70-432

Microsoft 70-432

70-432 TS: Microsoft SQL Server 2008 ,

Implementation and Maintenance

Practice TestVersion 10.3

Actu

alTe

sts.

com

QUESTION NO: 1

You work as the network administrator at CertKiller.com. CertKiller.com has acquired an

enterprise application that runs SQL Server 2008. The stored procedures that the application uses

make use of the EXECUTE AS clause that makes use of the Microsoft Windows accounts.

A new CertKiller.com security policy requires that all enterprise applications must run under the

context of a service account. It is imperative that this account complies with the company policy

that states all accounts must have the least amount of privileges whilst allowing duties to be

carried out. Consequently this service account must have as little privileges as possible. You have

received instructions to configure the SQL Server service to be used in a suitable context for the

installation of the new enterprise application.

What should you do?

A. You should consider running the SQL Server service under the domain user account.

B. You should consider running the SQL Server service under the local system account.

C. You should consider running the SQL Server service under the local Administrator account.

D. You should consider running the SQL Server service under the local service account.

Answer: A

QUESTION NO: 2

You work as a database administrator at CertKiller.com. CertKiller.com is using a SQL Server

2008 instance. The SQL Server 2008 instance contains a database named CK_DB. CK_DB has

its data file and the transaction log file on drive D. You have received instructions to move both the

data file and the transaction log file to drive G.

What should you do?

A. You should consider adding the following Transact-SQL statement:

ALTER DATABASE CK_DB SET RESTRICTED_USER WITH ROLLBACK_IMMEDIATE;

B. You should consider moving the data file and use the following Transact-SQL statement:

ALTER DATABASE CK_DB MODIFY FILE(NAME = CK_DB_Data, FILENAME = mdf');

ALTER DATABASE CK_DB SET MULTI_USER;

C. You should consider adding the following Transact-SQL statement:

ALTER DATABASE CK_DB SET OFFLINE WITH ROLLBACK_IMMEDIATE;

ALTER DATABASE CK_DB mdf';

ALTER DATABASE CK_DB SET ONLINE;

D. You should consider moving the data file and then start the SQL Server service with the

following Transact-SQL statement:

IEXEC sp_attach_single_file_db @dbname = N' CK_DB ',@physname = N'v:\SQLServer\

Microsoft 70-432: Practice Exam

"Pass Any Exam. Any Time." - www.actualtests.com 2

Actu

alTe

sts.

com

CK_DB_Data.mdf';

E. You should consider moving the data file and transaction log file and then start the SQL Server

service with the following Transact-SQL statement:

EXEC sp_attach_db @dbname = N' CK_DB ',@filename1 = N'G:\SQLServer\

CK_DB_Data.mdf',@filename2 = ldf';

F. You should consider moving the data file and transaction log file and then start the SQL Server

service with the following Transact-SQL statement:

EXEC sp_attach_db @dbname = N' CK_DB ',@filename1 = N'G:\SQLServer\

CK_DB_Data.mdf',@filename2 = N 'g:\SQLServer \CK_DB_log.ldf';

Answer: F

Explanation:

Incorrect answer:

"You should consider moving the data file and then start the SQL Server service with the following

Transact-SQL statement: IEXEC sp_attach_single_file_db @ dbname = N' CK_DB ',@ physname

= N'v :\ SQLServer \ CK_DB_Data.mdf';"

If you take a look at this, you are only attaching a single file, in this case the data file(. mdf ) and

from the'v:' Drive. So with this answer, we did not fulfill the requirements of moving both data and

log from g:'.

Part 2, Configure SQL Server instances. (4 questions)

QUESTION NO: 3


2008 instance. Management wants the prefix usp_ on all instances using all user-defined stored

procedures; however, they do not want you to develop stored procedures which do not include this

prefix.

What should you do?

A. You should consider using a method that will point to the stored procedure which is evaluated

on demand.

B. You should consider using a method that will point to the stored procedure which is evaluated

on change.

C. You should consider using a method where the condition targets point to the stored procedure

which is evaluated on demand.

D. You should consider using a method where the policy targets point to the stored procedure

which is evaluated on demand.

Answer: B



Actu

alTe

sts.

com

QUESTION NO: 4


2008 instance. You have received instructions from management to allow the users at

CertKiller.com on the SQL Server sample to use the OPENROWSET() function to search remote

information sources.

What should you do?

A. You should consider configuring the Transaction Logs for sp_configure configuration.

B. You should consider configuring the Ad Hoc Distributed Queries for sp_configure configuration.

C. You should consider configuring the router control for sp_configure configuration.

D. You should consider configuring the Ad Lib Distributed Queries for sp_configure configuration.

Answer: B

QUESTION NO: 5


2008 instance. Because of a new application, you installed a second SQL Server 2008 instance

that will work with the new application. However, these two instances should be functional with

their respective applications without changing the environment of the application and with the

minimal amount of cost.

What should you do? (Each correct answer presents part of the solution. Choose TWO.)

A. You should consider changing the SQL Server 2000 application to use SQL Server 2008.

B. You should consider installing the new SQL Server 2008 as a named instance.

C. You should consider changing the SQL Server 2000 instance to a SQL Server 2008 instance.

D. You should consider setting set the new application to use the new instance.

E. You should consider modifying the SQL Server 2008 to run as the default instance.

Answer: B,D

QUESTION NO: 6


2008 instance. You have received instruction from management to move a web application from

Microsoft SQL Server 2005 to Microsoft SQL Server 2008. Be reminded that when a web

application is moved then the features will be stopped and you need to control the SQL Server



Actu

alTe

sts.

com

sample to remember the use of features.

What should you do?

A. You should consider using a SQL server-side trace which gets the Deprecation Announcement

and Deprecation Final Support event classes.

B. You should consider using a store procedure which gets the Deprecation Announcement and

Deprecation Final Support event classes.

C. You should consider using Transaction Log.

D. You should consider using a SQL Server Profiler which gets the Deprecation Announcement

and Deprecation Final Support event classes.

Answer: A

Explanation:

Part 3, Configure SQL Server services. (1 question)

QUESTION NO: 7


2008 instance. The SQL Server 2008 instance contains a database named CK_DB. Management

wants CK_DB to have the following characteristics.

* I/O streaming access should be enabled on CK_DB.

* The data on CK_DB should be accessible to remote clients.

* Ensure that CK_DB is enabled.

What should you do?

A. You should consider configuring the IIS Service.

B. You should consider configuring the SQL Server service.

C. You should consider configuring the SQL Server VSS Writer.

D. You should consider configuring the Web Service.

Answer: B

Explanation:

Part 4, Configure additional SQL Server components. (5 questions)

QUESTION NO: 8

You work as a database administrator at CertKiller.com. CertKiller.com is using SQL Server 2008.

CertKiller.com contains a SQL Server 2008 server named CERTKILLER-DB04. CERTKILLER-

DB04 will be used to run the Reporting Services. However, the Reporting Services must be able to



Actu

alTe

sts.

com

run the database backups and other maintenance job automatically. Because CertKiller.com has

no other SQL systems, you need to make use of the SQL's DNS name.

What should you do?

A. You should consider using the SQL Server Web Service and the Microsoft Distributed

Transaction Coordinator technology.

B. You should consider using the SQL Server Browser and the SQL Server Web Service

technology.

C. You should consider using the Microsoft Distributed Transaction Coordinator and the SQL

Server Browser technology.

D. You should consider using the Internet Information Services and the Microsoft Distributed

Transaction Coordinator technology.

Answer: C

QUESTION NO: 9


2008 database that makes use of the Analysis Services and Reporting Services. However,

installed components at CertKiller.com adhere to the CertKiller.com security policy. You have

received instruction to ensure that you adhere to the CertKiller.com security policy.

What should you do?

A. You should consider changing the configuration of the SQL Server Best Practices Analyzer

(BPA) and assign the least amount of privilege.

B. You should consider changing the Default Resource Pool configuration file and run it again.

C. You should consider developing a Transact-SQL script based on the sp_configure stored

procedure.

D. You should consider developing policies based on the security policy before applying the

policies against a server group which contains the database servers which need to be set.

Answer: D

QUESTION NO: 10


2008 instance. You have received instructions to publish an instance of SQL Server Reporting

Services (SSRS) that will keep the old information to the same machine, and as default as

possible.



Actu

alTe

sts.

com

What should you do?

A. You should consider using the Internet Information Services default Web site and update the

SSRS instance.

B. You should consider using the Single mode and update the SSRS database.

C. You should consider using the http.sys listener and install the SSRS instance.

D. You should consider using the SharePoint integrated mode and update the SSRS database.

Answer: D

QUESTION NO: 11


2008 instance that contains a database named CK_Prod. CertKiller.com is using Microsoft SQL

Server 2005 Analysis Services (SSAS) that is accessed by an Internet Information Services

application by using anonymous access. However, management wants the SSAS sample to be

processed by the application.

What should you do?

A. You should consider increasing a new Microsoft SQL Server 2005 Analysis Services (SSAS) to

the Security\ RequireClientAuthentication server configuration.

B. You should consider setting the Security\RequireServerAuthentication server configuration to

False.

C. You should consider setting the Security\RequireClientAuthentication server configuration to

False.

D. You should consider setting the Security\RequireServerAuthentication server configuration to

Default value.

Answer: C

QUESTION NO: 12


2000 instance that contains a database named CK_DB1. One day you installed a SQL Server

2008 instance for business. Management wants you to ensure that the third-party applications can

run on both database instances with the minimum amount of administrative effort.

What should you do?

A. You should consider updating the SQL Server 2000 instance application to use the SQL Server

2008 instance.



Actu

alTe

sts.

com

B. You should consider installing SQL Server 2008 as a named instance and set the new

application to utilize the new instance.

C. You should consider installing SQL Server 2008 as a default instance and set the new

application to utilize the new instance.

D. You should consider updating the SQL Server 2000 application to use the SQL Server 2008.

Answer: B

Explanation:

Part 5, Implement database mail. (1 question)

QUESTION NO: 13


2008 instance. You are busy with the setting of the Database Mail profile. You want the Database

Mail profile to send reports to all of the users at CertKiller.com. You then use the sp_send_dbmail

stored procedure to send reports during office hours. However, this method will take its time to

send delivery reports to management. Furthermore, management wants the reports as soon as

possible.

