7636v1.0(G52-76361X3)(H55M-E33_H55M-P31)Euro

H55M-E33 / H55M-P31 seresMS-7636 (v1.x) Manboard

G52-76361X3

Preface

Copyrght NotceThe materal n ths document s the ntellectual property of MICRO-STAR INTERNA-TIONAL. We take every care n the preparaton of ths document, but no guarantee s gven as to the correctness of ts contents. Our products are under contnual mprove-ment and we reserve the rght to make changes wthout notce.

TrademarksAll trademarks are the propertes of ther respectve owners.

MSI s regstered trademark of Mcro-Star Intl Co.,Ltd.NVIDIA s regstered trademark of NVIDIA Corporaton.ATI s regstered trademark of ATI Technologes, Inc.AMD s regstered trademarks of AMD Corporaton.Intel s regstered trademarks of Intel Corporaton.Wndows s regstered trademarks of Mcrosoft Corporaton.AMI s regstered trademark of Amercan Megatrends, Inc.Award s a regstered trademark of Phoenx Technologes Ltd.Sound Blaster s regstered trademark of Creatve Technology Ltd.Realtek s regstered trademark of Realtek Semconductor Corporaton.JMcron s regstered trademark of JMcron Technology Corporaton.Netware s a regstered trademark of Novell, Inc.

Revson HstoryRevson Revson Hstory DateV1.0 Frst release for Europe November 2009

Techncal SupportIf a problem arses wth your system and no soluton can be obtaned from the users manual, please contact your place of purchase or local dstrbutor. Alternatvely, please try the followng help resources for further gudance.

Vst the MSI webste for FAQ, techncal gude, BIOS updates, drver updates, and other nformaton: http://www.ms.com/ndex.php?func=servce

Contact our techncal staff at: http://ocss.ms.com

MS-7636

Safety InstructonsAlways read the safety nstructons carefully.Keep ths Users Manual for future reference.Keep ths equpment away from humdty.Lay ths equpment on a relable flat surface before settng t up.The openngs on the enclosure are for ar convecton hence protects the equpment from overheatng. DO NOT COVER THE OPENINGS.Make sure the voltage of the power source and adjust properly 110/220V before connectng the equpment to the power nlet.Place the power cord such a way that people can not step on t. Do not place any-thng over the power cord.Always Unplug the Power Cord before nsertng any add-on card or module.All cautons and warnngs on the equpment should be noted.Never pour any lqud nto the openng that could damage or cause electrcal shock.If any of the followng stuatons arses, get the equpment checked by servce personnel:

The power cord or plug s damaged.

Lqud has penetrated nto the equpment.

The equpment has been exposed to mosture.

The equpment does not work well or you can not get t work accordng to Users Manual.

The equpment has dropped and damaged.

The equpment has obvous sgn of breakage.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY DAMAGE THE EQUIPMENT.

CAUTION: Danger of exploson f battery s ncorrectly replaced. Replace only wth the same or equvalent type recommended by the manufacturer.

:

For better envronmental protecton, waste batteres should be collected separately for recyclng specal dsposal.

v

Preface

FCC-B Rado Frequency Interference StatementThs equpment has been tested and found to comply wth the lmts for a Class B dg-tal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nter-ference n a resdental nstallaton. Ths equpment generates, uses and can radate rado frequency energy and, f not nstalled and used n accordance wth the nstruc-tons, may cause harmful nterference to rado communcatons. However, there s no guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment does cause harmful nterference to rado or televson recepton, whch can be deter-mned by turnng the equpment off and on, the user s encouraged to try to correct the nterference by one or more of the measures lsted below.

Reorent or relocate the recevng antenna.

Increase the separaton between the equpment and recever.

Connect the equpment nto an outlet on a crcut dfferent from that to whch the recever s connected.

Consult the dealer or an experenced rado/televson techncan for help.

Notce 1The changes or modficatons not expressly approved by the party responsble for com-plance could vod the users authorty to operate the equpment.Notce 2Shelded nterface cables and A.C. power cord, f any, must be used n order to comply wth the emsson lmts.

VOIR LA NOTICE DINSTALLATION AVANT DE RACCORDER AU RESEAU.

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the follow-ng two condtons:

ths devce may not cause harmful nterference, and ths devce must accept any nterference receved, ncludng nterference that may cause undesred operaton.

1)2)

Mcro-Star InternatonalMS-7636

v

MS-7636

WEEE (Waste Electrcal and Electronc Equpment) Statement

ENGLISHTo protect the global envronment and as an envronmentalst, MSI must re-mnd you that...Under the European Unon (EU) Drectve on Waste Electrcal and Elec-tronc Equpment, Drectve 2002/96/EC, whch takes effect on August 13, 2005, products of electrcal and electronc equpment cannot be dscarded as muncpal waste anymore and manufacturers of covered electronc equp-ment wll be oblgated to take back such products at the end of ther useful lfe. MSI wll comply wth the product take back requrements at the end of lfe of MSI-branded prod-ucts that are sold nto the EU. You can return these products to local collecton ponts.

DEUTSCHHnwes von MSI zur Erhaltung und Schutz unserer UmweltGem der Rchtlne 2002/96/EG ber Elektro- und Elektronk-Altgerte drfen Elek-tro- und Elektronk-Altgerte ncht mehr als kommunale Abflle entsorgt werden. MSI hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n de Europsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus zurckzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-schlesslch an ener lokalen Altgertesammelstelle n Ihrer Nhe.

FRANAISEn tant qucologste et afin de protger lenvronnement, MSI tent rappeler cec...Au sujet de la drectve europenne (EU) relatve aux dchets des qupement lec-trques et lectronques, drectve 2002/96/EC, prenant effet le 13 aot 2005, que les produts lectrques et lectronques ne peuvent tre dposs dans les dcharges ou tout smplement ms la poubelle. Les fabrcants de ces qupements seront oblgs de rcuprer certans produts en fin de ve. MSI prendra en compte cette exgence relatve au retour des produts en fin de ve au sen de la communaut europenne. Par con-squent vous pouvez retourner localement ces matrels dans les ponts de collecte.

MSI , , .... () ( WEEE 2002/96/EC), 13 2005 , , , , . MSI , MSI EC, . .

v

Preface

ESPAOLMSI como empresa comprometda con la proteccn del medo ambente, recomenda:Bajo la drectva 2002/96/EC de la Unn Europea en matera de desechos y/o equ-pos electrncos, con fecha de rgor desde el 13 de agosto de 2005, los productos clasficados como elctrcos y equpos electrncos no pueden ser depostados en los contenedores habtuales de su muncpo, los fabrcantes de equpos electrncos, estn oblgados a hacerse cargo de dchos productos al termno de su perodo de vda. MSI estar comprometdo con los trmnos de recogda de sus productos venddos en la Unn Europea al final de su perodo de vda. Usted debe depostar estos productos en el punto lmpo establecdo por el ayuntamento de su localdad o entregar a una empresa autorzada para la recogda de estos resduos.

NEDERLANDSOm het mleu te beschermen, wl MSI u eraan hernneren dat.De rchtljn van de Europese Une (EU) met betrekkng tot Vervulng van Electrsche en Electronsche producten (2002/96/EC), de op 13 Augustus 2005 n zal gaan kun-nen net meer beschouwd worden als vervulng. Fabrkanten van dt soort producten worden verplcht om producten retour te nemen aan het end van hun levenscyclus. MSI zal overeenkomstg de rchtljn handelen voor de producten de de merknaam MSI dragen en verkocht zjn n de EU. Deze goederen kunnen geretourneerd worden op lokale nzamelngspunten.

SRPSKIDa b zattl prrodnu srednu, kao preduzee koje vod rauna o okoln prrodnoj sredn, MSI mora da vas podest daPo Drektv Evropske unje (EU) o odbaenoj ekektronskoj elektrnoj oprem, D-rektva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, prozvod koj spadaju pod elektronsku elektrnu opremu ne mogu ve bt odbaen kao oban otpad prozvoa ove opreme be prnuen da uzmu natrag ove prozvode na kraju njhovog uobajenog veka trajanja. MSI e potovat zahtev o preuzmanju ovakvh prozvoda kojma je stekao vek trajanja, koj maju MSI oznaku koj su prodat u EU. Ove proz-vode moete vratt na lokalnm mestma za prkupljanje.

POLSKIAby chron nasze rodowsko naturalne oraz jako firma dbajca o ekolog, MSI przy-pomna, e...Zgodne z Dyrektyw Un Europejskej (UE) dotyczc odpadw produktw elektry-cznych elektroncznych (Dyrektywa 2002/96/EC), ktra wchodz w yce 13 serpna 2005, tzw. produkty oraz wyposaene elektryczne elektronczne ne mog by trak-towane jako mec komunalne, tak wc producenc tych produktw bd zobowzan do odberana ch w momence gdy produkt jest wycofywany z uyca. MSI wypen wymagana UE, przyjmujc produkty (sprzedawane na terene Un Europejskej) wy-cofywane z uyca. Produkty MSI bdze mona zwraca w wyznaczonych punktach zborczych.

v

MS-7636

TRKEevrec zellyle blnen MSI dnyada evrey korumak n hatrlatr:Avrupa Brl (AB) Kararnames Elektrk ve Elektronk Malzeme At, 2002/96/EC Kararnames altnda 13 Austos 2005 tarhnden tbaren geerl olmak zere, elektrkl ve elektronk malzemeler der atklar gb pe atlamayacak ve bu elektonk chazlarn retcler, chazlarn kullanm sreler bttkten sonra rnler ger toplamakla ykml olacaktr. Avrupa Brlne satlan MSI markal rnlern kullanm sreler bttnde MSI rnlern ger alnmas ste le brl ersnde olacaktr. rnlernz yerel toplama noktalarna brakablrsnz.

ESKYZle nm na ochran votnho prosted - spolenost MSI upozoruje...Podle smrnce Evropsk une (EU) o lkvdac elektrckch a elektronckch vrobk 2002/96/EC platn od 13. srpna 2005 je zakzno lkvdovat elektrck a elektronck vrobky v bnm komunlnm odpadu a vrobc elektronckch vrobk, na kter se tato smrnce vztahuje, budou povnn odebrat takov vrobky zpt po skonen je-jch votnost. Spolenost MSI spln poadavky na odebrn vrobk znaky MSI, prodvanch v zemch EU, po skonen jejch votnost. Tyto vrobky mete odevzdat v mstnch sbrnch.

MAGYARAnnak rdekben, hogy krnyezetnket megvdjk, lletve krnyezetvdknt fellpve az MSI emlkeztet nt, hogy ...Az Eurpa Un (EU) 2005. augusztus 13-n hatlyba lp, az elektromos s elek-tronkus berendezsek hulladkarl szl 2002/96/EK rnyelve szernt az elektromos s elektronkus berendezsek tbb nem kezelhetek lakossg hulladkknt, s az lyen elektronkus berendezsek gyrt kteless vlnak az lyen termkek vsszav-telre azok hasznos lettartama vgn. Az MSI betartja a termkvsszavtellel kapc-solatos kvetelmnyeket az MSI mrkanv alatt az EU-n bell rtkestett termkek esetben, azok lettartamnak vgn. Az lyen termkeket a legkzelebb gyjthelyre vhet.

