4th Edition - manfredgeldbach.com.tr

www.manfredgeldbach.com.tr

4th Edition

FLANGES and FITTINGS Technical Handbook 2019

1

Manfred Geldbach Turkey is a member of the Geldbach Gruppe

Geldbach Grubu, 1903 yılından bu yana flanş sektöründe faaliyet gösteren Wilhelm

Geldbach şirketinin Genel Müdürü Sayın Dr. Manfred Geldbach tarafından 1972 yılında kuruldu. Wilhelm Geldbach ve Geldbach Grubu şirketleri 1999 yılında birbirinden ayrıldı. Geldbach Grubu şirketinin yüzde yüz hissesi Geldbach Ailesi’ne aittir ve Grup 3’üncü ve kısmen de 4’üncü kuşak tarafından idare edilmektedir. Geldbach Grubu, hem yurt içinde ve de yurt dışında birbirinden hukuki ve ekonomik olarak bağımsız toplam 33 kardeş kuruluştan oluşan bir iştirak şirketidir. Bu kardeş kuruluşlardan 4’ü flanş ve bağlantı elemanları üretmekte, 29’u da kardeş kuruluşların imalatını yaptığı boru ve boru bağlantı ekipmanlarının distribütörlüğünü yapmaktadır ve aynı zamanda da rekabetçi şirketlerle de yakın işbirliği içindedirler. Karbon ve alaşımlı-alaşımsız çelik alanında ihtisaslaşmış Geldbach Grubu'nun bilgi ve teknik alt yapısı ile donatılmış olan kardeş kuruluşlar Mısır, Belçika, Brezilya, Çin, Almanya, Hollanda, İspanya, Polonya, Romanya, Tayland, Çek Cumhuriyeti, Ukrayna, Birleşik Arap Emirlikleri, İngiltere ve Türkiye’de bulunmaktadır. Geldbach Grubu’na bağlı üreticiler DNV, GL, LS, GLS ve de UDT sertifikaları ile donatılmışlardır. Çok iyi bilinen gaz ve petrol şirketlerini de içeren referans listemiz her geçen gün büyümektedir. Güncel bir referans listesi talep halinde verilir.

Geldbach Group, was founded in 1972 by Dr. Manfred Geldbach who was the general

manager of Wilhelm Geldbach Company that has been on the flange sector since 1903. Wilhelm Geldbach and Geldbach Gruppe companies separated from each other in 1999. One hundred percent of the Geldbach Gruppe company belongs to the Geldbach Family, and it has been managed by the 3rd and to some extent the 4th generation. The company is a participation company consisting of a total of 33 sister organizations that are independent from each other legally and economicaly at home and abroad. Four of these organizations produce flanges and fittings and twenty nine of them distribute the goods belonging to the sister organizations and are also working closely with competitive companies. Its sister organizations, equipped with the knowledge and technical infrastructure of Geldbach Group that is specialized in the field of carbon, alloy or non- alloy steel are in Egypt, Belgium, Brazil, China, Germany, the Netherlands, Romania, Spain, Poland, Thailand, Czech Republic, Ukraine, United Arab Emirates England and Turkey. All the manufacturers of the group are equipped with DNV, GL, LS, GLS, and also UDT certificates. Our reference list including the well known oil and gas companies has been growing every day. A current list of references is given upon request.

Manfred Geldbach bir “Geldbach Gruppe” kuruluşudur.

İÇERİK / index

5

ASME FLANŞLAR B16.5ASME FLANGES B16.5

Üretim Aralığı Productionrange

Genel Tetkik ve Teknik Teslimat Koşullar General Survey and Tecnical Terms of Delivery

Dikişli ve Dikişsiz Çelik Boruların Boyutları Dimensions of Welded and Seamless Steel Pipe

Bilezik Bağlantılı Alınlama İşlemi Ring Joint Facings

Geniş ve Küçük Kanallı / Dişi Alınlama Large and small/female facing

Geniş ve Küçük Dilli / Erkek Alınlama Large and small tongue/groove facings

Boyut Toleransları Dimensional Tolerances

Alınlama / Kaynak Uçları Facing/Welding Ends

Kaynak Boyunlu Flanşlar Welding Neck Flanges

Kaynak için Geçme Göbekli Flanşlar Slip On Flanges

Göbekli Serbest Flanşlar Lap Joint Flanges

Kör Flanşlar Blind Flanges

Soket Kaynaklı Flanşlar Socket Weld Flanges

Vida Dişli Flanşlar Threaded Flanges

BS 3293 Kaynak Boyunlu Flanşlar / Geçme Göbekli Flanşlar

Welding Neck Flanges/Slip-on Flanges

Kaynak Boyunlu Flanşlar ANSI B 16.47, Seri A Welding Neck Flanges acc. to ANSI B 16.47, Series A

Kaynak Boyunlu Flanşlar ANSI B 16.47, Seri B Welding Neck (API 605) acc. to ANSI B 16.47, Series B

16

17

1827

31

33

3536

43

49

56

6365

72

82

92

7


Uzun Kaynak Boyunlu Flanş Long Welding Flange

Vidalı, Kaynak Boyunlu ve Kör Flanşlar R.J. Yüzey Threaded, Welding Neck and Blind Flanges R.J. Faces

Dövme Soket Fittingler Sınıf 3000 Soket Weld Fitting Class 3000

Dövme Dişli Fittingler Sınıf 3000 Threaded Fittings Class 3000

Dirsek Rekor / Tee - 90° Kuyruklu Dirsek Union Elbows/Tees- 90° Street Elbows

Sınıf - Class 3000/6000

Siviç Nipel Sınıf 3000/6000 Swedge Nipple Class 3000/6000

Veldolet Sınıf 3000/6000 Weldolet Class 3000/6000

Tridolet Sınıf 3000/6000 Thredolet Class 3000/6000

Sokolet Sınıf 3000/6000 Sockolet Sınıf 3000/6000

Redüksiyon Flanşlar Sınıf 150-2500 Reducing Flanges Class 150-2500

Orifis Flanşlar Sınıf 300-2500 Orifice Flanges Class 300-2500

Flanş Malzemeleri Material for Flanges

Tornalama Şablonları Sınıf 150-2500 Templates for Drilling Class 150-2500

Contalar Gaskets

99

103

106

107

108

109

110

111

112

115

116

117

120

127

EKLER APPENDIX

9

ASME FİTTİNGSLER B16.9ASME FITTINGS B16.9

Maksimum İşletme Basınçı Maximum Internal Working Pressure

Kaynak Uçları ve Boyut Toleransları Welding Ends and Size Tolerances

SR Dirsek ve Dönüşümlü Bükümler SR Elbows and Returns

LR Dirsek - Tee - Redüksiyon - Kep - Yakalar LR Elbows - Tees - Reducers - Caps - Collars

ASTM Şartnamesi ASTM Specification

ASTM Standartları ASTM Standards

Kaynak Ağzı İşleme Ends Preparation

LR Dirsek–Tee–Redüksiyon–Kep LR Elbows - Tees - Reducers - Caps

Dirsek 45º LR Elbows 45º LR

Dirsek 90º LR Elbows 90º LR

Dirsek 180º LR Return 180º LR

Dirsek 90º SRElbows 90º SR

Dirsek 180º SR Return 180º SR

Eşit Te Straight Tees

Redüksiyon Te Reducing Tee

Kep Caps

Konstantrik ve Eksantrik Redüksiyon

Maximum Internal Working Pressure

136

137

138

139

140

141

142

144

146

147

148

149

151

168

170

11

EN FLANŞLAR EN1092–1EN FLANGES EN1092–1

Flanşlar ve Yakalar Flanges and Collars

Malzemeye Göre İmalat Süreci Manufacturing Process acc. to Material

Malzeme Seçimi Material Selection

Yüzey Kalitesi Surface Appearance

Alınlama Yüzey Kalitesi Facing Surface Appearance

Et Kalınlığı ve Kaynak Ağzı Hazırlama Wall Thickness and End Preparation

Toleranslar Tolerances

İşaretleme Marking

Flanş Yüzey Tipleri Facing Forms

Tip 01 Düz Flanş Typ 01 Plate Flanges

Tip 02;32 Kaynak Düz Yakalı Serbest Düz Flanş Typ 02;32 Lap Joint Flange with Collar

Tip 02;35 Kaynak Bilezik Boyunlu Serbest Düz Flanş Typ 02;35 Lap Joint Flange with Weld on Ring

Tip 02;36 Uzun Boy. Geçmeli Yakalı Serbest Düz Flanş Typ 02;36 Lap Joint with Flange Weld on Collar

Tip 02;33,37 Geçmeli Yakalı Serbest Düz Flanş Typ 02;33,37 Lap Joint Flange with Weld on Collar

Tip 04;34 Kaynak Boyunlu Yakalı Serbest Düz Flanş Typ 04;34 Lap Joint Flange with Short Stub End

Tip 05 Kör Flanş Typ 05 Blind Flange

Tip 11 Kaynak Boyunlu Flanş Typ 11 Welding Neck Flange

Tip 12 Kaynak için Geçme Göbekli Flanş Typ 12 Hubbed Slip–on Flange

Tip 13 Vidalı Flanş Typ 13 Threaded Flange

182

183

185

190

191

192

193

196

197

202

210

216

222

226

230

242

234

255

262

13

EN FİTTİNGLER EN10253–2EN FITTINGS EN10253–2

EN Fittingler EN Fittings

Dirsekler Tip A Elbows Typ A

Tee'ler Tip A Tees Typ A

Redüksiyonlar Tip A Reducers Typ A

Kepler Tip A Caps Typ A

Dirsekler Tip B Elbows Typ B

Tee'ler Tip B Tees Typ B

Redüksiyonlar Tip B Reducers Typ B

Toleranslar Tolerances

Uç İşleme End Preparation

Malzeme Karşılaştırma Material Comperision

270

271

275

292

304

308

312

329

341

342

343

15


16

Standardların kullanımında güncel basımları dikkate alınır.When using printed standards, the most recent issue of the original version shall prevail.

Flanş TürüType of Flange

ANSIB16.5

B.S.3293*)

ANSIB16.47

Series A MSS

SP-44*)

ANSIB16.47Series BAPI Std605*)

ANSIB16.36

Basınç DeğeriNominal Pressure

lb/sq. in.

Kaynak Boyunlu FlanşWelding Neck Flange

Kaynak Boyunlu Flanş Bilezik BağlantılıWelding Neck FlangeRing Type Joint

Kaynak İçin Geçme Göbekli FlanşSlip On Flange

Kaynak için Geçme Göbekli FlanşBilezik BağlantılıSlip On FlangeRing Type Joint

Göbekli Serbest FlanşLap Joint Flange

Kör FlanşBlind Flange

Soket Kaynaklı FlanşSocket Weld Flange

Vidalı FlanşThreaded Flange

Redüksiyon FlanşReducing Flange

Orifis FlanşOrifice

Kaynak Boyunlu YakaShort Stub Ends

Uzun Kaynak Boyunlu FlanşLong Welding Neck

150-2500

150-2500

150-1500

150-1500

150-2500

150-2500

150-1500

150-2500

150-2500

150-600

300-600

150-600

300-600

150-900

300-900

150-900

75-900

300-2500

*) Çapı 26” ve üstü olan flanşlar için Bakınız B.S. 3293, ANSI B 16.47 Series A/B

*) for flanges larger than 26” see B.S. 3293, ANSI B 16.47 Series A/B

Üretim aralığıProduction range

17

Nominal Basınç Değeri kp/cm²Basınç Değeri N/cm²

Nominal Pressure lb/ sq.in

10,6104150

21,1207300

28,1276400

42,2414600

63,3621900

10610301500

17617262500

Flanş TürleriType of Flange

1/2” ten max. Nominal Ölçülere kadar*from 1/2” to max. Nominal Sizes*

Kaynak Boyunlu FlanşlarWelding Neck Flanges

24” 24” 24” 24” 24” 24” 12”

Geçme Göbekli FlanşlarSlip-on Flanges

24” 24” 24” 24” 24” 2 1/2” -

Göbekli Serbest FlanşlarLap Joint Flanges

24” 24” 24” 24” 24” 24” 12”

Kör FlanşlarBlind Flanges

24” 24” 24” 24” 24” 24” 12”

Soket Kaynaklı FlanşlarSocket Weld Flanges

3” 3” - 3” - 2 1/2” -

Vidalı FlanşlarThreaded Flanges

24” 24” 24” 24” 24” 12” 12”

*) 24” çapın üstündeki flanşlar için bakınız B.S. 3293, ANSI B 16.47 Series A/B

*) for flanges larger than 24” see B.S. 3293, ANSI B 16.47 Series A/B

Teslimatta Geçerli olan Teknik Şartlar

Flanşların alınlanma işlemi yapılmış ve vida delikleri açılmıştır.Flanşların saplama delikleri pahlanmış veya MS-SP9’a göre işlenmiştir.Aksi talep edilmedikçe flanşlara öngörülen boyutlara göre delik açılmaktadır.

Technical Terms of delivery

Flanges are furnished faced and drilled.Flanges are back faced or spot faced according to MSS-SP 9. This applies to spot facing.Flanges are bored to the foreseen dimensionsunless otherwise required.

Toleransa ilişkin ilave açıklamalar

(ANSI B 16.5 Standardınca kapsanmaz)Tolerans değerleri DIN 2512’e göredir.Conta yüzeyi yüksekliği ± 0,5mm

Additional Remarks for Tolerances

(Not covered by ANSI B 16.5)Tolerances followed DIN 2512Height of facing ± 0,5mm

İşaretleme örneklemeleri

Flanşlar ANSI B 16.5’e göre aşağıda belirtilenbilgileri içerecek şekilde işaretlenmektedir:Üretici adı ya da markaB 16Nominal boyutBasınç değeriMalzeme tanımıIsı ya da şarj noEt kalınlığı (Schedule olarak)Conta tipi, sadece RTJ Flanş kullanılması durumunda.

Example of Marking

Flanges are marked as required in ANSI B 16.5with the following dates:Manufacturer’s name or trade markB 16Nominal sizePrimary service pressureMaterial designationHeat CodeSchedule No.Ring Number only when using Ring Joint Flanges

Flanş tipleriType of flange

Genel tetkik ve teslimatta teknik koşullarGeneral survey and technical terms of delivery

18

Boru çapı Dış ÇapOutside Diameter

Et KalınlığıWall Thickness

İç ÇapInside Diameter ²)

TanımlamaIdendification

Paslan-maz

AğırlıkKg/m

DNin. in. mm in. mm in. mm

API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.

Stainless Weightkg/m

1/8” 0.405 10,3 0.0490.0570.0680.095

1,241,451,732,41

0.3070.2910.2690.215

7,87,46,85,5

5L5L

STDXS

10304080

10S

40S80S

0,280,300,360,46

1/4” 0.540 13,7 0.0650.0730,0880,119

1,651,852,243,02

0.4100.3940.3640.302

10,410,09,27,7

5L5L

STDXS

10304080

10S

40S80S

0,490,550,620,80

3/8” 0.675 17.1 0.0650.0730.0910.126

1,651,852,313,20

0.5450.5290.4930.423

13,813,412,510,7

5L5L

STDXS

10304080

10S

40S80S

0,631,120,841,10

1/2” 0.840 21,3 0.0650.0830.0950.1090.1470.1880.294

1,652,112,412,773,734,787,47

0.7100.6740.6500.6220.5460.4640.252

18,017,116,515,813,811,76,4

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

0,801,001,151,261,621,952,54

3/4” 1.050 26,7 0.0650.0830.0950.1130.1540.2190.308

1,652,112,412,873,915,567,82

0.9200.8840.8600.8240.7420.6120.434

23,422,521,921,018,915,611,1

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

1,031,281,461,682,192,883,63

1” 1.315 33,4 0.0650.1090.1140.1330.1790.2500.358

1,652,772,903,384,556,359,09

1.1851.0971,0871.0490.9570.8150.599

30,127,927,626,624,320,715,2

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

1,292,082,182,503,234,235,45

1 1/4” 1.660 42,2 0.0650.1090.1170.1400.1910.2500.382

1,652,772,973,564,856,359,70

1.5301.4421.4261.3801.2781.1600.896

38,936,736,335,132,529,522,8

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

1,652,69

3,384,465,607,75

1 1/2” 1.900 48,3 0.0650.1090.1250.1450.2000.2810.400

1,652,773,183,685,087,14

10,15

1.7701.6821.6501.6101.5001.3381.100

45,042,841,940,938,134,028,0

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

1,903,123,404,055,407,239,54

2” 2.375 60,3 0.0650.1090.1250.1540.2180.3440.436

1,652,773,183,915,548,74

11,07

2.2452.1572.1252.0671.9391.6871.503

57,054,853,952,549,242,838,2

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

2,383,944,475,447,48

11,1013,40

Dikişli ve dikişsiz çelik boru ölçüleriDimensions of welded and seamless steel pipe

ANSI B 36.10

1) Std. = Standart et kalınlığı XS = Extra Kalın, XXS Duble Extra Kalın

1) iç çap, et kalınlığının iki ile çarpılıp, dış çaptan çıkartılması sonucu inç’in mm’ye çevrilmesiyle elde edilmiştir. Veriler inç ve mm dir.

19

Boru çapı Dış ÇapOutside Diameter




Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


2 1/2” 2.875 73,0 0.0830.1200.1880.2030.2760.3750.552

2,113,054,785,167,019,53

14,02

2.7092.6352.4992.4692.3232.1251.771

68,866,963,462,759,053,945,0

5L5L

5L

STDXS

XXS

510304080

160

5S10S

40S80S

3,715,265,468,62

11,4014,9020,40

3” 3.500 88,9 0.0830.1200.1250.1560.1880.2160.2500.2810.3000.4380.600

2,113,053,183,964,785,496,357,147,62

11,1315,24

3.3343.2603.2503.1883.1243.0683.0002.9382.9002.6242.300

84,782,882,581,079,377,976,274,673,766,658,4

5L5L5L5L5L5L5L

5L

STD

XS

XXS

510

3040

80160

5S10S

40S

80S

4,506,456,718,309,87

11,3012,9014,4015,3021,3027,70

3 1/2” 4.000 101,6 0.0830.1200.1250.1560.1880.2260,2500.2810,318

2,113,053,183,964,785,746,357,148,08

3.8343.7603.7503.6683.6243.5483.5003.4383.364

97,495,595,293,792,090,188,987,385,4

5L5L5L5L5L5L5L

STD

XS

510

3040

80

5S10S

40S

80S

5,207,407,709,54

11,4013,6014,9016,6018,60

4” 4.500 114,3 0.0830.1200.1250.1560.1880.2190.2370.2500.2810.3120.3370.4380.5310.674

2,113,053,183,964,785,566,026,357,147,928,56

11,1313,4917,12

4.3344.2604.2504.1884.1244.0624.0264.0003.9383.8763.8263.6243.4383.152

110,1108,2107,9106,4104,7103,2102,3101,6100,098,597,292,087,380,1

5L5L5L5L5L5L5L5L5L

5L

STD

XS

XXS

510

30

40

80120160

5S10S

40S

80S

5,818,348,70

10,8012,9014,9016,1016,9018,9020,8022,3028,3033,5041,00

5” 5.563 141,3 0.1090.1340.1560.1880.2190.2580.2810.3120.3440.3750.5000.6250.750

2,773,403,964,785,566,557,147,928,749,53

12,7015,8819,05

5.3455.2955.2515.1875.1255.0475.0014.9394.8754.8134.5634.3134.063

135,8134,5133,4131,7130,2128,2127,0125,5123,8122,2115,9109,5103,2

5L5L5L5L5L5L5L5L

5L

STD

XS

XXS

510

40

80120160

5S10S

40S

80S

9,4511,6013,4016,0018,6021,8023,6026,1028,5030,9040,2049,0057,40


ANSI B 36.10



20



Boru çapı

Dış ÇapOutside Diameter




Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


6” 6.625 168,3 0.1090.1340.1880.2190.2500.2800.3120.3440.3750.4320.5620.7190.864

2,773,404,785,566,357,117,928,749,53

10,9714,2718,2621,95

6.4076.3576.2496.1876.1256.0656.0015.9375.8755.7615.5015.1874.897

162,8161,5158,7157,2155,6154,1152,5150,8149,2146,4139,8131,8124,4

5L5L5L5L5L5L5L5L

5L

STD

XS

XXS

510

40

80120160

5S10S

40S

80S

11,3013,8019,2022,3025,3028,2031,4034,3037,2042,5054,2067,5079,10

8” 8.625 219,1 0.1090.1480.1880.2190.2500.2770.3120.3220.3440.3750.4060.4380.5000.5940.7190.8120.8750.906

2,773,764,785,566,357,047,928,188,749,53

10,3111,1312,7015,0918,2620,6222,2323,01

8.4078.3298.2498.1878.1258.0718.0017.9817.9377.8757.8137.7497.6257.4377.1877.0016.8756.813

213,6211,6209,5208,0206,4205,0203,3202,7201,6200,0198,5196,8193,7188,9182,6177,9174,6173,1

5L5L5L5L5L5L5L5L

5L5L

5L

STD

XS

XXS

510

2030

40

60

80100120140

160

5S10S

40S

80S

14,8019,9025,1029,2033,3036,8041,3042,5045,2049,2053,1056,9064,6075,8090,30

101,00108,00111,00

10” 10.750 273,0 0.1340.1650.1880.2190.2500.2790.3070.3440.3650.4380.5000.5940.7190.8441.0001.125

3,404,194,785,566,357,097,808,749,27

11,1312,7015,0918,2621,4425,4028,58

10.48210.42010.37410.31210.25010.19210.13610.06210.0209.8749.7509.5629.3129.0628.7508.500

266,2264,6263,4261,9260,3258,8257,4255,5254,5250,7247,6242,8236,5230,1222,2215,8

5L5L5L5L5L5L5L5L5L

5L

5L

STD

XS

XXS

510

20

30

40

6080

100120140160

5S10S

40S

80S

22,6027,8031,5036,6041,7046,4051,0056,8060,2071,7081,5095,80

115,00133,00155,00172,00

12” 12.750 323,8 0.1560.1800.2030.2190.2500.2810.3120.3300.344

3,964,575,165,566,357,147,928,388,74

12.43812.39012.34412.31212.25012.18812.12612.09012.062

315,9314,7313,5312,7311,1309,5308,0307,0306,3

5L5L5L5L5L5L5L

510

20

30

5S10S

33,0036,0040,5043,6049,7055,7061,8065,1067,80


ANSI B 36.10

21

Boru çapı





Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


12” 12.750 323,8 0.3750.4060.4380.5000.5620.6880.8441.0001.1251.312

9,5310,3111,1312,7014,2717,4821,4425,4028,5833,32

12.00011.93811.87411.75011.62611.37411.06210.75010.50010.126

304,7303,2301,5298,4295,3288,8280,9273,0266,6257,2

5L5L5L5L5L5L

5L5L5L

STD

XS

XXS

40

6080

100120140160

40S

80S

73,8079,7085,6097,40

109,00132,00160,00187,00208,00239,00

14” 14.000 355,6 0.1560.1880.2100.2190.2500.2810.3120.3440.3750.4380.4690.5000.5940.7500.9381.0941.2501.406

3,964,785,335,566,357,147,928,749,53

11,1311,9112,7015,0919,0523,8327,7931,7535,71

13.68813.62413.58013.56213.50013.43813.37613.31213.25013.12413.06213.00012.81212.50012.12411.81211.50011.188

347,7346,0344,9344,5342,9341,3339,8338,1336,5333,3331,8320,2325,4317,5307,9300,0292,1284,2

5L5L5L5L5L5L5L5L5L5L

5L5L

5L

STD

XS

5

10

20

3040

6080

100120140160

5S10S

34,2041,2046,0047,9054,6061,3068,0074,6081,2094,30

101,00107,00127,00158,00195,00224,00253,00281,00

16” 16.000 406,4 0.1650.1880.2190.2500.2810.3120.3440.3750.4380.4690.5000.6560.8441.0311.2191.4381.594

4,194,785,566,357,147,928,749,53

11,1311,9112,7016,6621,4426,1930,9636,5340,49

15.67015.62415.56215.50015.43815.37615.31215.25015.12415.06215.00014.68814.31213.93813.56213.12412.812

398,0396,8395,3393,7392,1390,6388,9387,3384,1382,6381,0373,1363,5354,0344,5333,3325,4

5L5L5L5L5L5L5L5L5L

STD

XS

5

10

20

30

406080

100120140160

5S10S

41,6047,3054,9062,6070,3077,9085,5093,10

108,00116,00123,00160,00203,00245,00286,00333,00365,00

18” 18.000 457,2 0.1650.1880.2500.2810.3120.3440.3750.4060.4380.469

4,194,786,357,147,928,749,53

10,3111,1311,91

17.67017.62417.50017.43817.37617.31217.25017.18817.12417.062

448,8447,6444,5442,9441,4439,7438,1436,6434,9433,4

5L5L5L5L5L5L5L5L

STD

5

10

20

30

5S10S

46,8053,2070,5079,2087,8096,50

105,00114,00122,00131,00




ANSI B 36.10

22

Boru çapı





Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


18” 18.000 457.2 0.5000.5620.7500.9381.1561.3751.5621.781

12,7014,2719,0523,8329,3634,9339,6745,24

17.00016.87616.50016.12415.68815.25014.87614.438

431,8428,7419,1409,5398,5387,3377,9366,7

5L5L5L5L

XS406080

100120140160

139,00156,00206,00254,00310,00363,00408,00459,00

20” 20.000 508,0 0.1880.2190.2500.2810.3120.3440.3750.4060.4380.4690.5000.5940.8121.0311.2811.5001.7501.969

4,785,546,357,147,928,749,53

10,3111,1311,9112,7015,0920,6226,1932,5438,1044,4550,01

19.62415.56219.50019.43819.37619.31219.25019.18819.12419.06219.00018.81218.37617.93817.43817.00016.50016.062

498,4496,9495,3493,7492,2490,5488,9487,4485,7484,2482,6477,8466,8455,6442,9431,8419,1408,0

5L5L5L5L5L5L5L5L5L

5L

STD

XS

5

10

20

30406080

100120140160

5S10S

52,2068,5078,5088,1097,80

107,00117,00127,00136,00146,00155,00183,00248,00311,00381,00441,00508,00564,00

22” 22.000 558,8 0.1880.2180.2500.2810.3120.3440.3750.4060.4380.4690.5000.6250.8751.1251.3751.6251.8752.125

4,785,546,357,147,928,749,53

10,3111,1311,9112,7015,8822,2328,5834,9341,2847,6353,98

21.62421.56421.50021.43821.37621.31221.25021.18821.12421.06221.00020.75020.25019.75019.25018.75018.25017.750

549,2547,7546,1544,5543,0541,3539,7538,2536,5535,0533,4527,0514,3501,6488,9476,2463,5450,8

5L5L5L5L5L5L5L5L5L5L5L5L5L

STD

XS

5

10

20

30

6080

100120140160

5S10S

65,2075,4086,4097,10

108,00118,00129,00139,00150,00160,00171,00212,00294,00373,00451,00526,00600,00671,00

24” 24.000 609,6 0.2180.2500.2810.3120.3440.3750.4060.4380.4690.5000.562

5,546,357,147,928,749,53

10,3111,1311,9112,7014,27

23.56423.50023.43823.37623.31223.25023.18823.12423.06223.00022.876

598,5596,9595,3593,8592,1590,5589,0587,3585,8584,2581,1


STD

XS

510

20

30

5S10S

82,6094,40

106,00118,00129,00141,00152,00164,00175,00187,00210,00




ANSI B 36.10

23

Boru çapı





Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


24” 24.000 609,6 0.6880.9691.2191.5311.8122.0622.344

17,4824,6130,9638,8946,0252,3759,54

22.62422.06221.56220.93820.37619.87619.312

574,6560,4547,7531,8517,6504,9490,5

5L 406080

100120140160

255,00355,00441,00547,00639,00719,00807,00

26” 26.000 660,4 0.2500.2810.3120.3440.3750.4060.4380.4690.5000.562

6,357,147,928,749,53

10,3111,1311,9112,7014,27

25.50025.43825.37625.31225.25025.18825.12425.06225.00024.876

647,7646,1644,6642,9641,3639,8638,1636,6635,0631,9


STD

XS

10

20

102,40114,96127,50140,40152,87161,40178,10190,58202,83227,42

28” 28.000 711,2 0.2500.2810.3120.3440.3750.4060.4380.4690.5000.625

6,357,147,928,749,53

10,3111,1311,9112,7015,88

27.50027.43827.37627.31227.25027.18827.12427.06227.00026.750

698,5696,9695,4693,7692,1690,6688,9687,4685,8679,4


STD

XS

10

2030

110,36123,91137,42140,00165,38181,00192,04205,00218,73272,18

30” 30.000 762,0 0.2500.2810.3120.3440.3750.4060.4380.4690.5000.625

6,357,147,928,749,53

10,3111,1311,9112,7015,88

29.50029.43829.37629.31229.25029.18829.12429.06229.00028.750

749,3474,7746,2744,5742,9741,4739,7738,2736,6730,2


STD

XS

5

10

2030

5S

10S

118,31132,85147,36162,60176,73191,20205,98220,05234,64292,06

32” 32.000 812,8 0.2500.2810.3120.3440.3750.4060.4380.4690.5000.6250.688

6,357,147,928,749,53

10,3111,1311,9112,7015,8817,48

31.50031.43831.37631.31231.25031.18831.12431.06231.00030.75030.624

800,1798,5797,0795,3793,7792,2790,5789,0787,4781,0777,8

5L5L5L5L5L5L5L5L5L5L5L

STD

XS

10

203040

126,26141,79157,28173,50188,66204,10219,91235,30250,55311,95342,70




ANSI B 36.10

24

Boru çapı





Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


34” 34.000 863,6 0.2500.2810.3120.3440.3750.4060.4380.4690.5000.6250.688

6,357,147,928,749,53

10,3111,1311,9112,7015,8817,48

33.50033.43833.37633.31233.25033.18833.12433.06233.00032.75033.624

850,9849,3847,8846,1844,5843,0841,3839,8838,2831,8828,6


STD

XS

10

203040

134,22150,72167,20170,00200,59220,00233,85240,00266,46331,83364,58

36” 36.000 914,4 0.2500.2810.3120.3440.3750.4060.4380.4690.5000.5620.6250.750

6,357,147,928,749,53

10,3111,1311,9112,7014,2715,8819,05

35.50035.43835.37635.31235.25035.18835.12435.06235.00034.87634.75034.500

901,7900,1898,6896,9895,3893,8892,1890,6889,0885,9882,6876,3

5L5L5L5L5L5L5L5L5L5L5L5L

STD

XS

10

20

3040

142,17159,67117,13180,00212,52230,00247,78251,00282,36316,82351,72420,56

38” 38.000 965,2 0.3120.3440.3750.4060.4380.4690.5000.5620.6250.6880.750

7,928,749,53

10,3111,1311,9112,7014,2715,8817,4819,05

37.37637.31237.25037.18837.12437.06237.00036.87636.75036.62436.500

949,4947,7946,1944,6942,9941,4939,8936,7933,4930,2927,1


STD

XS

187,05206,07224,45242,80261,72280,01298,27334,71371,60408,36444,42

40” 40.000 1016,0 0.3120.3440.3750.4060.4380.4690.5000.5620.6250.6880.750

7,928,749,53

10,3111,1311,9112,7014,2715,8817,4819,05

39.37639.31239.25039.18839.12439.06239.00038.87638.75038.62438.500

1000,2998,5996,9995,4993,7992,2990,6987,5984,2981,0977,9


STD

XS

196,99217,01236,68255,72275,66294,94314,18352,58391,49430,26468,28

42” 42.000 1066,8 0.3440.3750.4060.4380.4690.5000.5620.6250.6880.750

8,749,53

10,3111,1311,9112,7014,2715,8817,4819,05

41.31241.25041.18841.12441.06241.00040.87640.75040.62440.500

1049,31047,71046,21044,51043,01041,41038,31035,01031,81028,7


STD

XS

227,95248,31268,63289,59309,86330,09370,47411,32452,14492,15




ANSI B 36.10

25

Boru çapı





Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


44” 44.000 1117,6 0.3440.3750.4060.4380.4690.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.1881.250

8,749,53

10,3111,1311,9112,7014,2715,8817,4819,0520,6222,2323,8325,4026,9728,5830,1831,75

43.31243.25043.18843.12443.06243.00042.87642.75042.62442.50040.37640.25040.12440.00039.87639.75039.62439.500

1100,11098,51097,01095,31093,81092,21089,11085,81082,61079,51076,41073,11069,91066,81063,71060,41057,21054,1


STD

XS

238,90260,25281,56303,53324,77346,00388,34431,25474,03516,01557,86600,27642,56648,04

46” 46.000 1168,0 0.3440.3750.4060.4380.4590.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.1881.250

8,749,53

10,3111,1311,9112,7014,2715,8817,4819,0520,6222.2323,8325,4026,9728,5830,1831,75

45.31245.25045.18845.12445.08245.00044.87644.75044.62444.50044.37644.25044.12444.00043.87643.75043.62443.500

1150,51148,91147,41145,71144,21142,61139,51136,21133,01129,91126,81123,51120,31117,21114,11110,81107,61104,5

STD

XS

249,85272,18294,47317,46339,70361,90406,23451,14495,93539,87583,71628,11672,39715,85

48” 48.000 1219,0 0.3440.3750.4060.4380.4690.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.1881.250

8,749,53

10,3111,1311,9112,7014,2715,8817,4819,0520,6222,2323,8325,4026,9728,5830,1831,75

47.31247.25047.18847.12447.06247.00046.87646.75046.62446.50046.37646.25046.12446.00045.87645.75045.62445.500

1201,51199,91198,41196,71195,21193,61190,51187,21184,01180,91177,81174,51171,31168,21165,11161,81158,61155,5

STD

XS

260,75284,11307,39331,40354,62377,81424,11471,02520,00563,73609,53655,95702,24747,67




ANSI B 36.10

26

Boru çapı





Paslan-maz

AğırlıkKg/m


API Stan-dard

Std. ¹) XS; XXS

Sche-duleNr.


52” 52.000 1321,0 0.3750.4060.4380.4690.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.1881.250

9,5310,3111,1311,9112,7014,2715,8817,4819,0520,6222,2323,8325,4026,9728,5830,1831,75

51.25051.18851.12451.06251.00050.87650.75050.62450.50050.37650.25050.12450.00049.87649.75049.62449.500

1301,91300,41298,71297,21295,61292,51289,21286,01282,91279,81276,51273,31270,21267,11263,81260,61257,5

308,00333,00359,00384,00410,00461,00513,00562,00613,00663,55

720,00§760,87811,00

56” 56.000 1422,0 0.3750.4060.4380.4690.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.1881.250

9,5310,3111,1311,9112,7014,2715,8817,4819,0520,6222,2323,8325,4026,9728,5830,1831,75

55.25055.18855.12455.06255.00054.87654.75054.62454.50054.37654.25054.12454.00053.87653.75053.62453.500

1402,91401,41399,71398,21396,61393,51390,21387,01383,91380,81377,51374,31371,21368,11364,81361,61358,5

332,00359,00386,00414,00442,00496,00552,00606,00651,00704,65759,66773,15824,06875,00

60” 60.000 1524,0 0.3750.4060.4380.4690.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.1881.250

9,5310,3111,1311,9112,7014,2715,8817,4819,0520,6222,2323,8325,4026,9728,5830,1831,75

59.25059.18859.12459.06259.00058.87658.75058.62458.50058.37658.25058.12458.00057.87657.75057.62457.500

1504,91503,41501,71500,21498,61495,51492,21489,01485,91482,81479,51476,31473,21470,11466,81463,61460,5

356,00385,00414,00444,00473,00532,00591,00650,00709,00767,45821,00881,00939,00




ANSI B 36.10

27

Nominal SizeDN

Kana

l Say

ısı

Kanal Boyutları mmGroove Dimensions in in.

Faturalı Kısım Çapı mmDiameter of Raised Face in.

g

150lb/sq.

in.

300lb/sq.

in.

400lb/sq.

in.

600lb/sq.

in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.Ri

ng N

umbe

r

Adım

Çap

ıPi

tch

Dia

met

er

Der

inlik

D

epth

Gen

işlik

W

idth

Taba

n Ya

rıçap

ıRa

dius

at B

otto

m 150lb/sq.

in.

300400600

lb/sq. in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.

P E F R

1/2”

1/2” d

en 3

1/2”e

kad

ar o

lan

ölçü

lerd

e 60

0 lb

’ye

ait v

erile

r kul

lanı

lır.

For s

izes

1/2” t

o 3

1/2” d

ata

for 6

00lb

to b

e us

ed.

1/2”

1/2” d

en 2

1/2”e

kad

ar o

lan

ölçü

lerd

e 15

00 lb

’ye

ait v

erile

r kul

lanı

lır.

For s

izes

1/2” t

o 2

1/2” d

ata

for 1

500

lb to

be

used

.

R11 1,34434,1

0,2195,6

0,2817,1

0,030,8

2,0050,8

1/2” R12 1,56239,7

0,2506,4

0,3448,7

0,030,8

2,3860,5

3/4” 3/4” 1/2” R13 1,68842,9

0,2506,4

0,3448,7

0,030,8

2,5063,5

2,5665,0

3/4” R14 1,75044,5

0,2506,4

0,3448,7

0,030,8

2,6266,5

1” R15 1,87547,6

0,2506,4

0,3448,7

0,030,8

2,5063,5

1” 1” 1” 3/4” R16 2,00050,8

0,2506,4

0,3448,7

0,030,8

2,7569,9

2,8171,4

2,8873,2

11/4” R17 2,25057,2

0,2506,4

0,3448,7

0,030,8

2,8873,2

1 1/4” 1 1/4” 1 1/4” 1” R18 2,37560,3

0,2506,4

0,3448,7

0,030,8

3,1279,2

3,1981,0

3,2582,6

11/2” R19 2,6265,1

0,2506,4

0,3448,7

0,030,8

3,2582,5

1 1/2” 1 1/2” 1 1/2” R20 2,68868,3

0,2506,4

0,3448,7

0,030,8

3,5590,4

3,6291,9

1 1/4” R21 2,84472,2

0,3127,9

0,46911,9

0,030,8

4,00101,6

2” R22 3,25082,6

0,2506,4

0,3448,7

0,030,8

4,00101,6

2” 2” 1 1/2” R23 3,25082,6

0,3127,9

0,46911,9

0,030,8

4,25108,0

4,50114,3

2” R24 3,75095,3

0,3127,9

0,46911,9

0,030,8

4,88124,0

21/2” R25 4,000101,6

0,2506,4

0,3448,7

0,030,8

4,75120,7

2 1/2” 2 1/2” 2” R26 4,000101,6

0,3127,9

0,469 0,030,8

5,00127,0

5,25133,4

2 1/2” R27 4,250108,0

0,3127,9

0,46911,9

0,030,8

5,38136,7

2 1/2” R28 4,375111,1

0,3759,5

0,53113,5

0,061,5

5,88149,4

1) f ) Fatura alın yüksekliği ve kanal yüksekliği boyutları “E”, “E” için geçerli olan toleransları kapsamaz.

1 f ) Height of raised portion and depth of groove dimensions “E” but not covered by tolerances for “E”.

P

ANSI B 16.5

Conta / Bilezik ile AlınlamaRing Joint Facings

28

Nominal SizeDN

Kana

l Say

ısı



g

150lb/sq.

in.

300lb/sq.

in.

400lb/sq.

in.

600lb/sq.

in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.

Ring

Num

ber

Adım

Çap

ıPi

tch

Dia

met

er

Der

inlik

D

epth

Gen

işlik

W

idth

Taba

n Ya

rıçap

ıRa

dius

at B

otto

m 150lb/sq.

in.

300400600

lb/sq. in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.

P E F R

3”

1/2” d

en 3

1/2”e

kad

ar o

lan

ölçü

lerd

e 60

0 lb

’ye

ait v

erile

r kul

lanı

lır. F

or si

zes 1/2

to 3 1/2

dat

a fo

r 60

0Lb

to b

e us

ed.

R29 4,500114,3

0,2506,4

0,3448,7

0,030,8

5,25133,4

*) *) R30 4,625117,5

0,3127,9

0,46911,9

0,030,8

*)3” *)3” 3” R31 4,875123,8

0,3127,9

0,46911,9

0,030,8

5,75146,1

6,12155,4

3” R32 5,000127,0

0,3759,5

0,53113,5

0,061,5

6,62168,1

3 1/2” R33 5,188131,8

0,2506,4

0,3448,7

0,030,8

6,06153,9

3 1/2” 3 1/2” R34 5,188131,8

0,3127,9

0,46911,9

0,030,8

6,25158,8

3” R35 5,375136,5

0,3127,9

0,46911,9

0,030,8

6,62168,1

4” R36 5,875149,2

0,2506,4

0,3448,7

0,030,8

6,75171,5

4” 4” 4” 4” R37 5,875149,2

0,3127,9

0,46911,9

0,030,8

6,88174,8

7,12180,8

4” R38 6,188157,2

0,43811,1

0,65616,7

0,061,5

8,00203,2

4” R39 6,375161,9

0,3127,9

0,46911,9

0,030,8

7,62193,5

5” R40 6,750171,5

0,2506,4

0,3448,7

0,030,8

7,62193,5

5” 5” 5” 5” R41 7,125181,0

0,3127,9

0,46911,9

0,030,8

8,25209,5

8,50215,9

5” R42 7,500190,5

0,50012,7

0,78119,8

0,061,5

9,50241,3

6” R43 7,625193,7

0,2506,4

0,3448,7

0,030,8

8,62218,9

5” R44 7,625193,7

0,3127,9

0,46911,9

0,030,8

9,00228,6

6” 6” 6” 6” R45 8,312211,1

0,3127,9

0,46911,9

0,030,8

9,50241,3

9,50241,3

1) f) Fatura alın yüksekliği ve kanal yüksekliği boyutları “E”, “E” için geçerli olan toleransları kapsamaz. 300 ve 600 sınıfı yakalı Ring Joint flanşlarda, R30 yerine R31 ring ve kanal boyutları kullanılır.

1 f) Height of raised portion and depth of groove dimensions “E” but not covered by tolerances for “E”. For Ring Joint with lapped flanges in the 300, and 600lb standards, ring and groove number R 30 are used instead of R31.

g Ø min

b

P± 0.005 =0,13mmØ

f ¹ )

ER

23° ± 1/2° F±0,008” =0,2mm

+0,016”=0,41mm

-0

R≤0,06” + 0,03” - 0R≤1,6mm +0,8mm - 0R>0,06” ± 0,03”R>1,6mm ±0,8mm

ANSI B 16.5

Conta/Bilezik ile alınlamaRing Joint Facings

29

Nominal SizeDN

Kana

l Say

ısı



g

150lb/sq.

in.

300lb/sq.

in.

400lb/sq.

in.

