Lighting Luminairies B-LTG-25 Polar Diagram (Scale: cd/klm) MFW/193/IIC-IEC Ex'd', IIC, IP-66° FLP/WP. Integral / Non-integral Wellglass Luminary TECHNICAL DATA Enclosure Type Protection Class Temp. Class Construction Rating Glass Wireguard Reflector Gasket Component Holder Terminal Cable Entry Mounting Hinge Arrangement Hardware Finishing Name Plate Ex-'d',' Class-1, Zone/Division-1, Gas Groups IIC, hazardous area application confirming to IS/IEC: 60079-1 (Latest Edition). Weatherproof IP-66° confirming to IS/IEC: 60529. Up to T-3 or better. Cast aluminium alloy LM-6. Suitable for 80/125W. HPMV or 70W. HPSV or 70/150W. MH lor 3x26W. CFL/PL Series lamp at 240V. AC. (Integral type) or 300W. GLS. Or 250W. HPMV/HPSV/MH or 150W HPSV Lamp at 240V.AC. (Non-Integral type or 20/30/60/85W.LVD Induction Lamp at 240V. AC.). Clear Heat & Impact resistant Toughened "FLEXPRO" glass dome, confirming to IS/IEC : 60079-0. MS, duly Galvanised / Epoxy powder coated. Internal : Aluminium anodised. External : Aluminium white epoxy powder coated (Optional). Endless neoprene rubber. Built in heavy duty ployester filled, copper wound ballast, power factor condenser and HRC fuse (optional). ES type, Porcelain, Shock proof. Stud type / Cage Clamp type. 1/2 Nos. M20 (F). Top 3/4" BSP (F) blind hole for suspension/mounting. MS, duly Galvanised / Epoxy powder coated. 1 No. inside & 2 Nos. outside, screws duly marked. High Tensile M. Steel duly cadmium plated. Epoxy coated as per shade 632 of IS-5, or shade 631 on request. Detailed Name & Rating plate along-with warning inscription label as per IS. By way of "J" type Hook, Lumens Output with 125W. HPMV Lamp ERTL : CCE/PESO : BIS : DGMS : 199 (for oil mines) CM/L-0708044 CIMFR/TC/P/H702+CIMFR/TC/S/1092 P295191/12 INTEGRAL WELLGLASS NON-INTEGRAL WELLGLASS
11
Embed
6 Sec Lighting Lum C-KK - flexproltd.com_MFW... · lor 3x26W. CFL/PL Series lamp at 240V. AC. (Integral type) or 300W. GLS. Or 250W. HPMV/HPSV/MH or 150W HPSV Lamp at 240V. AC. (Non-Integral
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
L i g h t i n g L u m i n a i r i e s
B-LTG-25
Polar Diagram (Scale: cd/klm)
MFW/193/IIC-IEC
Ex'd', IIC, IP-66° FLP/WP.
Integral / Non-integral Wellglass Luminary
TECHNICAL DATAEnclosure Type
Protection Class
Temp. Class
Construction
Rating
Glass
Wireguard
Reflector
Gasket
Component
Holder
Terminal
Cable Entry
Mounting
Hinge Arrangement
Hardware
Finishing
Name Plate
Ex-'d',' Class-1, Zone/Division-1, Gas Groups IIC,hazardous area application confirming to IS/IEC:60079-1 (Latest Edition).
Weatherproof IP-66° confirming to IS/IEC: 60529.
Up to T-3 or better.
Cast aluminium alloy LM-6.
Suitable for 80/125W. HPMV or 70W. HPSV or 70/150W. MHlor 3x26W. CFL/PL Series lamp at 240V. AC. (Integral type) or300W. GLS. Or 250W. HPMV/HPSV/MH or 150W HPSV Lampat 240V. AC. (Non-Integral type or 20/30/60/85W.LVD InductionLamp at 240V. AC.).