ITALIANOPer proteggere lambente, MSI, da sempre amca della natura, t rcorda che.In base alla Drettva dellUnone Europea (EU) sullo Smaltmento de Materal Elettrc ed Elettronc, Drettva 2002/96/EC n vgore dal 13 Agosto 2005, prodott appartenent alla categora de Materal Elettrc ed Elettronc non possono p essere elmnat come rfiut muncpal: produttor d dett materal saranno obblgat a rtrare ogn prodotto alla fine del suo cclo d vta. MSI s adeguer a tale Drettva rtrando tutt prodott marchat MSI che sono stat vendut allnterno dellUnone Europea alla fine del loro cclo d vta. possble portare prodott nel p vcno punto d raccolta

v

Preface

CONTENTSCopyrght Notce ............................................................................................ Trademarks .................................................................................................... Revson Hstory............................................................................................. Techncal Support.......................................................................................... Safety Instructons .........................................................................................FCC-B Rado Frequency Interference Statement.......................................... vWEEE (Waste Electrcal and Electronc Equpment) Statement .................... vEnglsh ...................................................................................................... En-1

Manboard Specficatons ...................................................................................En-2Quck Components Gude ..................................................................................En-4CPU (Central Processng Unt) ..........................................................................En-5Memory ..............................................................................................................En-9Power Supply ...................................................................................................En-11Back Panel .......................................................................................................En-12Connectors .......................................................................................................En-14Jumpers ...........................................................................................................En-20Swtch ...............................................................................................................En-21Slots .................................................................................................................En-22LED Status Indcators ......................................................................................En-23BIOS Setup ......................................................................................................En-24Software Informaton ........................................................................................En-36

Deutsch .................................................................................................... De-1Spezficatonen .................................................................................................. De-2Komponenten-berscht ................................................................................... De-4CPU (Prozessor) ............................................................................................... De-5Specher ............................................................................................................ De-9Stromversorgung ............................................................................................. De-11Rcktafel ......................................................................................................... De-12Anschlssen .................................................................................................... De-14Steckbrcke .................................................................................................... De-20Schalter ........................................................................................................... De-21Steckpltze ...................................................................................................... De-22LED Statusdkatoren ....................................................................................... De-23BIOS Setup ..................................................................................................... De-24Software-Informaton ....................................................................................... De-36

x

MS-7636

Franas ..................................................................................................... Fr-1Spcficatons ......................................................................................................Fr-2Gude Rapde Des Composants ..........................................................................Fr-4Processeur : CPU ...............................................................................................Fr-5Mmore ..............................................................................................................Fr-9Connecteurs dAlmentaton ..............................................................................Fr-11Panneau Arrre ................................................................................................Fr-12Connecteurs ......................................................................................................Fr-14Cavalers ...........................................................................................................Fr-20Interrupteur ........................................................................................................Fr-21Emplacements ..................................................................................................Fr-22Indcateurs De Statut LED .................................................................................Fr-23Rglage BIOS ...................................................................................................Fr-24Informaton De Logcel .....................................................................................Fr-36

.................................................................................................... Ru-1 ............................................................................................... Ru-2 ................................................ Ru-4CPU ( ) ...................................................................... Ru-5 .............................................................................................................. Ru-9 ............................................................................................. Ru-11 ............................................................................................... Ru-12 .................................................................................................... Ru-14 ..................................................................................................... Ru-20 .............................................................................................. Ru-21 ............................................................................................................. Ru-22 ................................................................................... Ru-23 BIOS ............................................................................................. Ru-24 ...................................................... Ru-36

Englsh

Europe verson

H55M-E33 /H55M-P31 Seres

En-2

MS-7636 Manboard

Mainboard SpecificationS

Processor SupportIntel Core 7, Core 5 (Lynnfield & Clarkdale), Core 3 and Pentum processor n the LGA1156 package(For the latest nformaton about CPU, please vst http://www.ms.com/ndex.php?func=cpuform2)

Base Clock133 MHz

ChpsetIntel H55 chpset

Memory Support4 DDR3 DIMMs support DDR3 2133*(OC)/ 2000*(OC) /1600*(OC)/ 1333/ 1066 DRAM (16GB Max)Supports Dual-Channel mode*(For more nformaton on compatble components, please vst http://www.ms.com/ndex.php?func=testreport)

LANSupports LAN 10/100/1000 by Realtek RTL8111DL

AudoChp ntegrated by Realtek ALC889 (True Blu-ray Audo)Flexble 8-channel audo wth jack sensngComplant wth Azala 1.0 Spec

IDE (optonal)1 IDE port by JMcron JMB368Supports Ultra DMA 100/133 modeSupports PIO, Bus Master operaton mode

SATA6 SATA 3Gb/s (SATA1~6) ports by Intel H55

ConnectorsBack panel

1 PS/2 keyboard port1 PS/2 mouse port6 USB 2.0 ports1 HDMI port* (optonal)1 VGA port*1 DVI port* (optonal)1 LAN port6 flexble audo ports (for H55M-E33)3 flexble audo ports (for H55M-P31)

*(The HDMI, VGA and DVI ports only work wth Integrated Graphcs Processor)On-Board

3 USB 2.0 connectors 1 Chasss Intruson connector

---------

--

En-3

Englsh

1 CD-In connector1 S/PDIF-Out connector1 Front Panel Audo connector1 TPM Module connector1 Parallel connector2 Seral connectors

Slots1 PCI Express 2.0 x16 slot2 PCI Express 2.0 x1 slots1 PCI slot, support 3.3V/ 5V PCI bus Interface

Form FactorATX (24.4cm X 24.0 cm)

Mountng 6 mountng holes

If you need to purchase accessores and request the part numbers, you could search the product web page and find detals on our web address belowhttp://www.ms.com/ndex.php

------

En-4

MS-7636 Manboard

Quick coMponentS Guide

Back Panel, En-12

CPU, En-5

CPUFAN, En-16

DDR3, En-9

JLPT1, En-18

JPWR2, En-11

JPWR1, En-11

IDE1, En-14

SYSFAN2, En-16

SATA1~6, En-15

JFP1, JFP2, En-16

JUSB1~3, En-17

JCOM1,JCOM2 En-15

JSP1, En-18

JCD1, En-17

JAUD1, En-19

PCI, En-22

JCI1, En-14

JTPM1, En-19

PCIE, En-22

SYSFAN1, En-16

JBAT, En-20

OC_SW1, En-21

En-5

Englsh

cpu (central proceSSinG unit)When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng. If you do not have the CPU cooler, consult your dealer before turnng on the computer.For the latest nformaton about CPU, please vst http://www.ms.com/ndex.php?func=cpuform2

ImportantOverheatngOverheatng wll serously damage the CPU and system. Always make sure the coolng fan can work properly to protect the CPU from overheatng. Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to enhance heat dsspaton.Replacng the CPUWhle replacng the CPU, always turn off the ATX power supply or unplug the power supplys power cord from the grounded outlet first to ensure the safety of CPU.OverclockngThs manboard s desgned to support overclockng. However, please make sure your components are able to tolerate such abnormal settng, whle dong overclockng. Any attempt to operate beyond product specficatons s not recommended. We do not guar-antee the damages or rsks caused by nadequate operaton or beyond product spec-ficatons.

Introducton to LGA 1156 CPUThe pn-pad sde of LGA 1156 CPU. The surface of LGA 1156 CPU. Remem-

ber to apply some thermal paste on t for better heat dsperson.

Algnment Key

Yellow trangle s the Pn 1 ndcator

Algnment Key

Yellow trangle s the Pn 1 ndcator

En-6

MS-7636 Manboard

CPU & Cooler InstallatonWhen you are nstallng the CPU, make sure the CPU has a cooler attached on the top to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU before nstallng the heat snk/cooler fan for better heat dsperson. Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll cause the damage of your CPU & manboard.

Open the load level. 1. Lft the load lever up to fully open poston

2.

The CPU socket has a plastc cap on t to protect the contact from damage. Before you nstall CPU, always cover t to protect the socket pn. Romove the cap (as the arrow shows).

3. After confirmng the CPU drecton for correct matng, put down the CPU n the socket housng frame. Be sure to grasp on the edge of the CPU base. Note that the algnment keys are matched.

4.

Algnment Key

En-7

Englsh

Vsually nspect f the CPU s seated well nto the socket. If not, take out the CPU wth pure vertcal moton and renstall.

5. Engage the load lever whle pressng down lghtly onto the load plate.

6.

Secure the lever near the hook end under the retenton tab.

7. Make sure the four hooks are n por-per poston before you nstall the cooler.

8.

ImportantConfirm f your CPU cooler s firmly nstalled before turnng on your system.Do not touch the CPU socket pns to avod damagng.

Algnment Key

En-8

MS-7636 Manboard

Manboard

Hook

ImportantRead the CPU status n BIOS.Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc cap covered (shown n Fgure 1) to avod damagng.Manboard photos shown n ths secton are for demonstraton of the CPU/ cooler n-stallaton only. The appearance of your manboard may vary dependng on the model you purchase.Please refer to the documentaton n the CPU fan package for more detals about the CPU fan nstallaton.

Algn the holes on the manboard wth the heatsnk. Push down the cooler untl ts four clps get wedged nto the holes of the manboard.

9. Press the four hooks down to fasten the cooler.

10.

Turn over the manboard to confirm that the clp-ends are correctly n-serted.

11. Fnally, attach the CPU Fan cable to the CPU fan connector on the man-board.

12.

En-9

Englsh

MeMoryThese DIMM slots are used for nstallng memory modules. For more nformaton on compatble components, please vst http://www.ms.com/ndex.php?func=testreport

DDR3240-pn, 1.5V

48x2=96 pn 72x2=144 pn

Memory Populaton RulePlease refer to the followng llustratons for memory populaton rules.Dual-Channel mode Populaton RuleIn Dual-Channel mode, the memory modules can transmt and receve data wth two data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system performance. The followng llustratons explan the populaton rules for Dual-Channel mode.

1

DIMM2

DIMM1

DIMM4

DIMM3

2

DIMM2

DIMM1

DIMM4

DIMM3

ImportantDDR3 memory modules are not nterchangeable wth DDR2 and the DDR3 standard s not backwards compatble. You should always nstall DDR3 memory modules n the DDR3 DIMM slots.In Dual-Channel mode, make sure that you nstall memory modules of the same type and densty n dfferent channel DIMM slots.To enable successful system boot-up (Lynnfield CPU especally), always nsert the memory modules nto the DIMM1 first.Due to the chpset resource deployment, the system densty wll only be detected up to 15+GB (not full 16GB) when each DIMM s nstalled wth a 4GB memory module.

InstalledEmpty

En-10

MS-7636 Manboard

Installng Memory ModulesThe memory module has only one notch on the center and wll only fit n the rght orentaton.Insert the memory module vertcally nto the DIMM slot. Then push t n untl the golden finger on the memory module s deeply nserted n the DIMM slot. The plastc clp at each sde of the DIMM slot wll automatcally close when the memory module s properly seated.Manually check f the memory module has been locked n place by the DIMM slot clps at the sdes.

Notch

Volt

ImportantYou can barely see the golden finger f the memory module s properly nserted n the DIMM slot.

1.

2.

3.

