83 Detachable Rest-A-Back 2.25 lbs 83N Nylon Detachable Rest-A-Back 2.25 lbs Number Description Ship Wt 80 Sam Brown Suspenders 1.25 lbs Number Description Ship Wt Number Description Ship Wt Number Description Ship Wt 88 The Floridian 6.50 lbs Number Description Ship Wt 88G Hip-Grip 8.25 lbs 160NL The Journeyman 6.0 lbs The Journeyman This all-leather belt has a glove-soft cushion, yet is extremely durable. It features full shifting D-rings and is an ideal belt for the line worker who is seeking a good value in a belt. The Floridian This all-leather tool belt features a 5-1/2” padded section for back support and climbing comfort with shifting D-rings. BASHLIN Linemen Tool Belts & Accessories 5 Hip-Grip Back Support This all-leather tool belt helps relieve strain and fatigue. Use the chart below to determine proper fit. Custom belts are available at an additional charge. Linemen Equipment Climbing Linemen 5 Tool Belts & Accessories Pole Straps 7 Pole Climbers 8 & Climbing Accessories Tool Belt 12 Holsters & Accessories Climbing 12 Belt Accessories Bolt & Nut 13 Bags Linemen 14 Tool Bags Personal / 15 Protective Hip-Grip Sizing Chart Upper Tongue Adjustments D18 33-39” D23 or 24 39-45” D29 or 30 45-51” D19 or 20 35-41” D25 or 26 41-47” D21 or 22 37-43” D27 or 28 43-49” Sam Brown Suspenders These all-leather suspenders ease the weight of the tools and line belt. One size fits most. (This is not a safety belt) Detachable Rest-A-Back This belt is designed to provide support, yet easily attach to tool belts. The 5-1/2” wide back is made of leather. The belt is available in all-leather or neoprene-coated nylon. (This is not a safety belt) 88 88G 160NL 80 83 Belts that exceed D30 in size chart are available but must be special ordered. Please call Techline Tools for a quote. See sizing chart page 23.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
83 Detachable Rest-A-Back 2.25 lbs
83N Nylon Detachable Rest-A-Back 2.25 lbs
Number Description Ship Wt
80 Sam Brown Suspenders 1.25 lbs
Number Description Ship Wt
Number Description Ship Wt
Number Description Ship Wt
88 The Floridian 6.50 lbs
Number Description Ship Wt
88G Hip-Grip 8.25 lbs
160NL The Journeyman 6.0 lbs
The JourneymanThis all-leather belt has a glove-soft cushion,yet is extremely durable. It features full shiftingD-rings and is an ideal belt for the line worker who isseeking a good value in a belt.
The FloridianThis all-leather tool belt features a 5-1/2” paddedsection for back support and climbing comfort withshifting D-rings.
BASHLIN Linemen Tool Belts & Accessories
5
Hip-Grip Back SupportThis all-leather tool belt helps relieve strain andfatigue. Use the chart below to determine proper fit.Custom belts are available at an additional charge.
LinemenEquipmentClimbing
Linemen 5Tool Belts &Accessories
Pole Straps 7
Pole Climbers 8& ClimbingAccessories
Tool Belt 12Holsters &Accessories
Climbing 12BeltAccessories
Bolt & Nut 13Bags
Linemen 14Tool Bags
Personal / 15Protective
Hip-Grip Sizing Chart
Upper Tongue Adjustments
D18 33-39” D23 or 24 39-45” D29 or 30 45-51”
D19 or 20 35-41” D25 or 26 41-47”
D21 or 22 37-43” D27 or 28 43-49”
Sam Brown SuspendersThese all-leather suspenders ease the weight ofthe tools and line belt. One size fits most.
(This is not a safety belt)
Detachable Rest-A-BackThis belt is designed to provide support, yet easilyattach to tool belts. The 5-1/2” wide back is made of leather.The belt is available in all-leather or neoprene-coated nylon.
(This is not a safety belt)
88
88G
160NL
80
83
Belts that exceed D30 in size chart are available but must be special ordered. Please call Techline Tools for a quote. See sizing chart page 23.
800-747-37476
Number Description Ship Wt
Number Description Ship Wt
Number Description Ship Wt
Number Description Ship Wt
2000M Body BeltHandcrafted of high quality pliable leather for a comfortablefit on the first wearing, this belt is a full float design featuring a5-1/2” cushioned back and sliding D-rings.
20003M Body BeltJust like the 2000M, but with an attached backsaver, thisbelt provides all of same features, and strain-relieving back support.
1988M Body BeltThis full float belt with a 5-1/2” cushioned back is made ofthe same 6-ply nylon “nybuck” material used on pole straps.The floating action allows lateral movement on the pole, reducingstrap wear.
Belt SupportersUsed by those who carry an unusually heavy load of tools, beltsupporters help to distribute the weight to either a waist strap orshoulder harness. These are not safety harnesses and arenot intended to support the weight of the wearer.
Nybuck Pole StrapsStrong and flexible, made of woven nylonfilament cloth, folded and impregnated with neoprene,then pressed together to ensure permanent bonding.Center layers are of contrasting colors to indicate wear.
Leather Reinforced w/ NylonMade of nylon webbing between layers of leather,this strap is strong, durable and flexible. Nylon webbingalso provides a visual indication of wear.
50 SeriesThis 6-ply, neoprene-coated nylon strap is 1-3/4”wide, and features tongue/buckle adjustment and a redwear indicator in the center to let you know when toremove it from service.
BASHLIN Pole Straps
Buckingham pole straps may be used by a person weighing up to 350 lbs. when fully outfitted with tools and equipment.
7
78 SeriesPliable leather straps feature a nylon insert.The stitching is deeply embedded in the leather forlonger wear.
LinemenEquipmentClimbing
Linemen 5Tool Belts &Accessories
Pole Straps 7
Pole Climbers 8& ClimbingAccessories
Tool Belt 12Holsters &Accessories
Climbing 12BeltAccessories
Bolt & Nut 13Bags
Linemen 14Tool Bags
Personal / 15Protective
BUCKINGHAM Pole Straps
800-747-37478
BD14-1N
85N
87N
89N
105BC
140DS
130D
150TS
Number Description Ship Wt
Number Description Ship Wt
Number Description Ship Wt
BD14 SeriesThis aluminum offset climber features a replaceable, forged steel gaff.The aluminum alloy construction weighs 30% less than comparable steelclimbers, reducing fatigue and adding climbing comfort. Bashlin poleclimbers include #2 gaff guard and #5 gaff gauge, standard.
Climber StrapsThese nylon climber straps are durable, pliable and comfortable, featuringdouble rivets and a protective buckle shield.
Climber Pads
BD14-1N Bottom straps attached 4.25 lbs
BD14-2N Bottom straps attached, 4.75 lbs and top straps
BD14-4N Bottom straps attached, 5.50 lbs top straps and #130D pads
BD14-5N Bottom straps attached, 5.75 lbs top straps and #140DS pads
85-N Top straps - 1-1/16” x 24” 10 oz
87-N Two piece lower straps - 1-1/16” x 28” 11 oz (original style, to be used on the triangular ring of Bashlin climbers. Assembly required)
89-N Two piece lower straps with split rings 11 oz - 1-1/16” x 28”
130D This is an L-shaped design with light padding 0.70 lbs for added comfort.
140DS The winged pad holds the shank securely. 1.25 lbs The climber shank fits inside the pad, reducing movement and adding comfort.
150TS This T-shaped pad protects the shin and 0.90 lbs the calf. The leather lugs are securely riveted for long wear.
105BC Designed for the occasional climber, this pad 1.50 lbs reduces kick-back and twisting of the shank. The 105BC features an angled metal section.
BASHLIN
Pole Climbers & Climbing Accessories
Number Description Ship Wt
Number Description Ship Wt
Number Description Ship Wt
Replacement Parts BD12
BD14 BD16BFor Bashlin Climbers Series Series Ship Wt
Gaffs 1-5/8” #14 #14 0.50 lbs
Bashlin #14 Gaff Kits come with two gaffs and the # 4G gaff screws.
