72 M-AX Extreme Duty - Brush Cutters for Skid …...Skid Steer Auxiliary Hydraulic Flow: The 72 M-AX Extreme Duty is only to be used on a skid steer with auxiliary hydraulic flow rated

— 1 — www.brushwolf.com

72 M-AX Extreme Duty

Owner / Operator Instruction & Maintenance

Manual

— 2 —

Before operation of your Brush Wolf 72 M-AX read the entire contents of this manual

Congratulations on your purchase of the Brush Wolf 72 M-AX Extreme Duty Rotary Brush Cutter. At Cross-Tech Manufacturing we take great pride in the design and manufacturing of our products. We appreciate your business and are confident your Brush Wolf will provide many years of reliable service. Welcome to the Brush Wolf family of attachments.

The 72 M-AX Extreme Duty Rotary Brush Cutter is engineered to cut brush and can cut trees up to 8 inches in diameter dependant upon the type of wood and the density of the vegetation.

For your safety and the safety of others, please read the entire contents of this man-ual prior to the operation of the Brush Wolf 72 M-AX.

If you have questions regarding your Brush Wolf, contact your dealer.

Please take the time to fill out the Warranty Registration Form contained in this manual or go on-line at Brushwolf.com. A Warranty Registration Form must be on file within thirty days of the purchase date in order for warranty claims to be val-id. A full description of the warranty and process for submittal can be found on the back cover of this manual.

To ensure prompt and accurate information when working with your dealer re-garding your Brush Wolf 72 M-AX please complete the Owner Reference Informa-tion below. The information will be vital for service, repair and warranty inquiries.

OWNER REFERENCE INFORMATION

Date Purchased:

Dealer Name:

Dealer Phone:

Model Number:

Serial Number:

Thank you for your business!


THIS PAGE IS INTENTIONALLY

BLANK

— 4 —

Table of Contents

Foreword.............................................................................................2

Safety Section.....................................................................................6

Operation Instructions....................................................................8

Maintenance....................................................................................10

Maintenance Checklist.................................................................12

Troubleshooting.............................................................................13

72 M-AX STD Parts Diagram.......................................................14

72 M-AX Standard Flow Parts List.............................................15

72 M-AX HF Parts Diagram.........................................................16

72 M-AX High Flow Parts List.....................................................17

Parts List and Diagram - Drop Blade Carrier - 3 blade assembly......................18

Drop Blade Replacement Instructions.....................................19

Parts List and Diagram - Flat Blade Carrier - 4 flat blade assembly..................20

Flat Blade Replacement Instructions........................................21

Dealer Checklist..............................................................................22

Warranty Registration..................................................................23

Warranty Information..................................................................24



BLANK

— 6 —

The following safety instructions are provided to alert you to precautions which, if not followed, may cause serious injury to yourself or others. Please read these instructions com-pletely. Cross-Tech Manufacturing can not cover every incident that might be a hazard. Extreme caution should be used at all times. Only use Brush Wolf Brush Cutters for the purpose for which they have been designed. Always operate skid steer with a forestry rated door and cab. Safety goggles and hearing protection must be worn at all times.

Site Inspection: Before operation of the Brush Wolf 72 M-AX, carefully inspect the area to be cleared. Remove any items which may be picked up and thrown by the cutting blades; wire, pipes, or rocks. Mark any object too large to move.

Equipment Inspection: Prior to inspection the unit must be disconnected from the skid steer. To inspect or to make repairs under the 72 M-AX deck always block the unit securely in order to prevent accidental release of the lift mechanism. Inspect all hydraulic hoses and shields to ensure they are in good condition and without holes before pressurizing. Hydrau-lic fluid can escape under pressure and may cause serious injury or death. Wear safety gog-gles, ear protection, hard hat, and only operate the skid steer behind shatter proof forestry rated door and cab.

Skid Steer Auxiliary Hydraulic Flow: The 72 M-AX Extreme Duty is only to be used on a skid steer with auxiliary hydraulic flow rated at 30 - 40 GPM (Gallons Per Minute). Any less GPM and the 72 M-AX will not operate at peak proficiency.