En-11

Englsh

power SupplyATX 24-pn Power Connector: JPWR1Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX 24-pn power supply, make sure the plug of the power supply s nserted n the proper orentaton and the pns are algned. Then push down the power supply firmly nto the connector.You may use the 20-pn ATX power supply as you lke. If youd lke to use the 20-pn ATX power supply, please plug your power supply along wth pn 1 & pn 13.

13.+3.3V

1.+3.3V

14.-12V

2.+3.3V

15.Ground

3.Ground

16.PS-ON#

4.+5V

17.Ground

5.Ground

18.Ground

6.+5V

19.Ground

7.Ground

22.+5V

10.+12V

20.Res

8.PWR OK

23.+5V

11.+12V

21.+5V

9.5VSB

24.Ground

12.+3.3V

ATX 4-pn Power Connector: JPWR2Ths connector s used to provde the power output to the CPU.

4.+12V

2.Ground

3.+12V

1.Ground

ImportantMake sure that all the connectors are connected to proper ATX power supples to ensure stable operaton of the manboard.Power supply of 400 watts (and above) s hghly recommended for system stablty.ATX 12V power connecton should be greater than 18A.

En-12

MS-7636 Manboard

back panel

Mouse/KeyboardThe standard PS/2 mouse/keyboard DIN connector s for a PS/2 mouse/keyboard.

USB PortThe USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard, mouse, or other USB-compatble devces.

LAN The standard RJ-45 LAN jack s for connecton to the Local Area Network (LAN). You can connect a network cable to t.

LED Color LED State Condton

Left Yellow Off LAN lnk s not establshed.

On(Steady state) LAN lnk s establshed.

On(brghter & pulsng) The computer s communcatng wth another computer on the LAN.

Rght Green Off 10 Mbts/sec data rate s selected.

On 100 Mbts/sec data rate s selected.

Orange On 1000 Mbts/sec data rate s selected.

Mouse/Keyboard

USB Port

LAN

Lne-In

Lne-Out

Mc

RS-Out

CS-Out

SS-Out

HDMI Port

USB Port

Yellow Green/ Orange

USB Port

VGA Port

DVI Port

Mouse/Keyboard

USB Port

LAN

Lne-In

Lne-Out

Mc

USB Port

USB Port

VGA Port

H55M-E33 back panal

H55M-P31 back panal

En-13

Englsh

VGA PortThe DB15-pn female connector s provded for montor.

HDMI Port (optonal)The Hgh-Definton Multmeda Interface (HDMI) s an all-dgtal audo/vdeo nterface capable of transmttng uncompressed streams. HDMI supports all TV format, ncludng standard, enhanced, or hgh-definton vdeo, plus mult-channel dgtal audo on a sngle cable.

DVI Port (optonal)The DVI (Dgtal Vsual Interface) connector allows you to connect a LCD montor. It provdes a hgh-speed dgtal nterconnecton between the computer and ts dsplay devce. To connect an LCD montor, smply plug your montor cable nto the DVI connector, and make sure that the other end of the cable s properly connected to your montor (refer to your montor manual for more nformaton.)

ImportantThe VGA, HDMI and DVI dsplay nterfaces on the manboard are desgned to serve as IGP (Integrated Graphcs Processor) used. If you nstalled a processor wthout ntegrated graphcs chp, these dsplay ports wll have no effect.

Audo PortsThese audo connectors are used for audo devces. It s easy to dfferentate between audo effects accordng to the color of audo jacks.

Lne-In: Blue - Lne In, s used for external CD player, tape-player or other audo devces. Lne-Out: Green - Lne Out, s a connector for speakers or headphones.Mc: Pnk - Mc, s a connector for mcrophones. RS-Out: Black (optonal) - Rear-Surround Out n 4/ 5.1/ 7.1 channel mode. CS-Out: Orange (optonal)- Center/ Subwoofer Out n 5.1/ 7.1 channel mode.SS-Out: Gray (optonal)- Sde-Surround Out 7.1 channel mode.

ImportantTo reach the 8-channel sound effect, the 7th and 8th channels must be output from front panel f you purchase the manboard wth 3 audo jacks.

En-14

MS-7636 Manboard

connectorS

IDE Connector: IDE1 (optonal)Ths connector supports IDE hard dsk drves, optcal dsk drves and other IDE de-vces.

CD-ROMMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkd

fdfasdddffasdfddd

ddddfdasfdasa

sdfasd asd asdddddddf

asasdfsdf fsdfadff fasdff f

df

Floppy DMSIFloppy DMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkdf

dfasdddffasdfdd

dddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf fsdfadf ff asdf ff

df

Floppy DMSIK dkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkd

fdfasdddf fasdfddd

ddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf fsdfadff fasdf ff d

f

3 1/2" F lop

py Disk D r i

ve Connect

or

3 1/2" Fl op

py Disk Dr

i ve Connecto

r

ImportantIf you nstall two IDE devces on the same cable, you must configure the drves sepa-rately to master / slave mode by settng jumpers. Refer to IDE devces documentaton suppled by the vendors for jumper settng nstructons.

Chasss Intruson Connector: JCI1Ths connector connects to the chasss ntruson swtch cable. If the chasss s opened, the chasss ntruson mechansm wll be actvated. The system wll record ths status and show a warnng message on the screen. To clear the warnng, you must enter the BIOS utlty and clear the record.

1.CINTRU

2.Ground

En-15

Englsh

Seral ATA Connector: SATA1~6Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect to one Seral ATA devce.

Floppy DMSIFloppy DMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkdf

dfasdddffasdfdd

dddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf f sdfadf ff asdf f f

df

Floppy DMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkd

fdfasdddf fasdfddd

ddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf fsdfadff f asdf ff d

f

SATA1_2

SATA3~6

SATA1~6 supported by Intel H55

ImportantPlease do not fold the Seral ATA cable nto 90-degree angle. Otherwse, data loss may occur durng transmsson.

Seral Port Connector: JCOM1/ JCOM2Ths connector s a 16550A hgh speed communcaton port that sends/receves 16 bytes FIFOs. You can attach a seral devce.

1.DCD

3.SOUT

10.No Pin

5.Ground

7.RTS

9.RI

8.CTS6.DSR4.DTR2.SIN

En-16

MS-7636 Manboard

Fan Power Connectors: CPUFAN,SYSFAN1~2The fan power connectors support system coolng fan wth +12V. When connectng the wre to the connectors, always note that the red wre s the postve and should be con-nected to the +12V; the black wre s Ground and should be connected to GND. If the manboard has a System Hardware Montor chpset on-board, you must use a specally desgned fan wth speed sensor to take advantage of the CPU fan control.

1.Ground2.+12V

3.Sensor4.Control

1.Ground2.+12V

3.Sensor

CPUFAN SYSFAN1/ 2

ImportantPlease refer to the recommended CPU fans at processors offical webste or consult the vendors for proper CPU coolng fan.CPUFAN support Smart fan control. You can nstall Control Center utlty that wll automatcally control the CPUFAN speeds accordng to the actual CPUFAN tem-peratures.Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN.

Front Panel Connectors: JFP1, JFP2These connectors are for electrcal connecton to the front panel swtches and LEDs. The JFP1 s complant wth Intel Front Panel I/O Connectvty Desgn Gude.

1.Ground

3.Suspend LED

5.Power LED

7.No Pin

8.+6.-4.+2.-

BuzzerSpe

aker

1.+3.-

10.No Pin

5.-Reset Switch

HDD LED

Power SwitchPower LED

7.+9.Reserved

8.-6.+4.-2.+

JFP1 JFP2

En-17

Englsh

Front USB Connector: JUSB1 / JUSB2 / JUSB3Ths connector, complant wth Intel I/O Connectvty Desgn Gude, s deal for con-nectng hgh-speed USB nterface perpherals such as USB HDD, dgtal cameras, MP3 players, prnters, modems and the lke.

USB 2.0 Bracket (optonal)

1.VCC

3.USBD-

10.USBOC

5.USBD+

7.Ground

9.No Pin

8.Ground6.USBD+

4.USBD-2.VCC

ImportantNote that the pns of VCC and GND must be connected correctly to avod possble damage.

CD-In Connector: JCD1Ths connector s provded for external audo nput.

4.R3.Ground

2.Ground

1.L

En-18

MS-7636 Manboard

S/PDIF-Out Connector: JSP1Ths connector s used to connect S/PDIF (Sony & Phlps Dgtal Interconnect Format) nterface for dgtal audo transmsson.

1.VCC

2.SPDIF

3.Ground

S/PDIF Bracket (Optonal)

Parallel Port Header: JLPT1Ths connector s used to connect an optonal parallel port bracket. The parallel port s a standard prnter port that supports Enhanced Parallel Port (EPP) and Extended Capabltes Parallel Port (ECP) mode.

10.Ground

14.Ground8.LPT_SLIN#

12.Ground6.PINIT#4.ERR#

2.AFD#

24.Ground

22.Ground

26.No Pin20.Ground

18.Ground16.Ground

1.RSTB#

3.PRND0

5.PRND1

7.PRND2

9.PRND3

11.PRND4

13.PRND5

15.PRND6

17.PRND7

19.ACK#

21.BUSY

23.PE

25.SLCT

En-19

Englsh

Front Panel Audo Connector: JAUD1Ths connector allows you to connect the front panel audo and s complant wth Intel Front Panel I/O Connectvty Desgn Gude.

1.MIC L

3.MIC R

10.Head Phone Detection

5.Head Phone R

7.SENSE_SEND

9.Head Phone L

8.No Pin6.MIC Detection

4.PRESENCE#

2.Ground

TPM Module connector: JTPM1Ths connector connects to a TPM (Trusted Platform Module) module (optonal). Please refer to the TPM securty platform manual for more detals and usages.

10.No Pin

14.Ground8.5V Power

12.Ground6.Serial IRQ

4.3.3V Power

2.3V Standby power

1.LPC Clock

3.LPC Reset

5.LPC address & data pin0

7.LPC address & data pin1

9.LPC address & data pin2

11.LPC address & data pin3

13.LPC Frame

En-20

MS-7636 Manboard

JuMperS

Clear CMOS Jumper: JBAT1There s a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuraton. Wth the CMOS RAM, the system can automatcally boot OS every tme t s turned on. If you want to clear the system configuraton, set the jumper to clear data.

ImportantYou can clear CMOS by shortng 2-3 pn whle the system s off. Then return to 1-2 pn poston. Avod clearng the CMOS whle the system s on; t wll damage the manboard.

JBAT1 Keep Data Clear Data

1 11

En-21

Englsh

SwitchOverclock Swtch: OC_SW1(optonal)You can overclock the processor frequency by changng the swtch. Follow the nstructons below to set the CPU clock.

Default Increase 10% speed of CPU clock

Increase 15% speed of CPU clock

Increase 20% speed of CPU clock

ImportantMake sure that you power off the system before settng the swtch.When overclockng cause system nstablty or crash durng boot, please set the swtch to default settng.

En-22

MS-7636 Manboard

SlotSPCIE (Perpheral Component Interconnect Express) SlotThe PCI Express slot supports the PCI Express nterface expanson card.

PCI Express x16 Slot

PCI Express x1 Slot

PCI (Perpheral Component Interconnect) SlotThe PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply wth PCI specficatons.