600lb/sq.

in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.Ri

ng N

umbe

r

Adım

Çap

ıPi

tch

Dia

met

er

Der

inlik

D

epth

Gen

işlik

W

idth

Taba

n Ya

rıçap

ıRa

dius

at B

otto

m 150lb/sq.

in.

300400600

lb/sq. in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.

P E F R

6” R46 8,312211,1

0,3759,5

0,53113,5

0,061,5

9,75247,7

6” R47 9,000228,6

0,50012,7

0,78119,8

0,061,5

11,00279,4

8”R48 9,750

247,70,250

6,40,344

8,70,030,8

10,75273,1

8” 8” 8” 8” R49 10,625269,9

0,3127,9

0,46911,9

0,030,8

11,88301,8

12,12307,8

8” R50 10,625269,9

0,43811,1

0,65616,7

0,061,5

12,50317,5

8” R51 11,000279,4

0,56214,3

0,90623,0

0,061,5

13,38339,9

10”R52 12,000

304,80,250

6,40,344

8,70,030,8

13,00330,2

10” 10” 10” 10” R53 12,750323,9

0,3127,9

0,46911,9

0,030,8

14,00355,6

14,25362,0

10” R54 12,750323,9

0,43811,1

0,65616,7

0,061,5

14,62371,3

10” R55 13,500342,9

0,68817,5

1,18830,2

0,092,3

16,75425,5

12”R56 15,000

381,00,250

6,40,344

8,70,030,8

16,00406,4

12” 12” 12” 12” R57 15,000381,0

0,3127,9

0,46911,9

0,030,8

16,25412,8

16,50419,1

12” R58 15,000381,0

0,56214,3

0,90623,0

0,061,5

17,25438,2

14”R59 15,625

396,90,250

6,40,344

8,70,030,8

16,75425,5

12” R60 16,000406,4

0,68817,5

1,31233,3

0,092,3

19,50495,3

14” 14” 14” R61 16,500419,1

0,3127,9

0,46911,9

0,030,8

18,00457,2

14” R62 16,500419,1

0,43811,1

0,65616,7

0,061,5

18,38466,9

14” R63 16,500419,1

0,62515,9

1,06227,0

0,092,3

19,25489,0

g Ø min

b

P± 0.005 =0,13mmØ

f ¹ )

ER

23° ± 1/2° F±0,008” =0,2mm

+0,016”=0,41mm

-0

R≤0,06” + 0,03” - 0R≤1,6mm +0,8mm - 0R>0,06” ± 0,03”R>1,6mm ±0,8mm



ANSI B 16.5


30

Nominal SizeDN

Kana

l Say

ısı



g

150lb/sq.

in.

300lb/sq.

in.

400lb/sq.

in.

600lb/sq.

in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.

Ring

Num

ber

Adım

Çap

ıPi

tch

Dia

met

er

Der

inlik

D

epth

Gen

işlik

W

idth

Taba

n Ya

rıçap

ıRa

dius

at B

otto

m 150lb/sq.

in.

300400600

lb/sq. in.

900lb/sq.

in.

1500lb/sq.

in.

2500lb/sq.

in.

P E F R

16”R64 17,875

454,00,250

6,40,344

8,70,030,8

19,00482,6

16” 16” 16” R65 18,500469,9

0,3127,9

0,46911,9

0,030,8

20,00508,0

16” R66 18,500469,9

0,43811,1

0,65616,7

0,061,5

20,62523,7

16” R67 18,500469,9

0,68817,5

1,18830,2

0,092,3

21,50546,1

18”R68 20,375

517,50,250

6,40,344

8,70,030,8

21,50546,1

18” 18” 18” R69 21,000533,4

0,3127,9

0,46911,9

0,030,8

22,62574,5

18” R70 21,000533,4

0,50012,7

0,78119,8

0,061,5

23,38593,9

18” R71 21,000533,4

0,68817,5

1,18830,2

0,092,3

24,12612,6

20”R72 22,000

558,80,250

6,40,344

8,70,030,8

23,50596,9

20” 20” 20” R73 23,000584,2

0,3759,5

0,53113,5

0,061,5

25,00635,0

20” R74 23,000584,2

0,50012,7

0,78119,8

0,061,5

25,50647,7

20” R75 23,000584,2

0,68817,5

1,31233,3

0,092,3

26,50673,1

24”R76 26,500

673,10,250

6,40,344

8,70,030,8

28,00711,2

24” 24” 24” R77 27,250692,2

0,43811,1

0,65616,7

0,061,5

29,50749,3

24” R78 27,250692,2

0,62515,9

1,06227,0

0,092,3

30,38771,7

24” R79 27,250692,2

0,81220,6

1,43836,5

0,092,3

31,25793,8

g Ø min

b

P± 0.005 =0,13mmØ

f ¹ )

ER

23° ± 1/2° F±0,008” =0,2mm

+0,016”=0,41mm

-0

R≤0,06” + 0,03” - 0R≤1,6mm +0,8mm - 0R>0,06” ± 0,03”R>1,6mm ±0,8mm



ANSI B 16.5


31

Pipe Size

Dış çap mmOutside Diameter in.

Geniş ve Küçük Dilli

iç çap

Dış Çap mmOutside Diameter in.

Küçü

k ve

Gen

iş Ka

nallı

ların

iç ç

apı /

Insid

e D

ia. o

f La

rge

and

Smal

l Gro

ve

Faturalı alının çapı mmDia. of Raised Faced in

DN Geniş Erkek ve

GenişDilli Alın

Large Male and

Large Tongue

Küçük ErkekSmallMale

Küçük dilli Alın

Small Tongue

Inside Diameter of Large

and Small Tongue

Büyük Dilli ve Geniş

Kanallı AlınLarge

Female andLarge

Groove

Küçük Dilli Alın

Small Female

Küçük Kanallı

AlınSmall

Groove

Küçük Dilli Alınlı ve KanallıSmall

Female and Groove

Büyük Dilli Alınlı ve KanallıLarge

Female and Groove

g S T U W X Y Z K L

1/2”1,3835,1

0,7218,3

1,3835,1

1,0025,4

1,4436,6

0,7819,8

1,4436,6

0,9423,9

1,7544,5

1,8146,0

3/4”1,6942,9

0,9423,9

1,6942,9

1,3133,3

1,7544,5

1,0025,4

1,7544,5

1,2531,8

2,0652,3

2,1253,8

1”2,0050,8

1,1930,2

1,8847,8

1,5038,1

2,0652,3

1,2531,8

1,9449,3

1,4436,6

2,2557,2

2,4462,0

1 1/4”2,5063,5

1,5038,1

2,2557,2

1,8847,8

2,5665,0

1,5639,6

2,3158,7

1,8146,0

2,6266,5

2,9474,7

1 1/2”2,8873,2

1,7544,5

2,5063,5

2,1253,8

2,9474,7

1,8146,0

2,5665,0

2,0652,3

2,8873,2

3,3184,1

2”3,6291,9

2,2557,2

3,2582,6

2,8873,2

3,6993,7

2,3158,7

3,3184,1

2,8171,4

3,6291,9

4,06103,1

2 1/2”4,12

104,62,6968,3

3,7595,3

3,3885,9

4,19106,4

2,7569,9

3,8196,8

3,3184,1

4,12104,6

4,56115,8

3”5,00

127,03,3184,1

4,62117,3

4,25108,0

5,06128,5

3,3885,9

4,69119,1

4,19106,4

5,00127,0

5,44138,2

3 1/2”5,50

139,73,8196,8

5,12130,0

4,75120,7

5,56141,2

3,8898,6

5,19131,8

4,69119,1

5,50139,7

5,94150,9

4”6,19

157,24,31

109,55,69

144,55,19

131,86,25

158,84,38

111,35,75

146,15,12

130,06,19

157,26,62

168,1

Geniş erkek ve büyük dilli alın ve geniş dilli alın ile geniş kanallı alın Sınıf 150 ile uyumlu değildir.Large male and female face and large tongue and groove are not applicable to class 150 because of potential conflicts.

Geniş ve Küçük Kanallı / Dişi AlınlamaGeniş ve Küçük Dilli / Erkek Alınlama

Large and small male/female facingLarge and small tongue/groove facings

0,25”=6,4mm0,25” = 6,4mm

küçük erkeksmall male

geniş erkeklarge male

s g

0,19”=4,8mm

küçük dilli alınsmall female

büyük dilli alınlarge female

K X W L

Küçük kanallı alınSmall groove

Geniş kanallı alınLarge groove

L WK Y ZGeniş ve küçük kanallı alınSmall and large groove

Geniş ve küçük dilli alınSmall and large tongue

0,25”=4,8mm

Küçük dilli alınSmall tongue

Geniş dilli alınLarge tongue

T g U

150–2500 lb/sq.in.ANSI B 16.5

32

Pipe Size

Dış çap mmOutside Diameter in.

Geniş ve Küçük Dilli

iç çap

Dış Çap mmOutside Diameter in.

Küçü

k ve

Gen

iş Ka

nallı

ların

iç ç

apı I

nsid

e D

ia. o

f La

rge

and

Smal

l Gro

veFaturalı alının çapı mmDia. of Raised Faced in

DN Geniş Erkek ve

GenişDilli Alın

Large Male and

Large Tongue

Küçük ErkekSmallMale

Küçük dilli Alın

Small Tongue

Inside Diameter of Large

and Small Tongue

Büyük Dilli ve Geniş

Kanallı AlınLarge Fema-

le andLarge

Groove

Küçük Dilli Alın

Small Female

Küçük Kanallı

AlınSmall

Groove

Küçük Dilli Alınlı ve KanallıSmall

Female and Groove

Büyük Dilli Alınlı ve KanallıLarge

Female and Groove

g S T U W X Y Z K L

5”7,31

185,75,38

136,76,81

173,06,31

160,37,38

187,55,44

138,26,88

174,86,25

158,87,31

185,77,75

196,9

6”8,50

215,96,38

162,18,00

203,27,50

190,58,56

217,46,44

163,68,06

204,77,44

189,08,50

215,98,94

227,1

8”10,62269,7

8,38212,9

10,00254,0

9,38238,3

10,69271,5

8,44214,4

10,06255,5

9,31236,5

10,62269,7

11,06280,9

10”12,75323,9

10,50266,7

12,00304,8

11,25285,8

12,81325,4

10,56268,3

12,06306,3

11,19284,2

12,75323,9

13,19335,0

12”15,00381,0

12,50317,5

14,25362,0

13,50342,9

15,06382,5

12,56319,0

14,31363,5

13,44341,4

15,00381,0

15,44392,2

14”16,25412,8

13,75349,3

15,50393,7

14,75374,7

16,31414,3

13,81350,8

15,56395,2

14,69373,1

16,25412,8

16,69423,9

16”18,50469,9

15,75400,1

17,62447,5

16,75425,5

18,56471,4

15,81401,6

17,69449,3

16,69423,9

18,50469,9

18,94481,1

18”21,00533,4

17,75450,9

20,12511,0

19,25489,0

21,06534,9

17,81452,4

20,19512,8

19,19487,4

21,00533,4

21,44544,6

20”23,00548,2

19,75501,7

22,00558,8

21,00533,4

23,06585,7

19,81503,2

22,06560,3

20,94531,9

23,00584,2

23,44595,4

24”27,25692,2

23,75603,3

26,25666,8

25,25641,4

27,31693,7

23,81604,8

26,31668,3

25,19639,8

27,25692,2

27,69703,3

Geniş erkek ve büyük dilli alın ve geniş dilli alın ile geniş kanallı alın Sınıf 150 ile uyumlu değildir.Large male and female face and large tongue and groove are not applicable to class 150 because of potential conflicts.

0,25” = 6,4mm

Geniş ve küçük kanallı/dişi alınlamaLarge and small male/female facingGeniş ve küçük dilli/erkek alınlamaLarge and small tongue/groove facings

0,25”=6,4mm

küçük erkeksmall male

geniş erkeklarge male

s g

0,19”=4,8mm

küçük dilli alınsmall female

büyük dilli alınlarge female

K X W L

küçük kanallı alınsmall groove

geniş kanallı alınlarge groove

L WK Y Z

geniş ve küçük kanallı alınsmall and large groove

geniş ve küçük dilli alınsmall and large tongue

0,25”=4,8mm

küçük dilli alınsmall tongue

geniş dilli alınlarge tongue

T g U

ANSI B 16.5150–2500 lb/sq.in.

33

Boyut ToleranslarıDimensional Tolerances

Kaynak Boyunlu FlanşlarWelding neck flanges

Soket Kaynaklı FlanşlarSocked welding flanges

D Dışçap ¹) Outside Diameter ¹)

Dışçap 609,6 mm ye kadar iseDışçap 609,6 mm den büyük iseWhen OD is 24” or lessWhen OD is over 24”

±1,6mm±3,2mm±0,06”±0.12”

J, c İç çap ²)

Inside Diameter ²)

10” ve aşağısı12” den 18” e kadar20” ve üzeri10” and smaller12” to 18”20” and larger

+0,8mm+1,6mm+3,2mm -1,6mm+0,03”+0,06”+0,12”- 0,06”

g Conta Yüzeyi Çapı

Diameter of Contact Face

1,6mm Faturalı Alın6,4mm Faturalı AlınDilli, Kanallı, Erkek ve Dişi

0,06” Raised Face0,25” Raised FaceTongue and Groove, Male and Female

±0,8mm±0,5mm±0,5mm

±0,03”±0,02”±0,02”

a Kaynak Ağzında Göbek Çapı ²)

Diameter of Hub at Point of Welding ²)

5” ve aşağısı6” ve yukarısı5” and smaller6” and larger

+2,4mm-0,8mm+4mm-0,8mm+0,09”-0,03”+0,16”-0,03”

m Göbek Çapı ¹) Diameter of Hube at Base ¹)

Göbek Çapı 609,6mm ya da daha küçük iseGöbek Çapı 609,6mm üzeri iseWhen Hube Base is 24” or lessWhen Hube Base is over 24”

±1,6mm±3,2mm±0,06”±0,12”

I Cıvata Deliklerinin Düzenlenmesi ve Alınlama

Drilling and Facing

Cıvata Dairesi Çapı kCıvata merkez çapları uzaklığıCıvata çapları k arasındaki dışmerkezlilik ve işlenen alınlama:21/2” ve daha küçük3” ve daha büyük ölçeklerBolt Circle Diameter kCenter - to - center of adcacent bolt holes Max. eccentricitybetween bolt circle dia. k and machined facing diameters:Sizes 21/2” and smallerSizes 3” and larger

±1,6mm±0,8mm

0,8mm1,6mm

±0,06”±0,03”

0,03”0,06”

h Göbek Tam Yüksekliği

Overall Length through Hub

4” ve altı5” ile 10” arası12” ve üzeri4” and smaller5” to 10”12” and larger

±1,6mm+1,6mm-3,2mm+3,2mm-4,6mm±0,06”+0,06”-0,12”+0,12”-0,18”

b Flanş kalınlığı

Thickness

18” ve altı20” ve üzeri18” and smaller20” and larger

+3,2mm+4,8mm+0,12”+0,19”

ma

JØ

gkD

k

I Ø

mJ

cgD

I Ø h

b

bh

0,06” = 1,6mm

37 1/2°

p

ANSI B 16.5

Not

for F

lang

es w

ith

Ring

Join

tRT

J Fla

nşla

r iç

in g

eçer

li de

ğild

ir]

1) ANSI B16.5 sözkonusu toleransları içermez.2) J ve a çaplarının toleranslarına bakılmaksızın et kalınlığı, nominal et kalınlığının %87,5 altında olmalıdır.

1) This tolerances are not covered by ANSI B16.5 2) Regardless of the tolerances of the dimensions J and a, the wall thickness shall not be less than %87,5 of the nominal wall thicknesses.

34

----

Boyut ToleranslarıDimensional TolerancesGöbekli Serbest, Geçme Göbekli, Vida Dişli ile Kör FlanşlarLap joint, Slip–on, threaded and blind flanges

D Dışçap ¹) Outside Diameter ¹)

Dışçap 609,6 mm ve aşağısı iseDışçap 609,6 mm den büyük iseWhen OD is 24” or lessWhen OD is over 24”

±0,06”±0.12”±1,6mm±3,2mm

J İç çap

Inside Diameter

Serbest ve Kaynak için Geçme Göbekli Flanşlar 10” ve aşağısı 12” ve üzeriVida dişli Flanşlar

Slip-on and Lap Joint 10” and smaller12” and largerThreaded Flanges

+0,8mm+1,6mmağız içi mastar dahilinde

+0,03”+0,06”Within limits on boring gauge

Havşanın Çapı Diameter of Counterbore

İç çap ile eşdeğerSame as for Inside

c Conta Yüzeyinin Capı

Diameter of Contact Face

1,6mm Faturalı Alın6,4mm Faturalı AlınDilli, Kanallı, Erkek ve Dişi

0,06” Raised Face0,25” Raised FaceTongue and Groove, Male and Female

±0,8mm±0,5mm±0,5mm

±0,03”±0,02”±0,02”

m Kaynak Ağzında Göbek çapı ¹)

Outside Diameter of Hub ¹)

12” ve aşağısı14” ve yukarısı12” and smaller14” and larger

+2,4mm-1,6mm±3,2mm+0,09”-0,06”±0,12”

I Cıvata Deliklerinin Düzenlenmesi ve Alınlama

Drilling and Facing

Cıvata Dairesi Çapı Cıvata merkez çapları uzaklığıcivata çapları k arasındaki dışmerkezlilik ve işlenen Alınlama:21/2” ve daha küçük3” ve daha büyük ölçeklerBolt Circle Diameter kCenter - to - center of adcacent bolt holes Max. eccentricitybetween bolt circle dia. k and machined facing diameters:Sizes 21/2” and smallerSizes 3” and larger

±1,6mm±0,8mm

0,8mm1,6mm

±0,06”±0,03”

0,03”0,06”

h Göbek Tam Yüksekliği

Overall Length through Hub

18” ve aşağısı20” ve üzeri

18” and smaller20” and larger

+3,2mm, -0,8mm +4,8mm, -1,6mm

+0,12”-0,03”+0,19”-0,03”

b Flanş kalınlığı

Thickness

18” ve altı20” ve üzeri18” and smaller20” and larger

+3,2mm+4,8mm+0,12”+0,19”

ANSI B 16.5

]N

ot fo

r Fla

nges

with

Ri

ng Jo

int

RTJ F

lanş

lar

için

geç

erli

deği

ldir

m

J

c

K

D

I Ø

bh

1) ANSI B16.5 sözkonusu toleransları içermez. 1) This tolerances are not covered by ANSI B16.5

35

Alınlamada mekanik işleme yöntemi, aşağıdaki koşulları içeren yüzey özelliği ile gerçekleştirilmektedir:

Facing is made by mechanical turning, resulting the following surface conditions:

Bilezik Birleştirmeli AlınlamaRing Joint Facings

Dilli/KanallıKüçük erkek/dilli alınlama

Tongue/GrooveSmale Male/Female Facings

Farklı alınlama talepleri için lütfen sorunuzFacings in other design on enquiry

Ra =

1,6

<

Ra = 3,2<

a= Boru- dışçapı Outside diameter of pipe

J= Boru- iççapı Inside diameter of pipe

t= Boru- etkalınlığı Wall thickness of pipe

Flanş alınlama işlemiFlange facing finish

Faturalı alınGeniş erkek/dişi alınlama

Raised FaceLarge Male/Female Facings

r ~ 1,6mm veya daha üstür ~ 0,06” or larger

Devir sayısı: 0,45-0,57mm/UFeet rate per revolution: 0,018-0,023 in/rev.

Kaynak uçlarıWelding ends

ANSI B 16.5 / ANSI B16.25

aØ

371/2°±21/2°0,06”±0,03”=1,6mm±0,8mm

J Ø

m Ø

min.0,25”=6,4mm

7° max.

45° max.

0,06”±0,03”=1,6mm±0,8mm

aØ

371/2°±21/2°

min.Radius 0,12”=3,0mmm

min.0,25”=6,4mm

10° ±1°

7° max.

45° max.

m Ø

J Ø

Kaynak ağzı için et kalınlığı (t) 4,8mm den 22,2 mm e kadarBevel for Wall Thicknesses (t) 0,19” to 0,88” inclusive

Kaynak ağzı için et kalınlığı 22,2 mm den büyük Bevel for Wall thicknesses (t) greater than 0,88”

t t

Ra (µm) Ra (µm)

rAARH 125-250 (µinch)Ra 3,2’den 6,3’e kadar (µm)

0,75"19mm

36

Boru Pipe

FlanşFlange

Göbek Hub

FaturaRaised

Face

Civatalama ŞablonuDrilling Template

AğırlıkApprox.Weight

Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

gin.

mm

SayıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,5088,9

0,6215,7

0,4411,2

1,8847,8

0,8421,3

1,1930,2

1,3835,1

4 0,6215,7

2,3860,5

1,10,48

3/4” 1,0526,7

3,8898,6

0,8220,8

0,5012,7

2,0652,3

1,0526,7

1,5038,1

1,6942,9

4 0,6215,7

2,7569,9

1,60,71

1” 1,31533,4

4,25108,0

1,0526,7

0,5614,2

2,1955,6

1,31533,4

1,9449,3

2,0050,8

4 0,6215,7

3,1279,2

2,21,01

1 1/4” 1,6642,2

4,62117,3

1,3835,1

0,6215,7

2,2557,2

1,6642,2

2,3158,7

2,5063,5

4 0,6215,7

3,5088,9

2,91,33

1 1/2” 1,9048,3

5,00127,0

1,6140,9

0,6917,5

2,4462,0

1,9048,3

2,5665,0

2,8873,2

4 0,6215,7

3,8898,6

3,81,72

2” 2,37560,3

6,00152,4

2,0752,6

0,7519,1

2,5063,5

2,37560,3

3,0677,7

3,6291,9

4 0,7519,1

4,75120,7

5,72,58

2 1/2” 2,87573,0

7,00177,8

2,4762,7

0,8822,4

2,7569,9

2,87573,0

3,5690,4

4,12104,6

4 0,7519,1

5,50139,7

9,14,11

3” 3,5088,9

7,50190,5

3,0778,0

0,9423,9

2,7569,9

3,5088,9

4,25108,0

5,00127,0

4 0,7519,1

6,00152,4

10,84,92

3 1/2” 4,00101,6

8,50215,9

3,5590,2

0,9423,9

2,8171,4

4,00101,6

4,81122,2

5,50139,7

8 0,7519,1

7,00177,8

13,46,08

4” 4,50114,3

9,00228,6

4,03102,4

0,9423,9

3,0076,2

4,50114,3

5,31134,9

6,19157,2

8 0,7519,1

7,50190,5

15,16,84

5” 5,563141,3

10,00254,00

5,05128,3

0,9423,9

3,5088,9

5,563141,3

6,44163,6

7,31185,7

8 0,8822,4

8,50215,9

18,98,56

6” 6,625168,3

11,00279,4

6,07154,2

1,0025,4

3,5088,9

6,625168,3

7,56192,0

8,50215,9

8 0,8822,4

9,50241,3

23,310,6

8” 8,625219,1

13,50342,9

7,98202,7

1,1228,4

4,00101,6

8,625219,1

9,69246,1

10,62269,7

8 0,8822,4

11,75298,5

38,817,6

10” 10,75273

16,00406,4

10,02254,5

1,1930,2

4,00101,6

10,75273

12,00304,8

12,75323,9

12 1,0025,4

14,25362,0

53,024,0

12” 12,75323,8

19,00482,6

12,00304,8

1,2531,8

4,50114,3

12,75323,8

14,38365,3

15,00381,0

12 1,0025,4

17,00431,8

80,436,5

14” 14,0355,6

21,00533,4

Sipa

riş e

den

tara

fında

n be

lirle

nir

To b

e sp

ecifi

ed b

y pu

rcha

ser

1,3835,1

5,00127,0

14,0355,6

15,75400,1

16,25412,8

12 1,1228,4

18,75476,3

10748,4

16” 16,0406,4

23,50596,9

1,4436,6

5,00127,0

16,0406,4

18,00457,2

18,50469,9

16 1,1228,4

21,25539,8

13460,6

18” 18,0457,2

25,00635,0

1,5639,6

5,50139,7

18,0457,2

19,88505,0

21,00533,4

16 1,2531,8

22,75577,9

15168,3

20” 20,0508

27,50698,5

1,6942,9

5,69144,5

20,0508

22,00558,8

23,00584,2

20 1,2531,8

25,00635,0

18684,5

24” 24,0609,6

32,00812,8

1,8847,8

6,00152,4

24,0609,6

26,12663,4

27,25692,2

20 1,3835,1

29,50749,3

253115

ANSI B 16.5

150 lb/sq. in.

Kaynak boyunlu flanşlarWelding neck flanges

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

0.06” (1,6 m

m)

JØ

Dk

IØ

37

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,2

0,6215,7

0,5614,2

2,0652,3

0,8421,3

1,5038,1

1,3835,0

4 0,6215,7

2,6266,5

1,70,75

3/4” 1,0526,7

4,62117,3

0,8220,8

0,6215,7

2,2557,2

1,0526,7

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,81,26

1” 1,31533,4

4,88124,0

1,0526,7

0,6917,5

2,4462,0

1,31533,4

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,51,52

1 1/4” 1,6642,2

5,25133,4

1,3835,1

0,7519,1

2,5665,0

1,6642,2

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

4,52,03

1 1/2” 1,9048,3

6,12155,4

1,6140,9

0,8120,6

2,6968,3

1,9048,3

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

6,42,89

2” 2,37560,3

6,50165,1

2,0752,6

0,8822,4

2,7569,9

2,37560,3

3,3184,0

3,6291,9

8 0,7519,1

5,00127,0

7,53,40

2 1/2” 2,87573,0

7,50190,5

2,4762,7

1,0025,4

3,0076,2

2,87573,0

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

11,45,17

3” 3,5088,9

8,25209,6

3,0778,0

1,1228,4

3,1279,2

3,5088,9

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

15,36,93

3 1/2” 4,00101,6

9,00228,6

3,5590,2

1,1930,2

3,1981,0

4,00101,6

5,25133,4

5,50139,7

8 0,8822,4

7,25184,2

19,18,67

4” 4,50114,3

10,00254,0

4,03102,4

1,2531,8

3,3885,9

4,50114,3

5,75146,1

6,19157,2

8 0,8822,4

7,88200,2

24,711,2

5” 5,563141,3

11,00279,4

5,05128,3

1,3835,1

3,8898,6

5,563141,3

7,00177,8

7,31185,7

8 0,8822,4

9,25235,0

33,315,1

6” 6,625168,3

12,50317,5

6,07154,2

1,4436,6

3,8898,6

6,625168,3

8,12206,2

8,50215,9

12 0,8822,4

10,62269,7

42,419,1

8” 8,625219,1

15,00381,0

7,98202,7

1,6241,1

4,38111,3

8,625219,1

10,25260,4

10,62269,7

12 1,0025,4

13,00330,2

65,929,9

10” 10,75273

17,50444,5

10,02254,5

1,8847,8

4,62117,3

10,75273

12,62320,5

12,75323,9

16 1,1228,4

15,25387,4

94,142,7

12” 12,75323,8

20,50520,7

12,00304,8

2,0050,8

5,12130,0

12,75323,8

14,75374,7

15,00381,0

16 1,2531,8

17,75450,9

13661,8

14” 14,0355,6

23,0584,2

Sipa

riş e

den

tara

fında

n be

lirle

nit

To b

e sp

ecifi

ed b

y pu

rcha

ser

2,1253,8

5,62142,7

14,00355,6

16,75425,5

16,25412,8

20 1,2531,8

20,25514,4

18985,8

16” 16,0406,4

25,50647,7

2,2557,2

5,75146,1

16,00406,4

19,00482,6

18,50469,9

20 1,3835,1

22,50571,5

234106

18” 18,0457,2

28,00711,2

2,3860,5

6,25158,8

18,00457,2

21,00533,4

21,00533,4

24 1,3835,1

24,75628,7

289131

20” 20,0508

30,50774,7

2,5063,5

6,38162,1

20,00508

23,12587,2

23,00584,2

24 1,3835,1

27,00685,8

348158

24” 24,0609,6

36,00914,4

2,7569,8

6,62168,1

24,00609,6

27,62701,5

27,25692,2

24 1,6241,1

32,00812,8

507230

300 lb/sq. in.


ANSI B 16.5

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

0.06” (1,6 m

m)

JØ

Dk

IØ

38

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

3 1/2” 4,00101,6

4” 4,50114,3

10,00254,0

1,3835,1

3,7595,30

4,50114,3

5,75146,1

6,19157,2

8 1,0025,4

7,88200,2

28,212,8

5” 5,563141,3

11,00279,4

1,5038,1

4,25108,00

5,563141,3

7,00177,8

7,31185,7

8 1,0025,4

9,25235,0

37,216,9

6” 6,625168,3

12,50317,5

1, 6241,1

4,31109,50

6,625168,3

8,12206,2

8,50215,9

12 1,0025,4

10,62269,7

48,522,0

8” 8,625219,1

15,00381,0

1,8847,8

4,87123,70

8,625219,1

10,25260,4

10,62269,7

12 1,1228,4

13,00330,2

76,434,7

10” 10,75273

17,50444,5

2,1253,8

5,13130,30

10,75273

12,62320,5

12,75323,9

16 1,2531,8

15,25387,4

10748,5

12” 12,75323,8

20,50520,7

2,2557,2

5,63143,00

12,75323,8

14,75374,7

15,00381,0

16 1,3835,1

17,75450,9

15369,6

14” 14,0355,6

23,00584,2

2,3860,5

6,13155,70

14,0355,6

16,75425,5

16,25412,8

20 1,3835,1

20,25514,4

21095,5

16” 16,0406,4

25,50647,7

2,5063,5

6,25158,80

16,0406,4

19,00482,6

18,50469,9

20 1,5038,1

22,50571,5

260118

18” 18,0457,2

28,00711,2

2,6266,5

6,75171,50

18,0457,2

21,00533,4

21,00533,4

24 1,5038,1

24,75628,7

319145

20” 20,0508

30,50774,7

2,7569,9

6,87174,50

20,0508

23,12587,2

23,00584,2

24 1,6241,1

27,00685,8

381173

24”24,0

609,636,00914,4

3,0076,2

7,13181,10

24,0609,6

27,62701,5

27,25692,2

24 1,8847,8

32,00812,8

549249

Bu ölçüler için Sınıf 600 ün boyutlarını kullanınız.Use 600 lb dimensions for these sizes

Sipa

riş e

den

tara

fında

n be

lirle

nir.

To b

e sp

ecifi

ed b

y pu

rhas

er

400 lb/sq. in.


ANSI B 16.5

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

JØ

Dk

IØ

0.25” (6,4 mm

)

39

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

Sipa

riş e

den

tara

fında

n be

lirle

nir

To b

e sp

ecifi

ed b

y pu

rcha

ser

0,5614,2

2,3158,70

0,8421,3

1,5038,1

1,3835,1

4 0,6215,7

2,6266,5

1,90,87

3/4” 1,0526,7

4,62117,3

0,6215,7

2,5063,50

1,0526,7

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

3,21,45

1” 1,31533,4

4,88124,0

0,6917,5

2,6968,40

1,31533,4

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,91,76

1 1/4” 1,6642,2

5,25133,4

0,8120,6

2,8772,90

1,6642,2

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

5,52,49

1 1/2” 1,9048,3

6,12155,4

0,8822,4

3,0076,20

1,9048,3

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

7,73,49

2” 2,37560,3

6,50165,1

1,0025,4

3,1379,50

2,37560,3

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

9,64,36

2 1/2” 2,87573,0

7,50190,5

1,1228,4

3,3785,60

2,87573,0

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

14,26,43

3” 3,5088,9

8,25209,6

1,2531,8

3,5088,90

3,5088,9

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

18,88,53

3 1/2” 4,00101,6

9,00228,6

1,3835,1

3,6392,20

4,00101,6

5,25133,4

5,50139,7

8 1,0025,4

7,25184,2

23,610,7

4” 4,50114,3

10,75273,1

1,5038,1

4,25108,00

4,50114,3

6,00152,4

6,19157,2

8 1,0025,4

8,50215,9

38,317,4

5” 5,563141,3

13,00330,2

1,7544,5

4,75120,70

5,563141,3

7,44189,0

7,31185,7

8 1,1228,4

10,50266,7

64,329,2

6” 6,625168,3

14,00355,6

1,8847,8

4,87123,70

6,625168,3

8,75222,3

8,50215,9

12 1,1228,4

11,50292,1

76,934,9

8” 8,625219,1

16,50419,1

2,1955,6

5,50139,70

8,625219,1

10,75273,1

10,62269,7

12 1,2531,8

13,75349,3

11953,9

10” 10,75273

20,00508,0

2,5063,5

6,25158,80

10,75273

13,50342,9

12,75323,9

16 1,3835,1

17,00431,8

19186,5

12” 12,75323,8

22,00558,8

2,6266,5

6,37161,80

12,75323,8

15,75400,1

15,00381,0

20 1,3835,1

19,25489,0

227103

14” 14,0355,6

23,75603,3

2,7569,9

6,75171,50

14,0355,6

17,00431,8

16,25412,8

20 1,5038,1

20,75527,1

269122

16” 16,0406,4

27,00685,8

3,0076,2

7,25184,20

16,0406,4

19,50495,3

18,50469,9

20 1,6241,1

23,75603,3

374170

18” 18,0457,2

29,25743,0

3,2582,6

7,50190,50

18,0457,2

21,50546,1

21,00533,4

20 1,7544,5

25,75654,1

449 204

20” 20,0508

32,00812,8

3,5088,9

7,75196,90

20,0508

24,00609,6

23,00584,2

24 1,7544,5

28,50723,9

560254

24” 24,0609,6

37,00939,8

4,00101,6

8,25209,60

24,0609,6

28,25717,6

27,25692,2

24 2,0050,8

33,00838,2

789358

600 lb/sq. in.


ANSI B 16.5

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

JØ

Dk

IØ

0.25” (6,4 mm

)

40

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2”0,8421,3

Sipa

riş e

den

tara

fında

n be

lirle

nir

To b

e sp

ecifi

ed b

y pu

rcha

ser

3/4”1,0526,7

1”1,31533,4

1 1/4”1,6642,2

1 1/2”1,9048,3

2”2,37560,3

2 1/2”2,87573,0

3”3,5088,9

9,50241,3

1,5038,1

4,25108,00

3,5088,9

5,00127,0

5,00127,0

8 1,0025,4

7,50190,5

30,213,7

4”4,50

114,311,50292,1

1,7544,4

4,75120,70

4,50114,3

6,25158,7

6,19157,2

8 1,2531,8

9,25234,9

49,622,5

5”5,563141,3

13,75349,3

2,0050,8

5,25133,40

5,563141,3

7,50190,5

7,31185,7

8 1,3835,1

11,00279,4

82,437,4

6”6,625168,3

15,00381,0

2,1955,6

5,75146,10

6,625168,3

9,25235,0

8,50215,9

12 1,2531,8

12,50317,5

10547,7

8”8,625219,1

18,50469,9

2,5063,5

6,63168,40

8,625219,1

11,75298,5

10,62269,7

12 1,5038,1

15,50393,7

17981,3

10”10,75273

21,50546,1

2,7569,9

7,50190,50

10,75273

14,50368,3

12,75323,9

16 1,5038,1

18,50469,9

262119

12”12,75323,8

24,00609,6

3,1279,2

8,13206,50

12,75323,8

16,50419,1

15,00381,0

20 1,5038,1

21,00533,4

346157

14”14,0

355,625,25641,4

3,3885,9

8,63219,20

14,0355,6

17,75450,9

16,25412,8

20 1,6241,1

22,00558,8

379180

16”16,0

406,427,75704,9

3,5088,9

8,75222,30

16,0406,4

20,00508,0

18,50469,9

20 1,7544,5

24,25616

478217

18”18,0

457,231,00787,4

4,00101,6

9,25235,00

18,0457,2

22,25565,2

21,00533,4

20 2,0050,8

27,00685,8

643292

20”20,0508

33,75857,3

4,25108

10,00254,00

20,0508

24,50622,3

23,00584,2

20 2,1253,8

29,50749,3

797362

24”24,0

609,641,00

1041,45,50

139,711,75

298,5024,0

609,629,50749,3

27,25692,2

20 2,6266,5

35,50901,7

1465665

Bu ölçüler için Sınıf 1500 ün boyutlarını kullanınız.Use 1500 lb dimensions for these sizes

900 lb/sq. in.


ANSI B 16.5

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

JØ

Dk

IØ

0.25” (6,4 mm

)

41

Boru Pipe

FlanşFlange

Göbek Hub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

4,75120,7

Sipa

riş e

den

tara

fında

n be

lirle

nir

To b

e sp

ecifi

ed b

y pu

rcha

ser

0,8822,4

2,6366,80

0,8421,3

1,5038,1

1,3835,1

4 0,8822,4

3,2582,6

4,11,87

3/4” 1,0526,7

5,12130,0

1,0025,4

3,0076,20

1,0526,7

1,7544,5

1,6942,9

4 0,8822,4

3,5088,9

5,62,56

1” 1,31533,4

5,88149,4

1,1228,4

3,1379,50

1,31533,4

2,0652,3

2,0050,8

4 1,0025,4

4,00101,6

8,23,74

1 1/4” 1,6642,2

6,25158,8

1,1228,4

3,1379,50

1,6642,2

2,5063,5

2,5063,5

4 1,0025,4

4,38111,3

9,54,33

1 1/2” 1,9048,3

7,00177,8

1,2531,8

3,5088,90

1,9048,3

2,7569,9

2,8873,2

4 1,1228,4

4,88124

13,15,94

2” 2,37560,3

8,50215,9

1,5038,1

4,25108,00

2,37560,3

4,12104,6

3,6291,9

8 1,0025,4

6,50165,1

23,810,8

2 1/2” 2,87573,0

9,62244,3

1,6241,1

4,37111,00

2,87573,0

4,88124

4,12104,6

8 1,1228,4

7,50190,5

33,015,0

3” 3,5088,9

10,50266,7

1,8847,8

4,87123,70

3,5088,9

5,25133,4

5,00127,0

8 1,2531,8

8,00203,2

43,819,9

4” 4,50114,3

12,25311,2

2,1253,8

5,13130,30

4,50114,3

6,38162,1

6,19157,2

8 1,3835,1

9,50241,3

65,929,9

5” 5,563141,3

14,75374,7

2,8873,2

6,37161,80

5,563141,3

7,75196,9

7,31185,7

8 1,6241,1

11,50292,1

12255,4

6” 6,625168,3

15,50393,7

3,2582,6

7,00177,80

6,625168,3

9,00228,6

8,50215,9

12 1,5038,1

12,50317,5

15168,4

8” 8,625219,1

19,00482,6

3,6291,9

8,63219,20

8,625219,1

11,50292,1

10,62269,7

12 1,7544,5

15,50393,7

258117

10” 10,75273

23,00584,2

4,25108,0

10,25260,40

10,75273

14,50368,3

12,75323,9

12 2,0050,8

19,00482,6

427194

12” 12,75323,8

26,50673,1

4,88124

11,37288,80

12,75323,8

17,75450,9

15,00381,0

16 2,1253,8

22,50571,5

634288

14” 14,0355,6

29,50749,3

5,25133,4

12,00304,80

14,0355,6

19,50495,3

16,25412,8

16 2,3860,5

25,00635,0

837380

16” 16,0406,4

32,50825,5

5,75146,1

12,50317,50

16,0406,4

21,75552,5

18,50469,9

16 2,6266,5

27,75704,9

1068485

18” 18,0457,2

36,00914,4

6,38162,1

13,13333,50

18,0457,2

23,50596,9

21,00533,4

16 2,8873,2

30,50774,7

1419644

20” 20,0508

38,75984,3

7,00177,8

14,25362,00

20,0508

25,25641,4

23,00584,2

16 3,1279,2

32,75831,9

1707775

24”24,0

609,646,00

1168,48,00

203,216,25

412,8024,0

609,630,00762,0

27,25692,2

16 3,6291,9

39,00990,6

27141232

1500 lb/sq. in.


ANSI B 16.5

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

JØ

Dk

IØ

0.25” (6,4 mm

)

42

2500 lb/sq.in.


ANSI B 16.5

a

h

mg

b

0.06"=1,6mm

37,5° ± 2,5°

JØ

Dk

IØ

0.25” (6,4 mm

)

Boru FlanşFlange

Göbek Hub

Fatura

Face

AğırlıkApprox.

Nom.

