5178234-100

5178234-100Rev 2 2006-2007, General Electric Company,All Rights Reserved.

GE Healthcare

Chilin 19" Color LCD Monitor Option InstallationService Documentation

GE HEALTHCAREDIRECTION 5178234-100, REVISION 2 CHILIN 19" COLOR LCD MONITOR OPTION INSTALLATION

Page 2

GE HEALTHCARE DIRECTION 5178234-100, REVISION 2 CHILIN 19" COLOR LCD MONITOR OPTION INSTALLATION

Legal Notes Page 3

LEGAL NOTES

TRADEMARKSAdobe, the Adobe logo, Acrobat, the Acrobat logo, Exchange, and PostScript are trademarks of Adobe Systems Incorporated or its subsidiaries and may be registered in certain jurisdictions. Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation.All other products and their name brands are trademarks of their respective holders.

COPYRIGHTSAll Material, Copyright 2006-2007 by General Electric Company, Inc. All rights reserved.


Page 4 Legal Notes


IMPORTANT PRECAUTIONS Page 5

IMPORTANT PRECAUTIONS

LANGUAGE

(ZH-CN)

VSTRAHA (CS)

ADVARSEL (DA)

WAARSCHUWING (NL)

TENTO PROVOZN NVOD EXISTUJE POUZE V ANGLICKM JAZYCE. V PPAD, E EXTERN SLUBA ZKAZNKM POTEBUJE NVOD V

JINM JAZYCE, JE ZAJITN PEKLADU DO ODPOVDAJCHO JAZYKA KOLEM ZKAZNKA.

NESNATE SE O DRBU TOHOTO ZAZEN, ANI BYSTE SI PEETLI TENTO PROVOZN NVOD A POCHOPILI JEHO OBSAH.

V PPAD NEDODROVN TTO VSTRAHY ME DOJT K PORANN PRACOVNKA PRODEJNHO SERVISU, OBSLUNHO PERSONLU NEBO PACIENT VLIVEM ELEKTRICKHOP PROUDU, RESPEKTIVE VLIVEM MECHANICKCH I JINCH RIZIK.

DENNE SERVICEMANUAL FINDES KUN P ENGELSK. HVIS EN KUNDES TEKNIKER HAR BRUG FOR ET ANDET SPROG END

ENGELSK, ER DET KUNDENS ANSVAR AT SRGE FOR OVERSTTELSE.

FORSG IKKE AT SERVICERE UDSTYRET MEDMINDRE DENNE SERVICEMANUAL HAR VRET KONSULTERET OG ER FORSTET.

MANGLENDE OVERHOLDELSE AF DENNE ADVARSEL KAN MEDFRE SKADE P GRUND AF ELEKTRISK, MEKANISK ELLER ANDEN FARE FOR TEKNIKEREN, OPERATREN ELLER PATIENTEN.

DEZE ONDERHOUDSHANDLEIDING IS ENKEL IN HET ENGELS VERKRIJGBAAR.

ALS HET ONDERHOUDSPERSONEEL EEN ANDERE TAAL VEREIST, DAN IS DE KLANT VERANTWOORDELIJK VOOR DE VERTALING ERVAN.

PROBEER DE APPARATUUR NIET TE ONDERHOUDEN VOORDAT DEZE ONDERHOUDSHANDLEIDING WERD GERAADPLEEGD EN BEGREPEN IS.

INDIEN DEZE WAARSCHUWING NIET WORDT OPGEVOLGD, ZOU HET ONDERHOUDSPERSONEEL, DE OPERATOR OF EEN PATINT GEWOND KUNNEN RAKEN ALS GEVOLG VAN EEN ELEKTRISCHE SCHOK, MECHANISCHE OF ANDERE GEVAREN.

GE HEALTHCARE CT/E DUAL, PROSPEED AII/FII SERIESDIRECTION 5178234-100, REVISION 2 CHILIN 19" COLOR LCD MONITOR OPTION INSTALLATION

Page 6 IMPORTANT PRECAUTIONS

THIS SERVICE MANUAL IS AVAILABLE IN ENGLISH ONLY. IF A CUSTOMERS SERVICE PROVIDER REQUIRES A LANGUAGE

OTHER THAN ENGLISH, IT IS THE CUSTOMERS RESPONSIBILITY TO PROVIDE TRANSLATION SERVICES.

DO NOT ATTEMPT TO SERVICE THE EQUIPMENT UNLESS THIS SERVICE MANUAL HAS BEEN CONSULTED AND IS UNDERSTOOD.