Do Not operate within 300’ of bystanders, vehicles, pets, livestock or buildings. Objects may discharge while cutting with the 72 M-AX and has the potential to cause injury or death.

Do Not place hands, feet or other objects under the deck while the Brush Wolf 72 M-AX is in operation. To inspect or perform maintenance under the deck, always shut down the power to the Brush Wolf, shut-off the skid steer engine, disconnect hydraulic hoses, and block the unit.

Do Not raise the mower deck when blades are rotating. Operation with the mower raised will expose the cutting blades and the potential for injury or death.

Do Not allow children to operate a rotary brush cutter. Only individuals with skid steer experience who are well acquainted with the rules of safe operation should be allowed to operate the Brush Wolf 72 M-AX.

Safety Instructions


Safety Instructions

Do Not operate the Brush Wolf 72 M-AX in conditions with poor visibility.

Do Not expose the underside of the blades towards the cab.

Do Not operate while intoxicated or if taking medications that may impair your senses or reac-tions.

Do Not attempt to straighten blades. Order replacement blades if blades are bent, cracked or damaged.

Do Not leave the Brush Wolf 72 M-AX unattended while in a raised position. Always make sure both the runners are placed firmly on the ground and shut down the skid steer.

Do Not continue operation if an unexpected object is struck. IMMEDIATELY shut down power to both the attachment and the skid steer. Disconnect from the hydraulic couplers from the power source. Evaluate the damage, repair and the test unit before operation.

Do Not allow anyone or any item on top of the mower deck when in operation.

— 8 —

Operation Instructions

1. Prior to operation check blades and replace if cracked or damaged. All blades must be re-placed at the same time. Tighten the blade carrier to the bearing housing, blade bolts/nuts, and hydraulic motor mount nuts. Check the hydraulic fluid. A low level could indicate a leak and require a closer inspection of your unit.

2. Connect the Brush Wolf 72 M-AX to your skid steer with the universal quick-tach mount.

3. Once connected, visually check the lock pins to make sure the 72 M-AX is securely locked in place. Do Not operate the Brush Wolf 72 M-AX HF on Low Flow auxiliary hydraulic or any skid steer rated under 30 GPM. All 72 M-AX HF units are designed to operate on skid steers rated with auxiliary hydraulic flow of 30 - 40 GPM. 72 M-AX Standard Flow is rated for skid steers with auxiliary hydraulics of 23 -29 GPM.

4. Inspect the hydraulic couplers and wipe off water, dust or any debris. Dirt and debris can damage hydraulic components. Once cleaned, connect the couplers from the cutter to the auxiliary hydraulic system on the skid steer.

5. Connect the auxiliary hydraulic lines for the brush cutter and case drain to the skid steer. Twist the collars of the quick connect couplers to secure the hydraulic connections.

6. Confirm all safety measures have been completed per the Safety Instructions. Most impor-tantly make sure the area is clear of personnel and pets.

7. Enter shatter-proof cab door, engage seat belt, release brake and start engine. The runners of the 72 M-AX should be as close to the ground as possible. Never raise the 72 M-AX more than seven (7) inches off the ground.

8. Slowly apply hydraulics to the Brush Wolf 72 M-AX and increase the engine speed to high idle. Make sure the unit is operating smoothly before moving the skid steer forward. When temperatures are below zero allow additional time for hydraulic fluids to warm-up.

9. Maintain a speed to handle the volume of brush and to prevent stalling.

10. Stay alert for drop-offs, rocks, holes, abandoned wells and septic tanks. Do not operate or drive across a steep embankment as this may cause a rollover with possible injuries or death.

11. To cut large diameter brush and trees, move forward slowly to make the cut.

12. <IMPORTANT> Proper shut down procedures: lower lift arms, make sure the cutter is placed flat on the ground, shut off the switch for the auxiliary hydraulics, once hydraulics are shut off then slowly throttle down the skid steer, stop the engine, and engage parking brake prior to leaving the cab.