32-bt PCI Slot

PCI Interrupt Request RoutngThe IRQ, acronym of nterrupt request lne and pronounced I-R-Q, are hardware lnes over whch devces can send nterrupt sgnals to the mcroprocessor. The PCI IRQ pns are typcally connected to the PCI bus pns as follows:

Order1 Order2 Order3 Order4PCI Slot1 INT E# INT F# INT G# INT H#

ImportantWhen addng or removng expanson cards, make sure that you unplug the power sup-ply first. Meanwhle, read the documentaton for the expanson card to configure any necessary hardware or software settngs for the expanson card, such as jumpers, swtches or BIOS configuraton.

En-23

Englsh

led StatuS indicatorS

APS LEDThe APS (Actve Phase Swtchng) LED ndcate the current CPU power phase mode. Follow the nstructons below to read.

: ON, : OFF

The LED wll lght when CPU s n 2 or 3 phase power mode. The LED wll turn off when CPU s n 1 phase power mode.

APS LED

En-24

MS-7636 Manboard

bioS SetupThs chapter provdes basc nformaton on the BIOS Setup program and allows you to configure the system for optmum use. You may need to run the Setup program when:

An error message appears on the screen durng the system bootng up, and requests you to run BIOS SETUP.You want to change the default settngs for customzed features.

ImportantThe tems under each BIOS category descrbed n ths chapter are under contnuous update for better system performance. Therefore, the descrpton may be slghtly dfferent from the latest BIOS and should be held for reference only.Upon boot-up, the 1st lne appearng after the memory count s the BIOS verson. It s usually n the format:

A7636IMS V1.0 102009 where: 1st dgt refers to BIOS maker as A = AMI, W = AWARD, and P = PHOENIX. 2nd - 5th dgt refers to the model number. 6th dgt refers to the chpset as I = Intel, N = NVIDIA, A = AMD and V = VIA. 7th - 8th dgt refers to the customer as MS = all standard customers. V1.0 refers to the BIOS verson. 102009 refers to the date ths BIOS was released.

En-25

Englsh

Enterng SetupPower on the computer and the system wll start POST (Power On Self Test) process. When the message below appears on the screen, press key to enter Setup.

Press DEL to enter SETUP

If the message dsappears before you respond and you stll wsh to enter Setup, restart the system by turnng t OFF and On or pressng the RESET button. You may also restart the system by smultaneously pressng , , and keys.

Gettng HelpAfter enterng the Setup menu, the first menu you wll see s the Man Menu.

Man MenuThe man menu lsts the setup functons you can make changes to. You can use the arrow keys ( ) to select the tem. The on-lne descrpton of the hghlghted setup functon s dsplayed at the bottom of the screen.

Sub-MenuIf you find a rght ponter symbol appears to the left of certan fields that means a sub-menu can be launched from ths field. A sub-menu contans addtonal optons for a field parameter. You can use arrow keys ( ) to hghlght the field and press to call up the sub-menu. Then you can use the control keys to enter values and move from field to field wthn a sub-menu. If you want to return to the man menu, just press the .

General Help The BIOS setup program provdes a General Help screen. You can call up ths screen from any menu by smply pressng . The Help screen lsts the approprate keys to use and the possble selectons for the hghlghted tem. Press to ext the Help screen.

En-26

MS-7636 Manboard

The Man Menu Once you enter BIOS CMOS Setup Utlty, the Man Menu wll appear on the screen. The Man Menu allows you to select from the setup functons and two ext choces. Use arrow keys to select among the tems and press to accept or enter the sub-menu.

Standard CMOS FeaturesUse ths menu for basc system configuratons, such as tme, date etc.

Advanced BIOS FeaturesUse ths menu to setup the tems of specal enhanced features.

Integrated PerpheralsUse ths menu to specfy your settngs for ntegrated perpherals.

Power Management SetupUse ths menu to specfy your settngs for power management.

H/W MontorThs entry shows your PC health status.

Green PowerUse ths menu to specfy the power phase.

BIOS Settng PasswordUse ths menu to set the password for BIOS.

Cell MenuUse ths menu to specfy your settngs for frequency/voltage control and overclockng.

En-27

Englsh

M-FlashUse ths menu to read/ flash the BIOS from storage drve (FAT/ FAT32 format only).

Overclockng ProfileUse ths menu to save/ load your settngs to/ from CMOS for BIOS.

Load Fal-Safe DefaultsUse ths menu to load the default values set by the BIOS vendor for stable system performance.

Load Optmzed DefaultsUse ths menu to load the default values set by the manboard manufacturer specfically for optmal performance of the manboard.

Save & Ext SetupSave changes to CMOS and ext setup.

Ext Wthout SavngAbandon all changes and ext setup.

En-28

MS-7636 Manboard

When enterng the BIOS Setup utlty, follow the processes below for general use.Load Optmzed Defaults : Use control keys ( ) to hghlght the Load Optmzed Defaults field and press , a message as below appears:

1.

Select [Ok] and press Enter to load the default settngs for optmal system performance.

Setup Date/ Tme : Select the Standard CMOS Features and press to enter the Standard CMOS Features-menu. Adjust the Date, Tme fields.

2.

Save & Ext Setup : Use control keys ( ) to hghlght the Save & Ext Setup field and press , a message as below appears:

3.

Select [Ok] and press Enter to save the configuratons and ext BIOS Setup utlty.

ImportantThe configuraton above are for general use only. If you need the detaled settngs of BIOS, please see the complete verson of Englsh manual on MSI webste.

En-29

Englsh

Cell Menu Introducton : Ths menu s for advanced user who want to overclock the manboard.

4.

ImportantChange these settngs only f you are famlar wth the chpset.

Current CPU / DRAM / QPI Frequency These tems show the current frequences of CPU, Memory and QPI. Read-only.

CPU SpecficatonsPress to enter the sub-menu. Ths submenu shows the nformaton of nstalled CPU.

CPU Technology SupportPress to enter the sub-menu. In ths sub-menu, t shows the nstalled CPU technologes. Read only.

CPU FeaturePress to enter the sub-menu:

En-30

MS-7636 Manboard

Intel EISTThe Enhanced Intel SpeedStep technology allows you to set the performance level of the mcroprocessor whether the computer s runnng on battery or AC power. Ths field wll appear after you nstalled the CPU whch supports speedstep technology.

Intel C-STATEC-state s a power management state that sgnficantly reduces the power of the processor durng dle. Ths field wll appear after you nstalled the CPU whch supports c-state technology.

C State Package Lmt SettngThs feld allows you to select a C-state level. We recommand that you leave ths settng to Auto.

C1E SupportTo enable ths tem to read the CPU power consumpton whle dle. Not all processors support Enhanced Halt state (C1E).

OverSpeed ProtectonOverspeed Protecton functon can montor the current CPU draws as well as ts power consumpton. If t exceeds a certan level, the processor automatcally reduces ts clock speed. If you want to overclock your CPU, set t to [Dsabled].

Hyper-Threadng Functon The processor uses Hyper-Threadng technology to ncrease transacton rates and reduces end-user response tmes. The technology treats the two cores nsde the processor as two logcal processors that can execute nstructons smultaneously. In ths way, the system performance s hghly mproved. If you dsable the functon, the processor wll use only one core to execute the nstructons. Please dsable ths tem f your operatng system doesnt support HT Functon, or unrelablty and nstablty may occur.

ImportantEnablng the functonalty of Hyper-Threadng Technology for your computer system requres ALL of the followng platform Components:

CPU: An Intel Processor wth HT Technology;Chpset: An Intel Chpset that supports HT Technology;BIOS: A BIOS that supports HT Technology and has t enabled; OS: An operatng system that supports HT Technology.

For more nformaton on Hyper-threadng Technology, go to:http://www.ntel.com/products/ht/hyperthreadng_more.htm

Execute Bt SupportIntels Execute Dsable Bt functonalty can prevent certan classes of malcous buffer overflow attacks when combned wth a supportng operatng system. Ths functonalty allows the processor to classfy areas n memory by where applcaton code can execute and where t cannot. When a malcous worm attempts to nsert code n the buffer, the processor dsables code executon, preventng damage or worm propagaton.

En-31

Englsh

Set Lmt CPUID MaxVal to 3The Max CPUID Value Lmt s desgned lmt the lsted speed of the processor to older operatng systems.

Intel Vrtualzaton TechThs tem s used to enable/dsable the Intel Vrtualzaton technology. For further nformaton please refer to Intels offical webste.

Intel VT-d TechThs tem s used to enable/dsable the Intel Vrtualzaton Technology for Drected I/O (VT-d). For further nformaton please refer to Intels offical webste.

Intel EISTThe Enhanced Intel SpeedStep technology allows you to set the performance level of the mcroprocessor whether the computer s runnng on battery or AC power. Ths field wll appear after you nstalled the CPU whch supports speedstep technology.

C1E SupportTo enable ths tem to read the CPU power consumpton whle dle. Not all processors support Enhanced Halt state (C1E).

Adjust CPU Base Frequency (MHz)Ths tem allows you to set the CPU Base clock (n MHz). You may overclock the CPU by adjustng ths value. Please note the overclockng behavor s not guaranteed.

OC SteppngThs tem wll be enabled after you set the overclockng frequency n the Adjust CPU Base Frequency (MHz). And the followng tems wll appear. Ths tems wll help the system to overclock step by step after system bootng up.

Start OC Steppng From (MHz)Ths tem s used to set the ntal base clock. The system wll boot wth the ntal base clock, and start to overclock from ntal base clock to set base clock that you set n Adjust CPU Base Frequency (MHz) step by step.

OC StepThs tem s used to set how many steps for base colck overclockng.

OC Step Count TmerThs tem s used to set the buffer tme for every step.

Adjust CPU RatoThs tem allows you to adjust the CPU rato. Settng to [Startup] enables the CPU runnng at the fastest speed whch s detected by system.

Adjusted CPU Frequency (MHz)It shows the adjusted CPU frequency (Base clock x Rato). Read-only.

Auto OverClock TechnologyThs tem s used to enable/ dsable the Auto OverClock functon.

Memory-ZPress to enter the sub-menu.

En-32

MS-7636 Manboard

DIMM1~4 Memory SPD InformatonPress to enter the sub-menu. The sub-menu dsplays the nformatons of nstalled memory.

Current DRAM Channel1~4 TmngIt shows the nstalled DRAM Tmng. Read-only.

DRAM Tmng ModeSelect whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EEPROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng Advance DRAM Configuraton sub-menu to be determned by BIOS based on the configuratons on the SPD. Selectng [Manual] allows users to configure the DRAM tmngs and the followng related Advance DRAM Configuraton sub-menu manually.

Advance DRAM ConfiguratonPress to enter the sub-menu.

CH1/ CH2 1T/2T Memory TmngThs tem controls the SDRAM command rate. Select [1N] makes SDRAM sgnal controller to run at 1N (N=clock cycles) rate. Selectng [2N] makes SDRAM sgnal controller run at 2N rate.

CH1/ CH2 CAS Latency (CL)Ths controls the CAS latency, whch determnes the tmng delay (n clock cycles) before SDRAM starts a read command after recevng t.

CH1/ CH2 tRCDWhen DRAM s refreshed, both rows and columns are addressed separately. Ths setup tem allows you to determne the tmng of the transton from RAS (row address strobe) to CAS (column address strobe). The less the clock cycles, the faster the DRAM performance.

