This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
47
ALSCO PVC PIPE - SCHEDULE 80• Full range of IPS sizes in
1/4" - 16" Sch 80.• Choice of plain or
belled ends
NOTE: Threaded PVC pipe has a 50 % derating factoron W.P.@ 73°F.
WARNING:PVC products are not recommended for com- pressed air or gas systems.
NOMINAL PART PRICE PART PRICE APPROX. MAX. W.P. O.D. AVERAGE MIN.PIPE SIZE NUMBER PER FT. NUMBER PER FT. WT. / FT. @73.4ºF (IN.) I.D. WALLIN. (mm) PE $ BE $ LBS. (IN.) (IN.)
PVC and CPVC piping products ARE NOT RECOMMENDED for systems which transport or store compressedair or gases. Testing PVC or CPVC piping products with compressed air or gases is also NOT RECOMMENDED.
NSF STANDARD 14 and 61 ASTM D-1784 - MATERIAL
ASTM D-1785 - DIMENSIONS Type I, Grade 1 (cell class 12454-B)
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
PVC and CPVC piping products ARE NOT RECOMMENDED for systems which transportor store compressed air or gases. Testing these products is also NOT RECOMMENDED.
49
ALSCO PVC Fittings - Schedule 80
IPS produces a wide range of high strength WELD-ON® solvent cements for rigid and
flexible PVC pipe and fittings. Light, medium, heavy and extra heavy bodied cements
are specifically formulated for PVC pipe in virtually every schedule, up to large diame-
ter pipe, and in a variety of job tailored cure times. These products are ideal for use
with potable water pressure systems, irrigation, turf irrigation, gas, conduit, industrial
piping, sewer and drain, waste and vent systems.
For Cements and Primers see pages 83-86
Cement and Primer see pages 83-86
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Female AdapterSocket x FPT
Size Inch Part # Price1/4 835-002 2.413/8 835-003 2.411/2 835-005 1.333/4 835-007 1.981 835-010 2.92
1 1/4 835-012 4.731 1/2 835-015 5.80
2 835-020 10.112 1/2 835-025 15.96
3 835-030 17.974 835-040 30.88
CapFPT
Size Inch Part # Price1/4 848-002 1.743/8 848-003 1.741/2 848-005 1.743/4 848-007 1.951 848-010 2.46
1 1/4 848-012 2.931 1/2 848-015 3.34
2 848-020 6.562 1/2 848-025 13.13
3 848-030 15.464 848-040 27.23
WyeSocket
Size Inch Part # Price1/2 875-005 3.263/4 875-007 3.421 875-010 5.48
Size Inch Part # Price1/4 850-002 $ 1.503/8 850-003 1.501/2 850-005 1.343/4 850-007 1.401 850-010 1.71
1 1/4 850-012 2.511 1/2 850-015 3.06
2 850-020 3.142 1/2 850-025 8.77
3 850-030 10.234 850-040 19.926 850-060 23.68
50
ALSCO PVC Fittings - SCHEDULE 80
Part # Size Inch Price
801-101 3/4 x 3/4 x 1/2 1.70801-130 1 x 1 x1/2x 1/2 2.46 801-131 1 x 1 x 3/4 2.46801-157 1 1/4 x 1 x 3/4 4.06801-168 1 1/4 x 1 1/4 x 1 5.33801-202 1 1/2 x 1 1/4 x 1 5.33801-210 1 1/2 x 1 1/2 x 3/4 5.33801-211 1 1/2 x 1 1/2 x 1 5.33801-212 1 1/2 x 1 1/2 x 1 1/4 5.33801-247 2 x 2 1/2 6.76801-248 2 x 2 x 3/4 6.76801-249 2 x 2 x 1 6.76801-251 2 x 2 x 1 1/2 6.76801-338 3 x 3 x 2 12.39801-420 4 x 4 x 2 20.02801-422 4 x 4 x 3 20.02801-532 6 x 6 x 4 53.70
See our Nut and BoltKits on page 56 for plastic flanged applications
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Part # Dia.x Length Price879-005 1/8” x Close .65879-015 1/8” x 1 1/2” .76879-020 1/8” x 2” .86879-025 1/8” x 2 1/2” .90879-030 1/8” x 3” .90879-035 1/8” x 3 1/2” 1.00879-040 1/8” x 4” 1.00879-045 1/8” x 4 1/2” 1.13879-050 1/8” x 5” 1.13879-055 1/8” x 5 1/2” 1.29879-060 1/8” x 6” 1.29879-070 1/8” x 7” 1.50879-080 1/8” x 8” 1.71879-090 1/8” x 9” 1.79879-100 1/8” x 10” 2.06879-110 1/8” x 11” 2.23879-120 1/8” X 12” 2.23
Part # Dia.x Length Price880-005 1/4” x Close .60880-015 1/4” x 1 1/2” .65880-020 1/4” x 2” .65880-025 1/4” x 2 1/2” .96880-030 1/4” x 3” .96880-035 1/4” x 3 1/2” 1.29880-040 1/4” x 4” 1.29880-045 1/4” x 4 1/2” 1.50880-050 1/4” x 5” 1.50880-055 1/4” x 5 1/2” 1.63880-060 1/4” x 6” 1.63880-070 1/4” x 7” 1.71880-080 1/4” x 8” 1.75880-090 1/4” x 9” 1.90880-100 1/4” x 10” 1.96880-110 1/4” x 11” 2.10880-120 1/4” X 12” 2.21
Part # Dia.x Length Price882-005 1/2” x Close .71882-015 1/2” x 1 1/2” .71882-020 1/2” x 2” .76882-025 1/2” x 2 1/2” .76882-030 1/2” x 3” .86882-035 1/2” x 3 1/2” .86882-040 1/2” x 4” .96882-045 1/2” x 4 1/2” 1.00882-050 1/2” x 5” 1.11882-055 1/2” x 5 1/2” 1.11882-060 1/2” x 6” 1.17882-070 1/2” x 7” 1.36882-080 1/2” x 8” 1.46882-090 1/2” x 9” 1.50882-100 1/2” x 10” 1.60882-110 1/2” x 11” 1.71882-120 1/2” X 12” 1.75
Part # Dia.x Length Price885-005 1 1/4” x Close .65
885-020 1 1/4” x 2” 1.50885-025 1 1/4” x 2 1/2” 1.50885-030 1 1/4” x 3” 1.71885-035 1 1/4” x 3 1/2” 1.96885-040 1 1/4” x 4” 1.96885-045 1 1/4” x 4 1/2” 2.23885-050 1 1/4” x 5” 2.23885-055 1 1/4” x 5 1/2” 2.50885-060 1 1/4” x 6” 2.50885-070 1 1/4” x 7” 2.86885-080 1 1/4” x 8” 3.00885-090 1 1/4” x 9” 3.26885-100 1 1/4” x 10” 3.50885-110 1 1/4” x 11” 3.75885-120 1 1/4” X 12” 3.96
Part # Dia.x Length Price
888-005 2 1/2” x Close 7.17888-030 2 1/2” x 3” 8.17888-035 2 1/2” x 3 1/2” 9.34888-040 2 1/2” x 4” 9.34888-045 2 1/2” x 4 1/2” 10.57888-050 2 1/2” x 5” 10.57888-055 2 1/2” x 5 1/2” 11.90888-060 2 1/2” x 6” 11.90888-070 2 1/2” x 7” 13.74888-080 2 1/2” x 8” 14.42888-090 2 1/2” x 9” 15.83888-100 2 1/2” x 10” 16.67888-110 2 1/2” x 11” 19.14888-120 2 1/2” x 12” 19.29
Part # Dia.x Length Price
890-005 4” x Close 13.99
890-040 4” x 4” 14.68890-045 4” x 4 1/2” 15.83890-050 4” x 5” 16.46890-055 4” x 5 1/2” 17.48890-060 4” x 6” 18.30890-070 4” x 7” 20.80890-080 4” x 8” 22.41890-090 4” x 9” 24.15890-100 4” x 10” 25.82890-110 4” x 11” 29.14890-120 4” x 12” 31.61
Part # Dia.x Length Price
889-005 3” x Close 8.57889-030 3” x 3” 9.34889-035 3” x 3 1/2” 10.91889-040 3” x 4” 10.91889-045 3” x 4 1/2” 12.49889-050 3” x 5” 12.49889-055 3” x 5 1/2” 13.99889-060 3” x 6” 13.99889-070 3” x 7” 17.48889-080 3” x 8” 17.48889-090 3” x 9” 19.98889-100 3” x 10” 19.98889-110 3” x 11” 23.29889-120 3” x 12” 23.68
Part # Dia.x Length Price883-005 3/4” x Close .76883-015 3/4” x 1 1/2” .76883-020 3/4” x 2” .76883-025 3/4” x 2 1/2” .86883-030 3/4” x 3” .86883-035 3/4” x 3 1/2” .96883-040 3/4” x 4” 1.00883-045 3/4” x 4 1/2” 1.17883-050 3/4” x 5” 1.17883-055 3/4” x 5 1/2” 1.27883-060 3/4” x 6” 1.46883-070 3/4” x 7” 1.50883-080 3/4” x 8” 1.71883-090 3/4” x 9” 1.75883-100 3/4” x 10” 1.96883-110 3/4” x 11” 2.10883-120 3/4” X 12” 2.21
Part # Dia.x Length Price886-005 1 1/2” x Close 1.60
886-020 1 1/2” x 2” 1.75886-025 1 1/2” x 2 1/2” 1.86886-030 1 1/2” x 3” 2.01886-035 1 1/2” x 3 1/2” 2.23886-040 1 1/2” x 4” 2.23886-045 1 1/2” x 4 1/2” 2.67886-050 1 1/2” x 5” 2.67886-055 1 1/2” x 5 1/2” 3.00886-060 1 1/2” x 6” 3.00886-070 1 1/2” x 7” 3.21886-080 1 1/2” x 8” 3.59886-090 1 1/2” x 9” 3.96886-100 1 1/2” x 10” 4.20886-110 1 1/2” x 11” 4.43886-120 1 1/2” X 12” 4.76
Part # Dia.x Length Price881-005 3/8” x Close .60881-015 3/8” x 1 1/2” .60881-020 3/8” x 2” .76881-025 3/8” x 2 1/2” 1.05881-030 3/8” x 3” 1.05881-035 3/8” x 3 1/2” 1.50881-040 3/8” x 4” 1.50881-045 3/8” x 4 1/2” 1.63881-050 3/8” x 5” 1.63881-055 3/8” x 5 1/2” 1.75881-060 3/8” x 6” 1.75881-070 3/8” x 7” 1.86881-080 3/8” x 8” 2.01881-090 3/8” x 9” 2.16881-100 3/8” x 10” 2.23881-110 3/8” x 11” 2.35881-120 3/8” X 12” 2.50
Part # Dia.x Length Price884-005 1” x Close 1.00
884-020 1” x 2” 1.11884-025 1” x 2 1/2” 1.17884-030 1” x 3” 1.27884-035 1” x 3 1/2” 1.36884-040 1” x 4” 1.46884-045 1” x 4 1/2” 1.60884-050 1” x 5” 1.75884-055 1” x 5 1/2” 1.96884-060 1” x 6” 2.01884-070 1” x 7” 2.21884-080 1” x 8” 2.35884-090 1” x 9” 2.67884-100 1” x 10” 2.78884-110 1” x 11” 3.00884-120 1” X 12” 3.21
Part # Dia.x Length Price887-005 2” x Close 2.10
887-025 2” x 2 1/2” 2.47887-030 2” x 3” 2.50887-035 2” x 3 1/2” 2.92887-040 2” x 4” 2.92887-045 2” x 4 1/2” 3.46887-050 2” x 5” 3.46887-055 2” x 5 1/2” 3.75887-060 2” x 6” 3.75887-070 2” x 7” 4.59887-080 2” x 8” 4.76887-090 2” x 9” 5.08887-100 2” x 10” 5.47887-110 2” x 11” 5.93887-120 2” X 12” 6.22
NIPPLES MPT X MPT THREADED BOTH ENDS
53
ALSCO Bulkhead Fittings - Heavy Duty
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
PVC CPVC PP (For Hole Saws, see below)Hayward Safe-T-Loc Bulkhead Fittings (tank adapters) permit safe, quick pipe connections to plastic, metal, or plastic lined tanks.There are two unique features: First, the exceptionally heavy buttress thread is designed to prevent any possible leakage due to poorthread engagement.Second, the hex shaped body end allows for installation on large tanks with only one person, rather than the usualtwo, saving both time and money. Rated 150 psi and NSF approved. These adapters make inlets and outlets simple: Simply cut theproper hole size in the tank and jam the main body with one gasket from the inside thru the tank wall and tighten the loose nut.
* NOTE: 1/4” & 3/8” are Female NPT on one side only, no connection on opposite side and are not Hayward brand.
These fittings allow tank piping connections to bemade in a straight line without fabricating specialfittings to correct for the curvature of the tank.Using a precision machined ball sealed inside abulkhead fitting housing, the fitting permits connec-tions with an offset angle of up to 27°. Installationis quick. No special tools or fittings are required. ATeflon seal and PVC lock ring provide easy rotationof the ball, with safe, positive sealing. Fittings pro-vide safer, stronger piping connections and workequally well on plastic, metal or plastic lined tanks.Rated at 75 psi @ 70°F non shock. Standardgasket of EPDM, also available Viton and Teflon.
Hayward Self Aligning Bulkhead Fittings
Size End PVC Inch Connection Part # Price
1 Thd. x Thd. 3504 $ 85.552 Thd. x Thd. 3505 129.903 Thd. x Thd. 3506 201.05
ALSCO Bolt Kits for Plastic FlangesALSCO Flange Kits are packaged for use with PVC, CPVC, PP, and PVDF Schedule 80 IPS pipe system. You canselect your Bolt Kit with the gasket of your choice. Our kits are sized based on manufacture of flanges. Otherbrands used, requires matching proper bolt lengths with matching flanges.
ALSCO Flange Kits are packaged for use with GF & ASAHI Metric Piping Systems in PP and PVDF. You can select your Bolt Kit with the gasket of your
choice. Our kits are sized based on manufacture of flanges. Other brands used, requires matching proper bolt lengths with matching flanges.
** With EPDM Filler, ring type 1/8” † 5" gasket available. NOTE: 1) Gaskets are full faced pre-cut to ANSI (150 lb.) B 16-5 dim. and 1/8" thick with 60 - 75 durometer shore 2) Gaskets installed outside without
protection from UV radiation will suffer degradation. ALSCO Nut & Bolt Kits are sized from the information given to us by our manufacturers of flanges. Do not use on another brand please check with Sales.