DN

DışÇap

ODmm

D

mm

J

mm

b

mm

h

mm

a

mm

m

mm

g

mmsayısıNum-

ber

I

mm

k

mm

~Pounds

Kg

½”0,8421,3

5,25133,4

1,1930,2

3,1379,50

0,8421,3

1,6942,9

1,3835,1

4 0,8822,4

3,5088,9

6,93,12

¾”1,0526,7

5,50139,7

1,2531,8

3,3785,60

1,0526,7

2,0050,8

1,6942,9

4 0,8822,4

3,7595,3

8,13,70

1”1,31533,4

6,25158,8

1,3835,1

3,7595,30

1,31533,4

2,2557,2

2,0050,8

4 1,0025,4

4,25108,0

11,55,24

1 ¼”1,6642,2

7,25184,2

1,5038,1

4,00101,60

1,6642,2

2,8873,2

2,5063,5

4 1,1228,4

5,12130,0

17,07,74

1 ½”1,9048,3

8,00203,2

1,7544,5

4,63117,60

1,9048,3

3,1279,2

2,8873,2

4 1,2531,8

5,75146,1

24,010,9

2”2,37560,3

9,25235,0

2,0050,8

5,25133,40

2,37560,3

3,7595,3

3,6291,9

8 1,1228,4

6,75171,5

35,716,2

2 ½”2,87573,0

10,50266,7

2,2557,2

5,87149,10

2,87573,0

4,50114,3

4,12104,6

8 1,2531,8

7,75196,9

52,223,7

3”3,5088,9

12,00304,8

2,6266,5

6,87174,50

3,5088,9

5,25133,4

5,00127,0

8 1,3835,1

9,00228,6

79,736,2

4”4,50

114,314,00355,6

3,0076,2

7,75196,90

4,50114,3

6,50165,1

6,19157,2

8 1,6241,1

10,75273,1

12255,3

5”5,563141,3

16,50419,1

3,6291,9

9,25235,00

5,563141,3

8,00203,2

7,31185,7

8 1,8847,8

12,75323,9

20492,5

6”6,625168,3

19,00482,6

4,25108,0

11,00279,40

6,625168,3

9,25235,0

8,50215,9

8 2,1253,8

14,50368,3

315143

8”8,625219,1

21,75552,5

5,00127,0

12,75323,90

8,625219,1

12,00304,8

10,62269,7

12 2,1253,8

17,25438,2

474215

10”10,75273

26,50673,1

6,50165,1

16,75425,50

10,75273

14,75374,7

12,75323,9

12 2,6266,5

21,25539,8

894406

12” 12,75323,8

30,00762,0

7,25184,2

18,50469,90

12,75323,8

17,38441,5

15,00381,0

12 2,8873,2

24,38619,3

1260572

43

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,5088,9

0,8822,4

0,4411,2

0,6215,7

1,1930,2

1,3835,1

4 0,6215,7

2,3860,5

0,90,39

3/4” 1,0526,7

3,8898,6

1,0927,7

0,5012,7

0,6215,7

1,5038,1

1,6942,9

4 0,6215,7

2,7569,9

1,20,56

1” 1,31533,4

4,25108,0

1,3634,5

0,5614,2

0,6917,5

1,9449,3

2,0050,8

4 0,6215,7

3,1279,2

1,70,78

1 1/4” 1,6642,2

4,62117,3

1,7043,2

0,6215,7

0,8120,6

2,3158,7

2,5063,5

4 0,6215,7

3,5088,9

2,31,03

1 1/2” 1,9048,3

5,00127,0

1,9549,5

0,6917,5

0,8822,4

2,5665,0

2,8873,2

4 0,6215,7

3,8898,6

2,91,32

2” 2,37560,3

6,00152,4

2,4462,0

0,7519,1

1,0025,4

3,0677,7

3,6291,9

4 0,7519,1

4,75120,7

4,52,06

2 1/2” 2,87573,0

7,00177,8

2,9474,7

0,8822,4

1,1228,4

3,5690,4

4,12104,6

4 0,7519,1

5,50139,7

7,23,28

3” 3,5088,9

7,50190,5

3,5790,7

0,9423,9

1,1930,2

4,25108,0

5,00127,0

4 0,7519,1

6,00152,4

8,53,85

3 1/2” 4,00101,6

8,50215,9

4,07103,4

0,9423,9

1,2531,8

4,81122,2

5,50139,7

8 0,7519,1

7,00177,8

10,64,81

4” 4,50114,3

9,00228,6

4,57116,1

0,9423,9

1,3133,3

5,31134,9

6,19157,2

8 0,7519,1

7,50190,5

11,75,30

5” 5,563141,3

10,00254,0

5,66143,8

0,9423,9

1,4436,6

6,44163,6

7,31185,7

8 0,8822,4

8,50215,9

13,46,07

6” 6,625168,3

11,00279,4

6,72170,7

1,0025,4

1,5639,6

7,56192,0

8,50215,9

8 0,8822,4

9,50241,3

16,47,45

8” 8,625219,1

13,50342,9

8,72221,5

1,1228,4

1,7544,5

9,69246,1

10,62269,7

8 0,8822,4

11,75298,5

26,712,1

10” 10,75273

16,00406,4

10,88276,4

1,1930,2

1,9449,3

12,00304,8

12,75323,9

12 1,0025,4

14,25362,0

36,316,5

12” 12,75323,8

19,00482,6

12,88327,2

1,2531,8

2,1955,6

14,38365,3

15,00381,0

12 1,0025,4

17,00431,8

57,726,2

14” 14,0355,6

21,00533,4

14,14359,2

1,3835,1

2,2557,2

15,75400,1

16,25412,8

12 1,1228,4

18,75476,3

76,234,6

16” 16,0406,4

23,50596,9

16,16410,5

1,4436,6

2,5063,5

18,00457,2

18,50469,9

16 1,1228,4

21,25539,8

98,744,8

18” 18,0457,2

25,00635,0

18,18461,8

1,5639,6

2,6968,3

19,88505,0

21,00533,4

16 1,2531,8

22,75577,9

10848,9

20” 20,0508

27,50698,5

20,20513,1

1,6942,9

2,8873,2

22,00558,8

23,00584,2

20 1,2531,8

25,00635,0

13661,9

24”24,0

609,632,00812,8

24,25616,0

1,8847,8

3,2582,6

26,12663,4

27,25692,2

20 1,3835,1

29,50749,3

19186,9

150 lb/sq. in.

Geçme göbekli flanşlarSlip–on flanges

ANSI B 16.5

mJ

g

b

0.06 ” = (1,6 mm)

IØ

kD

h

44

Boru Pipe

FlanşFlange

Göbek Hub

AlınRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,8822,4

0,5614,2

0,8822,4

1,5038,1

1,3835,1

4 0,6215,7

2,6266,5

1,40,64

3/4” 1,0526,7

4,62117,3

1,0927,7

0,6215,7

1,0025,4

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,51,12

1” 1,31533,4

4,88123,9

1,3634,5

0,6917,5

1,0626,9

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,01,36

1 1/4” 1,6642,2

5,25133,4

1,7043,2

0,7519,1

1,0626,9

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

3,71,68

1 1/2” 1,9048,3

6,12155,4

1,9549,5

0,8120,6

1,1930,2

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

5,52,49

2” 2,37560,3

6,50165,1

2,4462,0

0,8822,4

1,3133,3

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

6,32,87

2 1/2” 2,87573,0

7,50190,5

2,9474,7

1,0025,4

1,5038,1

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

9,54,32

3” 3,5088,9

8,25209,6

3,5790,7

1,1228,4

1,6942,9

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

12,95,85

3 1/2” 4,00101,6

9,00228,6

4,07103,4

1,1930,2

1,7544,5

5,25133,4

5,50139,7

8 0,8822,4

7,25184,2

16,27,34

4” 4,50114,3

10,00254,0

4,57116,1

1,2531,8

1,8847,8

5,75146,1

6,19157,2

8 0,8822,4

7,88200,2

21,29,61

5” 5,563141,3

11,00279,4

5,66143,8

1,3835,1

2,0050,8

7,00177,8

7,31185,7

8 0,8822,4

9,25235

27,112,3

6” 6,625168,3

12,50317,5

6,72170,7

1,4436,6

2,0652,3

8,12206,2

8,50215,9

12 0,8822,4

10,62269,7

34,415,6

8” 8,625219,1

15,00381,0

8,72221,5

1,6241,1

2,4462

10,25260,4

10,62269,7

12 1,0025,4

13,00330,2

53,324,2

10” 10,75273

17,50444,5

10,88276,4

1,8847,8

2,6266,5

12,62320,5

12,75323,9

16 1,1228,4

15,25387,4

75,134,1

12” 12,75323,8

20,50520,7

12,88327,2

2,0050,8

2,8873,2

14,75374,7

15,00381,0

16 1,2531,8

17,75450,9

11049,8

14” 14,0355,6

23,00584,2

14,14359,2

2,1253,8

3,0076,2

16,75425,5

16,25412,8

20 1,2531,8

20,25514,4

15469,9

16” 16,0406,4

25,50647,7

16,16410,5

2,2557,2

3,2582,6

19,00482,6

18,50469,9

20 1,3835,1

22,50571,5

19488,1

18” 18,0457,2

28,00711,2

18,18461,8

2,3860,5

3,5088,9

21,00533,4

21,00533,4

24 1,3835,1

24,75628,7

240109

20” 20,0508

30,50774,7

20,20513,1

2,5063,5

3,7595,3

23,12587,2

23,00584,2

24 1,3835,1

27,00685,8

295134

24” 24,0609,6

36,00914,4

24,25616,0

2,7569,9

4,19106,4

27,62701,5

27,25692,2

24 1,6241,1

32,00812,8

443201

300 lb/sq. in.


ANSI B 16.5

mJ

g

b

0.06 ” = (1,6 mm)

IØ

kD

h

45

Boru Pipe

FlanşFlange

Göbek Hub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

3 1/2” 4,00101,6

4” 4,50114,3

10,00254,0

4,57116,1

1,3835,1

2,0050,8

5,75146,1

6,19157,2

8 1,0025,4

7,88200,2

24,411,1

5” 5,563141,3

11,00279,4

5,66143,8

1,5038,1

2,1253,8

7,00177,8

7,31185,7

8 1,0025,4

9,25235,0

30,613,9

6” 6,625168,3

12,50317,5

6,72170,7

1,6241,1

2,2557,2

8,12206,2

8,50215,9

12 1,0025,4

10,62269,7

40,318,3

8” 8,625219,1

15,00381,0

8,72221,5

1,8847,8

2,6968,3

10,25260,4

10,62269,7

12 1,1228,4

13,00330,2

63,028,6

10” 10,75273

17,50444,5

10,88276,4

2,1253,8

2,8873,2

12,62320,5

12,75323,9

16 1,2531,8

15,25387,4

86,339,2

12” 12,75323,8

20,50520,7

12,88327,2

2,2557,2

3,1279,2

14,75374,7

15,00381,0

16 1,3835,1

17,75450,9

12657,0

14” 14,0355,6

23,00584,2

14,14359,2

2,3860,5

3,3184,1

16,75425,5

16,25412,8

20 1,3835,1

20,25514,4

17479,1

16” 16,0406,4

25,50647,7

16,16410,5

2,5063,5

3,6993,7

19,00482,6

18,50469,9

20 1,5038,1

22,50571,5

223101

18” 18,0457,2

28,00711,2

18,18461,8

2,6266,5

3,8898,6

21,00533,4

21,00533,4

24 1,5038,1

24,75628,7

271123

20” 20,0508

30,50774,7

20,20513,1

2,7569,9

4,00101,6

23,12587,2

23,00584,2

24 1,6241,1

27,00685,8

322146

24”24,0

609,636,00914,4

24,25616,0

3,0076,2

4,50114,3

27,62701,5

27,25692,2

24 1,8847,8

32,00812,8

482219

Bu ölçüler için Sınıf 600 ün boyutlarını kullanınızUse 600 lb dimensions for these sizes

400 lb/sq.in.


ANSI B 16.5

mJ

g

b

0.25” = (6,4 mm)

IØ

kD

h

46

Boru Pipe

FlanşFlange

Göbek Hub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,8822,4

0,5614,2

0,8822,4

1,5038,1

1,3835,1

4 0,6215,7

2,6266,5

1,60,74

3/4” 1,0526,7

4,62117,3

1,0927,7

0,6215,7

1,0025,4

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,81,27

1” 1,31533,4

4,88124,0

1,3634,5

0,6917,5

1,0626,9

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,31,52

1 1/4” 1,6642,2

5,25133,4

1,7043,2

0,8120,6

1,1228,4

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

4,52,03

1 1/2” 1,9048,3

6,12155,4

1,9549,5

0,8822,4

1,2531,8

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

6,52,96

2” 2,37560,3

6,50165,1

2,4462,0

1,0025,4

1,4436,6

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

8,03,62

2 1/2” 2,87573,0

7,50190,5

2,9474,7

1,1228,4

1,6241,1

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

11,65,28

3” 3,5088,9

8,25209,6

3,5790,7

1,2531,8

1,8146,0

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

15,47,00

3 1/2” 4,00101,6

9,00228,6

4,07103,4

1,3835,1

1,9449,3

5,25133,4

5,50139,7

8 1,0025,4

7,25184,2

19,58,84

4” 4,50114,3

10,75273,1

4,57116,1

1,5038,1

2,1253,8

6,00152,4

6,19157,2

8 1,0025,4

8,50215,9

31,914,5

5” 5,563141,3

13,00330,2

5,66143,8

1,7544,5

2,3860,5

7,44189,0

7,31185,7

8 1,1228,4

10,50266,7

53,724,4

6” 6,625168,3

14,00355,6

6,72170,7

1,8847,8

2,6266,5

8,75222,3

8,50215,9

12 1,1228,4

11,50292,1

63,228,7

8” 8,625219,1

16,50419,1

8,72221,5

2,1955,6

3,0076,2

10,75273,1

10,62269,7

12 1,2531,8

13,75349,3

95,643,4

10” 10,75273

20,00508,0

10,88276,4

2,5063,5

3,3885,9

13,50342,9

12,75323,9

16 1,3835,1

17,00431,8

15570,3

12” 12,75323,8

22,00558,8

12,88327,2

2,6266,5

3,6291,9

15,75400,1

15,00381,0

20 1,3835,1

19,25489,0

18684,2

14” 14,0355,6

23,75603,3

14,14359,2

2,7569,9

3,6993,7

17,00431,8

16,25412,8

20 1,5038,1

20,75527,1

21798,7

16” 16,0406,4

27,00685,8

16,16410,5

3,0076,2

4,19106,4

19,50495,3

18,50469,9

20 1,6241,1

23,75603,3

313142

18” 18,0457,2

29,25743,0

18,18461,8

3,2582,6

4,62117,3

21,50546,1

21,00533,4

20 1,7544,5

25,75654,1

381173

20” 20,0508

32,00812,8

20,20513,1

3,5088,9

5,00127,0

24,00609,6

23,00584,2

24 1,7544,5

28,50723,9

485220

24” 24,0609,6

37,00939,8

24,25616,0

4,00101,6

5,50139,7

28,25717,6

27,25692,2

24 2,0050,8

33,00838,2

687312

600 lb/sq.in.


ANSI B 16.5

mJ

g

b

0.25” = (6,4 mm)

IØ

kD

h

47

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

9,50241,3

3,5790,7

1,5038,1

2,1253,8

5,00127,0

5,00127,0

8 1,0025,4

7,50190,5

25,611,6

4” 4,50114,3

11,50292,1

4,57116,1

1,7544,4

2,7569,9

6,25158,8

6,19157,2

8 1,2531,8

9,25235

43,419,7

5” 5,563141,3

13,75349,3

5,66143,8

2,0050,8

3,1279,2

7,50190,5

7,31185,7

8 1,3835,1

11,00279,4

70,331,9

6” 6,625168,3

15,00381,0

6,72170,7

2,1955,6

3,3885,9

9,25235

8,50215,9

12 1,2531,8

12,50317,5

90,541,1

8” 8,625219,1

18,50469,9

8,72221,5

2,5063,5

4,00101,6

11,75298,5

10,62269,8

12 1,5038,1

15,50393,7

15670,7

10” 10,75273

21,50546,1

10,88276,4

2,7569,9

4,25107,9

14,50368,3

12,75323,8

16 1,5038,1

18,50469,9

223101

12” 12,75323,8

24,00609,6

12,88327,2

3,1279,2

4,62117,3

16,50419,1

15,00381,0

20 1,5038,1

21,00533,4

293133

14” 14,0355,6

25,25641,4

14,14359,2

3,3885,9

5,12130,0

17,75450,9

16,25412,8

20 1,6241,1

22,00558,8

337153

16” 16,0406,4

27,75704,9

16,16410,5

3,5088,9

5,25133,4

20,00508,0

18,50469,9

20 1,7544,5

24,25616

408185

18” 18,0457,2

31,00787,4

18,18461,8

4,00101,6

6,00152,4

25,25565,2

21,00533,4

20 2,0050,8

27,00685,8

568258

20” 20,0508

33,75857,3

20,20513,1

4,25108,0

6,25158,8

24,50622,3

23,00584,2

20 2,1253,8

29,50749,3

698317

24”

24,0609,6

41,001041,4

24,25616

5,50139,7

8,00203,2

29,50749,3

27,25692,2

20 2,6266,5

35,50901,7

1335606

Bu ölçüler çin Sınıf 1500 ün boyutlarını kullanınızUse 1500 lb dimensions for these sizes

900 lb/sq.in.


ANSI B 16.5

mJ

g

b

0.25” = (6,4 mm)

IØ

kD

h

48

Boru Pipe

FlanşFlange

GöbekHub

FaturaRaised

Face



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

4,75120,7

0,8822,4

0,8822,4

1,2531,8

1,5038,1

1,3835,1

4 0,8822,4

3,2582,6

3,81,74

3/4” 1,0526,7

5,12130,0

1,0927,7

1,0025,4

1,3835,1

1,7544,5

1,6942,9

4 0,8822,4

3,5088,9

5,22,34

1” 1,31533,4

5,88149,4

1,3634,5

1,1228,4

1,6241,1

2,0652,3

2,0050,8

4 1,0025,4

4,00101,6

7,63,44

1 1/4” 1,6642,2

6,25158,7

1,7043,2

1,1228,4

1,6241,1

2,5063,5

2,5063,5

4 1,0025,4

4,38111,3

8,63,91

1 1/2” 1,9048,3

7,00177,8

1,9549,5

1,2531,8

1,7544,5

2,7569,9

2,8873,2

4 1,1228,4

4,88124

11,85,36

2” 2,37560,3

8,50215,9

2,4462,0

1,5038,1

2,2557,2

4,12104,6

3,6291,9

8 1,0025,4

6,50165,1

21,79,85

2 1/2” 2,87573,0

9,62244,3

2,9474,7

1,6241,1

2,5063,5

4,88124

4,12104,6

8 1,1228,4

7,50190,5

30,213,7

1500 lb/sq.in.


ANSI B 16.5

mJ

g

b

0.25” = (6,4 mm)

IØ

kD

h

49

Boru Pipe

FlanşFlange

Göbek Hub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,5088,9

0,9022,9

0,4411,2

0,6215,7

0,123,0

1,1930,2

4 0,6215,7

2,3860,5

0,80,38

3/4” 1,0526,7

3,8898,6

1,1128,2

0,5012,7

0,6215,7

0,123,0

1,5038,1

4 0,6215,7

2,7569,9

1,20,55

1” 1,31533,4

4,25108,0

1,3835,1

0,5614,2

0,6917,5

0,123,0

1,9449,3

4 0,6215,7

3,1279,2

1,70,76

1 1/4” 1,6642,2

4,62117,3

1,7243,7

0,6215,7

0,8120,6

0,194,8

2,3158,7

4 0,6215,7

3,5088,9

2,21,01

1 1/2” 1,9048,3

5,00127,0

1,9750,0

0,6917,5

0,8822,4

0,256,4

2,5665,0

4 0,6215,7

3,8898,6

2,91,30

2” 2,37560,3

6,00152,4

2,4662,5

0,7519,1

1,0025,4

0,317,9

3,0677,7

4 0,7519,1

4,75120,7

4,52,03

2 1/2” 2,87573,0

7,00177,8

2,9775,4

0,8822,4

1,1228,4

0,317,9

3,5690,4

4 0,7519,1

5,50139,7

7,23,25

3” 3,5088,9

7,50190,5

3,6091,4

0,9423,9

1,1930,2

0,389,7

4,25108,0

4 0,7519,1

6,00152,4

8,43,81

3 1/2” 4,00101,6

8,50215,9

4,10104,1

0,9423,9

1,2531,8

0,389,7

4,81122,2

8 0,7519,1

6,00152,4

8,43,81

4” 4,50114,3

9,00228,6

4,60116,8

0,9423,9

1,3133,3

0,4411,2

5,31134,9

8 0,7519,1

7,50190,5

11,65,25

5” 5,563141,3

10,00254,0

5,69144,5

0,9423,9

1,4436,6

0,4411,2

6,44163,6

8 0,8822,4

8,50215,9

13,36,02

6” 6,625168,3

11,00279,4

6,75171,5

1,0025,4

1,5639,6

0,5012,7

7,56192,0

8 0,8822,4

9,50241,3

16,37,40

8” 8,625219,1

13,50342,9

8,75222,3

1,1228,4

1,7544,5

0,5012,7

9,69246,1

8 0,8822,4

11,75298,5

26,712,1

10” 10,75273

16,00406,4

10,92277,4

1,1930,2

1,9449,3

0,5012,7

12,00304,8

12 1,0025,4

14,25362,0

36,116,4

12” 12,75323,8

19,00482,6

12,92328,2

1,2531,8

2,1955,6

0,5012,7

14,38365,3

12 1,0025,4

17,00431,8

57,526,1

14” 14,0355,6

21,00533,4

14,18360,2

1,3835,1

3,1279,2

0,5012,7

15,75400,1

12 1,1228,4

18,75476,3

76,034,5

16” 16,0406,4

23,50596,9

16,19411,2

1,4436,6

3,4487,4

0,5012,7

18,00457,2

16 1,1228,4

21,25539,8

98,244,6

18” 18,0457,2

25,00635,0

18,20462,3

1,5639,6

3,8196,8

0,5012,7

19,88505,0

16 1,2531,8

22,75577,9

10748,7

20” 20,0508

27,50698,5

20,25514,4

1,6942,9

4,06103,1

0,5012,7

22,00558,8

20 1,2531,8

25,00635,0

13661,6

24”24,0

609,632,00812,8

24,25616,0

1,8847,8

4,38111,3

0,5012,7

26,12663,4

20 1,3835,1

29,50749,3

19186,6

150 lb/sq. in.


ANSI B 16.5

m

J

h b

kD

r

I Ø

50

300 lb/sq. in.


ANSI B 16.5

Boru Pipe

FlanşFlange

GöbekHub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,9022,9

0,5614,2

0,8822,4

0,123,0

1,5038,1

4 0,6215,7

2,6266,6

1,40,62

3/4” 1,0526,7

4,62117,3

1,1128,2

0,6215,7

1,0025,4

0,123,0

1,8847,8

4 0,7519,1

3,2582,6

2,41,10

1” 1,31533,4

4,88124

1,3835,1

0,6917,5

1,0626,9

0,123,0

2,1253,8

4 0,7519,1

3,5088,9

2,91,33

1 1/4” 1,6642,2

5,25133,4

1,7243,7

0,7519,1

1,0626,9

0,194,8

2,5063,5

4 0,7519,1

3,8898,6

3,61,65

1 1/2” 1,9048,3

6,12155,4

1,9750,0

0,8120,6

1,1930,2

0,256,4

2,7569,9

4 0,8822,4

4,50114,3

5,42,44

2” 2,37560,3

6,50165,1

2,4662,5

0,8822,4

1,3133,3

0,317,9

3,3184,1

8 0,7519,1

5,00127,0

6,22,83

2 1/2” 2,87573,0

7,50190,5

2,9775,4

1,0025,4

1,5038,1

0,317,9

3,94100,1

8 0,8822,4

5,88149,4

9,44,25

3” 3,5088,9

8,25209,6

3,6091,4

1,1228,4

1,6942,9

0,389,7

4,62117,3

8 0,8822,4

6,62168,1

12,75,78

3 1/2” 4,00101,6

9,00228,6

4,10104,1

1,1930,2

1,7544,5

0,389,7

5,25133,4

8 0,8822,4

7,25184,2

16,07,27

4” 4,50114,3

10,00254,0

4,60116,8

1,2531,8

1,8847,8

0,4411,2

5,75146,1

8 0,8822,4

7,88200,2

21,09,55

5” 5,563141,3

11,00279,4

5,69144,5

1,3835,1

2,0050,8

0,4411,2

7,00177,8

8 0,8822,4

9,25235

26,912,2

6” 6,625168,3

12,50317,5

6,75171,5

1,4436,6

2,0652,3

0,5012,7

8,12206,2

12 0,8822,4

10,62269,7

34,115,5

8” 8,625219,1

15,00381,0

8,75222,3

1,6241,1

2,4462

0,5012,7

10,25260,4

12 1,0025,4

13,00330,2

53,124,1

10” 10,75273

17,50444,5

10,92277,4

1,8847,8

3,7595,3

0,5012,7

12,62320,5

16 1,1228,4

15,25387,4

75,834,4

12” 12,75323,8

20,50520,7

12,92328,2

2,0050,8

4,00101,6

0,5012,7

14,75374,7

16 1,2531,8

17,75450,9

11150,4

14” 14,0355,6

23,00584,2

14,18360,2

2,1253,8

4,38111,3

0,5012,7

16,75425,5

20 1,2531,8

20,25514,3

15670,9

16” 16,0406,4

25,50647,7

16,19411,2

2,2557,2

4,75120,7

0,5012,7

19,00482,6

20 1,3835,1

22,50571,5

19789,5

18” 18,0457,2

28,00711,2

18,20462,3

2,3860,5

5,12130,0

0,5012,7

21,00533,4

24 1,3835,1

24,75628,7

245111

20” 20,0508

30,50774,7

20,25514,4

2,5063,5

5,50139,7

0,5012,7

23,12587,2

24 1,3835,1

27,00685,8

302137

24”24,0

609,636,00914,4

24,25616,0

2,7569,9

6,00152,4

0,5012,7

27,62701,5

24 1,6241,1

32,00812,8

449204

m

J

h b

kD

r

I Ø

51

Boru Pipe

FlanşFlange

GöbekHub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

3 1/2” 4,00101,6

4” 4,50114,3

10,00254,0

4,60116,8

1,3835,1

2,0050,8

0,4411,2

5,75146,1

8 1,0025,4

7,88200,2

24,010,9

5” 5,563141,3

11,00279,4

5,69144,5

1,5038,1

2,1253,8

0,4411,2

7,00177,8

8 1,0025,4

9,25235,0

30,213,7

6” 6,625168,3

12,50317,5

6,75171,5

1,6241,1

2,2557,2

0,5012,7

8,12206,2

12 1,0025,4

10,62269,7

39,618,0

8” 8,625219,1

15,00381,0

8,75222,3

1,8847,8

2,6968,3

0,5012,7

10,25260,4

12 1,1228,4

13,00330,2

62,328,3

10” 10,75273

17,50444,5

10,92277,4

2,1253,8

4,00101,6

0,5012,7

12,62320,5

16 1,2531,8

15,25387,4

85,538,8

12” 12,75323,8

20,50520,7

12,92328,2

2,2557,2

4,25108,0

0,5012,7

14,75374,7

16 1,3835,1

17,75450,9

12556,6

14” 14,0355,6

23,00584,2

14,18360,2

2,3860,5

4,62117,3

0,5012,7

16,75425,5

20 1,3835,1

20,25514,4

17378,6

16” 16,0406,4

25,50647,7

16,19411,2

2,5063,5

5,00127,0

0,5012,7

19,00482,6

20 1,5038,1

22,50571,5

220110

18” 18,0457,2

28,00711,2

18,20462,3

2,6266,5

5,38136,7

0,5012,7

21,00533,4

24 1,5038,1

24,75628,7

269122

20” 20,0508

30,50774,7

20,25514,4

2,7569,9

5,75146,1

0,5012,7

23,12587,2

24 1,6241,1

27,00685,8

319145

24”24,0

609,636,00914,4

24,25616,0

3,0076,2

6,25158,8

0,5012,7

27,62701,5

24 1,8847,8

32,00812,8

478217


400 lb/sq. in.


ANSI B 16.5

m

J

h b

kD

r

I Ø

52

Boru Pipe

FlanşFlange

GöbekHub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,9022,9

0,5614,2

0,8822,4

0,123,0

1,5038,1

4 0,6215,7

2,6266,5

1,60,72

3/4” 1,0526,7

4,62117,3

1,1128,2

0,6215,7

1,0025,4

0,123,0

1,8647,8

4 0,7519,1

3,2582,6

2,81,25

1” 1,31533,4

4,88124,0

1,3835,1

0,6917,5

1,0626,9

0,123,0

2,1253,8

4 0,7519,1

3,5088,9

3,31,50

1 1/4” 1,6642,2

5,25133,4

1,7243,7

0,8120,6

1,1228,4

0,194,8

2,5063,5

4 0,7519,1

3,8898,6

4,42,00

1 1/2” 1,9048,3

6,12155,4

1,9750,0

0,8822,4

1,2531,8

0,256,4

2,7569,9

4 0,8822,4

4,50114,3

6,42,92

2” 2,37560,3

6,50165,1

2,4662,5

1,0025,4

1,4436,6

0,317,9

3,3184,1

8 0,7519,1

5,00127,0

7,83,55

2 1/2” 2,87573,0

7,50190,5

2,9775,4

1,1228,4

1,6241,1

0,317,9

3,94100,1

8 0,8822,4

5,88149,4

11,55,23

3” 3,5088,9

8,25209,6

3,6091,4

1,2531,8

1,8146,0

0,389,7

4,62117,3

8 0,8822,4

6,62168,1

15,36,95

3 1/2” 4,00101,6

9,00228,6

4,10104,1

1,3835,1

1,9449,3

0,389,7

5,25133,4

8 1,0025,4

7,25184,2

19,38,78

4” 4,50114,3

10,75273,1

4,60116,8

1,5038,1

2,1253,8

0,4411,2

6,00152,4

8 1,0025,4

8,50215,9

31,714,4

5” 5,563141,3

13,00330,2

5,69144,5

1,7544,5

2,3860,5

0,4411,2

7,44189,0

8 1,1228,4

10,50266,7

53,524,3

6” 6,625168,3

14,00355,6

6,75171,5

1,8847,8

2,6266,5

0,5012,7

8,75222,3

12 1,1228,4

11,50292,1

62,828,5

8” 8,625219,1

16,50419,1

8,75222,3

2,1955,6

3,0076,2

0,5012,7

10,75273,1

12 1,2531,8

13,75349,3

94,943,1

10” 10,75273

20,00508,0

10,92277,4

2,5063,5

4,38111,3

0,5012,7

13,50342,9

16 1,3835,1

17,00431,8

15570,5

12” 12,75323,8

22,00558,8

12,92328,2

2,6266,5

4,62117,3

0,5012,7

15,75400,1

20 1,3835,1

19,25489,0

19086,1

14” 14,0355,6

23,75603,3

14,18360,2

2,7569,9

5,00127,0

0,5012,7

17,00431,8

20 1,5038,1

20,75527,1

220100

16” 16,0406,4

27,00685,8

16,19411,2

3,0076,2

5,50139,7

0,5012,7

19,50495,3

20 1,6241,1

23,75603,3

319145

18” 18,0457,2

29,25743,0

18,20462,3

3,2582,6

6,00152,4

0,5012,7

21,50546,1

20 1,7544,5

25,75654,1

390177

20” 20,0508

32,00812,8

20,25514,4

3,5088,9

6,50165,1

0,5012,7

24,00609,6

24 1,7544,5

28,50723,9

496225

24”24,0

609,637,00939,8

24,25616,0

4,00101,6

7,25184,2

0,5012,7

28,25717,6

24 2,0050,8

33,00838,2

700318

600 lb/sq. in.


ANSI B 16.5

m

J

h b

kD

r

I Ø

53

Boru Pipe

FlanşFlange

GöbekHub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

9,50241,3

3,6091,4

1,5038,1

2,1253,8

0,389,7

5,00127,0

8 1,0025,4

7,50190,5

24,911,3

4” 4,50114,3

11,50292,1

4,60116,8

1,7544,5

2,7569,9

0,4411,2

6,25158,8

8 1,2531,8

9,25235

42,319,2

5” 5,563141,3

13,75349,3

5,69144,5

2,0050,8

3,1279,2

0,4411,2

7,50190,5

8 1,3835,1

11,00279,4

68,731,2

6” 6,625168,3

15,00381,0

6,75171,5

2,1955,6

3,3885,9

0,5012,7

9,25235

12 1,2531,8

12,50317,5

89,240,5

8” 8,625219,1

18,50469,9

8,75222,2

2,5063,5

4,50114,3

0,5012,7

11,75298,5

12 1,5038,1

15,50393,7

15871,5

10” 10,75273

21,50546,1

10,92277,4

2,7569,9

5,00127,0

0,5012,7

14,50368,3

16 1,5038,1

18,50469,9

229104

12” 12,75323,8

24,00609,6

12,92328,2

3,1279,2

5,62142,7

0,5012,7

16,50419,1

20 1,5038,1

21,00533,4

306139

14” 14,0355,6

25,25641,3

14,18360,2

3,3885,9

6,12155,4

0,5012,7

17,75450,9

20 1,6241,1

22,00558,8

355161

16” 16,0406,4

27,75704,9

16,19411,2

3,5088,9

6,50165,1

0,5012,7

20,00508,0

20 1,7544,5

24,25616

427194

18” 18,0457,2

31,00787,4

18,20462,3

4,00101,6

7,50190,5

0,5012,7

22,25565,2

20 2,0050,8

27,00685,8

588267

20” 20,0508

33,75857,3

20,25514,4

4,25108

8,25209,8

0,5012,7

24,50622,3

20 2,1253,8

29,50749,3

736334

24” 24,0609,6

41,001041,4

24,25616

5,50139,7

10,50266,7

0,5012,7

29,50749,3

20 2,6266,5

35,50901,7

1361618


900 lb/sq. in.


ANSI B 16.5

m

J

h b

kD

r

I Ø

54

Boru Pipe

FlanşFlange

GöbekHub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

4,75120,7

0,9022,9

0,8822,4

1,2531,8

0,123,0

1,5038,1

4 0,8822,4

3,2582,6

3,81,71

3/4” 1,0526,7

5,12130,0

1,1128,2

1,0025,4

1,3835,1

0,123,0

1,7544,5

4 0,8822,4

3,5088,9

5,12,30

1” 1,31533,4

5,88149,4

1,3835,1

1,1228,4

1,6241,1

0,123,0

2,0652,3

4 1,0025,4

4,00101,6

7,53,40

1 1/4” 1,6642,2

6,25158,8

1,7243,7

1,1228,4

1,6241,1

0,194,8

2,5063,5

4 1,0025,4

4,38111,3

8,53,85

1 1/2” 1,9048,3

7,00177,8

1,9750,0

1,2531,8

1,7544,5

0,256,4

2,7569,9

4 1,1228,4

4,88124

11,65,28

2” 2,37560,3

8,50215,9

2,4662,5

1,5038,1

2,2557,2

0,317,9

4,12104,6

8 1,0025,4

6,50165,1

21,59,78

2 1/2” 2,87573,0

9,62244,3

2,9775,4

1,6241,1

2,5063,5

0,317,9

4,88124

8 1,1228,4

7,50190,5

30,013,6

3” 3,5088,9

10,50266,7

3,6091,4

1,8847,8

2,8873,2

0,389,7

5,25133,4

8 1,2531,8

8,00203,2

39,217,8

4” 4,50114,3

12,25311,2

4,60116,8

2,1253,8

3,5690,4

0,4411,2

6,38162,1

8 1,3835,1

9,50241,3

60,627,5

5” 5,563141,3

14,75374,7

5,69144,5

2,8873,2

4,12104,6

0,4411,2

7,75196,9

8 1,6241,1

11,50292,1

11351,5

6” 6,625168,3

15,50393,7

6,75171,5

3,2582,6

4,69119,1

0,5012,7

9,00228,6

12 1,5038,1

12,50317,5

13762,0

8” 8,625219,1

19,00482,6

8,75222,3

3,6291,9

5,62142,7

0,5012,7

11,50292,1

12 1,7544,5

15,50393,7

231105

10” 10,75273

23,00584,2

10,92277,4

4,25108

7,00177,8

0,5012,7

14,50368,3

12 2,0050,8

19,00482,6

304179

12” 12,75323,8

26,50673,1

12,92328,2

4,88124

8,62218,9

0,5012,7

17,75450,9

16 2,1253,8

22,50571,5

593269

14” 14,0355,6

29,50749,3

14,18360,2

5,25133,4

9,50241,3

0,5012,7

19,50495,3

16 2,3860,5

25,00635,0

804365

16” 16,0406,4

32,50825,5

16,19411,2

5,75146,1

10,25260,4

0,5012,7

21,75552,5

16 2,6266,5

27,75704,9

1011459

18” 18,0457,2

36,00914,4

18,20462,3

6,38162,1

10,88276,4

0,5012,7

23,50596,9

16 2,8873,2

30,50774,7

1317598

20” 20,0508

38,75984,3

20,25514,4

7,00177,8

11,50292,1

0,5012,7

25,25641,4

16 3,1279,2

32,75831,9

1568712

24” 24,0609,6

46,001168,4

24,25616

8,00203,2

13,00330,2

0,5012,7

30,00762,0

16 3,6291,9

39,00990,6

24011090

1500 lb/sq. in.


ANSI B 16.5

m

J

h b

kD

r

I Ø

55

Boru Pipe

FlanşFlange

GöbekHub



Nom.SizeDN

DışÇap

ODmm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

rin.

mm

min.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

5,25133,4

0,9022,9

1,1930,2

1,5639,6

0,123,0

1,6942,9

4 0,8822,4

3,5088,9

6,42,92

3/4” 1,0526,7

5,50139,7

1,1128,2

1,2531,8

1,6942,9

0,123,0

2,0050,8

4 0,8822,4

3,7595,3

7,53,40

1” 1,31533,4

6,25158,8

1,3835,1

1,3835,1

1,8847,8

0,123,0

2,2557,2

4 1,0025,4

4,25108,0

10,54,77

1 1/4” 1,6642,2

7,25184,2

1,7243,7

1,5038,1

2,0652,3

0,194,8

2,8873,2

4 1,1228,4

5,12130,0

15,67,08

1 1/2” 1,9048,3

8,00203,2

1,9750,0

1,7544,5

2,3860,5

0,256,4

3,1279,2

4 1,2531,8

5,75146,1

21,99,93

2” 2,37560,3

9,25235,0

2,4662,5

2,0050,8

2,7569,9

0,317,9

3,7595,3

8 1,1228,4

6,75171,5

32,414,7

2 1/2” 2,87573,0

10,50266,7

2,9775,4

2,2557,2

3,1279,2

0,317,9

4,50114,3

8 1,2531,8

7,75196,9

46,921,3

3” 3,5088,9

12,00304,8

3,6091,4

2,6266,5

3,6291,9

0,389,7

5,25133,4

8 1,3835,1

9,00228,6

71,132,3

4” 4,50114,3

14,00355,6

4,60116,8

3,0076,2

4,25108,0

0,4411,2

6,50165,1

8 1,6241,1

10,75273,1

11652,5

5” 5,563141,3

16,50419,1

5,69144,5

3,6291,9

5,12130,0

0,4411,2

8,00203,2

8 1,8847,8

12,75323,9

18282,6

6” 6,625168,3

19,00482,6

6,75171,5

4,25108,0

6,00152,4

0,5012,7

9,25235,0

8 2,1253,8

14,50368,3

280127

8” 8,625219,1

21,75552,5

8,75222,3

5,00127,0

7,00177,8

0,5012,7

12,00304,8

12 2,1253,8

17,25438,3

410186

10” 10,75273

26,50673,1

10,92277,4

6,50165,1

9,00228,6

0,5012,7

14,75374,7

12 2,6266,5

21,25539,8

775352

12” 12,75323,8

30,00762,0

12,92328,2

7,25184,2

10,00254,0

0,5012,7

17,38441,5

12 2,8873,2

24,38619,3

1104501

2500 lb/sq. in.


m

J

h b

kD

r

I Ø

56

Boru Pipe

FlanşFlange

Fatura Raised Face



Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm

Civata sayısıNumber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,5088,9

0,4411,2

1,3835,1

4 0,6215,7

2,3860,5

0,90,42

3/4” 1,0526,7

3,8898,6

0,5012,7

1,6942,9

4 0,6215,7

2,7569,9

1,30,61

1” 1,31533,4

4,25108,0

0,5614,2

2,0050,8

4 0,6215,7

3,1279,2

1,90,86

1 1/4” 1,6642,2

4,62117,3

0,6215,7

2,5063,5

4 0,6215,7

3,5088,9

2,61,17

1 1/2” 1,9048,3

5,00127,0

0,6917,5

2,8873,2

4 0,6215,7

3,8898,6

3,41,53

2” 2,37560,3

6,00152,4

0,7519,1

3,6291,9

4 0,7519,1

4,75120,7

5,32,42

2 1/2” 2,87573,0

7,00177,8

0,8822,4

4,12104,6

4 0,7519,1

5,50139,7

8,73,94

3” 3,5088,9

7,50190,5

0,9423,9

5,00127,0

4 0,7519,1

6,00152,4

10,94,93

3 1/2” 4,00101,6

8,50215,9

0,9423,9

5,50139,7

8 0,7519,1

7,00177,8

13,66,17

4” 4,50114,3

9,00228,6

0,9423,9

6,19157,2

8 0,7519,1

7,50190,5

15,47,00

5” 5,563141,3

10,00254,0

0,9423,9

7,31185,7

8 0,8822,4

8,50215,9

19,08,63

6” 6,625168,3

11,00279,4

1,0025,4

8,50215,9

8 0,8822,4

9,50241,3

24,911,3

8” 8,625219,1

13,50342,9

1,1228,4

10,62269,7

8 0,8822,4

11,75298,5

43,219,6

10” 10,75273

16,00406,4

1,1930,2

12,75323,8

12 1,0025,4

14,25362,0

63,428,8

12” 12,75323,8

19,00482,6

1,2531,8

15,00381,0

12 1,0025,4

17,00431,8

95,243,2

14” 14,0355,6

21,00533,4

1,3835,1

16,25412,8

12 1,1228,4

18,75476,3

12858,1

16” 16,0406,4

23,50596,9

1,4436,6

18,50469,9

16 1,1228,4

21,25539,8

16776,0

18” 18,0457,2

25,00635,0

1,5639,6

21,00533,4

16 1,2531,8

22,75577,9

20693,7

20” 20,0508

27,50698,5

1,6942,9

23,00584,2

20 1,2531,8

25,00635,0

269122

24”24,0

609,632,00812,8

1,8847,8

27,25692,2

20 1,3835,1

29,50749,3

408185

b

g

DI Ø

k0.06"= (1,6mm)

ANSI B 16.5

150 lb/sq. in.


57

Boru Pipe

FlanşFlange

Fatura Raised Face



Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm


Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,2

0,5614,2

1,3835,1

4 0,6215,7

2,6266,6

1,40,64

3/4” 1,0526,7

4,62117,3

0,6215,8

1,6942,9

4 0,7519,1

3,2582,6

2,41,11

1” 1,31533,4

4,88124

0,6917,5

2,0050,8

4 0,7519,1

3,5088,9

3,11,39

1 1/4” 1,6642,2

5,25133,4

0,7519,1

2,5063,5

4 0,7519,1

3,8898,6

3,91,79

1 1/2” 1,9048,3

6,12155,4

0,8120,6

2,8873,2

4 0,8822,4

4,50114,3

5,92,66

2” 2,37560,3

6,50165,1

0,8822,4

3,6291,9

8 0,7519,1

5,00127,0

7,003,18

2 1/2” 2,87573,0

7,50190,5

1,0025,4

4,12104,6

8 0,8822,4

5,88149,4

10,74,85

3” 3,5088,9

8,25209,5

1,1228,4

5,00127,0

8 0,8822,4

6,62168,1

15,06,81

3 1/2” 4,00101,6

9,00228,6

1,1930,2

5,50139,7

8 0,8822,4

7,25184,2

19,28,71

4” 4,50114,3

10,00254,0

1,2531,8

6,19157,2

8 0,8822,4

7,88200,2

25,311,5

5” 5,563141,3

11,00279,4

1,3835,1

7,31185,7

8 0,8822,4

9,25235

34,415,6

6” 6,625168,3

12,50317,5

1,4436,6

8,50215,9

12 0,8822,4

10,62269,7

46,020,9

8” 8,625219,1

15,00381,0

1,6241,1

10,62269,7

12 1,0025,4

13,00330,2

75,634,3

10” 10,75273

17,50444,5

1,8847,8

12,75323,8

16 1,1228,4

15,25387,4

11753,3

12” 12,75323,8

20,50520,7

2,0050,8

15,00381,0

16 1,2531,8

17,75450,9

17478,8

14” 14,0355,6

23,00584,2

2,1253,8

16,25412,8

20 1,2531,8

20,25514,4

231105

16” 16,0406,4

25,50647,7

2,2557,2

18,50469,9

20 1,3835,1

22,50571,5

302137

18” 18,0457,2

28,00711,2

2,3860,5

21,00533,4

24 1,3835,1

24,75628,7

386175

20” 20,0508

30,50774,7

2,5063,5

23,00584,2

24 1,3835,1

27,00685,8

487221

24”24,0

609,636,00914,4

2,7569,9

27,25692,2

24 1,6241,1

32,00812,8

747339

300 lb/sq. in.


