Dear customer, Thank you very much for your purchasing of the 2 way car alarm products we manufactured . 1. This product is designed to install on all 12V universal vehicle. The system possesses multi- functions. For your understanding about the product, read the instruction carefully to implement its features fully. 2. If the system manual shows note like “refer Alarm function Rprogrammed!, this function "ecomes effective only afterinstallation of additional e#uipment as is re#uired "y the system and also needed to "e program. $. %esides the functions descri"ed in the manual, the system can also support the following products& A) ngine !tart "odule# $hen combined %ith engine start module, it is possible to remote control and monitor of vehicle li&e engine start or shutdo%n 'effective range about 1((( meters). %' ()* *odule +*o"ile hone *odule'& -hen com"ined with ()* module, if the vehicle is in an a"normal condition, system will automatically notify twoway remote. *oreover, it will send a short message +)*)' and make a phone call to inform car owner a"out car condition. /n the phone, ()* module will automatically play voice message which tells carowner0s car condition. /f course, from outside call in to the machine go through the voice message guide to make command such as system arm1disarm, door lock1unlock, engine start1 shut down etc3ou even can use short message +)*)' to control system. The system can "e programmed to hold 4 different sets of phone num"ers to inform car owner. %ecause of using the telephone net, car owner at anytime and anywhere to know car condition. 5' )atellite Tracking *odule +()*1()1(I)'& -hen com"ined with satellite tracking module, all the a"ove functions in +%' ()* *odule would "e included in the system. *oreover, car owner can use short message +)*)' to notify location of the car. %ecause the system includes (I) +(eographic Information )ystem', car owner can use the short message displays in mo"ile phone in order to find out the location of the car. *e ssage also told owner car status such as if the car is on the move or not and with report of speed of the car +km1hr'. -hen car had "een lost, the message would "e a"le to trace it. This function helps car owner to search car "ack without the need of 6map, DA and other people0s assistance . 7
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Reset new I@ code ress 4 times, siren chips Ignition /@ress 7 times siren chips H )et 7st new I@
coderess 7 times siren chips H )et 2nd new I@ code
Alarm function programma"le
ress 9 times, siren chips If ignition turnoff is followed "y siren chirps. )ystem enters
alarm function programma"le stage.
)tart function programma"le ress : times, siren chips If ignition turnoff is followed "y siren chirps. )ystem enters
start function programma"le stage.
8earn codes of new
remote.
ress < times, siren chips Ignition /n is followed "y siren chirps system enter learn
codes mode.
Reset to alarm function
factory default
ress times siren chips Ignition /n is followed "y siren chirps. ress switch one
time, system chirps, press remote "utton* +)ystem resets
function to factory default
Reset to start function
factory default
ress 7C times siren chips Ignition /n is followed "y siren chirps. ress switch one
time, system chirps, press remote "utton* +)ystem resets
function to factory default
Remote door lock/arm audio and mute! alert
7. -hen system enters arm mode, alter 86D flashes to avoid thief "reak in. If car under security system, door, trunk, hood,
ignition, "rake and shock sensor would "e guarded. If system had "een triggered, engine can0t start "y using the key and
siren chirps and 2way remote gets triggered message simultaneously.
2. ress and release "utton7 /)iren chirp once +or no chips if in mute mode' with parking light flash. The car door is
locked and system enters arm mode. Refer picture @o.2 or $
$. Window auto roll u" / After the main system enters arm1lock.it auto roll up the electronic powered window +an
accessory is re#uire refer Alarm function R programmed : times '.4. Defecti#e $one %y"ass/If system enters arm mode. the system siren sounds long chirps 4 times and1or the remote unit
7. -hen valet turn /@, the system0s all functions are inoperative eEcept for the remote door lock1unlock and trunk releases
and check search car remain opera"le
2. The system must "e in disarm mode. ress and hold "utton7 for level shift ,then ress and release "utton7 to
select /n1/ff valet /n or /. If select it in /@ mode the 85D remote will show it. Refer picture @o.77urpose& Avoid others to make unnecessary commands. or eEample, friends or repairer play your remote.
Remote check car status
7. ress and release "utton$ to check the current car status. The parking light flashes $ times.
2. The current car status will show on remote 85D.
Remote car search
ress and release twice "utton$ The system siren chirps : times with : flashes light to help easily locate the car.
Remote acti#e channel 0 1
ress and hold "utton $ for level shift ,then ress and release "utton$ To active channel B7 +for eEample' trunk
release. The parking light will flash. Refer picture @o.7C +refer Alarm function R program '.
urpose& ser can use this function in order to control car e#uipments.
Remote "anic
7. .&nition must %e at OFF "osition*
2. ress and hold7 with2 "utton together , the parking light flashes $ times and siren chirps $ times. The system
2. ress and hold7 with2 "utton simultaneously. The system will enter full stage of anticar>ack mode.