SELECT THE BOLT KIT AND THE GASKET OF YOUR CHOICE
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Features• Sizes 1/2” thru 12” • Temperature Range: -4° F to 250° F• EPDM (Hardness 65-66, Duratmeter A) PVDF or Teflon®-bonded EPDM• Perfect sealing at low bolt tightening torques gives longer gasket life• Ideal for 150 lb thermoplastic piping systems, also metal or plastic lined metal system
The AV Gaskets offer a unique double-convex ring design that gives optimum sealingwith only 1/8 the torque commonly required with flat-faced gaskets. The PVDF andTeflon®-bonded AV gaskets employ a proprietary laminating process for bonding toEPDM. This produces the greater elasticity required for lower sealing torques.
Size Part # Price Part # Price Part # PriceInch EPDM Ea. Teflon Ea. PVDF Ea.
1/2 3113-005 2.00 3114-005 6.00 3115-005 10.00
3/4 3113-007 2.00 3114-007 7.00 3115-007 11.00
1 3113-010 2.00 3114-010 8.00 3115-010 11.00
1 1/4 3113-012 2.00 3114-012 10.00 - -
1 1/2 3113-015 2.00 3114-015 10.00 3115-015 14.00
2 3113-020 3.00 3114-020 12.00 3115-020 16.00
2 1/2 3113-025 3.00 3114-025 14.00 - -
3 3113-030 3.00 3114-030 18.00 3115-030 25.00
4 3113-040 5.00 3114-040 21.00 3115-040 30.00
6 3113-060 6.00 3114-060 32.00 3115-060 43.00
8 3113-080 8.00 3114-080 40.00 3115-080 72.00
10 3113-100 11.00 3114-100 47.00 3115-100 80.00
12 3113-120 11.00 3114-120 58.00 - -
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
** With EPDM Filler, ring type 1/8” † 5" gasket available. NOTE: 1) Gaskets are full faced pre-cut to ANSI (150 lb.) B 16-5 dim. and 1/8" thick with 60 - 75 durometer shore 2) Gaskets installed outside without
protection from UV radiation will suffer degradation. ALSCO Nut & Bolt Kits are sized from the information given to us by our manufacturers of flanges. Do not use on another brand please check with Sales.
Expansion joints for use in PVC or CPVC piping systems. The PVCcomes in sizes 1/2” to 12” and the CPVC from 1/2” to 10”.An expansion joint consists of two tubes, one telescoping inside the other. The outer tube is to be firmly anchored and the inner tube allowed to move with a piston-like action as the attached pipe expandsor contracts.Since both types of plastic pipe grow with temperature fluctuations, theexpansion joints eliminate the need for expansion loops and permitsrigid mounting between two fixed points. In long runs, the pipe line should be anchored at each change of direction so that movement of the pipe will be directed squarely into the expansion joint. Alignmentof expansion joints is most important, since binding can result if pipeis canted or cocked and does not move in the same plane as the joint.
PVC and CORZAN® (CPVC) Expansion Joints with 6” and 12” Travel
Our all new expansion joint is designed to minimize alignment prob-lems that can cause cocking, leaking, and breakage. Our newdesign features a multi “O” ring system to eliminate leaking and a supported piston to maintain perfect alignment and eliminate cockingor breakage.When used in normal application these multi “O” ring expansion joints require no repair or parts replacement since our unique designincorporates a new wiper system to remove dirt and particles that would normally cause wear to the seal rings.
Molded expansion joints and flexible couplings were spe-cially developed to withstand the higher pressures andtemperatures in today’s piping systems. Each moldedjoint and coupling bellows contains the physical prop-erties required for fatigue-proof operation, including:• Handling Nitric or Sulfuric acid• Accommmodating expansion & contraction in high
temperature (up to 350º F, 177º C)• Providing low spring rates and high flexibility to pro-
tect fragile FRP, PVC or glass pipe from damage causedby expansion, contraction or ambient vibration• The Teflon® is reinforced externally with stainless
steel ring between arches • The Teflon® material is corrosive-proof
Single Sphere Flanged Rubber Expansion JointsConstruction—Nylon fabric-reinforced neoprene bodywith hardened spring wire reinforcement and forgedsteel flanges.Features• Excellent ability to absorb vibration and sound• Allows for four-way movement • Withstands high pressure• Easy installation, using floating flanges• Excellent for use with moderate chemicals & acids,
most oils, fats and grease and many solvents.Not for use with oxidizing acids, esters and ketones
Designed to allow for the expansion, contraction, lateral & angular movement of piping system.• Convenient, Double Union End Connections • Internal Nylon Cord Reinforced Elastomer Bellows Tube• Chemically Resistant Neoprene Elastomer • Pressure Rated to 235 psi @ 73°F• Double spherical Arch Bellows Provides Improved movement • Suitable for Vacuum Service• Available in Socket or Spears Special Reinforced (SR) Female Plastic Thread End Connectors, IPS Sizes 3/4” through 3”
• PVC (Belled Ends) Corrosion resistant• Plain ends available• Sizes 3” through 24” (other sizes avail.)• Easy installation and low maintenance• Also available in PP, CPVC, and Kynar
ALSCO PVC Duct fittings / TigerDuct • Extendo Duct Series
Features / Benefits• Brown or White Polypropylene• Wire Reinforced• High Contractibility• High Extendibility• Self Supporting• Lightweight• Simple Interlock Connection
Custom Molded Cuffs available.
General Applications• Air conditioning • Spot cooling and heating systems• Room air exhaust conveying and
ventilation.• Dust collection • Chemical Fume removal• OEM equipment applications
Service Temperature Range-4°F to 175°F
Polypropylene / Wire Reinforced AIR DUCTING HOSE
Nominal Working Pressure Vacuum Rating Min. Radius Std. Approx. Part # Part # Price
ID OD PSI (Inches Hg) Bending Length Wt. Brown White Per
In. In. 68°F 104°F 68°F 104°F In. 68°F Ft. Lbs./ Ft. PP PP Foot
24 x 24 7938 $ 1117.6930 x 30 7939 1519.9536 x 36 7940 1698.7742 x 42 7941 1832.9348 x 48 7942 2101.1654 x 54 7943 2168.1160 x 60 7944 2458.7972 x 66 7945 2749.35
Note: Many other sizes are available.
Rear Exhaust - Double SlotLength (in) Part # Price
10 x 8 7948 68.7512 x 10 7949 77.4414 x 12 7950 109.5716 x 14 7951 133.9518 x 16 7952 183.4720 x 18 7953 240.5922 x 20 7954 257.1124 x 20 7955 462.91
Two StepLength (in) Part # Price
8 x 4 7963 $ 121.32
10 x 6 7964 144.98
12 x 8 7965 172.04
14 x 10 7966 210.18
16 x 12 7967 242.56
18 x 14 7968 335.39
20 x 16 7969 438.14
24 x 18 7970 567.78
PVC Cement and Primer
Part # Description Price
719-G Cement, Gallon 101.95
719-Q Cement, Quart 30.85
P-68C-P Primer, Pint 11.95
P-68C-Q Primer, Quart 20.00
Rear Exhaust
Double Slot Single Slot Double Lateral Single Lateral
ReducerOne Step
ReducerTwo Step
61
ALSCO PVC Flexible Hose & Ducting
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Features:• Economical alternative to most duct and sacrifices nothing in performance• Great flexibility with tight bending characteristics• Ideal for fume removal, dust collection and ventilation applications• Materials used in CVD-Clear are FDA acceptable (2” - 18”)• Available in metric diameters• Available in a static conductive version (CVD-SC), consult sales office for
minimum requirements
Fume Removal Hose
Part # Part # I.D. Price Per Price Clear Blue (inch) 25ft Box Per Foot
Specifications:• Temperature Range: -20º F to 180º F• Construction: Polyvinylchloride reinforced with a wire helix• Standard Colors: Clear or Blue• Standard Lengths: 25ft per box, 50ft available by request• Size Range: 1” to 18”
CPVC -80 CPVC -80 Price Approx. Average MinimumPipe Size Part Per Ft. Wt. / Ft. Max. W.P. O.D. I.D. Wall Thick.In. (mm) Number $ Lbs. @ 73.4°F (IN.) (IN.) (IN.)
• Designed for temp. to 210°F• Working Pressure is based at 73.4°FNOTE: Threaded CPVC pipe has a 50 % derating factor on W.P.@ 73°F.
WARNING: CPVC products are not recommended for com-pressed air or gas systems.
NSF Standard 14 and 61ASTM D-1784 - Material
Type IV, Grade 1 (cell class 23447-B)
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Cement & PrimerSee pages 83-84
63
ALSCO CPVC FITTINGS- SCHEDULE 80
PVC and CPVC piping products ARE NOT RECOMMENDED for systems which transport or store compressedair or gases. Testing PVC or CPVC piping products with compressed air or gases is also NOT RECOMMENDED.
STANDARDS AND SPECIFICATIONSNSF STANDARD 14 and 61ASTM D 1784 - MATERIAL
Type IV, Grade 1 (cell class 23447-B)Soc. ASTM F-439 Thr. ASTM F-437
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
90º Elbow Socket
Size Inch Part # Price1/4 1806-002 3.673/8 1806-003 3.671/2 1806-005 1.443/4 1806-007 1.831 1806-010 2.91
Size Inch Part # Price1/4 1850-002 2.463/8 1850-003 2.461/2 1850-005 2.143/4 1850-007 2.711 1850-010 4.45
1 1/4 1850-012 6.741 1/2 1850-015 5.58
2 1850-020 7.592 1/2 1850-025 12.92
3 1850-030 13.824 1850-040 15.99- - -
65
ALSCO CPVC FITTINGS- SCHEDULE 80
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Part # Size Inch Price
1801-101 3/4 x 3/4 x 1/2 7.521801-130 1 x 1 x1/2x 1/2 8.66 1801-131 1 x 1 x 3/4 8.66
- - -1801-168 1 1/4 x 1 1/4 x 1 16.961801-202 1 1/2 x 1 1/4 x 1 16.961801-210 1 1/2 x 1 1/2 x 3/4 17.711801-211 1 1/2 x 1 1/2 x 1 17.71
- - -1801-247 2 x 2 1/2 21.101801-248 2 x 2 x 3/4 21.101801-249 2 x 2 x 1 21.101801-251 2 x 2 x 1 1/2 21.101801-338 3 x 3 x 2 43.161801-420 4 x 4 x 2 54.501801-422 4 x 4 x 3 54.501801-532 6 x 6 x 4 153.72
See our Nut and BoltKits on page 56 for plastic flanged applications
Other sizes and configurations are available, please contact our Sales Office.
67
ALSCO CPVC NIPPLES - SCHEDULE 80
TEFLON TAPESIZE INCH PART NUMBER PRICE (each)
1/2 x 260 S260 $ .40
1/2 x 520 S520 .60
3/4 x 260 SW260 .80
3/4 x 520 SW520 1.151 x 520 SX520 1.65
Quantity Discounts Available.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
NIPPLES MPT x MPT (THREADED BOTH ENDS)
Part # Dia. x Length Price
1880-005 1/4” x Close 1.631880-015 1/4” x 1 1/2” 1.751880-020 1/4” x 2” 1.901880-025 1/4” X 2 1/2” 2.211880-030 1/4” X 3” 2.211880-035 1/4” X 3 1/2” 2.501880-040 1/4” X 4” 2.501880-045 1/4” X 4 1/2” 2.801880-050 1/4” X 5” 2.801880-055 1/4” X 5 1/2” 3.041880-060 1/4” X 6” 3.04
Part # Dia. x Length Price
1881-005 3/8” x Close 1.861881-015 3/8” x 1 1/2” 1.961881-020 3/8” x 2” 2.211881-025 3/8” X 2 1/2” 2.351881-030 3/8” X 3” 2.621881-035 3/8” X 3 1/2” 2.921881-040 3/8” X 4” 2.921881-045 3/8” X 4 1/2” 3.351881-050 3/8” X 5” 3.351881-055 3/8” X 5 1/2” 3.501881-060 3/8” X 6” 3.50
Part # Dia. x Length Price
1882-005 1/2” x Close 1.751882-015 1/2” x 1 1/2” 1.901882-020 1/2” x 2” 2.101882-025 1/2” X 2 1/2” 2.231882-030 1/2” X 3” 2.391882-035 1/2” X 3 1/2” 2.801882-040 1/2” X 4” 2.801882-045 1/2” X 4 1/2” 3.151882-050 1/2” X 5” 3.151882-055 1/2” X 5 1/2” 3.541882-060 1/2” X 6” 3.54
Part # Dia. x Length Price
1883-005 3/4” x Close 2.161883-015 3/4” x 1 1/2” 2.321883-020 3/4” x 2” 2.501883-025 3/4” X 2 1/2” 2.861883-030 3/4” X 3” 2.861883-035 3/4” X 3 1/2” 3.301883-040 3/4” X 4” 3.301883-045 3/4” X 4 1/2” 3.661883-050 3/4” X 5” 3.661883-055 3/4” X 5 1/2” 4.091883-060 3/4” X 6” 4.09
Part # Dia. x Length Price
1884-005 1” x Close 2.62- - -
1884-020 1” x 2” 2.861884-025 1” X 2 1/2” 3.541884-030 1” X 3” 3.541884-035 1” X 3 1/2” 4.091884-040 1” X 4” 4.091884-045 1” X 4 1/2” 4.611884-050 1” X 5” 4.611884-055 1” X 5 1/2” 5.341884-060 1” X 6” 5.34
Part # Dia. x Length Price
1885-005 1 1/4” x Close 3.30- - -
1885-020 1 1/4” x 2” 3.661885-025 1 1/4” X 2 1/2” 4.611885-030 1 1/4” X 3” 4.611885-035 1 1/4” X 3 1/2” 5.731885-040 1 1/4” X 4” 5.731885-045 1 1/4” X 4 1/2” 6.741885-050 1 1/4” X 5” 6.741885-055 1 1/4” X 5 1/2” 7.741885-060 1 1/4” X 6” 7.74
Part # Dia. x Length Price
1886-005 1 1/2” x Close 3.66- - -
1886-020 1 1/2” x 2” 4.091886-025 1 1/2” X 2 1/2” 5.081886-030 1 1/2” X 3” 5.081886-035 1 1/2” X 3 1/2” 6.151886-040 1 1/2” X 4” 6.151886-045 1 1/2” X 4 1/2” 7.171886-050 1 1/2” X 5” 7.171886-055 1 1/2” X 5 1/2” 8.171886-060 1 1/2” X 6” 8.17
Part # Dia. x Length Price
1887-005 2” x Close 5.66- - -- - -
1887-025 2” X 2 1/2” 6.741887-030 2” X 3” 6.741887-035 2” X 3 1/2” 7.991887-040 2” X 4” 7.991887-045 2” X 4 1/2” 9.231887-050 2” X 5” 9.231887-055 2” X 5 1/2” 10.471887-060 2” X 6” 10.47
Part # Dia. x Length Price
1888-005 2 1/2” x Close 10.27- - -- - -- -
1888-030 2 1/2” X 3” 11.271888-035 2 1/2” X 3 1/2” 13.741888-040 2 1/2” X 4” 13.741888-045 2 1/2” X 4 1/2” 16.411888-050 2 1/2” X 5” 16.411888-055 2 1/2” X 5 1/2” 19.261888-060 2 1/2” X 6” 19.26
Part # Dia. x Length Price
1889-005 3” x Close 13.29- - -- - -- -
1889-030 3” X 3” 13.291889-035 3” X 3 1/2” 17.401889-040 3” X 4” 17.401889-045 3” X 4 1/2” 20.241889-050 3” X 5” 20.241889-055 3” X 5 1/2” 23.131889-060 3” X 6” 23.13
Part # Dia. x Length Price
1890-005 4” x Close 20.50- - -- - -- - -- - -- - -
1890-040 4” X 4” 24.621890-045 4” X 4 1/2” 28.671890-050 4” X 5” 28.671890-055 4” X 5 1/2” 32.761890-060 4” X 6” 32.76
For longer length nipples, size 7” through 12”, please contact our Sales office.