What should you do?

A. You should consider changing the SMTP configurations.

B. You should consider increasing another SMTP account for the delivery reports.

C. You should consider setting a new Database Mail profile that will be used for the delivery

reports to management.

D. You should consider changing the Database Mail system configurations.

Answer: C

Explanation:

Part 6, Configure full-text indexing. (2 questions)

QUESTION NO: 14


2008 instance. The SQL Server 2008 instance contains a database named CK_Prod which make

use of the Fulltext indexes. However, some of the records have the word 'root' in CK_Prod. This

causes the Fulltext index, when searching for the root word, an empty resultset. You need to

include 'root' in the query that returned.

What should you do?



Actu

alTe

sts.

com

A. You should consider adding a full-text index.

B. You should consider changing a full-text index.

C. You should consider rebooting the MSFTESQL services.

D. You should consider reproducing the full-text index.

Answer: D

QUESTION NO: 15


2008 instance that contains a database named CK_Prod that has a table named CK_Tbl that

keeps data about the entire catalogue of products. The users at CertKiller.com search CK_Tbl

which is based on the TestPro column. The TestPro column owns the NULL value for the entire

catalogue except products such as Televisions. However, there is no index on the TestPro column

presently. You have received instructions from management to ensure that queries are performed

more efficiently while minimizing the effect your solution will have on the disk space.

What should you do?

A. You should consider developing a unique index on the TestPro column.

B. You should consider developing a default index on the TestPro column.

C. You should consider developing an un-cluttered index on the TestPro column.

D. You should consider developing a filtered index on the TestPro column.

Answer: D

QUESTION NO: 16

You work as a database administrator at CertKiller.com. The CertKiller.com network contains a

SQL Server 2008 computer named CERTKILLER-DB01. CERTKILLER-DB01 needs the SQL

Server service and the SQL Server Agent service to start automatically. Besides that, it should

also audit all user names and application names that access the system. Auditing should be on

always and the result should be there for about a decade.

What should you do? (Choose TWO.)

A. You should consider setting the authentication mode to SQL Server and Windows

Authentication mode.

B. You should consider create a SQL Server Agent job for the SQL Trace stored procedure.

C. You should consider disabling the C2 Audit Tracing setting.

D. You should consider configuring the job to start when the SQL Server Agent service starts.



Actu

alTe

sts.

com

E. You should consider setting the Login auditing to log all logins as events.

Answer: B,D

QUESTION NO: 17


2008 instance. The SQL Server 2008 instance hosts quite a few applications. Furthermore, the

SerTest\Test account is used by the SQL Server Agent service. CertKiller.com also uses a file that

can be stored to a log server, by using a job named CK_MTest. However, CK_MTest cannot

access the log server as it should. You then decide to set the service of SQL Server Agent. You

need to ensure that the settings of the SQL Server Agent service can access the entire log server.

What should you do?

A. You should consider using the Remote Service account.

B. You should consider using the Domain service account.

C. You should consider using the Local Service account.

D. You should consider using the Domain account.

Answer: D

QUESTION NO: 18


2008 instance. The SQL Server 2008 instance contains SQL Server Agent jobs. These SQL

Server Agent jobs uses ten shared schedules that is used 24/7. You have received instructions to

ensure that a job named CK_Tst does not execute on Sundays.

What should you do?

A. You should consider deleting the schedule from CK_Tst for Sundays.

B. You should consider creating another Tester schedule for CK_Tst for Sundays.

C. You should consider deleting all the scheduled tasks for Sundays.

D. You should consider creating a separate schedule for Sundays.

Answer: A

QUESTION NO: 19


2008 instance. You want the tasks in the database to have the following characteristics:



Actu

alTe

sts.

com

* Examining database integrity.

* Reproducing indexes.

* Stores a report to a text file.

You have received instructions to ensure that you could change the SQL Server instance in such a

way that an e-mail notification is sent to the developers when the maintenance plan could not run

normally.

What should you do?

A. You should consider disabling a fail-safe operator for the SQL Server Agent.

B. You should consider modifying the SQL Server Agent job so that it runs the database

maintenance plan to send e-mail notifications to the developers.

C. You should consider modifying the database maintenance plan to contain a Notify Operator

task that will e-mail the proper developers.

D. You should consider enabling a fail-safe operator for the SQL Server Agent.

Answer: B,D

Explanation:


2008 instance. CertKiller.com contains two SQL Server 2008 servers named CERTKILLER-DB1

and CERTKILLER-DB2. CERTKILLER-DB1 does the transaction log backups and CERTKILLER-

DB2 is to reset by using the SQL Server Surface Area Configuration. However one morning you

notice that the CERTKILLER-DB2 did not run the maintenance tasks automatically.

What should you do?

A. You should consider resetting a full backup of the master database manually.

B. You should consider resetting the Web service to only grant access to an administrator.

C. You should consider resetting CERTKILLER-DB1 to use Windows Integrated authentication

exclusively.

D. You should consider resetting CERTKILLER-DB2 so that the SQL Server Agent service starts

automatically.

QUESTION NO: 20


2008 instance. The SQL Server 2008 instance has a stored procedure which runs a database

maintenance process. You were instructed to develop a SQL Server Agent job which implements

the stored procedure; however it should delete the job when it is finished.



Actu

alTe

sts.

com

What should you do?

A. You should consider developing an Alert that will be raised when the job completes.

In addition you should also set the alert to call another job when activated.

B. You should consider developing a Transactions Log to run twice on a schedule.

C. You should consider developing a job that uses the automatically remove job option.

D. You should consider developing a job which belongs to the Database Maintenance category.

Answer: C

Explanation:

Part 2, Manage SQL Server Agent alerts. (0 questions) Part 3, Manage SQL Server Agent

operators. (1 question)

QUESTION NO: 21


2008 instance. CertKiller.com contains a SQL Agent job that runs every 5 minutes. CertKiller.com

also has a text file called CK_Tst.log on F: drive that logs all the information of the job. One

morning during monitoring you notice the following:

* The SQL Server Agent job does not function

* The SQL Server Agent service does not execute.

You need to make sure why the SQL Server Agent service got lost.

What should you do?

A. You should consider checking the TRANSACTION log.

B. You should consider checking the SQLAGENT.OUT log.

C. You should consider checking the ERRORLOG log.

D. You should consider checking the VIEWDELETE log.

Answer: B

Explanation:

Part 4, Implement the declarative management framework (DMF). (1 question)

QUESTION NO: 22


2008 instance that has a table named CK_StockOnHand. CK_StockOnHand contains a column

named CK_Price. A new CertKiller.com policy states that the value in CK_Price cannot be

decreased by more than 10 percent in any single database operation. However, ad hoc queries

and various other methods are used to update CK_Price. You need to make sure that the



Actu

alTe

sts.

com

CertKiller.com policy is being complied with.

What should you do?

A. You should consider developing a trigger which rolls back non-CertKiller.com policy compliant

changes to CK_Price.

B. You should consider developing a view which rolls back non-CertKiller.com policy compliant

changes to CK_Price.

C. You should consider developing a stored procedure which rolls back non-CertKiller.com policy

compliant changes to CK_Price.

D. You should consider developing a primary key constraint to a table which only contains valid

prices on CK_Price.

Answer: A

Explanation:

Part 5, Back up a SQL Server environment. (1 question)

QUESTION NO: 23


2008 instance. CertKiller.com contains a SQL Server 2008 server named CERTKILLER-DB1.

There are also SQL Server Agent jobs on the server. Furthermore the database is backed up at a

daily basis. One morning, the master database on CERTKILLER-DB2 went down. You then

restore and rebuild the database. The CertKiller.com managers want CERTKILLER-DB1 to work

as it was in the past.

What should you do?

A. You should consider rebuilding the entire SQL Server Web Service for the database.

B. You should consider reserving the model and master databases for the database.

C. You should consider reserving all the Transaction Logs for the database.

D. You should consider starting from scratch and rebuilding the database of all users' memories.

Answer: B

QUESTION NO: 24

You work as a database administrator at CertKiller.com. CertKiller.com is using two SQL Server

2008 sample named CKSmp1 and CKSmp2. Furthermore, CKSmp1 contains a database named

CK_DB. A CertKiller.com user named Mia Hamm uses her name Mia to log on to the database on

CKSmp1. During the week you have transferred CK_DB to CKSmp2 with Mia Hamm credentials.



Actu

alTe

sts.

com

However, when she tries to login on CK_DB at CKSmp2, she received an error message stating

that she is not allowed access. Mia Hamm needs to access CK_DB and you need to make it

happen.

What should you do?

A. You should consider using CK_DB and ALTER LOGIN Mia WITH DEFAULT_DATABASE =

CK_DB;

B. You should consider using CK_DB and ALTER LOGIN Mia WITH PASSWORD = 'Re#99$45'

UNLOCK;

C. You should consider the following: USE CK_DB and ALTER LOGIN Mia ENABLE.

D. You should consider using CK_DB and change USER Mia WITH LOGIN = Mia;

Answer: D

QUESTION NO: 25


2008 instance. The a SQL Server 2008 instance is used on a Windows Server 2000 server and

uses the mixed authentication mode. Management wants you to ensure the following:

* SQL Server 2008 authenticated logins has the same password complexity rules which are

enforced by Windows Server 2000.

* Full compliance of all users with regarding to adhering to the password complexity rules.

What should you do? (Choose TWO)

A. You should consider using the ALTER LOGIN ... CHECK_EXPIRATION = OFF statement to

change the entire login of all users.

B. You should consider using the ALTER LOGIN ... CHECK_POLICY = ON statement to change

the entire login of all users.

C. You should consider using the ALTER LOGIN ... CHECK_POLICY = OFF statement to change

the entire login of all users.

D. You should consider developing an SQL Server Agent job which implements to raise an alert, if

triggered by a violation by any user.