FAILURE TO HEED THIS WARNING MAY RESULT IN INJURY TO THE SERVICE PROVIDER, OPERATOR OR PATIENT FROM ELECTRIC SHOCK, MECHANICAL OR OTHER HAZARDS.

CE MANUEL DE MAINTENANCE NEST DISPONIBLE QUEN ANGLAIS. SI LE TECHNICIEN DU CLIENT A BESOIN DE CE MANUEL DANS UNE

AUTRE LANGUE QUE LANGLAIS, CEST AU CLIENT QUIL INCOMBE DE LE FAIRE TRADUIRE.

NE PAS TENTER DINTERVENTION SUR LES QUIPEMENTS TANT QUE LE MANUEL SERVICE NA PAS T CONSULT ET COMPRIS.

LE NON-RESPECT DE CET AVERTISSEMENT PEUT ENTRANER CHEZ LE TECHNICIEN, LOPRATEUR OU LE PATIENT DES BLESSURES DUES DES DANGERS LECTRIQUES, MCANIQUES OU AUTRES.

WARNING (EN)

HOIATUS (ET)

VAROITUS (FI)

ATTENTION (FR)

KESOLEV TEENINDUSJUHEND ON SAADAVAL AINULT INGLISE KEELES. KUI KLIENDITEENINDUSE OSUTAJA NUAB JUHENDIT INGLISE KEELEST

ERINEVAS KEELES, VASTUTAB KLIENT TLKETEENUSE OSUTAMISE EEST.

RGE RITAGE SEADMEID TEENINDADA ENNE EELNEVALT KESOLEVA TEENINDUSJUHENDIGA TUTVUMIST JA SELLEST ARU SAAMIST.

KESOLEVA HOIATUSE EIRAMINE VIB PHJUSTADA TEENUSEOSUTAJA, OPERAATORI VI PATSIENDI VIGASTAMIST ELEKTRILGI, MEHAANILISE VI MUU OHU TAGAJRJEL.

TM HUOLTO-OHJE ON SAATAVILLA VAIN ENGLANNIKSI. JOS ASIAKKAAN HUOLTOHENKILST VAATII MUUTA KUIN

ENGLANNINKIELIST MATERIAALIA, TARVITTAVAN KNNKSEN HANKKIMINEN ON ASIAKKAAN VASTUULLA.

L YRIT KORJATA LAITTEISTOA ENNEN KUIN OLET VARMASTI LUKENUT JA YMMRTNYT TMN HUOLTO-OHJEEN.

MIKLI TT VAROITUSTA EI NOUDATETA, SEURAUKSENA VOI OLLA HUOLTOHENKILSTN, LAITTEISTON KYTTJN TAI POTILAAN VAHINGOITTUMINEN SHKISKUN, MEKAANISEN VIAN TAI MUUN VAARATILANTEEN VUOKSI.



WARNUNG (DE)

(EL)

FIGYELMEZTETS (HU)

AVRUN (IS)

DIESE SERVICEANLEITUNG EXISTIERT NUR IN ENGLISCHER SPRACHE. FALLS EIN FREMDER KUNDENDIENST EINE ANDERE SPRACHE BENTIGT,

IST ES AUFGABE DES KUNDEN FR EINE ENTSPRECHENDE BERSETZUNG ZU SORGEN.

VERSUCHEN SIE NICHT DIESE ANLAGE ZU WARTEN, OHNE DIESE SERVICEANLEITUNG GELESEN UND VERSTANDEN ZU HABEN.

WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN DURCH STROMSCHLGE, MECHANISCHE ODER SONSTIGE GEFAHREN KOMMEN.

.

, .

.

, , , .

EZEN KARBANTARTSI KZIKNYV KIZRLAG ANGOL NYELVEN RHET EL.

HA A VEV SZOLGLTATJA ANGOLTL ELTR NYELVRE TART IGNYT, AKKOR A VEV FELELSSGE A FORDTS ELKSZTTETSE.

NE PRBLJA ELKEZDENI HASZNLNI A BERENDEZST, AMG A KARBANTARTSI KZIKNYVBEN LERTAKAT NEM RTELMEZTK.

EZEN FIGYELMEZTETS FIGYELMEN KVL HAGYSA A SZOLGLTAT, MKDTET VAGY A BETEG RAMTS, MECHANIKAI VAGY EGYB VESZLYHELYZET MIATTI SRLST EREDMNYEZHETI.