Features• Manufactured to Sch. 40 IPS dimensions• Full line of 1/4” through 8” clear fittings• Simple solvent-welded joining techniques• Fully compatible with standard PVC • Corrosions resistant • Non-conductive• Resists bacterial and biological activity• Wide range of chemical resistance• Light weight, easy to handle and install• Neatly packed — clean and scratch free• Standard plain-end 10-foot lengths
Applications• Routinely used as dual-containment
piping for high purity piping runs,where leak detection is critical.
• Semiconductor • Clean rooms• Chemical Processing • Cosmetics• Medical / Hospital • Electroplating• Pharmaceuticals • Lab Applications• Fish Hatcheries• Food & Dairy Processing• Environmental Applications• Beverage Processing• Visual Test Equipment
PSI water, non-shock @ 73º F with solvent welded connections. (All Pipe - Sold in Standard Length, 10 feet ± 1”) There is a cutting charge forshorter lengths. *This size does not comply with schedule 40 criteria.
140-005 1/2” x Close 1.38140-015 1/2” x Short 1.83140-020 1/2” X 2” 2.44140-030 1/2” X 3” 3.66140-040 1/2” X 4” 4.88140-050 1/2” X 5” 6.09140-060 1/2” X 6” 7.32140-080 1/2” X 8” 9.75140-100 1/2” X 10” 12.19140-120 1/2” X 12” 14.63
Part # Dia. x Length Price
141-005 3/4” x Close 2.26- - -
141-020 3/4” X Short 3.29141-030 3/4” X 3” 4.95141-040 3/4” X 4” 6.60141-050 3/4” X 5” 8.24141-060 3/4” X 6” 9.89141-080 3/4” X 8” 13.18141-100 3/4” X 10” 16.48141-120 3/4” X 12” 19.77
Part # Dia. x Length Price
142-005 1” x Close 3.64- - -
142-020 1” X Short 4.85142-030 1” X 3” 7.28142-040 1” X 4” 9.71142-050 1” X 5” 12.13142-060 1” X 6” 14.56142-080 1” X 8” 19.42142-100 1” X 10” 24.27142-120 1” X 12” 29.12
Part # Dia. x Length Price
143-005 1 1/2” x Close 7.11- - -
143-025 1 1/2” X Short 10.16143-030 1 1/2” X 3” 12.18143-040 1 1/2” X 4” 16.25143-050 1 1/2” X 5” 20.31143-060 1 1/2” X 6” 24.38143-080 1 1/2” X 8” 32.51143-100 1 1/2” X 10” 40.62143-120 1 1/2” X 12” 48.75
Part # Dia. x Length Price
144-005 2” x Close 11.25- - -
144-025 2” X Short 14.06144-030 2” X 3” 16.87144-040 2” X 4” 22.50144-050 2” X 5” 28.12144-060 2” X 6” 33.75144-080 2” X 8” 45.01144-100 2” X 10” 56.24144-120 2” X 12” 67.49
Clear PVC Schedule 80 Nipples
For Clear PVC SwingCheck valves, Y-Strain-ers and Basket strain-ers, See valve sectionpages 180, 263-265,and 268.
* Pressure rating 15 PSI * Pressure rating 15 PSI
70
ALSCO PVC PIPE - SCHEDULE 40• Full range of IPS sizes in 1/2" - 16”
Sch 40. 18” - 24” SDR• Choice of plain or belled ends.• PVC gasket pipe also available.
NOTE: Threaded PVC pipe has a 50 % derating factor on W.P.@ 73°F.Working pressure is based on 73.4°F.
WARNING: PVC products are not recommended for compressed air or gas systems.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Cement & PrimerSee pages 83-84
NOMINAL PART PRICE PART PRICE APPROX. MAX. W.P. O.D. AVERAGE MIN.PIPE SIZE NUMBER PER FT. NUMBER PER FT. WT. / FT. @73.4ºF (IN.) I.D. WALLIN. (mm) PE $ BE $ LBS. (IN.) (IN.)
*Reducing Tees-Other sizes and configurations available. Please contact Sales office.Also available in S x S x T. Prices are subject to change without notice.
73
Size (inch) Part # Price Part # Price Part # PriceSpig x S Spig x FPT MPT x FPT
3/8 x 1/4 - - - - 439-052 1.101/2 x 1/4 437-072 .44 438-072 .51 439-072 1.101/2 x 3/8 437-073 .44 438-073 .51 439-073 1.103/4 x 1/4 - - 438-098 .51 439-098 .683/4 x 3/8 - - 438-099 .54 439-099 .683/4 x 1/2 437-101 .24 438-101 .39 439-101 .681 x 1/4 - - 438-128 .66 439-128 1.021 x 3/8 - - 438-129 .62 439-129 1.021 x 1/2 437-130 .44 438-130 .62 439-130 .961 x 3/4 437-131 .44 438-131 .62 439-131 .96
1 1/4 x 1/2 437-166 .60 438-166 .96 439-166 1.441 1/4 x 3/4 437-167 .60 438-167 .96 439-167 1.441 1/4 x 1 437-168 .60 438-168 .96 439-168 1.44
1 1/2 x 1/2 437-209 .63 438-209 1.10 439-209 1.721 1/2 x 3/4 437-210 .63 438-210 1.10 439-210 1.721 1/2 x 1 437-211 .63 438-211 1.10 439-211 1.72
1 1/2 x 1 1/4 437-212 .63 438-212 1.10 439-212 1.722 x 1/2 437-247 1.05 438-247 1.48 - -2 x 3/4 437-248 1.05 438-248 1.48 439-248 1.842 x 1 437-249 1.05 438-249 1.48 439-249 1.84
2 x 1 1/4 437-250 1.05 438-250 1.48 439-250 1.842 x 1 1/2 437-251 1.05 438-251 1.48 439-251 1.842 1/2 x 1 437-289 1.68 438-289 2.14 - -
Size Part # Price1/2 4013-005 $ 2.373/4 4013-007 2.86
1 4013-010 3.641 1/2 4013-015 5.72
2 4013-020 7.14
Male Adapter
Comp x MPT
Flexible Couplings - PVC
• Made of tough elastomeric polyvinyl chloride (PVC)• Strong, resilient and unaffected by soil conditions.• Resistant to chemicals, ultraviolet rays, fungus
growth, and normal sewer gases.• Sizes 1 1/4” to 15”, other sizes available.• All couplings are clearly marked with part number,
size and pipe material that coupling will connect.
2 x 1/2 3/4 867-247SR 25.542 x 1 1 1/8 867-249SR 25.54
2 x 1 1/2 1 1/2 867-251SR 25.543 x 1/2 7/8 867-333SR 34.903 x 1 1 1/8 867-335SR 34.903 x 2 2 1/4 867-338SR 34.90
4 x 1/2 1 1/8 867-415SR 43.974 x 1 1 1/8 867-417SR 43.974 x 2 2 1/4 867-420SR 43.974 x 3 3 867-422SR 51.59
6 x 1/2 1 1/8 867-523SR 73.276 x 1 1 1/8 867-525SR 73.276 x 2 2 1/4 867-528SR 73.276 x 4 4 867-532SR 102.61
8 x 1/2 4 867-573SR 155.108 X 1 4 867-575SR 155.108 X 2 4 867-578SR 155.108 X 4 4 867-582SR 189.868 X 6 6 867-585SR 218.67
10 X 4 4 867-624SR 225.8610 X 6 6 867-626SR 259.7812 X 4 4 867-664SR 283.0412 X 6 6 867-666SR 328.52
Clamp-OnSaddle xSocket
Single Outlet
Clamp-OnSaddle x
SR Thread Single Outlet
Other sizes, seals, and hardware material available. Double outlet saddles are also avail-able. Contact Sales Office for more information.
82
ALSCO Pipe Repair System
Features• Hand moldable, steel-filled epoxy• Conformable, safe & simple to use• Stops leaks, fill holes & cracks • Sets rock hard in 20 minutes• Non-toxic, solvent free• Used on potable water lines• Works under water
Technical Data• Working Time: 2 minutes• Set Time: 20 minutes• Max. Use Temperature: 300°F
FIX STIXTM 20-Minute Epoxy Fix anything ... FAST!
Part # Price Each9983 $ 5.46
Features• Stop active leaks fast• Chemically inert facing• Faced with GORE-TEXTM expanded
PTFE• Most effective seal for all common
chemicals
Technical Data• Adjustment Range: 6” to 11/16”• Materials: Band & housing made of corrosion
resistant 301 CRES; Heat-treated alloy screwand nut are cadmiun plated
• PTFE Sealant Material: Temperature range-450°F to 600°F
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Got a Leak? Plug it with FIX STIXTM, wrap it with STOP IT®.STOP IT® over FIX STIXTM — the way to repair all pipe leaks
Features• Color-white or black standard• Quick setting in-field repair• Works on metal and plastic• Stops leaks & reinforces joints• Great pressure retention• No hot work- no special tools• Can be applied underwater• Minimize lost production• Resistant to petroleum, hydro-
carbons and most chemicals• Used on potable water lines• Safe, simple to use
Stop It® Pipe Repair System
each container contains FIX STIXTM
— hand moldable epoxy, STOP IT®
knitted, fiberglass tape coated with awater-activated, polyurethane resin,gloves
(for easy clean-up) and directions.
Technical Data• Temperature/Heat Resistance: may be used with
good result on pipe -20°F to 250°F. Should not beused on pipe greater than 500°F. Note: Longevitywhen exposed to high temperature depends uponthickness of application and consistent temp levelPipe should always be at ambient temperature before applying STOP IT®.
• Pressure: up to 400 psi (28 kg/cm2)• Set Time: will set tack free in 3-5 minutes at
ambient temperature of 50°F to 80°F• Cure Time: 30 minutes at ambient temperature
Nom. Pipe Number of 4’ RollsSize (Inch) 50 PSI 150 PSI 400 PSI
1/2 1 1 13/4 1 1 11 1 1 2
1 1/4 1 2 31 1/2 2 2 3
Nom. Pipe Number of 12’ RollsSize (Inch) 50 PSI 150 PSI 400 PSI
1 1 1 11 1/2 1 1 1
2 1 1 12 1/2 1 2* 2*
3 1 2* 2*3 1/2 1 2* 2*
4 1 2* 3*5 2* 2* 3*
Nom. Pipe Number of 12’ RollsSize (Inch) 50 PSI 150 PSI 400 PSI
*4”x12’ should be used in multiple roll applications.
Actual diameters vary with type of pipe or tube, and with thickness of fittings.When repairing fittings, use next larger size pipe as your guide.
Part # Part # Size Price Ea.9987-B 9987-W 2” x 4’ $ 28.759988-B 9988-W 2” x 12’ 43.929989-B 9989-W 4” x 12’ 71.02
Hazardous Polymerization WILL NOTOCCUR. Product will not violently reactwith air or water. Toxic Products will notform. Product is stable, not a hazardouswaste.
Training CD
Available, Contact Sales
Office
83
ALSCO SOLVENT CEMENTS
PVC Solvent Cement (Clear)705TM Medium bodied, fast setting, clear PVC cement for allclasses & schedules through 6” diameter, Sch. 80 through 4”diameter.
3 year shelf life.
Gallon 711-G $ 88.55
Quart 711-Q 26.15
Pint 711-P 15.35
1/2 Pint 711-H 8.60
Quart 714-Q $ 28.75
Pint 714-P 16.15
Gallon 795-G $ 88.10
Quart 795-Q 25.35
Pint 795-P 15.05
1/2 Pint 795-H 8.75
Gallon 747-G $ 83.20
Quart 747-Q 24.10
Pint 747-P 14.10
1/2 Pint 747-H 8.60
Gallon 719-G $ 101.95
Quart 719-Q 30.85
PVC Solvent Cement (Gray)711TM Heavy bodied, medium setting, gray PVC cement for allclasses & schedules, including Schedule 80, through 12”diameter.
3 year shelf life.
PVC Solvent Cement (Gray)719TM Extra heavy bodied, slow setting, gray PVC cement forall classes & schedules, including Schedule 80, through 30”diameter. 2 year shelf life.
PVC Solvent Cement (Clear)795TM Medium bodied, fast setting, clear PVC cement for allflex/ flex & flex/ rigid PVC pipe and fittings, through 6” diameter.
3 year shelf life.
CPVC Solvent Cement (Gray)714TM Heavy bodied, medium setting, gray CPVC cement for allclasses and schedules, through 12” diameter.
2 year shelf life.
Special Purpose Adhesives Continued on the next page with the Primers and Cleaners.
Pool ‘R SpaTM (Blue fades to clear in Sunlight)747TM Medium bodied, extremely fast setting, royal blue PVCcement for all classes & schedules through 6” diameter.
3 year shelf life.
NOTE: All containers have applicator cap except #719 and all gallon containers.
CPVC Solvent Cement (Gray)724TM Heavy bodied, medium setting, gray CPVC cement for allclasses and schedules, through 12” diam. Formulated for systemsrequiring chemical resistance to caustics including hypochlorite,mineral acids, & aqueous salt solutions. May be used on PVCsystems for chemical applications. 2 year shelf life.