Gaff Screws # 4G # 4G 0.05 lbs
Order Bashlin # 4G for gaff screws only.
Only Bashlin replacement gaffs may be used on Bashlin Climbers.Contact Techline Tools for availability of any replacementparts not shown.
4G
14
5
2
27
Gaff GuardsProtect the tips of your gaffs and yourself withBashlin’s # 2 gaff guard with hook/loop attachment.
5 Gaff gauge 0.20 lbs
27 Gaff Shaping Kit (complete) 0.55 lbs
2 Gaff guard 0.20 lbs
Gaff GaugeThis gaff gauge measures the correct length, width,thickness and shape of the gaff. This gauge is for use onBashlin #14 Pole Gaffs only.
Gaff Shaping KitThis gaff shaping kit includes all of the necessary tools tomaintain gaffs. The components include a sharpeningstone, 6” mill file, wood file handle and gaff gauge in acompact case. This gauge will work only with Bashlingaffs. Individual components are available. Please contactTechline Tools for availability.
BASHLIN Pole Climbers & Climbing Accessories
9
LinemenEquipmentClimbing
Linemen 5Tool Belts &Accessories
Pole Straps 7
Pole Climbers 8& ClimbingAccessories
Tool Belt 12Holsters &Accessories
Climbing 12BeltAccessories
Bolt & Nut 13Bags
Linemen 14Tool Bags
Personal /
15Protective
800-747-3747
35033 Climber footplate 4.0 lbs
3500 4” cushion wrap pad 1.0 lbs
3503 3” cushion wrap pad 1.0 lbs
3502 4” cushion wrap pad (w/ metal inserts) 1.0 lbs
T9206 A 1-3/4” Pole Gaff (use w/ Bucklite titanium climbers) 1.0 lbs Available in 12o or 16o angle
Gaff ProtectorsPlastic-coated spring type clip-ons protect gaffs from damage.
6909 For permanent gaff pole climbers only 1.0 lbs
6909U Universal gaff guard 1.0 lbs
Pole ClimbersClimber leg irons are draw-forged from selected high strength grades ofsteel. Buckingham also offers a new Bucklite titanium climber, whichprovides the strength of steel at a weight 11% lighter than aluminum.Product testing occurs before, during and after production. Finishedproducts are tested beyond their expected usage.
92089 Straight steel shank with nylon strap 5.0 lbs with replaceable pole gaffs
91089 Offset steel shank with nylon strap 5.0 lbs with replaceable CCA gaffs
T94089A Offset titanium shank with nylon strap. 3.2 lbs Easy gaff change out with allen wrench
91089
9206
6909
Cushion Wrap PadsThese pads are designed to keep the climber stationary while providingunmatched comfort and ease of wearing. Velcro® straps allow infiniteadjustment, and easy on/off.
Climber FootplateThese footplates attach to the climber stirrups to help eliminate thediscomfort in the feet, ankles and knees caused by standing on a pole forextended periods of time. They feature rugged steel construction andnon-slip rubber soles.
Number Description Ship Wt
Number Description Ship Wt
3500 3503
35033
Buckingham pole climbers may be used by a person weighing up to 350 lbs. when fully outfitted with tools and equipment.
6909U
T9206A
BUCKINGHAM Pole Climbers & Climbing Accessories (cont.)
Number Description Ship Wt
2635
KG-21972G One pair of snap-on gaff guards 2.0 oz
Two-Part Climber StrapThese two-part foot straps are available in nylon and leather.They are assembled on a split ring and are 26” in length.Sold in pairs only.
21391 1” folded nylon 1.0 lbs
21341 1” harness leather 1.0 lbs
Snap-On Gaff GuardThese plastic-coated, coil-spring gaff guards snap ontopole climbers for quick, convenient protection. Features anextra-sturdy spring-wire clip.
Number Description Ship Wt
KG-2 Gaff sharpening kit 10.0 oz
Gaff Sharpening KitThis kit features a complete set of gaff sharpening toolsand instructions for use in a convenient roll-up blackcanvas case with tie. Kit features an 8” fine tooth file, 3”honing stone and a Klein KG-1 gaff gauge.
KLEIN Pole Climbers & Climbing Accessories (cont.)
BUCKINGHAM Pole Climbers & Climbing Accessories (cont.)
800-747-3747
Number Description Ship Wt
5130 12” all-leather tape thong 0.30 lbs
2960
Number Description Ship Wt
2960 Hand line carrier 1.0 oz
Number Description Ship Wt
12
111HS
42266
111HLS111HLDS
42261
Linemen’s HolstersThese premium quality holsters feature double backs which arereinforced for extra wear.
111HS For pliers, rule, screwdriver, knife or wrench 1.0 lbs
111HLS For pliers, rule, screwdriver, Channellock, 1.0 lbs knife or wrench
111HLDS For pliers, rule, screwdriver, Channellock, 1.0 lbs ratchet driver, knife or wrench
BASHLIN Tool Belt Holsters & Accessories
Number Description Ship Wt
BUCKINGHAM Tool Belt Holsters & Accessories
Hand Line Carrier
Leather HolstersMade of high grade leather, these holsters in both the four and five-pocketmodels feature 3” belt tunnels, snaps and covered backs.
42261 four-pocket leather tool belt holster 0.60 lbs
42266 five-pocket leather tool belt holster 0.70 lbs
5130Tape ThongThis tape thong with fiber bar fits all standard electrical tape rolls, andis slotted for easy attachment to belt.
KLEIN Climbing Belt Accessories
ESTEX
Climbing Belt Accessories
13
25A
25PS
1061
1120
25A Bolt & Nut BagMade of #8 cotton duck, with reinforced bottom. Belt attachment is bytwo straps joined by snaps and “D”s.
25PS Bolt & Nut BagOffers a wide opening bag with leather bottom and snap attachment.
25PS 8 ” 8” 2-1/2” 0.60 lbs
25A 8-1/2” 9” 4” 0 .70 lbs
Number Length Height Width
Number Length Height Width
1061 Bolt & Nut PouchThis heavy duty canvas pouch features top quality hardware, realleather reinforcements and easy belt attachment.
1120 Bolt & Nut PouchThis pouch features a rounded bottom to force parts to the center of thebag, and the addition of a quick release snap.
ESTEX Bolt & Nut Bags
BASHLIN Bolt & Nut Bags
LinemenEquipmentClimbing
Linemen 5Tool Belts &Accessories
Pole Straps 7
Pole Climbers 8& ClimbingAccessories
Tool Belt 12Holsters &Accessories
Climbing 12BeltAccessories
Bolt & Nut 13Bags
Linemen 14Tool Bags
Personal / 15Protective
Number Length Height Width Ship Wt
Number Length Height Width Ship Wt
1120 6-1/2 ” 8-1/2” 3”
1061 8-1/2”
10”
2”
800-747-374714
2190 2190-1LOSP
2160
2114-24
2171
Canvas Tool BagsAll Estex canvas tool bags are constructed of heavy canvas, 1/4” double-tempered masonite bottoms, heavy duty polypropylene web handlessewn completely around, heavy steel top frames, featuring leather-reinforced top grain leather straps, double-riveted with rivet caps,industrial weight nickel-plated snaps on the pockets, and heavy vinyl-coated nylon bottom reinforcements & weather seals.
Number Length Height Width
2114-14 14” 10” 7-1/2”
2114-24 24” 14” 10”
2160 22” 14” 10”
2171 22” 14” 10”
ESTEX Linemen Tool Bags
Vinyl Tool BagsAll Estex vinyl tool bags are constructed of heavy vinyl-coated nylon,1/4” double-tempered masonite bottoms, heavy-duty polypropyleneweb handles sewn completely around, heavy steel top frames, featuringleather-reinforced top grain leather straps, double-riveted with rivetcaps, industrial weight nickel-plated snaps on the pockets, and heavyvinyl-coated nylon bottom reinforcements & weather seals.