ESSI JNUSTUHANDBK ER EINGNGU FANLEG ENSKU. EF A JNUSTUVEITANDI VISKIPTAMANNS ARFNAST ANNAS

TUNGUMLS EN ENSKU, ER A SKYLDA VISKIPTAMANNS A SKAFFA TUNGUMLAJNUSTU.

REYNI EKKI A AFGREIA TKI NEMA A ESSI JNUSTUHANDBK HEFUR VERI SKOU OG SKILIN.

BROT SINNA ESSARI AVRUN GETUR LEITT TIL MEISLA JNUSTUVEITANDA, STJRNANDA EA SJKLINGS FR RAFLOSTI, VLRNU EA RUM HTTUM.



IL PRESENTE MANUALE DI MANUTENZIONE DISPONIBILE SOLTANTO IN INGLESE.

SE UN ADDETTO ALLA MANUTENZIONE ESTERNO ALLA GEMS RICHIEDE IL MANUALE IN UNA LINGUA DIVERSA, IL CLIENTE TENUTO A PROVVEDERE DIRETTAMENTE ALLA TRADUZIONE.

SI PROCEDA ALLA MANUTENZIONE DELLAPPARECCHIATURA SOLO DOPO AVER CONSULTATO IL PRESENTE MANUALE ED AVERNE COMPRESO IL CONTENUTO.

IL NON RISPETTO DELLA PRESENTE AVVERTENZA POTREBBE FAR COMPIERE OPERAZIONI DA CUI DERIVINO LESIONI ALLADDETTO ALLA MANUTENZIONE, ALLUTILIZZATORE ED AL PAZIENTE PER FOLGORAZIONE ELETTRICA, PER URTI MECCANICI OD ALTRI RISCHI.

AVVERTENZA (IT)

(JA)

(KO)

. ,

.

. ,

, .



BRDINJUMS (LV)

SPJIMAS (LT)

ADVARSEL (NO)

OSTRZEENIE (PL)

IS EKSPLOATAVIMO VADOVAS YRA PRIEINAMAS TIK ANGL KALBA. JEI KLIENTO PASLAUG TIEKJAS REIKALAUJA VADOVO KITA KALBA NE

ANGL, NUMATYTI VERTIMO PASLAUGAS YRA KLIENTO ATSAKOMYB.

NEMGINKITE ATLIKTI RANGOS TECHNINS PRIEIROS, NEBENT ATSIVELGTE EKSPLOATAVIMO VADOV IR J SUPRATOTE.

JEI NEATKREIPSITE DMESIO PERSPJIM, GALIMI SUALOJIMAI DL ELEKTROS OKO.

MECHANINI AR KIT PAVOJ PASLAUG TIEKJUI, OPERATORIUI AR PACIENTUI.

DENNE SERVICEHNDBOKEN FINNES BARE P ENGELSK. HVIS KUNDENS SERVICELEVERANDR TRENGER ET ANNET SPRK, ER

DET KUNDENS ANSVAR SRGE FOR OVERSETTELSE.

IKKE FORSK REPARERE UTSTYRET UTEN AT DENNE SERVICEHNDBOKEN ER LEST OG FORSTTT.

MANGLENDE HENSYN TIL DENNE ADVARSELEN KAN FRE TIL AT SERVICELEVERANDREN, OPERATREN ELLER PASIENTEN SKADES P GRUNN AV ELEKTRISK STT, MEKANISKE ELLER ANDRE FARER.

NINIEJSZY PODRCZNIK SERWISOWY DOSTPNY JEST JEDYNIE W JZYKU ANGIELSKIM.

JELI DOSTAWCA USUG KLIENTA WYMAGA JZYKA INNEGO NI ANGIELSKI, ZAPEWNIENIE USUGI TUMACZENIA JEST OBOWIZKIEM KLIENTA.

NIE PRBOWA SERWISOWA WYPOSAENIA BEZ ZAPOZNANIA SI I ZROZUMIENIA NINIEJSZEGO PODRCZNIKA SERWISOWEGO.

NIEZASTOSOWANIE SI DO TEGO OSTRZEENIA MOE SPOWODOWA URAZY DOSTAWCY USUG, OPERATORA LUB PACJENTA W WYNIKU PORAENIA ELEKTRYCZNEGO, ZAGROENIA MECHANICZNEGO BD INNEGO.