PVC Solvent Cement (Clear)717TM Extra heavy bodied, medium setting, gray PVC cement forall classes & schedules with interference through 12” diameter,including Schedule 80.
3 year shelf life.
Gallon 724-G $ 105.35
Quart 724-Q 30.45
Pint 724-P 17.25
Gallon 717-GC $ 87.50
Quart 717-QC 25.95
Pint 717-PC 15.40
1/2 Pint 717-HC 8.80
PVC Solvent Cement (Gray) 717TM Extra heavy bodied, medium setting, gray PVC cement forall classes & schedules with interference through 12” diameter,including Schedule 80.
3 year shelf life.
Gallon 717-GG $ 87.50
Quart 717-QG 25.95
Pint 717-PG 15.40
1/2 Pint 717-HG 8.80
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
84
ALSCO Cements / Primers / Cleaners
PVC & CPVC Purple PrimerP-68TM For all PVC and CPVC applications. Meets ASTM F-656 &
SCAQMD 1168 LOW VOC PURPLE
3 year shelf life.
Size Part # Price
Gallon P-68P-G $ 60.35
Quart P-68P-Q 20.00
Pint P-68P-P 11.95
1/2 Pint P-68P-H 6.40
Gallon P-68C-G 60.35
Quart P-68C-Q 20.00
Pint P-68C-P 11.95
1/2 Pint P-68C-H 6.40
Gallon C-65-G 47.75
Quart C-65-Q 14.90
Pint C-65-P 10.05
1/2 Pint C-65-H 5.85
PVC & CPVC Clear PrimerP-68TM For all PVC and CPVC applications. Meets ASTM F-656 &
SCAQMD 1168 LOW VOC CLEAR
3 year shelf life.
Clear Pipe CleanerC-65TM For all PVC ,CPVC, ABS and Styrene piping applications.
SCAQMD 1168 LOW VOC CLEAR
Unlimited year shelf life.
Gallon P-70C-G 77.95
Quart P-70C-Q 23.65
Pint P-70C-P 14.60
1/2 Pint P-70C-H 7.30
PVC & CPVC Clear PrimerP-70TM For all PVC and CPVC applications. The most aggressive
primer commercially available.
Meets ASTM F-656 & SCAQMD 1168 LOW VOC CLEAR3 year shelf life.
Gallon PC-64-G 56.20
Quart PC-64-Q 19.30
Pint PC-64-P 11.75
1/2 Pint PC-64-H 6.30
PVC & CPVC Purple Primer-CleanerPC-64TM For cleaning and surface preparation of PVC and CPVC
pipe and fittings. LOW VOC PURPLE3 year shelf life.
NOTE: DO NOT USE PRIMER ON ABS PIPE AND FITTINGS
Teflon 1/2 Pint TF8 $ 12.39
Teflon - 1 Pint TF16 18.63
Regular - 1 Pint TU16 17.47
Pipe Dope CompoundSELECT-UNYTE (TF8 and TF16) — Soft-set , White All PurposeVirgin Teflon* (PTFE) Paste Pipe Joint Compound. For use onPlastic, and Metal threaded systems carrying Air, Steam, Petrole-um, Water, Gases and many Chemicals. TU555 — Soft-set, Yel-low Pipe Joint Compound for use on Plastic, and Metal threadedsystems carrying Air, Steam, Petroleum, Water, Gases, and manyChemicals.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
PVC Two Part Adhesive (White)810 Two component, high strength reactive adhesive for joining,fabricating and repairing PVC and CPVC pipe and fittings. BondsPVC, CPVC to dissimilar materials such as metals, concrete, clayand others. 1 year shelf life.
Size Part # PriceGallon 810-G $ 146.95Quart 810-Q 45.00Pint 810-P 29.454 Oz. 810-4oz 13.55
Quart 600-Q $ 26.00
Pint 600-P 15.20
Special Purpose Adhesive (Clear)600TM Light bodied, fast setting contact adhesive for PE, PP,PVC, ABS, Styrene non-pressure drainage systems through 4”;HVAC Duct applications through 12” interference fit.2 year shelf life.
Quart 790-Q $ 22.90
Pint 790-P 13.70
1/2 Pint 790-H 8.15
Multi-Purpose & Transition Cement (Clear)790TM Medium bodied, fast setting, clear PVC / CPVC / ABS /Styrene cement for all classes & schedules through 6” diameter,Schedule 80 through 4” diameter. 3 year shelf life.
85
ALSCO Solvent Cementing Instructions & Tech. Data
3. Check dry fit of the pipe and fittings. Pipe should enter the fitting about 1/3 to 3/4 depth. Position pipe and fitting to assure alignment. Usinga clean rag, wipe the pipe surface and fitting socket to remove all dirt, moisture, and grease. If wiping fails to clean the surfaces, a chemicalcleaner must be used.
4. Using a clean, natural bristle brush about 1/2 the size of the pipe diameter, freely apply the primer to the fitting socket with a scrubbingmotion until the surface is penetrated. Repeated applications may be necessary. Now apply the primer to the pipe surface equal to the depth ofthe fitting socket in the same manner, making sure the surface is well penetrated. Again apply primer to the fitting socket, to make sure it is stilldamp.
5. Using a clean natural bristle brush 1/2 the size of the pipe diameter (not a dauber brush), flow on a heavy coat of solvent cementto the male end of the pipe. Load the brush and do not trim. The amount should be more than sufficient to fill any gap. Next applya liberal coat of solvent cement to the inside of the socket, using straight outward strokes to keep excess cement out of the socket. WhileBOTH SURFACES are STILL WET with solvent cement, insert the pipe into the socket with a 1/4 turn twisting motion. The pipe MUST go tothe BOTTOM of the socket. The application of solvent cement to pipe and fitting, and the insertion of the pipe into the fitting, should be com-pleted in LESS THAN 1 MINUTE. If necessary, use two men to simultaneously apply the solvent cement to pipe and fitting. Hold the jointtogether for approximately 30 seconds until both surfaces are firmly gripped. Allow proper set time before disturbing joints. After assembly, aproperly-made joint will usually show a bead of cement around its entire perimeter. This should be brushed off. Allow the joint to cure for anadequate time before pressure testing.
Estimated Quantities of PVC / CPVC cementSize Fittings (in.) Pint # of Joints Quarts # of Joints
Joint Cure Schedule for Heavy Weight PVC & CPVC Solvent CementsRelative Humidity Cure Time Cure Time Cure Time Cure Time Cure Time60 % or Less Pipe Sizes 1/2" to 1 1/4" Pipe Sizes 1 1/2" to 3" Pipe Sizes 4" to 8" Pipe Sizes 10" to 16" Pipe Sizes 18" to 24"
Temperature RangeDuring Assembly and Up to Above 180 Up to Above 180 Up to Above 180 Up to Up to
Cure Periods 180 psi to 370 psi 180 psi to 315 psi 180 psi to 315 psi 100 psi 100 psi
0° - 40°F 8 Hr. 48 Hr. 16 Hr. 96 Hr. 48 Hr. 8 Days 8 Days 10 to 12 Days
Initial Set Times for Heavy Weight PVC & CPVC Solvent CementsTemperature Pipe Sizes Pipe Sizes Pipe Sizes Pipe Sizes Pipe Sizes
Range 1/2" to 1 1/4" 1 1/2" to 3" 4" to 8" 10" to 20" 18" to 24"60° - 100°F 15 Min. 30 Min. 1 Hr. 2 Hr. 3 Hr.40° - 60°F 1 Hr. 2 Hr. 4 Hr. 8 Hr. 12 Hr.
0° - 40°F 3 Hr. 6 Hr. 12 Hr. 24 Hr. 36 Hr.
Estimated Quantities of PVC / CPVC cementSize Fittings (in.) Pint # of Joints Quarts # of Joints
2 1/2 25 503 20 404 12 245 9 186 5 108 - 5
5 - Step Solvent Cement Instructions(GENERAL INSTRUCTIONS)1. Condition pipe and fittings to the same temperature conditions. Cut ends of pipe square, using fine-toothed hand saw and miter box orpower saw. Tube cutters with wheels designed for use with PVC are acceptable, provided they do not leave a raised bead on the outsidediameter of the pipe.2. Using a chamfering tool or file, put a 10° to 15° chamfer (bevel) on the end of the pipe. (Instructions continued on next page)
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
86
Teflon TapeThread Seal Tape (White Standard)-
With Teflon®.Complies with MIL-T-27730A
Specifications
PIPE DOPESELECT-UNYTE (TF8 and TF16) — Soft-set , White All PurposeVirgin Teflon* (PTFE) Paste Pipe Joint Compound. For use on Plastic,and Metal threaded systems carrying Air, Steam, Petroleum, Water,Gases and many Chemicals. Meets Federal Specification TT-S-1732.TU16 — Soft-set, Yellow Pipe Joint Compound for use on Plastic,and Metal threaded systems carrying Air, Steam, Petroleum, Water,Gases, and many Chemicals. Meets Federal Specification TT-S-1732
Fits standard 1/2 pint, pint and quart cans.CM-BCP $ 7.05
CM-75 Can-Mate® Adjustable Plastic Dauber3/4” dauber, for Pipe diameters up to 1 1/4”.Fits standard 1/2 pint, pint and quart cans.
CM-150 Can-Mate® Adjustable Plastic Dauber3/4” dauber, for Pipe diameters up to 3”.
Fits standard 1/2 pint, pint and quart cans.
CM-75 $ 3.45
CM-150 $ 3.45
DP-75 Cap Dauber3/4” dauber, for Pipe diameters up to 1 1/4”.
Fits standard 1/2 pint and 1 pint cans.DP-75 $ .80
DP-150 Cap Dauber1 1/2” dauber, for Pipe diameters up to 3”.
Fits standard 1/2 pint and 1 pint cans.DP-150 $ .85
DQ-150 Cap Dauber1 1/2” dauber, for Pipe diameters up to 3”.
Fits quart cans.DQ-150 $ .85
3020 Roll-A-Weld3” roller for use on 3” through 6” pipe diameters.
Fits MT-653 paint type quart cans.3020 $ 10.00
7020 Jumbo Roll-A-Weld7” roller for use on pipe diameters 6” and larger.
Fits MT-648 gallon cans.7020 $ 12.25
4020 SwabFor use on pipe diameters 6” and larger.
Fits MT-648 gallon cans.
Empty Metal Cans -Writable surface for content identification.
4020 $ 12.25
MT-648 - Gallon Can with 2 7/8” Neck MT-648 $ 12.95MT-651 - Quart Can with 1 3/4” Neck MT-651 4.40
MT-653 - Quart Can with Paint Type Neck MT-653 4.40MT-654 - Pint Can with 1 3/4” Neck MT-654 3.90
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
87
ALSCO Link-Seal® Modular SealsLink-Seal® Modular Seals for Wall Openings
Link-Seal® Modular Seal with EPDM Seal Elements
FeaturesSaves time and money ...Link-Seal modular seals install in up to 75% less time compared to lead-oakum joints, hand fitted flashings, mastics or casing boots.Positive hydrostatic seal ...Link-Seal modular seals are rated at 20 psig (40 feet of head), whichexceeds the performance requirements of most applications.Long seal life ...Link-Seal modular seals are designed for use as a permanent seal. Sealelements are specially compounded to resist aging and attack from ozone,sunlight, water and a wide range of chemicals.Maximum protection against corrosion ...Standard fasteners with a two-part organic resin coating or corrosion resistant 316 stainless steel.Configure a Link-Seal modular seal to match your application ...Color coded EPDM, Nitrile, & Silicone elastomers may be used withvarious hardware options to match performance characteristics with service conditions.
Model “C” Link-Seal Modular SealsSuitable for use in water, direct ground burial and atmospheric conditions. Provides electrical iso-
Temp. Range: -40 to +250°F (-40 to +121°C)** = Sustained operation near temperature limits may affect life expectancy.
Link-Seal Modular Seals are commonlyinstalled in cored wall openings or pre-castopenings such as those formed by use of theThunderline Cell-Cast® Disk pipe penetrationhole forms.
Nominal Part Cored Hole Links Price PerPipe Size Number ID Per Seal Complete Seal
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
88
ALSCO
Provides gripping power without scratching or deforming plastic or polished metal pipe.The extra strong, coated polyester strap is far superior to competitor’s cottonstraps for slip resistance, strength, and durability.
Strap Wrenches
Quick release tubing cutters were invented by Reed! Reed uses a ball detent or threadedscrew for the wheel pin, whereas competitors use a grooved pin and clip which is easilylost and makes wheel change extremely difficult.
Part Price Pipe Capacity Tube Capacity Handle L.# $ In. Nom. Actual Ø mm Actual in. Actual Ø mm Inches
Shears for Plastic and Replacement BladesQuick release tubing cutters were invented by Reed! Reed uses a ball detent or threadedscrew for the wheel pin, whereas competitors use a grooved pin and clip which is easilylost and makes wheel change extremely difficult.
RS1
RS2
SC1
Tooth design, tooth set, and hardness are designed for efficiency and longevity whencutting highly abrasive ABS and PVC pipe. Die cast design of handle makes bladechanging fast and easy. Blades are interchangeable with most manufacturers. PPSprovides fastest cuts on large, thick pipe. Blade design allows simultaneous cuttingforward and backward.
Part Price Pipe Capacity Weight Length# $ In. Nom. Actual Ø mm Lbs. - Inches
04512 PPS12 $ 16.50 3 75 0.6 - 16
04510 PPS18 18.50 4 100 0.7 - 22
-
-
94510 PPS18B 10.95 Replacement Blade for PPS1894512 PPS12B 8.60 Replacement Blade for PPS12
Turn any shape in close quarters. Dual reversible jaws permit ratchet action in either direction without removing the wrench from the pipe. Reed chain wrenches offer by farthe most sizes and are longer lasting because they have up to twice as many chain slots as any competitive tool.
Part Price Pipe Capacity Weight Maximum Length# $ In. Nom. Actual Ø mm Lbs. O.D. (in.) Inches
Part Price Pipe Capacity Weight Length# $ In. Nom. Actual Ø mm Lbs. - Inches
04176 RS1 $ 69.45 1.7 42 1 - 8.3
04177 RS2 132.70 2.4 63 2.5 - 17
04174 SC1 14.25 1.3 32 .3 - 8.394175 RS1B $ 24.80 Replacement Blade for RS1 with Pins & Clips94176 RS2B 33.55 Replacement Blade for RS294170 SC1B 5.85 Replacement Blade for SC1
Chain Wrenches
(Heavy Duty)
Cutters
Replacement Blades
Plastic Pipe Saws
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Cutting Tools & Accessories
89
Cutting Tools & AccessoriesALSCO
Vise Tripod (R450+ Series TriStands*) * Patent Pending
Reed tristands fold into compact shape, have handle grips, and have the lightest weightfor the easiest portability of all tristands. The sturdiest, most capacity, have the onlydouble faced jaws and have by far the greatest value of all tristands available.
