93.53.12.82.52.32.01.81

30.5 Boom length (m)Jib length (m)

9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

Reeves

Wo

rking radius (m)

36.66.1

6.66.66.66.66.66.65.85.04.43.93.43.02.62.32.01.7

1

12.2

6.66.66.66.66.05.34.64.13.63.22.92.52.21.91.71.41

18.3

4.54.54.54.54.54.54.54.23.73.33.02.72.42.11.81.61 Reeves

9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

39.618.3

4.54.54.54.54.54.54.54.54.54.13.73.33.02.82.52.32.11

Boom length (m)Jib length (m)

Wo

rkin

g ra

dius

(m)

6.16.66.66.66.66.65.74.94.33.83.32.92.52.21.81.61.31.11

12.2

6.66.66.66.66.05.24.54.03.53.12.82.42.11.81.61.31

18.3

4.54.54.54.54.54.54.54.13.63.22.92.62.22.01.71.51

42.7 Boom length (m)Jib length (m)

12.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

Reeves

Wo

rking radius (m)

Reeves

12.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

6.16.66.66.66.66.55.64.84.23.63.22.72.32.01.61.41.1

1

12.2

6.66.66.66.65.85.14.43.93.43.02.62.21.91.61.41.11

45.7

Note: Ratings according to EN13000.Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P10.

Unit: metric tonCounterweight: 25.7 t, Carbody weight: 6.7 t

12

Boom length (m)Jib length (m)

Wo

rkin

g ra

dius

(m)

6.16.66.66.66.66.66.25.54.84.33.8

1

12.2

5.05.05.05.05.04.94.64.13.73.33.0

1

18.3

3.23.23.23.23.23.23.13.02.82.72.62.52.4

1

30.5 Boom length (m)Jib length (m)

12.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

Reeves

Wo

rking radius (m)

12.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

Reeves

6.16.66.66.66.66.66.15.44.74.23.73.3

1

12.2

5.05.05.05.05.05.04.54.03.63.22.92.6

1

18.3

3.23.23.23.23.23.23.23.02.92.82.72.52.32.11

6.16.66.66.66.66.66.15.34.64.13.63.22.9

1

12.2

5.05.05.05.05.05.04.43.93.53.12.82.52.2

1

18.3

3.23.23.23.23.23.23.13.02.92.72.52.22.01

33.5 36.66.16.66.66.66.66.65.95.24.54.03.53.12.72.32.0

1

12.2

5.05.05.05.05.04.94.33.83.43.02.72.42.11.81.51

18.3

3.23.23.23.23.23.23.23.12.92.62.32.11.81

39.6

Boom length (m)Jib length (m)

Wo

rkin

g ra

dius

(m)

6.16.66.66.66.65.95.14.43.93.43.02.62.21.91.6

1

12.2

5.05.05.05.04.84.33.83.33.02.62.32.01.71.41

18.3

3.23.23.23.23.23.23.23.22.82.52.32.01.71

Boom length (m)Jib length (m)

Reeves

Wo

rking radius (m)

14.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

42.7

14.016.018.020.022.024.026.028.030.032.034.036.038.040.042.044.0

Reeves

6.16.66.66.66.65.85.04.33.83.32.92.42.11.71.41.2

1

12.2

5.05.05.05.04.74.23.73.22.92.52.11.81.51.31

45.7

Jib Offset Angle: 30

Note: Ratings according to EN13000.Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P10.

Unit: metric tonCounterweight: 25.7 t, Carbody weight: 6.7 t

13

Crane Boom Lifting Capacity with Fixed Jib

Boom length (m)Jib length (m)

Wo

rkin

g ra

dius

(m)

6.16.8m/31.930.9 26.7 23.4 20.8 16.8 13.7 11.2 9.4 8.0 6.8 5.9 5.1

27.7m/4.6

4

12.26.8m/31.430.4 26.2 22.9 20.3 16.3 13.2 10.7 8.9 7.5 6.3 5.4 4.6

27.7m/4.1

4

6.1

7.3m/28.624.621.519.115.312.610.48.67.26.15.24.53.93.4

30.3m/2.9

4

12.2

7.3m/28.124.121.018.614.812.19.98.16.75.64.74.03.42.9

30.3m/2.4

4

18.3

7.3m/27.623.620.518.114.311.69.47.66.25.14.23.52.92.4

30.3m/1.9

4

33.56.1

7.9m/25.623.820.918.514.912.310.38.57.16.05.14.43.83.22.8

33.0m/2.4

4

12.2

7.9m/25.123.320.418.014.411.89.88.06.65.54.63.93.32.72.3

33.0m/1.9

4

18.3

7.9m/24.622.819.917.513.911.39.37.56.15.04.13.42.82.21.8

33.0m/1.4

4

30.5 Boom length (m)Jib length (m)

6.0 7.0 8.0 9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.0

Reeves

Wo

rking radius (m)

36.66.1

8.4m/22.921.318.915.412.810.89.17.66.55.54.84.13.63.12.7

35.0m/2.43

12.2

8.4m/22.420.818.414.912.310.38.67.16.05.04.33.63.12.62.2

35.0m/1.93

18.3

8.4m/21.920.317.914.411.89.88.16.65.54.53.83.12.62.11.7

35.0m/1.43 Reeves

6.0 7.0 8.0 9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.0

39.618.3

6.8m/30.929.9 25.7 22.4 19.8 15.8 12.7 10.2 8.4 7.0 5.8 4.9 4.1

27.7m/3.6

4

Boom length (m)Jib length (m) 6.1

20.618.314.912.410.48.97.56.45.44.64.03.42.92.52.21.8

38.3m/1.8

3

12.220.117.814.411.99.98.47.05.94.94.13.52.92.42.01.71.3

38.3m/1.3

3

18.319.617.313.911.49.47.96.55.44.43.63.02.41.91.51.2

3

42.7 Boom length (m)Jib length (m)

Wo

rkin

g ra

dius

(m)

