This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
The above PC is installed withWEB Browser and JAVA runtime environmentPlug-in
Note
1.It is recommended to use Internet Explore 7.0 or above toaccesstheManagedSwitch.
2.TheWGSW-20160HPispickedforthis installationguideasthey(the WGSW-24040HP and WGSW-24040HP4) come with thesameconfigurationandPoEfeature.
5
3. Terminal SetupToconfigurethesystem,connectaserialcabletoaCOM port on a PC or notebook computerand to serial (console)port of theManagedSwitch.The consoleport oftheManagedSwitch isDCEalready.So,youcanconnect theconsoleportdirectlytothePCwithouttheneedofNullModem.
PC / Workstationwith
Terminal emulation software
Serial Port
RS-232
Serial Port115200,8,n,1
A terminal program is required tomake the software connection to the ManagedSwitch. Windows’ Hyper Terminal program may be a good choice or pleasedownloadtheotherhyperterminallikesoftware,suchasputty.TheHyperTerminalcanbeaccessedfromtheStart menu.
1. Click START, then Programs, AccessoriesandthenHyper Terminal.
2.When the following screen appears, make sure that the COM port should beconfiguredas:
Baud :115200
Databits :8
Parity :None
Stopbits :1
FlowControl :None
6
4. Logon to the ConsoleOnce the terminal is connected to thedevice,poweron theManagedSwitch.Theterminalwillstartrunningtestingprocedures.
Then, the login username and password are requested. The factory defaultusername and password are as follows, and the login screen in Figures 4-1appears.
IP Address: 192.168.1.100Subnet Mask: 255.255.255.0Gateway: 192.168.1.1
Figure 5-2: Setting IP Address
4.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully configured, the Managed Switch will apply the new IPaddresssetting immediately.Youcanaccess theWeb interfaceofManagedSwitchthroughthenewIPaddress.
Note
If you are not familiar with console command or the relatedparameter, enter “help”anytimeinconsoletogetthehelpdescrip-tion.
9
6. Start Web ManagementThe following shows how to start up the Web Management of the ManagedSwitch. Note the Managed Switch is configured through an Ethernet connection.Please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100, thenthemanagerPCshouldbesetat192.168.0.x(wherexisanumberbetween1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstationwith
IE Browser
RJ-45/UTP-Cable
IP Address:192.168.0.x
IP Address:192.168.0.100
Figure 6-1: I P Management Diagram
Login the Managed Switch1.Use Internet Explorer 7.0 or above Web browser. Enter IP address
2.When the following dialog box appears, please enter the default username andpassword“admin” (or the password youhave changed via console). The loginscreeninFigure6-2appears.
The Switch Menu on the left of theWeb page lets you access all the commandsandstatisticstheManagedSwitchprovides.
Figure 6-4: Switch Menu
Note
Ifyouarenot familiarwithSwitchfunctionsortherelatedparam-eter, press “Help icon” anytime in the Web page to get the help description.
11
Now, you can use the Web management interface to continue the Switchmanagement or manage the Switch by console interface.
Please refer to the user’s manual for more.
■ Changing IP Address or forgetting admin password –To reset the IP address to the default IP Address “192.168.0.100” or reset the login password to default value, press the hardware reset button at the front panel for about 10 seconds. After the device is rebooted, you can login themanagementWEBinterfacewithinthesamesubnetof192.168.0.xx.
Customer SupportThank you for purchasing PLANET products. You can browse our online FAQresource at the PLANET website first to check if it could solve you issue. If youneedmoresupportinformation,pleasecontactPLANETswitchsupportteam.