APKALPES ROKASGRMATA IR PIEEJAMA TIKAI ANGU VALOD. JA KLIENTA APKALPES SNIEDZJAM NEPIECIEAMA INFORMCIJA CIT

VALOD, NEVIS ANGU, KLIENTA PIENKUMS IR NODROINT TULKOANU.

NEVEICIET APRKOJUMA APKALPI BEZ APKALPES ROKASGRMATAS IZLASANAS UN SAPRAANAS.

BRDINJUMA NEIEVROANA VAR RADT ELEKTRISKS STRVAS TRIECIENA, MEHNISKU VAI CITU RISKU IZRAISTU TRAUMU APKALPES SNIEDZJAM, OPERATORAM VAI PACIENTAM.



ATENO (PT)

ATENIE (RO)

! (RU)

UPOZORNENIE (SK)

ESTE MANUAL DE ASSISTNCIA TCNICA S SE ENCONTRA DISPONVEL EM INGLS.

SE QUALQUER OUTRO SERVIO DE ASSISTNCIA TCNICA, QUE NO A GEMS, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA, DA RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIOS DE TRADUO.

NO TENTE REPARAR O EQUIPAMENTO SEM TER CONSULTADO E COMPREENDIDO ESTE MANUAL DE ASSISTNCIA TCNICA

O NO CUMPRIMENTO DESTE AVISO PODE POR EM PERIGO A SEGURANADO TCNICO, OPERADOR OU PACIENTE DEVIDO A CHOQUES ELTRICOS, MECNICOS OU OUTROS.

ACEST MANUAL DE SERVICE ESTE DISPONIBIL NUMAI N LIMBA ENGLEZ. DAC UN FURNIZOR DE SERVICII PENTRU CLIENI NECESIT O ALT

LIMB DECT CEA ENGLEZ, ESTE DE DATORIA CLIENTULUI S FURNIZEZE O TRADUCERE.

NU NCERCAI S REPARAI ECHIPAMENTUL DECT ULTERIOR CONSULTRII I NELEGERII ACESTUI MANUAL DE SERVICE.

IGNORAREA ACESTUI AVERTISMENT AR PUTEA DUCE LA RNIREA DEPANATORULUI, OPERATORULUI SAU PACIENTULUI N URMA PERICOLELOR DE ELECTROCUTARE, MECANICE SAU DE ALT NATUR.

.

, - , .

.

, , , .

TENTO NVOD NA OBSLUHU JE K DISPOZCII LEN V ANGLITINE. AK ZKAZNKOV POSKYTOVATE SLUIEB VYADUJE IN JAZYK AKO

ANGLITINU, POSKYTNUTIE PREKLADATESKCH SLUIEB JE ZODPOVEDNOSOU ZKAZNKA.

NEPOKAJTE SA O OBSLUHU ZARIADENIA SKR, AKO SI NEPRETATE NVOD NA OBLUHU A NEPOROZUMIETE MU.

ZANEDBANIE TOHTO UPOZORNENIA ME VYSTI DO ZRANENIA POSKYTOVATEA SLUIEB, OBSLUHUJCEJ OSOBY ALEBO PACIENTA ELEKTRICKM PRDOM, DO MECHANICKHO ALEBO INHO NEBEZPEENSTVA.



ATENCION (ES)

VARNING (SV)

DKKAT (TR)

ESTE MANUAL DE SERVICIO SOLO EXISTE EN INGLES. SI ALGUN PROVEEDOR DE SERVICIOS AJENO A GEMS SOLICITA UN IDIOMA

QUE NO SEA EL INGLES, ES RESPONSABILIDAD DEL CLIENTE OFRECER UN SERVICIO DE TRADUCCION.

NO SE DEBERA DAR SERVICIO TECNICO AL EQUIPO, SIN HABER CONSULTADO Y COMPRENDIDO ESTE MANUAL DE SERVICIO.

LA NO OBSERVANCIA DEL PRESENTE AVISO PUEDE DAR LUGAR A QUE EL PROVEEDOR DE SERVICIOS, EL OPERADOR O EL PACIENTE SUFRAN LESIONES PROVOCADAS POR CAUSAS ELCTRICAS, MECNICAS O DE OTRA NATURALEZA.

DEN HR SERVICEHANDBOKEN FINNS BARA TILLGNGLIG P ENGELSKA. OM EN KUNDS SERVICETEKNIKER HAR BEHOV AV ETT ANNAT SPRK N

ENGELSKA ANSVARAR KUNDEN FR ATT TILLHANDAHLLA VERSTTNINGSTJNSTER.