ANSI B 16.5

b

g

DI Ø

k0.06"= (1,6mm)

58

Boru Pipe

FlanşFlange

Fatura Raised Face



Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm


Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

3 1/2” 4,00101,6

4” 4,50114,3

10,00254,0

1,3835,1

6,19157,2

8 1,0025,4

7,88200,2

30,213,7

5” 5,563141,3

11,00279,4

1,5038,1

7,31185,7

8 1,0025,4

9,25235,0

40,718,5

6” 6,625168,3

12,50317,5

1,6241,1

8,50215,9

12 1,0025,4

10,62269,7

56,225,5

8” 8,625219,1

15,00381,0

1,8847,8

10,62269,7

12 1,1228,4

13,00330,2

93,842,6

10” 10,75273

17,50444,5

2,1253,8

12,75323,8

16 1,2531,8

15,25387,4

14264,5

12” 12,75323,8

20,50520,7

2,2557,2

15,00381,0

16 1,3835,1

17,75450,9

20894,3

14” 14,0355,6

23,00584,2

2,3860,5

16,25412,8

20 1,3835,1

20,25514,4

273124

16” 16,0406,4

25,50647,7

2,5063,5

18,50469,9

20 1,5038,1

22,50571,5

357162

18” 18,0457,2

28,00711,2

2,6266,5

21,00533,4

24 1,5038,1

24,75628,7

452205

20” 20,0508

30,50774,7

2,7569,9

23,00584,2

24 1,6241,1

27,00685,8

560254

24”24,0

609,636,00914,4

3,0076,2

27,25692,2

24 1,8847,8

32,00812,8

850386


ANSI B 16.5

400 lb/sq. in.


0.25” = 6,4 mm

b

g

DI Ø

k

59

Boru Pipe

FlanşFlange

Fatura Raised Face



Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm


Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,5614,2

1,3835,1

4 0,6215,7

2,6266,6

1,70,76

3/4” 1,0526,7

4,62117,3

0,6215,8

1,6942,9

4 0,7519,1

3,2582,6

2,81,28

1” 1,31533,4

4,88124,0

0,6917,5

2,0050,8

4 0,7519,1

3,5088,9

3,51,60

1 1/4” 1,6642,2

5,25133,4

0,8120,6

2,5063,5

4 0,7519,1

3,8898,6

4,92,23

1 1/2” 1,9048,3

6,12155,4

0,8822,4

2,8873,2

4 0,8822,4

4,50114,3

7,23,25

2” 2,37560,3

6,50165,1

1,0025,4

3,6291,9

8 0,7519,1

5,00127,0

9,14,15

2 1/2” 2,87573,0

7,50190,5

1,1228,4

4,12104,6

8 0,8822,4

5,88149,4

13,56,13

3” 3,5088,9

8,25209,6

1,2531,8

5,00127,0

8 0,8822,4

6,62168,1

18,68,44

3 1/2” 4,00101,6

9,00228,6

1,3835,1

5,50139,7

8 1,0025,4

7,25184,2

24,211,0

4” 4,50114,3

10,75273,1

1,5038,1

6,19157,2

8 1,0025,4

8,50215,9

38,117,3

5” 5,563141,3

13,00330,2

1,7544,5

7,31185,7

8 1,1228,4

10,50266,7

64,829,4

6” 6,625168,3

14,00355,6

1,8847,8

8,50215,9

12 1,1228,4

11,50292,1

79,536,1

8” 8,625219,1

16,50419,1

2,1955,6

10,62269,7

12 1,2531,8

13,75349,3

13058,9

10” 10,75273

20,00508,0

2,5063,5

12,75323,8

16 1,3835,1

17,00431,8

21597,5

12” 12,75323,8

22,00558,8

2,6266,5

15,00381,0

20 1,3835,1

19,25489,0

273124

14” 14,0355,6

23,75603,3

2,7569,9

16,25412,8

20 1,5038,1

20,75527,1

333151

16” 16,0406,4

27,00685,8

3,0076,2

18,50469,9

20 1,6241,1

23,75603,3

471214

18” 18,0457,2

29,25743,0

3,2582,6

21,00533,4

20 1,7544,5

25,75654,1

599272

20” 20,0508

32,00812,8

3,5088,9

23,00584,2

24 1,7544,5

28,50723,9

769349

24”24,0

609,637,00939,8

4,00101,6

27,25692,2

24 2,0050,8

33,00838,2

1174533

ANSI B 16.5

600 lb/sq. in.


0.25” = 6,4 mm

b

g

DI Ø

k

60

Boru Pipe

FlanşFlange

Fatura Raised Face



Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm


Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

9,50241,3

1,5038,1

5,00127,0

8 1,0025,4

7,50190,5

28,913,1

4” 4,50114,3

11,50292,1

1,7544,5

6,19157,2

8 1,2531,8

9,25235

59,326,9

5” 5,563141,3

13,75349,3

2,0050,8

7,31185,7

8 1,3835,1

11,00279,4

80,436,5

6” 6,625168,3

15,00381,0

2,1955,6

8,50215,9

12 1,2531,8

12,50317,5

10447,4

8” 8,625219,1

18,50469,9

2,5063,5

10,62269,7

12 1,5038,1

15,50393,7

18282,5

10” 10,75273

21,50546,1

2,7569,9

12,75323,8

16 1,5038,1

18,50469,9

269122

12” 12,75323,8

24,00609,6

3,1279,2

15,00381,0

20 1,5038,1

21,00533,4

381173

14” 14,0355,6

25,25641,4

3,3885,9

16,25412,8

20 1,6241,1

22,00558,8

454206

16” 16,0406,4

27,75704,9

3,5088,9

18,50469,9

20 1,7544,5

24,25616

571259

18” 18,0457,2

31,00787,4

4,00101,6

21,00533,4

20 2,0050,8

27,00685,8

808367

20” 20,0508

33,75857,2

4,25108

23,00584,2

20 2,1253,8

29,50749,3

1020463

24” 24,0609,6

41,001041,4

5,50139,7

27,25692,2

20 2,6266,5

35,50901,7

1930876


ANSI B 16.5

900 lb/sq. in.


0.25” = 6,4 mm

b

g

DI Ø

k

61

Boru Pipe

FlanşFlange

Fatura Raised Face



Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm


Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

4,75120,7

0,8822,4

1,3835,1

4 0,8822,4

3,2582,6

3,91,77

3/4” 1,0526,7

5,12130,0

1,0025,4

1,6942,9

4 0,8822,4

3,5088,9

5,32,42

1” 1,31533,4

5,88149,4

1,1228,4

2,0050,8

4 1,0025,4

4,00101,6

7,93,57

1 1/4” 1,6642,2

6,25158,8

1,1228,4

2,5063,5

4 1,0025,4

4,38111,3

9,14,14

1 1/2” 1,9048,3

7,00177,8

1,2531,8

2,8873,2

4 1,1228,4

4,88124

12,75,75

2” 2,37560,3

8,50215,9

1,5038,1

3,6291,9

8 1,0025,4

6,50165,1

22,210,1

2 1/2” 2,87573,0

9,62244,4

1,6241,1

4,12104,6

8 1,1228,4

7,50190,5

30,814,0

3” 3,5088,9

10,50266,7

1,8847,8

5,00127,0

8 1,2531,8

8,00203,2

42,119,1

4” 4,50114,3

12,25311,2

2,1253,8

6,19157,2

8 1,3835,1

9,50241,3

65,929,9

5” 5,563141,3

14,75374,7

2,8873,2

7,31185,7

8 1,6241,1

11,50292,1

12958,4

6” 6,625168,3

15,50393,7

3,2582,6

8,50215,9

12 1,5038,1

12,50317,5

15871,8

8” 8,625219,1

19,00482,6

3,6291,9

10,62269,7

12 1,7544,5

15,50393,7

269122

10” 10,75273

23,00584,2

4,25108

12,75323,8

12 2,0050,8

19,00482,6

463210

12” 12,75323,8

26,50673,1

4,88124

15,00381,0

16 2,1253,8

22,50571,5

696316

14” 14,0355,6

29,50749,3

5,25133,4

16,25412,8

16 2,3860,5

25,00635,0

925420

16” 16,0406,4

32,50825,5

5,75146,1

18,50469,9

16 2,6266,5

27,75704,9

1229558

18” 18,0457,2

36,00914,4

6,38162,1

21,00533,4

16 2,8873,2

30,50774,7

1674760

20” 20,0508

38,75984,3

7,00177,8

23,00584,2

16 3,1279,2

32,75831,9

2126965

24” 24,0609,6

46,001168,4

8,00203,2

27,25692,2

16 3,6291,9

39,00990,6

34321558

ANSI B 16.5

1500 lb/sq.in.


0.25” = 6,4 mm

b

g

DI Ø

k

62

Boru Pipe

FlanşFlange

Alın Raised Face Saplama delikleri

Drilling Template


Nom.SizeDN

Dış Çap

ODin.

mm

Din.

mm

bin.

mm

gin.

mm


Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

5,25133,4

1,1930,2

1,3835,1

4 0,8822,4

3,5088,9

6,62,99

3/4” 1,0526,7

5,50139,7

1,2531,8

1,6942,9

4 0,8822,4

3,7595,3

7,73,50

1” 1,31533,4

6,25158,8

1,3835,1

2,0050,8

4 1,0025,4

4,25108,0

10,94,96

1 1/4” 1,6642,2

7,25184,2

1,5038,1

2,5063,5

4 1,1228,4

5,12130,0

16,27,35

1 1/2” 1,9048,3

8,00203,2

1,7544,5

2,8873,2

4 1,2531,8

5,75146,1

22,910,4

2” 2,37560,3

9,25235,0

2,0050,8

3,6291,9

8 1,1228,4

6,75171,5

34,415,6

2 1/2” 2,87573,0

10,50266,7

2,2557,2

4,12104,6

8 1,2531,8

7,75196,9

49,822,6

3” 3,5088,9

12,00304,8

2,6266,5

5,00127,0

8 1,3835,1

9,00228,6

76,734,8

4” 4,50114,3

14,00355,6

3,0076,2

6,19157,2

8 1,6241,1

10,75273,1

11953,9

5” 5,563141,3

16,50419,1

3,6291,9

7,31185,7

8 1,8847,8

12,75323,8

20090,8

6” 6,625168,3

19,00482,6

4,25108,0

8,50215,9

8 2,1253,8

14,50368,3

311141

8” 8,625219,1

21,75552,5

5,00127,0

10,62269,7

12 2,1253,8

17,25438,2

471214

10” 10,75273

26,50673,1

6,50165,1

12,75323,8

12 2,6266,5

21,25539,8

905411

12” 12,75323,8

30,00762,0

7,25184,2

15,00381,0

12 2,8873,2

24,38619,3

1304592

2500 lb/sq.in.


ANSI B 16.5

0.25” = 6,4 mm

b

g

DI Ø

k

63

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face

Civatalama ŞablonuDrilling Template Ağ

ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış Çapin.

mm

Din.

mm

Jin.

mm

cin.

mm

pin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

SayıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,5088,9

0,8822,4

0,6215,7

0,389,7

0,4411,2

0,6215,7

1,1930,2

1,3835,1

4 0,6215,7

2,3860,5

0,90,42

3/4” 1,0526,7

3,8898,6

1,0927,7

0,8220,8

0,4411,2

0,5012,7

0,6215,7

1,5038,1

1,6942,9

4 0,6215,7

2,7569,9

1,30,59

1” 1,31533,4

4,25108,0

1,3634,5

1,0526,7

0,5012,7

0,5614,2

0,6917,5

1,9449,3

2,0050,8

4 0,6215,7

3,1279,2

1,80,81

1 1/4” 1,6642,2

4,62117,3

1,7043,2

1,3835,1

0,5614,2

0,6215,7

0,8120,6

2,3158,7

2,5063,5

4 0,6215,7

3,5088,9

2,41,07

1 1/2” 1,9048,3

5,00127,0

1,9549,5

1,6140,9

0,6215,7

0,6917,5

0,8822,4

2,5665,0

2,8873,2

4 0,6215,7

3,8898,6

3,01,36

2” 2,37560,3

6,00152,4

2,4462,0

2,0752,6

0,6917,5

0,7519,1

1,0025,4

3,0677,7

3,6291,9

4 0,7519,1

4,75120,7

4,62,10

2 1/2” 2,87573,0

7,00177,8

2,9474,7

2,4762,7

0,7519,1

0,8822,4

1,1228,4

3,5690,4

4,12104,6

4 0,7519,1

5,50139,7

7,33,33

3” 3,5088,9

7,50190,5

3,5790,7

3,0778,0

0,8120,6

0,9423,9

1,1930,2

4,25108,0

5,00127,0

4 0,7519,1

6,00152,4

8,63,90

Boru Pipe

FlanşFlange

Göbek ÇapıHub

AlınRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış Çapin.

mm

Din.

mm

Jin.

mm

cin.

mm

pin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

SayıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,8822,4

0,6215,7

0,389,7

0,5614,2

0,8822,4

1,5038,1

1,3835,1

4 0,6215,7

2,6266,5

1,50,66

3/4” 1,0526,7

4,62117,3

1,0927,7

0,8220,8

0,4411,2

0,6215,7

1,0025,4

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,51,15

1” 1,31533,4

4,88124

1,3634,5

1,0526,7

0,5012,7

0,6917,5

1,0626,9

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,11,40

1 1/4” 1,6642,2

5,25133,4

1,7043,2

1,3835,1

0,5614,2

0,7519,1

1,0626,9

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

3,91,75

1 1/2” 1,9048,3

6,12155,4

1,9549,5

1,6140,9

0,6215,7

0,8120,6

1,1930,2

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

5,62,55

2” 2,37560,3

6,50165,1

2,4462,0

2,0752,6

0,6917,5

0,8822,4

1,3133,3

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

6,52,93

2 1/2” 2,87573,0

7,50190,5

2,9474,7

2,4762,7

0,7519,1

1,0025,4

1,5038,1

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

9,74,40

3” 3,5088,9

8,25209,5

3,5790,7

3,0778,0

0,8120,6

1,1228,4

1,6942,9

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

13,05,92

150 lb/sq. in.

Soket Kaynaklı FlanşlarSocket Welding Flanges

ANSI B 16.5

m

J

cg

h

0.06 ” (1,6 mm)

k

p

I Ø

bb

D

300 lb/sq. in.


ANSI B 16.5

m

J

cg

h

0.06 ” (1,6 mm)

k

p

I Ø

bb

D

64

Boru Pipe

FlanşFlange

Göbek ÇapıHub

AlınRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış Çapin.

mm

Din.

mm

Jin.

mm

cin.

mm

pin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

SayıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

3,7595,3

0,8822,4

Müş

teri

tara

fında

n be

lirle

nir.

To b

e sp

ecifi

ed b

y cu

stom

er

0,389,7

0,5614,2

0,8822,4

1,5038,1

1,3835,1

4 0,6215,7

2,6266,5

1,70,76

3/4” 1,0526,7

4,62117,3

1,0927,7

0,4411,2

0,6215,7

1,0025,4

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,81,29

1” 1,31533,4

4,88124,0

1,3634,5

0,5012,7

0,6917,5

1,0626,9

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,41,55

1 1/4” 1,6642,2

5,25133,4

1,7043,2

0,5614,2

0,8120,6

1,1228,4

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

4,52,06

1 1/2” 1,9048,3

6,12155,4

1,9549,5

0,6215,7

0,8822,4

1,2531,8

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

6,63,00

2” 2,37560,3

6,50165,1

2,4462,0

0,6917,5

1,0025,4

1,4436,6

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

8,13,67

2 1/2” 2,87573,0

7,50190,5

2,9474,7

0,7519,1

1,1228,4

1,6241,1

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

11,85,35

3” 3,5088,9

8,25209,6

3,5790,7

0,8120,6

1,2531,8

1,8146,0

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

15,67,06

Boru Pipe

FlanşFlange

Göbek ÇapıHub

AlınRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış Çapin.

mm

Din.

mm

Jin.

mm

cin.

mm

pin.

mm

bin.

mm

hin.

mm

min.

mm

gin.

mm

SayıNum-

ber

Iin.

mm

kin.

mm

~Pounds

Kg

1/2” 0,8421,3

4,75120,7

0,8822,4

Müş

teri

tara

fında

n be

lirle

nir.

To b

e sp

ecifi

ed b

y cu

stom

er

0,389,7

0,8822,4

1,2531,8

1,5038,1

1,3835,1

4 0,8822,4

3,2582,6

4,01,80

3/4” 1,0526,7

5,12130,0

1,0927,7

0,4411,2

1,0025,4

1,3835,1

1,7544,5

1,6942,9

4 0,8822,4

3,5088,9

5,32,41

1” 1,31533,4

5,88149,4

1,3634,5

0,5012,7

1,1228,4

1,6241,1

2,0652,3

2,0050,8

4 1,0025,4

4,00101,6

7,83,55

1 1/4” 1,6642,2

6,25158,8

1,7043,2

0,5614,2

1,1228,4

1,6241,1

2,5063,5

2,5063,5

4 1,0025,4

4,38111,3

8,94,02

1 1/2” 1,9048,3

7,00177,8

1,9549,5

0,6215,7

1,2531,8

1,7544,5

2,7569,9

2,8873,2

4 1,1228,4

4,88124

12,05,45

2” 2,37560,3

8,50215,9

2,4462,0

0,6917,5

1,5038,1

2,2557,2

4,12104,6

3,6291,9

8 1,0025,4

6,50165,1

22,510,2

2 1/2” 2,87573,0

9,62244,3

2,9474,7

0,7519,1

1,6241,1

2,5063,5

4,88124

4,12104,6

8 1,1228,4

7,50190,5

30,613,9

m

J

cg

h

0.25” (6,4mm)

k

p

I Ø

bb

D600 lb/sq. in.


ANSI B 16.5

m

J

cg

h

0.25” (6,4mm)

k

p

I Ø

bb

D1500 lb/sq.in.


ANSI B 16.5

65

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

h/h1in.

mm

min.

mm

gin.

mm

Civata sayısı

Number

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

3,5088,9

Sını

f 150

vid

alı fl

anşla

rda

havş

a işl

emin

e ge

rek

yokt

ur N

o Co

unte

r Bor

e Re

quire

d on

150

lb T

hrea

ded

Flan

ges

0,4411,2

0,6215,7

1,1930,2

1,3835,1

4 0,6215,7

2,3860,5

0,90,39

3/4” 1,0526,7

3,8898,6

0,5012,7

0,6215,7

1,5038,1

1,6942,9

4 0,6215,7

2,7569,9

1,20,56

1” 1,31533,4

4,25108,0

0,5614,2

0,6917,5

1,9449,3

2,0050,8

4 0,6215,7

3,1279,2

1,70,78

1 1/4” 1,6642,2

4,62117,3

0,6215,7

0,8120,6

2,3158,7

2,5063,5

4 0,6215,7

3,5088,9

2,31,03

1 1/2” 1,9048,3

5,00127,0

0,6917,5

0,8822,4

2,5665,0

2,8873,2

4 0,6215,7

3,8898,6

2,91,32

2” 2,37560,3

6,00152,4

0,7519,1

1,0025,4

3,0677,7

3,6291,9

4 0,7519,1

4,75120,7

4,52,06

2 1/2” 2,87573,0

7,00177,8

0,8822,4

1,1228,4

3,5690,4

4,12104,6

4 0,7519,1

5,50139,7

7,23,28

3” 3,5088,9

7,50190,5

0,9423,9

1,1930,2

4,25108,0

5,00127,0

4 0,7519,1

6,00152,4

8,53,85

3 1/2” 4,00101,6

8,50215,9

0,9423,9

1,2531,8

4,81122,2

5,50139,7

8 0,7519,1

7,00177,8

10,64,81

4” 4,50114,3

9,00228,6

0,9423,9

1,3133,3

5,31134,9

6,19157,2

8 0,7519,1

7,50190,5

11,75,30

5” 5,563141,3

10,00254,0

0,9423,9

1,4436,6

6,44163,6

7,31185,7

8 0,8822,4

8,50215,9

13,46,07

6” 6,625168,3

11,00279,4

1,0025,4

1,5639,6

7,56192,0

8,50215,9

8 0,8822,4

9,50241,3

16,47,45

8” 8,625219,1

13,50342,9

1,1228,4

1,7544,5

9,69246,1

10,62269,7

8 0,8822,4

11,75298,5

26,712,1

10” 10,75273

16,00406,4

1,1930,2

1,9449,3

12,00304,8

12,75323,8

12 1,0025,4

14,25362,0

36,316,5

12” 12,75232,8

19,00482,6

1,2531,8

2,1955,6

14,38365,3

15,00381,0

12 1,0025,4

17,00431,8

57,726,2

14” 14,0355,6

21,00533,4

1,3835,1

2,2557,2

15,75400,1

16,25412,8

12 1,1228,4

18,75476,3

76,234,6

16” 16,0406,4

23,50596,9

1,4436,6

2,5063,5

18,00457,2

18,50469,9

16 1,1228,4

21,25539,8

98,744,8

18” 18,0457,2

25,00635,0

1,5639,6

2,6968,3

19,88505,0

21,00533,4

16 1,2531,8

22,75577,9

10848,9

20” 20,0508

27,50698,5

1,6942,9

2,8873,2

22,00558,8

23,00584,2

20 1,2531,8

25,00635,0

13661,9

24” 24,0609,6

32,00812,8

1,8847,8

3,2582,6

26,12663,4

27,25692,2

20 1,3835,1

29,50749,3

19186,9

150 lb/sq. in.

Vida Dişli FlanşlarThreaded Flanges

ANSI B 16.5

m

g

h h1b

0.06 ” (1,6 mm)k

D

IJ

66

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

h1in.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

3,7595,2

0,9323,6

0,5614,2

0,8822,3

0,6215,7

1,5038,1

1,3835,0

4 0,6215,7

2,6266,5

1,40,64

3/4” 1,0526,7

4,62117,3

1,1429,0

0,6215,7

1,0025,4

0,6215,7

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,51,12

1” 1,31533,4

4,88124

1,4135,8

0,6917,5

1,0626,9

0,6917,5

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,01,36

1 1/4” 1,6642,2

5,25133,4

1,7544,5

0,7519,1

1,0626,9

0,8120,6

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

3,71,68

1 1/2” 1,9048,3

6,12155,4

1,9950,5

0,8120,6

1,1930,2

0,8822,4

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

5,52,49

2” 2,37560,3

6,50165,1

2,5063,5

0,8822,4

1,3133,3

1,1228,4

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

6,32,87

2 1/2” 2,87573,0

7,50190,5

3,0076,2

1,0025,4

1,5038,1

1,2531,8

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

9,54,32

3” 3,5088,9

8,25209,6

3,6392,2

1,1228,4

1,6942,9

1,2531,8

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

12,95,85

3 1/2” 4,00101,6

9,00228,6

4,13104,9

1,1930,2

1,7544,5

1,4436,6

5,25133,4

5,50139,7

8 0,8822,4

7,25184,2

16,27,34

4” 4,50114,3

10,00254,0

4,63117,6

1,2531,8

1,8847,8

1,4436,6

5,75146,1

6,19157,2

8 0,8822,4

7,88200,2

21,29,61

5” 5,563141,3

11,00279,4

5,69144,5

1,3835,1

2,0050,8

1,6942,9

7,00177,8

7,31185,7

8 0,8822,4

9,25235

27,112,3

6” 6,625168,3

12,50317,5

6,75171,5

1,4436,6

2,0652,3

1,8146

8,12206,2

8,50215,9

12 0,8822,4

10,62269,7

34,415,6

8” 8,625219,1

15,00381,0

8,75222,3

1,6241,1

2,4462

2,0050,8

10,25260,4

10,62269,7

12 1,0025,4

13,00330,2

53,324,2

10” 10,75273

17,50444,5

10,88276,4

1,8847,8

2,6266,5

2,1955,6

12,62320,5

12,75323,8

16 1,1228,4

15,25387,4

75,134,1

12” 12,75323,8

20,50520,7

12,94328,7

2,0050,8

2,8873,2

2,3860,5

14,75374,7

15,00381,0

16 1,2531,8

17,75450,9

11049,8

14” 14,0355,6

23,00584,2

14,19360,4

2,1253,8

3,0076,2

2,5063,5

16,75425,5

16,25412,8

20 1,2531,8

20,25514,4

15469,9

16” 16,0406,4

25,50647,7

16,19411,12

2,2557,2

3,2582,6

2,6968,3

19,00482,6

18,50469,9

20 1,3835,1

22,50571,5

19488,1

18” 18,0457,2

28,00711,2

18,19462

2,3860,5

3,5088,9

2,7569,9

21,00533,4

21,00533,4

24 1,3835,1

24,75628,7

240109

20” 20,0508

30,50774,7

20,19512,8

2,5063,5

3,7595,3

2,8873,2

23,12587,2

23,00584,2

24 1,3835,1

27,00685,8

295134

24” 24,0609,6

36,00914,4

24,19614,4

2,7569,9

4,19106,4

3,2582,6

27,62701,5

27,25692,2

24 1,6241,1

32,00812,8

443201

300 lb/sq. in.


ANSI B 16.5

m

g

h h1b

0.06 ” (1,6 mm)k

D

IJ

67

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

h1in.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

3 1/2” 4,00101,6

4” 4,50114,3

10,00254,0

4,63117,6

1,3835,1

2,0050,8

1,4436,6

5,75146,1

6,19157,2

8 1,0025,4

7,88200,2

24,411,1

5” 5,563141,3

11,00279,4

5,69144,5

1,5038,1

2,1253,8

1,6942,9

7,00177,8

7,31185,7

8 1,0025,4

9,25235,0

30,613,9

6” 6,625168,3

12,50317,5

6,75171,5

1,6241,1

2,2557,2

1,8146,0

8,12206,2

8,50215,9

12 1,0025,4

10,62269,7

40,318,3

8” 8,625219,1

15,00381,0

8,75222,3

1,8847,8

2,6968,3

2,0050,8

10,25260,4

10,62269,7

12 1,1228,4

13,00330,2

63,028,6

10” 10,75273

17,50444,5

10,88276,4

2,1253,8

2,8873,2

2,1955,6

12,62320,5

12,75323,8

16 1,2531,8

15,25387,4

86,339,2

12” 12,75323,8

20,50520,7

12,94328,7

2,2557,2

3,1279,2

2,3860,5

14,45374,7

15,00381,0

16 1,3835,1

17,75450,9

12657,0

14” 14,0355,6

23,00584,2

14,19360,4

2,3860,5

3,3184,1

2,5063,5

16,75425,5

16,25412,8

20 1,3835,1

20,25514,4

17479,1

16” 16,0406,4

25,50647,7

16,19411,2

2,5063,5

3,6993,7

2,6968,3

19,00482,6

18,50469,9

20 1,5038,1

22,50571,5

223101

18” 18,0457,2

28,00711,2

18,19462,0

2,6266,5

3,8898,6

2,7569,9

21,00533,4

21,00533,4

24 1,5038,1

24,75628,7

271123

20” 20,0508

30,50774,7

20,19512,8

2,7569,9

4,00101,6

2,8873,2

23,12587,2

23,00584,2

24 1,6241,1

27,00685,8

322146

24” 24,0609,6

36,00914,4

24,19614,4

3,0076,2

4,50114,3

3,2582,6

27,62701,5

27,25692,2

24 1,8847,8

32,00812,8

482219


400 lb/sq. in.


ANSI B 16.5

m

g

h h1b

0.25” (6,4mm)k

D

IJ

68

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

hin.nm

h1in.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

3,7595,3

0,9323,6

0,5614,2

0,8822,4

0,6215,7

1,5038,1

1,3835,1

4 0,6215,7

2,6266,5

1,60,74

3/4” 1,0526,7

4,62117,3

1,1429,0

0,6215,7

1,0025,4

0,6215,7

1,8847,8

1,6942,9

4 0,7519,1

3,2582,6

2,81,27

1” 1,31533,4

4,88124,0

1,4135,8

0,6917,5

1,0626,9

0,6917,5

2,1253,8

2,0050,8

4 0,7519,1

3,5088,9

3,31,52

1 1/4” 1,6642,2

5,25133,4

1,7544,5

0,8120,6

1,1228,4

0,8120,6

2,5063,5

2,5063,5

4 0,7519,1

3,8898,6

4,52,03

1 1/2” 1,9048,3

6,12155,4

1,9950,5

0,8822,4

1,2531,8

0,8822,4

2,7569,9

2,8873,2

4 0,8822,4

4,50114,3

6,52,96

2” 2,37560,3

6,50165,1

2,5063,5

1,0025,4

1,4436,6

1,1228,4

3,3184,1

3,6291,9

8 0,7519,1

5,00127,0

8,03,62

2 1/2” 2,87573,0

7,50190,5

3,0076,2

1,1228,4

1,6241,1

1,2531,8

3,94100,1

4,12104,6

8 0,8822,4

5,88149,4

11,65,28

3” 3,5088,9

8,25209,6

3,6392,2

1,2531,8

1,8146,0

1,3835,1

4,62117,3

5,00127,0

8 0,8822,4

6,62168,1

15,47,00

3 1/2” 4,00101,6

9,00228,6

4,13104,9

1,3835,1

1,9449,3

1,5639,6

5,25133,4

5,50139,7

8 1,0025,4

7,25184,2

19,58,84

4” 4,50114,3

10,75237,1

4,63117,6

1,5038,1

2,1253,8

1,6241,1

6,00152,4

6,19157,2

8 1,0025,4

8,50215,9

31,914,5

5” 5,563141,3

13,00330,2

5,69144,5

1,7544,5

2,3860,5

1,8847,8

7,44189,0

7,31185,7

8 1,1228,4

10,50266,7

53,724,4

6” 6,625168,3

14,00355,6

6,75171,5

1,8847,8

2,6266,5

2,0050,8

8,75222,3

8,50215,9

12 1,1228,4

11,50292,1

63,228,7

8” 8,625219,1

16,50419,1

8,75222,3

2,1955,6

3,0076,2

2,2557,2

10,75273,1

10,62269,7

12 1,2531,8

13,75349,3

95,643,4

10” 10,75273

20,00508,0

10,88276,4

2,5063,5

3,3885,9

2,5665,0

13,50342,9

12,75323,8

16 1,3835,1

17,00431,8

15570,3

12” 12,75323,8

22,00558,8

12,94328,7

2,6266,5

3,6291,9

2,7569,9

15,75400,1

15,00381,0

20 1,3835,1

19,25489,0

18684,2

14” 14,0355,6

23,75603,3

14,19360,4

2,7569,9

3,6993,7

2,8873,2

17,00431,8

16,25412,8

20 1,5038,1

20,75527,1

21798,7

16” 16,0406,4

27,00685,8

16,19411,2

3,0076,2

4,19106,4

3,0677,7

19,50495,3

18,50469,9

20 1,6241,1

23,75603,3

313142

18” 18,0457,2

29,25743,0

18,19462,0

3,2582,6

4,62117,3

3,1279,2

21,50546,1

21,00533,4

20 1,7544,5

25,75654,1

381173

20” 20,0508

32,00812,8

20,19512,8

3,5088,9

5,00127,0

3,2582,6

24,00609,0

23,00584,2

24 1,7544,5

28,50723,9

485220

24” 24,0609,6

37,00939,8

24,19614,4

4,00101,6

5,50139,7

3,6292,0

28,25717,6

27,25692,2

24 2,0050,8

33,00838,2

687312

600 lb/sq. in.


ANSI B 16.5

m

g

h h1b

0.25” (6,4mm)k

D

IJ

69

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

h1in.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

3/4” 1,0526,7

1” 1,31533,4

1 1/4” 1,6642,2

1 1/2” 1,9048,3

2” 2,37560,3

2 1/2” 2,87573,0

3” 3,5088,9

9,50241,3

3,6392,2

1,5038,1

2,1253,8

1,6241,1

5,00127,0

5,00127,0

8 1,0025,4

7,50190,5

25,611,6

4” 4,50114,3

11,50292,1

4,63117,6

1,7544,5

2,7569,8

1,8847,8

6,25158,7

6,19157,2

8 1,2531,8

9,25235

43,419,7

5” 5,563141,3

12,75349,3

5,69144,5

2,0050,8

3,1279,2

2,1253,8

7,50190,5

7,31185,7

8 1,3835,1

11,00279,4

70,331,9

6” 6,625168,3

15,00381,0

6,75171,5

2,1955,6

3,3885,9

2,2557,2

9,25235

8,50215,9

12 1,2531,8

12,50317,5

90,541,1

8” 8,625219,1

18,50469,9

8,75222,3

2,5063,5

4,00101,6

2,5063,5

11,75298,5

10,62269,7

12 1,5038,1

15,50393,7

15670,7

10” 10,75273

21,50545,1

10,88276,4

2,7569,9

4,25108

2,8171,4

14,50368,3

12,75323,8

16 1,5038,1

18,50469,9

223101

12” 12,75323,8

24,00609,6

12,94328,7

3,1279,3

4,62117,3

3,0076,2

16,50419,1

15,00381,0

20 1,5038,1

21,00533,4

293133

14” 14,0355,6

25,25641,4

14,19360,4

3,3885,9

5,12130,0

3,2582,6

17,75450,9

16,25412,8

20 1,6241,1

22,00558,8

337153

16” 16,0406,4

27,75704,9

16,19411,2

3,5088,9

5,25133,4

3,3885,9

20,00508,0

18,50469,8

20 1,7544,5

24,25616

408185

18” 18,0457,2

31,00787,4

18,19462,0

4,00101,6

6,00152,4

3,5088,9

25,25565,2

21,00533,4

20 2,0050,8

27,00685,8

568258

20” 20,0508

33,75857,3

20,19512,8

4,25108

6,25158,8

3,6291,9

24,50622,3

23,00584,2

20 2,1253,8

29,50749,3

698317

24”

24,0609,6

41,001041,4

24,19614,4

5,50139,7

8,00203,2

4,00101,6

29,50749,3

27,25692,2

20 2,6266,5

35,50901,7

1335606


900 lb/sq. in.


m

g

h h1b

0.25” (6,4mm)k

D

IJ

ANSI B 16.5

70

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face


ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

h1in.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

4,75120,7

0,9323,6

0,8822,4

1,2531,8

0,8822,4

1,5038,1

1,3835,1

4 0,8822,4

3,2582,6

3,81,74

3/4” 1,0526,7

5,12130,0

1,1429,0

1,0025,4

1,3835,1

1,0025,4

1,7544,5

1,6942,9

4 0,8822,4

3,5088,9

5,22,34

1” 1,31533,4

5,88149,4

1,4135,8

1,1228,4

1,6241,1

1,1228,4

2,0652,3

2,0050,8

4 1,0025,4

4,00101,6

7,63,44

1 1/4” 1,6642,2

6,25158,8

1,7544,5

1,1228,4

1,6241,1

1,1930,2

2,5063,5

2,5063,5

4 1,0025,4

4,38111,3

8,63,91

1 1/2” 1,9048,3

7,00177,8

1,9950,5

1,2531,8

1,7544,5

1,2531,8

2,7569,9

2,8873,2

4 1,1228,4

4,88124

11,85,36

2” 2,37560,3

8,50215,9

2,5063,5

1,5038,1

2,2557,2

1,5038,1

4,12104,6

3,6291,9

8 1,0025,4

6,50165,1

21,79,85

2 1/2” 2,87573,0

9,62244,3

3,0076,2

1,6241,1

2,5063,5

1,8847,8

4,88124

4,12104,6

8 1,1228,4

7,50190,5

30,213,7

3” 3,5088,9

10,50266,7

3,6392,2

1,8847,8

2,8873,2

2,0050,8

5,25133,4

5,00127,0

8 1,2531,8

8,00203,2

39,417,9

4” 4,50114,3

12,25311,2

4,63117,6

2,1253,8

3,5690,4

2,2557,2

6,38162,1

6,19157,2

8 1,3835,1

9,50241,3

61,227,8

5” 5,563141,3

14,75374,7

5,69144,5

2,8873,2

4,12104,6

2,5063,5

7,75196,9

7,31185,7

8 1,6241,1

11,50292,1

11451,8

6” 6,625168,3

15,50393,7

6,75171,5

3,2582,6

4,69119,1

2,7569,9

9,00228,6

8,50215,9

12 1,5038,1

12,50317,5

13461,0

8” 8,625219,1

19,00482,6

8,75222,3

3,6291,9

5,62142,7

3,0076,2

11,50292,1

10,62269,7

12 1,7544,5

15,50393,7

227103

10” 10,75273

23,00584,2

10,88276,4

4,25108

6,25158,8

3,3184,1

14,50368,3

12,75323,8

12 2,0050,8

19,00482,6

386175

12” 12,75232,8

26,50673,1

12,94328,7

4,88124

7,12180,8

3,6291,9

17,75450,9

15,00381,0

16 2,1253,8

22,50571,5

582264

1500 lb/sq. in.


m

g

h h1b

0.25” (6,4mm)k

D

IJ

ANSI B 16.5

71

Boru Pipe

FlanşFlange

Göbek ÇapıHub

FaturaRaiced

Face

Saplama delikleriDrilling Template Ağ

ırlık

Appr

ox.

Wei

ght

Nom.SizeDN

Dış ÇapOD

in.mm

Din.

mm

Jin.

mm

bin.

mm

hin.

mm

h1in.

mm

min.

mm

gin.

mm

Civata sayısıNum-

ber

Iin.

mm

kin.

mm ~Po

unds

Kg

1/2” 0,8421,3

5,25133,4

0,9323,6

1,1930,2

1,5639,6

1,1228,4

1,6942,9

1,3835,1

4 0,8822,4

3,5088,9

6,52,95

3/4” 1,0526,7

5,50139,7

1,1429,0

1,2531,8

1,6942,9

1,2531,8

2,0050,8

1,6942,9

4 0,8822,4

3,7595,3

7,63,44

1” 1,31533,4

6,25158,8

1,4135,8

1,3835,1

1,8847,8

1,3835,1

2,2557,2

2,0050,8

4 1,0025,4

4,25108,0

10,64,82

1 1/4” 1,6642,2

7,25184,2

1,7544,5

1,5038,1

2,0652,3

1,5038,1

2,8873,2

2,5063,5

4 1,1228,4

5,12130,0

156,77,14

1 1/2” 1,9048,3

8,00203,2

1,9950,5

1,7544,5

2,3860,5

1,7544,5

3,1279,2

2,8873,2

4 1,2531,8

5,75146,1

22,010,0

2” 2,37560,3

9,25235,0

2,5063,5

2,0050,8

2,7569,9

2,0050,8

3,7595,3

3,6291,9

8 1,1228,4

6,75171,5

32,614,8

2 1/2” 2,87573,0

10,50266,7

3,0076,2

2,2557,2

3,1279,2

2,2557,2

4,50114,3

4,12104,6

8 1,2531,8

7,75196,9

47,421,5

3” 3,5088,9

12,00304,8

3,6392,2

2,6266,5

3,6291,9

2,5063,5

5,25133,4

5,00127,0

8 1,3835,1

9,00228,6

71,832,6

4” 4,50114,3

14,00355,6

4,63117,6

3,0076,2

4,25108,0

2,7569,9

6,50165,1

6,19157,2

8 1,6241,1

10,75273,1

11752,9

5” 5,563141,3

16,50419,1

5,69144,5

3,6291,9

5,12130,0

3,0076,2

8,00203,2

7,31185,7

8 1,8847,8

12,75323,8

18383,1

6” 6,625168,3

19,00482,6

6,75171,5

4,25108,0

6,00152,4

3,2582,6

9,25235,0

8,50215,9

8 2,1253,8

14,50368,3

282128

8” 8,625219,1

21,75552,5

8,75222,3

5,00127,0

7,00177,8

3,7595,3

12,00304,8

10,62269,7

12 2,1253,8

17,25438,2

414188

10” 10,75273

26,50673,1

10,88276,4

6,50165,1

9,00228,6

4,25108,0

14,75374,7

12,75323,8

12 2,6266,5

21,25539,8

782355

12” 12,75323,8

30,00762,0

12,94328,7

7,25184,2

10,00254,0

4,75120,7

17,38441,5

15,00381,0

12 2,8873,2

24,38619,3

1110504

2500 lb/sq. in.


ANSI B 16.5

m

g

h h1b

0.25” (6,4mm)k

D

IJ

72

BS 3293

British Standard 3293

Welding Neck and Slip–on Flangesacc. to B.S. 3293

Nominal Size larger than 24”

BRITISH STANDARD 3293 is a specification for carbon steel pipe flanges for the petroleum industry.

Kaynak Boyunlu ve Geçme Göbekli Flanşlar B.S. 3293 Standardı’na göre

Nominal çap 24 inçten büyük

BS 3293 STANDARDI petrol sanayisinde kullanılan karbon çelik flanşları için bir normdur.

Nominal Pressure lb./sq. in.Nominal Basınç kp/cm2

Nominal Basınç N/cm2

15010,6104

30021,1207

40028,1276

60042,2414

Flanş tipleriTyp of flange

from 26” to max. Nominal Sizes26” ve üstündeki nominal boyutlar için

Kaynak Boyunlu FlanşWelding Neck Flange 48” 36” 36” 36”

benzer, Kaynak Boyunlu Bilezikli (RTJ)same, Ring Type Joint – 36” 36” 36”

Geçme Göbekli Flanş Slip–on Flanges 48” 36” 36” 36”

Benzer, Geçme Göbekli Flanş Bilezikli (RTJ)Same, Ring Type Joint – 36” 36” 36”

Materials acc. to ASTM. Other materials on requiryMalzemeler ASTM’ye göre. Diğer malzemeler isteğe göre.

Facing and Dimensional Tolerancesacc. to ANSI B16.5except Length “h” at Slip–onFlanges = ± 0,125”

Geçme Göbekli Flanşlarda “h” uzunluğu hariç = ± 0,125” , fatura ve boyut toleransları ANSI B16.5 Standardı’na göredir.