13. To disconnect hoses use proper hand protection as the couplers may be hot.



BLANK

— 10 —

Maintenance

Your new Brush Wolf 72 M-AX Exteme Duty is a precisely engineered attachment and re-quires little maintenance. The Brush Wolf 72 M-AX is built to strict standards and will deliver years of dependable service by following these maintenance guidelines:

1. Perform maintenance on level surface with the unit firmly on the ground. Shut off the hydraulic power supply and disconnect hydraulic couplers.

2. Check all nuts and bolts for proper tightness. See Maintenance Schedule.

3. Every Brush Wolf is tested at the factory and all nuts and bolts have been tight-ened to specifications. We recommend you check them after the first 4 to 6 hours of operation and at regular intervals as defined in the Maintenance Schedule.

4. Inspect blades for damage before each use. Tighten all the nuts which secure the blades to the blade carrier every eight (8 )hours. Torque to 775 ft - lbs with a 1-11/16” socket on the Drop (3) Blade Carrier. Torque to 275 ft - lbs with a 1-1/8” on the Flat (4) Blade Carrier. The nuts are located under the access plate on the top of the blade carrier. (see Parts Diagram on Page 15 or17 item # 2).

5. Tighten the nuts on the blade carrier at the lower end of the bearing housing. Torque to 380 ft - lbs with a 15/16” socket wrench.

6. Check lubricant level weekly. Remove the bearing housing plugs. If the resevoir is full it will measure within 2” of the plug cap. Loss of fluid could be indicative of a leak. When adding oil use 80 W 90 gear lube weight - DO NOT over fill - too much lubricant will rupture the bearing housing. The bearing housing is full when the oil level is 2” from the plug cap.

CAUTION: Always replace the entire set of blades. Never weld or straighten damaged blades, as loss of blade integrity may result. CAUTION: Replace missing or illegible safety decals immediately. Decals are available at your Brush Wolf 72 M-AX dealer.



BLANK

— 12 —

Maintenance Schedule / Check List

ITEM TYPE OF MAINTENANCE FREQUENCYBlade carrier to bearing housing bolts

Torque to 380 ft - lbs for the 3 & 4 blade carri-er assemblies.

Daily or every 8 hours

Blade Bolt/nuts Torque to 775 ft - lbs for the 3 drop blades.Torque 275 ft - lbs for the 4 flat blade bolts.

Daily or every 8 hours

Blade Inspection Check for damage, dullness or cracks. Blades should rotate freely and be clear of obstruc-tions. Replace entire set of blades if damaged.

Daily or every use

Bearing Housing Remove any foreign material from shaft. Daily or every use

Bearing Housing nuts Torque to 230 ft - lbs Daily or every 8 hours

Hoses and hose safety shield Check for wear or damage. Daily or every 8 hours

Hydraulic Motor Mount Bolts Torque to 75 ft - lbs. Daily or every 8 hours

Block - High Flow Units Torque to 420 in - lbs Daily or every 8 hours

Bearing housing lubricant Check oil - add 80W90 gear lube - DO NOT over fill - The bearing housing is full when oil level is 2” below the plug cap.

Once per week

Push Guard Clean the grease fitting before lubrication. Apply grease to the pins on the guard of the 72 M-AX.

As needed

72 M-AX Unit Clean the unit to view potential damage or obstructions that could result in poor perfor-mance.

As needed

CAUTION: Perform maintenance on a level surface with the unit firmly on the ground. Shut off the hydraulic power supply and disconnect hydraulic couplers.

Do Not loan your 72 M-AX to another skid steer owner. The potential exists for hydraulic contamination and could shorten the life of your skid steer or the hydraulic motor on your 72 M-AX.


Troubleshooting

Problem Check

Loss of Power Low hydraulic fluid level Overheated hydraulic fluid* Contaminated hydraulic fluid* *May damage hydraulic motor

Excessive Dull, broken or damaged bladesUnit Vibration Blade carrier out of balance Loose nuts and bolts New blade or bolts matched with worn blade or bolts Wire or rope wrapped around blades

Leaking Oil Loose hydraulic connections Ruptured hydraulic motor seals

Note: When performing maintenance, shut down the skid steer and remove all hydraulic hoses from the power source.