FRSK INTE UTFRA SERVICE P UTRUSTNINGEN OM DU INTE HAR LST OCH FRSTR DEN HR SERVICEHANDBOKEN.

OM DU INTE TAR HNSYN TILL DEN HR VARNINGEN KAN DET RESULTERA I SKADOR P SERVICETEKNIKERN, OPERATREN ELLER PATIENTEN TILL FLJD AV ELEKTRISKA STTAR, MEKANISKA FAROR ELLER ANDRA FAROR.

BU SERVS KILAVUZUNUN SADECE NGLZCES MEVCUTTUR. EER MTER TEKNSYEN BU KILAVUZU NGLZCE DIINDA BR BAKA

LSANDAN TALEP EDERSE, BUNU TERCME ETTRMEK MTERYE DER.

SERVS KILAVUZUNU OKUYUP ANLAMADAN EKPMANLARA MDAHALE ETMEYNZ.

BU UYARIYA UYULMAMASI, ELEKTRK, MEKANK VEYA DER TEHLKELERDEN DOLAYI TEKNSYEN, OPERATR VEYA HASTANIN YARALANMASINA YOL AABLR.



DAMAGE IN TRANSPORTATIONAll packages should be closely examined at time of delivery. If damage is apparent write Damage In Shipment on ALL copies of the freight or express bill BEFORE delivery is accepted or signed for by a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the contents and containers held for inspection by the carrier. A transportation company will not pay a claim for damage if an inspection is not requested within this 14 day period.To file a report:Fill out a report on http://egems.med.ge.com/edq/home.jspContact the local service coordinator.

CERTIFIED ELECTRICAL CONTRACTOR STATEMENTAll electrical Installations that are preliminary to positioning of the equipment at the site prepared for the equipment shall be performed by licensed electrical contractors. In addition, electrical feeds into the Power Distribution Unit shall be performed by licensed electrical contractors. Other connections between pieces of electrical equipment, calibrations and testing shall be performed by qualified GE Medical personnel. The products involved (and the accompanying electrical installations) are highly sophisticated, and special engineering competence is required. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GEs electrical work on these products will comply with the requirements of the applicable electrical codes.The purchaser of GE equipment shall only utilize qualified personnel (i.e., GEs field engineers, personnel of third-party service companies with equivalent training, or licensed electricians) to perform electrical servicing on the equipment.

IMPORTANT...X-RAY PROTECTIONX-ray equipment if not properly used may cause injury. Accordingly, the instructions herein contained should be thoroughly read and understood by everyone who will use the equipment before you attempt to place this equipment in operation. The General Electric Company, Medical Systems Group, will be glad to assist and cooperate in placing this equipment in use.Although this apparatus incorporates a high degree of protection against x-radiation other than the useful beam, no practical design of equipment can provide complete protection. Nor can any practical design compel the operator to take adequate precautions to prevent the possibility of any persons carelessly exposing themselves or others to radiation.It is important that anyone having anything to do with x-radiation be properly trained and fully acquainted with the recommendations of the National Council on Radiation Protection and Measurements as published in NCRP Reports available from NCRP Publications, 7910 Woodmont Avenue, Room 1016, Bethesda, Maryland 20814, and of the International Commission on Radiation Protection, and take adequate steps to protect against injury.The equipment is sold with the understanding that the General Electric Company, Medical Systems Group, its agents, and representatives have no responsibility for injury or damage which may result from improper use of the equipment.Various protective materials and devices are available. It is urged that such materials or devices be used.

LITHIUM BATTERY CAUTIONARY STATEMENTS

CAUTIONRisk of

Explosion

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions.



ATTENTIONDanger

dExplosion

Il y a danger dexplosion sil y a replacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type recommand par le constructeur. Mettre au rbut les batteries usages conformment aux instructions du fabricant.

OMISSIONS & ERRORSCustomers, please contact your GE Sales or Service representatives. GE personnel, please use the GEMS CQA Process to report all omissions, errors, and defects in this publication.


Revision History Page 15

Rev

isio

n H

isto

ry

Revision History

Revision Date Reason for change1 10/25/06 initial release.2 06/07/06 Added Section 4 Disposal: warning for statement about Hg in device.