Welding EndsKaynak uçları

Flanş ucunda tavsiye edilen Kaynak Ucu Kalınlığı (T) 3/4” veya aşağısıdır.Recommended Bevel for Wall Thicknesses (T) at End of Flange, 3/4” or less

Flanş ucunda tavsiye edilen Kaynak Ucu Kalınlığı (T) 3/4” den yukarısı.Recommended Bevel for Wall Thicknesses (T) at End of Flange, greater than 3/4”

0.16” ± 1/32”(1,6 mm ± 0,8 mm)

371/2 ±2 1/2°

37 1/2° 2 1/2

1/16” ± 1 /3 2 ”

10° ± 1°

1.6 ± 0 ,8 mm

3/4”=19mm

°

73

BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised face


AğırlıkWeight

DNOD

inch mm

Dinch mm

Jinch mm

binch mm

h inch mm

ainch mm

minch mm

ginch mm

Civata sayısı

Number

Iinch mm

kinch mm

PoundsKg

26” 26,0660,4

34 1/2

870To

be

spec

ified

by

cust

omer

.M

üşte

ri ta

rafın

dan

belir

leni

r.2

50,85

127,026

660,428 1/2

723,929 1/4

74324 1 3/8

34,931 3/4

806,5260118

28” 28,0711,2

36 1/2

927,12 1/16

52,45 1/16

128,628

711,230 3/4

781,131 1/4

793,828 1 3/8

34,934

863,6295134

30” 30,0762

38 3/4

984,32 1/8

54,05 1/8

130,230

762,032 3/4

831,933 3/4

857,328 1 3/8

34,936

914,4338153

32” 32,0812,8

41 3/4

1060,52 1/4

57,25 1/4

133,432

812,835

889,035 3/4

908,128 1 5/8

41,338 1/2

977,9420190

34” 34,0863,6

43 3/4

1111,32 5/16

58,85 5/18

13534

863,637

939,837 3/4

958,832 1 5/8

41,340 1/2

1028,7468212

36” 36,0914,4

461168,4

2 3/8

60,35 3/8

136,536

914,439 1/4

99740 1/4

1022,432 1 5/8

41,342 3/4

1085,9534242

38” 38,0965,2

48 3/4

1238,32 3/8

60,35 3/8

136,538

965,241 3/4

1016,542 1/4

1073,232 1 5/8

41,345 1/4

1149,4625284

40” 40,01016,0

50 3/4

1289,12 1/2

63,55 1/2

139,740

1016,043 3/4

1111,344 1/4

112436 1 5/8

41,347 1/4

1200,2685311

42” 42,01066,8

531346,2

2 5/8

66,75 5/8

142,942

1066,846

1168,447

1193,836 1 5/8

41,349 1/2

1257,3788358

44” 44,01117,6

55 1/4

1403,42 5/8

66,75 5/8

142,944

1117,648

1219,249

1244,640 1 5/8

41,351 3/4

1314,5830376

46” 46,01168,4

57 1/4

1454,22 11/16

68,35 11/16

144,546

1168,450

1270,051

1295,440 1 5/8

41,353 3/4

1365,3880399

48” 48,01219,2

59 1/2

1511,32 3/4

69,95 3/4

146,148

1219,252 7/4

1327,253 1/2

1358,944 1 5/8

41,356

1422,4970440

150 lb/sq. in.

Kaynak Boyunlu FlanşWelding Neck Flanges

300 lb/sq. in.


BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised face


AğırlıkWeight

DNOD

inch mm

Dinch mm

Jinch mm

binch mm

h inch mm

ainch mm

minch mm

ginch mm

Civata sayısı

Number

Iinch mm

kinch mm

PoundsKg

26” 26,0660,4

38 1/4

971,6

To b

e sp

ecifi

ed b

y cu

stom

er.

Müş

teri

tara

fında

n be

lirle

nir.

3 1/8

79,47 1/4

184,226 1/4

666,828 3/8

720,729 1/2

749,3 28 1 3/4

44,534 1/2

876,3615279

28” 28,0711,2

40 3/4

1035,13 3/8

85,77 3/4

196,928 1/4

717,630 1/2

774,731 1/2

800,1 28 1 3/4

44,537

939,8750340

30” 30,0762

431092,2

3 5/8

92,18 1/4

209,630 1/4

768,432 9/16

827,133 3/4

857,3 28 1 7/8

47,639 1/4

997,0858390

32” 32,0812,8

45 1/4

1149,43 7/8

98,48 3/4

222,332 1/4

819,234 11/16

881,136

914,4 28 250,8

41 1/2

1054,1960435

34” 34,0863,6

47 1/2

1206,54

101,69 1/8

231,834 5/16

871,536 7/8

936,638

965,2 28 250,8

43 1/2

1104,91110504

36” 36,0914,4

501270,0

4 1/8

104,89 1/2

241,336 5/16

922,339

990,640 1/4

1022,4 32 2 1/8

54,046

1168,41233560

a

h

mg

b

1/16”= 1,6 mm

37,5°

1/16” (1,6 mm)

JØ

Dk

a

h

mg

b

1/16”= 1,6 mm

37,5°

1/16” (1,6 mm)

JØ

Dk

B.S. 3293

B.S. 3293

74

BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised

face


AğırlıkWeight

DNOD

inch mm

Dinch mm

Jinch mm

binch mm

h inch mm

ainch mm

minch mm

ginch mm

Civata sayısı

Number

Iinch mm

kinch mm

PoundsKg

26” 26,0660,4

38 1/4

971,6

To b

e sp

ecifi

ed b

y cu

stom

er.

Müş

teri

tara

fında

n be

lirle

nir.

3 1/2

88,97 2/8

193,726 5/16

668,328 5/8

727,129 1/2

749,328 1 7/8

47,634 1/2

876,3750340

28” 28,0711,2

40 3/4

1035,13 3/4

95,38 1/8

206,428 5/16

719,130 13/16

782,631 1/2

800,128 2

50,837

939,8880399

30” 30,0762

431092,2

4101,6

8 5/8

219,130 5/16

769,932 15/16

836,633 3/4

857,328 2 1/8

54,039 1/4

9971000454

32” 32,0812,8

45 1/4

1149,44 1/4

108,09 1/8

231,832 3/8

822,335

889,036

914,428 2 1/8

54,041 1/2

1054,11150522

34” 34,0863,6

47 1/2

1206,54 3/8

1111,19 1/2

241,334 3/8

873,137 3/16

944,638

965,228 2 1/8

54,043 1/2

1104,91300590

36” 36,0914,4

501270,0

4 1/2

114,39 7/8

250,936 7/16

925,539 3/8

1000,140 1/4

1022,432 2 1/8

54,046

1168,41475669

400 lb/sq. in.


600 lb/sq. in.


BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised face


AğırlıkWeight

DNOD

inch mm

Dinch mm

Jinch mm

binch mm

h inch mm

ainch mm

minch mm

ginch mm

Civata sayısı

Number

Iinch mm

kinch mm

PoundsKg

26” 26,0660,4

401016,0

To b

e sp

ecifi

ed b

y cu

stom

er.

Müş

teri

tara

fında

n be

lirle

nir.

4 1/4

1088 3/4

222,326 7/16

671,529 7/16

747,729 1/2

749,3 28 250,8

36914,4

963437

28” 28,0711,2

42 1/4

1073,24 2/8

111,19 3/4

23528 1/2

723,931 5/8

803,331 1/2

800,1 28 2 1/8

54,038

965,21120508

30” 30,0762

44 1/2

1130,34 1/2

114,39 3/4

247,730 1/2

774,733 15/16

862,033 3/4

857,3 28 2 1/8

54,040 1/4

1022,41232559

32” 32,0812,8

471193,8

4 5/8

117,510 1/4

260,432 1/2

825,536 1/8

917,636

914,4 28 2 3/8

60,342 1/2

1079,51500680

34” 34,0863,6

491244,6

4 3/4

120,710 5,8

269,934 9/16

877,938 5/16

973,138

965,2 28 2 3/8

60,344 1/2

1130,31580717

36” 36,0914,4

51 3/4

1314,54 7/8

123,811 1/8

282,636 9/16

928,740 5,8

1031,940 1/4

1022,4 28 2 5/6

66,747

1193,81719780

1/4”=6,4m

m

a

h

mg

b

1/16”= 1,6 mm

37,5°

JØ

Dk

1/4”=6,4mm

a

h

mg

b

1/16”= 1,6 mm

37,5°

JØ

Dk

B.S. 3293

B.S. 3293

75

BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised

face

Civatalama ŞablonuDrilling Template Ring Joint Ağırlık

Weight

DNOD

inch mm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

ginchmm

Civata sayısı

Number

Iinchmm

kinchmm

pinchmm

Einchmm

Finchmm

PoundsKg

26” 26,0660,4

38 1/4

971,6

To b

e sp

ecifi

ed b

y cu

stom

er.

Müş

teri

tara

fında

n be

lirle

nir.

3 1/8

79,47 1/4

184,226 1/4

666,828 3/8

720,731 7/8

809,628 1 3/4

44,534 1/2

876,329 1/2

749,3

1/2

12,7

25/32

19,8657298

28” 28,0711,2

40 3/4

1035,13 3/8

85,77 3/4

196,928 1/4

717,630 1/2

774,733 7/8

860,428 1 3/4

44,537

939,831 1/2

800,1

1/2

12,7

25/32

19,8794360

30” 30,0762

431092,2

3 5/8

92,18 1/4

209,630 1/4

768,432 9/16

827,136 1/8

917,628 1 7/8

47,639 1/4

99733 3/4

857,3

1/2

12,7

25/32

19,8908412

32” 32,0812,8

45 1/4

1149,43 7/8

98,48 3/4

222,332 1/4

819,234 11/16

881,138 3/4

984,328 2

50,8411/2

1054,136

914,4

9/16

14,3

29/32

23,01025465

34” 34,0863,6

47 1/2

1206,54

101,69 1/8

231,834 5/16

871,536 7/8

936,640 3/4

1035,128 2

50,843 1/2

1104,938

965,2

9/16

14,3

29,32

23,01182536

36” 36,0914,4

501270,0

4 1/8

104,89 1/2

241,336 5/16

922,439

990,643

1092,232 21/8

54,046

1168,440 1/4

1022,4

9/16

14,3

29/32

23,01312595

300 lb/sq. in.

Kaynak Boyunlu Flanş,Bilezik Bağlantılı

Welding Neck Flanges,Ring Type Joint (RTJ)

400 lb/sq. in.

Kaynak Boyunlu Flanş,Bilezik Bağlantılı

Welding Neck Flanges,Ring Type Joint (RTJ)

a

h

m

g

b

1/16”= 1,6 mm

37,5°

1/16” (1,6 mm)

JØ

Dk

E

23ºR 1/16”= 1,6 mm

IØ

P

Ff1

a

h

m

g

b

1/16”= 1,6 mm

37,5°

1/16” (1,6 mm)

JØ

Dk

E

23ºR 1/16”= 1,6 mm

IØ

P

Ff1

1) f=Height of raised portion and depth of groove dimensions “E” but not covered by tolerances “E”

1)f Height of raised portion and depth of groove dimensions “E” but not covered by tolerances “E”

BoruPipe

FlanşFlange

HubGöbek Yük.

Fatura Raised

face


Weight

DNOD

inch mm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

ginchmm

Civata sayısı

Number

Iinchmm

kinchmm

pinchmm

Einchmm

Finchmm

PoundsKg

26” 26,0660,4

38 1/4

971,6

To b

e sp

ecifi

ed b

y cu

stom

er.

Müş

teri

tara

fında

n be

lirle

nir.

3 1/2

88,97 5/8

193,726 5/16

668,428 5/8

727,131 7/8

809,628 1 7/8

47,634 1/2

876,329 1/2

749,3

1/2

12,7

25/32

19,8769349

28” 28,0711,2

40 3/4

1035,13 3/4

95,38 1/8

206,428 5/16

719,230 13/16

782,733 7/8

860,428 2

50,837

939,831 1/2

800,1

1/2

12,7

25/32

19,8902409

30” 30,0762

431092,2

4101,6

8 5/8

219,130 5/16

77032 15/16

836,636 1/8

917,628 2 1/8

54,039 1/4

99733 3/4

857,3

1/2

12,7

25/32

19,81025465

32” 32,0812,8

45 1/4

1149,44 1/4

1089 1/8

231,832 3/8

822,335

889,038 3/4

984,328 2 1/8

54,0411/2

1054,136

914,4

9/16

14,3

29/32

23,01188539

34” 34,0863,6

47 1/2

1206,54 3/8

111,19 1/2

241,334 3/8

873,137 3/16

944,640 3/4

1035,128 2 1/8

54,043 1/2

1104,938

965,2

9,16

14,3

29/32

23,01340608

36” 36,0914,4

501270,0

4 1/2

114,3 9 7/8

250,836 7/16

925,539 3/8

1000,143

1092,232 2 1/8

54,046

1168,440 1/4

1022,4

9,19

14,3

29/32

23,01520689

B.S. 3293

S. 3293

76

BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised

face


Weight

DNOD

inch mm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

ginchmm

Civata sayısı

Number

Iinchmm

kinchmm

pinchmm

Einchmm

Finchmm

PoundsKg

26” 26,0660,4

401016,0

To b

e sp

ecifi

ed b

y cu

stom

er.

Müş

teri

tara

fında

n be

lirle

nir.

4 1/4

1088 3/4

222,326 7/16

671,529 7/16

747,731 7/8

809,628 2

50,836

914,429 1/2

749,3

1/2

12,7

25/32

19,8983446

28” 28,0711,2

42 1/4

1073,24 3/8

111,19 1/4

23528 1/2

723,931 5/8

803,333 7/8

860,428 2 1/8

54,038

965,231 1/2

800,1

1/2

12,7

25/32

19,81142518

30” 30,0762

44 1/2

1130,34 1/2

114,39 3/4

247,730 1/2

774,733 15/16

862,036 1/8

917,628 2 1/8

54,040 1/4

1022,433 3/4

857,3

1/2

12,7

25/32

19,81257570

32” 32,0812,8

471193,8

4 5/8

117,510 1/4

260,432 1/2

825,536 1/8

917,638 3/4

984,228 2 3/8

60,342 1/2

1079,536

914,4

9/16

14,3

29/32

23,01537697

34” 34,0863,6

491244,6

4 3/4

120,710 5/8

269,934 9/16

973,238 5/16

973,240 3/4

1035,128 2 3/8

60,344 1/2

1130,338

965,2

9,16

14,3

29/32

23,01620735

36” 36,0914,4

51 3/4

1314,54 7/8

123,811 1/6

282,636 9/16

928,740 5/8

1031,943

1092,228 2 5/8

66,747

1193,840 1/4

1022,4

9/16

14,3

29/32

23,01764800

600 lb/sq. in.

Kaynak Boyunlu Flanş, Bilezik BağlantılıWelding Neck Flanges,Ring Type Joint (RTJ)

a

h

m

g

b

1/16”= 1,6 mm

37,5°

1/16” (1,6 mm)

JØ

Dk

E

23ºR 1/16”= 1,6 mm

IØ

P

Ff1

1) f=Height of raised portion and depth of groove dimensions “E” but not covered by tolerances “E”

B.S. 3293

77

BoruPipe

FlanşFlange

HubGöbek Yük.

Fatura Raised

Face


AğırlıkWeight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

minchmm

ginchmm


Iinch mm

kinchmm

PoundsKg

26” 26,0660,4

34 1/4

87026 1/4

666,82

50,83 3/8

85,728 1/2

723,929 1/4

743 24 1 3/8

34,931 3/4

806,5236107

28” 28,0711,2

36 1/2

927,128 1/4

717,62 1/16

52,43 7/16

87,330 3/4

781,131 1/4

793,8 28 1 3/8

34,934

863,6270122

30” 30,0762

38 3/4

984,330 1/4

768,42 1/8

54,03 1/2

88,932 3/4

831,933 3/4

857,3 28 1 3/8

34,936

914,4304138

32” 32,0812,8

41 3/4

1060,532 1/4

819,22 1/4

57,23 5/8

92,135

889,035 3/4

908,1 28 1 5/8

41,338 1/2

977,9375170

34” 34,0863,6

43 3/4

1111,334 1/4

8702 5/16

58,83 11/16

93,737

939,837 3/4

958,9 32 1 5/8

41,340 1/2

1028,7405184

36” 36,0914,4

461168,4

36 1/4

920,82 3/8

60,33 3/4

95,339 1/4

99740 1/4

1022,4 32 1 5/8

41,342 3/4

1085,9464211

38” 38,0965,2

48 3/4

1238,338 1/4

971,62 3/8

60,33 3/4

95,341 3/4

1060,542 1/4

1073,2 32 1 5/8

41,345 1/4

1149,4550249

40” 40,01016,0

50 3/4

1289,140 1/4

1022,42 1/2

63,53 7/8

98,443 3/4

1111,344 1/4

1124 36 1 5/8

41,347 1/4

1200,2600272

42” 42,01066,8

531346,2

42 1/4

1073,22 5/8

66,74

101,646

1168,447

1193,8 36 1 5/8

41,349 1/2

1257,3690313

44” 44,01117,6

55 1/4

1403,444 1/4

11242 5/8

66,74

101,648

1219,249

1244,6 40 1 5/8

41,351 3/4

1314,5730331

46” 46,01168,4

57 1/4

1454,246 1/4

1174,82 11/16

68,34 1/16

103,350

1270,051

1295,4 40 1 5/8

41,353 3/4

1365,3770349

48” 48,01219,2

59 1/2

1511,348 1/4

1225,62 3/4

69,94 1/8

104,852 1/4

1327,253 1/2

1358,9 44 1 5/8

41,356

1422,4840381

150 lb/sq. in.

Geçme Göbekli FlanşSlip–on Flanges

300 lb/sq. in. Geçme Göbekli Flanş

Slip–on Flanges

mJ

g

b

1/16

” =

(1,6

mm

)

hIØ

kD

7º

BoruPipe

FlanşFlange

HubGöbek Yük.

Fatura Raised

Face


AğırlıkWeight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

g inch mm

Civata sayısı

Number

Iinchmm

kinchmm

PoundsKg

26” 26,0660,4

38 1/4

971,626 1/4

666,83 1/8

79,47 1/4

184,227 1/16

687,428 3/8

720,729 1/2

749,3 28 1 3/4

44,534 1/2

876,3552251

28” 28,0711,2

40 3/4

1035,128 1/4

717,63 3/8

85,77 3/4

196,929 1/8

739,830 1/2

774,731 1/2

800,1 28 1 3/4

44,537

939,8690313

30” 30,0762

431092,2

30 1/4

768,43 5/8

92,18 1/4

209,631 3/16

792,232 9/16

827,133 3/4

857,3 28 1 7/8

47,639 1/4

997779354

32” 32,0812,8

45 1/4

1149,432 1/4

819,23 7/8

98,48 3/4

222,333 1/4

844,634 11/16

881,136

914,4 28 250,8

41 1/2

1054,1870395

34” 34,0863,6

47 1/2

1206,534 1/4

8704

101,69 1,8

231,835 5/16

896,936 7/8

936,638

965,2 28 250,8

43 1/2

1104,91014460

36” 36,0914,4

501270,0

36 1/4

920,84 1/8

104,89 1/2

241,337 3/8

949,339

990,640 1/4

1022,4 32 2 1/8

54,046

1168,41130513

mJ

g

b

1/16” = (1,6 mm)

hIØ

kD

7º

B.S. 3293

B.S. 3293

78

BoruPipe

FlanşFlange

HubGöbek Yük.

Fatura Raised

Face


AğırlıkWeight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

g inch mm

Civata sayısı

Number

Iinchmm

kinchmm

PoundsKg

26” 26,0660,4

38 1/4

971,626 1/4

666,83 1/2

88,97 5/8

193,727 5/16

693,828 5/8

727,129 1/2

749,3 28 1 7/8

47,634 1/2

876,3650295

28” 28,0711,2

40 3/4

1035,128 1/4

717,63 3/4

95,38 1/8

206,429 3/8

746,130 13/16

782,731 1/2

800,1 28 250,8

37939,8

780354

30” 30,0762

431092,2

30 1/4

768,44

101,68 5/8

219,131 1/2

800,132 35/36

836,633 3/4

857,3 28 2 1/8

54,039 1/4

997900408

32” 32,0812,8

45 1/4

1149,432 1/4

819,24 1/4

1089 1/8

231,833 9/16

852,535

889,036

914,4 28 2 1/8

54,041 1/2

1054,11025465

34” 34,0863,6

47 1/2

1206,534 1/4

8704 3/8

111,19 1/2

241,335 5/8

904,937 3/16

944,6 38

965,2 28 2 1/8

54,043 1/2

1104,91150522

36” 36,0914,4

501270,0

36 1/4

920,84 1/2

114,39 7/8

250,837 3/4

958,839 3/8

1000,140 1/4

1022,4 32 2 1/8

54,046

1168,41325601

400 lb/sq. in.


600 lb/sq. in.


BoruPipe

FlanşFlange

HubGöbek Yük.

Fatura Raised

Face


AğırlıkWeight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

g inch mm

Civata sayısı

Number

Iinchmm

kinchmm

PoundsKg

26” 26,0660,4

401016,0

26 1/4

666,84 1/4

1088 3/4

222,327 13/16

706,529 7/16

747,729 1/2

749,3 28 250,8

36914,4

898408

28” 28,0711,2

42 1/4

1073,228 1/4

717,64 3/8

111,19 1/4

23529 15/16

760,431 5/8

803,331 1/2

800,1 28 2 1/8

54,038

965,21040472

30” 30,0762

44 1/2

1130,330 1/4

768,44 1/2

114,39 3/4

247,632 1/16

814,433 15/16

862,033 3/4

857,2 28 2 1/8

54,040 1/4

1022,31158526

32” 32,0812,8

471193,8

32 1/4

819,24 5/8

117,510 1/4

260,434 3/16

868,436 1/8

917,636

914,4 28 2 3/8

60,342 1/2

1079,51335605

34” 34,0863,6

491244,6

34 1/4

8704 3/4

120,710 5/8

269,936 5/16

922,438 5/16

973,238

965,2 28 2 3/8

60,344 1/2

1130,31436652

36” 36,0914,4

51 3/4

1314,536 1/4

920,84 7/8

123,811 1/8

282,638 7/16

976,340 5/8

1031,940 1/4

1022,4 28 2 5/8

66,747

1193,81638744

1/4”

=6,4

mm

1/4”

=6,4

mm

mJ

g

bh

IØ

kD

7º

mJ

g

bh

IØ

kD

7º

B.S. 3293

B.S. 3293

79

300 lb/sq. in.

Geçme Göbekli Flanş,Bilezik BağlantılıSlip–on Flanges,

Ring Type Joint (RTJ)

mJ

g

bh

IØ

kD

23º

R 1/16”= 1,6mm EF

P

f1)


BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised

face


Weight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

ginchmm

Civata sayısı

Number

Iinchmm

kinchmm

pinchmm

Einchmm

Finchmm

PoundsKg

26” 26,0660,4

38 1/4

971,626 1/4

666,83 1/8

79,47 1/4

184,227 1/16

687,428 3/8

720,731 7/8

809,6 28 1 3/4

44,534 1/2

876,329 1/2

749,3

1/2

12,7

25/32

19,8595270

28” 28,0711,2

40 3/4

1035,128 1/4

717,63 3/8

85,77 3/4

196,929 1/8739,8

30 1/2

774,733 7/8

860,4 28 1 3/4

44,537

939,831 1/2

800,1

1/2

12,7

25/32

19,8734333

30” 30,0762

431092,2

30 1/4

768,43 5/8

92,18 1/4

209,631 3/16

792,232 9/16

827,136 1/8

917,6 28 1 7/8

47,639 1/4

99733 3/4

857,3

1/2

12,7

25/32

19,8829376

32” 32,0812,8

45 1/4

1149,432 1/4

819,23 7/8

98,48 3/4

222,333 1/4

844,634 11/16

881,138 3/4

984,3 28 250,8

41 1/2

1054,136

914,4

9/16

14,3

29/32

23,0937425

34” 34,0863,6

47 1/2

1026,538 1/4

8704

101,69 1/8

231,835 5/16

896,936 7/8

936,640 3/4

1035,1 28 250,8

43 1/2

1104,938

965,2

9/16

14,3

29/32

23,01085492

36” 36,0914,4

501270,0

36 1/4

920,84 1/8

104,89 1/2

241,337 3/8

949,339

990,643

1092,2 32 2 1/8

54,046

1168,440 1/4

1022,4

9/16

14,3

29/32

23,01208548

400 lb/sq. in.

Geçme Göbekli Flanş,Bilezik BağlantılıSlip–on Flanges,

Ring Type Joint (RTJ)

mJ

g

bh

IØ

kD

23º

R 1/16”= 1,6mm EF

P

f1)


BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised

face


Weight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

ginchmm

Civata sayısı

Number

Iinchmm

kinchmm

pinchmm

Einchmm

Finchmm

PoundsKg

26” 26,0660,4

38 1/4

971,626 1/4

666,83 1/2

88,97 5/8

193,727 5/16

693,728 5/8

727,131 7/8

809,6 28 1 7/8

47,634 1/2

876,329 1/2

749,3

1/2

12,7

25/32

19,8670304

28” 28,0711,2

40 3/4

1035,128 1/4

717,63 3/4

95,38 1/8

206,429 3/8

746,130 13/16

782,633 7/8

860,4 28 250,8

37939,8

31 1/2

800,1

1/2

12,7

25/32

19,8802364

30” 30,0762

431092,2

30 1/4

768,44

101,68 5/8

219,131 1/2

800,132 15/16

836,636 1/8

917,6 28 2 1/8

54,039 1/4

99733 3/4

857,3

1/2

12,7

25/32

19,8924419

32” 32,0812,8

45 1/4

1149,432 1/4

819,24 1/4

1089 1/8

231,833 9/16

852,535

889,038 3/4

984,3 28 2 1/8

54,041 1/2

1054,136

914,4

9/16

14,3

29/32

23,01063482

34” 34,0863,6

47 1/2

1206,538 1/4

8704 3/8

111,19 1/2

241,335 5/8

904,937 3/16

944,640 3/4

1035,0 28 2 1/8

54,043 1/2

1104,938

965,2

9/16

14,3

29/32

23,01190540

36” 36,0914,4

501270,0

36 1/4

920,84 1/2

114,39 7/8

250,837 3/4

958,939 3/8

1000,143

1092,2 32 2 1/8

54,046

1168,440 1/4

1022,4

9/16

14,3

29/32

23,01369621

B.S. 3293

B.S. 3293

80

600 lb/sq. in.

Geçme Göbekli Flanş,Bilezik BağlantılıSlip–on Flanges, Ring Type Joint (RTJ)

mJ

g

bh

IØ

kD

23º

R 1/16”= 1,6mm EF

P

f1)


BoruPipe

FlanşFlange

Göbek ÇapıHub

Fatura Raised

face


Weight

DNOD

inchmm

Dinchmm

Jinchmm

binchmm

hinchmm

ainchmm

minchmm

ginchmm

Civata sayısı

Number

Iinchmm

kinchmm

pinchmm

Einchmm

Finchmm

PoundsKg

26” 26,0660,4

40 1016,0

26 1/4

666,84 1/4

1088 3/4

222,327 13/16

706,429 7/16

747,731 7/8

809,6 28 250,8

36914,4

29 1/2

749,3

1/2

12,7

25/32

19,8919417

28” 28,0711,2

42 1/4

1073,228 1/4

717,64 3/8

111,19 1/4

23529 15/16

760,431 5/8

803,333 7/8

860,4 28 2 1/6

54,038

965,231 1/2

800,1

1/2

12,7

25/32

19,81063482

30” 30,0762

44 1/2

1130,330 1/4

768,44 1/2

114,39 3/4

247,732 1/16

814,433 15/16

862,036 1/8

917,6 28 2 1/8

54,040 1/4

1022,433 3/4

857,3

1/2

12,7

25/32

19,81184537

32” 32,0812,8

471193,8

32 1/4

819,24 5/8

117,510 1/4

260,434 1/4

868,436 1/8

917,638 3/4

984,3 28 2 3/8

60,342 1/2

1079,536

914,4

9/16

14,3

29/32

23,01371622

34” 34,0863,6

491244,6

34 1/4

8704 3/4

120,710 5/8

269,936 5/16

922,338 5/16

973,240 3/4

1035,0 28 2 3/8

60,344 1/2

1130,338

965,2

9/16

14,3

29/32

23,01477670

36” 36,0914,4

51 3/4

1314,536 1/4

920,84 7/8

123,811 1/8

282,638 7/16

976,340 5/8

1031,943

1092,2 28 2 5/8

66,747

1193,840 1/4

1022,4

9/16

14,3

29/32

23,01684764

B.S. 3293

81

Nominal Basınç kp/cm²Nomimal Basınç N/cm²Nominal Pressure lb/sq in.

10,6104150

21,1207300

28,1276400

42,2414600

63,3621900

Flanş TipiTyp of Flange

26” ve üzeri from 26” to max. Nominal Sizes

Kaynak Boyunlu FlanşWelding Neck Flange 60” 60” 60” 60” 48”

Kaynak Boyunlu FlanşBilezik Bağlantılı (RJT)Welding Neck Flanges Ring Joint Type

- 36” 36” 36” 36”

MalzemeKullanılan çelik malzemesi, ASTM spesifikasyonları A105, A53, A106, A381, A694, A707 veya API Standartla-rında (5L ve 5LX, C max. 0,35%, C.E max. 0,50%) üretilen diğer flanş, fitting veya bağlantı elemanlarına saha kaynağı için uyumlu olmalıdır.

MaterialsThe steel used shall be suitable for field welding to other flanges, fittings or pipe manufactured under ASTM specifications A105, A53, A106, A381, A694, A707 or API Standards 5L and 5LX, Cmax. 0,35%, C.E.max. 0.50%.

ANSI B 16.47 Series AWelding Neck Flanges acc. toANSI B16.47 Series A

Nominal Sizes from 26” to 60”

MSS SP-44 is a Standard Practise for steel pipe line flanges, developed and approved by the “Manufacturers” Standardization Society of the Valve and Fittings , inc”127 Park Street N.E., Vienna, Virginia 2180 USA

General Survey

ANSI B 16.47 Series AANSI B16.47 Series A ya göreKaynak Boyunlu Flanşlar

Anma çapı 26“-60“ arası

MSS-SP-44 çelik boru hattı flanşları için, Vana ve Bağlantı Parçaları (Fitting) Üreticileri Standardizasyon Kurumu tarafından geliştirilmiş ve onaylanmış bir Standard Uygulama’dır. 127 Park Street N.E. Vienna, Virginia 2180USA

Genel Tetkik

Dimensional Tolerances

Outside diameter, 0,006 in. (1,6mm) raised face:Sizes NPS 26 and larger ± 0.08 in. (2mm)Outside diameter, 0,25 in. (6,4mm) raised face:Sizes NPS 26 and larger ± 0.04 in. (1mm)

Ölçüsel Toleranslar

Dış Çap, 0,006 inç (1,6 mm), faturalı yüzey: Anma Çapı 26“ ve üzeri ±0,08 inç (2 mm)Dış Çap, 0,25 inç (6,4 mm), faturalı yüzey: Anma Çapı 26“ ve üzeri ±0,04 inç (1 mm)

Flanş kalınlıkları

1.0 in. (25.4mm) e kadar: ±0.12 in. (3,0mm), -01,0 inç (25.4mm)-2.0 inç (50.8mm): +0,19 in. (4,8mm), -02,0 inç (50.8mm)-3.0 inç (76.2mm) : +0,31 in. (7,9mm), -03 inç (76.2mm) üzeri: +0.38 in. (9.7mm), -0

Kaynak ucu ve kaynak boyunlu flanşların anma dış çapları:26” ve üzeri +12 inç (3,0mm +0.06 inç (1,6mm

Kaynak ucu ve kaynak boyunlu flanşların anma iç çapları: 26” ve üzeri +12 inç (3,0mm +0.06 inç (1,6mm

Civata halkası çapı, +0.06 inç (1,6mm) merkezden bitişik civatadelik ucuna olan mesafe ±0.03 inç (0,8mm)Civata halkası çapı işlenmiş yüzeyin çapı arasındaki eksenel kaçıklık: 26” ve üzeri 0.06 inç (1,6mm)

Flange thickness

To 1.0 in. (25.4mm): ±0.12 in. (3,0mm), -01,0 in. (25.4mm)-2.0 in. (50.8mm): +0,19 in. (4,8mm), -02,0 in. (50.8mm)-3.0 in. (76.2mm) : +0,31 in. (7,9mm), -0Over 3.0 in. (76.2mm): +0.38 in. (9.7mm), -0

Nominal OD of welding ends and welding neck flanges:Size NPS 26” and larger +12 inç (3,0mm +0.06 inç (1,6mm

Nominal ID of welding ends of welding neck flanges: Size NPS 26” and larger +12 inç (3,0mm +0.06 inç (1,6mm

Bolt circle diameter, +0.06 inç (1,6mm) center to end of adjadent bolt holes ±0.03 inç (0,8mm)Eccentricity between bolt circle diameter and machined facing diameters: Sizes NPS 26” and larger 0.06 in. (1,6mm)

82

a= Outside Diameter of Hub (top) Kaynak uçuna kadar ki dış çap t= Nominal pipe wall thickness Boru anma et kalınlığıJ= Inside diameterİç çapm= Diameter of HubGöbek çapı

Et kalınlığı (t) için kaynak bağlantısı 4,8mm den 22,2mm’ye kadar.Bevel for wall thicknesses (t) 0.19” to 0.88 inclusive

Marking

Flanges shall be marked in accordance with ther rules established in MSS standard Practise SP-25 Standard Marking System for Valves, Fittings, Flanges, and Unions. In addition the letters, “PL” shall precede the grade symbol of marking.

Kaynak Boyunlu FlanşlarWelding Neck Flanges150 lb/sq. in.

ANSI B 16.47

Series A

a Ø

0.06” ± 0.03”(1,6 mm ± 0,8 mm)

371/2 ±2 1/2°

37 1/2° 2 1/2

0.06” ± 0,03”

J

10° ± 1°

t

J

m

Slope 1: 3 (max)Slope 1: 3 (max)

t

1.6 ± 0,8mm

a Ø

m0,75”=19mm

0,12”=3,0mm

Slope 1: 3 (max)

Et kalınlığı (t) için kaynak bağlantısı 22,2 mm den büyük.Bevel for wall thicknesses (t) greater than 0.88”

İşaretleme

Vanalar, fittingler, flanşlar ve rakorlar, MSS Standard Uygulaması SP-25'de (Vana, fitting, flanş ve rakorlar için geçerli işaretleme standardı) yer alan kurallara göre işaretlenmelidir. İlave olarak “PL” harfleri, işaretleme sembollerinin önünde yer almalıdır.

83

Boru Pipe

H1

Flange Dimensions Hub ø DrillingRaiced

FaceDiaR

Fillet Radius

min.

A

Approx.Weight

~

OD of Flange

O

Thickof

FlangeC

LengthThruHub

Y

ODLarge End

HubX

No of BoltHoles

Dia ofBolt Holes

Dia ofBolt Circle

Boru çapı

inçmm

Flanş Göbek çapıinç

mm

Civatalama Fatura yüzey çapı

in.mm

K. BoyunluWN

Pounds kg

Kör FlanşBL

Pounds kg

Dış çap inç

mm

Kalınlık inç mm

Göbek yüks.

inç mm

civata delik sayısı

civata delik çapı

civatalar daire çapı

12,00323,8

19,00482,6

1,2531,8

4,50114,3

14,38365,3 12 1,00

25,417,00431,8

15,00381,0

0,389,7

8037

9543

14,00355,6

21,00533,4

1,3835,1

5,00127,0

15,75400,1 12 1,12

28,418,75476,3

16,25412,8

0,389,7

10748

12858

16,00406,4

23,50596,6

1,4436,6

5,00127,0

18,00457,2 16 1,12

28,421,25539,8

18,50469,9

0,389,7

13461

16776

18,00457,2

25,00635,0

1,5639,6

5,50139,7

19,88505,0 16 1,25

31,822,75577,9

21,00533,4

0,389,7

15168

20694

20,00508,0

27,50698,5

1,6942,9

5,69144,5

22,00558,8 20 1,25

31,825,00635,0

23,00584,2

0,389,7

18685

269122

22,00558,8

29,50749,3

1,8146,0

5,88149,4

24,00609,6 20 1,38

35,127,25692,2

25,25641,4

0,389,7

21999

339154

24,00609,6

32,00812,8

1,8847,8

6,00152,4

26,12663,4 20 1,38

35,129,50749,3

27,25692,2

0,389,7

253115

408185

26,00660,4

34,25870,0

2,6968,3

4,75120,7

26,62676,1 24 1,38

35,131,75806,5

29,50749,3

0,389,7

324147

675306

28,00711,2

36,50927,1

2,8171,4

4,94125,5

28,62726,9 28 1,38

35,134,00863,6

31,50800,1

0,4411,2

360163

800363

30,00762,0

38,75984,3

2,9474,7

5,38136,7

30,75781,1 28 1,38

35,136,00914,4

33,75857,3

0,4411,2

419190

948430

32,00812,8

41,751060,5

3,1880,8

5,69144,5

32,75831,9 28 1,62

41,138,50977,9

36,00914,4

0,4411,2

525238

1184537

34,00863,6

43,751111,3

3,2582,6

5,88149,4

34,75882,7 32 1,62

41,140,50

1028,738,00965,2

0,5012,7

562255

1323600

36,00914,4

46,001168,4

3,5690,4

6,19157,2

36,75933,5 32 1,62

41,142,75

1085,940,25

1022,40,5012,7

665302

1609730

38,00965,2

48,751238,3

3,4487,4

6,19157,2

39,00990,6 32 1,62

41,145,25

1149,442,52

1073,30,5012,7

754342

1748792

40,001016,0

50,751289,1

3,5690,4

6,44163,6

41,001041,4 36 1,62

41,147,25

1200,244,25

1124,00,5012,7

807366

1968893

42,001066,8

53,001346,2

3,8196,8

6,75171,5

43,001092,2 36 1,62

41,149,50

1257,347,00

1193,80,5012,7

924419

23031044

44,001117,6

55,251403,4

4,00101,6

7,00177,8

45,001143,0

40 1,6241,1

51,751314,5

49,001244,6

0,5012,7

1012459

26231190

46,001168,4

57,251454,2

4,06103,1

7,31185,1

47,121196,8 40 1,62

41,153,75

1365,351,00

1295,40,5012,7

1102500

28641299

48,001219,2

59,501511,3

4,25108,0

7,56191,3

49,121247,6 44 1,62

41,156,00

1422,453,50

1358,90,5012,7

1217552

32401470

50,001270,0

61,751568,5

4,38111,3

8,00203,2

51,251301,8 44 1,88

47,858,25

1479,655,50

1409,70,5012,7

1305592

35601615

52,001320,8

64,001625,6

4,56115,8

8,25209,6

53,251352,6 44 1,88

47,860,50

1536,757,50

1460,50,5012,7

1455660

40061817

54,001371,6

66,251682,6

4,75120,7

8,50215,9

55,251403,4 44 1,88

47,862,75

1593,959,50

1511,30,5012,7

1600726

44782031

56,001422,6

68,751746,3

4,88124,0

9,00228,6

57,381457,5 48 1,88

47,865,00

1651,062,00

1574,80,5012,7

1775805

49472244

58,001473,2

71,001803,4

5,06128,5

9,25235,0

59,381508,3 48 1,88

47,867,25

1708,264,00

1625,60,5012,7

1949884

54922491

60,001524,0

73,001854,2

5,19131,8

9,44239,8

61,381559,1 52 1,88

47,869,25

1759,066,00

1676,40,5012,7

2050930

59462697

Kaynak Boyunlu Flanşlar RTJWelding Neck Flanges

B16.47 SERIES A

Sınıf 150 lb/sq. in.

B1 =

H1

- (Ka

ynak

ağz

ı et k

alın

lığı x

2)

1,6mm

X

R

C

H1

B1

AY

O

C

84

Boru Pipe

H1

Flange Dimensions Hub ø Drilling Approx.Weight

Ağırlık~

OD of flange

O

Thick of Flange LengththruHub

Y

ODLarge End

HubX

No. of Bolt Holes

Dia.of Bolt Holes

Dia of Bolt Circle

Weld NeckC

Bld FlangeE

Boru çapı

inçmm

Flanş Boyutları Toplam Yükseklik

inçmm

Göbek çapıinç

mm

Civatalama Kaynak Boyunlu

WNPounds

kg

Kör Flanş

BLPounds

kg

Dış çap inç

mm

Kaynak Boy. inç mm

Kör Flanşinç

mm


civata delik çapı


12,00323,8

20,50520,7

2,0050,8

2,0050,8

5,12130,0

14,75374,7 16 1,25

31,81775450,9

13662

17479

14,00355,6

23,00584,2

2,1253,8

2,1253,8

5,62142,7

16,75425,5 20 1,25

31,820,25514,4

18986

231105

16,00406,4

25,50647,7

2,2557,2

2,2557,2

5,75146,1

19,00482,6 20 1,38

35,122,50571,5

234106

302137

18,00457,2

28,00711,2

2,3860,5

2,3860,5

6,25158,8

21,00533,4 24 1,38

35,124,75628,7

289131

386175

20,00508,0

30,50774,7

2,5063,5

2,5063,5

6,38162,1

23,12587,2 24 1,38

35,127,00685,8

348158

487221

22,00558,8

33,00838,2

2,6266,5

2,6266,5

6,50165,1

25,25641,4 24 1,62

41,129,25743,0

427194

617280

24,00609,6

36,00914,4

2,7569,9

2,7569,9

6,62168,1

27,62701,5 24 1,62

41,132,00812,8

507230

747339

26,00660,4

38,25971,6

3,1279,2

3,3184,1

7,25184,2

28,38720,9 28 1,75

44,534,50876,3

606275

1014460

28,00711,12

40,751035,1

3,3885,9

3,5690,4

7,75196,9

30,50774,7 28 1,75

44,537,00939,8

750340

1248566

30,00762,0

43,001092,2

3,6291,9

3,7595,3

8,25209,6

32,56827,0 28 1,88

47,839,25997,0

858389

1462663

32,00812,8

45,251149,4

3,8898,6

3,94100,1

8,75222,3

34,69881,1 28 2,00

50,841,50

1054,1966438

1697770

34,00863,6

47,501206,5

4,00101,6

4,12104,6

9,12231,6

36,88936,8 28 2,00

50,843,50

1104,91098498

1971894

36,00914,4

50,001270,0

4,12104,6

4,38111,3

9,50241,3

39,00990,6 32 2,12

53,846,00

1168,41241563

22941040

38,00965,2

46,001168,4

4,25108,0

4,25108,0

7,12180,8

39,12993,6 32 1,62

41,143,00

1092,2677307

1922872

40,001016,0

48,751238,3

4,50114,3

4,50114,3

7,62193,5

41,251047,8 32 1,75

44,545,50

1155,7820372

22821035

42,001066,8

50,751289,1

4,69119,1

4,69119,1

7,88200,2

43,251098,6 32 1,75

44,547,50

1206,5902409

25871173

44,001117,6

53,251352,6

4,88124,0

4,88124,0

8,12206,2

45,251149,4 32 1,88

47,849,75

1263,71023464

29541340

46,001168,4

55,751416,1

5,06128,5

5,06128,5

8,50215,9

47,381203,5 28 2,00

50,852,00

1320,81199544

35271600

48,001219,2

57,751466,9

5,25133,4

5,25133,4

8,81222,9

49,381254,3 32 2,00

50,854,00

1371,61250567

37481700

50,001270,0

60,251530,4

5,50139,7

5,50139,7

9,12231,6

51,381305,1 32 2,12

53,856,25

1428,81417643

42681936

52,001320,8

62,251581,2

5,69144,5

5,69144,5

9,38238,2

53,381355,9 32 2,12

53,858,25

1479,61530694

47242143

54,001371,6

65,251657,4

6,00152,4

6,00152,4

9,94252,5

55,501409,7 28 2,38

60,561,00

1549,41834832

54802486

56,001422,4

67,251708,2

6,06153,9

6,06153,9

10,25260,4

57,621463,5 28 2,38

60,563,00

1600,21944882

58952674

58,001473,2

69,251759,0

6,25158,8

6,25158,8

10,50266,7

59,621514,3 32 2,38

60,565,00

1651,02046928

64222913

60,001524,0

71,251809,8

6,44163,6

6,44163,6

10,75273,1

61,621565,1 32 2,38

60,567,00

1701,82180989

70193184


B16.47 SERIES A


1,6mm

X

R

C

H1

B1

AY

O

C

B1 =

H1

- (Ka

ynak

ağz

ı et k

alın

lığı x

2)

85

Boru Pipe

H1

RaisedFaceDia.