CH1/ CH2 tRPThs settng controls the number of cycles for Row Address Strobe (RAS) to be allowed to precharge. If nsufficent tme s allowed for the RAS to accumulate ts charge before DRAM refresh, refresh may be ncomplete and DRAM may fal to retan data. Ths tem apples only when synchronous DRAM s nstalled n the system.

CH1/ CH2 tRASThs settng determnes the tme RAS takes to read from and wrte to memory cell.

CH1/ CH2 tRFCThs settng determnes the tme RFC takes to read from and wrte to a memory cell.

CH1/ CH2 tWRMnmum tme nterval between end of wrte data burst and the start of a precharge command. Allows sense amplfiers to restore data to cells.

CH1/ CH2 tWTRMnmum tme nterval between the end of wrte data burst and the start of a column-read command. It allows I/O gatng to overdrve sense amplfiers before read

En-33

Englsh

command starts.CH1/ CH2 tRRD

Specfies the actve-to-actve delay of dfferent banks. CH1/ CH2 tRTP

Tme nterval between a read and a precharge command.CH1/ CH2 tFAW

Ths tem s used to set the tFAW tmng.Current CH1/ CH2 tdrRdTRd/ tddRdTRd/ tsrRdTWr/ tdrRdTWr/ tddRdTWr/ tsrWrTRd/ tddWrTWr/ tsrRDTRd/ tsrWrTWr

These tem show the advanced DRAM tmngs.Channel 1/ Channel2 Advanced Memory Settng

Settng to [Auto] enables the advance memory tmng automatcally to be determned by BIOS. Settng to [Manual] allows you to set the followng advanced memory tmngs.

Memory RatoThs tem allows you to set the memory multpler.

Adjusted DRAM Frequency (MHz)It shows the adjusted DRAM frequency. Read-only.

QPI RatoThs tem allows you to set the QPI multpler.

Adjusted QPI Frequency (MHz)It shows the adjusted QPI frequency. Read-only.

ClockGen TunerPress to enter the sub-menu.

CPU Ampltude Control/ PCI Express Ampltude ControlThese tems are used to select the CPU/ PCI Express clock ampltude.

Adjust PCI-E Frequency (MHz)Ths field allows you to select the PCIE frequency (n MHz).

Auto Dsable DRAM/PCI FrequencyWhen set to [Enabled], the system wll remove (turn off) clocks from empty DIMM and PCI slots to mnmze the electromagnetc nterference (EMI).

CPU Voltage (V)/ DRAM Voltage (V)/ PCH 1.05(V)These tems are used to adjust the voltage of CPU, Memory and chpset.

Spread SpectrumWhen the manboards clock generator pulses, the extreme values (spkes) of the pulses create EMI (Electromagnetc Interference). The Spread Spectrum functon reduces the EMI generated by modulatng the pulses so that the spkes of the pulses are reduced to flatter curves.

En-34

MS-7636 Manboard

ImportantIf you do not have any EMI problem, leave the settng at [Dsabled] for optmal system stablty and performance. But f you are plagued by EMI, select the value of Spread Spectrum for EMI reducton. The greater the Spread Spectrum value s, the greater the EMI s reduced, and the system wll become less stable. For the most sutable Spread Spectrum value, please consult your local EMI regulaton.Remember to dsable Spread Spectrum f you are overclockng because even a slght jtter can ntroduce a temporary boost n clock speed whch may just cause your overclocked processor to lock up.

En-35

Englsh

ImportantFaled Overclockng Resoluton Ths manboard supports overclockng greatly. However, please make sure your perpherals and components are bearable for some specal settngs. Any operaton that exceeds product specficaton s not recommended. Any rsk or damge resultng from mproper operaton wll not be under our product warranty.Two ways to save your system from faled overclockng...

RebootPress the Power button to reboot the system three tmes. Please note that, to avod electrc current to affect other devces or components, we suggest an nterval of more than 10 seconds among the reboot actons.

At the fourth reboot, BIOS wll determne that the prevous overclockng s faled and restore the default settngs automatcally. Please press any key to boot the system normally when the followng message appears on screen.

Warnng !!! The prevous overclockng had faled, and system wll restore ts defaults settng, Press any key to contnue.......

Clear CMOSPlease refer to "how to clear CMOS data" secton for more nformaton about how to clear CMOS data.

En-36

MS-7636 Manboard

Software inforMationTake out the Drver/Utlty DVD that s ncluded n the manboard package, and place t nto the DVD-ROM drve. The nstallaton wll auto-run, smply clck the drver or utlty and follow the pop-up screen to complete the nstallaton. The Drver/Utlty DVD contans the:

Drver menu : The Drver menu shows the avalable drvers. Install the drver by your desre and to actvate the devce.Utlty menu : The Utlty menu shows the software applcatons that the manboard supports.WebSte menu : The WebSte menu shows the necessary webstes.

ImportantPlease vst the MSI webste to get the latest drvers and BIOS for better system performance.

-

-

-

H55M-E33 /H55M-P31 Sere

Deutsch

Europe verson

De-2

MS-7636 Manboard

Spezificationen

ProzessorenIntel Core 7, Core 5 (Lynnfield & Clarkdale), Core 3 und Pentum Prozesso-ren fr Sockel LGA1156 (Wetere CPU Informatonen finden Se unter http://www.ms.com/ndex.php?func=cpuform2)

HyperTransport133 MHz

ChpsatzIntel H55 Chpsatz

Specher4 DDR3 DIMMs untersttzt DDR3 2133*(OC)/ 2000*(OC) /1600*(OC)/ 1333/ 1066 DRAM (max.16GB)Untersttzt de Dual-Channel Modus*(Wetere Informatonen zu kompatblen Spechermodulen finden Se unter http://www.ms.com/ndex.php?func=testreport)

LANUntersttzt LAN 10/100/1000 ber Realtek RTL8111DL

AudoOnboard Soundchp Realtek ALC889 (True Blu-ray Audo)8-Kanal Audo-Ausgang mt Jack SensngErfllt de Azala Spezfikatonen

IDE (optonal)1 IDE Port ber JMcron JMB368Untersttzt de Betrebmod Ultra DMA 100/133Untersttzt de Betrebmod PIO, Bus Masterng

SATA6 SATA 3Gb/s (SATA1~6) Ports ber Intel H55

AnschlsseHntere En-/ und Ausgnge

1 PS/2 Mausanschluss 1 PS/2 Tastaturanschlus6 USB 2.0 Anschlsse1 HDMI Anschluss* (optonal)1 VGA Anschluss*1 DVI Anschluss* (optonal)1 LAN Anschluss6 Audobuchsen (fr H55M-E33)3 Audobuchsen (fr H55M-P31)

*(HDMI, VGA und DVI Ports nur mt ertem Grafikprozessor arbeten.)On-Board

3 USB 2.0 Stftlesten 1 Gehusekontaktschalter

---------

--

De-3

Deutsch

1 CD Stftleste fr Audo Engang1 S/PDIF-Ausgang Stftleste1 Audo Stftleste fr Gehuse Audo En-/ Ausgnge1 TPM Stftleste1 Parallele Stftleste 2 Serelle Stftlesten

Steckpltze1 PCI Express 2.0 x16-Steckplatz2 PCI Express 2.0 x1-Steckpltz1 PCI-Steckplatz, untersttzt 3.3V/ 5V PCI Bus Interface

Form FaktorATX (24.4cm X 24.0 cm)

Montage 6 Montagebohrungen

Wenn Se fr Bestellungen von Zubehr Telenummern bentgen, finden Se dese auf unserer Produktsete unter http://www.ms.com/ndex.php

------

De-4

MS-7636 Manboard

koMponenten-berSicht

Rcktafel, De-12

CPU, De-5

CPUFAN, De-16

DDR3, De-9

JLPT1, De-18

JPWR2, De-11

JPWR1, De-11

IDE1, De-14

SYSFAN2, De-16

SATA1~6, De-15

JFP1, JFP2, De-16

JUSB1~3, De-17

JCOM1,JCOM2 De-15

JSP1, De-18

JCD1, De-17

JAUD1, De-19

PCI, De-22

JCI1, De-14

JTPM1, De-19

PCIE, De-22

SYSFAN1, De-16

JBAT1, De-20

OC_SW1, De-21

De-5

Deutsch

cpu (prozeSSor)Wenn Se de CPU enbauen, stellen Se btte scher, dass Se auf der CPU enen Khler anbrngen, um berhtzung zu vermeden. Verfgen Se ber kenen Khler, setzen Se sch btte mt Ihrem Hndler n Verbndung, um enen solchen zu erwerben und zu nstalleren. Um de neuesten Informatonen zu untersttzten Prozessoren zu erhalten, besuchen Se btte http://www.ms.com/ndex.php?func=cpuform2

Wchtgberhtzungberhtzung beschdgt de CPU und das System nachhaltg. Stellen Se stets ene korrekte Funktonswese des CPU Khlers scher, um de CPU vor berhtzung zu schtzen. berprfen Se ene glechmge Schcht der thermschen Paste (oder ther-mschen Klebeandes) zwschen der CPU und dem Khlblech anwenden, um Wrme-abletung zu erhhen.CPU WechselStellen Se vor enem Wechsel des Prozessors stets scher, dass das ATX Netztel ausgeschaltet und der Netzstecker gezogen st, um de Unversehrthet der CPU zu gewhrlesten.bertaktenDeses Motherboard wurde so entworfen, dass es bertakten untersttzt. Stellen Se jedoch btte scher, dass de betroffenen Komponenten mt den abwechenden Enstel-lungen whrend des bertaktens zurecht kommen. Von jedem Versuch des Betrebes auerhalb der Produktspezfikatonen kann nur abgeraten werden. Wr bernehmen kenerle Garante fr de Schden und Rsken, de aus unzulssgem oder Bet reb jense ts der Produktspezfikatonen resulteren.

Erklrung zur LGA 1156 CPUDe Pn-Sete der LGA 1156 CPU. De Obsersete der LGA 1156 CPU. Ver-

gessen Se ncht, etwas Slzumwrmel-etpaste auf de CPU auf zut ragen,um ene Abletung der Htze zu erzelen.

Justerung

Das gelbe Dreeck des Prozessorsdefinert de Poston des ersten Pns

Justerung

Das gelbe Dreeck des Prozessorsdefinert de Poston des ersten Pns

De-6

MS-7636 Manboard

CPU & Khler EnbauWenn Se de CPU enbauen, stellen Se btte scher, dass Se auf der CPU enen Khler anbrngen, um berhtzung zu vermeden. Vergessen Se ncht, etwas Slzumwrmel-etpaste auf de CPU aufzutragen, bevor Se den Prozessorkhler nstalleren, um ene Abletung der Htze zu erzelen. Folgen Se den Schrtten unten, um de CPU und den Khler ordnungsgem zu nstal-leren. En fehlerhafter Enbau fhrt zu Schden an der CPU und dem Manboard.

ffnen Se den Sockelverschlussheb-el.

1. Klappen Se den Hebel ganz auf und ffnen Se de Metallver-schlussklappe.

2.