Page 16 Revision History


Table of Contents Page 17

Tabl

e of

Con

tent

s

Table of ContentsChapter 1Introduction............................................................................................................ 19

Section 1.0System Requirement........................................................................................ 19Section 2.0Material List ...................................................................................................... 19Section 3.0Flowchart .......................................................................................................... 20

Chapter 2Installation Procedure........................................................................................... 21

Section 1.0Overview ........................................................................................................... 21Section 2.0Installation Procedure...................................................................................... 212.1 EXISTING MONITOR REMOVAL (IF THERE IS A MONITOR TO BE REPLACED)...... 212.2 Monitor Connection.......................................................................................................... 212.3 General Procedures for Setup ......................................................................................... 26

2.3.1 OSD (On-Screen-Display) Controls.................................................................... 262.3.2 Main Menu .......................................................................................................... 272.3.3 OSD Function ..................................................................................................... 272.3.4 Lock Mode Explain ............................................................................................. 292.3.5 Hot Key Controls................................................................................................. 302.3.6 Contrast and Brightness Minor Adjustment ........................................................ 31

Section 3.0Function Check ................................................................................................ 32Section 4.0Disposal ............................................................................................................ 32

Chapter 3 Finish Installation .................................................................................................. 33

Section 1.0Attach Rating Plate .......................................................................................... 33Section 2.0Return Installation Card................................................................................... 34


Page 18 Table of Contents


Chapter 1 - Introduction Page 19

1 - I

ntro

duct

ion

Chapter 1Introduction

Section 1.0System Requirement

This option is available for all Systems.

Section 2.0Material List

Verify that the contents of this option kit are correct according to the Material List below.

Chilin 19" Color LCD Monitor Option Kit (5128434-2)

Chilin 19" Color LCD Monitor Option Kit_Black (5128434-3)

ITEM PART NO. DESCRIPTION QTY.1 5178602 Chilin 19" Color LCD Monitor 1

2 2111577 Rating Plate 1

3 5178234-100 Option Installation Manual (This Manual) 1

ITEM PART NO. DESCRIPTION QTY.1 5178602-2 Chilin 19" Color LCD Monitor - Black 1

2 2111577 Rating Plate 1

3 5178234-100 Option Installation Manual (This Manual) 1


Page 20 Section 3.0 - Flowchart

Section 3.0Flowchart

The Illustration below shows the main flow of the installation procedures of the option.

START

END

Monitor Installation

Preparation

Functional Check


Chapter 2 - Installation Procedure Page 21

2

INST

ALL

ATI

ON

PR

OC

EDU

RE

Chapter 2Installation Procedure

Section 1.0Overview

This instruction describes the hardware installation procedure.

Section 2.0Installation Procedure

2.1 EXISTING MONITOR REMOVAL (IF THERE IS A MONITOR TO BE REPLACED)

Understand and follow the Safety Guidelines Manual.

1.) Turn OFF the Operator Console main power.2.) Turn OFF the breaker in the Power Distribution Box (hospital supply).3.) Remove the OC Rear Cover.4.) Disconnect the Signal and Power cables connected from the monitor to the OC.5.) Remove the monitor from the OC (or OC table).

2.2 Monitor Connection

1.) Unpack the LCD monitor and place it on the OC.2.) Route and connect the cables as below illustrations.

Note: For each LCD Monitor we supply two different kinds of Signal Cables. Check the ports of the Display Board before connecting the Signal Cables. Select proper Signal Cable to connect the proper port on the LCD according to different ports of the Display Board.

Figure 2-1 Signal Cable

DVI VGA DVIDVI

VGAVGA


Page 22 Chapter 2 - Installation Procedure

For CT/e, CT ProSpeed AI/FI Series and CT/e Dual, ProSpeed AII/FII Series For HiSpeed Dual (Big OC) For ProSpeed FII (Small OC) For BrightSpeed Series and RT16, Xtra; LS RT

For CT/e, CT ProSpeed AI/FI Series and CT/e Dual, ProSpeed AII/FII Series

a.) Connect the Power cable to the AC Power Supply Assy (or AC Box).b.) Reinstall the Rear Cover.c.) Connect the signal cable to the VSPL (Video Board).d.) Reinstall the Rear Connector Cover.

