46012239 Quartz Product Catalog

Page 1 of 30

Spartek Systems Sub Surface Quartz Pressure Gauge

Product Catalog (SS5063 - SS5067 – SS5200)

Rev 1 February 4, 2010 # 1 Thevenaz Industrial Trail, Sylvan Lake, AB T4S 2J6 www.sparteksystems.com +1 403 887-2443 [email protected]

Page 2 of 30

SS5067 – Quartz Pressure Gauge ............................................................................................................. 4

Description ................................................................................................................................................. 4 Applications ............................................................................................................................................... 4 Specifications ............................................................................................................................................ 4 Product Listing ........................................................................................................................................... 4

SS5063 – Quartz Pressure Gauge ............................................................................................................. 5 Description ................................................................................................................................................. 5 Applications ............................................................................................................................................... 5 Specifications ............................................................................................................................................ 5 Product Listing ........................................................................................................................................... 5

SS5200 – Quartz Pressure Gauge ............................................................................................................. 6 Description ................................................................................................................................................. 6 Applications ............................................................................................................................................... 6 Specifications ............................................................................................................................................ 6 Product Listing ........................................................................................................................................... 6

1.27” Bullnose and Crossovers ................................................................................................................. 7 Description ................................................................................................................................................. 7 Specifications ............................................................................................................................................ 7 Product Listing ........................................................................................................................................... 7

0.75” Bullnose and Crossovers ................................................................................................................. 8 Description ................................................................................................................................................. 8 Specifications ............................................................................................................................................ 8 Product Listing ........................................................................................................................................... 8

1.27” & 1.3125” Battery Housings ............................................................................................................. 9 Description ................................................................................................................................................. 9 Specifications ............................................................................................................................................ 9 Product Listing ........................................................................................................................................... 9

0.75” Battery Housings ............................................................................................................................. 10 Description ............................................................................................................................................... 10 Specifications .......................................................................................................................................... 10 Product Listing ......................................................................................................................................... 10

1.27” Gauge Carrier Adapters .................................................................................................................. 11 Description ............................................................................................................................................... 11 Specifications .......................................................................................................................................... 11 Product Listing ......................................................................................................................................... 11

0.75” Gauge Carrier Adapters .................................................................................................................. 12 Description ............................................................................................................................................... 12 Specifications .......................................................................................................................................... 12 Product Listing ......................................................................................................................................... 12

1.4375” Quartz SRO Assembly ................................................................................................................ 13 Description ............................................................................................................................................... 13 Specifications .......................................................................................................................................... 13 Product Listing ......................................................................................................................................... 13

1.00” Quartz SRO Assembly .................................................................................................................... 14 Description ............................................................................................................................................... 14 Specifications .......................................................................................................................................... 14 Product Listing ......................................................................................................................................... 14

0.75” Quartz SRO Assembly .................................................................................................................... 15 Description ............................................................................................................................................... 15 Specifications .......................................................................................................................................... 15 Product Listing ......................................................................................................................................... 15

0.75” & 1.27” Quartz Bombwells ............................................................................................................. 16 Description ............................................................................................................................................... 16 Specifications .......................................................................................................................................... 16 Product Listing ......................................................................................................................................... 16

Table of Contents


Page 3 of 30

Tool String Shock Absorbers .................................................................................................................. 17

Description ............................................................................................................................................... 17 Specifications .......................................................................................................................................... 17 Product Listing ......................................................................................................................................... 17

Tool String Centralizers ............................................................................................................................ 18 Description ............................................................................................................................................... 18 Specifications .......................................................................................................................................... 18 Product Listing ......................................................................................................................................... 18

Tool String Weight Stem .......................................................................................................................... 19 Description ............................................................................................................................................... 19 Specifications .......................................................................................................................................... 19 Product Listing ......................................................................................................................................... 19

Tool String Running Heads ...................................................................................................................... 20 Description ............................................................................................................................................... 20 Operation ................................................................................................................................................. 20 Specifications .......................................................................................................................................... 20 Product Listing ......................................................................................................................................... 20

Tool String Running Tools ....................................................................................................................... 21 Description ............................................................................................................................................... 21 Operation ................................................................................................................................................. 21 Specifications .......................................................................................................................................... 21 Product Listing ......................................................................................................................................... 21

Tool String No-Blow Hold Down .............................................................................................................. 22 Description ............................................................................................................................................... 22 Operation ................................................................................................................................................. 22 Specifications .......................................................................................................................................... 22 Product Listing ......................................................................................................................................... 22

Tool String Pulling Tools .......................................................................................................................... 23 Description ............................................................................................................................................... 23 Specifications .......................................................................................................................................... 23 Product Listing ......................................................................................................................................... 23

Elastomer Selection Guide ....................................................................................................................... 24 Description ............................................................................................................................................... 24

Quartz Gauge Elastomers ........................................................................................................................ 25 Description ............................................................................................................................................... 25 Product Listing ......................................................................................................................................... 25

Grease and Lubricants ............................................................................................................................. 26 Description ............................................................................................................................................... 26 Product Listing ......................................................................................................................................... 26

Quartz Gauge Cases ................................................................................................................................. 27 Description ............................................................................................................................................... 27 Product Listing ......................................................................................................................................... 27

Quartz Gauge Hand Tools ........................................................................................................................ 28 Description ............................................................................................................................................... 28 Product Listing ......................................................................................................................................... 28

Manuals, Software & Accessories ........................................................................................................... 29 Description ............................................................................................................................................... 29 Product Listing ......................................................................................................................................... 29

Battery Packs ............................................................................................................................................ 30 Description ............................................................................................................................................... 30 Product Listing ......................................................................................................................................... 30

Table of Contents


Page 4 of 30

Description The SS5067 quartz pressure tool uses industry proven quartz transducer technology to provide superior data quality and stability. Through the use of the hybridized internal electronics, inconel or monel pressure housings and a metal to metal C-Ring seal configuration, the SS5067 is designed to operate for extended periods in standard or sour environments at high temperatures reaching a maximum of 177°C and pressure ranges reaching in excess of 25,000 psi. These features make it ideal for jobs where data quality and data capture is paramount in environments and applications that exceed the limits of standard piezoresistive sensors.