Der CPU-Sockel bestzt zum Schutz ene Plastkabdeckung. Lassen Se vor der Installaton dese Schutz-kappe auf dem Sockel um Schden zu vermeden.

3. Vergewssern Se sch anhand der Justermarkerungen und dem gel-ben Dreeck, da de CPU n der korrekten Poston st. Setzen Se an-schleend de CPU n den Sockel.

4.

Justermarkerungen

De-7

Deutsch

Begutachten Se, ob de CPU rchtg m Sockel stzt. Falls ncht, zehen Se de CPU durch ene ren vertkale Be-wegung weder heraus. Versuchen Se es erneut.

5. Schleen Se de Abdeckung des Sockels und drcken Se den Ver-schlusshebel mt lechtem Druck nach unten.

6.

Arreteren Se den Hebel unter dem Rckhaltehaken des CPU-Sockels.

7. Kontrolleren Se de ver Haken snd n rchtger Poston, bevor Se de Khlvorrchtung anbrngen.

8.

WchtgStellen Se scher, dass Ihr CPU Kher fest engebaut st, bevor Se Ihr System an-schalten.Berhren Se de Pns des CPU Sockels ncht, um Schaden zu vermeden.

Justermarkerungen

De-8

MS-7636 Manboard

WchtgPrfen Se de Status der CPU m BIOS.Wenn kene CPU nstallert st, schtzen Se mmer den CPU-Sockel durch de Plastkabdeckung (Fgur 1).De Manboard Fotos, de n desem Abschntt gezegt werden, snd fr Demonstra-ton der CPU/ Khler Installaton. Das Aussehen Ihres Manboard kann abhngg von dem Modell schwanken, das Se kaufen.Bezehen Se btte sch de auf Unterlagen m CPU Khlerpaket fr mehr Detals ber de CPU Khlernstallaton.

Manboard

Haken

Drcken Se den Verschlusshebel mt lechtem Druck nach unten und arreteren Se den Hebel unter dem Rckhaltehaken des CPU-Sockels.

9. Fhren Se den CPU-Khler ber den CPU-Sockel.

10.

Drehen Se das Manboard um und vergewssern Se sch, dass das der Khler korrekt nstallert st.

11. Schlelch verbnden Se das Stromkabel des CPU Lfters mt dem Anschluss auf dem Manboard.

12.

De-9

Deutsch

SpeicherDese DIMM-Steckpltze nehmen Arbetsspechermodule auf. De neusten Infor-matonen ber kompatble Bautele finden Se unter http://www.ms.com/ndex.php?func=testreport

DDR3240-polg, 1.5V

48x2=96 Pole 72x2=144 Pole

Hnwese fr den Ensatz von SpechermodulenBtte beachten Se de folgenden Abbldungen zum Specherenbau.Populatonsregeln fr Dual-Channel-SpecherIm Dual -Channel-Modus knnen Arbetsspechermodule Daten ber zwe Datenbusle-tungen glechzetg senden und empfangen. Durch Aktverung des Dual-Channel-Mo-dus wrd de Lestung Ihres Systems verbessert. Btte beachten Se de folgenden Ab-bldungen zur Veranschaulchung der Populatonsregeln m Dual-Channel-Modus.

1

DIMM2

DIMM1

DIMM4

DIMM3

2

DIMM2

DIMM1

DIMM4

DIMM3

WchtgDDR3 und DDR2 knnen ncht unterenander getauscht werden und der Standard DDR3 st ncht abwrtskompatbel. Installeren Se DDR3 Spechermodule stets n DDR3 DIMM Slots.Stellen Se m Zwekanalbetreb btte scher, dass Se Module des glechen Typs und dentscher Specherdchte n den DIMM Slots unterschedlcher Kanle verwenden.Um enen scheren Systemstart (besonders fr Lynnfield CPU) zu gewhrlesten, bestcken Se mmer DIMM1 zuerst.Aufgrund der Chpsatzressourcennutzung wrd nur ene Systemdchte bs 15+GB (ncht volle 16GB) erkannt, wenn jeder DIMM Slot mt enem 4GB Spechermodul besetzt wrd.

InstalledEmpty

nstallertleer

De-10

MS-7636 Manboard

Vorgehenswese bem Enbau von Specher ModulenDe Spechermodulen haben nur ene Kerbe n der Mtte des Moduls. Se passen nur n ener Rchtung n den Sockel.Stecken Se das Arbetsspechermodul senkrecht n den DIMM-Steckplatz en. Drcken Se anschlend das Arbetsspechermodul nach unten, bs de Kontakt-sete rchtg tef n dem DIMM-Steckplatz stzt. Der Kunststoffbgel an jedem Ende des DIMM-Steckplatzes schnappt automatsch en, wenn das Arbetsspechermodul rchtg engesetzt st.Prfen Se von Hand, ob das Arbetsspechermodul von den setlchen Bgeln am DIMM-Steckplatz rchtg gehalten wrd.

Notch

Kerbe

WchtgDe goldenen Kontakte snd kaum zu sehen, wenn das Arbetsspechermodul rchtg m DIMM-Steckplatz stzt.

1.

2.

3.

De-11

Deutsch

StroMverSorGunGATX 24-polger Stromanschluss: JPWR1Mt desem Anschluss verbnden Se den ATX 24-polgen Anschluss des Netztels. Achten Se be dem Verbnden des ATX 24-polgen Stromanschlusses darauf, dass der Anschluss des Netztels rchtg auf den Anschluss an der Hauptplatne ausgerchtet st. Drcken Se dann den Anschluss des Netztels fest nach unten, um ene rchtge Verbndung zu gewhrlesten.Se knnen auch den 20-polgen ATX-Stromanschluss des Netztels verwenden. In de-sem Fall muss ene Ecke des 20-polgen ATX-Stromanschlusses des Netztels auf den Pol 1 bzw. Pol 13 des Anschlusses an der Hauptplatne ausgerchtet werden.

13.+3.3V

1.+3.3V

14.-12V

2.+3.3V

15.Ground

3.Ground

16.PS-ON#

4.+5V

17.Ground

5.Ground

18.Ground

6.+5V

19.Ground

7.Ground

22.+5V

10.+12V

20.Res

8.PWR OK

23.+5V

11.+12V

21.+5V

9.5VSB

24.Ground

12.+3.3V

ATX 4-polger Stromanschluss: JPWR2Deser Stromanschluss wrd verwendet, um de CPU mt Strom zu versorgen.

4.+12V

2.Ground

3.+12V

1.Ground

WchtgStellen Se scher, dass dese Anschlsse mt den rchtgen Anschlssen des Netz-tels verbunden werden, um enen stablen Betreb der Hauptplatne scherzustellen.Fr de Systemstabltt st en Netztel mt 400 Watt (oder noch mehr) empfe-hlenswert.De ATX 12V Stromversorgung sollte mt mehr als 18A erfolgen.

De-12

MS-7636 Manboard

rcktafel

Maus/TastaturDe Standard PS/2 Maus/Tastatur Stecker Mn DIN st fr ene PS/2 Maus/Tastatur.

USB PortDeser USB (Unversal Seral Bus) Anschluss zum drekten Anschluss von USB- Gerten, we etwa Tastatur, Maus oder weterer USB-kompatbler Gerte.

LAN De Standard RJ-45 Buchse st fr Anschlus zum an en Lokales Netzwerk (Local Area Network - LAN). Her kann en Netzwerkkabel angeschlossen werden.

LED Farbe LED Status Zustand

Lnks Gelb Aus Kene Verbndung mt dem LAN.

An (Dauerleuchten) Verbndung mt dem LAN.

An (heller & pulserend) Der Computer kommunzert mt enem anderen Rechner m LAN.

Rechts Grn Aus Gewhlte Datenrate 10 MBt/s.

An Gewhlte Datenrate 100 MBt/s.

Orange An Gewhlte Datenrate 1000 MBt/s.

Maus/Tastatur

USB Port

LAN

Lne-In

Lne-Out

Mc

RS-Out

CS-Out

SS-Out

HDMI Port

USB Port

Gelb Grn/ Orange

USB Port

VGA Port

DVI Port

Maus/Tastatur

USB Port

LAN

Lne-In

Lne-Out

Mc

USB Port

USB Port

VGA Port

H55M-E33 Rcktafel

H55M-P31 Rcktafel

De-13

Deutsch

VGA AnschlussDe DB 15-Pn Buchse dent zum Anschluss enes VGA Montors.

HDMI Anschluss (optonal)Das Hgh-Definton Multmeda Interface (kurz HDMI) st ene Schnttstelle fr de volldgtale bertragung von dekomprmerten Audo- und Vdeo-Daten. Deser HDMI untersttzt alle Formate fr Fernseh, enschlelch Standard- und Enhanced- oder HD-Vdeo sowe das Audoformate der Unterhaltungselektronk

DVI Anschluss (optonal)Der DVI-D (Dgtal Vsual Interface-Dgtal) Anschluss erlaubt Ihnen, enen LCD Montor anzuschlen. Es stellt ene dgtale Hochgeschwndgketsverbndung zwschem dem Computer und dem Bldschrm her. Um enen LCD Montor anzuschlen, verbnden Se dessen Stecker enfach mt dem DVI-D Anschluss des Manboards und stellen Se scher, dass das andere Ende des Kabels ordnungsgem mt dem Montor verbunden st.(Wetere Informatonen knnen Se dem Handbuch Ihres Montors entnehmen.)

WchtgDe VGA, HDMI und DVI Schnttstellen auf dem Manboard snd dazu entworfen, um als IGP (Integrated Graphcs Processor - egrertem Grafikprozessor) zu denen. Wenn Se enen Prozessor ohne ntegrerten Grafikchp nstallert haben, haben dese DsplayPorts kene funkton.

AudoanschlsseDese Audoanschlsse denen zur Verbndung mt Audogerten. Durch de Farben erkennen Se de unterschedlchen Funktonen der Audoanschlsse.

Lne-In (Blau) - Der Anschluss Lne In kann enen externen CD-Player,Tapeplayer oder en sonstges Audogert aufnehmen. Lne-Out (Grn) - An den Anschluss Lne Out knnen Se Lautsprecher oder Kopfhrer anschleen.Mkrofon (Rosa) - Der Anschluss Mc nmmt en Mkrofon auf. RS-Out (Schwarz) - Deser Anschluss nmmt de hnteren Surround-Lautspre-cher m 4/ 5.1/ 7.1-Kanalmodus auf. CS-Out (Orange) - Deser Anschluss nmmt de mttleren oder Subwoofer- Laut-sprecher m 5.1/ 7.1-Kanalmodus auf.SS-Out (Grau) - Deser Anschluss nmmt de setlchen Surround-Lautsprecher m 7.1-Kanalmodus auf.

WchtgUm der 8-Kanal Klangwrkung, zu errechen, mssen de 7. und 8. -Kanle von dem Frontpanel ausgegeben werden, wenn Se das Manboard mt 3 Audobuchsen kaufen.

De-14

MS-7636 Manboard

anSchlSSen

IDE Anschluss: IDE1 (optonal)An desem Anschluss knnen IDE Festplatten, optsche Laufwerke und andere Gerte betreben werden.