Figure 2-2 AC Power Cable and Signal Cable Replacement

Connect the MonitorPower cable to the ACPS Assy

Connect the Monitorsignal cable connector

(VGA VGA)

Monitor

1

3

2Reinstall theRear Cover

AC PS Assy(rear view)

Slave Monitor

RearConnector

CoverRearCover

AC PS Assy

Video Board

4Reinstall theRear Connector

Cover



2

INST

ALL

ATI

ON

PR

OC

EDU

RE

For HiSpeed Dual (Big OC)

Figure 2-3 Cables Connection

Figure 2-4 Cables Connection (No VSPL)

HOST ASSY

OC Rear View

REAR CN2

DASIFN2

VSPL

REAR CN1Signal Cable

(VGA VGA)

Rear View

Route the Power Cable through the hole

to connect the AC Box

VGADVI

VGA VGA

Monitor Slave Monitor

Power Cable

HOST ASSY

OC Rear View

REAR CN2

DASIFN2

REAR CN1

Signal Cable

(VGA DVI)

Power Cable

Rear View

Route the Power Cable through the hole

to connect the AC Box

VGADVI

DVI



For ProSpeed FII (Small OC)

Figure 2-5 Cables Connection

Figure 2-6 Cables Connection (No VSPL)

OC Rear View

RE

AR

CN

2

DA

SIF

N2

VS

PL

RE

AR

CN

1

Signal Cable

(VGA VGA)

Power Cable

Rear View

VGADVI

VGA

VGA

OC Rear View

RE

AR

CN

2

DA

SIF

N2

RE

AR

CN

1

Signal Cable

(VGA DVI)

Power Cable

Rear View

VGADVI

Host PC

DVI



2

INST

ALL

ATI

ON

PR

OC

EDU

RE

For BrightSpeed Series and RT16, Xtra; LS RT

3.) Connect the signal cable and power cable to the LCD monitor.

Figure 2-7 Connect Cables to LCD Monitor

4.) Reinstall the OC Rear Cover.5.) Turn ON the main switch located at the back of the LCD monitor.

HOST ASSY

OC Rear View

Power Cable

Signal Cable

(DVI DVI or

VGA DVI)

Route the Power Cables thourgh

the hole to connect the Power Supply

Signal Cable

Connectors

Rear View

VGADVI

Rear View

DVI VGA

Display

Scan

DVI

DVI

Power Cable Signal Cable

Note: Fix the Power Cable with metal clip



2.3 General Procedures for Setup

2.3.1 OSD (On-Screen-Display) Controls

OSD control buttons on the front of the monitor function as follows:

1.) Power on the LCD Medical Display.2.) Press the "MENU" button to start the OSD feature.3.) Press the ">" or "" or "" to selection sub-menu items and increase adjustmentQuick gamma item selection. *

[



2

INST

ALL

ATI

ON

PR

OC

EDU

RE

2.3.2 Main Menu

2.3.3 OSD Function

Options Menu

Brightness

Contrast

Hue

Saturation

Display MenuImage MenuColor Menu

OSD Menu Utility Menu

OSD Control Button State

Operation Explaining

Display Menu

Primary Directory

Secondary Directory Description

Brightness Adjusts the background black level of the screen image.

Contrast Adjusts fore ground white level of the screen image.

Hue Adjusts the purity and depth of the red, blue and green of color.

Saturation Adjusts the saturation of the color.

Auto Adjust Automatically adjusts the Image Position and H. size (or V. size) setting and Fine Settings.

Auto Color Moves the image up and down on the screen.

Phase Adjusts image distortion appearing as horizontal "noise" on the screen.

Clock Adjusts the clock pulse of the image.

H-Position Moves the screen image left or right.

V-Position Moves the screen image up or down.

Display

Image



Gamma Adjusts Gamma value.

Color Temp. Selects color temperature.

Image Size Adjust image size.

Zoom Mode Change the screen size according to the image aspect ratio.

Horizontal Pan Fill the Image left and right on the screen.

Vertical Pan Fill the Image up and down on the screen.

Auto Mode On/Off auto adjust.

LED Mode On/Off LED function.

H-Position Moves the OSD left and right on the screen.

V-Position Moves the OSD up and down on the screen.

Rotation Rotations the OSD.

Time Out Adjusts OSD display time setting.

Language Choose language of the display on the screen.

All Reset Resets the highlighted control menu to the factory setting.

Key Lock Lock OSD function.

Information Shows information of Firmware, Source and Resolution.

Overlapped Setting Value when the image to occur overlapped.

Primary Directory

Secondary Directory Description

Color

Option

OSD

Utility



2

INST

ALL

ATI

ON

PR

OC

EDU

RE

2.3.4 Lock Mode ExplainMDC1900-1LG system default is Off mode.LOCK Off: Function keys are non-lock, press "Menu" key to start the OSD menu and you can

adjustment any functions. Mode 1: All function keys are locked. Mode 2: All function keys are locked unless brightness control. Press "Menu" key to start the

brightness control menu. Operation step as follows:

1.) Press "Menu" key to start OSD freature.2.) Select Setup Menu and press "Enter".