Answer: B,D

Explanation:

Part 2, Manage users and database roles . (2 questions)

QUESTION NO: 26



Actu

alTe

sts.

com


2008 instance. The SQL Server 2008 instance contains a database named CK_DB that contains a

table named CK_Tbl. CK_DB also contains a stored procedure named CK_Prod that uses a

sp_executesql Transact-SQL statement to get data from CK_Tbl.

A new CertKiller.com security policy does not allow users to access tables directly in any

database. If it does happened that a user runs ProcedureTest"Msg 229, Level 14, State 5, Line 1,

it will give the following error.

The SELECT permission was denied on the object ' CK_Tbl', database ' CK_DB ', schema 'dbo'."

You need to ensure that the users can run CK_Prod and still comply with the CertKiller.com

security policy.

What should you do?

A. You should consider modifying CK_Prod and increase the WITH EXECUTE AS OWNER option

to its header.

B. You should consider modifying CK_Prod and the WITH EXECUTE AS OWNER option to its

header.

C. You should consider running, GRANT SELECT ON dbo.Master'TO Clerk.

D. You should consider running, GRANT SELECT ON dbo.CK_Tbl'TO Clerk.

Answer: A

QUESTION NO: 27


2008 instance that contains a database named CK_DB. During your leave, you have given a

CertKiller.com user named Mia Hamm permission to keep the database snapshots. You need to

make sure that Mia Hamm has the appropriate rights assigned to remove database snapshots.

What should you do?

A. You should allow Mia Hamm to use UPDATE.

B. You should allow Mia Hamm to use DROP DATABASE.

C. You should allow Mia Hamm to use INSERT ANY DATASPACE.

D. You should allow Mia Hamm to use RECREATE.

Answer: B

Explanation:

Part 3, Manage SQL Server instance permissions. (3 questions)



Actu

alTe

sts.

com

QUESTION NO: 28


2008 instance. The SQL Server 2008 instance contains a database named CK_Tester that is used

by the CertKiller.com's developers. You need to allow the developers to access the SQL Server

Profiler to get traces which can be used to troubleshoot the application that CK_Test uses.

What should you do?

A. You should consider making use of Transaction Logs to grant login access to the developers.

B. You should consider giving suitable server-level rights to the whole SQL Server to grant login

access to the developers.

C. You should consider converting the database roles of the developers to a fixed database role.

D. You should consider giving suitable server-level rights to the default SQL Server grant login

access to the developers.

Answer: B

QUESTION NO: 29


2008 instance. You have received instructions from management to configure the following:

* The required permission for Clerk and other users at CertKiller.com.

You need to complete this task with the least amount of SQL administrative statements.

What should you do?

A. You should consider adding the following:

CREATE ROLE Developers;EXEC sp_addrolemember 'sp_dbdatareader', 'Developers';

EXEC sp_addrolemember 'sp_dbddladmin', 'Developers';

EXEC sp_addrolemember 'Developers', ' Clerk';

B. You should consider adding the following:

DROP ROLE Developers;GRANT VIEW DEFINITION TO Developers;

GRANT SELECT TO Developers;

EXEC sp_addrolemember 'Developers', 'Clerk ';

C. You should consider adding the following:

CREATE ROLE Developers;

GRANT VIEW DEFINITION TO Developers;

GRANT SELECT TO Developers;

EXEC sp_addrolemember 'Developers', 'Clerk ';



Actu

alTe

sts.

com

D. You should consider adding the following:

GRANT VIEW ANY DEFINITION TO 'Clerk;

EXEC sp_addrolemember 'db_datareader', 'Clerk ';

Answer: C

QUESTION NO: 30


2008 instance. A new CertKiller.com security policy requires allows members of a Windows group

name CK_Prod to build new links to the SQL Server instance that should occurs between the

business hours of 10:00 and 22:00. Furthermore, the other CertKiller.com users are not allowed to

connect the database at any time. At the bottom the Transact-SQL statements:

CREATE TABLE Security.RestrictedTester(

ProductID int NOT NULL IDENTITY(1,1),

GroupTest sysname NOT NULL,

RestrictedTesterTimeStart time NOT NULL,

RestrictedTesterTimeStop time NOT NULL,CONSTRAINT RestrictedTester _pk PRIMARY KEY

CLUSTERED(Id));

INSERT INTO Security.RestrictedTester

(GroupTest,RestrictedTesterTimeStart,RestrictedTesterTimeStop)VALUES (' CK_Prod

',CAST('10:00' AS time),CAST('22:00' AS time));

You have received instructions from management to run the new CertKiller.com security policy

which is reserved in the RestrictedTester table.

What should you do?

A. You should consider developing a Microsoft SQL Server 2005 Reporting Services (SSRS) that

will result in the SQL Server Windows service to stop during non-business hours.

B. You should consider developing a SQL Server Agent job that will result in the SQL Server

Windows service to stop during non-business hours.

C. You should consider developing a logon trigger which could not permit the connection to

CK_Prod during non-business hours.

D. You should consider developing a Microsoft SQL Server 2005 Integration Services (SSIS) that

will result in the SQL Server Windows service to stop during non-business hours.

Answer: C



Actu

alTe

sts.

com

Explanation:

Part 4, Manage database permissions. (1 question)

QUESTION NO: 31


2008 instance that contains a database named CK_Prod. CertKiller.com has a SQL Server login

named CK_Tst that maps to a CertKiller.com learner administrator named CK_ProdApp in

CK_Prod. You have received instruction from management that the CertKiller.com user can to do

the following:

* That the entire stored procedures which at present exist in CK_Prod can be run.

* That the entire stored procedures will be developed in CK_Prod can be run.

What should you do?

A. You should consider allowing the proper database-level rights to default database.

B. You should consider allowing the proper database-level rights to CK_Tst.

C. You should consider allowing the proper database-level rights to CK_ProdApp.

D. You should consider increasing a new role in the default domain group.

Answer: C

Explanation:

Part 5, Manage schema permissions and object permissions. (2 questions)

QUESTION NO: 32


2008 instance that contains a database named CK_DB. CK_DB contains a table named CK_Prod

where the Sales Product resides. You have received instruction to move CK_Prod' test to a new

schema named CK_Tester. You need to complete this task using the appropriate Transact-SQL

statement.

What should you do?


ALTER TABLE Products. Test SWITCH TO CK_Tester.Table1;


ALTER AUTHORIZATION ON Products. Test TO CK_Tester;


ALTER USER Products WITH DEFAULT_SCHEMA = CK_Tester;



Actu

alTe

sts.

com


ALTER SCHEMA CK_Tester TRANSFER Products. Test

Answer: D

QUESTION NO: 33


2008 instance that contains a database named CK_Prod. CertKiller.com also has a Windows

group named CertKiller\Managers that makes use of CK_Prod. Some of the users in that group

are members for the db_owner role. However, one member in the CertKiller\Managers group

named Mia is not allowed to access the SQL Server instance. You have received instructions from

the CEO to make sure that the Mia does not access the instance. You need to complete this task

using the appropriate Transact-SQL statement.

What should you do?

A. You should consider using the following:

EXEC dbo.sp_droprolemember 'db_master', "CertKiller\Mia";

B. You should consider using the following:

DROP LOGIN "CertKiller\Mia";

C. You should consider using the following:

CREATE LOGIN "Mia\Mia" FROM Windows;DENY CONNECT SQL TO " Mia\Mia ";

D. You should consider using the following:

REMOVE LOGIN "CertKiller\Mia";

Answer: C

Explanation:

Part 6, Audit SQL Server instances. (3 questions)

QUESTION NO: 34

You work as a database administrator at CertKiller.com. CertKiller.com have 12 retail stores, each

store is equipped with their own SQL Server 2008 computer.

A database table named CK-Sales is used to store point-of-sale transactions. Furthermore, CK-

Sales also hosts sales information from all 12 of the CertKiller.com stores to accommodate

customer returns of products. Consequently the data should be refreshed from the main office to

all 12 retail stores every hour, on the hour. To this end you make use of a trigger called

trg_Coupon to produce sales coupons based on customer sales and buying patterns. Currently

replication between the server in each of the 12 retail stores and a middle server in the main office



Actu

alTe

sts.

com

occurs in real time. You should receive instruction to eliminate this replication.


A. You should consider using multiple merge publications, one at every store and one in the main

office.

B. You should consider using transactions log between all the servers in the CertKiller.com

domain

C. You should consider using snapshot replication.

D. You should consider using merge replication.

E. You should consider setting the trg_Coupon trigger on the server in each retail store to use the

NOT FOR REPLICATION option.

F. You should consider setting the trg_Coupon trigger on the server in each retail store to use the

NOT FOR REPLICATION option.

Answer: D,E

QUESTION NO: 35


2008 instance. CertKiller.com contains a SQL Agent job that contains a Windows PowerShell job

step that uses the SQLCmd function to move data between servers. You need to ensure that an

operator named TestTeam is notified through an e-mail message if the job is lost while being

moved between servers.


A. You should consider adding a stored procedure to develop the TestTeam operator.

B. You should consider enabling the Notifications and develop the TestTeam operator.

C. You should consider creating Transactions Log and develop the TestTeam operator.

D. You should consider leading the Notification the TestTeam operator on job failure.

E. You should consider giving the operator as the failCsafe operator.

F. You should consider enabling all jobs.

Answer: B,D

QUESTION NO: 36


2008 instance. You have received instruction from management to set the instance to utilize one

thread for searches which owns an estimated execution cost less than 2.



Actu

alTe

sts.

com

What should you do?

A. You should consider setting the cost threshold for parallelism.

B. You should consider setting the DBCC SHRINKFILE.

C. You should consider setting the DBCC INDEXDEFRAG.

D. You should consider setting the store procedure.

E. You should consider running a Transact-SQL statement.

Answer: A

Explanation:

Part 7, Manage transparent data encryption. (2 questions)

QUESTION NO: 37


2008 instance. You have received instructions from management to encrypt the database of

CertKiller.com. However, you have just installed the new license and need to use it for encryption.

What should you do?

A. Every individual node should have the encryption license installed.

B. The local group should have the encryption license installed.

C. The no-cluster and cluster group should have the encryption license installed.

D. The no-cluster group should have the encryption license installed.

Answer: A

QUESTION NO: 38


2008 instance that contains a database named CK_DB. CertKiller.com contains a lot of customer

data which is processed by the Web application. You need to keep the customer information safe

since it is confidential.