— 14 —

72 M-AX STD Parts Diagram


Parts List Model 72 M-AX Standard FlowITEM ITEM QTY PART NUMBER DESCRIPTION

1 1 15204-ACCUM FRAME, 72 M-AX, WELDMENT

2 1 15206 PLATE, ACCESS, 3 HOLE, M-AX

3 1 15235 WELDMENT, PUSH GUARD, M-AX

4 1 16490 DECAL KIT, BW 72 M-AX

5 2 15587 HOSE WHIP ASSEMBLY, -12 ORFS, FEMALE SWIVEL COUPLINGS, 0.750 X 114.000 HOSE



8 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875

9 1 16242 COVER, 50MM ACCUMULATOR

10 1 16170 MOTOR, 9.9 CU IN, SAE “CC” 4 BOLT, 0.750 DIA SPLIT FLANGE STAGGERED PORTS, 14 TOOTH SPLINE*

11 1 15582 BLOCK, CROSSOVER RELIEF MANIFOLD, 6K MOTOR, 4100/500 RELIEF, STEEL

12 1 15078 COUPLER, 1/2 FEMALE, 7/8-14, O-RING BOSS

13 1 15079 COUPLER, 1/2 MALE, 7/8-14, O-RING BOSS

14 1 15118 BEARING HOUSING, #8

15 1 15119 SPRING, TORSION, PUSH GUARD, RIGHT

16 1 15120 SPRING, TORSION, PUSH GUARD, LEFT

17 2 15221 PIN, SPRING, 1.250 DIA X 6.500

18 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK

19 3 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB

20 1 15407 ADAPTER, STRAIGHT, #6 MORFS, #4 MORB


22 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS

23 2 @ 11.250 15351 EDGE TRIM, 0.375 X 0.625 LEG, DUAL TNG

24 2 16234 CLAMP, 50MM ACCUMULATOR, BOTTOM

25 2 16235 CLAMP, 50MM ACCUMULATOR, TOP

26 1 16236 ADAPTER, RUN TEE, #12 MORFS, #12 MORB, #12 MORFS

27 1 16239 ADAPTER, REDUCER, #12 ORFS, #6 ORFS

28 1 16237 ADAPTER, 90 DEG, #8 MORB, #6 MORFS

29 1 16238 ACCUMULATOR, PISTON, 50MM BORE, 4000 PSI

30 4 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC

31 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC

32 4 Hardware BOLT_HH_ DH_1_4-20X1 UNC_GRD5

33 3 Hardware BOLT, HH, FLANGED, 3/8-16 X 1, GRD 5, ZINC

34 6 Hardware NUT, NYLOCK, 3/8-16, ZINC


36 8 Hardware NUT, NYLOCK, 5/8-18,GRD 8 ZINC

37 8 Hardware SCREW_ CAP_SH_ 3_8-16X3 1_2 GRD8

38 4 Hardware WASHER_FLAT_.250 X .500 O.D.

39 6 Hardware WASHER, FLAT, 3/8, ZINC


41 4 15381 WASHER, NORD-LOCK, 0.500 X 1.000 OD, ZINC


43 4 Hardware WASHER_SPRING LOCK_.250

44 2 Hardware WIRE, SS, .032 X 3

45 2 15247 ZERK, GREASE, 1/4”-28 STRAIGHT, 0.688 LONG**For skid steers rated with Auxiliary Hydraulics of 23-29 GPM