3.) Press "" to select Lock Mode and press "Enter".

4.) Press "" to select Lock Mode and press "Enter" will save the setting value automatically.

SetUp M

All

Lock

Overlapp

Informati

Setup M

All

Overlapp

InformatiLock



5.) When you press any buttons on the front of the display that will shows message "OSD locked" after setting Lock Mode complete and exit OSD feature.

UnlockPress left key "



2

INST

ALL

ATI

ON

PR

OC

EDU

RE

3.) Gamma item SelectionPress" >" (right) button, select Gamma value.

Native: Default. Gamma 1.8: The display state is 1.8 for gamma value. Gamma 2.0: The display state is 2.0 for gamma value. Gamma 2.2: The display state is 2.2 for gamma value. DICOM: The display state is standard for DICOM. User: The display state is by oneself set for gamma value.

2.3.6 Contrast and Brightness Minor Adjustment1.) Select Service Image Quality Install SMPTE image (To install the SMPTE image on

the system.)2.) Click on ImageWorks

3.) Select "SMPTE" image in the Examination list.4.) Click on Viewer to display the SMPTE pattern.5.) Enlarge the SMPTE image to full screen display, using Display Routine Display Zoom.

If necessary, drag the Zoom slider to display the pattern to the full screen.

Native Gamma 1.8 Gamma 2.0

Gamma 2.2DICOMUser



6.) Adjust Contrast and Brightness to the level an user desires so that a slight (not clear) distinction should be made between 0% and 5% and between 95% and 100%.

7.) Also check if the patterns are properly displayed.

Section 3.0Function Check

1.) Perform Power On Self Test:

a.) Switch ON the main switch of the OC.The test progress information is displayed on the monitor.

b.) Verify that the system starts up normally.2.) Perform the normal test scannings and check that the images are normal.

Section 4.0Disposal

WARNING This product consists of devices that may contain mercury, which must be recycled or disposed of in accordance with local, state, or country laws. (Within this system, the backlight lamps in the monitor display contain mercury.)

5%0% 100%

95%


Chapter 3 - Finish Installation Page 33

3

FIN

ISH

IN

STA

LLA

TIO

N

Chapter 3 Finish Installation

Section 1.0Attach Rating Plate

1.) Attach the provided rating plate to the following location of OC.

Figure 3-1 Rating Plate for Big OC

Figure 3-2 Rating Plate for Small OC

OC Rear Side

Label area Rating plate

Rear View

Rating Plate

OC Rating Plate

Option Rating Plate


Page 34 Chapter 3 - Finish Installation

Section 2.0Return Installation Card

1.) Complete and verify the site-specific information on the Red Product Locator Installation Card.2.) Send the Product Locator Card to the appropriate address provided belowl:

- Address for GEMS-AM sites:Send to the address printed on the Product Locator Card.

- Address for GEMS-E sites:Send to the address Printed on the Product Locator Card.

- Address for GEMS-A sites:Send to the local PLS or Service Administrator.

3000 N. Grandview Blvd., Waukesha, WI 53188 U.S.A.

www.gehealthcare.com

Imagination at work

Chilin 19" Color LCD Monitor Option InstallationIMPORTANT PRECAUTIONSRevision HistoryChapter 1 IntroductionSection 1.0 System RequirementSection 2.0 Material ListSection 3.0 Flowchart

Chapter 2 Installation ProcedureSection 1.0 OverviewSection 2.0 Installation Procedure2.1 EXISTING MONITOR REMOVAL (IF THERE IS A MONITOR TO BE REPLACED)2.2 Monitor Connection2.3 General Procedures for Setup2.3.1 OSD (On-Screen-Display) Controls2.3.2 Main Menu2.3.3 OSD Function2.3.4 Lock Mode Explain2.3.5 Hot Key Controls2.3.6 Contrast and Brightness Minor Adjustment

Section 3.0 Function CheckSection 4.0 Disposal

Chapter 3 Finish InstallationSection 1.0 Attach Rating PlateSection 2.0 Return Installation Card

5178234-100

Documents

service manual

customers service provider

general electric company

zou het onderhoudspersoneel

acrobat logo

adobe logo

electric shock

registered trademark