What should you do?

A. You should consider adding a transaction Log on CK_DB, and set the information to be

encrypted for a fixed time.

B. You should consider enabling the Transparent Database Encryption on CK_DB and back up

the transaction log.

C. You should consider enabling the Transparent Database Encryption on CK_DB and then make

a backup of the system data and the master database.



Actu

alTe

sts.

com

D. You should consider making CK_DB running normal using stored procedures and functions that

is set to encrypt data..

Answer: B

Explanation:

Part 8, Configure surface area. (0 questions)

QUESTION NO: 39


2008 instance. CertKiller.com contains two SQL Server 2008 computers named CERTKILLER-

DB1 and CERTKILLER-DB2. Both of these computers contain a copy of a database named

CK_DB. You are using transactional replication between CERTKILLER-DB1 and CERTKILLER-

DB2 for CK_DB. The backups of the databases are as follows:

* Full backup is performed nightly.

* Transaction log backups are performed hourly.

Furthermore, replication latency is less than two minutes. One morning CK_DB becomes corrupt

on CERTKILLER-DB1 and its state was rendered irreparable. Fortunately, the database on

CERTKILLER-DB2 was not affected. You need to return CK_DB on CERTKILLER-DB1 and

ensure that minimal amount of data loss impact on the users of these servers.

What should you do?

A. You should consider reserving only the latest transaction log backup.

B. You should consider reserving the latest full database backup and the whole transaction logs

made since the past backup could be made.

C. You should consider detaching CK_DB on CERTKILLER-DB2 and copy CK_DB to

CERTKILLER-DB1, and link the database on both servers.

D. You should consider reserving a full database backup on CERTKILLER-DB2 and reserve the

backup to CERTKILLER-DB1.

Answer: D

QUESTION NO: 40


2008 instance. Management wants the backups to be done on a daily basis. Transaction log

backups must be every afternoon and morning and thus you should keep in mind that the content

of the log will grow exponentially resulting in a large transaction log file that needs to be backed

up. You thus received instructions to take appropriate measures when doing the backups of the



Actu

alTe

sts.

com

transaction log files.

What should you do?

A. You should consider cutting down the number of times between transaction log backups for the

database.

B. You should consider cutting the SQL sentences down in size in order to make the smallest

value for the database.

C. You should consider setting the database to use the simple recovery model for the database.

D. You should consider using the DBCC SHRINKFILE statement towards the transaction log file

for the database.

Answer: A

QUESTION NO: 41


2008 instance that contains a database named CK_Prod. CK_Prod need to be backed up

completely.

The transaction log for CK_Prod runs from 08:00 to 17:00, in two hour intervals. The database

snapshot needs to be done daily at 07:00.

A CertKiller.com user named Mia Hamm has removed all the information on CK_Prod which was

entered into the CurrentSpeaker table the previous day. Deletion is the first step for the database.

However, later in the day many other changes in CK_Prod have been effected. You received

instructions to run a full backup on CK_Prod despite all these problems.

What should you do?

A. You should consider reserving the Full Backup of the previous night and all transaction log

backups until the 10:00 backup.

Then you should use the STOP AT statement on some of the restores.

B. You should consider using the Delete subquery in the INSERT statement to transfer the deleted

rows from the morning's database before the snapshot to the CurrentSpeaker.

C. You should consider reserving the Full Backup and all transaction log backups until the 10:00

backup.

Then you should use the STOP AT statement on the last restore.

D. You should consider using the SELECT subquery in the INSERT statement to move the

deleted rows from this morning's database snapshot to the CurrentSpeaker table.

Answer: D



Actu

alTe

sts.

com

QUESTION NO: 42


2008 instance that contains a database named CK_DB. You have received instructions from

management to cut the content of the entire database backup files of CK_DB.

What should you do?

A. You should consider using the following Transact-SQL statement:

BACKUP DATABASE CK_DB TO DISK = 't:\backups\finance.bak'

B. You should consider using the following Transact-SQL statement:

BACKUP DATABASE CK_DB TO DISK = 't:\backups\finance.bak' WITH DIFFERENTIAL;

C. You should consider using the following Transact-SQL statement:

BACKUP DATABASE CK_DB TO DISK = 't:\backups\ TT_DB.bak' WITH COMPRESSION;

D. You should consider using the following Transact-SQL statement:

BACKUP DATABASE CK_DB TO DISK = 't:\backups\finance.bak' WITH COMPRESSION,

DIFFERENTIAL;

Answer: C

QUESTION NO: 43


2008 instance. The CertKiller.com failure recovery plan demands of you to back up the default

trace. However, you need to backup the subdirectory which comprises of the default traces.

What should you do?

A. You should consider using the TRANSACTION LOG.

B. You should consider using the BACKUP.

C. You should consider using the DATA.

D. You should consider using the LOG.

Answer: D

QUESTION NO: 44


2008 instance that contains a database named CK_DB. CK_DB have 100 GB information where 2

GB of the information is changed daily. CK_DB has its recovery model set for Simple. However,

CertKiller.com states that data loss of more than three hours worth of transactions during business

hours is a NO - NO. You need to ensure to use a backup strategy will use the least number of disk



Actu

alTe

sts.

com

spaces and still complies with CertKiller.com.

What should you do?

A. You should consider running a transaction log backup every three hours during business hours.

B. You should consider running incremental as well as differential database backups daily.

C. You should consider running an incremental backup every three hours during business hours.

D. You should consider running a full database backup daily and a differential backup every three

hours during business hours.

Answer: D

QUESTION NO: 45


2008 instance that contains a database named CK_Prod. The backup of CK_Prod is as follows:

* Full backup at 01:00 daily

* Transaction log backup every 20 minutes

* Differential backup every 5 hours

However, you need to do a full backup of CK_Prod at 12:00. You need to make sure that the

backup would not affect the overall backup and restore procedures for CK_Prod and that you can

restore the Backup files in correct sequence.

What should you do?


bak' WITH COPY_ONLY;


bak ' WITH NOUNLOAD;


trn' WITH DIFFERENTIAL;


trn' WITH COPY_ONLY;

E. You should consider using the following:

trn ' WITH NOUNLOAD;

F. You should consider using the following:

bak' WITH DIFFERENTIAL;

Answer: A

Explanation:



Actu

alTe

sts.

com

By using copy_only you do not affect the backup sequence.

Incorrect answer:

trn ' WITH DIFFERENTIAL;

by doing this you already affected your backup sequence and you are only backing up the

transaction log.

Part 2, Restore databases. (8 questions)

QUESTION NO: 46

You work as a database administrator at CertKiller.com. CertKiller.com is using SQL Server 2008

Enterprise Edition. CertKiller.com contains a database that unfortunately has torn page errors. You

need to solve the problem of the torn page errors.

What should you do?

A. You should consider restoring the database from the latest snapshot of the database.

B. You should consider restoring the latest database backup and then restore the transaction logs

which have been made since the latest backup.

C. You should consider using DBCC CHECKDB.

D. You should consider using the newest database backup to restore only the torn page.

Thereafter you should restore any transaction logs which have been made since the latest full

backup.

Answer: D

QUESTION NO: 47


2008 instance that contains a database. The database at CertKiller.com contains transaction

information which is for the Web-based order system.

The full recovery model is used on the database. CertKiller.com is awaiting a few orders that will

come through between 20:00 and 04:00. However, there could be a one hour risk when the

system is running the Database backup. You need to run the backup as soon as possible and get

a solution that will negate this type of risk.

What should you do?



Actu

alTe

sts.

com

A. You should consider running the full backup of the database hourly.

Then set a Check Database Integrity task to run every day to avoid this kind of risk.

B. You should consider running a full backup daily at 20:00.

Then set a second Back up Database task to run differential backups.

Then you should also consider setting a third Back up Database job to run hourly transaction log

backups.

C. You should consider running a full backup daily at 20:00.

Then set a second Back up Database task to run differential backups.

Then you should also consider running a Check Database Integrity task to run hourly.

D. You should consider running a full backup daily at 09:00 and 14:00.

Then set a second Back up Database task to do hourly transaction log backups.

Answer: B

QUESTION NO: 48


2008 instance. The SQL Server 2008 instance contains a database named CK_Prod that contains

has a backup method which is as follows:

* CK_Prod is backed up to a file called CK_Prod.bak is performed at 08:00 hours each day.

* Transaction log backed up to a file called CK_Prod _HHMM.trn is executed every 20 minutes

starting at 09:30 hours.

Furthermore, CK_Prod is configured in single-user mode. One morning at 09:40, a CertKiller.com

user named Mia Hamm stated that some information was removed by a search which was

executed at 09:20. You have received instructions to ensure that you recovery the database to its

original status.

What should you do?


bak WITH NORECOVERY;

RESTORE LOG Product FROM "t:\backups\ CK_Prod_0930.trn"

WITH RECOVERY, STOPAT = 'Mar 8, 2010 09:20 AM';










Actu

alTe

sts.

com



bak WITH STOPAT = 'Mar 8, 2010 09:23 AM';

Answer: A

Explanation:

There wouldn't be any transaction log back at 9:15 to restore from. The backups are taken every

20 minutes from 09:30.

QUESTION NO: 49


Enterprise Edition. You need to get the information on the torn page errors of the database.

However, you need to get a solution on the torn page errors

What should you do?

A. You should consider restoring the latest database backup and then restore the transaction logs

which have been made since the latest backup.

B. You should consider using the newest database backup to restore only the torn page.

Thereafter you should restore any transaction logs which have been made since the latest full

backup.

C. You should consider using DBCC CHECKDB.

D. You should consider restoring the database from the latest snapshot of the database.

Answer: B

QUESTION NO: 50


2008 instance that contains a database named CK_DB1. The backup method of CK_DB1 is

follows:

* Full backup, Sunday at 01:00

* Differential backup, weekdays at 22:00

* Transaction log backup weekdays at 08:00; 12:00 and 16:00

You have received notification that the user database data files have failed on Wednesday at

17:00. You need to ensure that CK_DB1 are saved with the minimal amount of data loss.

What should you do?



Actu

alTe

sts.

com

A. You should consider recovering the full backup taken daily and thereafter recover the

differential backup taken on Wednesday.

B. You should consider recovering the full backup on Wednesday and thereafter recover the

differential backup taken on Sunday.

C. You should consider recovering the full backup on Sunday and thereafter recover the

differential backup taken on Wednesday.

D. You should consider backing up the transaction log and recovery the full backup taken on

Sunday and then recovery differential backup taken on Tuesday.

Answer: D

QUESTION NO: 51


2008 instance that contains a database named CK_DB. The backup of CK_DB is as follows:

* Full backup at 13:00

* Differential backup at 15:00

* Database snapshots at 20:00 and 21:00

Furthermore, the backups and the database snapshots are reserved on a different disk. However,

CK_DB has failed at 18:30. You have received instruction to recover CK_DB with the minimal

amount of data loss.

What should you do?

A. You should consider recovering the Differential backup files only.

B. You should consider recovering the Full backup and the differential backup files.

C. You should consider recovering the Full backup files only.

D. You should consider recovering the database snapshot from 21:00.

E. You should consider recovering the database snapshot from 20:00.

Answer: B

QUESTION NO: 52


2008 instance. During monitoring you notice that one of the computers that have the data files is

not working. However, you need to reserve the database which is from the most recent

configurations of backups as soon as possible.

What should you do?



Actu

alTe

sts.

com

A. You should consider using the most recent store produce log backup for the database.

B. You should consider using the old database backup for the database.

C. You should consider running a stored procedure for the database.

D. You should consider running a transaction log backup for the database.

Answer: D

QUESTION NO: 53


2008 instance. CertKiller.com contains two SQL Server 2008 computers named CERTKILLER-

DB1 and CERTKILLER-DB2. Both of these computers contain a copy of a database named

CK_DB. You are using transactional replication between CERTKILLER-DB1 and CERTKILLER-

DB2 for CK_DB. The backups of the databases are as follows:

* Full backup is performed night by night.

* Transaction log backups are performed hourly.

Furthermore, replication latency is less than two minutes. One morning CK_DB becomes corrupt

on CERTKILLER-DB1 and its state were not repairable. However, the database on CERTKILLER-

DB2 was not affected. You need to return CK_DB on CERTKILLER-DB1 and ensure that minimal

amount of data loss impact on these servers.

What should you do?

A. You should consider detaching CK_DB on CERTKILLER-DB2 and copy CK_DB to

CERTKILLER-DB1, and link the database on both servers.

B. You should consider reserving the latest full database backup and the whole transaction logs

made since the past backup could be made.

C. You should consider reserving only the latest transaction log backup.

D. You should consider reserving a full database backup on CERTKILLER-DB2 and reserve the

backup to CERTKILLER-DB1.

Answer: D

Explanation:

Part 3, Manage and configure databases. (3 questions)

QUESTION NO: 54


2008 instance that contains a database named CK_Prod. The CertKiller.com's SQL Server 2008

is configured to make use of the -T1222 and -T1204 trace flags while booting up. You have



Actu

alTe

sts.

com

received instructions to make sure that the use of these trace flags are also included in the

recovery method of the backups.

What should you do?

A. You should consider backing up the SQL Server Log.

B. You should consider backing up the default database.

C. You should consider backing up the SQL Server registry hive.

D. You should consider backing up the master database.

E. You should consider using a stored procedure.

Answer: C

QUESTION NO: 55


2008 instance that contains a database named CK_Prod. CK_Prod database does execute the

logged operations. You have received instructions to ensure that the database can be recovered

to a specific point in time.

What should you do?

A. You should consider ensuring that CK_Prod uses the full recovery model.

B. You should consider ensuring that CK_Prod uses the half recovery model.

C. You should consider ensuring that CK_Prod uses the Transactions Log.

D. You should consider ensuring that CK_Prod uses the store procedure.

Answer: A

QUESTION NO: 56


2008 instance that contains a database named CK_Prod. The CK_Prod contains the following file

groups:

* The PRIMARY file group that contains the On-Line Transaction Processing (OLTP) information

that is kept in the reserved in the E: volume.

* A file group named CK_USERS that contains the older information that is kept in the F: volume.

* A transaction log of the information that is kept in the I: volume.

Data transferring occurs from the PRIMARY file group to CK_USERS, as a member of the

archiving strategy for CK_Prod. The backup of CK_Prod is as follows:

* The PRIMARY file group six times a day.



Actu

alTe

sts.

com

* The CK_USERS at 20:00

* The transaction log every 20 minutes

However, the volume that contains CK_USERS was lost at 14:00 hours. You have received

instructions to perform a recovery of CK_USERS with minimal data loss and in the shortest time

as possible.

What should you do?

A. You should consider backing up the transaction log and recovery the latest backup of

CK_USERS and recovery the entire transaction log backups after the most resent backup.

B. You should consider backing up the transaction log and recovery the oldest backup of

CK_USERS and recovery the entire transaction log backups after the most resent backup.

C. You should consider recovering the oldest backup of CK_USERS.

D. You should consider recovering the latest backup of CK_USERS.

Answer: D

Explanation:

Part 4, Manage database snapshots. (4 questions)

QUESTION NO: 57


2008 instance that contains a database named CK_Prod. The CK_Prod database uses a full

recovery model. To adapt to business requirements, CertKiller.com now need to make use of a

process which changes 20,000 records from the Accounts table at 22:00 hours, which is

published, daily. You have received instruction to ensure that any changes to the records could be

effected without the database going offline.

What should you do?

A. You should consider using Database Recovery.

B. You should consider using stored procedure.

C. You should consider using Transaction log backup.

D. You should consider using Database snapshots.

Answer: D

QUESTION NO: 58



Actu

alTe

sts.

com


2008 instance that contains a database named CK_Prod1. One of CertKiller.com policies is that

the database should not be changed too often on business days. Thus you have received

instructions from management to create a read-only copy of CK_Prod1 for reporting purposes at

the start of each business day.

What should you do?

A. You should consider using read-only limitations on the Transactions Log.

B. You should consider using a stored procedure.

C. You should consider using the database snapshots.

D. You should consider using the schema-bound views and XML schema.

Answer: C

QUESTION NO: 59


2008 instance that contains a stored procedure which is used as the data source for a report.

However, a CertKiller.com user named Mia Hamm complains that the data returned by the report

does not comply with normal safety standards. During the investigation you notice that the results

are caused by phantom reads. You need to make sure that the report result does not connect to

the other users at CertKiller.com.

What should you do?

A. You should consider making the database Read Committed Snapshot isolation.

B. You should consider changing the stored procedure to utilize the Snapshot isolation level.

C. You should consider making the database run an Auto Update Statistics.

D. You should consider changing the stored procedure to utilize the Read Committed Snapshot

isolation level.

Answer: B

QUESTION NO: 60


for its database administration. CertKiller.com has five automated testing areas for completely

assembled items. The Testing results of every area are stored on the SQL Server 2008 instance.

You have received instructions to create a replication method to ensure that test results flow from

the testing areas to the SQL Server efficiently and that it can be used for reporting.



Actu

alTe

sts.

com

What should you do? (Each correct answer forms part of the solution. Choose TWO.)

A. You should consider developing a separate transactional publication at every testing area for

the test results

B. You should consider developing a separate snapshot publication at every testing area for the

test results.

C. You should consider developing a merge subscription on each distributor to the SQL Server.

D. You should consider developing a push subscription on each testing area.

E. You should consider developing a pull subscription on each distributor to the SQL Server.

Answer: A,D

Explanation:

Part 5, Maintain database integrity. (3 questions)

QUESTION NO: 61


2008 instance that contains a database named CK_Prod. The other day you have received

instructions to update a SQL Server 6.0 database to the SQL Server instance. You need to ensure

that suspect pages in CK_Prod be detected early.

What should you do?

A. You should consider configuring the PAGE_VERIFY database selection to CHECKSUM for the

database.

B. You should consider configuring the database compatibility level option to 1.

C. You should consider switching of the TRUSTWORTHY database selection for the database.

D. You should consider configuring the PAGE_VERIFY database selection to

TORN_PAGE_DETECTION.

Answer: A

QUESTION NO: 62


2008 instance. The newly appointed CertKiller.com trainee wants to know what can be used to

check if the database integrity check (DBCC CHECKDB) was implemented for a special database.

What should you reply?

A. You should tell him to check the log file of INDEXDEFRAG.



Actu

alTe

sts.

com

B. You should tell him to check the log file of ERRORLOG.

C. You should tell him to check the log file of SQLAGENT.

D. You should tell him to check the log file of VIEWDELETE.

Answer: B

QUESTION NO: 63


2008 to administrate and maintain its database. You have received instruction from management

to create a repository of function information. This repository should be created with the following

characteristics:

* The data collector is utilized to collect function information.

* One database reserves function information for all the instances.

* 15 Day old function information must be removed.

* Administrative effort to query and operate function data should be minimal.

What should you do?

A. You should consider creating a single Microsoft SQL Server 2005 Analysis Services (SSAS)

package process to reserve and remove performance data.

B. You should consider setting a management data warehouse process on every instance to

reserve and remove performance data in one database for all the instances.

C. You should consider creating a single Microsoft SQL Service Integration Services (SSIS)

package process to reserve and remove performance data.

D. You should consider creating a single Microsoft SQL Server 2005 Reporting Services (SSRS).

Answer: B

Explanation:

Part 6, Maintain a database by using maintenance plans. (1 question)

QUESTION NO: 64


2008 sample that contains an On-Line Analytical Processing (OLAP) database and a dimension

table named CK_TST. CK_TST contains data that is not in use, but you refresh the table on an

hourly basis. Consequently this results in a large chunk of disk space being taken up by

superfluous data. You need to keep the disk space that will be used to reserve the CK_TST table.

What should you do?



Actu

alTe

sts.

com

A. You should consider using Page compression.

B. You should consider using Windows NTFS file system compression.

C. You should consider using Transaction compression.

D. You should consider using Row compression.

Answer: A

QUESTION NO: 65

You work as a database administrator at CertKiller.com. You have just installed Microsoft SQL

Server Management Studio (SSMS) on one of CertKiller.com's workstations but not the Microsoft

Business Intelligence Development Studio (BIDS). However, you need to design a package with

the following characteristics:

* It must be transactional.

