I/ !MANUFACTURING PATENT PENDING ALL DIMENSIONS VARIABLE BASED ON ARCHITECTURAL A ND ENGINEERING REQUIREMENTS 688 Walsh Ave Santa Clara, CA 95050 408 - 827 -1700 5/8'' GALV. THROUGH BOLTS TYP. ROOF FLASHINGS NOT SHOWN FOR CLARITY TUBE END CRIMPED CLEVIS DETAIL CLEVIS WITH LEFT HAND THREADS 2'' 0 X • 120 TUBING TYP. 1 '' THREADED ROD - CUSTOM RIGHT HAND THREADS ONE END/ LEFT HAND THREADS OPPOS. END NUT WITH LOCK WASHER TO TIGHTEN ROD IN PLACE 3'' X 3 '' X 1 / 4 '' STEEL PLATE 5/8'' DIA. BOLT TIGHTENED I N PLACE - ------ -48' ' ------- 3 '' X 3 '' X 1 / 4 '' STEEL PLATE --FACING HAT CHANNEL 3 '' X 3 '' X 1 /4 '' STEEL PLATE HOLE PRE-PUNCHED BASE PLATE WITH ANCHORS SIDE VIEW ADJUSTABLE EQUIPMENT SCREEN FRAME SAN CARLOS
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
I/ !MANUFACTURING
PATENT PENDING
ALL DIMENSIONS VARIABLE BASED
ON ARCHITECTURAL AND ENGINEERING
REQUIREMENTS
688 Walsh Ave
Santa Clara, CA 95050
408 - 827 -1700
5/8'' GALV. THROUGH
BOLTS TYP.
ROOF FLASHINGS NOT SHOWN FOR CLARITY TUBE END CRIMPED
CLEVIS DETAIL
CLEVIS WITH LEFT HAND
THREADS
2'' 0 X • 120TUBING TYP.
1 '' THREADED ROD - CUSTOM RIGHT HAND THREADS ONE END/ LEFT HAND THREADS OPPOS. END
---NUT WITH LOCK WASHER TO TIGHTEN ROD IN PLACE
3'' X 3 '' X 1 / 4 '' ....__ STEEL PLATE
5/8'' DIA. BOLT TIGHTENED IN PLACE
- - - - - - --48'' - - - - - - --------
3 '' X 3 '' X 1 / 4 '' STEEL PLATE
--FACING
HAT CHANNEL
3 '' X 3 '' X 1 / 4 '' STEEL PLATE HOLE PRE-PUNCHED
BASE PLATE WITH ANCHORS
SIDE VIEW ADJUSTABLE EQUIPMENT SCREEN FRAME SAN CARLOS
Related Documents