— 16 —

72 M-AX High Flow Parts Diagram


Parts List Model 72 M-AX High FlowITEM ITEM QTY PART NUMBER DESCRIPTION

1 1 15204-ACCUM FRAME, 72 M-AX, WELDMENT

2 1 15206 PLATE, ACCESS, 3 HOLE, M-AX

3 1 15235 WELDMENT, PUSH GUARD, M-AX

4 1 15141 DECAL KIT, BW 72 M-AX




8 1 15418 PLATE, STAUFF, 3 HOLE COVER, 1.25 X 5.875

9 1 16242 COVER, 50MM ACCUMULATOR

10 1 15087 MOTOR, 11.9 CU IN, SAE “CC” 4 BOLT, 0.750 DIA SPLIT FLANGE STAGGERED PORTS, 14 TOOTH SPLINE*

11 1 15582 BLOCK, CROSSOVER RELIEF MANIFOLD, 6K MOTOR, 4100/500 RELIEF, STEEL

12 1 15114 COUPLER, 5/8 FEMALE, SIZE 16, 1 1/6-12, O-RING BOSS

13 1 15115 COUPLER, 5/8 MALE, SIZE 16, 1 1/6-12, O-RING BOSS

14 1 15118 BEARING HOUSING, #8

15 1 15119 SPRING, TORSION, PUSH GUARD, RIGHT

16 1 15120 SPRING, TORSION, PUSH GUARD, LEFT

17 2 15221 PIN, SPRING, 1.250 DIA X 6.500

18 1 15401 CLAMP, BODY, TWO PIECE, 30-30-18, THREE HOSE, BLACK

19 3 15405 ADAPTER, STRAIGHT, #12 MORF, #12 MORB



22 1 15414 COUPLER, FLAT FACED, 3/8 FEMALE, 3/4-16, O-RING BOSS

23 2 @ 11.250 15351 EDGE TRIM, 0.375 X 0.625 LEG, DUAL TNG

24 2 16234 CLAMP, 50MM ACCUMULATOR, BOTTOM

25 2 16235 CLAMP, 50MM ACCUMULATOR, TOP

26 1 16236 ADAPTER, RUN TEE, #12 MORFS, #12 MORB, #12 MORFS

27 1 16239 ADAPTER, REDUCER, #12 ORFS, #6 ORFS

28 1 16237 ADAPTER, 90 DEG, #8 MORB, #6 MORFS

29 1 16238 ACCUMULATOR, PISTON, 50MM BORE, 4000 PSI

30 4 Hardware BOLT, HH, 1/2-13 X 2 UNC, GRD 5, ZINC

31 2 Hardware BOLT, HH, 3/8-16 X 3, GRD 5, ZINC

32 4 Hardware BOLT_HH_ DH_1_4-20X1 UNC_GRD5

33 3 Hardware BOLT, HH, FLANGED, 3/8-16 X 1, GRD 5, ZINC



36 8 Hardware NUT, NYLOCK, 5/8-18,GRD 8 ZINC

37 8 Hardware SCREW_ CAP_SH_ 3_8-16X3 1_2 GRD8

38 4 Hardware WASHER_FLAT_.250 X .500 O.D.





43 4 Hardware WASHER_SPRING LOCK_.250

44 2 Hardware WIRE, SS, .032 X 3

45 2 15247 ZERK, GREASE, 1/4”-28 STRAIGHT, 0.688 LONG*For skid steers rated with Auxiliary Hydraulics of 30-40 GPM

— 18 —

DROP BLADE CARRIER ASSEMBLY ITEM ITEM QTY PART NUMBER DESCRIPTION

1 1 15095 WELDMENT, BLADE CARRIER, 47.000 DIA X 1.000 PLATE, M-AX

2 3 15272 SET OF 3 BLADES, 18.000 X 5.000 X 0.625

3 3 15101 BOLT, D-BOLT, 1 1/8-12, M-AX

4 3 15148 NUT, TOP LOCK, 1 1/8-12, GRADE C, PLAIN5 8 Hardware BOLT HH 3/4-10X2 UNC GRD8

6 3 Hardware WASHER, FLAT, 1 1/8, F436, ZINC

Standard Blade Assembly

Drop Blade Assembly - 3 blades

Parts List


Standard Blade Assembly

Drop Blade Maintenance - 3 blades1. Perform maintenance on level surface with the 72 M-AX blocked off the ground. Shut off the hy-

draulic power supply and disconnect hydraulic couplers. 2. Tighten bolts of blades every use or every eight hours. Inspect blades.3. Damaged, bent or dull blades should be replaced immediately. Replace all three blades, and

hardware at the same time. Follow the instructions below.