R

FilletRadius(min)

A

Facing DimensionsGroove

Fillet Radius

r

Ring Type JointFacing

Dia.K

Depth of Groove

L

PitchDia.

P

Width of Groove

D

Ring No.

A

Boru çapıinç

mm

Fatura Çapı inç

mm

Çapinç

mm

RJT-Nut / Kanal Boyutları Çap (r)inç

mmFatura Çapı

inç mmDerinlik inç mm

AdımÇapı inç mm

Kanal Genişlik inç mm

Kanal No.

12,00232,8

15,00381,0

0,389,7

16,25412,8

0,317,9

15,00381,0

0,4711,9 R57 0,03

0,814,00355,6

16,25412,8

0,389,7

18,00457,2

0,317,9

16,50419,1

0,4711,9

R61 0,030,8

16,00406,4

18,50469,9

0,389,7

20,00508,0

0,317,9

18,50469,9

0,4711,9 R65 0,03

0,818,00457,2

21,00533,4

0,389,7

22,62574,5

0,317,9

21,00533,4

0,4711,9 R69 0,03

0,820,00508,0

23,00584,2

0,389,7

25,00635,0

0,389,5

23,00584,2

0,5313,5 R73 0,06

1,0522,00558,8

25,25641,4

0,389,7

27,00685,8

0,4411,1

25,00635,0

0,5915,1 R81 0,06

1,524,00609,6

27,25692,2

0,389,7

29,50749,3

0,4411,1

27,25692,2

0,6616,7 R77 0,06

1,526,00660,4

29,50749,3

0,389,7

31,88809,8

0,5012,7

29,50749,3

0,7819,8 R93 0,06

1,528,00711,2

31,50800,1

0,4411,2

33,88860,6

0,5012,7

31,50800,1

0,7819,8 R94 0,06

1,530,00762,0

33,75857,3

0,4411,2

36,12917,4

0,5012,7

33,75857,3

0,7819,8 R95 0,06

1,532,00812,8

36,00914,4

0,4411,2

38,75984,3

0,5614,3

36,00914,4

0,9123,0 R96 0,06

1,534,00863,6

38,00965,2

0,5012,7

40,751035,1

0,5614,3

38,00965,2

0,9123,0 R97 0,06

1,536,00914,4

40,251022,4

0,5012,7

43,001092,2

0,5614,3

40,251022,4

0,9123,0 R98 0,06

1,538,00965,2

40,501028,7

0,5012,7

40,001016,0

42,751085,9

0,5012,7

42,001066,8

44,751136,7

0,5012,7

44,001117,6

47,001193,8

0,5012,7

46,001168,4

49,001244,6

0,5012,7

48,001219,2

51,251301,8

0,5012,7

50,001270,0

53,501358,9

0,5012,7

52,001320,8

55,501409,7

0,5012,7

54,001371,6

57,751466,9

0,5012,7

56,001422,4

59,751517,7

0,5012,7

58,001473,2

62,001574,8

0,5012,7

60,001524,00

64,001625,6

0,5012,7


B16.47 SERIES A


B1 =

H1

- (Ka

ynak

ağz

ı et k

alın

lığı x

2)

H1X

B1

A

P

C

OK

L23º

DL

Y

D

L E

23°

r

L

86


B16.47 SERIES A


Boru Pipe

H1


Ağırlık~

OD of flange

O


Y

ODLarge End

HubX

No. of Bolt Holes

Dia.of Bolt Holes

Dia of Bolt Circle

Weld NeckC

Bld FlangeE

Boru çapı

inçmm


inçmm

Göbek çapıinç

mm


WNPounds

kg

Kör Flanş

BLPounds

kg

Dış çap inç

mm

Kaynak Boy. inç mm

Kör Flanşinç

mm


civata delik çapı


12,00323,8

20,50520,7

2,2557,2

2,2557,2

5,38136,7

14,75374,7 16 1,38

35,117,75450,9

15370

20894

14,00355,6

23,00584,2

2,3860,5

2,3860,5

5,88149,4

16,75425,5 20 1,38

35,120,25514,4

21096

273124

16,00406,4

25,50647,7

2,5063,5

2,5063,5

6,00152,4

19,00482,6 20 1,50

38,122,50571,5

260118

357162

18,00457,2

28,00711,2

2,6266,5

2,6266,5

6,50165,1

21,00533,4 24 1,50

38,124,75628,7

319145

452205

20,00508,0

30,50774,7

2,7569,9

2,7569,9

6,62168,1

23,12587,2 24 1,62

41,127,00685,8

381173

560254

22,00558,8

33,00838,2

2,8873,2

2,8873,2

6,75171,5

25,25641,4 24 1,75

44,529,25743,0

465211

705320

24,00609,6

36,00914,4

3,0076,2

3,0076,2

6,88174,8

27,62701,5 24 1,88

47,832,00812,8

549249

850386

26,00660,4

38,25971,6

3,5088,9

3,8898,6

7,62193,5

28,62726,9 28 1,88

47,834,50876,3

670304

1177534

28,00711,2

40,751035,1

3,7595,3

4,12104,6

8,12206,2

30,81782,6 28 2,00

50,837,00939,8

798362

1423645

30,00762,0

43,001092,2

4,00101,6

4,38111,3

8,62218,9

32,94836,7 28 2,12

53,829,25997,0

915415

1675760

32,00812,8

45,251149,4

4,25108,0

4,56115,8

9,12231,6

35,00889,0 28 2,12

53,841,50

1054,11054478

1951885

34,00863,6

47,501206,5

4,38111,3

4,81122,2

9,50241,3

37,19944,6 28 2,12

53,843,50

1104,91186538

22821035

36,00914,4

50,001270,0

4,50114,3

5,06128,5

9,88251,0

39,381000,3 32 2,12

53,846,00

1168,41331604

26561205

38,00965,2

47,501206,5

4,88124,0

4,88124,0

8,12206,2

39,501003,3 32 1,88

47,844,00117,6

895406

23261055

40,001016,0

50,001270,0

5,12130,0

5,12130,0

8,50215,9

41,501054,1 32 2,00

50,846,25

1174,81043473

27091229

42,001066,8

52,001320,8

5,25133,4

5,52133,4

8,81223,8

43,621107,9 32 2,00

50,848,25

1225,61131513

30111366

44,001117,6

54,501384,3

5,50139,7

5,50139,7

9,19233,4

45,621158,7 32 2,12

53,850,50

1282,71292586

34591569

46,001168,4

56,751441,5

5,75146,1

5,75146,1

9,62244,3

47,751212,9 36 2,12

53,852,75

1339,91429648

39151776

48,001219,2

59,501511,3

6,00152,4

6,00152,4

10,12256,0

49,881267,0 28 2,38

60,555,25

1403,41693768

45042043

50,001270,0

61,751568,5

6,19157,2

6,25158,8

10,56268,2

52,001320,8 32 2,38

60,557,50

1460,51834832

50572294

52,001320,8

63,751619,3

6,38162,1

6,44163,6

10,88276,4

54,001371,6 32 2,38

60,559,50

1511,31977897

55112500

54,001371,6

67,001701,8

6,69169,9

6,75171,5

11,38289,1

56,121425,4 28 2,62

66,562,25

1581,223941086

6393 2900

56,001422,4

69,001752,6

6,88174,8

6,94176,3

11,75298,5

58,251479,6 32 2,62

66,564,25

1632,025111139

69973174

58,001473,2

71,001803,4

7,00177,8

7,12180,8

12,06306,3

60,251530,4 32 2,62

66,566,25

1682,826631208

76323462

60,001524,0

74,251886,0

7,31185,7

7,44189,0

12,56319,0

62,381584,5 32 2,88

73,269,00

1752,631051408

86873940

1,6mm

X

R

C

H1

B1

AY

O

C

B1 =

H1

- (Ka

ynak

ağz

ı et k

alın

lığı x

2)

87


B16.47 SERIES A


Boru Pipe

H1

RaisedFaceDia.

R

FilletRadius(min)

A


Fillet Radius

r


Dia.K

Depth of Groove

L

PitchDia.

P

Width of Groove

D

Ring No.

A

Boru çapıinç

mm

Fatura Çapı inç

mm

Çapinç

mm


mmFatura Çapı


AdımÇapı inç mm


Kanal No.

12,00232,8

15,00381,0

0,4411,2

16,25412,8

0,317,9

15,00381,0

0,4711,9 R57 0,03

0,814,00355,6

16,25412,8

0,4411,2

18,00457,2

0,317,9

16,50419,1

0,4711,9

R61 0,030,8

16,00406,4

18,50469,9

0,4411,2

20,00508,0

0,317,9

18,50469,9

0,4711,9 R65 0,03

0,818,00457,2

21,00533,4

0,4411,2

22,62574,5

0,317,9

21,00533,4

0,4711,9 R69 0,03

0,820,00508,0

23,00584,2

0,4411,2

25,00635,0

0,389,5

23,00584,2

0,5313,5 R73 0,06

1,0522,00558,8

25,25641,4

0,4411,2

27,00641,4

0,4411,1

25,00635,0

0,5915,1 R81 0,06

1,524,00609,6

27,25692,2

0,4411,2

29,50749,3

0,4411,1

27,25692,2

0,6616,7 R77 0,06

1,526,00660,4

29,50749,3

0,4411,2

31,88809,8

0,5012,7

29,50749,3

0,7819,8 R93 0,06

1,528,00711,2

31,50800,1

0,5012,7

33,88860,6

0,5012,7

31,50800,1

0,7819,8 R94 0,06

1,530,00762,0

33,75857,3

0,5012,7

36,12917,4

0,5012,7

33,75857,3

0,7819,8 R95 0,06

1,532,00812,0

36,00914,4

0,5012,7

38,75984,3

0,5614,3

36,00914,4

0,9123,0 R96 0,06

1,534,00863,6

38,00965,2

0,5614,2

40,751035,1

0,5614,3

38,00965,2

0,9123,0 R97 0,06

1,536,00914,4

40,251022,4

0,5614,2

43,001092,2

0,5614,3

40,251022,4

0,9123,0 R98 0,06

1,538,00965,2

40,751035,1

0,5614,2

40,001016,0

43,001092,2

0,5614,2

42,001066,8

45,001143,0

0,5614,2

44,001117,6

47,251200,2

0,5614,2

46,001168,4

49,501257,3

0,5614,2

48,001219,2

51,501308,1

0,5614,2

50,001270,0

53,621361,9

0,5614,2

52,001320,8

55,621412,7

0,5614,2

54,001371,6

57,881470,2

0,5614,2

56,001422,4

60,12 1527,0

0,5614,2

58,001473,2

62,121577,8

0,5614,2

60,001524,00

64,381655,3

0,5614,2

H1X

B1

A

P

C

OK

L23º

DL

Y

D

L E

23°

r

LB1

= H

1 - (

Kayn

ak a

ğzı e

t kal

ınlığ

ı x 2

)

88


B16.47 SERIES A


Boru Pipe

H1


Ağırlık~

OD of flange

O


Y

ODLarge End

HubX

No. of Bolt Holes

Dia.of Bolt Holes

Dia of Bolt Circle

Weld NeckC

Bld FlangeE

Boru çapı

inçmm


inçmm

Göbek çapıinç

mm


WNPounds

kg

Kör Flanş

BLPounds

kg

Dış çap inç

mm

Kaynak Boy. inç mm

Kör Flanşinç

mm


civata delik çapı


12,00323,8

22558,8

2,6266,5

2,6266,5

6,12155,4

15,75400,1 20 1,38

35,119,25489

227103

273124

14,00355,6

23,75603,3

2,7569,9

2,7569,9

6,5165,1

17431,8 20 1,5

38,120,75527,1

269122

333151

16,00406,4

27685,8

376,2

376,2

7177,8

19,5495,3 20 1,62

41,123,75603,3

374170

471214

18,00457,2

29,25743

3,2582,6

3,2582,6

7,25184,2

21,5546,1 20 1,75

44,525,75654,1

449204

599272

20,00508,0

32812,8

3,588,9

3,588,9

7,5190,5

24609,6 24 1,75

44,528,5

723,9560254

769349

22,00558,8

34,25870

3,7595,3

3,7595,3

7,75196,9

26,25666,8 24 1,88

47,830,62777,7

675306

971440

24,00609,6

37939,8

4101,6

4101,6

8203,2

28,25717,6 24 2

50,833

838,2789358

1174533

26,00660,4

401016

4,25108

4,94125,5

8,75222,3

29,44747,8 28 2

50,836

914,4941427

1631740

28,00711,2

42,251073,2

4,38111,3

5,19131,8

9,25235

31,62803,1 28 2,12

53,838

965,21056479

1916869

30,00762,0

44,51130,3

4,5114,3

5,5139,7

9,75247,7

33,94862,1 28 2,12

53,840,25

1022,41201545

22711030

32,00812,8

471193,8

4,62117,3

5,81147,6

10,25260,4

36,12917,4 28 2,38

60,542,5

1079,51345610

26541204

34,00863,6

491244,6

4,75120,7

6,06153,9

10,62269,7

38,31973,1 28 2,38

60,544,5

1130,31468666

30231371

36,00914,4

51,751314,5

4,88124

6,38162,1

11,12282,4

40,621031,7 28 2,62

66,547

1193,81664755

35271600

38,00965,2

501270

6152,4

6,12155,4

10254

40,251022,4 28 2,38

60,545,75

1162,11411640

31901447

40,001016,0

521320,8

6,25158,8

6,38162,1

10,38263,7

42,251073,2 32 2,38

60,547,75

1212,91506683

35711620

42,001066,8

55,251403,4

6,62168,1

6,75171,5

11279,4

44,381127,3 28 2,62

66,550,5

1282,71662754

42941948

44,001117,6

57,251454,2

6,81173

7177,8

11,38289,1

46,51181,1 32 2,62

66,552,5

1333,51990903

46302100

46,001168,4

59,51511,3

7,06179,3

7,31185,7

11,81300

48,621234,9 32 2,62

66,554,75

1390,723231054

54012450

48,001219,2

62,751593,9

7,44189

7,69195,3

12,44314,7

50,751289,1 32 2,88

73,257,5

1460,526451200

62832850

50,001270,0

65,751670,1

7,75196,9

8203,2

12,94328,7

52,881343,2 28 3,12

79,260

152430051363

71273233

52,001320,8

67,751720,9

8203,2

8,25209,6

13,25336,6

54,881394 32 3,12

79,262

1574,832321466

78703570

54,001371,6

701778

8,25209,6

8,56217,4

13,75349,3

571447,8 32 3,12

79,264,251632

35381605

87473968

56,001422,4

73,001854,2

8,56217,4

8,88225,6

14,25362,0

59,121501,6 32 3,38

85,966,75

1695,537671709

98104450

58,001473,2

75,001905,0

8,75222,3

9,12231,6

14,56369,8

61,121552,4 32 3,38

85,968,75

1746,342241916

106924850

60,001524,0

78,501993,9

9,19233,4

9,56242,8

15,31388,9

63,381609,9 28 3,62

91,971,75

1822,550702300

123195588

1,6mm

X

R

C

H1

B1

AY

O

C

B1 =

H1

- (Ka

ynak

ağz

ı et k

alın

lığı x

2)

89


B16.47 SERIES A


Boru Pipe

H1

RaisedFaceDia.

R

FilletRadius(min)

A


Fillet Radius

r


Dia.K

Depth of Groove

L

PitchDia.

P

Width of Groove

D

Ring No.

A

Boru çapıinç

mm

Fatura Çapı inç

mm

Çapinç

mm


mmFatura Çapı


AdımÇapı inç mm


Kanal No.

12,00323,8

15,00381,0

0,4411,2

16,25412,8

0,317,9

15,00381,0

0,4711,9 R57 0,03

0,814,00355,6

16,25412,8

0,4411,2

18,00457,2

0,317,9

16,50419,1

0,4711,9 R61 0,03

0,816,00406,4

18,50469,9

0,4411,2

20,00508,0

0,317,9

18,50469,9

0,4711,9 R65 0,03

0,818,00457,2

21,00533,4

0,4411,2

22,62574,5

0,317,9

21,00533,4

0,4711,9 R69 0,03

0,820,00508,0

23,00584,2

0,4411,2

25,00635,0

0,389,5

23,00584,2

0,5313,5 R73 0,06

1,522,00558,8

25,25641,4

0,4411,2

27,00641,4

0,4411,1

25,00635,0

0,5915,1 R81 0,06

1,524,00609,6

27,25692,2

0,4411,2

29,50749,3

0,4411,1

27,25692,2

0,6616,7 R77 0,06

1,526,00660,4

29,50749,3

0,5012,7

31,88809,8

0,5012,7

29,50749,3

0,7819,8 R93 0,06

1,528,00711,2

31,50800,1

0,5012,7

33,88860,6

0,5012,7

31,50800,1

0,7819,8 R94 0,06

1,530,00762,0

33,75857,3

0,5012,7

36,12917,4

0,5012,7

33,75857,3

0,7819,8 R95 0,06

1,532,00812,0

36,00914,4

0,5012,7

38,75984,3

0,5614,3

36,00914,4

0,9123,0 R96 0,06

1,534,00863,6

38,00965,2

0,5614,2

40,751035,1

0,5614,3

38,00965,2

0,9123,0 R97 0,06

1,536,00914,4

40,251022,4

0,5614,2

43,001092,2

0,5614,3

40,251022,4

0,9123,0 R98 0,06

1,538,00965,2

41,501054,1

0,5614,2

40,001016,0

43,751111,3

0,5614,2

42,001066,8

46,001168,4

0,5614,2

44,001117,6

48,251225,6

0,5614,2

46,001168,4

50,251276,4

0,5614,2

48,001219,2

52,501333,5

0,5614,2

50,001270,0

54,501384,3

0,5614,2

52,001320,8

56,501435,1

0,5614,2

54,001371,6

58,751492,3

0,5614,2

56,001422,4

60,751543,1

0,6215,7

58,001473,2

63,001600,2

0,6215,7

60,001524,00

65,251657,4

0,6917,5B1

= H

1 - (

Kayn

ak a

ğzı e

t kal

ınlığ

ı x 2

)

H1X

B1

A

P

C

OK

L23º

DL

Y

D

L E

23°

r

L

90


B16.47 SERIES A


Boru Pipe

H1


Ağırlık~

OD of flange

O


Y

ODLarge End

HubX

No. of Bolt Holes

Dia.of Bolt Holes

Dia of Bolt Circle

Weld NeckC

Bld FlangeE

Boru çapı

inçmm


inçmm

Göbek çapıinç

mm


WNPounds

kg

Kör Flanş

BLPounds

kg

Dış çap inç

mm

Kaynak Boy. inç mm

Kör Flanşinç

mm


civata delik çapı


12,00323,8

24,00609,6

3,1279,2

3,1279,2

7,88200,2

16,50419,1 20 1,50

38,121,00533,4

346157

381173

14,00355,6

25,25641,4

3,3885,9

3,3885,9

8,38212,9

17,75450,9 20 1,62

41,122,00558,8

379180

454206

16,00406,4

27,75704,9

3,5088,9

3,5088,9

8,50215,9

20,00508,0 20 1,75

44,524,25616,0

478217

571259

18,00457,2

31,00787,4

4,00101,6 4,00

101,69,00

228,625,25565,2 20 2,00

50,827,00685,8

643292

808367

20,00508,0

33,75857,3

4,25108,0

4,25108,0

9,75247,7

24,50622,3 20 2,12

53,829,50749,3

797362

1020463

24,00609,6

41,001041,4

5,50139,7

5,50139,7

11,50292,1

29,50749,3 20 2,62

66,535,50901,7

1465665

1930876

26,00660,4

42,751085,9

5,50139,7

6,31160,3

11,25285,8

30,50774,7 20 2,88

73,237,50952,5

1525692

23371060

28,00711,2

46,001168,4

5,62142,7

6,75171,5

11,75298,5

32,75831,9 20 3,12

79,240,25

1022,41810822

28791306

30,00762,0

48,501231,9

5,88149,4

7,18182,4

12,25311,2

35,00889,0 20 3,12

79,242,75

1085,92120962

34501565

32,00812,8

51,751314,5

6,25158,8

7,62193,5

13,00330,2

37,25946,2 20 3,38

85,945,50

1155,725451155

41561885

34,00863,6

55,001397,0

6,50165,1

8,06204,7

13,75349,3

39,621006,3 20 3,62

91,948,25

1225,629701348

49602250

36,00914,4

57,501460,5

6,75171,5

8,44214,4

14,25362,0

41,881063,8 20 3,62

91,950,75

1289,133951541

57212595

38,00965,2

57,501460,5

7,50190,5

8,50215,9

13,88352,6

42,251073,2 20 3,62

91,950,75

1289,133851537

57542610

40,001016,0

59,501511,3

7,75196,9

8,81223,8

14,31363,5

44,381127,3 24 3,62

91,952,75

1339,936201643

63272870

42,001066,8

61,501562,1

8,12206,2

9,12231,6

14,62371,3

46,311176,3 24 3,62

91,954,75

1390,739601798

70443195

44,001117,6

64,881648,0

8,44214,4

9,56242,8

15,38390,7

48,621234,9 24

3,8898,6

57,621463,5

43001952

82013720

46,001168,4

68,251733,6

8,88225,6

10,06255,5

16,18411,0

50,881292,4 24 4,12

104,660,50

1536,746402107

100954579

48,001219,2

70,251784,4

9,19233,4

10,38263,7

16,50417,5

52,881343,2 24 4,12

104,662,50

1587,549802260

104284730

1,6mm

X

R

C

H1

B1

AY

O

C

B1 = H1 - (Kaynak ağzı et kalınlığı x 2)

91


B16.47 SERIES A


Boru Pipe

H1

RaisedFaceDia.

R

FilletRadius(min)

A


Fillet Radius

r


Dia.K

Depth of Groove

L

PitchDia.

P

Width of Groove

D

Ring No.

A

Boru çapıinç

mm

Fatura Çapı inç

mm

Çapinç

mm


mmFatura Çapı


AdımÇapı inç mm


Kanal No.

12,00323,8

15,00381,0

0,4411,2

16,50419,1

0,317,9

15,00381,0

0,4711,9 R57 0,03

0,814,00355,6

16,25412,8

0,4411,2

18,38466,9

0,4411,1

16,50419,1

0,6616,7 R62 0,06

1,516,00406,4

18,50469,9

0,4411,12

20,62523,7

0,4411,1

18,50469,9

0,6616,7 R66 0,06

1,518,00457,2

21,00533,4

0,4411,2

23,28539,9

0,5012,7

21,00533,4

0,7819,8 R70 0,06

1,520,00508,0

23,00584,2

0,4411,2

25,50647,7

0,5012,7

23,00584,2

0,7819,8 R74 0,06

1,524,00609,6

27,25692,2

0,4411,2

30,38771,7

0,6315,9

27,25692,2

1,0627,0 R78 0,09

2,326,00660,4

29,50749,3

0,4411,2

32,75831,9

0,6917,5

29,50749,3

1,1930,2

R100 0,092,3

28,00711,2

31,50800,1

0,5012,7

35,00889,0

0,6917,5

31,50800,1

1,3133,3 R101 0,09

2,330,00762,0

33,75857,3

0,5012,7

37,25946,2

0,6917,5

33,75857,3

1,3133,3 R102 0,09

2,332,00812,8

36,00914,4

0,5012,7

39,501003,3

0,6917,5

36,00914,4

1,3133,3 R103 0,09

2,334,00863,6

38,00965,2

0,5614,2

42,001066,8

0,8120,6

38,00965,2

1,4436,5 R104 0,09

2336,00914,4

40,251022,4

0,5614,2

44,251124,0

0,8120,6

40,251022,4

1,4436,5 R105 0,09

2,338,00965,2

43,251098,6

0,7519,1

40,001016,0

45,751162,1

0,8120,6

42,001066,8

47,751212,9

0,8120,6

44,001117,6

50,001270,0

0,8822,4

46,001168,4

52,501333,5

0,8822,4

48,001219,2

54,501384,3

0,9423,9

48,001219,2

52,501333,5

0,5614,2

50,001270,0

54,501384,3

0,5614,2

52,001320,8

56,501435,1

0,5614,2

54,001371,6

58751492,3

0,5614,2

56,001422,4

60,751543,1

0,5614,2

58,001473,2

63,001600,2

0,5614,2

60,001524,00

65,251657,4

0,5614,2

H1X

B1

A

P

C

OK

L23º

DL

Y

D

L E

23°

r

L

B1 = H1 - (Kaynak ağzı et kalınlığı x 2)

92

Nominal Basınç kp/cm²Nomimal Basınç N/cm²Nominal Pressure lb/sq. in.

5,35275

10,6104150

21,1207300

28,1276400

42,2414600

63,3621900

Flanş TipiTyp of Flange

26” ve üzeri from 26” to max. Nominal Sizes

Kaynak Boyunlu FlanşWelding Neck Flange 60” 60” 60” 36” 36” 36”

ANSI B 16.47 Series BWelding Neck Flanges acc. toANSI B16.47 Series B

Nominal Sizes from 26” to 60” The API-605 flanges are designed asSeries B in this standard.

General Survey

ANSI B 16.47 Series BANSI B16.47 Series B ye göreKaynak Boyunlu Flanşlar

Anma boyutları 26” den 60” e kadar Bu standartlardaki API-605 flanşları Seri B olarak dizayn edilmiş-lerdir.

Genel Tetkik

Alınlama, boyut toleransları ve işaretleme ANSI B 16.47 Standardı’na göredir.

Facings dimensional tolerances and marking in acc. to ANSI B 16.47

a Ø

0.06” ± 0.03”(1,6 mm ± 0,8 mm)

t

J

m

371/2 ±2 1/2°

Slope 1: 3 (max)Slope 1: 3 (max)

37 1/2° 2 1/2

0.06” ± 0,03”

J

10° ± 1°

t

1.6 ± 0,8mm

a Ø

m0,75”=19mm

0,12”=3,0mm

Slope 1: 3 (max)

a = Outside Diameter of Hub (top)Kaynak uçuna kadar ki dış çapt= Nominal pipe wall thicknessBoru anma et kalınlığıJ= Inside diameterİç çapm= Diameter of HubGöbek çapı

Kaynak uçları (kaynak boyunlu flanşlar)Welding ends (Welding neck flanges

Bevel for wall thicknesses (t) 0.19” to 0.88. inclusive. Et kalınlığı (t) için kaynak aralığı 4,8mm den 22,2mm’ye kadar

Bevel for wall thicknesses (t) greater than 0.88”. Et kalınlığı (t) için kaynak aralığı 22,2mm den büyük

93



B16.47 SERIES B

Boru Pipe

Flanş BoyutlarıFlange Dimensions

GöbekHub

FaturaRaiced

Face

Saplama delikleriDrilling Template


Nom.SizeDN

DışÇapODmm

Din.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

rin.

mm

gin.

mm

Civata Sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kilo

26” 26660,4

30762,0

1,3133,3

2,3158,7

26,06661,9

26,62676,1

0,317,9

27,75704,9 36 0,75

19,128,5

723,98840

28” 28,0711,2

32812,8

1,3133,3

2,4462,0

28,06712,7

28,62726,9

0317,9

29,75755,7 40 0,75

19,130,5

774,79744

30” 30762,0

34863,6

1,3133,3

2,5665,0

30,06763,5

30,62777,7

0,317,9

31,75806,5 44 0,75

19,132,5

825,510648

32” 32812,8

36814,4

1,3835,1

2,7569,9

32,06814,3

32,62828,5

0,317,9

33,75857,3

48 0,7519,1

34,5876,3

11954

34” 34863,6

38965,2

1,3835,1

2,8873,2

34,06865,1

34,62879,3

0,317,9

35,75908,1 52 0,75

19,136,5

927,113059

36” 36914,4

40,691033,5

1,4436,6

3,3885,9

36,06915,9

36,81935,0

0,389,7

38965,2 40 0,88

22,439,06992,1

17278

38” 38,00965,2

42,691084,3

1,5038,1

3,5088,9

38,06966,7

38,81985,8

0,389,7

401016,0 40 0,88

22,441,06

1042,918785

40” 40,001016,0

44,691135,1

1,5038,1

3,6291,9

40,061017,5

40,811036,6

0,389,7

421066,8 44 0,88

22,443,06

1093,720593

42” 421066,8

46,691185,9

1,5639,6

3,7595,3

42,061068,3

42,811087,4

0,389,7

441117,6 48 0,88

22,445,06

1144,5220100

44” 441117,6

49,251251,0

1,6942,9

4,12104,6

44,061119,1

44,881140,0

0,389,7

46,251174,8 36 1,00

25,447,38

1203,5249113

46” 461168,4

51,251301,8

1,7544,5

4,25108,0

46,061169,9

46,881190,8

0,389,7

48,251225,6 40 1,00

25,449,38

1254,3280127

48” 481219,2

53,251352,6

1,8146,0

4,38111,3

48,061220,7

48,881241,6

0,389,7

50,251276,4 44 1,00

25,451,38

1305,1310141

50” 50,001270,0

55,251403,4

1,8847,8

4,56115,8

50,061271,5

50,941293,9

0,389,7

52,251327,2 44 1,00

25,453,38

1355,9337153

52” 52,001320,8

57,381457,5

1,8847,8

4,75120,7

52,061322,3

52,941344,7

0,389,7

54,251378,0 48 1,00

25,455,50

1409,7352160

54” 54,001371,6

59,381508,3

1,9449,3

4,94125,5

54,061373,1

55,001397,0

0,389,7

56,251428,8 48 1,00

25,457,50

1460,5390177

56” 56,001422,4

62,001574,8

2,0050,8

5,31134,9

56,061423,9

57,121450,8

0,4411,2

58,501485,9 40 1,12

28,459,88

1521,0436198

58” 58,001473,2

64,001625,6

2,0652,3

5,44138,2

58,061474,7

59,121501,6

0,4411,2

60,501536,7 44 1,12

28,461,88

1571,8480218

60” 60,001524,0

66,001676,4

2,1955,6

5,69144,5

60,061525,5

61,121552,4

0,4411,2

62,501587,2

44 1,1228,4

63,881622,6

540245

¹) Alıcı tarafından belirlenir.¹) To be specified by Purchaser

a

bhØ

1)

1/6”=1,6mm

1/6”=1,6mm

371/2º

r

gkD

ØI

m

94



B16.47 SERIES B

Boru Pipe


GöbekHub

FaturaRaiced

Face



Nom.SizeDN

DışÇapODmm

Din.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

rin.

mm

ginç

mm

Civata Sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kilo

26” 26660,4

30,94785,9

1,6241,1

3,588,9

26,06661,9

26,94684,3

0,389,7

28711,2

36 0,8822,4

29,31744,5

13963

28” 28,0711,2

32,94836,7

1,7544,5

3,7595,3

28,06712,7

28,94735,1

0,389,7

30762,0 40 0,88

22,431,31795,3

16374

30” 30762,0

34,94887,5

1,7544,5

3,94100,1

30,06763,5

31787,4

0,389,7

32812,8 44 0,88

22,433,31846,1

17680

32” 32812,8

37,06941,3

1,8146,0

4,25108,0

32,06814,3

33,06839,7

0,389,7

34863,6 48 0,88

22,435,44900,2

20392

34” 34863,6

39,561004,8

1,9449,3

4,34110,2

34,06865,1

85,12892,0

0,389,7

36,25920,8 40 1,00

25,437,69957,3

249113

36” 36914,4

41,621057,1

2,0652,3

4,62117,3

36,06915,9

37,19944,6

0,389,7

38,25971,6 44 1,00

25,439,75

1009,7284129

38” 38,00965,2

44,251124,0

2,1253,8

4,88124,0

38,12968,2

39,25997,0

0,389,7

40,251022,4 40 1,12

28,442,12

1069,8330150

40” 40,001016,0

46,251174,8

2,1955,6

5,06128,5

40,121019,0

41,311049,3

0,389,7

42,51079,5 44 1,12

28,444,12

1120,6356162

42” 421066,8

48,251225,6

2,3158,7

5,25133,4

42,121069,8

43,381101,9

0,4411,2

44,51130,3

48 1,1228,4

46,121171,4

406184

44” 441117,6

50,251276,4

2,3860,5

5,38136,7

44,121120,6

45,381152,7

0,4411,2

46,51181,1 52 1,12

28,448,12

1222,2422192

46” 461168,4

52,811341,4

2,4462,0

5,69144,5

46,121171,4

47,441205,0

0,4411,2

48,621234,9 40 1,25

31,850,56

1284,2493224

48” 481219,2

54,811392,2

2,5665,0

5,88149,4

48,121222,2

49,51257,3

0,4411,2

50,751289,1 44 1,25

31,852,56

1335,0509231

50” 50,001270,0

56,511435,4

2,6968,3

6,06153,9

50,121273,0

51,501308,1

0,4411,2

52,751339,9 48 1,25

31,854,56

1385,8579263

52” 52,001320,8

58,811493,8

2,7569,9

6,19157,2

52,121323,8

53,561360,4

0,4411,2

54,751390,7 52 1,25

31,856,56

1436,6627285

54” 54,001371,6

61,001549,4

2,8171,4

6,38162,1

54,121374,6

55,621412,7

0,4411,2

56,751441,5 56 1,25

31,858,75

1492,3632287

56” 56,001422,4

63,001600,2

2,8873,2

6,56166,6

56,121425,4

57,691465,3

0,5614,2

58,751492,3 60 1,25

31,860,75

1543,1711323

58” 58,001473,2

65,941674,9

2,9474,7

6,88174,9

58,121476,2

59,691516,1

0,5614,2

60,751543,1 48 1,38

35,163,44

1611,4845384

60” 60,001524,0

67,941725,7

3,0076,2

7,06179,3

60,121527,0

61,811570,0

0,5614,2

63,001600,2

52 1,3835,1

65,441662,2

855388


a

bhØ

1)

1/6”=1,6mm

1/6”=1,6mm

371/2º

r

gkD

ØI

m

95



B16.47 SERIES B

Boru Pipe


GöbekHub

FaturaRaiced

Face



Nom.SizeDN

DışÇapODmm

Din.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

rin.

mm

ginç

mm

Civata Sayısı

Number

Iin.

mm

kin.

mm

~Pounds

Kilo

26” 26660,4

34,12866,6

3,588,9

5,69144,5

26,19665,2

27,62701,5

0,5614,2

29736,6 32 1,38

35,131,62803,1

399181

28” 28,0711,2

36,25920,8

3,588,9

5,88149,4

28,19716,0

29,75755,7

0,5614,2

31787,4

36 1,3835,1

33,75857,3

447203

30” 30762,0

39990,6

3,6993,7

6,22158,0

30,25768,4

32812,8

0,5614,2

33,25844,6 36 1,50

38,136,25920,8

590268

32” 32812,8

41,51054,1

4,06103,1

6,62168,1

32,25819,2

34863,6

0,6215,7

35,5901,7 32 1,62

41,138,5

977,9727330

34” 34863,6

43,621107,9

4,06103,1

6,81173,0

34,25870,0

36,12917,4

0,6215,7

37,5952,5 36 1,62

41,140,62

1031,7787357

36” 36914,4

46,121171,4

4,06103,1

7,12180,8

36,25920,8

38965,2

0,6215,7

39,751009,7 32 1,75

44,542,88

1089,2893405

38” 38,00965,2

48,121222,2

4,38111,3

7,56192,0

38,25971,6

40,001016,0

0,6215,7

41,751060,5 36 1,75

44,544,88

1140,0917416

40” 40,001016,0

50,121273,0

4,56115,8

7,81198,4

40,251022,4

421066,8

0,6215,7

43,881114,6 40 1,75

44,546,88

1190,8992450

42” 421066,8

52,51333,5

4,69119,1

8,06204,7

42,311074,7

441117,6

0,6215,7

461168,4 36 1,88

47,849

1244,61106502

44” 441117,6

54,51384,3

5127,0

8,44214,4

44,311125,5

46,191173,2

0,6215,7

481219,2 40 1,88

47,851

1295,41216552

46” 461168,4

57,51460,5

5,06128,5

8,75222,3

46,311176,3

48,381228,9

0,6215,7

501270,0 36 2,00

50,853,75

1365,31432650

48” 481219,2

59,51511,3

5,06128,5

8,81223,8

48,311227,1

50,311277,9

0,6215,7

52,251327,2 40 2,00

50,855,75

1416,11611731

50” 50,001270,0

61,501562,1

5,44138,2

9,25235,0

50,311277,9

52,381330,5

0,6215,7

54,251378,0 44 2,00

50,857,75

1466,91675760

52” 52,001320,8

63,501612,9

5,62142,7

9,56242,8

52,311328,7

54,441382,8

0,6215,7

56,251428,8 48 2,00

50,859,75

1517,71763800

54” 54,001371,6

65,881673,4

5,38136,7

9,44239,8

54,311379,5

56,501435,1

0,6215,7

58,251479,6 48 2,00

50,862,12

1577,81979898

56” 56,001422,4

69,501765,3

6,06153,9

10,56268,2

56,311430,3

58,811493,8

0,6917,5

60,501536,7 36 2,38

60,565,00

1651,025,191143

58” 58,001473,2

71,941827,3

6,06153,9

10,81274,6

58,311481,1

60,941547,9

0,6917,5

62,751593,9 40 2,38

60,567,44

1713,026821217

60” 60,001524,0

73,941878,1

5,94150,9

10,69271,5

60,311531,9

62,941598,7

0,6917,5

65,001651,0

40 2,3860,5

69,441763,8

28,901311


a

bhØ

1)

1/6”=1,6mm

1/6”=1,6mm

371/2º

r

gkD

ØI

m

96



B16.47 SERIES B

Boru Pipe


GöbekHub

FaturaRaiced

Face



Nom.SizeDN

DışÇapODmm

Din.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

rin.

mm

ginç

mm

Civata Sayısı

Number

Iin.

mm

kin.

mm

~Kilo

Pounds

26” 26660,4

33,5850,9

3,588,9

5,88149,4

26660,4

27,12688,8

0,4411,2

28711,2 28 1,5

38,130,75781,1

388176

28” 28711,2

36914,4

3,7595,3

6,25158,8

28711,2

29,12739,6

0,512,7

30762,0 24 1,62

41,133

838,2476216

30” 30762,0

38,25971,6

4101,6

6,99177,5

30762,0

31,25793,8

0,512,7

32,25819,2 28 1,62

41,135,25895,4

557253

32” 32812,8

40,751035,1

4,25108,0

7,06179,3

32812,8

33,25844,6

0,512,7

34,38873,3 28 1,75

44,537,5

952,5661300

34” 34863,6

42,751085,9

4,38111,3

7,38187,5

34863,6

35,38898,7

0,5614,2

36,5927,1 32 1,75

44,539,5

1003,3720327

36” 36914,4

45,51155,7

4,69119,1

7,88200,2

36914,4

37,5952,5

0,5614,2

38,62980,9 28 1,88

47,842

1066,8886402


a

bhØ

1)

1/6”=1,6mm

1/4”=6,4mm

371/2º

r

gkD

ØI

m

97



B16.47 SERIES B

Boru Pipe


GöbekHub

FaturaRaiced

Face



Nom.SizeDN

DışÇapODmm

Din.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

rin.

mm

ginç

mm

Civata Sayısı

Number

Iin.

mm

kin.

mm

~Kilo

Pounds

26” 26660,4

35889,0

4,38111,3

7,12180,8

26660,4

27,5698,5

0,512,7

28,62726,9 28 1,75

44,531,75806,5

588267

28” 28711,2

37,5952,2

4,56115,8

7,5190,5

28711,2

29,62752,3

0,512,7

30,88784,4 28 1,88

47,834

863,6718326

30” 30762,0

40,251022,4

4,94125,5

8,06204,7

30762,0

31,75806,5

0,512,7

33,12841,2 28 2,00

50,836,5

927,1885402

32” 32812,8

42,751085,9

5,12130,0

8,5215,9

32812,8

33,88860,6

0,512,7

35,25895,4 28 2,12

53,838,75984,3

1019462

34” 34863,6

45,751162,1

5,56141,2

9,19233,4

34863,8

36914,4

0,5614,2

37,5952,5 24 2,38

60,541,5

1054,11282582

36” 36914,4

47,751212,9

5,75146,1

9,56242,8

36914,4

38,12968,2

0,5614,2

39,751009,7 28 2,38

60,543,5

1104,91382627


a

bhØ

1)

1/6”=1,6mm

1/4”=6,4mm

371/2º

r

gkD

ØI

m

98



B16.47 SERIES B

Boru Pipe


GöbekHub

FaturaRaiced

Face



Nom.SizeDN

DışÇapODmm

Din.

mm

bin.

mm

hin.

mm

ain.

mm

min.

mm

rin.

mm

ginç

mm

Civata Sayısı

Number

Iin.

mm

kin.

mm

~Kilo

Pounds

26” 26660,4

40,251022,4

5,31134,9

10,19258,8

26660,4

29,25743,0

0,4411,2

30762,0 20 2,62

66,535,5

901,71243564

28” 28711,2

43,51104,9

5,81147,6

10,88276,4

28711,2

31,38797,1

0,512,7

32,25819,2 20 2,88

73,238,25971,6

1556706

30” 30762,0

46,51181,1

6,12155,4

11,38289,1

30762,0

33,5850,9

0,512,7

34,5876,3 20 3,12

79,240,75

1035,11835833

32” 32812,8

48,751238,3

6,31160,3

11,94303,3

32812,8

35,75908,1

0,512,7

36,5927,1 20 3,12

79,243

1092,22025919

34” 34863,6

51,751314,5

6,75171,5

12,56319,0

34863,6

37,88962,2

0,5614,2

39990,6 20 3,38

85,945,5

1155,724351105

36” 36914,4

531346,2

6,81173,0

12,81325,4

36914,4

401016,0

0,5614,2

40,51028,7 24 3,12

79,247,25

1200,224761124


a

bhØ

1)

1/6”=1,6mm

1/4”=6,4mm

371/2º

r

gkD

ØI

m

99

ASME B 16.5

BoyutDiameter

O N A B Cmini

R Civatalama ŞablonuDrilling Template

DN Sizeinç

mm mm mm mm mm mm Number Gmm

dmm

15 1/2 89

Uzu

nluk

alıc

ı tar

afın

dan

belir

leni

r (öz

ellik

le fa

tura

lı al

ın).