Applications

Well testing Monitor well performance Completion Diagnostics Well stimulation Reservoir characterization

Specifications

Gauge OD 1.27” or 1.31” (required for 25000 psi) Make up Length 9.153” – complete tool varies with configuration Pressure rating

(psi) 10000, 16000, 20000, 25000

Temperature rating (° C) 150, 177

Material Inconel 718 or Monel (MP35N) Accuracy and Resolution (% of full scale) Pressure Temperature

Accuracy 0.020% Accuracy 0.25° C Resolution 0.00006% Resolution <0.005° C

Drift < 0.020% / year Memory 1,000,000 data points

Optional 2,000,000 or 4,000,000

Product Listing

ID Description 10011347 SS5067 - Quartz (QD) - 150° C - 10000 psi - 5V 1.27D 10017236 SS5067 - Quartz (QD) - 177° C - 10000 psi - 5V 1.27D 10011348 SS5067 - Quartz (QD) - 177° C - 16000 psi - 5V 1.27D 10011349 SS5067 - Quartz (QD) - 177° C - 20000 psi - 5V 1.27D 10011350 SS5067 - Quartz (QD) - 177° C - 25000 psi - 5V 1.31D

SS5067 – Quartz Pressure GaugeSub Surface Q

uartz Pressure Gauge


Page 5 of 30


Sub Surface Quartz Pressure G

auge

Description The SS5063 quartz pressure tool uses industry proven quartz transducer technology to provide superior data quality and stability. Through the use of the hybridized internal electronics and inconel pressure housings, the SS5063 is designed to operate for extended periods in standard or sour environments, temperatures reaching a maximum of 177°C, pressure ranges reaching in excess of 16,000 psi and where potential restrictions or deployment methods require a gauge with a smaller diameter but where data quality and stability cannot be compromised. These features make the SS5063 ideal for jobs where data quality and data capture is paramount in environments and applications that exceed the limits of standard piezoresistive sensors.

Applications


Specifications

Gauge OD 0.75” Make Up Length 12.22” – complete tool varies with configuration Pressure rating

(psi) 10000, 16000

Temperature rating (° C) 150, 177

Material Inconel 718 Accuracy and Resolution (% of full scale) Pressure Temperature

Accuracy 0.020% Accuracy 0.25° C Resolution 0.00006% Resolution <0.005° C

Drift < 0.020% / year Memory 1,000,000 data points

Optional 2,000,000 or 4,000,000

Product Listing

ID Description 10011345 SS5063 - Quartz (QD) - 150° C - 10000 psi - 5V 0.75D 10011346 SS5063 - Quartz (QD) - 177° C - 16000 psi - 5V 0.75D

SS5063 – Quartz Pressure Gauge

Page 6 of 30


auge

Description The SS5200 quartz pressure tool uses industry proven quartz transducer technology to provide superior data quality and stability. Through the use of the hybridized internal electronics, inconel or monel pressure housings and a metal to metal seal configuration, the SS5200 is designed to operate for extended periods in standard or sour environments at temperatures that approach or reach 200°C and pressure ranges reaching in excess of 25,000 psi. These features make it ideal for jobs where data quality and data capture is paramount in environments and applications that exceed the limits of standard piezoresistive sensors and most conventional quartz pressure gauges.

Applications


Specifications

Gauge OD 1.27” or 1.31” (required for 25000 psi) Make Up Length 19.614” – complete tool varies with configuration Pressure rating

(psi) 16000, 20000, 25000

Temperature rating (° C) 200

Material Inconel 718 or Monel (MP35N) Accuracy and Resolution (% of full scale)

Pressure Temperature Accuracy 0.020% Accuracy 0.25° C

Resolution 0.00006% Resolution <0.005° C Drift < 0.020% / year

Memory 500,000 data points

Product Listing

ID Description 10011351 SS5200 - Quartz (QD) - 200° C - 16000 psi - 5V 1.27D 10011352 SS5200 - Quartz (QD) - 200° C - 20000 psi - 5V 1.27D 10011353 SS5200 - Quartz (QD) - 200° C - 25000 psi - 5V 1.31D


SS5200 – Quartz Pressure Gauge

Page 7 of 30


auge

Description The SS5067 and SS5200 use common bullnose and crossovers between the models. These parts are all a diameter of 1.27” regardless of pressure rating. They are used as either the connection point between 2 (or more) gauges, the bottom of a gauge string or when being connected to a system or device via NPT connection.

Specifications

Bullnose OD 1.27”

Make Up Length 7.000” Material 316 Stainless Steel

Box Thread 1.111”-12 TPI Stub Acme Crossovers

OD 1.27” Length 7.000”

Material 316 Stainless Steel Common Box Thread 1.111”-12 TPI Stub Acme BOX 10008677 Box Thread ¼”-16 UNF 10008573 Box Thread ¼” NPT

Product Listing

ID Description 10008420 Quartz - 1.27" Bullnose - 1.111"-12 TPI SA Box 10008677 Quartz - 1.27" Crossover - 1.111"-12 TPI SA Box - 0.75"-16 UNF Box 10008573 Quartz - 1.27" Crossover - 1.111"-12 TPI SA Box – 0.25” NPT Box


10008420 10008677 10008573

1.27” Bullnose and Crossovers

Page 8 of 30


auge

Description The SS5063 has a bullnose and crossover that are unique to this model specifically. These parts are all a diameter of 0.75” regardless of pressure rating. They are used as either the connection point between 2 (or more) gauges, the bottom of a gauge string or when being connected to a system or device via NPT connection.