CD-ROMMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkd

fdfasdddffasdfddd

ddddfdasfdasa

sdfasd asd asdddddddf

asasdfsdf fsdfadff fasdff f

df

Floppy DMSIFloppy DMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkdf

dfasdddffasdfdd

dddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf fsdfadf ff asdf ff

df

Floppy DMSIK dkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkd

fdfasdddf fasdfddd

ddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf fsdfadff fasdf ff d

f

3 1/2" F lop

py Disk D r i

ve Connect

or

3 1/2" Fl op

py Disk Dr

i ve Connecto

r

WchtgVerbnden Se zwe Laufwerke ber en Kabel, mssen Se das zwete Laufwerk m Slave-Modus konfigureren, ndem Se entsprechend den Jumper setzen. Entnehmen Se btte de Anwesungen zum Setzen des Jumpers der Dokumentaton der IDE Gerte, de der Festplattenhersteller zur Verfgung stellt.

Gehusekontaktanschluss: JCI1Deser Anschluss wrd mt enem Kontaktschalter verbunden. Wrd das Gehuse geff-net, wrd der Schalter geschlossen und das System zechnet des auf und gbt auf dem Bldschrm ene Warnung aus. Um de Warnmeldung zu lschen, muss das BIOS auf-gerufen und de Aufzechnung gelscht werden.

1.CINTRU

2.Ground

De-15

Deutsch

Seral ATA Anschluss: SATA1~6Der Anschluss st ene Hochgeschwndgketsschnttstelle der Seral ATA. Pro An-schluss kann en S-ATA Gerte angeschlossen werden.

Floppy DMSIFloppy DMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkdf

dfasdddffasdfdd

dddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf f sdfadf ff asdf f f

df

Floppy DMSIKdkl kdkfk

kkfdkklddfkkksd d

fddfasdka df - d

dfddaddfdfdddd

dfadfadkjasjdkd

fdfasdddf fasdfddd

ddddfdasfdasas

dfasd asd asdddddddf

asasdfsdf fsdfadff f asdf ff d

f

SATA1_2

SATA3~6

SATA1~6 werden durch Intel H55 untersttzt

WchtgBtte falten Se das Seral ATA Kabel ncht n enem Wnkel von 90 Grad, da des zu Datenverlusten whrend der Datenbertragung fhrt.

Sereller Anschluss: JCOM1/ JCOM2Es handelt sch um ene 16550A Kommunkatonsschnttstelle, de 16 Bytes FIFOs senden/empfngt. Her lsst sch ene serelle Maus oder andere serelle Gerte drekt anschleen.

1.DCD

3.SOUT

10.No Pin

5.Ground

7.RTS

9.RI

8.CTS6.DSR4.DTR2.SIN

De-16

MS-7636 Manboard

Stromanschlsse fr Lfter: CPUFAN,SYSFAN1~2De Anschlsse untersttzen aktve Systemlfter mt + 12V. Wenn Se den Anschluss herstellen, sollten Se mmer darauf achten, dass der rote Draht der postve Pol st, und mt +12V verbunden werden sollte. Der schwarze Draht st der Erdkontakt und sollte mt GND verbunden werden. Ist Ihr Manboard mt enem Chpsatz zur berwachung der Systemhardware versehen, dann brauchen Se enen spezellen Lfter mt Tacho, um de Vortele der Steuerung des CPU Lfters zu nutzen.

1.Ground2.+12V

3.Sensor4.Control

1.Ground2.+12V

3.Sensor

CPUFAN SYSFAN1/ 2

WchtgBtte nformeren Se sch auf der offizellen Webste vom Prozessor ber empfohlene CPU Khler oder fragen Se Ihren Hndler nach enem geegneten Lfter.CPUFAN untersttzen de Lfterkontrolle. Se knnen das Utlty Overclockng Center nstalleren, welches automatsch de Geschwndgketen des CPUFAN n Abhngg-ket von der CPUFAN Temperaturen steuert.CPUFAN kann de Lfter/Khlkrper mt dre- und verpolgen Steckern unterstt-zen.

Frontpanel Anschlsse: JFP1, JFP2Dese Anschlsse snd fr das Frontpanel. Se denen zum Anschluss der Schalter und LEDs des Frontpanels. JFP1 erfllt de Anforderungen des Intel Front Panel I/O Con-nectvty Desgn Gude.

1.Ground

3.Suspend LED

5.Power LED

7.No Pin

8.+6.-4.+2.-

BuzzerSpe

aker

1.+3.-

10.No Pin

5.-Reset Switch

HDD LED

Power SwitchPower LED

7.+9.Reserved

8.-6.+4.-2.+

JFP1 JFP2

De-17

Deutsch

USB Vorderanschluss: JUSB1 / JUSB2 / JUSB3Deser Anschluss entsprcht den Rchtlnen des Intel I/O Connectvty Desgn Gude. Er st bestens geegnet, Hochgeschwndgkets- USB- Perpheregerte anzuschleen,we z.B. USB Festplattenlaufwerke, Dgtalkameras, MP3-Player, Drucker, Modems und hnlches.

USB 2.0 Slotblech (optonal)

1.VCC

3.USBD-

10.USBOC

5.USBD+

7.Ground

9.No Pin

8.Ground6.USBD+

4.USBD-2.VCC

WchtgBtte beachten Se, dass Se de mt VCC (Stromfhrende Letung) und GND (Erdle-tung) bezechneten Pns korrekt verbnden mssen, ansonsten kann es zu Schden kommen.

CD-Engang: JCD1Deser Anschluss wrd fr externen Audoengang zur Verfgung gestellt.

4.R3.Ground

2.Ground

1.L

De-18

MS-7636 Manboard

S/PDIF-Ausgang: JSP1De SPDIF (Sony & Phlps Dgtal Interconnect Format) Schnttstelle wrd fr de ber-tragung dgtaler Audodaten verwendet.

1.VCC

2.SPDIF

3.Ground

S/PDIF Slotblech (Optonal)

Parallele Schnttstelle: JLPT1De Parallele Schnttstelle st ene Standard Druckerschnttstelle, de ebenso als En-hanced Parallel Port (EPP) und als Extended Capabltes Parallel Port (ECP) betreben werden kann.

10.Ground

14.Ground8.LPT_SLIN#

12.Ground6.PINIT#4.ERR#

2.AFD#

24.Ground

22.Ground

26.No Pin20.Ground

18.Ground16.Ground

1.RSTB#

3.PRND0

5.PRND1

7.PRND2

9.PRND3

11.PRND4

13.PRND5

15.PRND6

17.PRND7

19.ACK#

21.BUSY

23.PE

25.SLCT

De-19

Deutsch

Audoanschluss des Frontpanels: JAUD1Deser Anschluss ermglcht den Anschluss von Audoen und -ausgngen enes Front-panels. Der Anschluss entsprcht den Rchtlnen des Intel Front Panel I/O Connectv-ty Desgn Gude.

1.MIC L

3.MIC R

10.Head Phone Detection

5.Head Phone R

7.SENSE_SEND

9.Head Phone L

8.No Pin6.MIC Detection

4.PRESENCE#

2.Ground

TPM Modul Anschluss: JTPM1Deser Anschluss wrd fr das optonale TPM Modul (Trusted Platform Module) ver-wendt. Wetere Informatonen ber den Ensatz des optonalen TPM Modules entnehm-en Se btte dem TPM Plattform Handbuch.

10.No Pin

14.Ground8.5V Power

12.Ground6.Serial IRQ

4.3.3V Power

2.3V Standby power

1.LPC Clock

3.LPC Reset

5.LPC address & data pin0

7.LPC address & data pin1

9.LPC address & data pin2

11.LPC address & data pin3

13.LPC Frame

De-20

MS-7636 Manboard

Steckbrcke

Steckbrcke zur CMOS- Lschung: JBAT1Der Onboard CMOS Specher (BIOS), enthlt Grundnformatonen sowe erwete E-stellungen des Manboards. Der CMOS Specher wrd ber ene Bettere mt Strom versotgt, damt de Daten nach Abschalten des PC-systems erhalten bleben. Weterhn snd Informatonen fr den Start des Systems n dem Specher hnterlegt. Sollten Se Fehlermeldungen whrend des Startvorganges erhalten, kann en Zurcksetzen des CMOS Spechers n den ursprnglchen Werkszustand helfen. Drcken Se dazu lecht den Schalter.

WchtgWenn das System ausgeschaltet st, knnen Se de Steckbrcke auf den Pol 2 und 3 stecken, um de Daten m CMOS zu lschen. Stecken Se anschlend de Steckbrcke auf den Pol 1 und 2 zurck. Versuchen Se nemals de Daten m CMOS zu lschen, wenn das System engeschaltet st. De Hauptplatne kann dadurch beschdgt.

JBAT1 Halten Daten Lschen Daten

1 11

De-21

Deutsch

Schalterbertaktung Schalter: OC_SW1(optonal)Mt der nderung der Schalter (s. Tabelle) kann der Prozessor-Takt erhht werden, womt de Prozessorfrequenz bertaktet wrd. Folgen Se den Anwesungen, um de entsprechenden Overclockng-Werte zu erhalten.

Default Erhhen der CPU- Geschwndgket um 10%

Erhhen der CPU- Geschwndgket um 15%

Erhhen der CPU- Geschwndgket um 20%

WchtgStellen Se btte scher, dass der PC ausgeschaltet st, bevor Se de Schalter und FSB Werte ndern.De bertaktungsverhalten hngt von dem Systemaufbau (de Specherfhgket, thermsche Lsung...etc) ab, und es wrd ncht garantert.

De-22

MS-7636 Manboard

SteckpltzePCIE (Perpheral Component Interconnect Express) SteckplatzDer PCI Express-Steckplatz untersttzt ene Erweterungskarte mt der PCI Express-Schnttstelle.

PCI Express x16 Steckplatz

PCI Express x1 Steckplatz

PCI (Perpheral Component Interconnect) SteckplatzDer PCI-Steckplatz kann LAN-Karten, SCSI-Karten, USB-Karten und sonstge Zusatz-karten aufnehmen, de mt den PCI-Spezfikatonen konform snd.

32-bt PCI Steckplatz

PCI-Unterbrechungsanforderungs-RoutngEne IRQ (Interrupt Request; Unterbrechungsanforderung)-Letung st ene Hardwarele-tung, ber de en Gert Unterbrechungssgnale zu dem Mkroprozessor schcken kann. De PCI IRQ-Pole werden n der Regel mt dem PCI-Bus-Polen we folgt verbunden:

Folge1 Folge2 Folge3 Folge4PCI Steckplatz1 INT E# INT F# INT G# INT H#

WchtgAchten Se darauf, dass Se zuerst das Netzkabel aus der Steckdose herauszehen, bevor Se ene Erweterungskarte nstalleren oder entfernen. Denken Se btte auch daran de Dokumentaton der Erweterungskarte zu lesen, um notwendge Hardware- oder Softwareenstellungen fr de Erweterungskarte we z.B. Jumper-, Schalter- oder BIOS-Enstellungen vorzunehmen.

De-23

Deutsch

led StatuSdikatoren

APS LEDDese APS (Actve Phase Swtchng) LEDs zegen den gegenwrtgen CPU Strrompha-se Modus an. Lesen Se de folgenden Anwesungen.

: EIN, : AUS

De LED leuchtet, wenn CPU n de 2 oder 3 Phase Strommodus st. De LED aus st, wenn CPU n de 1 Phase Strommodus st.

