MEKRA LANG NORTH AMERICA Service and Troubleshooting Guide 424 Mirror System Congratulations, your vehicle is equipped with the most advanced mirror system available. Please take a few minutes to review this manual and familiarize yourself with the features of your new mirrors.
18
Embed
424 Mirror Manual - Lang Mekra North America, LLC · 2017. 6. 7. · MEKRA LANG NORTH AMERICA Service and Troubleshooting Guide 424 Mirror System Congratulations, your vehicle is
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MEKRA LANG NORTH AMERICA
Service and Troubleshooting Guide
424
Mirror
System
Congratulations, your vehicle is equipped with the most advanced mirror system available. Please take a few minutes to review this manual and familiarize yourself with the features of your new mirrors.
For the latest version of this manual, visit http://mekralang.us/ V2.0
Chrome Accessories You can customize your 424 Mirror System with chrome. Chrome back covers, bezels, arm covers and mounting base covers give your mirror premium appearance. For additional details, contact MEKRA Lang or visit us at http://mekralang.us/.
S E C T I O N 3
Cleaning Your Mirror
You should clean your mirror system using methods and chemicals that you use to clean the exterior of your vehicle. Harsh chemicals may damage the finish of the mirror arm, mirror head, or glass surface.
To clean the mirror assembly, use mild soap and water such as car wash soap, or a glass cleaner such as Windex, and a soft cloth. These cleaners can be used on all parts of the mirror assembly including the mirror glass, mirror arm and chrome components.
Do not use harsh chemicals to clean any part of the mirror assembly, as they may damage the finish.
Warning! Be careful not to scratch the glass! The reflective surface of the mirror glass is durable, but can be scratched by harsh or abrasive cleaners. It can also be scratched by razor blades or other tools.
DAMAGE CAUSED BY THE USE OF HARSH OR ABRASIVE CHEMICALS, AS WELL AS SHARP OBJECTS ON THE
EXTERIOR COMPONENTS OF YOUR MIRROR WILL NOT BE COVERED UNDER WARRANTY.
Mirror Glass Replacement No tools are required to remove the mirror glass.
The main mirror and wide-angle mirror have a patented locking mechanism that makes glass replacement quick and easy. Warning: You should wear leather gloves or other heavy gloves to prevent being cut by broken glass!
To remove the mirror glass unit (same process to remove the Main mirror or Wide Angle, as shown):
1. Rotate the glass unit in the direction shown in Step 1 so that the right side of the glass unit sticks out of the mirror housing.
2. Slide the glass unit to the right as shown in Step 2. Applying pressure to the front of the glass with the palm of your hand may help. CAUTION: Make sure you wear gloves! The mirror unit will slide approximately ½ inch to the right. The glass unit can be removed by sliding it only in the direction shown and will not disengage in any other direction.
3. Pull glass unit out of the mirror head by pulling it perpendicular to the face of the glass in the direction shown in Step 3.
4. Unplug heater terminals (if equipped). Unplug turn signal terminals, if the wide angle mirror is equipped.
Back Cover Replacement First, remove the glass units from the mirror head, as shown in the mirror glass removal section.
To remove the back cover, use a screwdriver or other tool to disengage the six clips that secure the back cover. Insert the tip of the screwdriver as shown below and then disengage the clip by moving the screwdriver in the direction indicated by the arrow. It may be necessary to pull the back cover away from the bezel as the clips are disengaged so that the back cover does not snap back into place. Note that the motor pack has been omitted from the image below.
To re-install the back cover, snap the back cover onto the bezel. The clips should automatically lock. To ensure a secure fit, apply pressure to each clip through the holes in the bezel in the direction indicated by the arrow. See clip installation below
Insert clip into bezel as shown below. Make sure that black clip lip is on inside of chrome bezel lip
After all 6 clips have been installed correctly as per above instruction, push back cover onto bezel until all 6 clips have clipped into place as shown below.
Motor Pack Replacement To replace the motor pack or the manual mirror adjustment pack:
1. Remove the mirror glass units as shown in the Mirror Glass Replacement Section.
2. Remove the back cover as shown in the Back Cover Replacement section.
3. Mark the orientation of the flat side of the motor pack by noting the position of the flat edge of the pack. If the motor pack is not replaced in the proper orientation, the remote control feature will not work properly.
4. For each motor pack or adjustment pack, there are four screws that fasten it to the metal structure plate. The screws heads are accessed from the back side of the structure plate. Remove the screws using a T25 Torx bit.
Screws that fasten the main mirror motor/manual adjustment pack to the structure plate
Screws that fasten the wide angle adjustment pack to the structure plate
Camera Replacement If the camera is not working properly, contact MEKRA Lang for technical support. If you need to replace the camera:
1. Remove the mirror glass units as shown in Mirror Glass Replacement Section.
2. To remove the camera use a screwdriver or other tool to disengage the 3 clips that secure the camera. Insert the tip of the screwdriver, then disengage the clip by pressing the tool and pull the camera cover.
3. Remove the camera harness pushing the small locker on the connector
and pull the wire harness. Warning! Be careful to don’t damage the connector locker.
4. To re-install the camera make sure you connect the wire harness first. Position the camera and apply hand pressure to each clip.
Replacement parts are available for the 424 Mirror System. Various finishes, colors and configurations are available. Contact your dealer or MEKRA Lang for the current replacement parts options and availability.
MEKRA Lang North America, LLC. Rear View Mirror Warranty Policy
Effective May 1, 2014 replaces all Warranties dated before January 1, 2014
Limited Warranty
MEKRA Lang North America, LLC. Will repair or replace, free of charge, any part(s) of the mirror system that is defective in material and workmanship or both.
Transportation charges on product submitted for repair or replacement under this warranty must be borne by the person requesting warranty coverage. This
warranty is effective for the time periods and subject to the conditions stated below. This warranty does not cover any damages due to accident, misuse, abuse, or
negligence.
For warranty service information go to http://mekralang.us/ or by calling 1-803-337-5264.
THERE IS NO OTHER EXPRESSED WARRANTY, IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE TERMS STATED BELOW, OR TO THE EXTENT PERMITTED BY LAW. ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. LIBILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARE EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW.
Warranty Terms
Brand/ Model Consumer Term Commercial Term Comments
Model 424 1 years 1 year Non-transferable
The warranty term begins on the date of purchase by the first consumer or commercial customer, and continues for the period of time stated in the above table.
“Consumer term” means personal use by a retail consumer. “Commercial Term” means all other uses, including use for commercial use.