This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
6.0 Gallon 90mil LBR Pail with Tear Skirt Cover*Note: Available with UN-Solids Y27/S rating
Multiple UsesDry ProductsLiquid Products
Product CodesContainer: 5600 Series
Description: 6 gallon LBR Standard Pail
Cover: 6500 SeriesDescription: Standard Tear Skirt CoverNote: *Multiple fitting and venting options available
All dimensions are nominalunless otherwise specified.
TOLERANCE
Loc:
This drawing is loaned with the expressed agreement that the infor-mation contained therein is the sole
property of Greif Inc. and can not be, in whole or in part, reproduced,
copied or made available to a third party except upon written permission
of Greif Inc.
NOTICE
SCALE:DATEDATE:
DATE:
DATE:
MAT'L HT TR.
1 1HDPE
GP-55PRODUCT DRAWING
T.N., B.J.
T.N.B.J.
1/13/16
1/15/16
AS NOTED
GP-55 PD
8/21/15
A A
BC
REVISION HISTORYREV DESCRIPTION BY DATE APPROVED
11.375
23.375 `.250Ø
23.375 `.250Ø
HAND HOLD SUMP
11.813
34.750`.250
15.250`.125
NOTE: 56X4 EUROPEAN BUTTRESS AVAILABLE AS AN OPTION.
This specification does not relieve the customer of their ultimate responsibility for the determination of the appropriate container. It is the customer's responsibility to select the appropriate packaging based upon all information at their disposal including the specific application, regulatory compliance, product compatibility and shipping requirements. WE HEREBY DISCLAIM AND EXCLUDE ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Marking (ID) Plates UN: Two (one front and one back)
UN Markings UN 31HA1/Y/(mmyy)/USA/GBC/3668/2038/1041L/60kg/100kPA/(mmyy)/(mmyy)
Corner Protectors UN: Four (4) Material: HDPE
Pallet Material: Galvanized Steel Base Pan and Bottom, Injection Molded HDPE Corner Feet
PLASTIC DRUM STANDARD PRODUCT DESCRIPTION
Drum identifier:
GP 550
Product Name: GP-55
Regulatory Information: Bill of Materials: Product Illustration:
un 1H1/Y1.9/150(Test Report P108)
un 1H1/Y1.4/150 with vent(Test Report P102)
un 1H1/x1.5/250 (Test Report P309)
Body:
GP-55, extrusion blow molded high molecular weight high density polyethylene (HMW-HDPE)
Fittings:
2" BTR and 2" NPS.
Vented bungs are available as an option.
56X4 European BTR available.(BTR = Buttress, NPS = National Pipe Straight thread)
Nominal Capacity: Outage: Overall Height: Total Weight:
55.0 U.S. Gallons 2.2 U.S. Gallons 34.8 inches 21.0 lbs.
Actual Capacity: Outage %: Body Height: Body Weight:
57.2 U.S. Gallons 4.0 % 34.8 inches 20.8 lbs.
Export Cubes: Nominal O.D.: Mid Panel Height: Min. wall thickness:
10.41 cu. ft. 23.3 inches 10.3 inches 0.090 inches
Special Notes:
1) Maximum filling temperature 150 F. When filled at this recommended maximum filling temperature drums should be allowed to cool to ambient prior to stacking. Drums filled at elevated temperatures should be vented properly to prevent vacuum formation within the drum which can compromise stacking capability.
2) Drums may be stacked 3 high (1+2) maximum with pallets between drums.
For nonvented drums, maximum top load on bottom drums not to exceed 2000 lbs each.For vented drums, maximum top load on bottom drums not to exceed 1400 lbs each.Pallets should be of good quality that provides adequate support for plastic drums.
3) Handle with parrotbeak, side grabber, and sling.4) Fits four wide in standard trailer.5) Recycle symbol embossed on bottom.6) Compatibility with hazardous materials as listed
in 49CFR are the responsibility of the filler.7) Test Report P309, available from Lavonia with a
drum weight of 25.3 lbs.8) Available with Micromatic and Colder Products
devices upon request.