Specifications

Bullnose OD 0.75”

Make Up Length 2.900” Material 316 Stainless Steel

Box Thread 0.625”-UNEF 2B Crossovers

OD 0.75” Length 3.150”

Material 316 Stainless Steel Common Box Thread 0.625”-UNEF 2B 10004119 Box Thread 9/16”-18 UNF–2B 10018513 Box Thread ¼”-18 NPT

Product Listing

ID Description 10004118 Quartz - 0.75” Bull Nose – 0.625”-UNEF 2B Box 10004119 Quartz - 0.75” Crossover – 0.625”-UNEF 2B Box – 9/16”-18 UNF-2B Box 10018513 Quartz - 0.75” Crossover – 0.625”-UNEF 2B Box – ¼”-18 NPT


0.75” Bullnose and Crossovers

10004118 10004119 10018513

Page 9 of 30


auge

Description The SS5067 and SS5200 use similar battery housings between the models. These parts are available in diameters of 1.27” or 1.3125” and various lengths depending on the duration of the job, maximum pressure expected downhole as well as the environment in the wellbore. They are used are used to house the batteries required to run the SS5067 and SS5200 in memory mode. They are machined with tolerances and internal dimensions to ensure that the battery pack is protected and has no space to disconnect from the gauge during the installation and survey process. This, along with the locking battery pack connector, ensures that all possible precautions are taken to ensure a successful run is made and all required data is retrieved.

Specifications

OD 1.27” or 1.31” (required for 25000 psi) Make Up Length Varies depending on battery length

Material Inconel 718 or Monel (MP35N) for 25,000 psi Box Thread 1.111”-12 TPI Stub Acme Pin Thread 0.75”-16 UNF-2A

Product Listing

ID Description 10008551 Quartz - 1.27" - Battery Housing - 2 "C" Cell - 718 10008719 Quartz - 1.27" - Battery Housing - 3 "C" Cell - 718 10009152 Quartz - 1.27" - Battery Housing - 4 "C" Cell – 718 10017237 Quartz - 1.27" - Battery Housing - 6 "C" Cell – 718 10017087 Quartz - 1.27" - Battery Housing - 6 "C" Cell – MP35N 10011618 Quartz - 1.3125" - Battery Housing - 2 "C" Cell – MP35N 10012543 Quartz - 1.3125" - Battery Housing - 3 "C" Cell – MP35N 10007764 Quartz - 1.3125" - Battery Housing - 4 "C" Cell – MP35N 10011309 Quartz - 1.3125" - Battery Housing - 6 "C" Cell – MP35N


*Note image is a 3 “C” Cell configuration*

1.27” & 1.3125” Battery Housings

Page 10 of 30


auge

Description The SS5063 has a bullnose and crossover that are unique to this model specifically. These parts are available in diameters of 0.75 and various lengths depending on the duration of the job, maximum pressure expected downhole as well as the environment in the wellbore. They are used are used to house the batteries required to run the SS5063 in memory mode. They are machined with tolerances and internal dimensions to ensure that the battery pack is protected and has no space to disconnect from the gauge during the installation and survey process. This ensures that all possible precautions are taken to ensure a successful run is made and all required data is retrieved.

Specifications

OD 0.75” Make Up Length Varies depending on battery length

Material Inconel 718 Box Thread 0.666-24 TPI Pin Thread 0.5625”-18 UNF-2A

Product Listing

ID Description 10003840 Quartz / Sapphire - 0.75" - Battery Housing - 2 "AA" Cell - 718 10004690 Quartz / Sapphire - 0.75" - Battery Housing - 3 "AA" Cell - 718 10013548 Quartz / Sapphire - 0.75" - Battery Housing - 4 "AA" Cell - 718



0.75” Battery Housings

Page 11 of 30


auge


Description

The SS5067 and SS5200 use similar gauge carrier adapters between the models. These parts are available in a diameter of 1.27” and set up to monitor either the pressure within the tubing string or the annular pressure outside the tubing string. They are used are used to run the SS5067 and SS5200 quartz gauges when they deployed on a gauge carrier in the downhole tubing string for various applications

Specifications

OD 1.27” Make Up Length 9.338”

Material Inconel 718 or Monel (MP35N) Box Thread 1.111”-12 TPI Stub Acme

Adapter thread 3/8-24 UNF-2A LHT Collar Thread 3/8-24 UNF-2B LHT

Product Listing

ID Description 10015541 Quartz - 1.27" Gauge Carrier Adapter Annulus Assembly - 718 10015540 Quartz - 1.27" Gauge Carrier Adapter Tubing Assembly - 718 10015063 Quartz - 1.27" Gauge Carrier Adapter Annulus Assembly – MP35N 10015062 Quartz - 1.27" Gauge Carrier Adapter Tubing Assembly – MP35N

*Note image is an annulus adapter assembly*

1.27” Gauge Carrier Adapters

*Note image is a tubing adapter assembly*

Page 12 of 30


auge


Description The SS5063 use gauge carrier adapter’s specific to this model. These parts are available in a diameter of 0.75” and set up to monitor either the pressure within the tubing string or the annular pressure outside the tubing string. They are used are used to run the SS5063 quartz gauges when they deployed on a gauge carrier in the downhole tubing string for various applications

Specifications


Material Inconel 718 Box Thread 0.625”-UNEF 2B

Adapter thread 3/8-24 UNF-2A LHT Collar Thread 3/8-24 UNF-2B LHT

Product Listing

ID Description 10015545 Quartz – 0.75" Gauge Carrier Adapter Annulus Assembly - 718 10015544 Quartz – 0.75" Gauge Carrier Adapter Tubing Assembly - 718

0.75” Gauge Carrier Adapters

*Note image is a tubing adapter assembly*

*Note image is an annulus adapter assembly*

Page 13 of 30


auge

Description The 1.4375” Quartz SRO Assembly allows the SS5067, SS5200 and SS5063 models to run in a downhole surface acquisition mode that transmits data real time on a 7/32” electronic slickline or “braided” line using a standard 1.4375” GO Cablehead. The SRO Assembly is run in place of a standard battery housing configuration on a single gauge. The single gauge is then run downhole and is able to transmit its data to surface. The SRO Assembly consists of an industry standard GO Cablehead which is then crossed over to the standard 7 pin Spartek Quartz gauge connector. A series of inner assembly springs along with a Spartek Quartz model specific adapter ensures that that connection maintains its integrity as the gauge is deployed providing all possible precautions to ensure a successful run is made and all required data is successfully transmitted to surface.

Specifications

OD 1.4375” Make Up Length 16.725

Housing Material 4140 L-80 & 17-4 Stainless Steel Box Thread Varies depending on gauge configuration

Electric Cable OD 7/32” Electric slickline

Product Listing

Complete Quartz SRO Assembly ID Description

10012464 Quartz - 1.27" - SRO - 1.4375" Cablehead Assembly - 7/32" Electric Slickline

10012465 Quartz / Sapphire - 0.75" - SRO - 1.4375" Cablehead Assembly - 7/32" Electric Slickline

Spare or Sub-Component Parts ID Description

10000117 SRO - 1.4375" Cablehead - 7/32" Electric Slickline

10003717 SRO - 1.4375" Cablehead - Spartek 1.25" & 1.27" Gauge 7 Pin Connector Crossover Assembly

10009829 SRO - 1.4375D Cablehead - 1.27" Quartz Gauge Adapter

10007286 SRO- 1.4375" & 1.00" Cablehead to Spartek 0.75”, 1.00”, 1.25” Gauge 7 pin Connector Crossover Assembly

10003681 SRO - 1.4375" Cablehead - 0.75" Quartz / Sapphire Gauge Adapter

10000668 SRO Cablehead (all sizes) - Wave Spring - 0.965” – 1.27” & 1.25” Gauges

10000665 SRO Cablehead (all sizes) - Wave Spring - 0.625" - 0.75”, 1.00” & 1.25" Gauges


1.4375” Quartz SRO Assembly

Page 14 of 30


auge

Description The 1.00” Quartz SRO Assembly allows the SS5063 model to run in a downhole surface acquisition mode that transmits data real time on a 7/32” electronic slickline or “braided” line using a standard 1.00” GO Cablehead. The SRO Assembly is run in place of a standard battery housing configuration on a single gauge. The single gauge is then run downhole and is able to transmit its data to surface. The SRO Assembly consists of an industry standard GO Cablehead which is then crossed over to the standard 7 pin Spartek Quartz gauge connector. A series of inner assembly springs along with a Spartek Quartz model specific adapter ensures that that connection maintains its integrity as the gauge is deployed providing all possible precautions to ensure a successful run is made and all required data is successfully transmitted to surface.

Specifications

OD 1.00” Make Up Length 16.500

Material 4140 L-80 & 17-4 Stainless Steel Box Thread Varies depending on gauge configuration


Product Listing




10000076 SRO - 1.00" Cablehead - 7/32" Electric Slickline 10018489 SRO - 1.00" Cablehead - 0.75" Quartz / Sapphire Gauge Adapter

10007286 SRO- 1.4375" & 1.00" Cablehead to Spartek 0.75" Gauge 7 pin Connector Crossover Assembly




Page 15 of 30


auge

Description The 0.75” Quartz SRO Assembly allows the SS5063 model to run in a downhole surface acquisition mode that transmits data real time on a 7/32” electronic slickline or “braided” line using a standard 0.75” GO Cablehead. The SRO Assembly is run in place of a standard battery housing configuration on a single gauge. The single gauge is then run downhole and is able to transmit its data to surface. The SRO Assembly consists of an industry standard GO Cablehead which is then crossed over to the standard 7 pin Spartek Quartz gauge connector. A series of inner assembly springs along with a Spartek Quartz model specific adapter ensures that that connection maintains its integrity as the gauge is deployed providing all possible precautions to ensure a successful run is made and all required data is successfully transmitted to surface.

Specifications


Material 4140 L-80 & 17-4 Stainless Steel Box Thread Varies depending on gauge configuration


Product Listing




10012477 SRO - 0.75" Cablehead - 7/32" Electric Slickline 10002452 SRO - 0.75" Cablehead - 0.75" Quartz / Sapphire Gauge Adapter


10002957 SRO- 0.75" Cablehead to Spartek 0.75" Gauge 7 pin Connector Crossover Assembly



Page 16 of 30


auge

Description

The Quartz Bombwell carriers are designed to work with the SS5067 and SS5063 model quartz gauges. The gauges are housed within the bombwell with cushioning springs on the top and bottom of the gauges. These springs provide a cushion to protect the gauges from vibrations and/or tubing movement, care should be taken to ensure the springs are not bottomed out on the gauges in order to provide the proper protection. The Bombwells also provide a protective cover for the gauges against harmful wellbore conditions; care should be taken to ensure that a proper inhibitor agent is used inside the bombwell if the gauges are being run in a harsh or sour environment.

Specifications

Bombwell for 0.75” QuartzOD 1.25”

Make Up Length Varies depending on gauge configuration Material 17-4 Stainless Steel

Fish Neck Pin Thread 5/8” Sucker Rod Bombwell for 1.27” Quartz

OD 1.66” Make Up Length Varies depending on gauge configuration

Material 17-4 Stainless Steel Fish Neck Pin Thread 5/8” Sucker Rod

Product Listing

Quartz Bombwell Assembly ID Description

10020401 Quartz - 0.75" x 2 - (2 cell "AA" battery configuration) - 1.25" - Bombwell Carrier Assembly

10020458 Quartz – 1.27" x 2 - (3 cell "C" battery configuration) - 1.66" - Bombwell Carrier Assembly


0.75” & 1.27” Quartz Bombwells

Page 17 of 30


auge

Description The Quartz Shock absorbers are designed to limit the shock transmitted to the gauges due to setting or pulling operations in which jarring or heavy force is used to set the tool string.

Specifications

Shock Absorber for 0.75” Quartz OD 0.75”

Make Up Length Varies depending on gauge configuration Material 4140 L80

Fish Neck Pin Thread 5/8” Sucker Rod Shock Absorber for 1.27” Quartz OD 1.25”

Make Up Length 19.7” – Static Uncompressed position Material 4140 L80

Fish Neck Pin Thread 0.938”-10 UNC Box Thread 0.75”-16 UNF 2A or 0.938”-10 UNC

Product Listing

Quartz Shock Absorber Assembly ID Description

10009493 Wireline Tool String - 1.25" - Shock Absorber Assembly - 0.938"-10 UNC Pin x 0.75"-16 UNF Box

10009333 Wireline Tool String - 1.25" - Shock Absorber Assembly - 0.938"-10 UNC Pin x 0.938"-10 UNC Box


Tool String Shock Absorbers

Page 18 of 30


auge

Description The Tool String Centralizers use a bow spring design to centralize the downhole tool string in large diameter tubing and casings. Depending on the tool string configuration and connection requirements there are crossovers and a bullnose available to mate this centralizer to a 0.625” Sucker Rod Connection, below or above a Spartek 1.27”Quartz, or above a Spartek 0.75” Quartz gauge.

Specifications

Nominal OD 1.50” Maximum OD 7.00”

Make Up Length Varies depending on gauge configuration Material 4140 L80

Pin Thread 0.625” Sucker Rod Box Thread 0.625” Sucker Rod

Product Listing

Quartz Centralizer Assembly ID Description

10019288 Wireline Tool String - Bow Spring Centralizer - 1.50" Nominal OD - 7.00" Maximum OD

Crossovers and BullnoseID Description

10008622 Wireline Tool String - 1.25" Crossover 0.625" Sucker Rod Pin - 0.750"-16 UNF Box

10011648 Wireline Tool String - 1.25" Crossover - 0.625" Sucker Rod Box - 0.750"-16 UNF Pin

10019290 Wireline Tool String - 1.50" Centralizer Bullnose - 0.625" Sucker Rod Pin

10010435 Wireline Tool String - 1.25" Crossover - 0.625" Sucker Rod Pin - 0.5625"-18 UNF-Box

Spare PartsID Description

10020913 Wireline Tool String - Bow Spring Centralizer - 1.50" Nominal OD - 7.00" Maximum OD - Bow Spring

10020914 Wireline Tool String - Bow Spring Centralizer - 1.50" Nominal OD - 7.00" Maximum OD - Spring Sub

10020915 Wireline Tool String - Bow Spring Centralizer - 1.50" Nominal OD - 7.00" Maximum OD - Spring


Tool String Centralizers

Page 19 of 30


auge

Description The Tool String Weight Stem provides additional weight to a given tool string in order to aid in downhole deployment given a known bottom hole pressure.

Specifications

Nominal OD 0.75” 1.00” 1.25” 1.50” Maximum OD 0.75” 1.00” 1.25” 1.50” Fishneck OD 0.75” 1.00” 1.187” 1.375”

Make Up Length 5 ft Material 4140 L80

0.75”Pin Thread 0.5”-13 UNC

Box Thread 0.5”-13 UNC 1.00”

Pin Thread 0.625”-11 UNC Box Thread 0.625”-11 UNC

1.25” & 1.50”Pin Thread 0.938”-10 UN

Box Thread 0.938”-10 UN

Product Listing

ID Description 10020916 Wireline Tool String - Weight Stem - 0.75" OD - 5ft length 10020917 Wireline Tool String - Weight Stem – 1.00" OD - 5ft length 10020918 Wireline Tool String - Weight Stem – 1.25" OD - 5ft length 10020919 Wireline Tool String - Weight Stem – 1.50" OD - 5ft length


Tool String Weight Stem

Page 20 of 30


auge

Description The Tool String “J” Latch Running Heads are used to release downhole tool strings (including Spartek Gauges) for extended pressure surveys. The running head is threaded onto the top of the tool string that is to remain downhole and is the part that is latched onto when pulling the tool string after the survey is complete.

