1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected]ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD CS461.6 • 40’ x 8’ 6” Dry Freight ISO Cargo Container 40’ x 8’ 6” Dry Freight ISO Cargo Container LENGTH HEIGHT WIDTH DOOR OPENING Exterior Interior Exterior Interior Exterior Interior Height Width Ft in 40’ 0” 39’ 5 3/4” 8’ 6” 7’ 10 1/16” 8’ 0” 7’ 8 1/2” 7’ 5 25/32” 7’ 8 1/16” Metric 12,192 12,033 2,591 2,289 2,438 2,350 2,280 2,338 TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY Lbs 8,060 59,140 67,200 2,386 Cu. Ft. Kgs 3,655 26,825 30,480 67.6 Cu.M. PRODUCT FEATURES NSN #: 8150-01-463-8555 STANDARD FEATURES • Corrugated steel sides and roof • 14 gauge locking steel double end swing doors • 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs. per 44 square inches • Wall tie down steel lashing rings, 6,000 lbs. cap. Each • Front corner post tie downs • Door corner post tie downs = restraint system, shoring slot will support 2” x 6” lumber • Vents, (2) each OPTIONAL FEATURES • Manifest Box, (2) each • Adjustable shelving brackets, (12) sets • Decking and shoring beams, (36) each
189
Embed
40’ x 8’ 6” Dry Freight ISO Cargo Container ISO Cargo Container...CS461.9 • 40’ x 9’ 6” Dry Freight ISO Cargo Container PRODUCT FEATURES 1 Sea Box Drie East Rierton N
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
40’ X 8’6” Dry Freight ISO
Cargo C
ontainerD
ouble Doors on B
oth Ends
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on
both ends• 1 1/8” thick marine plywood floors, forklift tested
to16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Front corner post tie downs• Door corner post tie downs = restraint system, shoring
slotwill support 2” x 6” lumber• Vents, (2) each
OPTIONAL FEATURES• Manifest Box, (2) each• Adjustable shelving brackets, (12) sets• Decking and shoring beams, (36) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
40’ x 9’ 6” Dry Freight ISO
Cargo C
ontainerD
ouble Doors on B
oth Ends
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on
both ends• 1 1/8” thick marine plywood floors, forklift tested
to16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Front corner post tie downs• Door corner post tie downs = restraint system, shoring
slotwill support 2” x 6” lumber• Vents, (2) each
OPTIONAL FEATURES• Manifest Box, (2) each• Adjustable shelving brackets, (12) sets• Decking and shoring beams, (36) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors Both Sides (Type 2)
Quadcon D
ry Freight ISO C
argo Container
PRODUCT FEATURESSTANDARD FEATURES
• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way forklift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total
• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage brackets, (5) sets = (10) vertical E-Track section total
• Manifest box, (2) each• Military 595B 34094 CARC GREEN or 33446 CARC TAN exterior paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors Both Sides (Type 2)
Quadcon D
ry Freight ISO C
argo Container
PRODUCT FEATURESSTANDARD FEATURES
• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way forklift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total
• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage brackets, (5) sets = (10) vertical E-Track section total
• Manifest box, (2) each• Military 595B 33446 CARC TAN exterior paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) O
ne Half R
ackISO
Cargo C
ontainer
CS
812.HR
.SG
.DLA
•
Quadcon (TYPE 2) One Half RackISO Cargo Container
PRODUCT FEATURES
STANDARD FEATURES• One half rack• Corrugated steel sides, roof + swing doors on (2)
sides• Heavy duty steel floor• (4) way fork lift pockets• Tie down steel lashing rings, 4,000 lbs. cap. each• Restrain system, shorting slot design to support
2”x 6” lumber
• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket (1) each• Exterior paint Standard Green
OPTIONAL FEATURES• Manifest box (2) each
NSN # 8145-01-504-6917
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
couplers each• Vents, (2) each: one per door panel
• GREEN 34094 Exterior/Interior paint• (4) full size shelving system provides (8) each,
transverse shelf halves, with non-slip polyuria surfacecoating with (32) shelf brackets (of which 8 are floorwelded), recessed tie down bars per shelf half, (8)each. Each full size shelving system is rated at 550lbs. capacity. Shoring and Decking beams, (4) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors Both Sides (Type 2)
Quadcon D
ry Freight ISO C
argo Container
STANDARD FEATURES• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage brackets, (5) sets = (10) vertical E-Track section total• Manifest box, (2) each• Military 595B 34094 STANDARD GREEN or 33446 STANDARD TAN exterior paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon D
ry Freight ISO C
argo Container
CS
812.SG
.6TS
H
•
Quadcon Dry Freight ISO Cargo Container
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both
sides• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap.