Leng

th to

be

spec

ified

by

purc

hase

r (in

clud

ing

rais

ed fa

ce).

30,5 12,7 11,2 34,9 4 60,3 15,8

20 3/4 99 38,0 19,0 12,7 42,9 4 69,8 15,8

25 1 108 51,0 25,4 14,3 50,8 4 79,4 15,8

32 1 1/4 117 60,5 31,8 15,7 63,5 4 88,9 15,8

40 1 1/2 127 67,0 38,1 17,5 73,0 4 98,4 15,8

50 2 152 82,5 50,8 19,1 92,1 4 120,6 19,0

65 2 1/2 178 95,5 63,5 22,3 104,8 4 139,7 19,0

80 3 190 108,0 76,2 23,9 127,0 4 152,4 19,0

– 3 1/2 216 124,0 88,9 23,9 139,7 8 177,8 19,0

100 4 229 140,0 101,6 23,9 157,2 8 190,5 19,0

125 5 254 165,0 127,0 23,9 185,7 8 215,9 22,2

150 6 279 197,0 152,4 25,4 215,9 8 241,3 22,2

200 8 343 248,0 203,2 28,5 269,9 8 298,4 22,2

250 10 406 305,0 254,0 30,2 323,8 12 362,0 25,4

300 12 483 365,0 304,8 31,8 381,0 12 431,8 25,4

350 14 533 406,5 355,6 35,0 412,8 12 476,2 28,5

400 16 597 457,0 406,4 36,6 469,9 16 539,8 28,5

450 18 635 508,0 457,2 39,7 533,4 16 577,8 31,8

500 20 698 559,0 508,0 42,9 584,2 20 635,0 31,8

Uzun Kaynak Boyunlu FlanşLong Welding Flange

Sınıf 150 /150 LB

Boyutlar O, C, R ve civatalama ASME B 16.5 – 1996 ya göre.Dimensions O, C, R and drilling according to ASME B 16.5 – 1996.

GO

BR

C

0.06î (1,6 mm)

d

A

N

100

BoyutDiameter

O N A B Cmini


DN Sizeinç


dmm

15 1/2 95

Uzu

nluk

alıc

ı tar

afın

dan

belir

leni

r (öz

ellik

le fa

tura

lı al

ın).

Leng

th to

be

spec

ified

by

purc

hase

r (in

clud

ing

rais

ed fa

ce).

38,0 12,7 14,2 34,9 4 66,7 15,8

20 3/4 117 47,5 19,0 15,7 42,9 4 82,6 19,0

25 1 124 54,0 25,4 17,5 50,8 4 88,9 19,0

32 1 1/4 133 63,5 31,8 19,0 63,5 4 98,4 19,0

40 1 1/2 156 70,0 38,1 206, 73,0 4 114,3 22,2

50 2 165 84,0 50,8 22,4 92,1 8 127,0 19,0

65 2 1/2 190 100,0 63,5 25,4 104,8 8 149,2 22,2

80 3 210 117,0 76,2 28,4 127,0 8 168,3 22,2

– 3 1/2 229 133,0 88,9 30,2 139,7 8 184,1 22,2

100 4 254 146,0 101,6 31,8 157,2 8 200,0 22,2

125 5 279 184,0 127,0 35,0 185,7 8 235,0 22,2

150 6 318 206,0 152,4 36,6 215,9 12 269,9 22,2

200 8 381 260,0 203,2 41,1 269,9 12 330,2 25,4

250 10 444 321,0 254,0 47,8 323,8 16 387,4 28,5

300 12 521 375,0 304,8 50,8 381,0 16 450,8 31,8

350 14 584 425,0 355,6 53,8 412,8 20 514,4 31,8

400 16 648 483,0 406,4 57,2 469,9 20 571,5 35,0

450 18 711 533,0 457,2 60,5 533,4 24 628,6 35,0

500 20 775 587,0 508,0 63,5 584,2 24 685,8 35,0


Sınıf 300 /300 LB

GO

BR

C

0.06î (1,6 mm)

d

A

N


ASME B 16.5

101

BoyutDiameter

O N A B Cmini


DN Sizeinç


dmm

15 1/2 95

Uzu

nluk

alıc

ı tar

afın

dan

belir

leni

r (öz

ellik

le fa

tura

lı al

ın).

Leng

th to

be

spec

ified

by

purc

hase

r (in

clud

ing

rais

ed fa

ce).

38,0 12,7 14,2 34,9 4 66,7 15,8

20 3/4 117 48,0 19,0 15,7 42,9 4 82,6 19,0

25 1 124 54,0 25,4 17,5 50,8 4 88,9 19,0

32 1 1/4 133 63,5 31,8 20,6 63,5 4 98,4 19,0

40 1 1/2 156 70,0 38,0 22,4 73,0 4 114,3 22,2

50 2 165 84,0 50,8 25,4 92,1 8 127,0 19,0

65 2 1/2 190 100,0 63,5 28,4 104,8 8 149,2 22,2

80 3 210 117,0 76,2 31,8 127,0 8 168,3 22,2

– 3 1/2 229 133,0 88,9 35,0 139,7 8 184,1 25,4

100 4 273 152,0 101,6 38,1 157,2 8 215,9 25,4

125 5 330 190,0 127,0 44,5 185,7 8 266,7 28,5

150 6 356 222,0 152,4 47,8 215,9 12 292,1 28,5

200 8 419 273,0 203,2 55,6 269,9 12 349,2 31,8

250 10 508 343,0 254,0 63,5 323,8 16 431,8 35,0

300 12 559 400,0 304,8 66,5 381,0 20 489,0 35,0

350 14 603 432,0 355,6 69,9 412,8 20 527,0 38,1

400 16 686 495,0 406,4 76,2 469,9 20 603,2 41,1

450 18 743 546,0 457,2 82,6 533,4 20 654,0 44,5

500 20 813 610,0 508,0 88,9 584,2 24 723,9 44,5


Sınıf 600 /600 LB

GO

BR

C

0.06î (1,6 mm)

d

A

N


ASME B 16.5

102

BoyutDiameter

O N A B Cmini


DN Sizeinç


dmm

15 1/2 121

Uzu

nluk

alıc

ı tar

afın

dan

belir

leni

r (öz

ellik

le fa

tura

lı al

ın).

Leng

th to

be

spec

ified

by

purc

hase

r (in

clud

ing

rais

ed fa

ce).

38,0 12,7 22,4 34,9 4 82,6 22,2

20 3/4 130 48,0 19,0 25,4 42,9 4 88,9 22,2

25 1 149 54,0 25,4 28,4 50,8 4 101,6 25,4

32 1 1/4 159 63,5 31,8 28,4 63,5 4 111,1 25,4

40 1 1/2 178 70,0 38,0 31,8 73,0 4 123,8 28,5

50 2 216 100,0 50,8 38,1 92,1 8 165,1 25,4

65 2 1/2 244 124,0 63,5 41,1 104,8 8 190,5 28,5

80 3 241 127,0 76,2 38,1 127,0 8 190,5 25,4

– 3 1/2 292 158,5 101,6 44,5 157,2 8 235,0 31,8

100 4 349 190,0 127,0 50,8 185,7 8 279,4 35,0

125 5 381 235,0 152,4 55,6 215,9 12 317,5 31,8

150 6 470 298,5 203,2 63,5 269,9 12 393,7 38,1

200 8 546 368,5 254,0 69,9 323,8 16 469,9 38,1

250 10 610 419,0 304,8 79,2 381,0 20 533,4 38,1

300 12 641 451,0 355,6 85,9 412,8 20 558,8 41,1

350 14 705 508,0 406,4 88,9 469,9 20 616,0 44,5

400 16 787 565,0 457,2 101,6 533,4 20 685,8 50,8

450 18 857 622,5 508,0 108,0 584,2 20 749,3 53,8

500 20 1041 749,5 609,6 139,7 692,2 20 901,7 66,5


Sınıf 900 /900 LB


ASME B 16.5

GO

BR

C

0.06î (1,6 mm)

d

A

N

103

GBA

C

FlanşlarBoyut

Diameter A C G B AğırlıkWeight kg

DN Sizeinç inç mm inç mm inç mm inç mm WN

K.BoyunluBL

Kör Flanş

2 1/16 52,4 8.50 216 1.81 46,0 4.88 124,0 6.50 165,1 13,1 16,3

2 9/16 65,1 9.62 244 1.94 49,2 5.38 137,0 7.50 190,5 17,2 21,7

3 1/8 79,4 10.50 267 2.19 55,6 6.62 168,0 8.00 203,2 24,0 33,0

4 4/16 103,2 12.25 311 2.44 61,9 7.62 194,0 9.50 241,3 33,6 **

5 1/8 130,2 14.75 375 3.19 81,0 9.00 229,0 11.50 292,1 ** 79,0

7 1/16 179,4 15.50 394 3.62 92,1 9.75 248,0 12.50 317,5 79,3 **

9 228,6 19.00 483 4.06 103,2 12.50 318,0 15.50 393,7 ** **

11 279,4 23.00 584 4.69 119,1 14.63 371,0 19.00 482,6 ** 190,5

13 5/8 346,1 26.50 673 4.44 112,7 18.00 457,2 23.25 590,6 – **

16 3/4 425,5 30.38 772 5.13 130,2 21.06 535,0 26.62 676,3 – **

18 3/4 476,3 35.62 905 6.53 165,9 24.69 627,1 31.62 803,3 – **

21 1/4 539,8 39.00 991 7.12 181,0 27.62 701,7 34.88 885,8 – **

1 13/16 46,0 7.38 187 1.66 42,1 4.12 104,8 5.75 146,1 9,0 9,9

2 1/16 52,4 7.88 200 1.73 44,1 4.38 111,1 6.25 158,8 10,8 12,2

2 9/16 65,1 9.12 232 2.02 51,2 5.19 131,8 7.25 184,2 18,1 18,6

3 1/16 77,8 10.62 270 2.30 58,3 6.00 152,4 8.50 215,9 28,1 27,6

4 1/16 10,2 12.44 316 2.77 70,2 7.28 184,9 10.19 258,8 45,3 51,7

5 1/8 130,2 14.06 357 3.12 79,4 8.69 220,7 11.81 300,0 ** **

7 1/16 179,4 18.88 479 4.06 103,2 11.88 301,6 15.88 403,2 140,6 174,1

9 228,6 21.75 552 4.88 123,8 14.12 358,8 18.75 476,3 ** **

11 279,4 25.75 654 5.56 141,3 16.88 428,6 22.25 565,2 342,4 453,6

13 5/8 346,1 30.25 768 6.62 168,3 20.38 517,5 26.50 673,1 ** **

16 3/4 425,5 34.31 872 6.62 168,3 22.69 576,3 30.56 776,3 ** **

18 3/4(1) 476,3 40.94 1040 8.78 223,0 27.44 696,9 36.44 925,5 –– **

21 1/4(1) 539,8 45.00 1143 9.50 241,3 30.75 781,1 40.25 1022,4

Vidalı, Kaynak Boyunlu ve Kör Flanşlar - R.J Yüzey

Threaded, welding neck and blind flanges rated working

pressures - R.J. face

345–690 BarAPI 6 A – 1999

C

GBA

G

BA

C

API type 6 B – basınç sınıfı 345 bar – 5000 PSI working pressure by purchaser.

– Vidalı – bağlantıya istek halinde özel işlem yapılır.– Threaded – Special thread for compani-on on request.

Kör Flanş

Vidalı Flanş

Kaynak boyunlu

API type 6 BX – basınç sınıfı 345 bar – 5000 PSI working pressure by purchaser.(1)

API type 6 BX – basınç sınıfı 690 bar – 10000 PSI working pressure

TYPE 6 B

104

GBA

C

Ring joint (2) Civata saplamalar / Bolt studsBoyut

Diameter E1 E2 API AğırlıkWeight

Sayı

Num

ber Boyut

Dim. UNC Yükseklik / Length AğırlıkWeight

DN Sizeinç inç mm inç mm Nº kg inç. inç. mm Kg

2 1/16 52,4 0.438 11,13 0.469 11,91 R ou/or RX 24 0,57 8 7/8 6.00 152 0,65

2 9/16 65,1 0.438 11,13 0.469 11,91 R ou/or RX 27 0,57 8 1 6.50 165 0,94

3 1/8 79,4 0.438 11,13 0.469 11,91 R ou/or RX 35 0,70 8 1 1/8 7.25 184 1,34

4 4/16 103,2 0.438 11,13 0.469 11,91 R ou/or RX 39 0,80 8 1 1/4 8.00 203 1,81

5 1/8 130,2 0.438 11,12 0.469 11,91 R ou/or RX 44 8 1 1/2 10.00

7 1/16 179,4 0.500 12,70 0.531 13,49 R ou/or RX 46 1,25 12 1 3/8 10.75 273 2,75

9 228,6 0.625 15,88 0.656 16,67 R ou/or RX 50 2,40 12 1 5/8 12.00 305 4,29

11 279,4 0.625 15,88 0.656 16,67 R ou/or RX 54 2,40 12 1 7/8 13.75 349 6,60

13 5/8 346,1 0.541 13,74 BX-160 1,81 16 1 5/8 12.50 318 4,40

16 3/4 425,5 0.560 14,22 BX-162 2,40 16 1 7/8 14.50 368 6,90

18 3/4 476,3 0.684 17,37 BX-163 – 20 22 17.50 445 9,20

21 1/4 539,8 0.728 18,49 BX-165 5,10 24 18.75 476 9,55

1 13/16 46,0 0.379 9,63 BX-151 0,23 8 3/4 5.00 127 0,41

2 1/16 52,4 0.403 10,24 BX-152 0,23 8 3/4 5.20 133 0,41

2 9/16 65,1 0.448 11,38 BX-153 0,34 8 7/8 6.00 152 0,65

3 1/16 77,8 0.488 12,40 BX-154 0,45 8 1 6.75 171 0,95

4 1/16 10,2 0.560 14,22 BX-155 0,68 8 1 1/8 8.00 203 1,40

5 1/8 130,2 0.509 12,93 BX-169 – 12 1 1/8 8.75 222 1,50

7 1/16 179,4 0.733 18,62 BX-156 1,92 12 1 1/2 11.25 286 3,50

9 228,6 0.826 20,98 BX-157 3,06 16 1 1/2 13.00 330 3,90

11 279,4 0.911 23,14 BX-158 4,42 16 1 3/4 15.00 381 5,84

13 5/8 346,1 1.012 25,70 BX-159 6,57 20 1 7/8 17.25 438 7,50

16 3/4 425,5 0.560 14,22 BX-162 – 24 1 7/8 17.50 445 7,62

18 3/4(1) 476,3 0.968 24,59 BX-164 – 24 2 1/4 22.50 572 14,57

21 1/4(1) 539,8 1.029 26,14 BX-166 – 24 2 1/2 24.50 622 –

Vidalı, Kaynak Boyunluve Kör Flanşlar – R.J. YüzeyThreaded, welding neckand blind flanges rated working pressures – R.J. face

345–690 BarAPI 6 A – 1999

G

BA

C

API type 6 B – basınç sınıfı 345 bar – 5000 PSI working pressure by purchaser.

Kör Flanş/Blind Flange

Kaynak Boyunlu/ Welding Neck

API type 6 BX – basınç sınıfı 345 bar – 5000 PSI working pressure by purchaser.(1)


E2 23ϒ23ϒ

E2

E1 E1

Octogonal Oval

TYPE BX TYPE RX

TYPE RTYPE 6 BXFace type J / RJ Face

(1) Sadece kör flanşlar için geçerli/only for blind flanges – ** Ağırlık talep halinde verilir/**Weight on application

105

GBA

C

Flanges Flanşlar

BoyutDiameter A C G B Ağırlık

Weight E API AğırlıkWeight

sayı

num

ber Dimension

UNC sizeUzunlukLength

AğırlıkWeight

DN Sizeinç mm mm mm mm WN BL mm Nº kg inç mm kg

1 13/16 46,0 208 45,2 106,4 160,3 12,2 12,7 9,63 BX-151 0,23 8 7/8 140 0,63

2 1/16 52,4 222 50,8 114,3 174,6 15,8 16,7 10,24 BX-152 0,23 8 7/8 152 0,65

2 9/16 65,1 254 57,2 133,4 200,0 22,2 24,9 11,38 BX-153 0,34 8 1 171 0,95

3 1/16 77,8 287 64,3 154,0 230,2 32,6 37,2 12,40 BX-154 0,45 8 1 1/8 191 1,40

4 1/16 103,2 360 78,6 193,7 290,5 68,0 71,7 14,22 BX-155 0,70 8 1 3/8 235 2,50

5 1/8 130,2 419 98,5 225,5 342,9 111,0 – 12,93 BX-169 0,80 12 1 1/2 292 3,50

7 1/16 179,4 505 119,1 304,8 428,6 179,1 218,1 18,62 BX-156 1,92 16 1 1/2 324 3,88

9 (1) 228,6 648 146,1 381,0 552,5 – ** 20,98 BX-157 3,06 16 1 7/8 400 7,15

11 (1) 279,4 813 187,3 454,0 711,2 – ** 23,14 BX-158 4,42 20 2 489 9,90

13 5/8(1) 346,1 886 204,7 541,3 771,7 – ** 25,70 BX-159 ** 20 2 1/4 540 **

18 3/4(1) 476,3 1162 255,5 722,4 1016 – ** 24,59 BX-164 ** 20 3 679 **

1 13/16 46,0 257 63,5 117,5 203,2 ** ** 9,63 BX-151 0,23 8 1 191 1,03

2 1/16 52,4 287 71,4 131,8 230,2 ** ** 10,24 BX-152 0,23 8 1 1/8 210 1,43

2 9/16 65,1 325 79,4 150,8 261,9 ** ** 11,38 BX-153 0,34 8 1 1/4 235 1,95

3 1/16 77,8 357 85,7 171,5 287,3 ** ** 12,40 BX-154 0,45 8 1 3/8 254 2,60

4 1/16 103,2 446 106,4 219,1 357,2 ** ** 14,22 BX-155 0,70 8 1 3/4 311 5,20

7 1/16 179,4 656 165,1 352,4 554,0 ** ** 18,62 BX-156 1,92 16 2 445 9,20

9(1) 228,6 805 204,7 441,5 685,8 – ** 20,98 BX-157 ** 16 2 1/2 568 **

11(1) 279,4 883 223,8 505,0 749,3 – ** 23,14 BX-158 ** 16 2 3/4 603 **

13 5/8(1) 346,1 1162 292,1 614,4 1016 – ** 25,70 BX-159 ** 20 3 762 **

Vidalı, Kaynak Boyunlu ve Kör Flanşlar - R.J. YüzeyThreaded, welding neck and blind flanges rated

working pressures-R.J. face

1035–1380 BarAPI 6 A – 1999

G

BA

C

Kör Flanş/Blind Flange (BL)

Kaynak Boyunlu/ Welding Neck (WN)


23ϒE2

TYPE BX TYPE RXTYPE 6 BX


Ring Joint (2) Civata Saplamalar / Bold Studs

(1) Sadece kör flanşlar için geçerli/only for blind flanges – ** Ağırlık talep halinde verilir/**Weight on application

106

D

G C

B

D

JC

B

G

A J

C

B

A J

Q

J

J

D

B

BR

K

J

P

B C

F

J

D

CB

Dövme soket fittinglerSocket weld fittings

Class 3000ASME B16.11–1996

BoyutDia. A B C D E F G H J

min K P Q R

Sizemm min maxi moy. maxi min maxi

1/8 11,0 10,8 11,2 3,18 3,18 3,2 4,8 6,5 16 3,18 4,8 19 42,5 36

1/4 11,0 14,2 14,6 3,78 3,3 8,5 10 6,5 16 3,30 8 9,5 4,8 22 42,5 36

3/8 13,5 17,6 18 4,01 3,5 11,8 13,3 6,5 17,5 3,51 8 9,5 4,08 26 47,5 41

1/2 15,5 21,8 22,2 4,67 4,09 15 16,6 9,5 22,5 4,09 11 9,5 6,4 32 52 46

3/4 19,0 27,2 27,6 4,9 4,27 20,2 21,7 9,5 24 4,32 13 12,5 6,4 38 57 56

1 22,5 33,9 34,3 5,69 4,98 25,9 27,4 12,5 28,5 4,98 14 12,5 9,6 45 63 65

1 1/4 27,0 42,7 43,1 6,07 5,28 34,3 35,8 12,5 30 5,28 17,5 12,5 9,6 55 68 80

1 1/2 32,0 48,8 49,2 6,35 5,54 40,1 41,6 12,5 32 5,56 20,5 12,5 11,2 60 78 88

2 38,0 61,2 61,7 6,93 6,04 51,7 53,5 19 41 7,14 25,5 16 12,7 75 91 105

2 1/2 41,0 73,9 74,4 8,76 7,67 61,2 64,2 19 43 7,65 28,5 16 15,7 95 120 122

3 57,0 89,9 90,3 9,52 8,3 76,4 79,4 19 44,5 8,84 32 16 19 110 120 144

4 66,5 115,2 115,7 10,69 9,35 100,7 103,8 19 48 11,18 41 19 22,4 140 148 200

Soket Veld 45º – Socket Weld 45º Soket Veld 90º – Socket Weld 90º

Soket Veld te – Socket Weld Tee Soket Veld Kros – Socket Weld Cross Soket Veld Rekor – Socket Weld Union

A J

H

H

E

J

D

B C

Soket Veld ManşonSocket Weld Coupling

Soket Veld KepSocket Weld Cap

Soket Veld Yarım ManşonSocket Weld Half Coupling

Soket Veld Red. ManşonSocket Weld Red. Coupling

Ölçüler mm’ dir. / Dimensions are in mm.

Q

B C

D

R

C

B

A

G

D

107

Q

R

Dövme dişli fittinglerThreaded fittings

Class 3000ASME B16.11–1996

BoyutDia. A B C D E F G H I J P Q R T W X

1/8

1/4 25 11 19 19 15 16 3,3 25 4,8 6 25 42,5 36 6 35 8

3/8 28 23 22 22 18 18 3,51 33 4,8 8 25 47,5 41 8 38 11

1/2 33 14 25 28 22 22 4,09 38 6,4 8 32 52 46 8 48 14

3/4 38 16 28 35 27 27 4,32 46 6,4 10 37 57 56 10 51 19

1 44 19 33 44 35 36 4,98 56 9,7 10 41 63 65 10 60 24

1 1/4 51 21 35 57 - 46 5,28 62 9,7 14 44 68 80 – 67 -

1 1/2 60 21 43 64 50 50 5,56 75 11,2 16 44 78 88 16 79 38

2 64 22 44 76 62 65 7,14 84 12,7 18 48 91 105 17 86 49

2 1/2 83 27 52 92 - 75 7,65 102 15,7 19 60 120 122 – 92 -

3 95 28 64 108 - 90 8,84 121 19 21 65 120 144 – 108 -

4 114 32 79 140 - 115 11,18 152 22,4 25 68 148 200 – 121 -

Dişli 90º – Threaded 45º

Dişli te – Threaded Tee Dişli Rekor – Threaded Union

Dişli Yarım ManşonThreaded half Coupling

Dişli KepThreaded Cap

Dişli ManşonThreaded Coupling

Soket Veld Red. ManşonSocket Weld Red. Coupling

Ölçüler mm’ dir. / Dimensions are in mm.

A

G mini

A

H

H

H

A A

A

A

H

H

A A

A

Dişli kros – Threaded Cross

F

D

W2

D

P

miniD

W

C

H

C

G mini

I

B

J

108

Dirsek Rekor / Tee Rekor 90º Kuyruklu DirsekUnion Elbows / Tees 90º Street Elbows

Class 3000/6000

Nominal Pipe SizeClass 3000 Class 6000

K (1) L (1) M (1) N (1) K (1) L (1) M (1) N (1)

1/4 24,6 32,0 28,5 34 30,0 39,0 46,5 623/8 30,0 39,0 28,5 34 33,5 44,0 54 721/2 33,5 44,0 33 38 38,0 49,0 60 823/4 38,0 49,0 38 46,5 46,5 59,0 67 901 46,5 59,0 44,5 56,5 53,0 65,0 75 102

1 1/4 53,0 65,0 60,5 76 62,0 75,0 85 1151 1/2 62,0 75,0 60,5 76 68,0 82,5 98 125

2 68,0 82,5 63,5 92 82,5 110,0 109 140

90º Street Dirsek90º Street Elbow

K

L

M

M

M

NN

N

M

MO

P P

M

N

O

Dimensions not listed in ASME B 16.11 – 1996 end BS 3799 –1974 may vary acc. to manufacturer.

Union Tee Union Elbow

Union TeeUnion Elbow

Threads acc. to ASME B 1.20.1–1983

109

Siviç NipelSwedge Nipple

Class 3000/6000

Butt Welding EndAcc. to ASME B16.25–1997

Cut Square Plain End

Threaded Ends Acc. to ASME B1.20.1–1993

Boyut Boru/PipeDia. NPS

Class 3000 – 6000

K L

mm inç mm inç

3/8 x 1/4 76 3.00 20 0.79

1/2 x 3/8 89 3.50 20 0.79

1/2 x 1/4 89 3.50 20 0.79

3/4 x 1/2 95 2.75 21 0.83

3/4 x 3/8 95 2.75 21 0.83

1 x 3/4 102 3.55 22 0.87

1 x 1/2 102 3.55 22 0.87

11/4 x 1 102 3.55 25 0.98

1 1/2 x 1 1/4 114 4.53 25 0.98

1 1/2 x 1 114 4.53 25 0.98

1 1/2 x 3/4 114 4.53 25 0.98

2 x 1 1/2 165 6.50 30 1.18

2 x 1 1/4 165 6.50 30 1.18

2 x 1 165 6.50 30 1.18

2 1/2 x 2 178 7.01 35 1.38

3 x 2 203 8.00 40 1.57

4 x 3 230 9.06 45 1.77

4 x 2 230 9.06 45 1.77

ASME B16.11–1996

110

VeldoletWeldolet

Class 3000/6000

Outlet Nominal Size (inç)

A(mm)

C L B Ağırlık weight kg

STD S80XS

XXSS160 STD S80

XSXXSS160 STD S80

XSXXSS160 STD S80

XSXXSS160

1/8 10,3 15,9 15,9 15,9 15,9 25,4 25,4 0,04 0,05

1/4 13,7 15,9 15,9 15,9 15,9 25,4 25,4 0,04 0,05

3/8 17,1 19,1 19,1 19,1 19,1 31,8 31,8 0,07 0,07

1/2 21,3 23,8 23,8 14,3 19,1 19,1 28,6 34,9 34,7 34,9 0,08 0,09 0,11

3/4 26,7 30,2 30,2 19,1 22,2 22,2 31,8 44,5 44,5 44,5 0,11 0,14 0,32

1 33,5 36,5 36,5 25,4 27 27 38,1 54 54 50,8 0,23 0,21 0,38

1 1/4 42,2 44,5 44,5 33,3 31,8 31,8 44,5 65,1 65,1 61,9 0,36 0,41 0,57

1 1/2 48,3 50,8 50,8 38,1 33,3 33,3 50,8 73 73 69,9 0,45 0,5 0,79

2 60,5 65,1 65,1 42,9 38,1 38,1 55,6 88,9 88,9 81 0,79 0,79 0,97

2 1/2 73,2 76,2 76,2 54 41,3 41,3 61,9 103,2 103,2 96,8 1,13 1,18 1,53

3 88,9 93,7 93,7 73 44,5 44,5 73 122,2 122,2 120,7 1,81 1,86 2,87

3 1/2 101,6 101,6 101,6 47 47,6 142,9 136,5 2,49 2,54

4 114,3 120,7 120,7 98,4 50,8 50,8 84,1 152,4 152,4 152,4 2,86 2,9

5 141,2 141,3 141,3 122,2 57,2 57,2 93,7 179,4 179,4 187,3 4,65 4,72

6 168,3 169,9 169,9 146,1 60,3 77,8 104,8 215,9 225,4 220,7 5,44 10,43

8 219,1 220,7 220,7 69,9 98,4 263,5 292,1 10,43 16,78

10 273 274,6 265,1 77,8 93,7 322,3 323,9 16,33 20,9

12 323,9 325,4 317,5 85,7 103,2 377,8 379,4 26,8 28

14 355,6 357,2 350,9 88,9 100 409,6 431,8 30 32

16 406,4 408 403,2 93,7 106,4 463,6 466,7 34 46,5

18 457,2 458,8 455,6 96,8 111,1 520,7 523,9 44 59

20 508 508 509,6 101,6 119,1 571,5 582,6 53,5 131,5

24 610 614,4 614,4 115,9 139,7 689 708 99,8 159

26 660,4 666,8 692,2 119,1 146,1 738,2 765,2 120 -

30 711,2 773,1 – 136,5 - 865,2 - 195

Design per MSS SP-97 BW ends per B16.9 and B16.25Each outlet size listed is available to fit any run curvature.

RUN PIPE

ROOT GAP (X)

L

B

L1

C

Dimensions are in mm.General notes:Root Gap - X - “Space” for welding the O’let is raised off the run pipe to establish properweld gap by placing spacers, e.g. welding rods, under the fitting. This provides a uniformwelding gap between the curvature of the run and base of fitting.L1 = Dimensions Center Line of Run Pipe + X (Root Gap) + A (height of Weldolet).Bevelled Ends ASME B16.9 and B16.25.Source comes from Bonney Forge (except the sizes in millimeters).Weldolet® is a registered name. Another often used name is Welding Outlet.

t

ASME B16.11

111

TridoletThredolet

Class 3000/6000

B

ROOT GAP

A

C RUN PIPE

OUTLETBRANCH

RUN PIPE

SIZE ON SIZE

OUTLETBRANCH

Outlet Size inches

Dimensions AğırlıkAprox. weight

kgA(mm)

B(mm)

C(mm)

F(mm)

3000 # 6000 #3000 # 6000 # 3000 # 6000 # 3000 # 6000 # 3000 # 6000 #

1/8 19,1 - 25,4 - 15,9 - 18,5 - 0,05 -1/4 19,1 28,6 25,4 34,9 15,9 14,3 22,9 - 0,05 0,143/8 20,6 28,6 31,8 34,9 19,1 14,3 26,9 - 0,09 0,141/2 25,4 31,8 34,9 44,5 23,8 19,1 31,8 39,7 0,11 0,203/4 27,0 36,5 44,5 50,8 30,2 25,4 36,5 45,2 0,16 0,341 33,3 39,7 54,0 61,9 36,5 33,3 46,0 57,2 0,28 0,56

1 1/4 33,3 41,3 65,1 69,9 44,5 38,1 55,6 65,1 0,41 0,711 1/2 34,9 42,9 73,0 82,6 50,8 49,2 61,9 76,2 0,45 0,89

2 38,1 52,4 88,9 103,2 65,1 69,9 74,6 92,1 0,80 2,312 1/2 46,0 - 103,2 - 76,2 - 87,3 - 1,36 -

3 50,8 - 122,2 - 93,7 - 104,8 - 1,98 -

4 57,2 - 152,4 - 120,7 - 130,2 - 3,23 -

Design per MSS-SP 97 Threaded ends are in accordance with ANSI/ASME B1.20.1 Each outlet sizelisted is available to fit any run curvature.

Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly.

A flat Thredolet for use on welding caps, elliptical heads and flat surfaces is available.

RUN PIPE SIZES

FLATS

F

ASME B16.11

112

SokoletSockolet

Class 3000/6000ASME B16.11

Design per MSS-SP 97 Socket Dimensions comply with ASME B16.11Each outlet size listed is available to fit any run curvature.

B

A

C

OUTLET BRANCH

1/16Min.

RUN PIPE

SIZE ON SIZE

1/16Min.

OUTLET BRANCH

Outlet Size

inches

Dimensions AğırlıkAprox. weight

kgA(mm)

B(mm)

C(mm)

F(mm)

E(mm)

3000 # 6000 #3000 # 6000 # 3000 # 6000 # 3000 # 6000 # 3000 # 6000 # 3000 # 6000 #

1/8 25,4 19,1 15,9 18,5 0,051/4 25,4 19,1 15,9 22,9 0,053/8 31,8 20,6 19,1 26,9 0,091/2 34,9 44,5 25,4 31,8 23,8 30,1 33 39,7 14,28 22,22 0,14 0,233/4 44,5 54 27 36,5 30,2 36,5 39 46 14,28 22,22 0,15 0,361 54 65 33,3 39,6 34,5 44,5 47,3 57,2 19,84 23,81 0,27 0,39

1 1/4 65,1 73 33,3 41,2 44,5 50,8 57 65 19,05 20,63 0,39 0,731 1/2 73 89 34,9 42,8 60,8 65 63,4 76,2 19,05 22,22 0,47 0,91

2 88,9 103 38,1 52 65,1 76,2 77 92 20,63 30,16 0,73 2,332 1/2 103,2 39,7 76,2 96,6 19,05 1,25

3 122,2 44,5 93,7 114 23,81 1,723 1/2 133,4 54 101,6 127 17,46 1,95

4 152,4 47,6 120,7 138,9 26,98 3,29

Outlet sizes noted above fit a number of run pipe sizes, and the fittings are marked accordingly.

A flat Thredolet for use on welding caps, elliptical heads and flat surfaces is available.

RUN PIPE SIZES

FLATS

F

RUN PIPE

E

113

PERTINENT POINTS ON SIZE ON SIZE WELDOLET® FITTING INSTALLATIONIn contrast to the reducing sizes, the size on size Weldolet and the first reducing size are designed with an elliptical hole (as shown on pages 9 and 11). This has been done to provide the necessary full size opening without requiring a 50% portion of the header pipe to be removed (it is actually closer to 40%). This reduced hole cut combines with the proper welding procedure to minimize the possibility of header distortion.Multiple outlet headers requiring all full size openings are subject to distortion because of the large number of holes that have to be cut in close proximity to one another. To eliminate the possibility of distortion occurring when using Weldolets in this type of installation we recommend that a strap be left in the center of the hole, by cutting out two half moon sections (as shown in sketch). This strap acts as a support until after the Weldolet has been installed and is then cut out.Since alloys are more difficult to weld than carbon steel, many companies have set up specified welding procedures. For those who do not have access to such specifications we offer the following suggestions:

CHROME MOLY WELDOLET INSTALLATIONIf the hole is to be flame cut rather than machine cut it is very important that all slag and rough edges be ground to a bright metal finish.When preheating the materials to be welded, it is advisable to preheat to a temperature of 100° F more than shown in the code tables. This is done to eliminate the possibility of the material cooling to a temperature below the minimum shown on the table. Temperature crayons or electrical temperature controls are generally utilized to determine when the proper heat has been reached. Isolate all welding from chills and drafts.When welding has been completed it is advisable to follow stress-relieving procedures at once. If however, this is not feasible, the welded section should be post heated to a dull red. The whole area should then be wrapped with a heat blanket and allowed to cool before stress relieving. The stress-relieving temperature should then be determined by the type of alloy and the engineer’s recommended specifications or procedure.

STAINLESS STEEL WELDOLET INSTALLATIONA hole saw or drill should be used to cut small size branch openings in stainless headers. Abrasive cutting wheels are generally used to make larger size holes. Arc cutting or the injection of iron powder into an acetylene flame are other methods used. If, however, any of these flame or arc methods are used, the hole should be cut under-size to allow for grinding out the heat-affected areas before welding. Either the Heliarc or metal-arc methods may be used for welding. The sequence of welding passes for both alloy and stainless is the same as outlined for carbon steel Weldolet fittings

INSTALLATION PROCEDURE

114

READY TO WELDEvery fitting is shaped to fit the pipe and is self-aligning.

LONGITUDAL SECTIONFig. 1 Wide bases or footings at crotch section distribute internal and external stresses.Funnel shaped opening provides improved flow conditions.

ROOT GAP

SINGLE – BEVELGROOVE WELD

CROTCHBEVEL

The outlet is machine-beveled for quick easy butt-welding of the branch pipe for shop or field fabrication.

RIBWELD LINE SKIRT

Track Weld The base joint is tack welded, preferably at four points, each half way between the crotch and skirt sections of the fitting. The spacers are then removed.

TRANSVERSE SECTIONFig. 2 Note the blending of the skirt section of the Weldolet to the run pipe to avoid abrupt change in inter-section. Throat of weld at this point is designated by the welding bevel.

SINGLEVEE GROOVEDWELD

FULL PENETRATION

Cut Hole The hole in the run pipe on reducing sizes can be cut out either before or after the fitting is welded on. The hole can be cut with a torch, a drill or a hole saw. Welding the fitting to the run pipe prior to cutting the hole helps prevent distortion of the run and can be done generally on outlet sizes over two inches.

Layout The template is the inside of the fitting.

STRINGER BEADCONTINUOUS PASS AROUNDENTIRE FITTING

WELD LINE

SECOND REINFORCING PASS

FINAL COVER BID

FIRST REINFORCING PASS

“Space” for Welding The Weldolet® is raised off the run pipe to establish proper weld gap by placing spacers, e.g. welding rods, under the fitting. This provides a uniform welding gap between the curvature of the run and base of fitting.

TOP VIEW SHOWING SPACER TO PROVIDE ROOT GAP

SPACER

HOLE

PIPE

Stringer BeadThe stringer bead is applied completely around the base of the fitting. The established weld gap assures full penetration.Reinforcing BeadsReinforcing welds should be made at the crotch bevel areas of the fitting to provide maximum weld at the crotch tapering to minimum at the skirt. Particular care should be taken to weldonly the bevel portion of the fitting. (See “weld lines” on above drawing.) This eliminates the unnecessary use of continuous passes and prevents the erroneous practice of welding up to the rib on the skirt portion of the fitting. A continuous cover beadshould be added to fill the bevel and provide a smooth weld.

FIRSTSTRINGER PASSSECONDSTRINGER PASSFIRSTREINFORCINGPASSSECONDREINFORCINGPASSFINAL COVERPASS

INSTALLATION PROCEDURE

115

ASME B16.5

Boyut referanslarıDış çap, et kalınlığı, alınlama ve delgi şablonu; bütün bu çaplar redüksiyon elde edilen flanşların anma boyutlarını bire bir karşılamaktadır.Normal ölçüdeki flanşlarda olduğu gibi 1/16" ölçüsündeki fatura yüzeyi, 150 lb ve 300 lb redüksiyon flanşlarda da kalınlığa dahildir. 400 lb ve üzeri basınçlardaki flanşların 1/4" (6,35mm) olan fatura yüzeyleri kalınlığa dahil değildir. Diğer her türlü yüzey işlemi tedarik edilebilir.Göbek Çapı ve YükseklikGeçme Göbekli Redüksiyon Flanş (Slip-on) ile Vida Dişli Redüksiyon Flanş (Threaded), redüksiyon büyüklüğüne bakılmaksızın, göbek çapı alt (m) ve göbek yüksekliği (H1) diğer benzer tipteki aynı basınç değerlerine sahip normal bir flanş ile aynıdır, ancak redüksiyonun gerçekleşeceği yerin anma çapından bir anma çapı daha azdır.Kaynak Boyunlu Redüksiyon Flanşlar’ın göbek boyutları, indirgemenin gerçekleceği, aynı başınç ve anma çapı boyutlarına sahip normal flanşlar ile aynıdır.Delik Açma:Geçme Göbekli (Slip-on) Redüksiyon Flanşlara, redüksiyonun gerçekleşeceği benzer anma çapı ve basınca sahip flanşlara benzer çaplarda delik açılır. 150 lb basınç değerine sahip Vida Dişli Redüksiyon Flanşlar'a standard gereği havşa açmaya gerek yoktur. 300 lb ve üstü basınç standardlarındaki havşa açma derinliği 2” ve altındaki diş açmalarda 1/4”, 21/2” ve üstündeki diş açmalarda da 3/8” dir. Havşa açma çapı, diğer normal flanşlar ile aynıdır.Minumum Delik Açma:Göbekli Flanşlar’ın en küçük delik açma çapları yukarıdaki tabloda yer almaktadır. Listede yer almayan daha küçük çapta redüksiyon istenilen kör flanşlara, talep edilen anma çaplarında delik ve diş açılır.

Dimensional ReferencesOutside Diameter, Thickness, Facing and Drilling TemplateAll these dimensions correspond exactly with those of the full size flange of the nominal pipe size from which the reduction is being made. As in the case of regular full size flanges, the 1/16” Raised Face on 150lb and 300lb. reducing flanges is included in thickness. The 1/4” Raised Face on flanges in the 400lb. and higher Pressure Standards is not included in thicknesses. Any other facing can be furnished.Hub Diameter and Height:For Reducing Slip-on and Threaded flanges, regardless of the amount of reduction, the hub diameter at base (m) and height of hub (h1) are the same as those of a full size flange of the same type and Pressure Standard, but one nominal pipe size smaller than the size from which the reduction is being made. For Reducing Welding Neck Flanges hub dimensions are the same as those of a full size flange of the nominal pipe size (and Pressure Standard) to which the reduction is being made.Bore:Reducing Slip-on flanges are bored to the same diameters as full size flanges of the size (Pressure Standard) to which the reduction is made. Reducing Threaded flanges in the 150lb. Standard do not require a counter bore. On 300lb. and higher Pressure Standards depth of counterbore is 1/4” for tappins 2” and smaller and 3/8” for tappings 21/2” and larger. Counterbore diameters are the same as for full size flanges of identical tapping.Minumum Bores:The smallest sizes to which hubbed flanges can be bored are listed in the above table. For reductions to sizes smaller than listed, Blind Flanges are furnished bored or tapped to required nominal pipe size.

Nominal Pipe SizeMinumum Bore

of Tapping of Hub Flange

Nominal Pipe SizeMinimum Bore or Tapping of Hub

FlangeNominal Pipe Size

Minumun Bore of Tapping of Hub

Flange

DN

Min. delik çapı veya diş açma için gereken

minimum flanş göbeği

DN



DN



1”1 1/4”1 1/2”

2”2 1/2”

3”

1/2”1/2”1/2”1”

1 1/4”1 1/4”

3 1/2”4”5”6”8”

10”12”

1 1/2”1 1/2”1 1/2”2 1/2”

3”3 1/2”3 1/2”

14”16”18”20”

24”

3 1/2”4”4”4”

4”

m h1

m h1

m

h1

Sınıf 150–2500 lb/sq

Redüksiyon FlanşlarReducing Flanges

116

300-2500 lb/sq. in.

Orifis flanşlar ASME/ANSI B16.36 kapsamındadır. Çeşitli alanlarda (Alınlama, işaretleme v.b) ASME/ANSI B16.5 standardı ile uyumludurlar.