Number Length Height Width
2190 24” 19” 10”
2190-1LOSP 24” 19”
10”
Number Description
3N14114TANYEL72
15
9710
ST8716
BSP1000
RW9716
Number Description
BO100-W Bee Oil, 4 oz
Number Description
MO-102 Mink Oil
Number Description
BSP1000 Bee Seal Plus
Number Color / Description Height Sizes
9716 Blk / lace to toe 16” 6 - 13
RW9716 Redwood / lace to toe 16” 7 - 13
9710 Blk / lace to toe 10” 6 - 13
RWST8716 Redwood / steel toe 16” 7 - 13
ST8716 Blk / steel toe 16” 7 - 12
WESCO Work Boots & Accessories
MO-102BO100-W
3N14114TANYEL72 Nylon - 72” lace f/ 10” boot
3N14114TANYEL108 Nylon - 108” lace f/ 16” boot
Leather and Nylon Boot LacesWhen ordering laces, be sure to specify the boot size.
Bee Seal PlusCondition your boots to handle the elements with BeeSeal Plus boot dressing, specially formulated for superiorwaterproofing and protection.
Highliner SeriesThis rugged series of Linemen’s boots features leatherside patches, heavy steel shanks, leather half-slips, oilresistant double-stitched soles and heels, recessed metalheel breast plates, and steel side plates.
Mink OilIf you’re planning to store your boots for a period of time,you’ll want to first treat them with Wesco Mink Oil toensure a long life for your boots.
Bee OilBee Oil should be used as a primer and followed byBee Seal Plus.
800-747-3747
Chest Size 36-38 40-42 44-46 48-50 52-54 56-58
Waist Size 32-34 36-38 40-42 44-46 48-50 52-54
Sizes S M L XL 2XL 3XL
16
Chest Size 36-38 40-42 44-46 48-50 52-54 56-58
Waist Size 32-34 36-38 40-42 44-46 48-50 52-54
2500-1
ArcLite™ HiVis™ 1500 Series
The ArcLite™ HiVis™ is a unique value-added raingear system designedfor workers potentially exposed to momentary electric arcs and daytime/nighttime work zone visibility hazards. The ArcLite™ HiVis™ providesunique 4-way protection:
• Arc Resistance • High Visibility 7.6 cal/cm2 Arc Thermal Class 3 Level 2 ANSI/ISEA Performance Value 107-1999 style -ASTM F1891-99
WorkLite™ 80 SeriesThe WorkLite™ 80 Series suit is a flame retardant, lightweight yethighly durable raingear system, featuring 200-Denier NylonDupont® Type 66 (DWR), special polyurethane coating for tearresistance, two needle construction and a unique sealing system toensure protection from the elements.
NASCO Rainsuits
Rainsuit Storage BagsThese water-resistant bags protect your raingear against rips,punctures and tears, and are available in two varieties: model 2500-1 secures with snaps and is especially suitable for NASCO’s ArcLitePro Series rainsuit, while model 2511 secures with drawstrings andis especially suitable for NASCO’s WorkLite 80 Series rainsuit, bothavailable in this section of your Techline Tools catalog.
2500-1 10 ” 14 ” 6 ”
2511 16 ” 25-1/2 ”
Number Length Height Width
ESTEX Rainsuit Storage
Long & Tall options available, please contact us.
Custom logos available on request .
466
20
657
467
Number Description
Number Description
Number Description
Number Description
Number Description
Number Description
Number Description
Suede Gauntlet CuffAvailable in large size, this glove offers superior protectionof a rubberized gauntlet cuff with the flexibility of suede.
Leather Gauntlet CuffAvailable in small, medium, large and extra-large, this glovefeatures a rubberized gauntlet cuff for superior protection.
Suede Safety CuffAvailable in medium and large sizes, this suede glovefeatures a rubberized safety cuff for added protection.
Leather Driver StyleThis glove features a tape and ball adjustable wrist strap,and is available in small, medium, large and extra large.
PigskinFeaturing a keystone thumb, this pigskin glove is availablein small, medium, large and extra-large.
Cotton Knit LinerConstructed of 100% cotton, this liner offers warmthand superior durability.
Brown JerseyThis heavy weight glove provides warmth and comfort,and is available in large and small sizes.
1057Leather Glove ProtectorsProtectors are constructed of top grain cowhide leather, reinforced strip inthumb crotch, non-metallic strap with fluorescent cuff. Available in lengthsof 12”, 14”, 15” and 16”. Styles are available in straight, contour and bell cuffs.
1050
When ordering protectors, state hand size, i.e. 9, 9-1/2, 10, 10-1/2, 11.
Cream Cowhide
Buckskin
Thermax Liner
Red Buffed Buckskin
KUNZ Work Gloves
(cont.)
KUNZ Rubber Gloves & Leather Protectors
19
999Low-VoltageGloveProtectorsSame quality features as the 1057 and 1050 Protectors,except with elastic back and 10” length.
Insulating GlovesMade from high quality natural gum rubber,these gloves are contoured to offer superiorcomfort and protection.
WHITE SAFETY LINE Rubber Gloves & Sleeves
16
GLOVELENGTH
11” Low-Voltage16” High-Voltage18” High-Voltage
20
PROOF TEST VOLTAGE
0 Class 0 (5 kV)
20 Class 2 (20 kV)30 Class 3 (30 kV)
YB
COLOR
BC
CUFFOPTION
Y/B Yellow Inside/Black Outside
R/B Red Inside/Black Outside
B Solid Black
HOW TO ORDERExample: If you want a 16” glove for a Class 2 (20 kV) application,yellow inside and black outside, and want the Bell Cuff option,the correct part number would be:
CC Contoured Cuff
BC Bell Cuff
SIZE
When ordering protectors, state hand size, i.e. 9, 9-1/2, 10, 10-1/2, 11.
Rubber Insulating SleevesDesigned to provide maximum coverage and protection for arms andshoulders. Made of the highest quality natural gum rubber, these sleevesare available in straight and curved arm styles in regular, large and extra-large sizes
WHITE SAFETY LINE Rubber Gloves & Sleeves (cont.)
SL CA
STYLE
SS Straight ArmCA Curved Arm
L
SIZE
R Regular 26” Long
L Large 28” Long
XL Extra-Large 30” Long
20
PROOF TEST VOLTAGE
20 Class 2 (20kV)
30 Class 3 (30kV)
40 Class 4 (40kV)
RB
COLOR
B Solid Black
R Solid Red
Y Solid YellowY/B Yellow Inside/Black Outside
R/B Red Inside/Black Outside
R/Y Red Inside/Yellow Outside
HOW TO ORDERExample: If you want a curved arm sleeve in size Large, Class 2 (20 kV) application,red inside and black outside, the correct part number would be:
TalcCooling powder absorbs moisture and perspiration. Minimizes friction andacts as lubrication to prevent sticking. Does not harm skin or reducedielectric value of gloves and sleeves.
TC-1 Gallon
TC-12 (12) 8 oz bottles
Number Description
TC-1
TC-12
Sleeve AccessoriesProtective sleeves are held in place by a one-piece reinforced sleeveharness, or molded sleeve straps. Both feature sturdy construction withreinforced holes to allow ample comfort adjustment and will not rip atstress points.
Fasteners are non-metallic screw-type and will not tear loose accidentally.Large hex heads allow adjustment even while wearing gloves. Flangedscrew design will not tear sleeve or harness, or catch on clothing.