$. -hile the remote anticar>ack is "eing activated, press and release "utton2 "utton to disa"le this function.urpose& 6ngine will shutdown and can not start any more when car has "een ro""ed.
'witch-controlled anti-car,ack stand%y and cancel
1* urn O/OFF anti-car,ack at stand%y mode/
7.7' o turn O anti-car,ack stand%y mode/Ignition must "e at /@ and with all the doors closed if push multi function
switch one time ,the system will enter anticar>ack stand"y mode.
7.2' Disa%le anti-car,ack at stand%y mode/Just turn off ignition without opening the car door. The system will >ump out
of anti car>ack stand"y mode.
2* o tri&&er anti-car,ack mode/
2.7' ri&&erin& of anti car,ack first sta&e mode /During anticar>ack stand"y mode. If the door is opened and close, the
system enter anticar>ack trigger first stage mode. The parking light flashes for $C sec to show first stage mode is initiated
"ut the siren did not chirps the engine is running normally at this stage. If first stage mode didn0t interrupted on time, the
system will enters second stage anticar>ack mode. Refer to picture @o.72
2.2' 3nter second sta&e of anti-car,ack mode/ollow first stage system will auto into anticar>ack second stage mode the
parking light flashes with siren chirps for $C sec when this stage initiates. 6ngine will keep on running. If this stage is not
interrupted, full anti car>ack function will "e triggered.
2.$' o disa%le first and second sta&e anti-car,ack mode/ress and release remote "utton2 or +press and hold multi
function switch $ sec. the siren chirps then turn ignition /'. The system will >ump out of anti car>ack mode.
4* 3nter full sta&e of anti-car,ack mode/ollow second stage system will auto into anticar>ack full triggering stage
mode. system have A0% kind of state.+refer alarm R programmed 77 '.
A' (nti-car,ack safe mode/The parking light flashes with siren alert which time if "rake pedal is depressed the
engine runs chokes for 49 sec then shuts down the engine. If in this time the ignition still at /@ position the parking
light and siren continuous flashes and alert.
@ote/)elect safe mode the main unit orange1violet wire needs connect to pedal "rake switch%' (nti-car,ack auto mode/The parking light flashes with siren alert the en&ine runs chokes for 49 sec then shuts
down the engine. If in this time the ignition still at /@ position the parking light continuous flashes and siren alert.
5* o disa%le full sta&e of anti-car,ack mode/The system have A0% kind of way to turn / full stage of anticar>ack
+ refer alarm R programmed 9 to controlled "y secure I@ code or not '.
A' or system uncontrolled "y I@ code/ress and release remote "utton2 "utton +or' press G hold multi
function switch for$ sec. Turn ignition / when siren chirps. Anticar>ack triggering mode is disa"led "ut system
still remains in arm mode.
%' or system controlled "y secure I@ code/Anticar>ack triggering can only "e done "y means of secure I@ code.
Refer to secure I@ code procedure.
'to" and &o
7. To identify engine is running "y key and ignition at /@ position
2. /pen the door then get off the vehicle and don0t close the door.
$. ress and release "utton2 then close all the car doors.
4. ress and release "utton7 of the remote. The system enters arm1lock mode "ypassing shock sensor and ignition.
+ If the system doesn0t enter arm mode within 79 seconds, the stop and go feature will not be available.)
urpose& 5ar is under security system when user leave car in short period of time and engine is still running.
2 @eed to "e confirmed that system is settled in which of following situations in
order to set up this function. The system have A0% kind of way to manual arm or disarm system + depend alarm R
programmed 9 to controlled "y secure I@ code or not '.
A' For system uncontrolled %y secure P. code/-hile system at arm mode If user want to manual to “disarm!
system . Turn the ignition key to /@ position and need open the door. ush “$0 time the multi function switch. Thenturn off ignition the siren will chirp to indicate "ecome disarm.
%' For system controlled %y secure P. code/Refer use I@ code procedure.
8se P. secure code "rocedure
7. The system had to programmed to secure I@ code mode "efore if want to using I@ code procedure to manually disarm
and to deactivate the antihi>ack in finally stage active mode. If didn0t programmed to I@ code mode that can0t using I@
code to disarm system.
2. The system default I@ code digit num"er is
+ow to use P. code to disarm the system
$.7' Turn the ignition to /@ position and it is necessary to open car door.
$.2' ress and release the multi function switch 9! times +K is “7!as the factory default or the new 7st digit if reassigned'
$.$' Turn the ignition /. Then turn /@ the ignition again.
$.4' ress and release the multi function switch :! times +: is “7!as the factory default or the new 2nd digit if reassigned'
$.9' Turn the ignition /. After the system verifies I@ codes, it disarms itself.
$. The I@ code can "e reassigned "y the car owner. Refer to the procedure to enter I@ setting mode and reassign a new
2. ress and release multi function switch;5;times then turn the ignition /@ which is followed "y 4 siren chirps.
$. ress multi function switch once then siren a chirp to confirm into set new I@ 7st digit code 9! time. To using remote to
set first digit code refer "elow.
$.7' To assign I@ code digit num"er at “7! time. ress and release7 "utton remote unit. The siren 7 chirp to confirm.$.2' To assign I@ code digit num"er at “2! time. ress and release2 "utton remote unit. The siren 2 chirp to confirm.
$.$' To assign I@ code digit num"er at “$! time. ress and release$ "utton remote unit. The siren $ chirp to confirm.
$.4' To assign I@ code digit num"er at “4! time. ress and release4 "utton remote unit. The siren 4 chirp to confirm.
4. ress multi function switch once again then siren 2 chirps to confirm into set new I@ 2nd digit code :! time. To using
remote to set first digit code refer "elow.
4.7' To assign I@ code digit num"er at “7! time. ress and release7 "utton remote unit. The siren 7 chirp to confirm.
4.2' To assign I@ code digit num"er at “2! time. ress and release2 "utton remote unit. The siren 2 chirp to confirm.
4.$' To assign I@ code digit num"er at “$! time. ress and release$ "utton remote unit. The siren $ chirp to confirm.
4.4' To assign I@ code digit num"er at “4! time. ress and release4 "utton remote unit. The siren 4 chirp to confirm.
9. Turn the ignition to / finish set I@ code process.
:. 3ou are advised to note down the new I@ codes for your future reference.
urpose& ser can having his1her own I@ code for security need.
Learn codes of the new remote transmitter
7. Ignition had to at / position.
2. ress multi function switch*<+times. Then immediate turn ignition to /@ position. The siren G 86D indicator will “<!
chips and "urn the mean is system into learn newly remote mode process.
$. ress and release newly remote "utton$ G 4 simultaneously till the siren chirps 7 time confirming code learning is
urpose& In winter, remote engine start will help car to warm up however, in summer it will turn on air condition system.
=ow to shift to keycontrolled engine run afterwards the remote engine run is done.
After engine run "y remote unit, driver gets inside and inserts the ignition key. Turn it to /@ position and then step on
the "rake. -hen parking light flashes 4 times and 85D screen displays Ney icon, the engine run is "eing controlled "y key. Turning the ignition to / can shut down the engine.
2.7' -hen remote engine start and the door was closed system will enter arm and lock mode automatically.+ refer start R
programmed 4 times '.
urpose& )ecurity system is activated when remote engine start.
2.2' The parking light flashes slowly while the engine is running.+ refer start R programmed : '.
%' 6ngine will automatically shutdowns after its programmed runtime is over for eEample 9 minutes+refer start R
programmed 2 '.
$.7' -hile at arm mode and remote engine shutdown. The system will auto relock again or the car with the factoryinstalled
device of auto doorunlock upon ignition.+ refer start R programmed < '.
Remote en&ine start or shutdown for*manual &ear car+
7. The following procedures are for system enters stop and go feature
2. 8et engine run "y ignition key. Door must close. %rake pedal is depressed and press and release2 "utton, system
ignition relay will active.
$. The key turn ignition off while the engine is still running +6ngine goes on running at this stage "y system'.
4. Then open the car door. (et off and reclose the door
9. ress and release7 the system to make system enter arm1lock +6ngine will automatically shut off at this stage'.The
system0s start is opera"le afterwards. If there is any mistake in the procedures, the system0s engine start is disa"led.
:. ress and hold "utton2 for level shift ,then ress and release "utton2 to remote engine start +or' shutdown.
$. Immediately turn ignition /@. The siren sounds : chips G 86D
indicator flashes to indicate function R programma"le mode is
activated.
4. -hile in the active programming mode. 6ach press on multi function
switch is followed "y one siren chirp G one 86D flash and each fifth
press is followed "y a long chirp* 5hirping pattern ena"les the
programmer to know which features active mode he has achieved.
9. -hen the desired function changea"le level is reached, press the
related "utton for function selection. )iren chips 7O 4 times for
confirmation. Refer to "elow R feature program ta"le.+as shown in
the Default change "y remote0s "utton column'. The factory default is
descri"ed in the shaded "ackground.
:. After 7C sec or turning off ignition, system will automatically >ump
out R feature programming.
Restore RF start function to factory default
7. 8et ignition at /ff position
2. ress multi function switch *7C+ times
$. Immediately turn ignition. /n The siren sounds 7C chips G 86D
flashes to confirm system0s entry into stand"y R function to factory
default setting.
4. ress multi function switch 7 time The siren chips again .Then use
remote "utton * +to get the system restore R features to the
factory
?elow functions need en&ine start module
't
)tart function R program ta"le Default change "y remote0s "utton*.. switch eatures active mode with factory default *7 + *2 + *$ + *4 +7st 6Etra engine running time 3 /ff 4 7 min 4 $ min 4 : min
2nd 6ach time remote running time 3 9 4 7C 4 79 4 2C