To Replace Blades:

1. Perform replacement on level surface with the 72 M-AX blocked off the ground. Shut off the hy-draulic power supply and disconnect hydraulic couplers.

2. Remove nuts and washers from plate on the cutter deck to expose access hole. For location of access hole - reference item #2 on the Parts drawing of the 72 M-AX on either page 15 or 17.

3. Through the exposed access hole rotate the blade carrier to line up the nut of the blade for ac-cess.

4. Insert a 1-11/16”socket through the access hole and remove the nut and drop the bolts.

5. Remove blades and pucks horizontally from the brush cutter.

6. Clean new bolts, lock-nuts and washer with cleaner/degreaser. Prior to assembly, ensure all hardware is dry and free of any contaminents including the carrier assembly.

7. Use Primer Loctite on the bolts and nuts according to directions on the label.

8. Apply Loctite #243 to the first 10 bolt threads to ensure coverage.

9. Assemble the new blade, the bolt, washers, and the nut to the carrier. The blade carrier cuts in one direction - counter clockwise.

10. Torque the blade bolts to 775 ft/lbs using a 1-11/16” socket.

11. Confirm the blade carrier rotates freely and is clear of any obstructions.

12. Install the plate to the access hole on the top of the 72 M-AX.

— 20 —

FLAT BLADE CARRIER ASSEMBLY ITEM ITEM QTY PART NUMBER DESCRIPTION

1 1 16200 ASSEMBLY, BLADE CARRIER, M-AX, FLAT DISCS2 1 15273 SET OF 4 BLADES, FLAT, 18.000 X 8.500 X 0.6253 4 15099 PUCK, 3.500 DIA X 0.750, 3 HOLE

4 12 16148 WASHER, NORD-LOCK, 0.750 X 1.540 OD, ZINC5 8 Hardware BOLT, HH, 3/4-10 X 5, GRD 8, ZINC6 12 16149 BOLT, HH, 3/4-16 X 3, GRD 8 LONG SHOULDER7 8 Hardware WASHER, FLAT, 3/4, F436, ZINC8 12 16150 NUT TOPLOCK 3/4-16 GRD 8, ZINC

Optional Blade Assembly

Flat Blade Assembly - 4 blades

Parts List


Optional Blade Assembly

Flat Blade Replacement - 4 blades1. Perform maintenance on a level surface with the unit blocked off the ground. Shut off the hydrau-

lic power supply and disconnect hydraulic couplers. 2. Tighten blades bolts every use or every eight hours, and inspect blades for damage.3. The Flat blades are a reversible cutting edge - just turn over the blade - all four (4) blades must

be turned over at the same time. When blades are replaced an entire new set of four (4) blades, pucks, bolts and washers must be replaced at the same time. Follow the instructions below.

To Replace Blades:

1. Remove nuts and washers from plate on the cutter deck to expose access hole. For location of ac-cess hole - reference item #2 on the Parts drawing of the 72 M-AX on page 15 or 17.

2. Through the exposed access hole rotate the blade carrier to line up the nut of the blade for access.

3. Insert a 1-1/8”socket through the access hole and remove 3 nuts for each blade.

4. Pound out the bolt using a drift pin or center punch to prevent damaging the threads.

5. Slide puck and blade out.

6. Clean blades, pucks, bolts, locknuts and washer with cleaner/degreaser. Prior to assembly, ensure all hardware is dry and free of any contaminents including the carrier assembly.

7. Insert the new puck and blade between carrier assembly. Line up with the bolt holes. Note: If the reverse side of the blades have not been used - turn the blade over. All four blades must be turned over at the same time. The blade carrier cuts in one direction - counter clockwise. Worn or dam-aged pucks, bolts, and washers must be replaced in sets.

8. Apply Loctite #243 to first ten bolt threads to ensure coverage.

9. Assemble the bolt, washer, and the nut to the carrier as shown on the opposite page.

10. Torque the blade bolts to 275 ft/lbs.

11. Confirm the blade carrier rotates freely and is clear of any obstructions.

12. Install the plate of the access hole on the top of the 72 M-AX.

— 22 —

Dealer Instructions / Purchaser

Checklist

The checklist below is important information for the Dealer to review with the Purchaser.