9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.0

Reeves

Wo

rking radius (m)

Reeves

9.010.012.014.016.018.020.022.024.026.028.030.032.034.036.038.040.042.0

6.19.4m/19.017.914.512.110.28.77.46.35.34.53.93.32.82.42.11.71.5

40.9m/1.33

12.29.4m/18.517.414.011.69.78.26.95.84.84.03.42.82.31.91.61.2

3

18.39.4m/18.016.913.511.19.27.76.45.34.33.52.92.31.81.41.1

3

45.7

Note: Ratings according to EN13000.Refer to notes P10.

Unit: metric tonCounterweight: 25.7 t, Carbody weight: 6.7 t

14

Boom Top (with guy cables)Weight: 1,160 kg

Boom BaseWeight: 1,130 kg

Base MachineWith gantry, boom base, crawlers, wire ropes for main and aux. winches,lower spreader and upper spreaderWeight: 41,240 kg Width: 3,390mm

Base MachineWith gantry, crawlers, wire ropes for main and aux. winchesWeight: 38,940 kg Width: 3,390mm

PARTS AND ATTACHMENTS

Attachment Weight Dimensions (L x W x H)

Note: Estimated weights may vary 2%

360 kg (with guy cables) 3,160 mm x 1,510 mm x 1,515 mm

6.1 m insert boom3.0 m insert boom

600 kg (with guy cables) 6,210 mm x 1,510 mm x 1,515 mm

6.1 m insert boom with lug 620 kg (with guy cables) 6,210 mm x 1,510 mm x 1,645 mm9.1 m insert boom 840 kg (with guy cables) 9,260 mm x 1,510 mm x 1,515 mm9.1 m insert boom with lug 860 kg (with guy cables) 9,260 mm x 1,510 mm x 1,645 mmJib top 145 kg 3,475 mm x 675 mm x 625 mmJib base 125 kg 3,190 mm x 675 mm x 625 mm6.1 m insert jib 165 kg (with guy cables) 6,160 mm x 675 mm x 625 mmJib strut 190 kg 3,700 mm x 670 mm x 500 mmAuxiliary sheave 140 kg 1,010 mm x 1,310 mmCrawler (1pc) 6,950 kg 5,990 mm x 800 mm x 980 mmUpper spreader 280 kg 1,580 mm x 300 mm x 680 mmLower spreader 170 kg 870 mm x 300 mm x 610 mm

80-ton hook block 800 kg 600 mm x 530 mm x 1,705 mm

32-ton hook block 500 kg 590 mm x 330 mm x 1,530 mm55-ton hook block 650 kg 590 mm x 435 mm x 1,470 mm

19-ton hook block 400 kg 590 mm x 385 mm x 1,270 mm6.6-ton ball hook 160 kg 815 mm x 300 mm dia.

Other Attachments

Counterweight BWeight: 7,370 kg

Counterweight CWeight: 9,350 kg

CarbodyweightWeight: 3,340 kg (1 pc)

Counterweight AWeight: 8,990 kg

Dimensions: mm, Weight: kg

HYDRAULIC CRAWLER CRANE

Standard Equipment

Counterweight: 25.7 ton (total weight)Carbody weight: 6.7 ton (total weight)800 mm shoe crawlersBatteries (150 Ah/20HR)Travel kitGantry raising/lowering cylinder Electric hand throttle gripVariable boom hoist speed controllerSide deck for cabSteps (crawlers)Two front working lightsUpper spreader storage guideTools (for routine maintenance)Two rear view mirrorsMirror for monitoring drumsElectric fuel pumpCounterweight self removalCable roller (for boom)Tool box (front of left-side guard)

Load Moment Indicator (with boom lowering slow stop function)LMI release key (for hook over-hoist prevention deviceand boom over-hoist prevention device)LCD multi displayUltimate stop function for boom over-hoistFunction lock leverPropel lever lockMechanical drum lock pawl (main, aux. and boom hoist)Signal hornSwing parking brakeMechanical swing lock pin (two positions)Swing flashers/warning buzzerCab window guard (left side)Cab top guardFire extinguisherExternal lamp for over-load alarmLife hammer

Upper structure/Lower structure

Boom hoist pedal (EU area only)Air conditionerCup holderAshtrayCigar lighterIntermittent wiper & window washer(skylight and front window)Sun visorRoof blindFloor mat (cloth)Foot restShoe trayLevel gauge (operator cabin)

Cab/Control

Safety Device

Bulletin No. CKE800-1FSPEC-EU2 070301IF Printed in JapanKOBELCO is the corporate mark used by Kobe Steel on a variety of productsand in the names of a number of Kobe Steel Group companies.

17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPANTel: +81-3-5789-2130 Fax: +81-3-5789-3372

Note: Standard equipment may vary depending on your areas or countries.Due to our policy of continual product improvements all designs and specifications are subject to change without advance notice.Copyright by KOBELCO CRANES CO., LTD. No part of this catalog may be reproduced in any manner without notice.

Inquiries To: