Arc Electrochemical Sensors for ORP measurement Polilyte Plus ORP Arc for electrochemical ORP measurements in chemical industry and water treatment X Single Pores for direct contact between electrolyte and medium. No clogging! X +/- 1500mV ORP (oxidation reduction potential) range X ± 0.5mV Repeatability at 25°C EasyFerm Plus ORP Arc for electrochemical ORP measurements in Biotechnology, foods and beverages and pharmaceuticals industry. X Prepressurized for a clog- free diaphragm and minimized diaphragm potentials X +/- 1500mV ORP (oxidation reduction potential) range X ± 0.5mV Repeatability at 25°C Arc benefits for electrochemical measurement technology No transmitter needed: Cost savings at acquisition, reduction of commissioning time, space saving Direct connectivity to control system: Reliable, robust signal, direct data transfer from the sensor to PC / PLC, through 4-20mA and digital communication, no humidity, interference, no cable length issues Intelligence in the sensor: Fully compensated measurment value, integrated diagnostic, history, sensor and calibration data Measurement units for ORP: mV / Temperature: °C, °F, K Easy operation: User-friendly interface, configuration profile, quality indicator
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Arc Electrochemical Sensorsfor ORP measurement
Polilyte Plus ORP Arc for electrochemical ORP measurements in chemical industry and water treatment XXXXXX Single Pores for direct contact between
electrolyte and medium. No clogging!
XXXXXX +/- 1500mV ORP (oxidation reduction potential) range
XXXXXX ± 0.5mV Repeatability at 25°C
EasyFerm Plus ORP Arc for electrochemical ORP measurements in Biotechnology, foods and beverages and pharmaceuticals industry. XXXXXX Prepressurized for a clog- free diaphragm and
minimized diaphragm potentials
XXXXXX +/- 1500mV ORP (oxidation reduction potential) range
XXXXXX ± 0.5mV Repeatability at 25°C
Arc benefits for electrochemical measurement technologyNo transmitter needed: Cost savings at acquisition, reduction of commissioning time, space savingDirect connectivity to control system: Reliable, robust signal, direct data transfer from the sensor to PC / PLC, through 4-20mA and digital communication, no humidity, interference, no cable length issuesIntelligence in the sensor: Fully compensated measurment value, integrated diagnostic, history, sensor and calibration dataMeasurement units for ORP: mV / Temperature: °C, °F, KEasy operation: User-friendly interface, configuration profile, quality indicator
Ordering Information
Sensors PartNumber Description a-length 243050 EasyFerm Plus ORP Arc 120 120 mm
355 194 Demo Cable (1m, open end, with plug power pack)
355 217 Sensor cable VP8, 1m
355 218 Sensor cable VP8, 3m
355 219 Sensor cable VP8, 5m
355 220 Sensor cable VP8, 10m
355 221 Sensor cable VP8, 15m
355 222 Sensor cable VP8, 20m
All Hamilton Arc sensors offer fully compensated intelligent measurement signals with 4-20mA and digital output and wireless transmission using the optional Arc Wi adapter.
4–20 mA analog interface #1 is a two-wire interface and can be powered directly from 4–20 mA. The second 4–20 mA and the digital RS485 are three-wire interfaces and require a separate power supply.
Example of connection for 4-20 mA sensor output in two-wire mode
Hamilton Americas & Pacific Rim4970 Energy Way Reno, Nevada 89502 USA Tel: +1-775-858-3000 Fax: +1-775-856-7259 [email protected]