Part Price Pipe Capacity Weight - -# $ In. Nom. Actual Ø mm Lbs. - -
04395 BT1 $ 185.00 1 1/2 - 8 40 - 200 2.8 - -
04398 BT2 298.70 1 1/2 - 12 40 - 300 6 - -
DEB 2: Deburrs inner and outer edges of pipe up to 2” in diameter.
DEB 4: Gives smooth, chamfered pipe end so solvent spreads evenly as pipe is joined. Deburrs fast - one easy revolution produces a 3/32” 15° chamfer in seconds.
With a strong aluminum alloy frame, effective roller locking, and good tool life, a smooth 15° bevel is produced on all types of plastic pipe in about one minute. Easilyadjustable for different pipe sizes and thicknesses, with no part changes. A faster, moreconsistent bevel than a file or an abrasive saw. It creates a continuous ribbon ratherthan chips and dust.
Part Price Pipe Capacity Weight # $ In. Nom. mm Lbs. - -
04436 DEB 2 20.00 Up to 2 Up to 60 .2 - -04430 DEB 4 60.65 1 1/4 to 4 42 to 114 .8 - -
Chain Vises for Plastic or Metal PipeStandard Reed chain and tristand vises, with dual purpose jaws for holding plastic andmetal pipe. Jaws are easily rotated from plastic pipe position to metal pipe position.Not only are the vises the strongest available anywhere, but the rotatable dual purposejaws on the chain vises and chain tristand are Reed exclusives.
Part Price Pipe Capacity Weight Vise Folded# $ In. Nom. Actual Ø mm Lbs. Style Length in.
With 28 to 1 leverage, it is easy for one person to join plastic pipe up to 16” or up to 12”where solvent cement is used.FOR GASKETED PIPE: The Plastic Pipe Joiner can connect and separate 4” - 16” gas-keted pipe. Components required for joining include the Plastic Pipe Joiner and V-shaped saddles.FOR SOLVENT CEMENT CONNECTIONS: The Plastic Pipe Joiner connects solvent cement joints on all pipe schedule, IPS, and water pipe from 4” - 12”. For solvent cement connections, individually sized saddles must be ordered together with thePlastic Pipe Joiner and plastic pipe joiner fitting attachment.
* For Gasketed Pipe ** For Solvent Cement Connection
Gasketed Pipe
Solvent Cement Connection
Cutter for Large Diameter PipeExcellent for in-the-trench or above ground cutting, with only 6” - 8” clearance aroundPE or PVC pipe. Outboard rollers keep cutter aligned on pipe to ensure a square cut.Simultaneously produces a 15° bevel on both sides of PVC cut. Long lasting, carbide-tipped blades penetrate up to 2” wall thickness. Includes both bevel and cutting blades.
Part Price Corp Weight - -# $ Size In. Thread Lbs. - -
04396 DT75P $ 240.00 3/4 CC 1 - -04397 DT100P 298.10 1 CC 1.4 - -
PVC Drill TapsThese unique PVC drill taps retain the coupon and, with three cutting edges and spiralflutes, eject three continuous ribbons of PVC. Other designs cause chip and heat build-up, and are not as precise or as free cutting. Direct tapping also eliminates the need forcostly tapping saddles.
Part Price Pipe Capacity Weight - -# $ In. Nom. Actual Ø mm Lbs.
Part Price Pipe Capacity Weight Description# $ In. Nom. Actual ø mm Lbs.
06027 FPV20 * 573.15 2 - 20 51 - 508 22 Feet, Bracket, and Vise96014 ACPSBBLS 168.75 - - - Backbone and Legs
* Legs and backbone for this vise are available, but must be ordered separately.
Vice Stand for Large Diameter PipeThis pipe stand is specifically designed for steel, ductile iron, and plastic pipe up to 20”.With 1 1/2” steel pipe legs * and high-tensile aluminum castings, this vise can hold2,500 lbs, yet without its legs, weighs only 22 lbs. The stand sets up quickly in the fieldwith only four bolts to tighten. 40” legs and a 72” backbone are recommended for nor-mal use, with 12” legs recommended for larger diameter, heavier pipe.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
91
ALSCO PP & PVDF Fusion ToolsEquipment for Socket and Butt Fusion Joining
AsahiProweld Shop 12
(W2500)
AsahiShop 4 Miniplast
Rental Policy for all Rental ToolsTools are invoiced on the date of shipment. Some machines are subject to a minimum maintenance fee.There is a deposit for all tools rented. Upon return of the tool, credit is issued for deposit less applica-ble rental, repair, freight charges or minimum maintenance charges. Rental charges end when the rental tool is received at ALSCO or the manufacturer. All tools are invoiced monthly and due upon receipt. Once the customer receives the tool(s), the customer assumes all responsibility and liability for the tool(s), until the equipment reaches ALSCO. All risk of loss, damage, theft or destruction of equipment shall be borne by the customer.
Part # Description Price5730000 Shop 4 Miniplast 7,610.00
Includes: Welding machine, ratchet planer,electronically controlled heating element, holder,flange adapter, master 4” pipe and fitting clamps,1/2” - 3” pipe and fitting inserts and 1 x 2 & 2 x 3
FEATURES• Tough, chemical resistant Polypropylene • Installed cost 50% less than glass• Positive joints are made in two minutes • Maintenance free• Breakage factor is eliminated • Control Unit ensures proper joints• Heavy gauge resistance wire molded • Wire electrically energized for
into the sockets molding process• Control Unit connectors easily push-fit on stout socket terminal posts.
NOTE: Joints should be made with Enfield Control Units only.Do not install a system of mixed brands.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Couplingsocket
PIPE ◊ Acid Waste Polypropylene Sch 40 Pipe Size Flame Retard Price Per Non-Flame Price Per
10ft. lgths Retard - 20ft lgths
(in) Part # Foot Part # Foot1 1/2 7500-015 8.40 7501-015 5.35
FEATURES• Polypro, Mechanical Joint, Flame Retardant. • Positive joints made in just 1/2 a min.• Simple, inexpensive untemperamental tools • Maintenance free and reusable• Joint is mastered by plumbers in minutes • Breakage factor is eliminated.• All plastic construction, no metal in joint. • Easily installed in difficult areas
Designed for School, Hospital and Industrial Labs
NOTE: ALL FITTINGS ARE FURNISHED ASSEMBLED WITH OLIVES AND UNION NUTS.
LablineTM PP Acid Waste SystemMechanical Joint Acid Waste Piping System
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
7583 1 1/2 x 3 3/8 Black $ 51.357584 1 1/2 x 3 3/8 White 61.507585 1 1/2 x 2 1/8 Black 51.357586 1 1/2 x 2 7/8 White 61.507587 1 1/2 x 3 3/8 Black 7.65
Sink Outlet Plug 7588 - Black $ 7.657589 - White 7.65
Sink Overflow 7590 1 1/2 Black $ 23.207591 1 1/2 White 23.20
Dilution Trap
7592 1 1/2 Black $ 390.55Base
7593 1 1/2 Clear 390.55Base
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
ALSCO FlowayTM PP Acid Resistant Floor DrainsFor efficiently managing chemical spills, our Floway™adjustable and non-adjustable polypropylene drain ports arespecially designed to feed into IPEX acid waste systems.• Rated for pedestrian traffic and available in sizes from 2” to 6”.
• Floway™ drains can be optionally configured with adjustable strainers,round funnels, sediment baskets and plain end or threaded outlets.
• Adjustable feature allows easy leveling after pouring of finished floors.
98
Features• Polyethylene• Black High Density• Cylindrical • Neutralization Tanks
Note: Prices include tank, cover, gasket,one inlet and one outlet. For vent,add price from the list below.
Orders must specify size of tank(gals.), size and type of inlet and outlet (and vent if required) on ourdrawing. Unless order specifiesotherwise, inlet and outlet loca-tions will be 180° opposite.
ALL ORDERS ARE NON-RETURNABLE AND
NON-CANCELABLE.
ALSCO NeutratankTM Neutralization TanksBlack High Density Polyethylene, Cylindrical Neutralization Tanks - PE
Vents for All Polyethylene Neutralization Tanks
Enfield pH Monitoring & Recording System
Also Available P.O.A.
Part # Gallon Size Cover Type Size Price5370 5 EZ 1 1/2” Plain End $ 289.405371 5 EZ 2” Plain End 303.205372 5 Bolted 1 1/2” Plain End 289.405373 5 Bolted 2” Plain End 303.205374 15 EZ 2” Plain End 430.855375 15 EZ 3” Plain End 480.855376 15 Bolted 2” Plain End 430.855377 15 Bolted 3” Plain End 480.905378 30 EZ 2” Plain End 583.005379 30 EZ 3” Plain End 670.255380 30 EZ 4” Plain End 776.605381 30 Bolted 2” Plain End 478.755382 30 Bolted 3” Plain End 531.955383 30 Bolted 4” Plain End 595.755384 55 EZ 3” Plain End 744.705385 55 EZ 4” Plain End 824.505386 55 Bolted 3” Plain End 601.105387 55 Bolted 4” Plain End 664.905388 100 EZ 3” Plain End 861.705389 100 EZ 4” Plain End 930.855390 100 Bolted 3” Plain End 750.005391 100 Bolted 4” Plain End 813.85
Part # Gallon Size Cover Type Size Price5392 - - 1 1/2” Plain End $ 30.205393 - - 2” Plain End 33.755394 - - 3” Plain End 47.905395 - - 4” Plain End 62.10
Description Part # PricepH Monitor w/ 5 gal. Sampling Tank & Alarm 5396 $ 9324.95
Inlet / Outlet Sizes & ConnectionsI / O Tank Size1 1/2” Plain End 5 to 55 gal1 1/2” MPT or FPT 5 to 55 gal2” Plain End 5 to 150 gal2” MPT or FPT 5 to 150 gal3” Plain End 15 to 500 gal3” MPT or FPT 15 to 500 gal3” Flanged 30 to 500 gal4” Plain End 30 to 2000 gal4” MPT or FPT 30 to 2000 gal4” Flanged 30 to 2000 gal6” Flanged 350 to 2000 gal
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Acid Waste System
99
ALSCO
Features• PVDF, Mechanical Joint, Flame Retardant• Temp range: -40°F to 285°F• Low cost and easy installation• High impact strength and flexibility• Long term reliability, re-usable• Exceptional chemical resistance
Applications• Highly restrictive return air plenums• High-temp corrosive chemical waste• Chemical labs:
High Schools UniversitiesHospitals Research FacilitiesPharmaceutical R&D
NOTE: ALL FITTINGS ARE FURNISHED ASSEMBLED WITH OLIVES AND UNION NUTS.
Features• PVDF, Mechanical Joint, Flame Retardant• Temp range: -40°F to 285°F• Low cost and easy installation• High impact strength and flexibility• Long term reliability, re-usable• Exceptional chemical resistance
Applications• Highly restrictive return air plenums• High-temp corrosive chemical waste• Chemical labs:
High Schools UniversitiesHospitals Research FacilitiesPharmaceutical R&D
NOTE: ALL FITTINGS ARE FURNISHED ASSEMBLED WITH OLIVES AND UNION NUTS.
Features:• Complete System of Pipe, Fittings & Adapters• All CPVC Construction in Full Assortment of Standard DWV Patterns• Custom Fabricated Accessories - Drains, Neutralization Tanks & Pump Stations• Specially Formulated One-Step Solvent Cement Provides Chemical Resistance
Equal to System Pipe & Fittings• ULC Flame & Smoke Rated• Full Technical Support
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Neutralization TanksNeutralization tanks allow pH balancing ofcorrosive wastes prior to disposal. Customproduced to virtually any capacity. LabWasteTM
Complete Tank & Pump StationTank & Pump Station provides collection of corrosive waste for Neutralization, holding, or transfer.
LabWasteTM
Fume Hoods & Wet Process StationsFull cabinet or counter-top models built to specifications
LabWasteTM
Laboratory FixturesStandard and Recirculating designs
Spears® LabWasteTM
Custom System Accessories
Acid Waste System
CPVC Solvent Cement(Primerless, One Step)
Pipe Diameter Number of Joints1/2” 3003/4” 2001” 125
1 1/2” 902” 603” 404” 306” 108” 5
10” 2-312” 1-215” 3/418” 1/2
These figures are based on laboratorytests. Due to many field variations, theseshould be used as a general guide only.
Size Part # PriceQuart LW5-030 33.62Gallon LW5-040 123.22
Spears® LabWaste™ Custom System AccessoriesComplete drainage waste systems are composed of more than just pipe
and fittings. We offer custom fabrication of virtually any system accessory for use with LabWaste CPVC Corrosive Waste Drainage Sys-tems such as Floor Drains, Collection Tanks, Neutralization Tanks, andPump Stations. Plus, custom built supplemental equipment including
Fume Hoods, Wet-Stations, Laboratory Faucets and much more.
104
ALSCO Compressed Air Piping SystemASAHI Air-ProTM Compressed Air Piping System
The Air-Pro piping system is specifically constructed for compressed air. Ithas been extensively tested in numerous compressed applications, allowingAsahi/America to offer a safe, reliable system with the many advantages ofthermoplastic construction. These include convenient light weight, faster/lower cost/more flexible installation, minimal system pressure drop, andcorrosion resistance.The Air-Pro system is composed of Solvay TUB 124 blue high density poly-ethylene (HDPE) resin which is extremely ductile. The pipe will expand at thepoint of failure and tear open without fragmentation. Burst pressure testinghas conclusively shown that this system would fail leaving only a small safetear. The system can handle operating pressure of 230 psi with a safety factorof 2.5.
Pipe * 16.4 ft. Lengths (Sold in 5 meter lengths only)Size Part Price * Price * Outside Wall Wt. PerIPS # Per Ft. Length Dia. (in.) (in.) Ft. (lbs.)1/2 9500-005 $ 1.27 $ 20.90 0.79 0.120 0.103/4 9500-007 1.88 30.90 0.98 0.135 0.161 9500-010 3.16 51.80 1.26 0.175 0.26
(1000 PSI and higher)• Polycarbonate crystal • Black aluminum pointer• Brass movement with high finish bearing surface• Ambient temperature range of -10F° to +140F
All Stainless Steel Gauges2 1/2" Face
1/4" Lower MountDRY GAUGE
Designed for severe service application.