Boyutlar: Vidalı Orifis Flange: 300 lbs 1”-8” Slip-on (Geçme Göbekli) Orifis Flanges: 300 lb 1”-24” Kaynak Boyunlu Orifis Flanges: 300 lb 1”-24” 400 lb 4”-24” 600 lb 1”-24” 900 lb 3”-24” 1500 lb 1”-24” 2500 lb 1”-12”

Minimun flanş kalınlığı 38.1 mm dir. Toplam göbek yüksekliği, flanş kalınlığı gibi aynı oranda artmaktadır.

Toleranslar ASME/ANSI B 16.5 Standardı’na göredir, şunlar hariç:

1. Basınç kılavuz lokasyonu: Basınç kılavuz delik merkezi toleransı flanş fatura yüzeyinden itibaren:a. Çapı 4”ten küçük flanşlarda ±0.02”b. Çapı 4” ve üzeri flanşlarda ±0.03”2. İç çap: Delik çapı toleransı (Kaynak Boyunlu Flanşlar sadece) anma değerinin ±0,5% dir.

RF-Orifis Flanş’ın yüksekliği 600 lbs 1”-3” arası 0.006”.Her Orifis Flanş 180° açılar ile yerleştirilmiş 1/2” NPT dişli 2 basınç deliğine sahiptir.Her delik boru tıpası ile donatılacaktır.Tıpa çapları şöyledir:

Orifis Flanşlar1”-21/2” 6,4mm3” 9,5mm4” ve üstü 12,7mm

Delik merkezinden flanş yüzeyine kadar olan mesafe tüm RF flanşlar için 23,8mm, RTJ flanşlar için de 19,1mm dir ve oluğun iç çapından ölçülmelidir. Kanal derinliği 11,1mm veya daha yük-sek ise, yiv temelindeki ve NPT (Amerikan Konik Diş Standardı) delme işlemindeki malzeme eksikliğinden söz edilebilir. Delme çapının değiştirilmesi ya da delme işlem türünün değiştirilmesi gerekebilir.

Her flanş, basınç kılavuzuna 90° açıda, flanş ekseni üzerindeki deliklere takılı, kaldıraç görevi görecek makine civatasına sahip olmalıdır. Makine civatası, bir ağır altıköşe somun düzeninde olmalıdır.

Diş yuvasının derinliği somunun civata ile bağlandığı flanş ara yüzeyiyle herhangi bir çakışma olmayacak şekilde orifis flanşsız da somunu tutmalıdır.

Orifice flanges are ruled in ASME/ANSI B16.36.In varius fields (facing, marking etc.) they are in accordance with ASME/ANSI B16.5

Sizes: Threaded Orifice Flange: 300 lbs 1”-8” Slip-on Orifice Flanges: 300 lb 1”-24” Welding Neck Orifice Flanges: 300 lb 1”-24” 400 lb 4”-24” 600 lb 1”-24” 900 lb 3”-24” 1500 lb 1”-24” 2500 lb 1”-12”

The minumum flange thickness is 38.1 mm. The overall length of hub increases in the same as the flangethickness.Tolerances on all dimensions shall be as shown in ASME/ANSI B 16.5 except for:

1. Pressure tap location:Tolerance on location of centre of pressure tap hole from flange faces shall be:a. flange smaller than 4”±0.02”b. flange 4” and larger ±0.03”2. Inside diameter: Bore diameter tolerance (welding neck flanges only) is ±0,5% of nominal value.

Height of RF-Orifice Flanges 600 lbs 1”-3” is 0.006”.Eeach Orifice Flange is Provided with 2 Pressure tap holes 1/2” NPT, displaced by 180°. Each hole shall be equip-ped with a pipe plug.Tape hole diameters are:

Orifice Flanges1”-21/2” 6,4mm3” 9,5mm4” and larger 12,7mm

The distance x from the centre line of the hole to theface is for RF-Flanges 23.8 mm and for all RTJ-Flanges 19,1mm and shall be measured at the bore.For depth of groove 11,1mm or larger there are due to insufficient material between groove and pressuretap hole modifications of diameter of hole or type of holenecessary.

Each Flange shall have a machine bolt mounted in ahole drilled on the flange centre line at 90° from thepressure taps, for use as jackscrew. Machine bolt shallbe regular with one heavy hex nut.

The depth of the slot shall admit the nut so that thereis no interference with the joining of the flanges whenbolted together without orifice flanges.

Orifis flanşlarOrifice flanges 1” = 25,4mm

X

117

Tanı

mD

esig

natio

n

Çekm

e D

eney

imi

Akm

a D

eney

imi

Dar

be D

eney

imi

Kim

yasa

l Bile

şim

ler,

ağırl

ık%

Tens

ile s

tren

gthl

Yiel

d st

reng

thl

Impa

ct p

rope

rtie

sCh

emic

al c

ompo

sitio

n, w

eigh

t %Av

arag

e at

Ort

alam

a D

eğer

AST

MKS

I

N/m

m²

KSI

N

/mm

²°F

ft.lb

f°C

Joul

eC

SiM

nP

SCr

Mo

Ni

AL

TiCu

V N

bN

C21

≥70

≥485

≥3

0≥2

50m

in.

max

.0,

180

0,23

00,

150

0,35

00,

800

1,35

00,

035

0,03

00,

300

0,12

00,

400

0,01

50,

400

0,03

00,

020

A10

5-97

Carb

on s

teel

for a

mbi

ent a

nd h

ighe

r tem

pera

ture

ser

vice

A10

5≥7

0≥4

85≥3

6≥2

50m

in.

max

.0,

350

0,10

00,

350

0,60

01,

050

0,03

50,

040

0,30

00,

120

0,40

00,

400

0,05

00,

020

A18

1-95

b

Clas

s 60

≥60

≥415

≥30

≥205

min

. m

ax.

0,35

00,

100

0,35

01,

100

0,05

00,

050

Clas

s 70

≥70

≥485

≥36

≥250

min

. m

ax.

0,36

00,

100

0,35

01,

100

0,05

00,

050

A18

2-97

clo

w a

lloy

stee

ls fo

r hig

h te

mpe

ratu

re

Gra

de F

1≥7

0≥4

85≥4

0≥2

75m

in.

max

.0,

280

0,15

00,

350

0,60

00,

900

0,04

50,

045

0,44

00,

650

Gra

de F

2≥7

0≥4

85≥4

0≥2

75m

in.

max

.0,

050

0,21

00,

100

0,60

00,

300

0,80

00,

040

0,04

00,

500

0,81

00,

440

0,65

0

Gra

de F

5≥7

0≥4

85≥4

0≥2

75m

in.

max

.0,

150

0,50

00,

300

0,60

00,

030

0,03

04,

000

6,00

00,

440

0,65

00,

500

Gra

de F

5a≥9

0≥6

20≥6

5≥4

50m

in.

max

.0,

250

0,50

00,

600

0,04

00,

030

4,00

06,

000

0,44

00,

650

0,50

0

Gra

de F

9≥8

5≥5

85≥5

5≥3

80m

in.

max

.0,

150

0,50

01,

000

0,30

00,

600

0,03

00,

030

8,00

00,

900

1,10

0

Gra

de F

11,C

I.1≥6

0≥4

15≥3

0≥2

05m

in.

max

.0,

050

0,15

00,

500

1,00

00,

300

0,60

00,

030

0,03

01,

000

1,50

00,

440

0,65

0

Gra

de F

11,C

I.2≥7

0≥4

85≥4

0≥2

75m

in.

max

.0,

100

0,20

00,

500

1,00

00,

300

0,80

00,

040

0,04

01,

000

1,50

00,

440

0,65

0

Gra

de F

11,C

I.3≥7

5≥5

15≥4

5≥3

10m

in.

max

.0,

100

0,20

00,

500

1,00

00,

300

0,80

00,

040

0,04

01,

000

1,50

00,

440

0,65

0

Gra

de F

12,C

I.1≥6

0≥4

15≥3

2≥2

20m

in.

max

.0,

050

0,15

00,

500

0,30

00,

600

0,04

50,

045

0,80

01,

250

0,44

00,

650

Gra

de F

12,C

I.2≥7

0≥4

85≥4

0≥2

75m

in.

max

.0,

100

0,20

00,

100

0,60

00,

300

0,80

00,

040

0,04

00,

800

1,25

00,

440

0,65

0

Flan

ş M

alze

mel

eri

– M

ater

ial f

or F

lang

es

118

Tanı

mD

esig

natio

n

Çekm

e D

eney

imi

Akm

a D

eney

imi

Dar

be D

eney

imi

Kim

yasa

l Bile

şim

ler,

ağırl

ık%

Tens

ile s

tren

gthl

Yiel

d st

reng

thl

Impa

ct p

rope

rtie

sCh

emic

al c

ompo

sitio

n, w

eigh

t %Av

arag

e at

Ort

alam

a D

eğer

AST

MKS

I

N/m

m²

KSI

N

/mm

²°F

ft.lb

f°C

Joul

eC

SiM

nP

SCr

Mo

Ni

AL

TiCu

V N

bN

Gra

de F

22, C

l.1≥6

0≥4

15≥3

0≥2

05m

in.

max

.0,

050

0,15

00,

500

0,30

00,

600

0,04

00,

040

2,00

02,

500

0,87

01,

130

Gra

de F

22, C

l.3≥7

5≥5

15≥4

5≥3

10m

in.

max

.0,

050

0,15

00,

500

0,30

00,

600

0,04

00,

040

2,00

02,

500

0,87

01,

130

Gra

de F

22V

85-1

1058

5-78

0≥6

0≥4

15m

in.

max

.0,

110

0,15

00,

100

0,30

00,

600

0,01

50,

010

2,00

02,

500

0,90

01,

100

0,25

00,

0300

0,20

000,

250

0,35

000,

070

1)

Gra

de F

91≥8

5≥5

85≥6

0≥4

15m

in.

max

.0,

080

0,12

00,

200

0,50

00,

300

0,60

00,

020

0,01

08,

000

9,00

00,

850

1,05

00,

400

0,04

00,

1800

0,25

000,

060

0,10

00,

030

0,07

0

A18

2-97

c

Gra

de F

304

≥75

≥515

≥30

≥205

min

.m

ax.

0,08

01,

000

2,00

00,

045

0,03

018

,00

20,0

008,

000

11,0

00

Gra

de F

304H

≥75

≥515

≥30

≥205

min

.m

ax.

0,04

00,

100

1,00

02,

000

0,04

50,

030

18,0

0020

,000

8,00

011

,000

Gra

de F

304L

≥70

≥485

≥25

≥170

min

.m

ax.

0,03

51,

000

2,00

00,

045

0,03

018

,000

20,0

008,

000

13,0

00

Gra

de F

310

≥75

≥515

≥30

≥205

min

.m

ax.

0,15

01,

000

2,00

00,

045

0,03

024

,000

26,0

0019

,000

22,0

00

Gra

de F

316

≥75

≥515

≥30

≥205

min

.m

ax.

0,08

01,

000

2,00

00,

045

0,03

016

,000

18,0

0010

,000

14,0

00

Gra

de F

316H

≥75

≥515

≥30

≥205

min

.m

ax.

0,04

00,

100

1,00

02,

000

0,04

50,

030

16,0

0018

,000

2,00

03,

000

10,0

0014

,000

Gra

de F

316L

≥70

≥485

≥25

≥170

min

.m

ax.

0,03

51,

000

2,00

00,

045

0,03

016

,000

18,0

002,

000

3,00

010

,000

15,0

00

Gra

de F

321

≥75

≥515

≥30

≥205

min

.m

ax.

0,08

01,

000

2,00

00,

045

0,03

017

,000

2,00

03,

000

9,00

012

,000

2)

Gra

de F

321H

≥75

≥515

≥30

≥205

min

.m

ax.

0,04

00,

100

1,00

02,

000

0,04

50,

030

17,0

009,

000

12,0

003)

Gra

de F

347

≥75

≥515

≥30

≥205

min

.m

ax.

0,08

01,

000

2,00

00,

045

0,03

017

,000

20,0

009,

000

13,0

004)

Gra

de F

347H

≥75

≥515

≥30

≥205

min

.m

ax.

0,04

00,

100

1,00

02,

000

0,04

50,

030

17,0

0020

,000

9,00

013

,000

5)

Flan

ş M

alze

mel

eri

– M

ater

ial f

or F

lang

es

119

Flan

ş M

alze

mel

eri

– M

ater

ial f

or F

lang

es

Tanı

mD

esig

natio

n

Çekm

e D

ayan

ımı

Akm

a D

ayan

ımı

Dar

be D

ayan

ımı

Kim

yasa

l Bile

şim

ler,

ağırl

ık %

Tens

ile

stre

ngth

Yiel

d st

reng

thIm

pact

pro

pert

ies

Chem

ical

com

posi

tion,

wei

ght %

Avar

age

atO

rtal

ama

Değ

er

AST

MKS

I

N/m

m²

KSI

N

/mm

²°F

ft.lb

f°C

Joul

eC

SiM

nP

SCr

Mo

Ni

AL

TiCu

V N

bN

A35

0-97

Düş

ük s

ıcak

lık k

ulla

nım

ında

kar

bon

ve a

laşı

mlı

çelik

ler -

Carb

on a

nd lo

w a

lloy

stee

ls fo

r low

tem

pera

ture

ser

vice

Gra

de L

F160

-85

415-

585

≥30

≥250

-20

≥13

-28,

9≥1

8m

in.

max

.0,

350

0,15

00,

300

0,60

01,

350

0,35

00,

040

0,30

00,

120

0,40

00,

400

0,05

00,

020

Gra

de L

F2, C

l.170

-95

485-

565

≥36

≥250

-50

≥15

-45,

6≥2

0m

in.

max

.0,

350

0,15

00,

300

0,60

01,

350

0,03

50,

040

0,30

00,

120

0,40

00,

400

0,05

00,

020

Gra

de L

F2, C

l.270

-95

485-

655

≥36

≥250

0≥2

0-1

8,0

≥27

min

.m

ax.

0,35

00,

150

0,30

00,

600

1,35

00,

035

0,04

00,

300

0,12

00,

400

0,40

00,

050

0,02

0

Gra

de L

F370

-95

485-

655

≥37,

5≥2

60-1

50≥1

5-1

01,1

≥20

min

.m

ax.

0,20

00,

200

0,35

00,

900

0,03

50,

040

0,30

00,

120

0,40

00,

400

0,05

00,

020

Gra

de L

F3, C

l.170

-95

485-

655

≥37,

5≥2

60-1

50≥2

0-1

01,1

≥27

min

.m

ax.

0,20

00,

200

0,35

00,

900

0,03

50,

040

0,30

00,

120

0,40

00,

400

0,05

00,

020

1)B=

0,0

002

max

. 2

) 5xC

% ≤

Ti%

≤0,

70%

3)

4xC

% ≤

Ti%

≤0,

70%

4)

10xC

% ≤

Nb

≤1,1

0% C

a=0,

0150

max

.

5)8

xC%

≤N

b ≤1

,10%

Add.

requ

ired

limits

con

cern

ing

the

sum

of t

he s

ingl

e el

emen

ts s

hall

be le

arne

d fr

om th

e re

leva

nt o

rigin

al

AST

M s

tand

ards

120

1 2 3 4 5 6 7 8 9

Nominal Pipe Size

OutsideDiameter of Flange

O

Drilling [ (3), (4) ]Length of Bolts (5)

L

Stud Bolts (1) Machine BoltsDiameter

ofBolt

Circle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Basis0.06 in. Raised

FaceRing Joint

0.06 in. Raised

Face

1/23/41

1 1/41 1/2

22 1/2

33 1/2

4

568

1012

1416182024

3,503,884,254,625,00

6,007,007,508,509,00

10,0011,0013,5016,0019,00

21,0023,5025,0027,5032,00

2,382,753,123,503,88

4,755,506,007,007,50

8,509,50

11,7514,2517,00

18,7521,2522,7525,0029,50

0,620,62 0,620,620,62

0,750,750,750,750,75

0,880,880,881,001,00

1,121,121,251,251,38

44444

44488

888

1212

1216162020

1/21/21/21/21/2

5/85/85/85/85/8

3/43/43/47/87/8

11

1 1/81 1/81 1/4

2,252,502,502,752,75

3,253,503,503,503,50

3,754,004,254,504,75

5,255,255,756,256,75

...........

3,003,253,25

3,754,004,004,004,00

4,254,504,755,005,25

5,755,756,256,757,25

2,002,002,252,252,50

2,753,003,003,003,00

3,253,253,504,004,00

4,504,505,005,506,00

CLASS 150 PIPE FLANGES, AND FLANGED FITTINGS

O

O

L

L

Flange

TABLE 8 TEMPLATES FOR DRILLING CLASS 150 FLANGES²

GENERAL NOTE: Dimensions are in inches.

NOTES:(1) Length of stud bolt does not include the height of the points. See par. 6.10.2(2) For other dimensions, see Tables 9 and 10.(3) For flange bolt holes, see para. 6.5(4) For spot facing, see para. 6.6.(5) Bolt lengths not shown in Table are determined in accordance with Annex F. See para. 6.10.2

121

1 2 3 4 5 6 7 8 9

Nominal Pipe Size


O

Drilling [ (3), (4) ]Length of Bolts (5)

L

Stud Bolts (1) Machine BoltsDiameter

ofBolt

Circle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Bolts0.06 in. Raised

FaceRing Joint

0.06 in. Raised

Face

1/23/41

1 1/41 1/2

22 1/2

33 1/2

4

568

1012

1416182024

3,754,624,885,256,12

6,507,508,259,00

10,00

11,0012,5015,0017,5020,50

23,0025,5028,0030,5036,00

2,623,253,503,884,50

5,005,886,627,257,88

9,2510,6213,0015,2517,75

20,2522,5024,7527,0032,00

0,620,750,750,750,88

0,750,880,880,880,88

0,880,881,001,121,25

1,251,381,381,381,62

44444

88888

812121616

2020242424

1/25/85/85/83/4

5/83/43/43/43/4

3/43/47/81

1 1/8

1 1/81 1/41 1/41 1/41 1/2

2,503,003,003,253,50

3,504,004,254,254,50

4,754,755,506,256,75

7,007,507,758,009,00

3,003,503,503,754,00

4,004,504,755,005,00

5,255,506,006,757,25

7,508,008,258,75

10,00

2,252,502,502,753,00

3,003,253,503,753,75

4,254,254,755,505,75

6,256,506,757,258,00




O

L

O

L

Flange


122

TABLE14 TEMPLATES FOR DRILLING CLASS 400 FLANGES²1 2 3 4 5 6 7 8 9

Nominal Pipe Size

OutsideDiameter of

FlangeO

Drilling [ (3), (4) ] Length of Bolts [ (1), (5) ]L

Diameterof

BoltCircle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Bolts

0.25 in.Raised

Face

Male and Female; also

Tonqueand

Groove

Ring Joint

1/23/41

1 1/41 1/2

22 1/23 1/2

Use Class 600 dimensions in these sizes.

4568

1012

1416182024

10,0011,0012,5015,0017,5020,50

23,0025,5028,0030,5036,00

7,889,25

10,6213,0015,2517,75

20,2522,5024,7527,0032,00

1,001,001,001,121,251,38

1,381,501,501,621,88

88

12121616

2020242424

7/87/87/81

1 1/81 1/4

1 1/41 3/81 3/81 1/21 3/4

5,505,756,006,757,508,00

8,258,759,009,50

10,50

5,255,505,756,507,257,75

8,008,508,759,25

10,25

5,505,756,006,757,508,00

8,258,759,009,75

11,00



CLASS 400 PIPE FLANGES, AND FLANGED FITTINGSO

O

L

Flange

123

TABLE 17 TEMPLATES FOR DRILLING CLASS 600 FLANGES²1 2 3 4 5 6 7 8 9

Nominal Pipe Size

OutsideDiameter of

FlangeO


Diameterof

BoltCircle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Bolts

0.25 in.Raised

Face


Tonqueand

Groove

Ring Joint

1/23/41

1 1/41 1/2

22 1/2

34

568

1012

1416182024

3,754,624,885,256,12

6,507,508,259,00

10,75

13,0014,0016,5020,0022,00

23,7527,0029,2532,0037,00

2,623,253,503,884,50

5,005,886,627,258,50

10,5011,5013,7517,0019,25

20,7523,7525,7528,5033,00

0,620,750,750,750,88

0,750,880,881,001,00

1,121,121,251,381,38

1,501,621,751,752,00

44444

88888

812121620

2020202424

1/25/85/85/83/4

5/83/43/47/87/8

11

1 1/81 1/41 1/4

1 3/81 1/21 5/81 5/81 7/8

3,003,503,503,754,25

4,254,755,005,505,75

6,506,757,508,508,75

9,2510,0010,7511,2513,00

2,753,253,253,504,00

4,004,504,755,255,50

6,256,507,258,258,50

9,009,75

10,5011,0012,75

3,003,503,503,754,25

4,254,755,005,505,75

6,506,757,758,508,75

9,2510,0010,7511,5013,25



CLASS 600 PIPE FLANGES, AND FLANGED FITTINGSO

O

L

Flange

124

1 2 3 4 5 6 7 8 9

Nominal Pipe Size

OutsideDiameter of

FlangeO

Drilling [ (3), (4) ] Length of Stud Bolts [ (1), (5) ]L

Diameterof

BoltCircle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Bolts

0.25 in.Raised

Face


Tonqueand

GrooveRing Joint

1/23/41

1 1/41 1/2

22 1/2

Use Class 1500 dimensions in these sizes.

34

568

1012

1416182024

9.5011.50

13.7515.0018.5021.5024.00

25.2527.7531.0033.7541.00

7,509,25

11,0012,5015,5018,5021,00

22,0024,2527,0029,5035,50

1,001,25

1,381,251,501,501,50

1,621,752,002,122,62

88

812121620

2020202020

7/81 1/8

11/411/813/813/813/8

11/215/817/82

2 1/2

5,756,75

7,507,508,759,25

10,00

10,7511,2512,7513,7517,25

5,506,50

7,257,258,509,009,75

10,5011,0012,5013,5017,00

5,756,75

7,507,758,759,25

10,00

11,0011,5013,2514,2518,00





O

O

L

Flange

125

1 2 3 4 5 6 7 8 9

Nominal Pipe Size


O


Diameterof

BoltCircle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Bolts

0.25 in.Raised

Face

Male and Female;

also Tonque

and Groove

Ring Joint

1/23/41

1 1/4

1 1/22

2 1/234

568

1012

1416182024

4,755,125,886,25

7,008,509,62

10,5012,25

14,7515,5019,0023,0026,50

29,5032,5036,0038,7546,00

3,253,504,004,38

4,886,507,508,009,50

11,5012,5015,5019,0022,50

25,0027,7530,5032,7539,00

0,880,881,001,00

1,121,001,121,251,38

1,621,501,752,002,12

2,382,622,883,123,62

4444

48888

812121216

1616161616

3/43/47/87/8

17/81

1 1/81 1/4

1 1/21 3/81 5/81 7/8

2

2 1/42 1/22 3/4

33 1/2

4,254,505,005,00

5,505,756,257,007,75

9,7510,2511,5013,2514,75

16,0017,5019,5021,2524,25

4,004,254,754,75

5,255,506,006,757,50

9,5010,0011,2513,0014,50

15,7517,2519,2521,0024,00

4,254,505,005,00

5,505,756,257,007,75

9,7510,5012,7513,5015,25

16,7518,5020,7522,2525,50





O

O

L

Flange

126

1 2 3 4 5 6 7 8 9

Nominal Pipe Size


O


Diameterof

BoltCircle

Diameterof

BoltHoles

Numberof

Bolts

Diameter of

Bolts

0.25 in.Raised

Face

Male and Female;

also Tonque

and Groove

Ring Joint

1/23/41

1 1/41 1/2

22 1/2

34

568

1012

5,255,506,257,258,00

9,2510,5012,0014,00

16,5019,0021,7526,5030,00

3,503,754,255,125,75

6,757,759,00

10,75

12,7514,5017,2521,2524,38

0,880,881,001,121,25

1,121,251,381,62

1,882,122,122,622,88

44444

8888

88

121212

3/43/47/81

1 1/8

11 1/81 1/41 1/2

1 3/42 2

2 1/22 3/4

4,755,005,506,006,75

7,007,758,75

10,00

11,7513,5015,0019,2521,25

4,504,755,255,756,50

6,757,508,509,75

11,5013,2514,7519,0021,00

4,755,005,506,006,75

7,008,009,00

10,25

12,2514,0015,5020,0022,00





O

O

L

Flange

127

E1 SCOPE This Annex covers gasket characteristics.

E2 GASKET MATERIALS AND CONSTRUCTION Classification of gasket materials and types is shown in Fig. E1. Other gaskets, which result in no increase in both loads or flange moment over those resulting from the gaskets included in the respective groups in this Appendix, maybe used and warrant the ratings of this Standard with the limiting dimen-sions of the applicable group. See also para. 5.4 for application of gaskets.

E3 GASKET DIMENSIONS (a) The actual dimensions of a gasket must be established by the user. Reference to a dimensional standard for gaskets, such as ANSI B 16.21, is recommended. In any case, selected dimensions should be based on the type of gasket and its characteristics. These characteristics include its density, flexibility, re- sistance to the fluid and its temperature, and the ne- cessity for satisfactorily compressing the gasket on its inside diameter, its outside diameter, or both. AIso to be considered is the question of allowing a “pocket” at the gasket inside diameter (between the flange facings), or of allowing any intrusion of the gasket in- to the flange bore. Consideration should be given to the service fluid as well as to the possibility of dam- age which might result from partially disintegrated gaskets. (b ) Limiting gasket dimensions are given in Tables E1, E2, and E3. These dimensions represent approxi-mately the maximum combinations of widths and diameters of the different types of gaskets covered which meet rating requirements. Variations which tend to reduce bolt loads and flange moments (e.g., reducing the gasket width) mav be made; however, in departing from the tabulated dimensions, consideration should be given to the stability of the gasket under high bolt loads. As a general rule, the area of unconfined nonmetallic gaskets should not be less than the total bolt area. (c) Gaskets are divided into three groups based on their gasket loading factors as shown in the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Pressure Vessels. (d ) Gasket contact widths for the three

groups are as follows: Group No. I Group No. II Group No. III Small tongue width minus 0.03 in., but not less than 0.18 in.

(e ) Gaskets of Group No. I have inside diameters equal to the outside diameter of the corresponding pipe, which follows the principle established in ANSI B16.21. In order to avoid pocketing of fluid handled, Group No. I gaskets mav be extended to the inside diameter of valves, pipe, or the bore of integral, welding neck, or socket weld type flanges. Group No. i gaskets have outside contact diameters equal to the outside diameter of the raised face. (f ) Gaskets of Group Nos. II a and ın a also have inside diameters equal to the outside diameter of the corresponding pipe. It mav be desirable under some conditions to make the inside diameter of these gaskets equal to the inside diameter of valves, pipe, or the bore of integral, welding neck, or socket weld type flanges, and this is permissible provided the gasket contact width does not exceed that shown. This provision affects gaskets shown in Figures E4, E5, E8, and E9 and requires a reduction in gasket outside diameters as well as inside diameters. Additional provisions for varying gasket widths in contact with raised face are covered in para. E3 (b). Group Nos. II b and III b have outside contact diameters equal to the outside diameter of the raised face. (g ) The outside diameter of gaskets or centering rings extending beyond the raised face is equal to the bolt circle minus one bolt diameter. This type gasket is designed to be aligned by the flange bolts. (h ) Group Nos. II a and III a gaskets are designed for those users who prefer that narrow gaskets be lo-cated close to the bore, thereby keeping the pressure area to a minimum and giving maximum flexibility to the flanged joint. See para. E3 (f ). Group Nos. II b and III b gaskets are to be located at the outside of the raised face for ease in aligning the gaskets without a centering ring. (i ) Group No. I gaskets with edges extending to the bolts (see Figure E3) are dimensionally the same as the corresponding fiat ring gaskets given in ANSI B16.21. See para E3 (c).

E4 TOLERANCES Gasket contact widths for Group Nos. II and III shall not exceed specified contact width by more than 10%.

ANNEX ELIMITING DIMENSIONS OF GASKETS

Other than Ring Joint

This Annex is an integral part of ASME/ANSI B16.5-

1988 and is placed after the main text for convenience.)

128

AN

SI B

16.

47Se

ries

B

Gasket Group

NumberGasket Material

Gasket Factor

m

MinimumDesignSeatingStressY,PSI

Sketches

la

Self-energizing types:O rings, metallic, elastomer, other gasket types considered self sealing 0 0 -

Elastomer without fabric or high percentage of asbestos fiber:Below 75 Shore durometer75 or higher Shore durometer

0.501.00

0200

Compressed sheet suitable for the operating conditions

0.12 in. thick0.06 in. thick

2.002.75

1,6003,700

Elastomer with cotton fabric insertion 1.25 400

Elastomer with asbestos fabric insertion, with or without wire reinforcement

3 ply2 ply1 ply

2.252.502.75

2.2002.9003.700

Vegetable fiber 1.75 1.100

lb

Spiral-wound metal, with asbestos or othernonmetalic filler

Carbon SteelStainless Steel or Monel

2.503.00

10.00010.000

Corrugated metal or corrugated metal double jacketed withnonmetallic filler

Soft AluminiumSoft copper or brassIron or soft steel

2.502.753.00

2.9003.7004.500

Corrugated metal Soft AluminiumSoft copper or brasb

2.753.00

3.7004.500

llaand llb

Compressed sheet suitable for the operatingconditions 0.03 in. thick 3.50 6.500

Corrugated metal or corrugated metal doublejacketed with nonmetallic filler

Monel or 4%-6% chromeStainless steels

3.253.50

5.5006.500

Corrugated metal

Iron or soft steelMonel or 4%-6% chromeStainless steels

3.253.503.75

5.5006.5007.600

Flat metal jacketed with nonmetallic filler

Soft AluminiumSoft copper or brassIron or soft steelMonel 4%-6% chromeStainless steels

3.253.503.753.503.753.75

5.5006.5007.6008.0009.0009.000

Grooved metal

Soft AluminiumSoft copper or brassIron or soft steelMonel or 4%-6% chromeStainless steels

3.253.503.753.754.25

5.5006.5007.6009.000

10.100

Solid flat metal Soft Aluminium 4.00 8.800

lllaand llb

Solid flat metal

Soft copper or brassIron or soft steelMonel or 4%-6% chromeStainless steels

4.755.506.006.50

13.00018.00021.80026.000

Iron or soft steelMonel or 4%-6% chromeStainless steels

5.506.006.50

18.00021.80026.000

129

Nominal Size

GasketContactWidth

(1)W

Fig. E2 Fig. E3

InsideDiame-

ter

OutsideDiame-

ter

InsideDiame-

ter

Outside Diameter (2)

150 300 400 600 900 1500 2500

1/23/41

1 1/4

0,270,310,340,42

0,841,061,311,66

1,381,692,002,50

0,841,061,311,66

2,122,622,883,25

2,122,622,883,25

2,122,622,883,25

2,122,622,883,25

2,502,753,123,50

2,502,753,123,50

2,753,003,384,12

1 1/22

2 1/23

0,480,620,620,75

1,912,382,883,50

2,883,624,125,00

1,912,382,883,50

3,754,385,125,88

3,754,385,125,88

3,754,385,125,88

3,754,385,125,88

3,885,626,506,62

3,885,626,506,88

4,625,756,627,75

3 1/2456

0,750,840,880,94

4,004,505,566,62

5,506,197,318,50

4,004,505,566,62

6,507,128,509,88

6,507,128,509,88

6,387,008,389,75

6,387,629,50

10,50

......8,129,75

11,38

......8,25

10,0011,12

.......9,25

11,0012,50

8101214

1,001,001,121,12

8,6210,7512,7514,00

10,6212,7515,0016,25

8,6210,7512,7514,00

12,1214,2516,6219,12

12,1214,2516,6219,12

12,0014,1216,5019,00

12,6215,7518,0019,38

14,1217,1219,6220,50

13,8817,1220,5022,75

15,2518,7521,62.......

16182024

1,251,501,501,62

16,0018,0020,0024,00

18,5021,0023,0027,25

16,0018,0020,0024,00

21,2523,5025,7530,50

21,2523,5025,7530,50

21,1223,3825,5030,25

22,2524,1226,8831,12

22,6225,1227,5033,00

25,2527,7529,7535,50

.........................

General Note: Dimensions are in inches.

NOTES:(1) Applies to both Figs. E2 and E3. Gaskets diameters may be varied. In no case, however, should the area of unconfined nonmetalic gaskets be less than that of the bolt. See para. E3(b).(2) Gaskets outside diameter may be extend, or an attached centering service may be used. The outside diameter of extended metallic gaskets or any centering ring may be 0.12 in. less than specified.(3) Slip-on type flange is shown for illustration purposes only. Gaskets may be used with other types of flange. See para. E3

(Note (1))W

(Note (2))W

(Note (2))

TABLE E1 GROUP NO. la AND lb GASKETS

FIG.E2 2 FIG.E3 3

130

No-minal Size

GasketContactWidth

(1)W

Fig. E4 Fig. E5

InsideDiame-

ter

OutsideDiame-

ter

InsideDiame-

ter

GasketContactOutsideDiame-

ter

Centering Ring Outside Diameter (2)

150 300 400 600 900 1500 2500

1/23/41

1 1/4

0,190,190,250,31

0,841,061,311,66

1,221,441,812,28

0,841,061,311,66

1,221,441,812,28

1,882,252,623,00

2,122,622,883,25

2,122,622,883,25

2,122,622,883,25

2,502,753,123,50

2,502,753,123,50

2,753,003,384,12

1 1/22

2 1/23

0,380,380,380,38

1,912,382,883,50

2,663,123,624,25

1,912,382,833,50

2,663,123,624,25

3,384,124,885,38

3,754,385,125,88

3,754,385,125,88

3,754,385,125,83

3,885,626,506,62

3,885,626,506,88

4,625,756,627,75

3 1/2456

0,380,500,500,50

4,004,505,566,62

4,755,506,567,62

4,004,505,566,62

4,755,506,567,62

6,386,887,758,75

6,507,128,509,88

6,387,008,389,75

6,387,629,50

10,50

......8,129,75

11,38

......8,25

10,0011,12

......9,25

11,0012,50

8101214

0,620,750,750,75

8,6210,7512,7514,00

9,8812,2514,2515,50

8,6210,7512,7514,00

9,8812,2514,2515,50

11,0013,3816,1217,75

12,1214,2516,6219,12

12,0014,1216,5019,00

12,6215,7518,0019,38

14,1217,1219,6220,50

13,8817,1220,5022,75

15,2518,7521,62

......

16182024

0,880,881,001,00

16,0018,0020,0024,00

17,7519,7522,0026,00

16,0018,0020,0024,00

17,7519,7522,0026,00

20,2521,6223,8828,25

21,2523,5025,7530,50

21,1223,3825,5030,25

22,2524,1226,8831,12

22,6225,1227,5033,00

25,2527,7529,7535,50

......

......

......

......


NOTES:(1) Applies to both Figs. E4 and E5. Gaskets diameters may be varied, provided the gasket contact width does not exceed that shown, subject to tolerances E4. See para. E3(d).(2) Metallic gaskets may have attached centering device. The outside diameter of any centering ring may be 0.12 in. less than specified. of extended metallic gaskets or any centering ring may be 0.12 in. less than specified.(3) Slip-on type flange is shown for illustration purposes only. Gaskets may be used with other types of flange. See para. E3 (f ).

W (Note (1)) W (Note (1))

W (Note (2))

Gasket contact

TABLE E2A GROUP NO. IIa GASKETS

FIG.E43 FIG.E5 3

131


NOTES:(1) Applies to both Figs. E6 and E7. Gaskets diameters may be varied, provided the gasket contact width does not exceed that shown, subject to tolerances E4. See para. E3(d).(2) Gaskets outside diameter may be extend, or an attached centering service may be used. The outside diameter of extended metallic gaskets or any centering ring may be 0.12 in. less than specified.(3) Slip-on type flange is shown for illustration purposes only. Gaskets may be used with other types of flange. See para. E3

Nominal Size

GasketContactWidth

(1)W

Fig. E6 Fig. E7

InsideDiame-

ter

OutsideDiame-

ter

InsideDiame-

ter


150 300 400 600 900 1500 2500

1/23/41

1 1/4

0,190,190,250,31

1,001,311,501,88

1,381,692,002,50

1,001,311,501,88

1,882,252,623,00

2,122,622,883,25

2,122,622,883,25

2,122,622,883,25

2,502,753,123,50

2,502,753,123,50

2,753,003,384,12

1 1/22

2 1/23

0,380,380,380,38

2,122,883,384,25

2,883,624,125,00

2,122,883,384,25

3,384,124,885,38

3,754,385,125,88

3,754,385,125,88

3,754,385,125,88

3,885,626,506,62

3,885,626,506,88

4,625,756,627,75

3 1/2456

0,380,500,500,50

4,755,196,317,50

5,506,197,318,50

4,755,196,317,50

6,386,887,758,75

6,507,128,509,88

6,387,008,389,75

6,387,629,50

10,50

.......8,129,75

11,38

......8,25

10,0011,12

.......9,25

11,0012,50

8101214

0,620,750,750,75

9,3811,2513,5014,75

10,6212,7515,0016,25

9,3811,2513,5014,75

11,0013,3816,1217,75

12,1214,2516,6219,12

12,0014,1216,5019,00

12,6215,7518,0019,38

14,1217,1219,6220,50

13,8817,1220,5022,75

15,2518,7521,62

......

16182024

0,880,881,001,00

16,7519,2521,0025,25

18,5021,0023,0027,25

16,7519,2521,0025,25

20,2521,6223,8828,25

21,2523,5025,7530,50

21,1223,3825,5030,25

22,2524,1226,8831,12

22,6225,1227,5033,00

25,2527,7529,7535,50

......

......

......

......

TABLE E2B GROUP NO. and IIb GASKETS

FIG.E6 3 FIG.E7 3

W (Note (1)) W (Note (1))

W (Note (2))

132

TABLE E3A GROUP NO. IIIa GASKETS


NOTES:(1) Applies to both Figs. E8 and E9. Gaskets diameters may be varied, provided the gasket contact width does not exceed that shown, subject to tolerances E4. See para. E3(d).(2) Metallic gaskets may have attached centering device. The outside diameter of any centering ring may be 0.12 in. less than specified. of extended metallic gaskets or any centering ring may be 0.12 in. less than specified.(3) Slip-on type flange is shown for illustration purposes only. Gaskets may be used with other types of flange. See para. E3 (f ).

No-minal Size

GasketContactWidth

(1)W

Fig. E8 Fig. E9

InsideDiame-

ter

OutsideDiame-

ter

InsideDiame-

ter

GasketContactOutsideDiame-

ter


150 300 400 600 900 1500 2500

1/23/41

1 1/4

0,190,190,190,19

0,841,061,311,66

1,221,441,692,03

0,841,061,311,66

1,221,441,692,03

1,882,252,623,00

2,122,622,883,25

2,122,622,883,25

2,122,622,883,25

2,502,753,123,50

2,502,753,123,50

2,753,003,384,12

1 1/22

2 1/23

0,190,190,190,19

1,912,382,883,50

2,282,753,253,88

1,912,382,883,50

2,282,753,253,88

3,384,124,885,38

3,754,385,125,88

3,754,385,125,88

3,754,385,125,88

3,885,626,506,62

3,885,626,506,88

4,625,756,627,75

3 1/2456

0,190,220,220,22

4,004,505,566,62

4,384,946,007,06

4,004,505,566,62

4,384,946,007,06

6,386,887,758,75

6,507,128,509,88

6,387,008,389,75

6,387,629,50

10,50

.....8,129,75

11,38

.....8,25

10,0011,12

.....9,25

11,0012,50

8101214

0,280,340,340,34

8,6210,7512,7514,00

9,1911,4413,4414,69

8,6210,7512,7514,00

9,1911,4413,4414,69

11,0013,3816,1217,75

12,1214,2516,6219,12

12,0014,1216,5019,00

12,6215,7518,0019,38

14,1217,1219,6220,50

13,8817,1220,5022,75

15,2518,7521,62

....

16182024

0,410,410,470,47

16,0018,0020,0024,00

16,8118,8120,9424,94

16,0018,0020,0024,00

16,8118,8120,9424,94

20,2521,6223,8828,25

21,2523,5025,7530,50

21,1223,3825,5030,25

22,2524,1226,8831,12

22,6225,1227,5033,00

25,2527,7529,7535,50

.....

.....

.....

.....

FIG.E8 3 FIG.E9 3

W (Note (2))

(Note (2))

Gasket contact W (Note (1))

133

TABLE E3B GROUP NO. IIIb GASKETS

FIG.E10 3 FIG.E11 3

Nominal Size

GasketContactWidth

(1)W

Fig. E10 Fig. E11

InsideDiame-

ter

OutsideDiame-

ter

InsideDiame-

ter

Outside Diameter (2)

150 300 400 600 900 1500 2500

1/23/41

1 1/4

0,190,190,190,19

1,001,311,622,12

1,381,692,002,50

1,001,311,622,12

1,882,252,623,00

2,122,622,883,25

2,122,622,883,25

2,122,622,883,25

2,502,753,123,50

2,502,753,123,50

2,753,003,384,12

1 1/22

2 1/23

0,190,190,190,19

2,503,253,754,62

2,883,624,125,00

2,503,253,754,62

3,384,124,885,38

3,754,385,125,88

3,754,385,125,88

3,754,385,125,88

3,885,626,506,62

3,885,626,506,88

4,625,756,627,75

3 1/2456

0,190,220,220,22

5,125,756,888,06

5,506,197,318,50

5,125,756,888,06

6,386,887,758,75

6,507,128,509,88

6,387,008,389,75

6,387,629,50

10,50

......8,129,75

11,38

.....8,25

10,0011,12

.....9,25

11,0012,50

8101214

0,280,340,340,34

10,0612,0614,3115,56

10,6212,7515,0016,25

10,0612,0614,3115,56

11,0013,3816,1217,75

12,1214,2516,6219,12

12,0014,1216,5019,00

12,6215,7518,0019,38

14,1217,1219,6220,50

13,8817,1220,5022,75

12,2518,7521,62

.....

16182024

0,410,410,470,47

17,6920,1922,0626,31

18,5021,0023,0027,25

17,6920,1922,0626,31

20,2521,6223,8828,25

21,2523,5025,7530,50

21,1223,3825,5030,25

22,2524,1226,8831,12

22,6225,1227,5033,00

25,2527,7529,7535,50

.....

.....

.....

.....


NOTES:(1) Applies to both Figs. E10 and E11. Gaskets diameters may be varied, provided the gasket contact width does not exceed that shown, subject to tolerances E4. See para. E3(d).(2) Gaskets outside diameter may be extend, or an attached centering service may be used. The outside diameter of extended metallic gaskets or any centering ring may be 0.12 in. less than specified.(3) Slip-on type flange is shown for illustration purposes only. Gaskets may be used with other types of flange. See para. E3

W (Note (1))Gasket

Gasket W (Note (1))

134

4th Edition - manfredgeldbach.com.tr

Documents