Operation Install the “J” Latch Running Head into the “J” Latch Running Tool (see page 21) and lower into the wellbore to desired depth. Set down gently on top of a pre run no-go, the toolstring weight will actuate the “J” Latch Running Tool and “J” off of the J Latch Running Head. Remove the toolstring from the wellbore

Specifications

Nominal OD 0.75” 1.00” 1.18” 1.37” Maximum OD 1.00” 1.42” 1.75” 1.75” Fishneck OD 0.75” 1.00” 1.187” 1.375”

Material 4140 L80 0.75”


1.00” Pin Thread 0.625”-11 UNC

Box Thread 0.625”-11 UNC 1.18” & 1.37”

Pin Thread 0.75”-16 UNF Box Thread 0.75”-16 UNF

Product Listing

ID Description 10020920 Wireline Tool String – “J” Latch Running Head – 0.75” OD 10020921 Wireline Tool String – “J” Latch Running Head – 1.00” OD 10020923 Wireline Tool String – “J” Latch Running Head – 1.18” OD 10020922 Wireline Tool String – “J” Latch Running Head – 1.37” OD


Tool String Running Heads

Page 21 of 30


auge

Description The Tool String “J” Latch Running Heads are used to release downhole tool strings (including Spartek Gauges) for extended pressure surveys. The running head is threaded onto the top of the tool string that is to remain downhole and is the part that is latched onto when pulling the tool string after the survey is complete.

Operation

Attach the “J” Latch Running Tool to the toolstring and install equipment to be run with a “J” Latch Running Head, lower into the wellbore to desired depth. Set down gently on top of a pre run no-go, the toolstring weight will actuate the “J” Latch Running Tool and “J” off of the “J” Latch Running Head. Remove the toolstring from the wellbore.

Specifications

Nominal OD 0.75” 1.00” 1.18” 1.37” Maximum OD 1.00” 1.75” 1.50” 1.75”

Material 4140 L80 0.75”


1.00” Pin Thread 0.625”-11 UNC

Box Thread 0.625”-11 UNC 1.18” & 1.37”


Product Listing

ID Description 10020925 Wireline Tool String - "J" Latch Running Tool - 0.75" OD 10020926 Wireline Tool String - "J" Latch Running Tool – 1.00" OD 10020927 Wireline Tool String - "J" Latch Running Tool – 1.187" OD 10020928 Wireline Tool String –“J" Latch Running Tool – 1.37" OD


Tool String Running Tools

Page 22 of 30


auge

Description The Tool String No-Blow Hold Downs are used to prevent a tool string (including Spartek Gauges) from flowing up a well during any testing programs being performed.

Operation

The No-Blow Hold Down Tool is commonly run in conjunction with a “J” Latch Running Head. Attach the No-Blow Hold Down Tool as well as any accessories to the toolstring and lower carefully into the wellbore to desired depth, set down on pre ran no-go and “J” off using a “J” Latch Running tool. The action of the setting the tools string will actuate the dogs through two 180 degree slots on the lower end of the tool. The when the spring applies moderate tension on the push rod the dogs are rotated out and the serrated jaws come to rest on the I.D of the tubing wall. The toolstring is then removed from the wellbore.

Specifications

Nominal OD 2.00” 2.50” 3.00” 4.50” 5.50” 7.00” Tubular Size 2.375” 2.875” 3.50” 4.50” 5.50” 7.00”

Material 4140 L80 Pin Thread 0.75”-16 UNF

Box Thread 0.75”-16 UNF

Product Listing

Complete Tool Assembly ID Description

10020929 Wireline Tool String - No-Blow Hold Down – 2.00" for 2.375" Tubulars 10020930 Wireline Tool String - No-Blow Hold Down – 2.50" for 2.875" Tubulars 10020931 Wireline Tool String - No-Blow Hold Down – 3.00" for 3.50" Tubulars 10020932 Wireline Tool String - No-Blow Hold Down – 4.50" for 4.50" Tubulars 10020933 Wireline Tool String - No-Blow Hold Down – 5.50" for 5.50" Tubulars 10020934 Wireline Tool String - No-Blow Hold Down – 7.00" for 7.00" Tubulars

Replacement Dog (2 required per each No-Blow Hold Down Tool)ID Description

10020935 Wireline Tool String - No-Blow Hold Down – 2.00" - Replacement Dog 10020936 Wireline Tool String - No-Blow Hold Down – 2.50" - Replacement Dog 10020937 Wireline Tool String - No-Blow Hold Down – 3.00" - Replacement Dog 10020938 Wireline Tool String - No-Blow Hold Down – 4.50" - Replacement Dog 10020939 Wireline Tool String - No-Blow Hold Down – 5.50" - Replacement Dog 10020940 Wireline Tool String - No-Blow Hold Down – 7.00" - Replacement Dog


Tool String No-Blow Hold Down

Page 23 of 30


auge

Description The Tool String “JDC” or “RS” Pulling Tools are used to retrieve a tool string (including Spartek Gauges) from the wellbore when a jarring tool is not required. These tools can also be used in setting a tool string in which jarring is required in order to set the tool string

Specifications

Nominal OD 0.75” 1.375” 1.625” 2.00” Maximum OD 0.968” 1.375 1.625” 1.86”

Fishneck size latched 0.75” 1.00” 1.187” 1.375” Material 4140 L80

“RS” Thread Configuration 0.75” Pin Thread 0.625”-11 UN

Box Thread 0.25” NC “JDC” Thread Configuration 1.375”

Pin Thread 0.938”-10 UN Box Thread 0.25”-20 UNC

“JDC” Thread Configuration 1.625” & 2.00” Pin Thread 0.938”-10 UN

Box Thread 0.50”-13 UNC

Product Listing

ID Description 10020942 Wireline Tool String – ‘RS’ Pulling Tool - 0.75" 10020944 Wireline Tool String – ‘JDC’ Pulling Tool - 1.375" 10020945 Wireline Tool String – ‘JDC’ Pulling Tool - 1.625" 10020946 Wireline Tool String – ‘JDC’ Pulling Tool - 2.00"


Tool String Pulling Tools

Page 24 of 30


auge

Description The following basic guidelines when selecting which elastomers to apply for dressing the equipment for field use: Standard Service (Sweet):

• Default option for standard service (sweet) tools • Temperature Rating: <150°C • H2S Concentration:

o <5% below 150°C • O-Ring: Viton • Backup: PEEK-Split

Sour Service (Medium Concentration):

• Default option for sour service tools • Temperature Rating: 5°C - 218°C • H2S Concentration:

o Below 150°C: <20% o Above 150°C: <7%

• C-Ring (if applicable): OD = 1.27”, Inconel 718 NACE, Nickel Plated, External Pressure

• O-Ring: Aflas • Backup: PEEK - Split

Sour Service (High Concentration):

• Temperature Rating: -20°C - 250°C • H2S Concentration:

o Below 150°C: >20% o Above 150°C: >7%

• C-Ring (if applicable): OD = 1.27”, Inconel 718 NACE, Nickel Plated, External Pressure

• O-Ring: Chemraz • Backup: PEEK - Split

NOTE: *Explosive Decompression (ED): All compounds listed here are ED resistant which occurs when diffused gases (such as carbon dioxide [CO2]) are rapidly decompressed which causes internal ruptures and blistering of the elastomer. Reference: http://www.sealseastern.com/SelectOilfieldMtl.asp


Elastomer Selection Guide

Page 25 of 30


auge

Description

Once the criteria for which elastomer selection is suitable for the application, there are three groupings for elastomers; 1) Initial Dressings – these are the elastomers that will be used to dress the tool, and in some cases its accessories, initially when it leaves the Spartek facility. 2) Redress Kits – these kits are used to redress a single field joint once the tool has been run downhole. 3) Bulk/Individual o-rings which can be purchased to stock a lab or gauge preparation area the client may have in their location.

Product Listing

Gauge and Accessory Initial Dressing Options ID Description

10017718 Quartz - 1.27” - Initial Dressing - Aflas/PEEK - default sour service option 10017719 Quartz - 1.27” - Initial Dressing - Chemraz/PEEK 10017721 Quartz - 0.75” - Initial Dressing - Aflas/PEEK - default sour service option 10017722 Quartz - 0.75” - Initial Dressing - Chemraz/PEEK 10017728 Quartz - 1.27” - Initial Dressing – GC Adapter - Aflas/PEEK - default sour service option 10017729 Quartz - 1.27” - Initial Dressing - GC Adapter - Chemraz/PEEK 10017725 Quartz – 0.75” - Initial Dressing - GC Adapter - Aflas/PEEK - default sour service option 10017726 Quartz – 0.75” - Initial Dressing - GC Adapter - Chemraz/PEEK

Gauge and Accessory Redress Kit OptionsID Description

10011310 Quartz – 1.27” - Redress Kit - Field Joint 2-212/C-Ring AFLAS/Peek/Nickel (sour-med) 10011311 Quartz – 1.27” - Redress Kit - Field Joint 2-212/C-Ring CHEMRAZ/Peek/Nickel (sour-high) 10010848 Quartz – 0.75” - Redress Kit - Field Joint 2-014 AFLAS/Peek (sour-med) 10010850 Quartz – 0.75” - Redress Kit - Field Joint 2-014 CHEMRAZ/Peek (sour-high) 10015636 Quartz/Sapphire - 0.75"/1.27” – Redress Kit - GC Adapter - Sour-Medium (Aflas/PEEK) 10016261 Quartz/Sapphire - 0.75"/1.27" – Redress Kit - GC Adapter - Sour-High (Chemraz/PEEK)

Individual ElastomersID Description

10008985 Quartz/Sapphire – 1.27”/1.25” - O-Ring - 2-212 - Aflas - 7182B - 90D 10005525 Quartz/Sapphire – 1.27”/1.25” - O-Ring - 2-212 – Chemraz – 510 - 90D 10008696 Quartz/Sapphire – 1.27”/1.25” - Backup - 8-212 – PEEK Split 10011200 Quartz – 1.27” - C-Ring - Inconel 718 NACE (Thk-.010") Nickel Plated 10010522 Quartz - 0.75” - O-Ring - 2-015 - Aflas - 7182B - 90D 10010327 Quartz – 0.75” - O-Ring - 0.75" Quartz - 2-014 - Chemraz – 526 - 95D 10010500 Quartz – 0.75” - Backup - 8-014 - PEEK

Bulk ElastomersID Description

10018321 Quartz/Sapphire – 1.27”/1.25” - O-Ring - 2-212 - Aflas - 7182B - 90D - Bulk Supply (Qty of 50 per)

10018322 Quartz/Sapphire – 1.27”/1.25” - O-Ring - 2-212 – Chemraz – 510 - 90D - Bulk Supply (Qty of 10 per)

10018323 Quartz/Sapphire – 1.27”/1.25” - O-Ring - Backup - 8-212 – PEEK Split - Bulk Supply (Qty of 50 per)

10018329 Quartz – 1.27” - C-Ring - Inconel 718 NACE (Thk-.010") Nickel Plated (Qty 10 per) 10018330 Quartz - 0.75” - O-Ring - 2-015 - Aflas - 7182B - 90D - Bulk Supply (Qty of 50 per) 10018331 Quartz - 0.75” - O-Ring - 2-014 - Chemraz – 526 - 95D - Bulk Supply (Qty of 10 per) 10018332 Quartz - 0.75” - Backup - 8-014 - PEEK Split - Bulk Supply (Qty of 50 per)

Elastomer Hand ToolsID Description

10010354 O-Ring Removal Tool - Plastic


Quartz Gauge Elastomers

Page 26 of 30


auge

Description

Grease and lubricants are used when dressing the tool for field use on the threads as well as on the elastomer sections of the tool as well as cleaning the tools after they have been run downhole.

Product Listing

ID Description 10001028 Degreaser - ID Red - 650mL (450g) - Spray Can 10016949 Grease - Lubricant Silicone O-Ring Lube (70 ml Brush Top) 10013669 Grease - Thread Lubricant - Fastorq 70+ (16 oz Brush Top) 10004099 Grease – Additional Application Brush


Grease and Lubricants

Page 27 of 30


auge

Description

Cases are used as the shipping container and field transport container for SS5067, SS5063 & SS5200 Quartz Gauges. Besides the gauges, the cases house all of the accessories, consumables and other ancillary items required to run Spartek Quartz Gauges in the field.

Product Listing

ID Description 10004024 Quartz - Case Assembly - SS5063

Dimensions 46 x 38 x 15 cm Approx. Weight (full) 6.43 Kg






Quartz Gauge Cases

Page 28 of 30


auge

Description

The Spartek SS5067 & SS5200 incorporate a metal to metal seal on all field joints in order to prevent gas migration into the tool during downhole surveys. As a result the use of a torque wrench and crowfoot is required to make this seal properly in the field. Spartek has specified the following torque wrench and crowfoot to achieve the proper seal; this torque wrench must be used on every instance in which a tool is redressed to be run in the field.

Product Listing

ID Description 10011140 Quartz - SS5067 & SS5200 - Torque Wrench - 10 - 150 ft-lbs - 0.50 inch Drive 10006069 Quartz - SS5067 & SS5200 - Torque Wrench - Crowfoot - 1.0625" - 0.50" Drive


Quartz Gauge Hand Tools

Page 29 of 30


auge

Description

The Spartek SS5063, SS5067 & SS5200 Quartz Gauge models all require the same surface software and communication or interface box in order be programmed and then have the data subsequently downloaded after the job. Spartek Systems also provides an operations manual for each Quartz gauge model to ensure the client has a reference for best practices to use when deploying or maintaining the equipment.

Product Listing

ID Description 10010065 Quartz - Operations Manual - SS5067 10010767 Quartz - Operations Manual - SS5063 10009169 Quartz - Operations Manual - SS5200 10006069 Software – SparGauge 10010527 SS1009 – Interface Box - USB


Manuals, Software & Accessories

Page 30 of 30


auge


Description Lithium battery packs used with the Spartek Systems line of Sub Surface Quartz Pressure Gauges. The SS5067 and SS5200 gauges utilize a “C” cell style pack in various configurations depending on the duration and operating downhole temperature of the job while the SS5063 utilizes an “AA” cell style pack in various configurations to achieve the same result depending on duration and downhole operating temperature. The 200°C battery also requires that they are conditioned prior to running in hole; Spartek has a Depassivation Box that enables the client to condition the batteries on location.

Product Listing

165°C - “C” Cell configuration ID Description

10009292 Quartz - Battery Pack - "C" - 2 cell - 165° C - Locking - 7 Pin - 7.8V -6.2Ah 10007724 Quartz - Battery Pack - "C" - 3 cell - 165° C - Locking - 7 Pin - 11.2V - 6.2Ah 10006881 Quartz - Battery Pack - "C" - 4 cell - 165° C - Locking - 7 Pin - 7.8V - 12.4Ah 10015592 Quartz - Battery Pack - "C" - 6 cell - 165° C - Locking - 7 Pin - 7.8V - 15.0Ah

200°C - “C” Cell configuration ID Description

10008533 Quartz - Battery Pack - "C" - 2 cell - 200° C - Locking - 7 Pin - 7.2V - 4.0Ah 10005655 Quartz - Battery Pack - "C" - 3 cell - 200° C - Locking - 7 Pin - 10.8V - 4.5Ah 10012766 Quartz - Battery Pack - "C" - 4 Cell - 200° C - Locking - 7 Pin - 14.4V - 4.5 Ah 10007773 Quartz - Battery Pack - "C" - 4 cell - 200° C - Locking - 7 Pin - 7.2V - 8.0 Ah 10011245 Quartz - Battery Pack - "C" - 6 cell - 200° C - Locking - 7 Pin - 10.8V - 8.0Ah

150°C - “AA” Cell configuration ID Description

10002068 Quartz /Sapphire - Battery Pack - "AA" - 2 cell - 150° C - Non-Locking - 7 Pin - 7.8V - 1.6Ah 10002535 Quartz /Sapphire - Battery Pack - "AA" - 3 cell - 150° C - Non-Locking - 7 Pin - 10V - 1.4Ah 10002523 Quartz /Sapphire - Battery Pack - "AA" - 4 cell - 150° C - Non-Locking - 7 Pin - 7.8V - 2.8Ah

200°C - “AA” Cell configuration 10004163 Quartz /Sapphire - Battery Pack - "AA" - 2 cell - 200° C - Non-Locking - 7 Pin - 7.2V - 1.0Ah 10003276 Quartz /Sapphire - Battery Pack - "AA" - 3 cell - 200° C - Non-Locking - 7 Pin - 10.8V - 1.0Ah 10004257 Quartz /Sapphire - Battery Pack - "AA" - 4 cell - 200° C - Non-Locking - 7 Pin - 7.2V - 2.0Ah

200°C Battery Depassivation Box10009339 Quartz - SS1008 - Depassivation Box (used to condition 200° C Batteries)


Battery Packs

*Note image is a 3 “AA” Cell configuration*

46012239 Quartz Product Catalog

Documents

product listing

ss5067 quartz pressure

4ss5063 quartz pressure

5ss5200 quartz pressure

sylvan lake

thevenaz industrial

ab t4s 2j6