Stainless Steel Gauges provide the corrosion resistance and durability of a permanently sealed gauge.• 316 series stainless steel solid back case
with Polycarbonate window• 1/4" LM stainless steel connector• 316 stainless steel bourdon tube• 316 series stainless steel movement with
SS steel internals• Ambient temperature range of 0F° to +150F°
PSI PART # PRICE
0-15 1446 $ 14.25
0-30 1447 14.25
0-60 1448 14.25
0-100 1449 14.25
0-160 1450 14.25
0-200 1451 14.25
0-300 1452 14.25
PSI PART # PRICE
0-15 1453 $ 91.20
0-30 1454 91.20
0-60 1455 91.20
0-100 1456 91.20
0-160 1457 91.20
0-200 1458 91.20
0-300 1459 91.20
All Stainless Steel Gauges2 1/2" Face
1/4" Lower MountLIQUID FILLED GAUGE
Designed for severe service application.
Stainless Steel Liquid Filled Gauges provide the corrosion resistance and durability of a permanently sealed gauge.• 2 1/2" 316 series stainless steel solid back
case with Polycarbonate window• 1/4" LM stainless steel connector• 316 stainless steel bourdon tube• 316 series stainless steel movement with
SS steel internals• Glycerin filled • Ambient temperature range of 0F° to +150F°
ALSCO Chem-Aire Piping SystemAll plastic compressed air piping system that combines purity of thermoplastic with the toughnessof metal... perfect for industries that require contaminant-free environments such as food, beverageand pharmaceutical processing as well as semiconductor, and metal finishing applications. Ideal formost corrosive environments. Requires no exterior painting * and resist corrosives inside and out.Manufactured from a specially engineered acrylonitrile butadiene styrene (ABS) for high impactresistance and ductility, Chem-Aire pipe, valves, and fittings provide clean, efficient air and gashandling with a pressure rating up to 185 psi at 110°F. Corrosion resistant piping material eliminates internal dirt, rust, or scaling. Superior joint integritywith solvent cemented joints guarantees zero leakage. Joints are made in minutes, reducing installa-tion cost by up to 50%. Color coded piping material in distinctive green visually separates Chem-Aire from other piping systems.Dimensions/Design: Pipe- Iron Pipe Size (IPS) outside diameters with heavy-duty wall. Fittings- aredesigned to Schedule 80 dimensions with industrial heavy-duty hub style design. Solvent Cements-heavy-duty thick viscosity, light green in color for easy identification and use.Pressure/Temperature Ratings: Pipe and Fittings- continuous use at 185 psi at 110°F.Valves, Unions, and Flanges- for continuous use at 150 psi at 100°F.
* Unless exposed to direct sunlight or other source of UV radiation.
PipeSize Part Price Outside Minimum Wt. PerIPS # Per Ft. Dia. (in.) Wall (in.) Ft. (lbs.)1/2 5900-005 $ 1.68 0.840 0.094 0.1073/4 5900-007 2.51 1.050 0.118 0.1651 5900-010 3.66 1.315 0.147 0.256
Color: GreenNote: Most compressor lubricating oils can be used with Chem-Aire. However, synthetic oils &some additives can cause deterioration. Please Contact our sales office for detailed informationon compatible oils.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Size Part # Price $ Part # Price1/8" 1438 101.00 1439 $ 92.851/4" 1440 101.00 1441 92.85
Space-saving filter/regulator offering two functions in one unit.Standard model: 2-100 PSIG adjustable range, relieving type diaphragm, transparent bowl (guard not available), 5-micronfilter element, gauge, non-rising adjustment with easily sealedlock ring to resist tampering. ONE OUNCE RESERVOIR.
MINI COMBINATION (Filter, Air Regulator, Lubricator)
AUTOMATIC DRAIN MANUAL DRAIN
Size Part # Price $ Part # Price
1/8" 1442 215.60 1443 $ 207.75
1/4" 1444 216.50 1445 208.65
Blow Gun, Air - Rubber TippedProvides leakproof seal between gun and fluid lineor other opening. Also excellent for cleaning moldsor delicate surfaces where a metal tip might scratchor otherwise harm critical areas.
Part # 1422 Price $18.05
CAUTION: This blow gun does not have a safety by-pass to prevent build-up oftip pressure in the event of tip blockage. It may be used for cleaning purposesonly if the air supply (inlet pressure) has been reduced to 30 PSI or less.
1/4" female NPT inlet
Comes standard withswivel on one end.
Yellow in color.
MINI FILTERSAUTOMATIC DRAIN MANUAL DRAIN
Size Part # Price $ Part # Price1/8" 1430 54.75 1431 $ 46.901/4" 1432 54.75 1433 46.90
Designed for use where performance is required in a min.space. Transparent bowls, 5-micron element standard.
“Coil-Chief” Self - Storing Air HoseMale NPT Length Part # Price
1/4" 1/4" x 12' 1423 $ 21.901/4" 1/4" x 25' 1424 30.501/4" 1/4" x 50' 1425 54.003/8" 3/8" x 25' 1426 52.803/8" 3/8" x 50' 1427 93.001/2" 1/2" x 25' 1428 106.701/2" 1/2" x 50' 1429 162.30
MINI REGULATORSWITH GAUGE WITHOUT GAUGE
Size Part # Price $ Part # Price1/8" 1434 50.90 1435 $ 36.451/4" 1436 50.90 1437 36.45Relieving Type Standard models adjustable 3-100 PSIG.Compact unit gives reliable regulation at flows up to 15scfm at 100 PSIG.
108
Compressed Air ABS Piping System
ALSCO IPEX Duraplus® Air Line SystemThe Air-Line SystemAir-Line is a thermoplastic socket piping system for conveying compressed air. Its lightness in weightand ease of installation results overall cost savings, while its inherent corrosion resistance makes itthe ideal choice for clean air applications.
Benefits Ratings• Manufactured for conveying compressed air • 1/2” - 4” pipe and fitting rated 185 psi at 73°F• Color coated in light blue for color coding • 1/2” - 4” metric sized and blue in color• Leak free and energy saving • 6” & 8” rated 180 psi and 145 psi respectively• Maintenance free • No rust, inside or out • 6” & 8” are IPS sized and grey in color• Light weight • Easy installation, Socket• Non-toxic • Keeps air clean
Safety FactorsAir-Line has two built-in safety factors in sizes 1/2” to 4”:1. It has a highly visible, light blue coloring complying with international standards for compressed
air piping.2. Manufactured to metric standards and is dimensionally incompatible with IPS sized rigid
materials. IPS sized rigid piping is dangerous and cannot be introduced into the system.
PipeSize Size Part PriceIPS Metric # Per Ft.1/2 20 5471-005 $ 1.453/4 25 5471-007 2.151 32 5471-010 3.20
Color: BlueWarning: Certain compressor and lubricant oilswill damage your Duraplus® Air-line installation. Before using any oils in the system contact oursales office to obtain a list of recommended oilsor to confirm individual oil suitability.
Size Size Part PriceIn. mm # $1/2 20 5473-005 8.053/4 25 5473-007 10.001 32 5473-010 14.90
Note: A backing ring must beused with this flange.
An indication of the number of joints likely to be made per quart of Duraplus®cement is as follows (it is recommended that MEK Cleaner order equals one-halfthe quantity of solvent cement required).
Warning: Certain compressor and lubricant oils will dam-
age your Duraplus® Air-line installation.
Before using any oils in the system contact our sales office
to obtain a list of recommended oils or to confirm individual
oil suitability.
Compressed Air ABS Piping System
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
110
ALSCO Asahi - Proline® Piping SystemASAHI Polypropylene Proline® Piping System
Proline is a high molecular weight copolymer propylene that is 36% lighter than PVC. It contains a stabilizer to help resist the effects of corrosive hotliquids over long periods of time. Proline combines excellent chemical resis-tant and strength at operating temperatures higher than those possible withPVC. System components range from 1/2” through 24”, and are recommendedfor use in the temperature range of 15°F to 200°F.
Note: Pipe sold in 16.4 ft. lengths
Proline PIPE - Butt Fusion (Pipe sold in 16.4 ft. lengths)Chemical Grade High Purity
SDR 11 / PN 10 SDR 32 / PN 3.2 SDR 11 / PN 10Pro 150 Pro 45 Pro 150
Size Inch Part # Price Per Ft. Part # Price Per Ft. Part # Price Per Ft.1/2 5001-005 $ .90 - - 9901-005 $ 2.103/4 5001-007 1.20 - - 9901-007 2.901 5001-010 1.70 - - 9901-010 4.10
Proline Ext. Leg Concentric Reducer - Butt FusionChemical Grade High PuritySDR 11 / PN 10 SDR 11 / PN 10
Pro 150 Pro 150Size Inch Part # Price Part # Price3/4 x 1/2 5038-101 $ 5.80 9938-101 $ 14.101 x 1/2 5038-130 6.30 9938-130 15.701 x 3/4 5038-131 6.30 9938-131 15.70
1 1/4 x 1/2 5038-166 9.10 9938-166 18.001 1/4 x 3/4 5038-167 9.10 9938-167 18.001 1/4 x 1 5038-168 9.10 9938-168 18.00
1 1/2 x 3/4 5038-210 11.20 9938-210 22.501 1/2 x 1 5038-211 11.20 9938-211 22.50
1 1/2 x 1 1/4 5038-212 11.20 9938-212 22.502 x 1 5038-249 14.90 9938-249 30.00
2 x 1 1/4 5038-250 14.90 9938-250 30.002 x 1 1/2 5038-251 14.90 9938-251 30.00
2 1/2 x 1 1/2 5038-291 23.20 9938-291 46.202 1/2 x 2 5038-292 23.20 9938-292 46.20
3 x 2 5038-338 32.40 9938-338 64.703 x 2 1/2 5038-339 32.70 9938-339 65.10
4 x 2 5038-420 43.60 9938-420 87.104 x 3 5038-422 43.60 9938-422 87.106 x 3 5038-531 100.40 9938-531 200.606 x 4 5038-532 112.60 9938-532 201.808 x 6 5038-585 143.30 9938-585 229.30
Proline Ext. Leg Eccentric Reducer - Butt FusionChemical Grade High Purity
SDR 11 / PN 10 SDR 11 / PN 10Pro 150 Pro 150
Size Inch Part # Price Part # Price3/4 x 1/2 5037-101 $ 6.00 9937-101 $ 15.001 x 1/2 5037-130 - 9937-130 -1 x 3/4 5037-131 9.40 9937-131 17.50
1 1/4 x 1/2 5037-166 - 9937-166 -1 1/4 x 3/4 5037-167 - 9937-167 -1 1/4 x 1 5037-168 9.40 9937-168 19.50
1 1/2 x 3/4 5037-210 - 9937-210 -1 1/2 x 1 5037-211 11.60 9937-211 23.80
1 1/2 x 1 1/4 5037-212 11.60 9937-212 23.802 x 1 5037-249 15.70 9937-249 32.00
2 x 1 1/4 5037-250 15.70 9937-250 32.002 x 1 1/2 5037-251 15.70 9937-251 32.00
2 1/2 x 1 1/2 5037-291 24.10 9937-291 49.202 1/2 x 2 5037-292 24.10 9937-292 49.20
3 x 2 5037-338 34.20 9937-338 69.403 x 2 1/2 5037-339 34.20 9937-339 69.40
4 x 2 5037-420 45.70 9937-420 93.104 x 3 5037-422 45.70 9937-422 93.106 x 3 5037-531 105.10 9937-531 214.306 x 4 5037-532 105.10 9937-532 214.308 x 6 5037-585 149.00 9937-585 243.00
Proline Male Adapter - Butt FusionChemical Grade High PuritySDR 11 / PN 10 SDR 11 / PN 10
Pro 150 Pro 150Size Inch Part # Price Part # Price
Male Adapters use butt fused adaptersin conjunction with a coupling.
Female AdapterSocket Pro 150
Size Inch Part # Price1/2 5084-005 $ 11.203/4 5084-007 12.701 5084-010 16.60
1 1/4 5084-012 19.001 1/2 5084-015 37.50
Union / VitonSocket Pro 150
Size Inch Part # Price1/2 5097-005 $ 27.603/4 5097-007 33.101 5097-010 43.90
1 1/4 5097-012 61.501 1/2 5097-015 87.80
CapSocket Pro 150
Size Inch Part # Price1/2 5081-005 $ 7.303/4 5081-007 8.101 5081-010 10.40
1 1/4 5081-012 11.001 1/2 5081-015 12.10
2 5081-020 13.002 1/2 5081-025 38.80
3 5081-030 40.804 5081-040 55.70
Union / EPDMSocket Pro 150
Size Inch Part # Price1/2 5092-005 $ 27.603/4 5092-007 33.101 5092-010 43.90
1 1/4 5092-012 61.501 1/2 5092-015 87.80
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Asahi Welding TechnicalData and Welding Parameters
See pages 429-436
116
ALSCO
* Pipe price per foot. 16.4 foot lengths.
Asahi-PolyPureTM Piping SystemASAHI PolyPureTM Natural Polypropylene Piping System
The PolyPure™ Natural Polypropylene System provides a cost effectivealternative for a system up to 4" (110mm). PolyPure pipe is cleanroom pro-duced. Fittings and valves are also produced in a class 100 cleanroom,then hot DI rinsed and individually packaged. No other supplier goes tosuch great measures to provide a pure polypropylene system. • IR / Contact Butt Fusions: 1/2” - 4”, 150 PSI• Socket Fusion: 1/2” - 2”, 150 PSI
Polypropylene PolyPureTM Piping System - IR / Butt Fusion Pipe and Fittings
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Pipe*IR/Butt Fusion
Size Inch Part # Price1/2 6301-005 .703/4 6301-007 .961 6301-010 1.34
1 1/4 6301-012 2.071 1/2 6301-015 3.21
2 6301-020 5.093 6301-030 9.904 6301-040 14.75
TeeIR/Butt Fusion
Size Inch Part # Price1/2 6318-005 6.103/4 6318-007 6.101 6318-010 7.60
1 1/4 6318-012 11.401 1/2 6318-015 15.40
2 6318-020 23.903 6318-030 71.804 6318-040 105.40
CapIR/Butt Fusion
Size Inch Part # Price1/2 6343-005 8.903/4 6343-007 9.701 6343-010 12.30
1 1/4 6343-012 15.201 1/2 6343-015 19.80
2 6343-020 26.203 6343-030 80.004 6343-040 100.00
Union/EPDMIR/Butt Fusion
Size Inch Part # Price1/2 6333-005 29.203/4 6333-007 37.001 6333-010 45.50
1 1/4 6333-012 63.501 1/2 6333-015 88.50
2 6333-020 132.30
Union/FKMIR/Butt Fusion
Size Inch Part # Price1/2 6334-005 29.203/4 6334-007 37.001 6334-010 45.50
7861-077 1/2” x Close 2.097861-078 1/2” x Short 2.237861-081 1/2” X 3” 2.977861-082 1/2” X 4” 3.447861-083 1/2” X 5” 3.917861-084 1/2” X 6” 4.41
Part # Dia. x Length Price
7861-104 3/4” x Close 2.827861-105 3/4” X Short 3.217861-106 3/4” X 3” 3.847861-107 3/4” X 4” 4.507861-108 3/4” X 5” 5.137861-109 3/4” X 6” 5.79
Part # Dia. x Length Price
7861-133 1” x Close 3.647861-134 1” X Short 4.857861-136 1” X 3” 7.287861-137 1” X 4” 9.717861-138 1” X 5” 12.137861-139 1” X 6” 14.56
Part # Dia. x Length Price
7861-213 1 1/2” x Close 5.947861-214 1 1/2” X Short 7.397861-215 1 1/2” X 3” 8.367861-216 1 1/2” X 4” 10.287861-217 1 1/2” X 5” 12.217861-218 1 1/2” X 6” 14.18
Part # Dia. x Length Price
7861-251 2” x Close 7.987861-252 2” X Short 9.307861-253 2” X 3” 10.637861-254 2” X 4” 13.257861-255 2” X 5” 15.877861-256 2” X 6” 18.52
Natural PP Schedule 80 Nipples
NOTE: All threaded fittings are recommended for intermittent drainagepressure not exceeding 20 psi.
Socket Heat Face Sets
Description Part # Price
1/2” Socket Heat Face Set 4820-005 $ 65.15
3/4” Socket Heat Face Set 4820-007 65.15
1” Socket Heat Face Set 4820-010 65.15
1 1/2” Socket Heat Face Set 4820-015 79.35
2” Socket Heat Face Set 4820-020 79.35
3” Socket Heat Face Set 4820-030 133.00
4” Socket Heat Face Set 4820-040 137.00
6” Socket Heat Face Set 4820-060 490.00
Chemtrol’s Thermo-Fusion Socket Heating Times
Size PP PVDF
In (mm) Time (sec) Temp (°F) Time (sec) Temp (°F)
1/2” (20) 5 495-505 5 495-505
3/4” (25) 5 495-505 5 495-505
1” (32) 5 495-505 5 495-505
1 1/2” (50) 5 495-505 5 495-505
2” (63) 5 495-505 5 495-505
3” (90) 7 - 9 500-510 25 - 35 510-530
4” (110) 12 - 15 500-510 40 - 50 510-530
6” 15 - 20 500-520 50 - 60 540-560
The heat face set consists of a male and female component.This is a matched set and cannot be ordered separately.
Heating Times start after Pipe and Fitting are completely on Heater Faces.Chemtrol recommends using a Fusion Machine for sizes 3” and larger.
122
ALSCO Black Polypropylene - Sch. 80
Pipe Size Part Price Approx. Max. W.P. O.D. Minimum WallIn. mm # Per Ft. Wt./ Per Ft. @ 73.4 °F (In.) Thickness (In.)
• Full range of IPS sizes in 1/2" through 6" in diameter.• Rigid PP used in the manufacture of industrial piping components
conform to requirements in ASTM D-4101.• For maximum UV radiation protection, PP shall be pigmented jet black
with a minimum 2.5% carbon black.• Fitting components that utilize socket type heat fusion welded con-
nections shall have socket lengths and wall thicknesses as required for Schedule 80 fittings inASTM D-2467.
• Pipe shall have diameters and wall thicknesses in conformance with ASTM D-1785 Schedule 80 pipe. Fittings shall be industrial, heavy duty, hub style.
NOTE: All threaded fittings: Recommended for intermittent drainage pressure not exceeding 20 psi.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
2861-077 1/2” x Close 1.632861-078 1/2” x Short 1.752861-080 1/2” x 2” 2.052861-081 1/2” X 3” 2.432861-082 1/2” X 4” 2.812861-083 1/2” X 5” 3.212861-084 1/2” X 6” 3.66
Part # Dia. x Length Price
2861-104 3/4” x Close 2.272861-105 3/4” X Short 2.482861-106 3/4” X 3” 3.012861-107 3/4” X 4” 3.522861-108 3/4” X 5” 4.042861-109 3/4” X 6” 4.62
Part # Dia. x Length Price
2861-133 1” x Close 2.862861-134 1” X Short 3.152861-135 1” X 3” 3.922861-136 1” X 4” 4.562861-137 1” X 5” 5.272861-138 1” X 6” 5.95
Part # Dia. x Length Price
2861-213 1 1/2” x Close 3.662861-214 1 1/2” X Short 4.252861-215 1 1/2” X 3” 4.722861-216 1 1/2” X 4” 5.562861-217 1 1/2” X 5” 6.552861-218 1 1/2” X 6” 7.43
Part # Dia. x Length Price
2861-170 1 1/4” x Close 3.292861-171 1 1/4” X Short 4.042861-172 1 1/4” X 3” 4.412861-173 1 1/4” X 4” 5.192861-174 1 1/4” X 5” 6.092861-175 1 1/4” X 6” 6.88
Part # Dia. x Length Price
2861-251 2” x Close 4.932861-252 2” X Short 5.432861-253 2” X 3” 6.092861-254 2” X 4” 7.272861-255 2” X 5” 8.282861-256 2” X 6” 9.57
Part # Dia. x Length Price
2861-338 3” x Close 11.292861-340 3” X Short 13.632861-341 3” X 4” 13.632861-342 3” X 5” 17.212861-343 3” X 6” 19.77
Part # Dia. x Length Price
2861-422 4” x Close 15.382861-423 4” X Short 19.012861-425 4” X 5” 23.122861-426 4” X 6” 27.23
Black PP Schedule 80 Nipples
NOTE: All threaded fittings are recommendedfor intermittent drainage pressure notexceeding 20 psi.
124
* Supplied in 5 Meter lengths (16.4’) ** Butt Fusion Only
* Requires Backing Ring ** Use 8” Backing Ring *** Butt Fusion Only
ALSCO Asahi - PuradTM Piping SystemASAHI PVDF PuradTM Piping System
PuradTM is composed of 100% PVDF with absolutely no colorants or stabilizing addi-tives, Super-Proline offers the broadest corrosion protection for the chemical pro-cessing industries, pulp mill bleaching, bromide processing, and electronic productsmanufacturing in both metal etching operations and ultrapure deionized water lines.Impact strength is 2-3 times that of any other type of PVDF, and that strength is maintained in the temperature range of 22° F to over 300° F. Pipe and fitting compo-nents range from 1/2” through 12”.
Purad PVDF PIPE * - Butt Fusion, IR (Pipe sold in 16.4 ft. lengths)High Purity General
2 1/2 x 2 - - - - 5448-292 500.003 x 1/2 - - 5436-332 $ 544.00 5448-332 544.003 x 3/4 - - 5436-333 544.00 5448-333 544.003 x 1 - - 5436-336 544.00 5448-336 544.00
3 x 1 1/4 - - 5436-335 544.00 5448-335 544.003 x 1 1/2 - - 5436-337 544.00 5448-337 544.004 x 1/2 - - 5436-399 640.00 5448-399 640.004 x 3/4 - - 5436-404 640.00 5448-404 640.004 x 1 - - 5436-401 640.00 5448-401 640.00
4 x 1 1/4 - - 5436-412 640.00 5448-412 640.004 x 1 1/2 - - 5436-415 640.00 5448-415 640.00
6 x 1 - - 5436-516 1100.00 - -8 x 2 - - 5436-581 1391.00 - -8 x 3 5438-582 $ 1391.00 5436-582 1391.00 - -8 x 4 5438-583 1391.00 5436-583 1391.00 - -8 x 6 5438-585 1391.00 5436-585 1391.00 - -
ASAHI Purad PVDF Piping System - Butt Fusion, IR
* Components machined. Consult factory for clamp sizes and pressure rating. Clamp sizedesigned to fit TriClamp connection. Does not include clamp or gasket.
Pipe x Flare Transition Fitting(Designed to be Butt/IR Weld by Thd. Tube Flare)
SDR 21 x Flare
Size Part # Price20mm x 1/4” 5406-096 $ 55.9020mm x 3/8” 5406-098 59.9020mm x 1/2” 5406-005 64.9025mm x 3/8” 5406-106 64.9025mm x 1/2” 5406-101 70.4025mm x 3/4” 5406-007 74.0032mm x 1/2” 5406-130 83.0032mm x 3/8” 5406-105 82.8032mm x 3/4” 5406-131 92.0032mm x 1” 5406-010 104.60
Sanitary EndsHigh Purity *
(Designed to fit Triclover Clamps)Pipe Clamp SDR 21 Size Size Part # Price
4861-077 1/2” x Close 15.354861-078 1/2” x Short 17.964861-081 1/2” X 3” 21.894861-082 1/2” X 4” 23.794861-083 1/2” X 5” 27.084861-084 1/2” X 6” 32.61
Part # Dia. x Length Price
4861-104 3/4” x Close 19.764861-105 3/4” X Short 21.894861-106 3/4” X 3” 24.084861-107 3/4” X 4” 27.084861-108 3/4” X 5” 32.614861-109 3/4” X 6” 38.97
Part # Dia. x Length Price
4861-133 1” x Close 24.624861-134 1” X Short 27.714861-135 1” X 3” 32.614861-136 1” X 4” 39.594861-137 1” X 5” 48.134861-138 1” X 6” 59.62
Part # Dia. x Length Price
4861-213 1 1/2” x Close 36.244861-214 1 1/2” X Short 41.134861-215 1 1/2” X 3” 55.254861-216 1 1/2” X 4” 62.384861-217 1 1/2” X 5” 77.614861-218 1 1/2” X 6” 95.89
Part # Dia. x Length Price
4861-251 2” x Close 42.884861-252 2” X Short 62.024861-253 2” X 3” 71.554861-254 2” X 4” 108.004861-255 2” X 5” 134.004861-256 2” X 6” 159.00
Natural PVDF Schedule 80 Nipples
NOTE: All threaded fittings are recommended for intermittent drainagepressure not exceeding 20 psi.
Socket Heat Face Sets
Description Part # Price
1/2” Socket Heat Face Set 4820-005 $ 65.15
3/4” Socket Heat Face Set 4820-007 65.15
1” Socket Heat Face Set 4820-010 65.15
1 1/2” Socket Heat Face Set 4820-015 79.35
2” Socket Heat Face Set 4820-020 79.35
3” Socket Heat Face Set 4820-030 133.00
4” Socket Heat Face Set 4820-040 137.00
6” Socket Heat Face Set 4820-060 490.00
Chemtrol’s Thermo-Fusion Socket Heating Times
Size PP PVDF
In (mm) Time (sec) Temp (°F) Time (sec) Temp (°F)
1/2” (20) 5 495-505 5 495-505
3/4” (25) 5 495-505 5 495-505
1” (32) 5 495-505 5 495-505
1 1/2” (50) 5 495-505 5 495-505
2” (63) 5 495-505 5 495-505
3” (90) 7 - 9 500-510 25 - 35 510-530
4” (110) 12 - 15 500-510 40 - 50 510-530
6” 15 - 20 500-520 50 - 60 540-560
The heat face set consists of a male and female component.This is a matched set and cannot be ordered separately.
Heating Times start after Pipe and Fitting are completely on Heater Faces.Chemtrol recommends using a Fusion Machine for sizes 3” and larger.
135
ALSCO PVDF (Kynar) Red -Sch. 80Features
• Less than metals to buy and install.• Longer product life.• Resists corrosion.• Easy to install.
Excellent chemical resistanceKynar systems resist distortion, retain their strength, and resistmost acids, bases and organic sol- vents to temperatures up to 280°F.
Product & design criteria• 1/2”- 6” socket and 1/2”- 2” thread• IPS may be installed above or
below ground• Temperature range 0° - 280°F
Lower installed costsbecause it is light in weight, instal- lation requires less time and lessequipment than other materials.
Pipe Size Part Price Approx. Max. W.P. O.D. Minimum WallIn. mm # Per Ft. Wt./ Per Ft. @ 73°F (In.) Thickness (In.)
3861-077 1/2” x Close 15.283861-078 1/2” x Short 17.133861-081 1/2” X 3” 20.883861-082 1/2” X 4” 22.643861-083 1/2” X 5” 25.783861-084 1/2” X 6” 31.05
Part # Dia. x Length Price
3861-104 3/4” x Close 18.813861-105 3/4” X Short 20.883861-106 3/4” X 3” 22.923861-107 3/4” X 4” 25.783861-108 3/4” X 5” 31.053861-109 3/4” X 6” 37.09
Part # Dia. x Length Price
3861-133 1” x Close 22.923861-134 1” X Short 26.403861-135 1” X 3” 31.053861-136 1” X 4” 37.723861-137 1” X 5” 45.833861-138 1” X 6” 56.83
Part # Dia. x Length Price
3861-213 1 1/2” x Close 34.513861-214 1 1/2” X Short 39.163861-215 1 1/2” X 3” 47.823861-216 1 1/2” X 4” 59.393861-217 1 1/2” X 5” 73.923861-218 1 1/2” X 6” 91.35
Part # Dia. x Length Price
3861-251 2” x Close 40.843861-252 2” X Short 68.153861-253 2” X 3” 82.693861-254 2” X 4” 103.003861-255 2” X 5” 126.003861-256 2” X 6” 151.00
Red PVDF Schedule 80 Nipples
NOTE: All threaded fittings are recommended for intermittent drainagepressure not exceeding 20 psi.
Socket Heat Face Sets
Description Part # Price
1/2” Socket Heat Face Set 4820-005 $ 65.15
3/4” Socket Heat Face Set 4820-007 65.15
1” Socket Heat Face Set 4820-010 65.15
1 1/2” Socket Heat Face Set 4820-015 79.35
2” Socket Heat Face Set 4820-020 79.35
3” Socket Heat Face Set 4820-030 133.00
4” Socket Heat Face Set 4820-040 137.00
6” Socket Heat Face Set 4820-060 490.00
Chemtrol’s Thermo-Fusion Socket Heating Times
Size PP PVDF
In (mm) Time (sec) Temp (°F) Time (sec) Temp (°F)
1/2” (20) 5 495-505 5 495-505
3/4” (25) 5 495-505 5 495-505
1” (32) 5 495-505 5 495-505
1 1/2” (50) 5 495-505 5 495-505
2” (63) 5 495-505 5 495-505
3” (90) 7 - 9 500-510 25 - 35 510-530
4” (110) 12 - 15 500-510 40 - 50 510-530
6” 15 - 20 500-520 50 - 60 540-560
The heat face set consists of a male and female component.This is a matched set and cannot be ordered separately.