Data, dimensions, and information provided on this document are considered as nominal values for general purpose use in evaluating this product for customer's application. These are not considered as manufacturing specifications. It is the responsibility of the customer or filler to select the appropriate packaging for use or resale, based on all information at their disposal, including specific application, regulatory compliance, product compatibility, transport, storage, and material handling requirements. Regulatory compliance for remanufacture, repair, or reuse of packaging is the responsibility of the reconditioner, customer and filler. Refer to appropriate regulations for packaging filling, transport, and storage requirements with your specific product.WE HEREBY DISCLAIM AND EXCLUDE ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
38mm PORTOLA STANDARD SCREW FINISHPER SPEC #N701023 Rev.A
THREAD NOTES:1) 6 THREADS PER INCH2) THREAD START AT PARTING LINE3) 1-1/4 TURNS FULL THREAD4) ALL DIMENSIONS .005
E
M NP
REVISIONSREV. DESCRIPTION DATE APPROVEDA ADDED ALTERNATE NECK FINISH 10/16/2007 SPK
B1) ADDED "E" DIMENSION TO REPRESENT CUSTOMER
PART MORE ACCURATELY 2) WAS .547 3) WAS .467 4) WAS .298 5) WAS .137
12/14/2007 SPK
C UPDATED NECK PER CHECKS COMPLETED ON 8/28/08 AND CUSTOMER BERRY DWG# 26315192-02-E 9/8/2008 SPK
D ADDED THEORETICAL FILL LEVEL AT 115 DEG F 1/30/2009 KDGE ADDED 38mm PORTOLA STANDARD SCREW FINISH 8/3/2009 MJSF REVISED TO SHOW PORTOLA STANDARD SCREW FINISH
ON BOTTLE (SP400 WAS ON BOTTLE) 8/4/2009 MJSG ADDED 38mm ZELLER FINISH 4/3/2012 MJSH UPDATED ZELLER NECK TO LATEST SPEC #ZC-2663-5 8/10/2012 MJSJ UPDATED ZELLER NECK TO ZC-2663-6 SPEC 11/8/2012 MJSK 1.515 MIN. WAS +.005/-.000 PER ZC-2663-7 11/15/2012 MJSL ADDED 38mm DEMA NECK FINISH 8/29/2013 SPKM 100gr WAS 120gr, 131.9 WAS 131.2, 2.350 WAS 2.186,
2.890 WAS 2.776 5/12/2017 SPK
N130 gr WAS 100 gr, 130.9 WAS 131.9, 2.104 WAS 2.350,
2.719 WAS 2.890, ZELLER NECK WAS SHOWN ON CONTAINER, .796 WAS .800, 11.770 WAS 11.774
8/19/2017 SPK
P WEIGHT WAS 130 +/- 5 grams 11/20/2017 MJSR ADDED 38mm EXLOK NECK FINISH 2/16/2018 BRH
Drawing Number: REV
Drawn By:
Checked:
Reference Materials:
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMID-AMERICA MACHINING, INC. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMID-AMERICA MACHINING, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
Description:
SHEET1 OF 1
Scale:
KDG
1:1
Product Drawing
Date: 10/10/07
10/10/07Date:
Size:D
MA8014-2 & Customer Sample
R128 oz Industrial Round
SPK
Customer:
Container Data:
Fill Level
Overflow
Weight
CKS
Material
Job# : 7661HDPE130.9 oz
95-135 grams128.0 oz
MA8014-162Avg. Wall Thickness
2-Gallon Universal Round Container with Gasketed EZ Cover®
Multiple UsesDry ProductsLiquid Products
Product CodesContainer: Ropak R2U Pail
Description: 2-gallon round pail
Cover:T2GRDescription: Tamper-evident, round EZ Cover®
5.0-Gallon 90 mil LBR Pail with Standard Tear Skirt Cover *Note: Available with UN-Solids Y27/S rating for Packaging Group II and III (USA & Canada)
Multiple Uses Product Codes Dry Products Pail: 5500 Series, 55100 Liquid Products Description: 5.0-gallon LBR Pail Cover: 6500 Series Description: Tear Skirt Cover, Standard Note: *Multiple fitting and venting options available Features Gauge: 90 mil Nominal capacity: 5.0 USG / 19.0 L Stack performance: 350 lbs.* Tare weights: Body: 2.08 lbs. / 948 gr. Cover: .66 lbs. / 300 gr. Note: *Ratings will be reduced with uneven load distribution. Specifications with Cover Dimensions: 12 3/8” D. X 14 11/16” H Maximum capacity: 5.3 USG / 21.2L Tare weight: 2.74 lbs. / 1.25 kgs. Colors Standard: White, Black and Natural Custom: Available at manufacturer’s discretion Decorating Options Four color offset printing Print area: 33"W X 8-1/2"H Sleeve or pressure sensitive labeling
Materials FDA approved materials Resin: Body: High-Density Polyethylene (HDPE) Cover: High-Density Polyethylene (HDPE) MSDS Sheets available upon request Optional Carrying Handle – Wire or Plastic