600V Diesel Locomotive Cable Diesel Locomotive Cable (DLO) Rated 600 Volts, 90°C. UL Listed. CSA R90. Accepted for listing by MSHA. RoHS Compliant. APPLICATIONS DLO is especially suited to supply power to traction motors of diesel-electric locomotives. It is also recommended as a portable cable for drilling rigs, on-shore or off-shore, railroad and transit car wiring, electric earth-moving equipment, in shipyard applications, arc welder supply leads, power and control jumper cable, telcom power supply and motor leads. The cable is suitable for use in wet or dry areas, conduit, ducts, troughs or trays, and where superior electrical properties are desired. The maximum continuous conductor temperature for normal operation is 90°C in dry locations and 75°C for wet. DLO resists oils, acids, alkalines, heat, flame, and has abrasion resistance. STANDARDS & REFERENCES • UL listed • Accepted for listing by MSHA • CSA R90 • RoHS Compliant CONSTRUCTION • Conductor: 10 AWG through 777.7 MCM stranded tinned annealed copper per AAR 589 • Insulation: Premium-grade 90°C EP • Jacket: CPE, black • Sample Jacket Marking: SIZES 10 THROUGH 1 AWG – (SIZE) (STRANDING) 90°C DLO 2000 VOLTS P-7K-123040 MSHA CSA R90 1000V (UL) RHH or RHW 600 VOLTS SIZES 1/0 THROUGH 646.4 – (SIZE) 90° C DLO 2000 VOLTS P-7K-123040 MSHA CSA R90 1000V (-40°C) FT-1 – (UL) RHH or RHW 600 VOLTS SUNLIGHT RESISTANT FOR CT USE. NOTE: (535.3 AND 646.4 MCM printed (UL) RHH OR RHW 2000 VOLTS). SIZE 777.7 MCM ONLY - C(UL) TYPE RHW-2 2KV VW-1 FOR CT USE TYPE DLO 2000V 90°C P-102 MSHA