Heating Times start after Pipe and Fitting are completely on Heater Faces.Chemtrol recommends using a Fusion Machine for sizes 3” and larger.
137
ALSCO
Pipe Size Part Price Average Max. W.P. Average Minimum WallIn. Number Per Ft. OD @ 73°F * ID Thickness1/2 LXT-005 $ 3.67 .840 420 .528 .1473/4 LXT-007 4.97 1.050 340 .724 .1541 LXT-010 7.32 1.315 320 .935 .179
Harvel LXT® Low-Extractable Piping For Ultra-Pure Water Systems• PVC pipe, fittings and valves, IPS Sizes 1/2” - 6 diameters• Strong Schedule 80 dimensions for pressure service• Harvel LXT® material significantly reduces leachable contamination compared
to conventional PVC and other piping materials.• Exceptional smooth interior walls reduce particle contaminants• Fast, reliable installation with simple, inexpensive joining methods• Proprietary one-step fast setting joining method reduces TOC contimination
and rinses up quickly• Chemical/corrosion resistance, high-impact strength, low thermal conductivity• Bagged, sealed and boxed on-line for use in high-purity environments• High Quality • Low Maintenance • Cost Effective • Socket Joining
Pipe, Fittings &Valves are
Translucent with Blue Tint
Note: Standard length — 15 feet. All pipe is double-bagged and boxed for high purity * PSI water, non-shock @ 73°F with solvent welded connections.
Rated @ 150 PSIWP @ 73°F
Harvel LXT® Clear Ultra Pure Pipe System
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Note: Hole through tank wall should be equal to orup to 1/32” larger than the nominal body OD.
140
ALSCO Double Contained Piping SystemsWhen Leaks are not an option,
Alsco Offers the following Double Containment SolutionGuardian PVC and CPVC pressure and drainage systems
EncaseTM Polypro drainage systemsCustomGuardTM FRP and metal pressure systems
Centra-GuardTM leak detection systemsSystem Features• PVC, CPVC, Polypro, PVDF, FRP, Metal and others• Any combination for the Carrier or Containment pipe• Pre-assembled components that guarantee reliability• Ease of installation, fewer joints (up to 40% less)• Leak detection system
Guardian Vinyl Double Containment Systems
EncaseTM Acid Waste PP Double Containment Systems
For more than 15 years, Guardian systems have been the benchin pressure and drainage double containment. Guardian systemsare available in tough industrial grade PVC and even tougherhigh-temperature CPVC. Guardian’s patented Centra-Lock designrequires up to 40 per cent fewer joints.
At the heart of our patented Encase polypro system is its electro-fusion fitting with a groundbreaking heavy-gauge resistance wiremolded into the socket. The result is a premier system that offersconsiderable reduction of installation time and the highest qualitybubble-tight joints available.
Material Carrier ContainmentPolypro 1 1/2” - 8” 4” - 12”
Encase
The CustomGuardTM Double Containment Systems
Centra-GuardTM Leak Detection System
Custom-designed and fabricated double containment systemsincluding dissimilar material systems. CustomGuard includes avariety of different system choices ranging from PVDF, FRP, andcarbon and stainless steel to hybrid combinations
Innovative and patented leak-detection system ... The initial costis offset tenfold by the savings realized in avoiding the the muchhigher costs of an environmental cleanup or lost production. Nocables to string during installation, no false alarms due to con-densation and always re-usable.
Material Carrier ContainmentPolypro 1 1/2” - 8” 4” - 12”
CustomGuard
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
141
ALSCO Double Contained Piping SystemProtection You Can count on, from the ground up ...Your system will beengineered and designed around your specifications and needs.Features:• Pre - Fab Pipe and Fittings - many combinations • Engineered and Pre-Fab systems available
• Easy installation • Multiple primary pipe in one contained shell
• 100% Pre-tested and Assembled • Dual contained valve boxes
• Dual contained expansion joints, loops and or offsets
• Systems can be purchased as individual components or a complete
fabricated system with very few field joints required.
We offer a wide selection of materials and pressure ranges to choose from. This section shows somecommon material combinations and sizing selections available to meet your requirements. When select-ing the material and its thickness, always consider temperature, pressure and chemical compatibility.
NOTE: PRICING ON APPLICATION
Please contact our Technical Sales Rep for your individual system requirements.
CARRIER CONTAINMENT
1 3
1 1/2 4
2 4
3 6
4 8
6 10
8 12
10 16
12 18
SYSTEM SIZING
NOTE: A typical underground leak detection station. The drip leg arrangement is also double contained.
UNDER GROUND INSTALLATIONExternal Leak Detection
Thermoplastic Dual Containment Piping Material Combinations
PVC80 / PVC80 CPVC40 / PVC40 PVDF / PVDF
PVC80 / PVC40 CPVC80 / CPVC80 HDPE / HDPE
PVC40 / PVC40 CPVC80 / CPVC40 PVC80 / FRP
CPVC80 / PVC80 PP / PP PVC40 / FRP
CPVC80 / PVC40 PP / PE CPVC80 / FRP
CPVC40 / PVC80 PVDF / PP CPVC40 / FRP
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
142
ALSCO Double Containment Piping SystemASAHI Poly-Flo® Double Contained Piping System
Features:• Unitary construction, extruded by a patented process in sizes 1” to 6” (Carrier)• In material of Polypropylene & Polyethylene• Relatively inexpensive and extremely easy to cut and weld• Patented double O-ring flanges allow Poly-Flo to be preassembled, and then easily
bolted into place in the fieldApplications:• Waste Water, carrying sulfuric acid or caustic soda• Chemical Processing, Bulk Storage of sodium hydroxide and aluminum nitrate• Semiconductor plants, handling sulfuric, nitric and hydrofluoric acids for wet
*Other reducing configurations available. Please contact SalesOffice for availability.
146
ALSCO Stainless Steel 316 NipplesStainless Steel Nipples MPT x MPT
All nipples are manufactured from new, mill-tested pipe. All nipples conform to ASTM, A - 312. 150 lbs.
ALSCO Industrial Products, Inc. • 1265 Mount Vernon Rd. • Lithia Springs, GA. 30122 • FAX 770-739-7549
7 7 0 - 9 4 1 - 3 0 3 0 • 1 - 8 0 0 - 8 4 9 - 3 0 3 0 • w w w. a l s c o p l a s t i c s . c o m
Part # Dia.x Length Price8313-005 1/8” x Close 1.508313-015 1/8” x 1 1/2” 1.578313-020 1/8” x 2” 2.338313-025 1/8” x 2 1/2” 2.468313-030 1/8” x 3” 2.468313-035 1/8” x 3 1/2” 2.838313-040 1/8” x 4” 3.148313-045 1/8” x 4 1/2” 3.448313-050 1/8” x 5” 3.748313-055 1/8” x 5 1/2” 4.048313-060 1/8” x 6” 4.058313-070 1/8” x 7” 5.098313-080 1/8” x 8” 5.618313-090 1/8” x 9” 6.298313-100 1/8” x 10” 6.968313-110 1/8” x 11” 7.568313-120 1/8” x 12” 8.32
Part # Dia.x Length Price8314-005 1/4” x Close 1.558314-015 1/4” x 1 1/2” 1.678314-020 1/4” x 2” 2.018314-025 1/4” x 2 1/2” 2.378314-030 1/4” x 3” 2.738314-035 1/4” x 3 1/2” 3.188314-040 1/4” x 4” 3.588314-045 1/4” x 4 1/2” 3.948314-050 1/4” x 5” 4.308314-055 1/4” x 5 1/2” 4.668314-060 1/4” x 6” 5.038314-070 1/4” x 7” 5.938314-080 1/4” x 8” 6.658314-090 1/4” x 9” 7.378314-100 1/4” x 10” 8.198314-110 1/4” x 11” 8.918314-120 1/4” x 12” 9.88
Part # Dia.x Length Price8315-005 3/8” x Close 1.848315-015 3/8” x 1 1/2” 1.968315-020 3/8” x 2” 2.368315-025 3/8” x 2 1/2” 2.798315-030 3/8” x 3” 3.238315-035 3/8” x 3 1/2” 3.768315-040 3/8” x 4” 4.208315-045 3/8” x 4 1/2” 4.568315-050 3/8” x 5” 5.078315-055 3/8” x 5 1/2” 5.508315-060 3/8” x 6” 5.948315-070 3/8” x 7” 7.048315-080 3/8” x 8” 7.908315-090 3/8” x 9” 8.778315-100 3/8” x 10” 9.758315-110 3/8” x 11” 10.488315-120 3/8” x 12” 11.70
Part # Dia.x Length Price8316-005 1/2” x Close 2.428316-015 1/2” x 1 1/2” 3.138316-020 1/2” x 2” 3.018316-025 1/2” x 2 1/2” 3.598316-030 1/2” x 3” 4.168316-035 1/2” x 3 1/2” 4.948316-040 1/2” x 4” 5.488316-045 1/2” x 4 1/2” 6.068316-050 1/2” x 5” 6.638316-055 1/2” x 5 1/2” 7.168316-060 1/2” x 6” 7.788316-070 1/2” x 7” 9.178316-080 1/2” x 8” 10.298316-090 1/2” x 9” 11.478316-100 1/2” x 10” 12.518316-110 1/2” x 11” 13.928316-120 1/2” x 12” 15.08
Part # Dia.x Length Price8317-005 3/4” x Close 3.088317-015 3/4” x 1 1/2” 2.858317-020 3/4” x 2” 3.378317-025 3/4” x 2 1/2” 4.028317-030 3/4” x 3” 5.818317-035 3/4” x 3 1/2” 5.488317-040 3/4” x 4” 6.128317-045 3/4” x 4 1/2” 6.518317-050 3/4” x 5” 7.398317-055 3/4” x 5 1/2” 8.068317-060 3/4” x 6” 8.718317-070 3/4” x 7” 10.238317-080 3/4” x 8” 11.528317-090 3/4” x 9” 12.828317-100 3/4” x 10” 14.148317-110 3/4” x 11” 15.568317-120 3/4” x 12” 16.85
Part # Dia.x Length Price8318-005 1” x Close 4.178318-020 1” x 2” 4.528318-025 1” x 2 1/2” 5.338318-030 1” x 3” 6.248318-035 1” x 3 1/2” 7.288318-040 1” x 4” 8.168318-045 1” x 4 1/2” 9.038318-050 1” x 5” 9.908318-055 1” x 5 1/2” 10.778318-060 1” x 6” 11.638318-070 1” x 7” 13.778318-080 1” x 8” 15.518318-090 1” x 9” 17.258318-100 1” x 10” 19.218318-110 1” x 11” 20.958318-120 1” x 12” 22.88
Part # Dia.x Length Price8319-005 1 1/4” x Close 5.728319-020 1 1/4” x 2” 5.848319-025 1 1/4” x 2 1/2” 6.628319-030 1 1/4” x 3” 8.028319-035 1 1/4” x 3 1/2” 9.968319-040 1 1/4” x 4” 10.548319-045 1 1/4” x 4 1/2” 11.708319-050 1 1/4” x 5” 12.748319-055 1 1/4” x 5 1/2” 13.978319-060 1 1/4” x 6” 15.108319-070 1 1/4” x 7” 17.718319-080 1 1/4” x 8” 19.728319-090 1 1/4” x 9” 22.258319-100 1 1/4” x 10” 24.808319-110 1 1/4” x 11” 27.078319-120 1 1/4” x 12” 29.38
Part # Dia.x Length Price8323-005 3” x Close 28.468323-030 3” x 3” 27.308323-035 3” x 3 1/2” 31.468323-040 3” x 4” 34.808323-045 3” x 4 1/2” 36.278323-050 3” x 5” 39.618323-055 3” x 5 1/2” 42.948323-060 3” x 6” 46.278323-070 3” x 7” 55.888323-080 3” x 8” 62.558323-090 3” x 9” 69.168323-100 3” x 10” 76.708323-110 3” x 11” 83.348323-120 3” x 12” 90.22
Part # Dia.x Length Price8325-005 4” x Close 37.408325-040 4” x 4” 48.978325-045 4 x 4 1/2” 47.858325-050 4” x 5” 52.318325-055 4” x 5 1/2” 56.788325-060 4” x 6” 61.258325-070 4” x 7” 74.008325-080 4” x 8” 82.948325-090 4” x 9” 91.878325-100 4” x 10” 101.928325-110 4” x 11” 110.868325-120 4” x 12” 119.86
Part # Dia.x Length Price8322-005 2 1/2” x Close 20.648322-030 2 1/2” x 3” 20.588322-035 2 1/2” x 3 1/2” 23.828322-040 2 1/2” x 4” 26.418322-045 2 1/2” x 4 1/2” 28.678322-050 2 1/2” x 5” 31.278322-055 2 1/2” x 5 1/2” 33.858322-060 2 1/2” x 6” 36.448322-070 2 1/2” x 7” 42.858322-080 2 1/2” x 8” 48.038322-090 2 1/2” x 9” 53.198322-100 2 1/2” x 10” 59.048322-110 2 1/2” x 11” 64.228322-120 2 1/2” x 12” 69.42
Part # Dia.x Length Price8321-005 2” x Close 10.478321-025 2” x 2 1/2” 10.148321-030 2” x 3” 11.688321-035 2” x 3 1/2” 13.798321-040 2” x 4” 15.488321-045 2” x 4 1/2” 17.168321-050 2” x 5” 18.848321-055 2” x 5 1/2” 20.538321-060 2” x 6” 22.218321-070 2” x 7” 26.318321-080 2” x 8” 29.688321-090 2” x 9” 33.058321-100 2” x 10” 36.818321-110 2” x 11” 40.208321-120 2” x 12” 43.68
Part # Dia.x Length Price8320-005 1 1/2” x Close 6.768320-020 1 1/2” x 2” 6.458320-025 1 1/2” x 2 1/2” 7.738320-030 1 1/2” x 3” 9.078320-035 1 1/2” x 3 1/2” 10.628320-040 1 1/2” x 4” 11.908320-045 1 1/2” x 4 1/2” 13.198320-050 1 1/2” x 5” 14.568320-055 1 1/2” x 5 1/2” 15.768320-060 1 1/2” x 6” 17.048320-070 1 1/2” x 7” 20.068320-080 1 1/2” x 8” 22.888320-090 1 1/2” x 9” 25.488320-100 1 1/2” x 10” 28.098320-110 1 1/2” x 11” 30.668320-120 1 1/2” x 12” 33.28