* It must be able to accommodate the use of 10 tables.

* It must be stored in the msdb database of server that is offsite.

What should you do?

A. You should consider using the Package Migration Wizard to create the package.

B. You should consider using the DTS Designer to create the package.

C. You should consider using the Create Package submenu to create the package.

D. You should consider using the Microsoft SQL Server Import and Export Wizard to create the

package.

Answer: D

QUESTION NO: 66


2008 instance to administrate and maintain their database. The SQL Server 2008 instance

contains a database named CK_DB that contains a table named CK_Tbl.

You have to put the output of the entire information from CK_Tbl to a file. You have received

instructions from management to ensure that your solution will provide the desired output in a

Microsoft Office Open XML document format whilst making sure that the data export process is

protected for reuse.

What should you do?

A. You should consider using the bulk copy program function.



Actu

alTe

sts.

com

B. You should consider using the SQLCmd function and save the output to a file.

C. You should consider using the SQL Import and Export Data Wizard and save the output to a

file.

D. You should consider using the bulk copy program function along with a format file and an

output file.

Answer: C

QUESTION NO: 67


2008 instance that contains a database named CK_Prod. You have received instructions to

ensure that the entire SQL Server samples are set to comply with the following requirements.

* Security configurations should be accommodated

* Data fragmentation should be avoided

* Naming conventions should be accommodated

* Force index creation should be accommodated

What should you do?

A. You should consider using the Process Control Tool.

B. You should consider creating a policy in Microsoft SQL Server Management Studio.

C. You should consider creating a maintenance plan in Microsoft SQL Server Management Studio.

D. You should consider creating a recovery plan using the Web Service Tool.

Answer: B

QUESTION NO: 68


2008 instance. You are using the SQL Server Import and Export Wizard to export information from

a SQL Server database to a Microsoft Excel file format. However, you need to save the package

definition to a file using the appropriate command line.

What should you do?

A. You should consider using Register.exe.

B. You should consider using sqlmaint.exe.

C. You should consider using dtexec.exe.

D. You should consider using update.exe.



Actu

alTe

sts.

com

Answer: C

QUESTION NO: 69

You work as a database administrator at CertKiller.com. You have completed the installed

Microsoft SQL Server Management Studio (SSMS) on one of CertKiller.com's workstations but not

the Microsoft Business Intelligence Development Studio (BIDS). However, you need to design a

package with the following characteristics:

* The package should be transactional.

* The package can use 10 tables.

* The package should be stored in the msdb database of a server which is remote.

What should you do?

A. You should consider using the Package Migration Wizard to create the package.

B. You should consider using the DTS Designer to create the package.

C. You should consider using the Create Package submenu to create the package.

D. You should consider using the Microsoft SQL Server Import and Export Wizard to create the

package.

Answer: D

Explanation:

Part 2, Manage data partitions. (2 questions)

QUESTION NO: 70


2008 instance. The SQL Server 2008 instance contains a database named CK_DB that has a

table named CK_Tbl that is partitioned on the ProID column. The partitioning characteristics are as

follows:

Partition 1 has integer values between 5 and smaller than 30,000.

Partition 2 has integer values greater than 30,000.

Due to the growth in business operations the CertKiller.com management foresees the need to

have a third partition in the table. You receive instructions to create a third partition on the table.

This partition must be able to include the integer values greater than 60,000.

What should you do?



Actu

alTe

sts.

com

A. You should consider adjusting existing partition function through utilizing a Split clause.

B. You should consider adjusting existing partition function through utilizing a Merge clause.

C. You should consider adjusting existing partition scheme.

D. You should consider developing a new partition function.

Answer: A

QUESTION NO: 71


2008 instance that contains a database named CK_DB1. The CK_DB1 database contains an

OrderHistory table that has two table partitions which is as follows: The one partition contains the

entire information and the other partition is null. You then create a process to transfer information

from the partition which includes information for the oldest month of the Orders table to the proper

partition of the OrderHistory table. However, you have received instructions to ensure that the

process is capable of running at double capacity at the end of each month.

What should you do?

A. You should consider changing the partition function of the OrderHistory table by using the split

selection and change the proper partition of the Orders table to the proper.

B. You should consider changing the configurations of the Transaction Logs.

C. You should consider changing the Orders table by using the merge selection and change the

partition function of the Orders table through utilizing the split selection.

D. You should consider changing the OrderHistory table by using the merge selection and change

the Orders table by utilizing the merge option.

E. You should consider changing the partition function of the Orders table through utilizing the split

and then change the Orders table by using the merge selection.

Answer: B

Explanation:

Part 3, Implement data compression. (0 questions) Part 4, Maintain indexes. (11 questions)

QUESTION NO: 72


2008 instance to manage and maintain its databases. The SQL Server 2008 instance contains a

database named CK_DB that has a table named CK_Tbl. You then add a Geography data type

column named CK_Colmn to CK_Tbl. The CertKiller.com management also wants CK_Colmn to

make allowance for the development of a spatial index.



Actu

alTe

sts.

com

What should you do?

A. You should consider creating a clustered index for CK_Tbl.

B. You should consider creating a primary key for CK_Tbl.

C. You should consider creating a default index for CK_Tbl.

D. You should consider creating a secondary key for CK_Tbl.

Answer: B

QUESTION NO: 73


2008 instance. The SQL Server 2008 instance contains a database named CK_DB that has a

stored procedure which is as follows:

1 CREATE PROCEDURE Products.TestProcedure

2 AS

3 IFOBJECT_ID(' Products. TableTest1') IS NOT NULL

4 DROPTABLE Products.TableTest1;

5

6 CREATE TABLE Products. TableTest1 (

7 Idint PRIMARY KEY CLUSTERED,

8 Namevarchar(100);

9 );

10

11 ...

12 GO

However, a CertKiller.com user has called the TestProcedure and received the following:

Msg 262, Level 14, State 1, Procedure TestProcedure, Line 15CREATE TABLE permission

permitted in database ' CK_DB '."

You need to correct the problem. What should you do?

A. You should consider changing the CREATE TABLE permission.

B. You should consider adding the WITH EXECUTE AS 'dbo' clause between lines 1 and 2.

C. You should consider adding the ALTER permission on the Products schema to the user.



Actu

alTe

sts.

com

D. You should consider adding the WITH EXECUTE AS 'dbo' clause between lines 3 and 4.

Answer: B

QUESTION NO: 74


2005 database that contains a table named CK_Prod. Product, that has over 50 columns. The

normal Transact-SQL statement queries are as follows:

--QUERY 1

SELECT [Name], [ProductLine], [ListPrice], [Class], [Style] FROM [CK_Prod]. [Product]WHERE

[ProductLine] = 'T'

--QUERY 2

SELECT * FROM [CK_Prod]. [Product] ORDER BY [Name]

You have received instructions to minimize the space for the indexes, however, you should keep

the most common searched to CK_Prod. Product.

What should you do?

A. You should consider creating a clustered index on the ProductLine, ListPrice, Class and Style

columns.

B. You should consider creating a clustered index on the Name column.

C. You should consider creating a nonclustered index on the Name column.

D. You should consider creating a nonclustered index on the ProductLine, ListPrice columns.

Answer: B

QUESTION NO: 75


2008 instance that contains a database. During monitoring, you notice that the following Transact-

SQL query is running slow:

SELECT VideoTitle, UpcNum, RetailPrice, Release Date FROM Srvideo.VideoTitle WITH

(INDEX(0)) WHERE ReleaseDate BETWEEN '20050401' AND '20050510'

With regards to the output, a clustered index exists on the VideoTitle column. Furthermore there is

a nonclustered index on the ReleaseDate column that has the UpcNum and RetailPrice columns.

You also notice that the avg_fragmentation_in_percent is 30 percent, when you explore the



Actu

alTe

sts.

com

sys.dm_db_index_physical_stats dynamic management function (DMF) or the VideoTitle table.

You have recievewd instructions to find the method to resolve the problem.

What should you do?

A. You should consider reproducing the entire index on the VideoTitle table.

B. You should consider deleting the query hint from the query.

C. You should consider changing the query hint to force the optimizer to force an unclustered

index seek.

D. You should consider recreating the index on only the ReleaseDate column.

Answer: B

QUESTION NO: 76


2008 instance that contains a database named CK_DB. CK_DB also contains spatial data types.

You have received instructions to run a database consistency check on CK_DB to hold the spatial

indexes and to make the effect on the database concurrency minimized.

What should you do?

A. You should consider running the following:

DBCC CHECKDB (CK_DB) WITH VIEWDELETE;

B. You should consider running the following:

DBCC CHECKDB (CK_DB) WITH EXTENDED_LOGICAL_CHECKS;

C. You should consider running the following:

DBCC INDEXDEFRAG(CK_DB)

D. You should consider running the following:

DBCC SHRINKFILE(CK_DB)

Answer: B

QUESTION NO: 77


2008 instance. You then install an important cluster which allows constant availability on two

cluster-ready nodes. However, you have received instructions from management to make sure

that the service disruption is minimized by setting the cluster to failover.

What should you do?



Actu

alTe

sts.

com

A. You should consider using the Prevent automatic failback option.

B. You should consider using the Allow failback immediately option.

C. You should consider using the Allow failback only during non-business hours option.

D. You should consider using the Allow failback only during business hours option.

Answer: A

QUESTION NO: 78


2008 instance that contains a database named CK_DB1. CK_DB1 contains a table named

CK_Prod that has a clustered primary key called CK_ProdID. Also, the CK_DB1 contains a single

XML column called CK_ProdXml which stores XML data. However, CK_ProdXml has an XML

index. You then create a new column called CK_ProdName to the Production table. You need to

make CK_ProdID the primary key.


A. You should consider making the XML index on CK_ProdName disabled.

B. You should consider changing the XML index

C. You should consider reproducing the XML index.

D. You should consider transferring the XML data to a temporary before clearing the XML

information from the original table by configuring CK_ProdName to NULL.

E. You should consider setting the ALLOW_ROW_LOCKS = ON option.

F. You should consider using the statement "Drop the XML index on the table" and change the

primary key.

Answer: C,F

QUESTION NO: 79

You work as a database administrator at CertKiller.com. CertKiller.com is using a Microsoft SQL

Server 2008 Analysis Services (SSAS) instance. You have received instruction to deploy a data

mining structure that has the Microsoft Clustering mining model "From Scalable K-Means to Non-

scalable K-Means". You need to modify the attribute of the mining model.

What should you do?

A. You should consider changing SHRINKFILE.

B. You should consider changing MODELLING_CARDINALITY.

C. You should consider changing CLUSTERING_METHOD.



Actu

alTe

sts.

com

D. You should consider changing INDEXDEFRAG.

Answer: C

QUESTION NO: 80


2008 instance that contains a database named CK_DB. CK_DB contains a table named CK_Prod

that contains several indexes and numerous rows. However, 40 % of the indexes on CK_DB are

fragmented. You have received instructions to ensure that the effect on database availability is

minimized.

What should you do?

A. You should consider using the Full index option.

B. You should consider using the Page index option.

C. You should consider using the Online option.

D. You should consider using the Offline option.

Answer: C

QUESTION NO: 81


2008 instance that contains a database named CK_Prod. CertKiller.com is using the following to

join two tables on a column called CK_Cmn.

SELECT P.*, PD.*FROM Products

AS PINNER JOIN Products AS PD ON PD.CK_Cmn = PD.CK_Cmn

However, when you run the search you received the following error:

"Msg 468, Level 16, State 9, Line 17Cannot resolve the collation conflict between

'SQL_Latin1_General_CP1_CS_AS' and 'SQL_Latin1_General_CP1_CI_AS' in the equal to

operation."

You need to ensure that you can change the ON clause of the search to perform a join. What

should you do?


CK_Cmn) = UPPER(P.CK_Cmn)



Actu

alTe

sts.

com


CK_Cmn) = TRIM(P.CK_Cmn)


CK_Cmn= P.CK_Cmn COLLATE SQL_Latin1_General_CP1_CI_AS


CK_Cmn= P.CK_Cmn COLLATE SQL_Latin1_General_CP1_CS_AS

Answer: D

QUESTION NO: 82


2008 cluster. You have received instructions from management to perform a manual failover on

the cluster.


A. You should consider Unplugging the network cable(s) from the active node.

B. You should consider recreating a cluster for a backup to the active node.

C. You should consider using Encrypting File System (EFS).

D. You should consider deleting the shared array from the active node.

E. You should consider unplugging all superfluous cables from the active node.

Answer: A,D

Explanation:

Part 5, Manage collations. (0 questions)

QUESTION NO: 83


2008 instance. One morning you have received numerous complaints from the CertKiller.com

users that they cannot connect to the default instance or the named instances. You need to make

sure that the users can access the entire SQL instances.

What should you do?

A. You should consider using the IIS Service.

B. You should consider using the Service of Web Service.

C. You should consider using the Service of SQL Server Browser.

D. You should consider using the Service of Server.



Actu

alTe

sts.

com

Answer: C

QUESTION NO: 84

You work as a database administrator at CertKiller.com. CertKiller.com contains a SQL Server

2008 computer named CERTKILLER-DB01. CERTKILLER-DB01 contains three examples of SQL

Server that is supposed to have the ability to connect to the dedicated administrative connection to

have a disaster recovery plan. During testing you can connect to the connection on CERTKILLER-

DB01's default example to test its ability; however, you cannot connect to the dedicated

connection on the two other examples. You have received instructions to do the following:

* Make sure that the examples are implementing.

* Make sure that the client applications can approach them.

* Ensure that the other administrators cannot connect to any dedicated connections on

CERTKILLER-DB01.

* Ensure that you could connect to the dedicated connection on all three examples.

What should you do?

A. You should consider rebooting the default examples of SQL Server.

B. You should consider resetting the default example and not use port 1434.

C. You should consider using the IIS tool to make the dedicated administrative connection.

D. You should consider starting the SQL Server Browser service and set is to run automatically.

Answer: D

QUESTION NO: 85


2008 instance. You need to use the Windows System Monitor and process the output of how

many users access the SQL Server instance.

What should you do?

A. You should have the object of SQLServer:General Statistics captured.

B. You should have the object of SQLServer:Exec Statistics captured.

C. You should have the object of SQLServer:Buffer Manager captured.

D. You should have the object of SQLServer:Access Methods captured.

Answer: A

Explanation:



Actu

alTe

sts.

com

Part 2, Identify concurrency problems. (3 questions)

QUESTION NO: 86


2008 instance that contains a database named CK_Prod. However, recently CK_Prod has

produced deadlock problems. You have received instructions from management to get the

deadlocks on the SQL Server error log.


A. You should consider using the SQL Profiler trace.

B. You should consider enabling the Server Auditing for CK_Prod.

C. You should consider setting up the trace flags and reboot the SQL Server instance.

D. You should consider using the Transactions Log.

Answer: A,C

QUESTION NO: 87


2008 instance. A CertKiller.com user named Mia Hamm was complaining that she is waiting

forever for a search to finish. You need to make sure if the query is blocked.

What should you do?

A. You should consider using the IIS utility.

B. You should consider using the Process Monitor utility.

C. You should consider using the Job Activity Monitor utility.

D. You should consider using the Activity Monitor utility.

Answer: D

QUESTION NO: 88


2008 instance. You have received instructions to clarify the longest-running common language

runtime (CLR) searched.

What should you do?

A. You should consider using the sys.dm_exec_requests view.



Actu

alTe

sts.

com

B. You should consider using the sys.dm_exec_sessions view.

C. You should consider using the sys.dm_exec_query_stats view.

D. You should consider using the sys.dm_os_wait_stats view.

Answer: C

Explanation:

Part 3, Identify SQL Agent job execution problems. (1 question)

QUESTION NO: 89


2008 instance for a Server Agent job. During a routine monitoring, you notice that the Server

Agent job is not running as it should be. However, when you check the job history information, you

saw that it was not complete and shortened. However, in the future, you need to ensure that the

info from the job history is useful for browsing.

What should you do?

A. You should make use of the Transactions Log to keep all the execution trace messages.

B. You should make use of job steps to send the output to a file enable.

C. You should enable the write OEM file.

D. You should enable the notifications.

Answer: B

Explanation:

Part 4, Locate error information. (5 questions)

QUESTION NO: 90

You work as a database administrator at CertKiller.com. You are working on a SQL Server 2005

database called TestCont and are using a Transact-SQL script to restore TestCont. The Transact-

SQL script is as follows:

RESTORE DATABASE TestCont

FROM contracts_bu_device

WITH CONTINUE_AFTER_ERROR, CHECKSUM, RECOVERY

However, after the restore there were still errors in some page restores in the SQL Server logs.

You have received instructions to repair the database pages as soon as possible.



Actu

alTe

sts.

com

What should you do?


DBCC CHECKDB (Contracts, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS


ALTER DATABASE Contracts SET TORN_PAGE_DETECTION ON


ALTER DATABASE Contracts SET TRUSTWORTHY ON


DBCC CHECKDB (Contracts, REPAIR_ALLOW_DATA_LOSS) WITH TABLOCK

Answer: D

QUESTION NO: 91


2008 instance. You have received instruction from management to keep a management data

warehouse. It will be used to store functions data through utilizing the data collector. For this, you

need to use a process which gathers and uploads information in the management information

warehouse on different schedules.

What should you do?

A. You should consider developing different SQL Agent jobs.

B. You should consider developing an on-demand non-cached data collection.

C. You should consider developing a cached data collection.

D. You should consider developing a scheduled non-cached data collection.

Answer: C

QUESTION NO: 92


2008 instance that contains a database named CK_DB1. The CertKiller.com management would

like the database to conform to the following security requirements:

Only successful and failed logon attempts in log files.

The SQL Server 2008 instance must close if the records are not written to the log files.

You need to set the SQL Server sample to conform to the security requirements.

What should you do?



Actu

alTe

sts.

com


sp_configure 'show advanced options', 1;

GO

RECONFIGURE;

GO

sp_configure 'common criteria compliance enabled', 1;

GO

RECONFIGURE

GO


(STATE=ON);

GO

ALTER SERVER AUDIT Srv_Audit WITH (STATE=ON);

GO


sp_configure 'default trace enabled', 0;

GO

RECONFIGURE

GO



GO

RECONFIGURE;

GO

sp_configure 'common criteria compliance enabled', 0;

GO

RECONFIGURE

GO

E. You should consider adding the following:

CREATE SERVER AUDIT Srv_Audit TO FILE ( FILEPATH ='\\SQL_SERVER\Audit\' ) WITH

(ON_FAILURE = SHUTDOWN);

GO

CREATE SERVER

F. You should consider using the following:


GO

RECONFIGURE;

GO

Answer: A



Actu

alTe

sts.

com

QUESTION NO: 93


2008 instance. The SQL Server 2008 instance contains a database named CK_DB. You are

planning to collect performance information on the whole examples with the data collector. You

should reserve collected data in CK_DB and to gather and load function data in the management

data warehouse every 12 hours.

What should you do?

A. You should consider developing a cached data collection.

B. You should consider developing an on-demand non-cached data collection.

C. You should consider developing an on-demand cached data collection.

D. You should consider developing a scheduled non-cached data collection.

Answer: D

QUESTION NO: 94


2008 instance. One morning you have a complaint from a CertKiller.com user that applications on

the server is performing very sluggish. However, you do not want to use the table scans get more

information because of the poor performance.

What should you do?

A. You should consider using the SQLServer:Buffer Cutting utility in the Windows System Monitor.

B. You should consider using the SQLServer:Disk Manager utility in the Windows System Monitor.

C. You should consider using the SQLServer:Databases utility in the Windows System Monitor.

D. You should consider using the SQLServer:Access Methods utility in the Windows System

Monitor.

Answer: D

QUESTION NO: 95


2008 instance. CertKiller.com contains quite a few databases that are utilized by applications. You

are planning to use the Resource Governor to cut the result of searches. These searches are run

via Microsoft SQL Server Management Studio. However, the characteristics should be as follows:

The searches done by the SQL Server Management Studio should not exceed 40 % of CPU

utilization and the applications need of 200 % CPU utilization may be allowed when needed. You



Actu

alTe

sts.

com

need to comply with the CertKiller.com needs.

What should you do?

A. You should consider developing a new resource pool and set up the MAX_CPU_PERCENT

selection to 60.and grant this resource pool to the workload group.

B. You should consider developing a new resource pool and set up the MAX_CPU_PERCENT


C. You should consider developing a default resource pool and set up the MAX_CPU_PERCENT


D. You should consider developing a default resource pool and set up the MAX_CPU_PERCENT


Answer: B

Explanation:

Part 2, Use the Database Engine Tuning Advisor. (1 question)

QUESTION NO: 96


2008 instance. CertKiller.com contains a database that is used by a mission critical application.

You have received complaints from a CertKiller.com user named Mia Hamm that the performance

of the server is not running by her as it should be. You need to use the Database Engine Tuning

Advisor to help the functions of the application however you should ensure that the performance of

the server does not affect the other users.

What should you do?

A. You should consider making the XP_MSVER stored procedure disable on the remote server.

B. You should consider making the XP_MSVER stored procedure enable on the remote server.

C. You should consider setting up a test server which has the same hardware setting, before using

the dta.exe utility on the test server along with an XML input file.

D. You should consider making the XP_MSVER stored procedure enable on the local server.

Answer: C

Explanation:

Part 3, Collect trace data by using SQL Server Profiler. (3 questions)

QUESTION NO: 97



Actu

alTe

sts.

com

You work as a database administrator at CertKiller.com. CertKiller.com is using a remote SQL

Server 2008 instance. One morning you have received complaints that the applications are

running sluggish. To get hold of the workload, you need to trace the table on the remote SQL

Server instance. You need to use the Database Engine Tuning Advisor and use the SQL Profiler

tool to analyze the workload of the remote SQL Server instance on a local SQL Server instance.

What should you do?

A. You should consider enabling the XP_MSVER stored procedure on the local server.

B. You should consider enabling the XP_MSVER stored procedure on the remote server.

C. You should consider recapturing the workload to a trace file by using the SQL Profiler tool.

D. You should consider capturing the workload to a trace file by using the SQL Profiler tool.

Answer: C

QUESTION NO: 98


2005 instance. In CertKiller.com there are 15 servers which are used by other administrator at the

company. However, they need to comply with the company service level agreements (SLAs) on

querying response time. Some of the administrators need information of the method on controlling

query response times on the servers.

What should you do?

A. You should consider teaching them to use the System Monitor Control Tool.

B. You should consider creating a query that searches the sys.dm_db_partition_stats dynamic

management view (DMV) and distribute this search to them.

C. You should consider developing SQL Server Profiler templates, which contain query start times

and end times and distribute these templates to the administrators.

D. You should consider developing an XML schema which includes the event and column names

of the query response times. That can be captured in SQL Server Profiler.

Answer: C

QUESTION NO: 99


2008 instance that contains databases that host two applications for acquiring and selling.

You were busy with the setting of the Resource Governor with the purpose of cutting the maximum

CPU search time permitted through the applications. However, after the setting, you notice that



Actu

alTe

sts.

com

some of the reports of the acquiring application does not execute successfully. You need to

ensure that you alter the Resource Governor settings to permit more CPU time.

What should you do?

A. You should consider permitting the workload group that is utilized by default.

B. You should consider permitting the workload group that clarifies the selling application.

C. You should consider permitting the workload group which is utilized through the acquiring

application.

D. You should consider permitting the classifier function that is used by default.

Answer: C

Explanation:

Part 4, Collect performance data by using Dynamic Management Views (DMVs). (3 questions)

QUESTION NO: 100

You work as a database administrator at CertKiller.com. One morning you have received

numerous complaints from the users at CertKiller.com that the SQL Server 2008 application is

running very sluggish. You need to check the disk, CPU, and memory utilization; information and

still consider the network.

What should you do?

A. You should consider checking the master database's recovery model.

B. You should consider checking the proper dynamic management views (DMVs).

C. You should consider checking the distribution of the hosted statistics.

D. You should consider checking the statistics update command's the output.

Answer: B

QUESTION NO: 101


2008 instance that contains a database named CK_DB1. CertKiller.com also contains an

application that makes use of the SELECT command that triggers the population of multiple

tables. This application also makes use of CK_DB1. One morning you have received several

complaints from the users that the application is performing very sluggish. You now need to

control the status of the sample without affecting the application performance.

What should you do?



Actu

alTe

sts.

com

A. You should consider using the Process Monitor Tool.

B. You should consider using the Web Service.

C. You should consider using the SQL Server Resource Governor.

D. You should consider using the Dynamic Management Views.

Answer: D

QUESTION NO: 102


2005 instance. The database enables the CertKiller.com users to operate both ad hoc and

predefined searches. There is however a suspicion that some searches will cost too much of the

available resources and you need to make sure which searches use the most resources.

What should you do?

A. You should consider using the DBCC INPUTBUFFER requirements.

B. You should consider using the sqldiag function.

C. You should consider using the SHOWPLAN session selection.

D. You should consider using the sys.dm_exec_query_stats dynamic management view (DMV).

Answer: D

Explanation:

Part 5, Collect performance data by using System Monitor. (0 questions) Part 6, Use

Performance Studio. (0 questions)

QUESTION NO: 103


2008 instance that contains three databases named CK_DB1, CK_DB2 and CK_DB3. Each of

these databases runs on different servers.

CK_DB1 and CK_DB2 have an important database that is mirrored. CK_DB3 is a helper and

CK_DB1 is considered the principle database. You then implement a patch that requires CK_DB1

and CK_DB2 to be rebooted. However since the patching was done as quickly as possible the

database that was online at the time could not use the patch. This database cannot use the patch

present which result in that the database does not failover to the other partner.

What should you have done?



Actu

alTe

sts.

com

A. You should consider using the patch to the server that implements CK_DB1 before using the

patch to the server that implements CK_DB2.

B. You should consider using the patch to the server that implements CK_DB3 before using the


C. You should consider using the patch to the server that implements CK_DB2 before using the


D. You should consider stopping the mirroring session, use the patch to the server that

implements CK_DB2 and resume the mirroring session.

Answer: D

Explanation:

Part 2, Implement a SQL Server clustered instance. (0 questions) Part 3, Implement log

shipping. (3 questions)

QUESTION NO: 104


2008 instance. The SQL Server 2008 instance contains a database named CK_Prod which are

logged shipping to a remote SQL Server 2008. However, after reboot of the primary SQL Server

instance, you notice that the log shipping has no functionality. You need to troubleshoot the log

shipping of CK_Prod.

What should you do next?

A. You should make sure that the SQL Server Agent is started on the main server.

B. You should consider using the EXTENDED_LOGICAL_CHECKS option and run a DBCC

INDEXDEFRAG statement on CK_Prod.

C. You should make sure that CK_Prod uses the Simple recovery model.

D. You should consider using the EXTENDED_LOGICAL_CHECKS option and run a DBCC

CHECKDB statement on CK_Prod.

Answer: A

QUESTION NO: 105


2008 sample named CKSmp1. Furthermore, CKSmp1 contains a database named CK_DB. The

CK_DB uses the bulk-logging recovery mode. You then use the WAN to log ship CK_DB.

Furthermore, CK_DB's indexes are reproduces by a scheduled work. You then make certain that

the log shipping adds the number to the job. You need to minimize the size of the log backups

used by log shipping.



Actu

alTe

sts.

com

What should you do?

A. You should consider using the Full recovery mode on CK_DB.

B. You should consider using the half recovery mode on CK_DB.

C. You should consider deleting the indexes and create new one.

D. You should consider making a compress of the log file backups.

Answer: D

QUESTION NO: 106


2008 instance that contains a database named CK_DB1. The CK_DB1 database uses SQL

Server log shipping; however, log shipping will occur within the hour. You have received

instructions to make a full backup however; you need to cut the net bandwidth utilization when

maintenance takes place at night.

What should you do?

A. You should consider setting the database to utilize the bulk-logged recovery model.

B. You should consider adding the time during transaction log backups.

C. You should consider disabling log shipping after the nightly maintenance.

D. You should consider reproducing only those indexes that ask it at night.

Answer: D

Explanation:

Part 4, Implement replication. (2 questions)

QUESTION NO: 107


2008 instance. CertKiller.com contains a SQL Server 2008 sample named CKSam that contains a

database named CK_DB. Furthermore, CK_DB does have a ProductItems table. A Replication

topology is needed to copy the ProductItems table to the SQL Server samples included in

computers. The only time the ProductItems will be refreshed, is when the computers do not link to

the CertKiller.com network. Furthermore, the Products table is from between reconnections

frequently. You need to run the Replication topology alongside the Subscription type with the

minimum amount of bandwidth usage.

What should you do?



Actu

alTe

sts.

com

A. You should consider running the Merge Replication topology simultaneously with a Pull

Subscription.

B. You should consider running the Merge Replication topology simultaneously with a Push

Subscription.

C. You should consider running the Transactional Replication topology simultaneously with a Push

Subscription.

D. You should consider running the default Replication Replication topology simultaneously with a

Pull Subscription.

Answer: A

QUESTION NO: 108


2008 instance that contains a database named CK_Prod. The database contains a Products table.

You have developed a Merge Replication topology and a Publication which owns a 25-day

retention period; so that the Products table can be reproduce to the SQL Server instances at

remote locations. After a one month break the CertKiller.com user named Mia Hamm, noticed that

CK_Prod does not include her latest data. During the investigation you came upon the following

error message: "Replication: expired subscription dropped."

Mia Hamm needs the latest data in her database and you should ensure that the information

changes are properly doubled.

What should you do?

A. You should consider uploading synchronized changes.

B. You should consider reinitializing the publication and produce a new snapshot immediately.

C. You should consider uploading unsynchronized changes and reinitializing the publication.

D. You should consider uploading unsynchronized changes.

Answer: B



70-432

Documents

sql server service

microsoft sql server

sql statement

sql server instances

sql server sample

data file

db mdf alter database

single file