APS LED

De-24

MS-7636 Manboard

bioS SetupDeses Kaptel enthlt Informatonen ber das BIOS Setup und ermglcht es Ihnen, Ihr System optmal auf Ihre Anforderungen enzustellen. Notwendgket zum Aufruf des BIOS besteht, wenn:

Whrend des Bootvorgangs des Systems ene Fehlermeldung erschent und Se zum Aufruf des BIOS SETUP aufgefordert werden.Se de Werksenstellungen zugunsten ndvdueller Enstellungen ndern wol-len.

WchtgDe Menpunkte jeder BIOS Kategore, de n desem Kaptel beschreben wrd, werden permanent auf den neuesten Stand gebracht, um de Systemlestung zu ver-bessern. Aus desem Grunde kann de Beschrebung gerngfgg von der aktuellsten Verson des BIOS abwechen und sollte dementsprechend ledglch als Anhaltspunkt denen.Whrend des Hochfahrens, wrd de BIOS Verson n der ersten Zele nach dem Ho-chzhlen des Spechers angezegt, blcherwese m Format deses Bespels:

A7636IMS V1.0 102009 wobe: De erste Stellen den BIOS-Hersteller bezechnet, dabe glt A = AMI, W = AWARD, und P = PHOENIX. 2te - 5te Stelle bezechnen de Modelnummer. 6te Stelle bezechen den Chpsatzhersteller, A = AMD, I = Intel, V = VIA, N =Nvda. 7te - 8te Stelle bezehen sch auf den Kunden, MS=alle Standardkunden. V1.0 bezeht sch auf de BIOS Verson. 102009 bezechnet das Datum der Verffentlchung des BIOS.

De-25

Deutsch

Aufruf des BIOS SetupsNach dem Enschalten begnnt der Computer den POST (Power On Self Test -Selb-stberprfung nach Anschalten). Sobald de Meldung unten erschent, drcken Se de Taste () um das Setup aufzurufen.

Press DEL to enter SETUP(ENTF drcken, um das Enstellungsprogramm zu ffnen)

Wenn de Nachrcht verschwndet, bevor Se reageren und Se mchten mmer noch ns Setup, starten Se das System neu, ndem Se es erst AUS- und danach weder ANSCHALTEN, oder de RESET-Taste am Gehuse bettgen. Se knnen das Sys-tem auerdem neu starten, ndem Se glechzetg de Tasten , und drcken (be manchen Tastaturen , und ).

Hlfe findenNach dem Start des Setup Mens erschent zuerst das Hauptmen.

HauptmenDas Hauptmen lstet Funktonen auf, de Se ndern knnen. Se knnen de Steuer-tasten ( ) verwenden, um enen Menpunkt auszuwhlen. De Onlne-Beschrebung des hervorgehobenen Menpunktes erschent am unteren Bldschrmrand.

BldschrmrandWenn Se an der lnken Sete bestmmter Felder en Dreeckssymbol finden (we re-chts dargestellt), bedeuted des, dass Se ber das entsprechende Feld en Untermen mt zustzlchen Optonen aufrufen knnen. Durch de Steuertasten ( ) knnen Se en Feld hervorheben und durch Drcken der Engabetaste n das Untermen gelangen. Dort knnen Se mt den Steuertasten Werte engeben und navgeren. Durch Drcken von kommen Se zurck ns Hauptmen.

Allgemene Hlfe Das BIOS Setup verfgt ber ene Allgemene Hlfe (General Help). Se knnen dese aus jedem Men enfach durch Drcken der Taste aufrufen. Se lstet de Tastenund Enstellungen zu dem hervorgehobenen Menpunkt auf. Um de Hlfe zu verlassen, drcken Se .

De-26

MS-7636 Manboard

Das Hauptmen Nachdem Se das BIOS CMOS Setup Utlty, aufgerufen haben, erschent das Haupt-men. Es west zehn Setup- Funktonen und zwe Arten das Men zu verlassen auf. Verwenden Se de Pfeltasten, um m Men zu navgeren und drcken Se de Eng-abetaste (), um en Untermen aufzurufen.

Standard CMOS FeaturesIn desem Men knnen Se de Basskonfiguraton Ihres Systems anpassen, so z.B.Uhrzet, Datum usw.

Advanced BIOS FeaturesVerwenden Se desen Menpunkt, um wetergehende Enstellungen an Ihrem Systemvorzunehmen.

Integrated PerpheralsVerwenden Se deses Men, um de Enstellungen fr n das Board ntegrertePerpheregerte vorzunehmen.

Power Management SetupVerwenden Se deses Men, um de Enstellungen fr de Stromsparfunktonenvorzunehmen.

H/W MontorDeser Entrag zegt den generellen Systemstatus.

Green PowerVerwenden Se deses Men um Enstellungen der Stromversorgung vorzunehmen.

BIOS Settng PasswordVerwenden Se deses Men, um das Kennwort fr das BIOS enzugeben.

Cell MenuHer knnen Se Ihre Enstellungen zur Kontrolle von Frequenz und Spannung und zurbertaktung vornehmen.

De-27

Deutsch

M-FlashIn desem Men knnen Se das BIOS vom Specher-Antreb abtasten/ aufblnken (nur FAT/ FAT32 Format).

Overclockng ProfileAbspechern/ laden de Enstellungen m/ vom CMOS fr BIOS.

Load Fal-Safe DefaultsIn desem Men knnen Se ene stable, werksetg gespecherte Enstellung des BIOS Spechers laden. Nach Anwhlen des Punktes schern Se de nderungen und starten das System neu.

Load Optmzed DefaultsIn desem Men knnen Se de BIOS-Vorenstel l ungen laden, de der Manboardher-steller zur Erzelung der besten Systemlestung vorgbt.

Save & Ext SetupAbspechern der BIOS-nderungen m CMOS und verlassen des BIOS.

Ext Wthout SavngVerlassen des BIOS ohne Specherung, vorgenommene nderungen verfallen.

De-28

MS-7636 Manboard

Wenn Se das BIOS Denstprogramm ffnen, folgen Se den untenstehenden An-wesungen.

Laden der optmalen Vorenstellung : Verwenden Se de Steuerschlssel (), um dem Laden der optmalen Vorenstellung zu whlen und drcken Se auf . Dann erschent de folgende Meldung:

1.

Drcken Se auf [OK] und , um de m Werk engestellten Standardwerte fr ene optmale Systemlestung zu laden.

De Datum/Zet Enstellung : Whlen Se de Standard-CMOS Features vor und drcken Se um das Standard-CMOS Features-Men zu whlen. Pas-sen Se nun de Felder Datum und Zet an.

2.

Abspechern u. Beenden der Enstellung: Verwenden Se de Steuerschlssel (), um dem Abspechern u. Beenden der Enstellungen zu whlen und drcken Se auf . Es erschent folgende Meldung:

3.

Drcken Se auf [OK] und , um de (neuen) Enstellungen zu spechern und das BIOS Setup zu verlassen.

WchtgDe Konfiguraton oben denen nur generellen Zwecken. Wenn Se detallerte BIOS- Enstellungen bentgen, dann sehen Se btte das Handbuch n Englscher Sprache auf der MSI Webste en.

De-29

Deutsch

Cell Menu Introducton : Das Men st fr den weteren Benutzer, der de Haupt-platne bertakten mgen.

4.

WchtgNur wenn Se mt dem Chpsatz vertraut snd, knnen Se de Enstellung ndern.

Current CPU/ DRAM/ CPU-NB Frequency Zegt de derzetge Frequenz der CPU, Specher und de Geschwndgket des CPU-NBs. Nur Anzege.

CPU SpecficatonsDrcken Se de Engabetaste , um das Untermen aufzurufen. Das Untermen zegt de Informaton des nstallerten CPUs.

CPU Technology SupportDrcken Se de Engabetaste , um das folgende Untermen aufzurufen. Das Untermen zegt den Technologen, de angebrachte CPU sch untersttzt.

CPU FeatureDrcken Se de Engabetaste , um das Untermen aufzurufen:

De-30

MS-7636 Manboard

Intel EISTDe erhhte Intel SpeedStep Technologe erlaubt Ihnen, das Lestungsgrad des M-kroprozessors enzustellen, ob der Computer auf Battere oder Wechselstrom luft. Deses Fgur erschent, nachdem Se das CPU anbrngen, das Speedstep Tech-nologe sttzen.

Intel C-STATEC-Status st en Stromsparfunktonaltt-Zustand, der der Strom des Prozessor whrend des Leerlaufs erheblch verrngert. Es wrd erschenen, wenn der CPU der C-Status Technologe untersttzt.

C State Package Lmt SettngHer knnen Se de Stufe des C-State vorwhlen. Wr empfehlen, dass Se de Enstellung auf "Auto" setzen.

C1E SupportWhrend des Leerlaufs aktvert de Funkton, um de Stromaufnahme lesen. Ncht alle Prozessor untersttzt Enhanced Halt Stand (C1E).

OverSpeed ProtectonDe Funkton des "Overspeed Protecton" kann den aktuellen CPU Status sowe sene Lestungsaufnahme berwachen. Wenn es en bestmmtes Nveau berstegt, verrngert der Prozessor automatsch sene Taktrate. Wenn Se zum bertakten Ihr CPU wnschen, stellen Se se auf [Dsabled].

Hyper-Threadng Functon Der Prozessor verwendet de Technologe des Hyper-Threadngs, um Verhandlun-grate zu erhhen und de Antwortzeten des Benutzers zu verrngern. De Tech-nologe behandelt den dual-core Prozessor als zwe logsche Prozessoren, de Anwesungen glechzetg durchfhren knnen. Somt, das Systemlestung wrd hochverbessert. Wenn Se de Funkton ausgeschaltet, verwendet der Prozessor nur enen Kern, um de Anwesungen durchzufhren. Btte deaktveren Se de Funk-ton wenn Ihr Betrebssystem ncht HT Funkton sttzt, oder Unzuverlssgket und Instabltt knnen auftreten.

WchtgFr das Ermglchen der Funktonaltt der Hyper-Threadng Technologe wrd de ALLE folgende Systemkonfiguraton empfohlen:

CPU: En Intel Processor mt der HT-Technologe;Chpsatz: En Intel Chpsatz, das de HT-Technologe untersttzt;BIOS: De HT-Technologe wrd untersttzt und st aktvert; OS: Das Betrebssystem untersttzt de HT-Technologe.

Wetere Informatonen zu Hyper-threadng Technologe finden Se unter:http://www.ntel.com/products/ht/hyperthreadng_more.htm

Execute Bt SupportDe Funktonaltt des Intels Execute Dsable Bts kann bestmmte Kategoren der bswllgen Buffer Overflow Angrffe verhndern, wenn es mt enem sttzenden Betrebssystem kombnert wrd. Das Execute Dsable erlaubt dem Prozessor, enzu-stufen Bereche m Specher durch, dem Anwendung Code durchfhren kann und

De-31

Deutsch

dem er ncht kann. Wenn ene bswllge Wurm versucht de Code m Puffer enzu-setzen, sperrt der Prozessor dem Codeablauf, der Schadenverhnderung oder Wur-mausbretung.

Set Lmt CPUID MaxVal to 3Max CPUID Value Lmt kann de aufge