Mail, email, or fax a copy to:

Cross-Tech Manufacturing, Inc.33877 Gendreau RoadCrosslake, MN 56442-9303email: [email protected]

Also available to fill out on-line: www.brushwolf.com

Explain and alert buyer of High Flow motor and case drain.

No auxiliary hydraulics over 40 Gallons Per Minute (GPM).

Explain and demonstrate operation of Brush Wolf 72 M-AX.

Explain use and demonstrate use of Cab Safety Door. Explain and demonstrate bearing housing/lube level check.

Explain and demonstrate inspection points and frequency; including nuts, bolts, blades, hoses, etc. Review the Owner/Operator Manual Safety Instructions.

Alert buyer not to remove safety devices or decals.

Advise buyer that all safety decals are available upon request.

SAFETY OPERATIONS CHECKLIST

Dealer Information

Dealer Company Name

Technician Name

City State/Province/ Region


Warranty Registration FormThank you for choosing Brush Wolf. Please complete the form below to register your Brush Wolf prod-uct. There is a form available to fill out on-line at www.brushwolf.com. Please complete the Warranty Registration form within 30 days of purchase date to qualify for warranty.

Purchaser Information

Company

Contact Name

Phone

Email

Address 1

Address 2

City State/Province/Region

Zip/Postal Code Country

Model Number: Serial Number:

Date of purchase MM DD YYYY

Would you recommend this product to your friends? Yes NoCondition of the product? Excellent Good Fair Poor

Cross-Tech Manufacturing, Inc.33877 Gendreau RoadCrosslake, MN 56442-9303email: [email protected] available to fill out on-line: www.brushwolf.com

— 24 —

WARRANTY INFORMATION:

The Warranty Claim Form must be completed in full detail and received in good condition. Cross-Tech Manufacturing, Inc. limits it warranty to the hydraulic motor, gearbox, bearing housing and cylinders for a period of one (1) year from the original date of sale. A two (2) year warranty is included on the struc-tural steel from the date of sale.

A Warranty Registration Form for this equipment must exist before warranty claims will be valid. If a de-fect in a Cross-Tech Manufacturing product is discovered during the applicable warranty period, Cross-Tech will repair or replace, at its option the motor, gearbox or defective part. Cross-Tech Manufacturing, Inc. purchased components are subject to the original manufacturer’s warranty.

The Equipment owner is responsible for proper maintenance. If the product is not maintained, all war-ranties by Cross-Tech Manufacturing will be null and void. Any modification to the product other than those made by Cross-Tech Manufacturing will cause this warranty to be void; including any modification or disassembly of motors, gearbox, bearing housing, cylinders, etc.

This warranty does not extend to repairs, adjustments, or replacement of a Cross-Tech product or part that results from misuse, negligence, alteration, modification tampering, improper maintenance or improper operation of the product. Claims submitted must be legible and in good condition. Cross-Tech does not cover service mileage, downtime or replacement of the attachment.

If a problem arises during the warranty period please contact your local dealer. The warranty is null and void if the product is modified or repaired without written consent from Cross-Tech Manufactur-ing. Cross-Tech units used in rental fleets are covered with a ninety (90) day warranty on the hydraulic motor, gearbox, bearing housing, cylinders and structural steel with a valid warranty registration on file within thirty (30) days of the purchase date.

To file a warranty claim, please contact your dealer or Cross-Tech Manufacturing.

Copyright ©2015 Cross-Tech Manufacturing, Inc. rev 11142017F All rights reserved.

Cross-Tech Manufacturing, Inc. 33877 Gendreau RoadCrosslake, MN 56442218-692-1050www.brushwolf.com

72 M-AX Extreme Duty - Brush Cutters for Skid …...Skid Steer Auxiliary Hydraulic Flow: The 72 M-AX Extreme Duty is only to be used on a skid steer with auxiliary hydraulic flow rated

Documents