SH-1 Reinforced sleeve harness
SS-2 Reinforced sleeve straps
SF-4 Positive grip screw-type fasteners
Number Description
SH-1
SF-4
SS-2
Number Description Dimensions
2310
21
High-Voltage Glove BagsThese heavy duty canvas glove bags feature the samedouble-stitched seams, nickel-plated snaps, ventilationeyelets and a three-piece leather snap holder on back,with the additional room needed for high-voltage gloves.Heavy natural canvas bags are available in 15”, 18”, 20”heights, extra-heavy natural canvas bags in 20” only.(ask for model 2436)
2220
2449-TU-C
2310 7” x 9 ” 28 ” 2 ”
2449-TU-C 12” x 8 ” 29 ” 4 ”
Number Length Height Width
Number Length Height Width
2220 8 ” 15 ” 4 ”
2223 8 ” 18 ” 4 ”
2226 8 ” 20 ” 4 ”
2436 8 ” 20 ” 4 ”
Number Length Height Width
Sleeve BagsThis traditional, natural canvas sleeve bag’s 9” top lengthallows for easy storage, and features both a quick releasesnap on back and a snap and D-ring on front.
Sleeve & Glove BagsThis handy combination bag is really an extra-largesleeve bag (see measurements below) with a glovepocket measuring 8” long, 4” wide and 17” high securelyattached to its side, both with snap closures.
ESTEX Accessories For Gloves & Sleeves
2210
2210 Natural canvas w/ snap 8”L, 2”W, 12”H
2212 Yellow vinyl w/ snap 8”L, 2”W, 12”H
Low-Voltage Glove BagsConstructed of heavy-duty canvas, these bags featuredouble-stitched seams, nickel-plated snaps, ventilationeyelets and a three-piece leather snap holder on back.
2000 Series LanyardThis lanyard is of standard 6’ length, and comes with shockabsorbing device and double action locking snaps.
Number Description Ship Wt
2004NWB-6 6” nylon web lanyard 2.50 lbs
683X Style HarnessThis harness was designed for the utility industry.It has steel connectors and field proven 10,000 lb. test nylon webbing.
Number Description Ship Wt
683XAF Nylon Loop 3.50 lbs
3852
6393700
Aerial Basket BeltPersonal fall protection for bucket truck. FloatingD-ring, ANSI Class I. Not for fall arrest, but for fall restraint.Available in sizes, small, medium, large & extra-large.
Full Body HarnessBuckingham offers a full array of full body harnessesto be used in fall arrest, work positioning, retrieval and repellingapplications, and will design and manufacture a harness to accommodateyour needs. Call for additional fall protection equipment.
The most critical measurement of a body belt, in terms of comfort, is dee measurement. The proper dee size is normally found bymeasuring from the prominent part of one hip bone, around the back to the same point on the other hip bone. To this figure, oneinch should be added (two inches for padded belts) so the dee ring heels will be just forward of the hip bones, rather than onthem. All measuring should be done over clothing to be worn under the belt. Normal combinations of dee and belt measurementsare shown below.
DEE MEASUREMENT
3”
1.5”
BELT STRAP SIZE BELT STRAP RANGEMIN. MAX.
APPROX. 4”X
Y
X - distance from waist or top of hip bone to where body belt is worn.
Y - Measurement is from front of hip bone around the back to the front of the other hip bone.
Measure - ( “Y” distance ) is hip to hip and add 1 inch to non-padded and 2”to padded belts. This measurement is the Dee size.
Rule of Thumb - Measure from seam of pant, around buttocks to otherseam and add 2”.
96305N
ULTRASAFE Fall Protection
Full Body HarnessFull body nylon web harness featuresD-rings at the center of the back, and are availablein sizes small, large and extra-large.
3000, 3000R Cap StyleThis cap offers a wider profile for added protection against sunexposure, accessory slots that accept a wide variety of attachments, andis available in both standard suspension and ratchet adjustment for acustom fit.
3000 Standard suspension
3000R Ratchet suspension
303, 303R Hat StyleThis cap features a full brim for superior protection against sunexposure, glare, splash and rain, and is also available in both standardsuspension and ratchet adjustment.
303 Standard suspension
303R Ratchet suspension
V-Gard® Protective HelmetsThese protective helmets come in both cap and hat style, and consistof a polyethylene shell and suspension that work together as aprotective system.
Winter LinersMade of flame-retardant, pre-shrunk cotton twill, theseliners are thermal-lined and have elastic web chin straps.Available in small, medium and large.
Sun Shields“See Through” front for overhead visibility. Extends hatbrim up to 360 degrees, depending on model, to protectface, neck and ears from sun exposure.
697290 Cap, MSA
697410 Hat, MSA
SS5 Cap, BULLARD
SS4 Hat, BULLARD
SS28 Universal
Hard Hats & Accessories
Hard Hats & Accessories
CSS
SS4
Neck Shade100% cotton sun shade for all helmets, hard hats and caps.Protects neck from sun exposure and UV radiation. Attacheswith 3 Velcro® strips that are provided.
PocketlightThis pocketlight features a ribbed crush-resistant case, an unbreakablelens, a three-way switch and a smooth reflector.
Number Description
2702 2 AA-cell pocketlight
Number Description
2618 2 D-cell flashlight
Number Description Ship Wt
45109 Litebox® , standard yellow 7.4 lbs
45110 Litebox® , standard orange 7.4 lbs
LiteBox®
Constructed of high-impact ABS thermoplastic, with a rubberizedimpact bumper lens ring and cushioned grip handle, this light featuresa high intensity 20 watt spot providing up to 70,000 candlepower for upto 3.5 hours. Includes 120 Volt AC, 12 Volt DC chargers, shoulder strapand mounting rack.
Industrial FlashlightThis heavy duty flashlight features a ribbed case molded from aspecially blended industrial polypropylene, an unbreakable lens, aswitch guard and a spare bulb compartment.
STREAMLIGHT
Lights
29
2270C
Number Description
Number Description Ship Wt
PELICAN Lights
Versabrite™ II Big BeamThis light features an 8,000 candlepower Xenon widebeam LXM lamp module, a multiple position swivel head,and includes large multiple use visor/clothing clip andtwo night vision discs (red or blue/green) and has a burntime of 5 to 6 hours. Available in non-glare black.
HD ELECTRIC Lights
Hard Hat LightZinc-powered hard hat safety light. Includes one pair ofself-adhesive mounting strips 2” x 2-3/4” long.
664640 Rite-Lite® 0.5 lbs
664640
7901
Number Description Size
GOLIGHT Lights
Truck LightThis light is constructed of the highest quality UVmaterials. It withstands nearly all types of weatherconditions and is capable of a combined 370 degreerotation with a 120 degree tilt. It features a remotecontrol that is programmable for each unit and will workfrom 150’ away. It will cut through severe weatherconditions with its 400,000 actual candle power light.Comes with remote, suction cup and magnetic shoe,15’cord with cigarette plug for 12VDC and a nylon carry case.
Bucket HooksBucket hooks are available in Polymer and PVC. Polymer hooks are moldedfor high breaking strength and resistance to weather; PVC hooks areformed from PVC rod.
Number Description
1830 Polymer hook fits all standard buckets
1831 Polymer hook fits buckets w/ 3” lip
1840 PVC hook fits all standard buckets
Bucket PadsBucket pads help to reduce back and leg strain, prevent slipping, protectliner from wear and tear, plus provide thermal insulation in cold weather.Pad is 1/4” textured rubber top layer bonded to 3/4” closed cell foambottom layer, and is completely waterproof.
Number Description
2708 Bucket pad
Bucket CoversConstructed of heavy vinyl-coated nylon, the covers come equipped witha lanyard and snap to keep the cover with the truck, along with heavybungee cord in the hem. *Model 2715 features a foam insert to helprepel rain and prevent wind whip.
Provide outside lip measurements.
Number Description
2711 Bucket cover / one-man buckets
2712 Bucket cover / two-man buckets
*2715 Custom-made bucket cover
Number Description Length Height
Compression Tool & Bolt Cutter BagsBags are reinforced with leatherette. Brass grommets in base of bag andside pocket are for drainage and ventilation. Model 2651 has one pocketfor compression tool and one pocket for cutters, with two grommets forhanging inside bucket. Model 2651-2 has two pockets for compressiontools and one pocket for cutters, plus two grommets for hanginginside bucket.
BA
B
A
800-747-3747
Number Description
1800 6 tool pockets on 1 side
1810 5 tool pockets on 1 side w/ 2 lg. pouches on the other
1818 9 tool pockets on 1 side w/ 1 lg. pouch on the other
1820 8 tool pockets on 1 side w/ 7 tool pockets on the other
1820-HB Same as 1820 but w/ polyethylene liner
32
Line Hose BagsThese bags can be used to send line hose and materialsup and down the pole or as a Hot Stick caddy for multiplesticks. They come in either canvas or vinyl with 8” or 12”diameter, depending on your need.
Oval Buckets (Aerial Baskets)These bags are built to last and provide the user with avariety of pocket configurations.
ESTEX Bucket Accessories (cont.)
Number
Canvas Vinyl Description
1900 1901 8” diameter x 30” high
1910 1911 8” diameter x 30” high w/ snap
1920 1921 8” diameter x 48” high
1930 1931 8” diameter x 48” high w/ snap
1932 - 8” diameter x 60” high
1940 1941 12” diameter x 48” high
1950 1951 12” diameter x 48” high w/ snap
1950-60 - 12” diameter x 60” high w/ snap
1950-60
1820 1820-HB
Pocket Configurations
6 tool pockets on one side
#1800
#1800-HB w/ Hard Body
7 tool pockets on one side
#1810
#1810-HB w/ Hard Body
9 tool pockets on one side
#1818
15 tool pockets on one side
#1820
#1820-HB w/ Hard Body
#1820-H-HB w/ Handleand Hard Body
1825
1829-DP
33
Tool CarriersBashlin tool boards are made of ABS. They do not fray orflake, and still work well in cold weather conditions. Thisboard will hold a hammer, hand tools, bolts and nuts.
Tool ApronsEstex tool aprons are constructed with heavyweightcanvas or vinyl-coated nylon to ensure years of service,they are rivet-reinforced, PVC-framed, with grommetsfor easy hanging on the bucket
Number Length Height Width
1825 18 ” 10 ” 4 ”
1828 18 ” 10-1/2 ” 4 ”
1829-DP 23-7/8 ” 21-1/4 ” 4 ”
1826 18 ” 19-1/2 ” 4 ”
URD & Splicer BagThis bag comes with 14 pockets on the outside and 15pockets on the inside. It also comes with carryinghandles for working away from the truck.
ESTEX Bucket Accessories (cont.)
1815-14-HB
BASHLIN Bucket Accessories
(cont.)
800-747-3747
Number Length Width Depth Ship Wt
05-929-1 20 ” 8 ” 6 ” 8.0 lbs
Number Length Width Depth Ship Wt
05-919-1 17 ” 6-1/2 ” 24 ” 17.0 lbs
05-960
Fiberglass StepsThe accessory step makes it easier to get into and out ofthe bucket. Constructed of high strength fiberglassmaterial and anti-skid step surfaces, the step is availableboth with a liner (#05-961), and without (#05-960).
Number Length Width Depth Ship Wt
05-961 26 ” 8-1/2 ” 8 ” 8.0 lbs
05-960 26 ” 8-1/2 ” 8 ” 8.0 lbs
Extra Deep Tool TrayThis tray mounts on the outside of the bucket, and will fitbuckets either with or without liners.
Fiberglass Tool TrayThis tray has five compartments with removeablepartitions. Fits buckets either with or without liners.
05-919-1
05-929-1
34
05-832 Impact wrench & drill holster
05-831 Multi-purpose impact wrench/ drill holster
Number Description
05-832
05-831
Hard Plastic HolstersThese holsters are available in two models, and attach tobuckets with and without liners, both inside or outside,and feature adjustable top brackets for left and right-handed use.
Tool BucketsThese canvas bags are made from highest qualitymaterials, with either rubber, high impact polymer orleather bottoms, and molded PVC top rings to keepthem from collapsing. Available in various sizes.Call for additional sizes.
2070 2022
ESTEX Tool Buckets & Bags
Harness BagThis bag is constructed of heavy duty canvas with ahard bottom and a zipper closure, and can be used tocarry items other than a harness.
2608-C
Number Description Ship Wt
431-3 3 gal. cooler 5.0 lbs
451-5 5 gal. cooler 7.0 lbs
4101-10 10 gal. cooler 10.0 lbs
9759 Heavy gauge wire rack for 10 gal. 5.0 lbs
6335 Heavy gauge wire rack for 3 & 5 gal. 5.0 lbs
9547 Replacement lid for 10 gal. 3.0 lbs
9546 Replacement lid for 3 & 5 gal. 3.0 lbs
SPIGOT Spigot for all sizes 8.0 oz
IGLOO CoolersThese coolers, available in red and yellow high visibilitysafety colors, with reinforced handles and a cupdispenser bracket, are insulated for maximum coldretention and built to prevent fading and cracking in allexposures. Their white FDA Grade inner liner is easy toclean and resists stains and odors. A wide mouthpressure fit lid makes for easy filling, and a keeper cordprevents lid loss.
IGLOO Coolers & Accessories
431-3
4101-10
9759
451-5
800-747-3747
Heavy-Duty Keystone-Tip Screwdriver
Tip width/Square Shank Round Shank Shank Length Overall Length
600-4 602-4 1/4” x 4” 8-11/32”
600-6 602-6
5/16” x 6”
10-15/16”
600-8 602-8
3/8” x 8”
13-7/16”
600-12 602-12
1/2” x 12”
17-9/16”
Round-Shank Heavy DutyScrewdriver w/ Keystone Tip
Round Shank Tip width/ Shank Length Overall Length
602-4 1/4” x 4” 8 -11/32”
602-6 5/16” x 6” 10 -15/16”
602-8 3/8” x 8” 13 -7/16”
602-12 1/2” x 12” 17 -7/16”
Round-Shank Special ProfilatedPhillips-Tip Screwdriver
Number Point Size Shank Length Overall Length
603-3 1 3” 6-3/4”
603-4 2 4” 8-5/16”
603-6
3
6”
11”
600-6 602-6603-6
7-Piece Cushion-GripNut Driver SetThis set consists of 7 nut drivers ranging in size from 3/16" to 1/2".The nut drivers are made of heat-treated and tempered steel.
The cushion-grip handle resists slipping and allows you to apply greatertorque. The grip is resistant to oil, gas and water, with a color-coded capfor easy identification of hex-nut sizes. Set includes a roll-up plasticpouch with hang holes.
Set #631 Contains:
Number Color Code Hex Size Shank Length
630-3/16 Black 3/16” 3”
630-1/4
Red
1/4”
3”
630-5/16 Yellow 5/16” 3”
630-11/32
Green
11/32”
3”
630-3/8
Blue
3/8”
3”
630-7/16
Brown
7/16”
3”
630-1/2 Red 1/2” 3”
631
Can be ordered individually. Available in 6” shank lengths.
KLEIN Screwdrivers
Warning: Always wear eye protectionWarning: NOT INSULATED. Will NOT protect against electrical shockWarning: Do NOT use a pry or chisel
46
Folding Hex-Key SetsThese sets fit in your pocket or tool box easily and helpprevent the lost key problem. The holder serves as a handlethat allows the wrench to be used either straight out or ata right angle.
Warning: Always wear eye protectionWarning: NOT INSULATED. Will NOT protect against electrical shockWarning: Do NOT use a pry or chisel
D506-10
506-10Adjustable WrenchesStandard jaw, made from drop-forge alloy steel formaximum strength and lightweight. Chrome plated alsoavailable with dipped handles. For dipped handle just adda "D" in front of the number.
Number Length Capacity
506-6 6” 3/4“
506-8 8” 15/16”
506-10 10” 1-1/8”
506-12 12” 1-5/16”
Extra-Capacity Design
Same qualities as standard jaws but open an extra 3/16”.This allows you to use the same size wrench for biggerjobs. Ideal for confined spaces.
507-6 6” 15/16”
507-8 8” 1-1/8”
507-10 10” 1-5/16”
507-12 12” 1-1/2”
KLEIN Wrenches
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
47
800-747-374748
Number Length Ship
7071 12” 2.0 lbs
3-in-1 Combination Socket Wrench
Number Length Ship Wt.
REL-151T 12” 2.25 lbs
Lineman’s WrenchThis tool provides a safe and easy way to tighten nuts on long boltswithout having to remove it from the nut. Features a bolt thru socket thatwill fit either a 5/8” or 3/4” square nut on one side, and a 1/2” nut on theother. It has a heavy duty design, and is reversible by flipping the lever.
Number Length Number Length Width Ship Wt.
GP-3458-12 12” 2.1” head, 1” handle 2.0 lbs, 7oz
Number Length Large End Small End
3146 13” 1-3/32” & 29/32” 13/16” & 5/8”
3146A 13” 1-1/16” & 1-5/16” 5/8” & 7/8”
Number Length Aluminum Copper
GP-3458-12
3146
FARGO Wrenches
RELIABLE Wrenches
REL-151T
KLEIN Wrenches
Lineman’s WrenchForged from special steel and heat treated. Each end has two different sizeopenings for multiple uses.
Bolt thru socket design allows the bolt to pass entirely through, so nuts can be tightened down to any threaded length. 12" handle with grip.
Goat WrenchDesigned to fit different sized nuts, bolts, or pipe, this wrench features aflat spot for a hammer and thread chasers in handle.
7071
BUCKINGHAM Wrenches
68200
68201
68202
68203
68204
KLEIN Wrenches
enches
Individual Ratcheting BoxWrenchesDesigned for use in confined spaces and have laminatedconstruction for greater strength. They ratchet by turningover with a different size at each end for added versatility.Comes in either single hex or double hex types. Available inmetric sizes on request.
Number Length Size
68200 4-1/4” 1/4” x 5/16”
68201 5-1/2” 3/8” x 7/16”
68202 6-1/2” 1/2” x 9/16”
68203 8” 5/8” x 11/16”
68204 8” 5/8”x 3/4 ”
68205 9-1/4” 11/16” x 3/4 ”
68206 9-1/4” 13/16” x 7/8”
7-Piece Ratcheting BoxWrench SetComes with all of the wrenches above and a heavy dutyplastic roll-up pouch with two grommet holes for hanging.
Ratchet/Flex HandleThese tools are drop-forged from the finest steel alloy and thoroughlytempered for great strength, lightweight and long wear.
Number Description Length
65720 3/8” Ratchet 7-1/2”
65820 1/2” Ratchet 10-1/2”
65822 1/2” Flex Handle 17”
65820
65822
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
49
Insulated Wrenches
Fig. 1Ratchet
Fig. 2Rev.
Ratchet Fig. 3 Allen Bar
Fig. 4Allen
Ratchet
Fig. 5Rev. AllenRatchet
Fig. 6PentaSocket
Fig. 9 Eye Loop
Fig. 890º Penta
RatchetFig. 790º Penta
Socket
Series GP Connector WrenchesDesigned specifically for lineman use, this tool is constructed for properand fast installation of mechanical connectors in utility distributionapplications. Both ends are separated by a handle made of sturdypolypropylene, providing protection from incidental end-to-end orenergized line contact.
“A” “B” L Catalog End C End C Approx. Weight Number Description Fig. Inches Description Fig. Inches Inches Lbs.
Torque: 400'-lb @ 8 gpm Pressure Port Thd: 3/4-16 SAE O-Ring Return Port Thd: 3/4-16 SAE O-Ring
Impact Wrench & DrillThis drill is well-balanced with a heat-insulated handle that is ergonomically positioned for comfort.It is designed for high torque drilling with a twin hammer impact mechanism for high performance.It is reversible and can be used on either an open or closed system.
Return Port Thd: 3/4-16 SAE O-Ring RPM Range: 1-1200 rpm Impacts Per Minute: 2200 @ 5 gpm
Impact Wrench & Drill with Variable TorqueThis tool is reversible with variable torque controls that can be adjusted from 80 to 280 ft -lbs so it can be used as an impact wrench to tighten, loosen or remove nuts and lag screws, or used as a drill. Will work on either an open or closed system.
Pressure Port Thd: 9/16-18 SAE O-Ring Return Port Thd: 3/4-16 SAE O-Ring RPM Range: 1-1200 rpm
Reversible DrillLightweight and compact, this drill has a rugged gear motor that is reversible. Will work on either open or closed-center hydraulic systems.
Number UPC Number Description
H6400C 42260 Drill - 1/2" key-type chuck
54923 54923 HTMA Male Coupler
54924 54924 HTMA Female Coupler
52
RELIABLE EQUIPMENT Hydraulic Tools
REL-425 Hydraulic WrenchThis tool is lightweight and will work on either a open or closed system. It is great for drilling, tightening, loosening or removing nuts and lag screws. It comes with a quick change chuck.
REL-425
SPECIFICATIONS
System: Open and Closed-Center Flow Range: 5-8 gpm Weight: 6.3 lbs
12 Ton Remote-Power Crimping HeadIts head design, light weight and improved durability makes it an excellent choice for hotsticks. A boss is included on each head for use with hotsticks. This tool requires an external hydraulic pump, capable of 10,000 psi.
Number Description Ship Wt.
RK1230 Use "U" style dies with a 1.2" opening 8.7 lbs
RK1230
RK1240 Use "U" style dies with a 1.65" opening 9.7 lbs
RK1240K Use Kearney PH2-style dies 9.7 lbs
Designed to crimp splices to 600 MCM and lugs to 750MCM. The REL-430 accepts standard "U" style dies as well as dies from Alcoa, Burndy, Blackburn, and Huskie. The 1-3/16" jaw opening allows use on larger cable diameters and connectors. The 180 degree swivel head permits use in confined areas. Also has a two-stage pumping piston for rapid advance, and twist handle release.
RK06FT 06197 Quad-Point Flip-Top Dieless Hand-Operated Hydraulic Crimping Tool w/ carrying case, test gauge and slugs.
Quad-Point Dieless Remote-Powered Crimping HeadHas a 6.2 ton capacity that operates from a 10,000 psi hydraulic pump that uses four indentorsto make a crimp. Also available in a 12 ton model (RK1230, RK1240)
HK1230 06426 12-Ton Hand Hydraulic Crimping Tool - 1.2" opening
HK1240 06427 12-Ton Hand Hydraulic Crimping Tool - 1.65" opening
12-Ton Hand Operated Hydraulic Crimping ToolNew head design results in lower weight. The two-speed pumpreduces crimping time along with a retractable ram when the crimp is complete. Includes a steel carrying case.
REL-TMP SeriesMakes setting poles , asphalt patching and compacting backfill faster and easier than a handtamp. It only has three moving parts for less problems and will work on either a open or closedsystem. Comes with a Kidney-shaped foot as standard equipment.
REL-TMP-72
Number Description Width Length Ship Wt.
REL-TMP-60 Pole Tamper w/o cutoff valve 4” 60” 27.0 lbs
REL-TMP-60V Pole Tamper with hose end valve 4” 60” 23.0 lbs
REL-TMP-72 Pole Tamper with valve on tube 4” 72” 23.0 lbs
FAIRMONT/GREENLEE Hydraulic Tools
Pole Tampers- Hose End Valve & Valve on TubeMakes setting poles , asphalt patching and compacting backfill faster and easier than a hand tamp. It only has three moving partsfor less problems and will work on either a open or closed system. Comes with a Kidney-shaped foot as standard equipment.
H4802-3 Number Description Width Length Ship Wt.
H4802 Pole Tamper w/ on/off valve 4” 60” 23.0 lbs.
H4802-1 Pole Tamper w/ on/off valve 4” 85” 28.0 lbs.
43227 Pole Tamper w/o on/off valve 4” 85” 28.0 lbs.
H4802-6 Pole Tamper w/o on/off valve 4” 60” 27.0 lbs.
54923 HTMA Male Coupler
54924 HTMA Female Coupler
H4803-3 Pole Tamper w/ valve on handle 4” 72” 23.0 lbs
H4802-5 Pole Tamper w/ valve on handle 4” 60” 22.0 lbs
Tamper Accessories
114255 6” Round Foot
114256 Rectangular Foot 4”x 8-13/16”
111964K Kidney-Shape Foot 2-1/2” x 8”
SPECIFICATIONS (Applies to both the Fairmont/Greenlee and Reliable Equipment Tampers on this page)
System: Open and Closed-Center Length: 28" Flow Range: 5-7 gpm Weight: 51 lbs
Pressure Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring
Hydraulic Tools
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
55
800-747-3747
FAIRMONT/GREENLEE Hydraulic Tools
ChainsawThese tools work on either an open or closed systemand comes with an automatic oiler. The safety featuresinclude a two step safety trigger, chain brake that meets ISO 6535 requirements and a reduced kickback bar and chain.
Number Cutting Capacity Ship Wt. Length Chain size/gauge Op. Pressure
43178Long-Reach ChainsawThis tool works on either an open or closed system and has a fiberglass extension that meets OSHA regulations 1910.269.
Safety features include a two-step trigger, trigger guard, andfully covered sprocket guard. It also has an anti-kickback chainand automatic chain oiler.
Press. Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring
Chain Size: .325" Bar Gauge: .058"
Number UPC Number Description
43178 43178 Long Reach Chain Saw - 62.5" overall length
54923 54923 HTMA Male Coupler
54924 54924 HTMA Female Adapter
RELIABLE EQUIPMENT Hydraulic Tools
Long Reach Chainsaw (LR Series 62.5, 75, 88.5)
Reliable long reach chainsaws have a powerful hydraulic motor that can cut up to 13" diameter limbs. It has a fiberglass extension tube, trigger guard,covered sprocket and can be used on either an open or closed system.
56
SPECIFICATIONS
System: Super SpoolTM selector for use on Open and Closed-Center hydraulic systems
Ext. Type: Fiberglass - tested to 100KvA for 5 min. Flow Range: 4-6 gpm Wt: 9 lbs Length: 82"
Pressure Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring
FAIRMONT/GREENLEE Hydraulic Tools
Overhead Circular SawThis tool works on either a open or closed system and has afiberglass extension that meets OSHA regulation 1910.269. Safetyfeatures include a hand stop safety collar, trigger guard, two-stepsafety trigger and branch stop.
43180
48200Utility PrunerThis tool works on either a open or closed system and has a fiberglass extension that meets OSHA regulation1910.269. Safety features include trigger guard and a heat-insulated handle.
Number UPC Number Description
43180 43180 Overhead Circular Saw
54923 54923 HTMA Male Coupler
54924 54904 HTMA Female Coupler
SPECIFICATIONS
System: Super SleeveTM for operation with Open and Closed-Center hydraulic systems
Ext. Type: Fiberglass - tested to 100KvA for 5 min. Flow Range: 4-6 gpm Length: 86" Width: 6.25"
Strainer: 7 x 2.5" Press. Port Thread: 9/16-18 SAE O-Ring Return Port Thread: 3/4-16 SAE O-Ring
2 1/2" Submersible PumpThis pump is self-priming with a high impact strainer housing and can pump up to 400 GPM.Can run dry without damaging the unit.
Number UPC Number Description
H4660B 42190 Submersible Pump
54923 54923 HTMA Male Coupler
54924 54924 HTMA Female Adapter
58
Hydraulic Tools
Low Pressure HosesThese hoses are certified nonconductive orange rubber with a double rayon braid. Its workingpressure is 2250psi and is tested at 75 KV/ft for 5 minutes.
Number Description
Rel-2250-96 3/8” x 8’ ID hoses with 3/8” NPTF male fitting
Rel-2250-120 3/8” x 10’ ID hoses with 3/8” NPTF male fitting
CERTIFIED NONCONDUCTIVE ORANGE RUBBER, DOUBLE RAYON BRAID
Rel-2250-96
HTMA Couplers3,000 psi maximum operating pressure.
Swivel AdaptersHose assemblies can be applied directly to the tool without the use of body assemblies or nose pieces,eliminating the quick disconnect feature by ordering one each.
Number UPC Number Description
FO16775 41615 Adapter 3/8" NPSM x 9/16-18 Straight Thread
FO17904 41661 Adapter 1/2" NPSM x 3/4-16 Straight Thread
FO16776 43270 Adapter 3/8" NPSM x 3/4-16 Straight Thread
F016775 F017904 F016776
54922
41777
54923
41779
54924
41780
54925
41778
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
59
800-747-3747
Sockets
1/2” Square Drive Impact Sockets
7324S
7121
Number L
7318S 9/16” 3-1/4”
7324S 3/4” 3-1/4”
7326S 13/16” 3-1/4”
7328S 7/8” 3-1/2”
7332S 1" 3-1/2”
DEEP LENGTH SOCKETS - 8 POINT
in. Number L
7121 7/16” 1/2” 2-3/4”
49314 7/16” 1/2”
3”
IMPACT HEX SHANKS
in. in.
Impact Sockets
Number Description
REL-ED-16
REL-ED-18
Fits most 5/8" Hardware
Fits most 3/4" Hardware
REL-ED-18
FAIRMONT/GREENLEE Sockets
NR 1
The Nut Runner is a unique accessory for installing or removing pole hardware. One end will fit 3/4" & 13/16" and the other will fit 1" & 1-1/8" hardware. The Nut Runner will accommodate bolts that extend up to 6" past the nut. It uses a 7/16" hex adapter (included) that allows you to leave it in the impact & turn the socket end for end.
Sockets
NR 1
“T” Wrench w/ Penta-Head Socket This tool is design for opening Underground (Pad-mount) or URD transformer securing bolts. It comes with aT-handle and penta-head socket together as one unit. It saves time and helps you keep from misplacing the socket.
Number Description
9076T T-handle w/ penta socket attached
9076 Penta socket only
9076T
9076
60
59003 59014
59010
KLEIN
Bits
Bits
Utility Pole Impact Auger Bits
These wood bits are designed for impact drill with a 7/16” quick change Hex size shank.
Manufacturer Size Number - length 18” Number -length 24”
Irwin 9/16” 47909 ---
Irwin 11/16” 47911 48211
Irwin 13/16” 47913 48213
Irwin 15/16” 47915 48215
Greenlee 11/16” 37869 ---
Greenlee 13/16” 37870 ---
Greenlee 15/16” 37871 ---
47911
37870
Unibit Step-Drill BitsThese bits are perfect for drilling different size holes with the singlebit. The single fluke cutting edge design assures penetration ofsofter materials. The hole size is easily determined by the diametermarkings that are permanently etched in the fluke area. They can beused on metal, plastics and wood.
Number Hole Sizes
Per Bit Size Range
(Hole Diameter) Pilot Hole Required
Electric Drill Size
Depth Penetration Per Step
1/8” to 1/2” No 1/4” and larger
1/8”
9/16” to 1” 1/2” or larger 1/2” and larger
1/8”
1/4” to 3/4” No 3/8” and larger
1/8”
13/16” to 1-3/8” 3/4” or larger 1/2” and larger
1/8”
3/16” to 1/2” No 1/4” and larger
3/8”
1/2” No 1/4” and larger
N/A
7/8” No 3/8” and larger
N/A
1-1/8” No 1/2” and larger
N/A
7/8” to 1-1/8” No 1/2” and larger
1/8”
3/16” to 7/8” No 3/8” and larger
1/8”
59001 13 in 1/32"
59002 8 in 1/16"
59003 9 in 1/16"
59004 10 in 1/16"
59005 6 in 1/16"
59007 1
59008 1
59010 1
59011 2
59014 12 in 1/16"
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
61
FAIRMONT/GREENLEE Battery Tools
Battery-Powered Quad-Point Dieless Crimping ToolThis tool utilizes four indentors with a 6.2 ton capacity to make a crimp. It has a two-speed pump that reduces the crimping time. The ram automatically retracts when crimp is complete. It features a pistol grip and 360 degree rotating head with a flip top for easy removal of the connector. It comes with two batteries, choice of 110v, 230v or a 12v one-hour battery charger, carrying case, test gauge and slugs.
SPECIFICATIONS
Capacity: Copper Color-Coded Lugs and Splices: #6 AWG - 500 MCM (750 MCM for EK06FT); Aluminum Color-Coded Lugs and Splices: #6 AWG - 400 MCM (750 MCM for EK06FT); 5/8" Aluminum Service Entrance Sleeves: #8 AWG - 1/0; .840" Aluminum Service Entrance Sleeves: #4 AWG - 350 MCM
ES750 Battery-Powered Cable CutterCompact design allows it to be used in tight spaces with heavy duty blades that cut clean. It will cut 500 MCM copper in under 8 seconds and will make approximately 20 cuts per battery charge. Includes charger (120v or 230v), carrying case and one 12v battery.
This tool utilizes four indentors with a 6.2 ton capacity to make a crimp. It has a two-speed pump that reduces the crimping time. The ram automatically retracts when crimp is complete. It features a pistol grip and 360 degree rotating head with a flip top for easy removal of the connector. It comes with two batteries, choice of 110v, 230v or a 12v one-hour battery charger, carrying case, test gauge and slugs.
EK06FT11
ES750
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
63
800-747-3747
HUSKIE Battery Tools
REC-4430 ROBO*CRIMPTM
12 Ton Battery Powered Compression Tool
Accepts all 12 ton U-Style dies, 1-3/16" jaw opening, weighs 14.4 lbs, crimps lugs to 750 MCM CU and splices to 600 MCM CU.
REC-4430
REC-3610 ROBO*CRIMPTM
15 Ton Battery Powered Compression Tool
Accepts all P-Style dies, and U-Style dies with the PU15 die adapter. 2" jaw opening, weighs 24 lbs, crimps AL #8 to 1250 MCM and CU #8 to 1500 MCM.
REC-3610
REC-54 ROBO*SLICETM
Cuts cable to 636 ACSR, 2-1/8" jaw opening, weighs 7.2 lbs, cuts CU and AL to 750 MCM.
Will NOT cut guy wire, ground rods or bolts.
REC-54
64
ANDERSON
Battery Operated Dieless Compression Tool
VC6-FT-BP Crimps: #10str.-750MCM AL/CU 12 lbs
Battery Tools
Flip-top latch, 360 degree rotating head. Comes w/2 14.4V rechargeable batteries, 15 min. AC charger and carrying case.
Number Description Ship Wt.
VC6-FT-BP
65
RELIABLE EQUIPMENT Hand Crimpers & Dies
Manual Compression Tools
Number Description
REL-O D-3 Seat Die and Fixed O Nose Die
REL-BG D-3 Seat Die and Fixed BG Nose Die
Manual Cable CrimperThe REL-642 was designed to crimp #2, #4 and #6 connectors with easeand safety to the operator. (Equivalent to Nicopress XPJ Tool) Rust-resistantand features H/D fiberglass handle and long life crimping head.
Number Description Ship Wt.
REL-642S 21-1/4" Overall Length 3.50 lbs
REL-642S
Manually operated crimper installs a full range of connectors, from #14 thru 4/0, and is equivalent to the Burndy MD-6. The tool accept W-type die inserts and features spring-loaded die retainer pins to assure positive lock, with butting HD forged steel jaws and a visual alignment system that assures proper adjustment. Standard hickory handles and fiberglass handles with anti-slip grips available.
REL-BG-FH D-3 Seat Die and Fixed Nose Die w/fiberglass handles
REL-BG
Crimping Die SetsReliable makes a large assortment of dies for crimping tools. They come in 6-ton (W-Style), 12-ton (U-Style), 15-ton (P-Style), 15-ton (PU-Adapter) for use with U-Style dies, 60-ton (Shell-Type) and 100-ton (Shell-Type).
6-ton (W-Style)12-ton (U-Style) 15-ton (P-Style)
15-ton (PU-Adapter) For Use With U-Style Dies
100-ton (Shell Type) 60-ton
(Shell Type)
Please call for assistance if unsure of the die you need.
REL-6TNUse with 6-ton W-Style Dies
REL-12TNUse with 12-ton U-Style Dies
REL-12TN(For Use With 12-Ton U-Style Dies)
REL-6TN(For Use With 6-Ton W-Style Dies)
REL-BG-FH
Handheld/PowerEquipment
Hammers 37
Ruler/Tapes 37
Knives 38
Pliers 40
Cutters 42
Screwdrivers 46
Hex Keys 47
Wrenches 47
Hydraulic 52 Tools
Sockets 60
Bits 61
Battery 63 Tools
Hand 65 Crimpers & Dies
Cable 66 Stripping Tools
800-747-3747
36001H
34244
Number Length Ship Wt
Number Length Ship Wt
35150 9.375” 1-1/4 lbs
4X4 PLUS Cable End StripperThis tool is for 600 volt secondary cable. Its cutting heads can range from #6 AWG to 500 MCM conductors depending onyour requested sizes for each end. It strips 45 mil to 110 ML XLPE, polyethylene and EPR insulation. It comes in either a
Number Description Ins Mat. Ins Thick Length w/Bushing Ship Wt
36001H 4X4 Body Only XLPE or ERP 45-110 mil 4.5" X 5" 14 oz.
Ordering Information: See page 68 for bushing selection table.
IC 1, IC 2 URD Insulation Chamfer ToolThis tool works for Okonite and 3728 EP insulation, and is perfect for premolded splices, elbows and terminators.Complete operation takes 10 seconds or less, and it adjusts easily to fit different cable insulations.
Model Number Cable O.D. Range Tool Diam. Ship Wt.
34760 .650” - 1.260” 3.50” 10 oz.
34825 1.25” - 1.875” 4.1875” 12.5 oz.
34760
Number Length Cable O.D. Range Ship Wt.
34244 9.4” .750-1.250” 13oz.
34245 9.4” 1.250-2” 13oz.
Adjustable Blade Banana PeelerAdjustable blade Semi-Con Scorer Tool that is able to score from 1 to 90 mils (.025-2.286mm). It can also be used for strippable semi-con URD cable shield. The spring loaded blades allow for precise scoring and its unique cartridge adapts to out of round cable.
UTILITY TOOL Cable Stripping Tools
square cut or chamfer cut and the bushings that can be easily changed in the field or shop.
PIT 1TDesigned for quick and easy insertion or removable of theprobe inside the elbow on 15KV to 35KV systems.
PIT 2Designed for quick and easy insertion or removable of theprobe inside the 35KV RTE elbow only.
27620 10” 1.0 lb
35900
Description
Load bushing insert tool 21 oz
LBIT-1TThis tool is designed for 200 amp bushing inserts with internal hexagon socket drive.
1700-SS Adjustable Blade Scorer w/ square cut / spiral cut and dial locking set screw (Pictured right)
1678 Replacement blade - All tools
Number Description
1700-SS
SPEED SYSTEMS
Cable Stripping Tools
Semi-Con ScorersThis tool scores (scribes) semi-con without damage to insulation.Features an adjustable blade depth of .001” to.100”, and leaf springs toguarantee constant pressure for both square and spiral cuts.
1542-2AS Stripper and scorer combo w/ one wedge blade installed, spare straight blade 2.75 lbs
Number Description Ship Wt.
1542This insulation stripper features a precise blade depth adjustment for stripping insulation and requires no bushing, making installation fast and reliable.