tested at 3,000 lbs. each (16 total)• Adjustable shelving brackets (3) sets: (6) vertical
E-track sections (3 per side) (3) Full size shelvingsystem provides (6) each transverse shelf halves, withnon-slip polyurea surface coating (light grey color) (8)each recessed tie down bars per shelf half Each fullsize shelving system is rated at 2,000 lbs. capacity
• (11) each Shoring and Deck beams• (48) each Nylon Web Straps with ratchets
48” L x 1 ½” W x 3/16” D• (4) each Caster Wheels, (2) swivel & (2) fixed
10” diameter wheel, 1/2” thick rubber tire3,000 lbs. working load each, 12,000 lbs. capacity total All equipped with brakes and twist locks
• (2) each Caster Wheel storage brackets• (4) each Container Coupler (Horizontal Twistlocks)• (2) each Container Coupler Storage Bracket• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533
interior paint• Quadcon containers are manufactured to ISO
standards for 9 high stacking• Dry freight container, all Corten Steel Monocoque
construction• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL FEATURES• Additional Transverse Shelf Halves• Additional Shoring and Decking beams• Additional Nylon Web Straps with ratchets
PRODUCT FEATURES
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
FEATURES• Standard Quadcon (Part #: CS812) with swing doors on
two sides• Patented adaptor plate system on one side which
provides a method to mount any Quadcon Size Storage Module
• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready for quick, product-safe deployment
FEATURES• Standard Quadcon (Part #: CS812) with swing doors on
two sides• Patented adaptor plate system on one side which
provides a method to mount any Quadcon Size Storage Module
• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready for quick, product-safe deployment
FEATURES• Standard Quadcon with (1) double swing doors on one side
and (1) Roll Door on one side• Patented adaptor plate system on both sides which
provides a method to mount any Quadcon Size Storage Module
• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready for quick, product-safe deployment
• Roll Door opening size: 1.363mm Wide x 1,748 mm High• Standard Green
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CO
MM
ON
10 Quadcon D
ry Freight ISO
Cargo C
ontainer
CS
812.SG
.CO
M10
•
COMMON 10 Quadcon Dry Freight ISO Cargo Container
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. capacity
(20 total)• Adjustable shelving A-track (4) sets:
(10) vertical A-track sections (5 per side)• (2) each Caster Wheel storage brackets,
holds (2) casters each• (2) each Container Coupler Storage Bracket, hold (2)
couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533
interior paint• Quadcon containers are manufactured to ISO standards
for 9 high stacking• Dry freight container, all Corten Steel Monocoque
construction• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL FEATURES• (4) Full size shelving system provides• (8) each transverse shelf halves, with non-slip
polyurea surface coating with 32 shelf brackets (ofwhich 8 are floor welded)
• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs.
capacity• (4) each Shoring and Deck beams• (64) each Web Straps with ratchets
48” L x 1” W, 700 lbs. SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity
total• All equipped with brakes and twist locks• (4) each Container Coupler (Horizontal Twistlocks)• Additional Transverse Shelf Halves with 1 set of 4
shelf brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets• Tow Bar
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CO
MM
ON
12 Quadcon D
ry Freight ISO
Cargo C
ontainer
CS
812.SG
.CO
M12
•
COMMON 12 Quadcon Dry Freight ISO Cargo Container
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Back-to-Back heavy duty steel Cabinets with 6 Drawers
each• Wall tie down steel lashing rings, 2,000 lbs. capacity
(20 total)• Adjustable shelving A-track (4) sets:
(10) vertical A-track sections (5 per side)• (2) each Caster Wheel storage brackets,
holds (2) casters each• (2) each Container Coupler Storage Bracket, hold (2)
couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533
interior paint• Quadcon containers are manufactured to ISO standards
for 9 high stacking• Dry freight container, all Corten Steel Monocoque
construction
• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL FEATURES• (2) Full size shelving system provides• (4) each transverse shelf halves, with non-slip
polyurea surface coating with 16 shelf brackets• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs.
capacity• (2) each Shoring and Deck beams• (32) each Web Straps with ratchets
48” L x 1” W, 700 lbs. SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity
total• All equipped with brakes and twist locks• (4) each Container Coupler (Horizontal Twistlocks)• Additional Transverse Shelf Halves with 1 set of 4
shelf brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets• Tow Bar
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon D
ry Freight ISO C
argo Container
with 2 C
abinets Containing 6 D
rawers each
CS
812.SG
.CT
2-6D.D
LA
•
Quadcon Dry Freight ISO Cargo Containerwith 2 Cabinets Containing 6 Drawers each
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
PLAN VIEW
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• Heavy duty steel floor• Four-way fork lift pockets • (10) Columns of VerticalE-Track • (20) Tie Down rings - (10) bottom row and (10) top row • (2) CS2345 Aluminum Manifest Holders
• Data Plate with NSN & UID Label •(3) CS2341: Horizontal Twistlocks with
(1) CS2342: Storage Bracket• Standard GreenCUSTOM FEATURES• (2) Stanley Vidmar 55”W x 33”H x 28”D (6) Drawer
Cabinet and divided partitions• Heavy Duty Cabinets with Lifetime Guarantee• Drawers feature Lock Bar and Locking Mechanism to
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CO
MM
ON
10 Quadcon D
ry Freight ISO
Cargo C
ontainer
CS
812.SG
.US
MC
.CO
M10
•
COMMON 10 Quadcon Dry Freight ISO Cargo Container
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. capacity
(20 total)• Adjustable shelving A-track (4) sets:• (10) vertical A-track sections (5 per side)• (4) Full size shelving system provides (8) each transverse
shelf halves, with non-slip polyurea surface coating with 32shelf brackets (of which 8 are floor welded)
• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs. capacity• (4) each Shoring and Deck beams• (64) each Web Straps with ratchets 48” L x 1” W, 700 lbs.
SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity total• All equipped with brakes and twist locks• (2) each Caster Wheel storage brackets, holds (2) casters
each• (4) each Container Coupler (Horizontal Twistlocks)• (2) each Container Coupler Storage Bracket, hold (2)
couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533 interior
paint• Quadcon containers are manufactured to ISO standards for
9 high stacking• Dry freight container, all Corten Steel Monocoque
construction• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL FEATURES• Additional Transverse Shelf Halves with 1 set of 4 shelf
brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CO
MM
ON
12 Quadcon D
ry Freight ISO
Cargo C
ontainer
CS
812.SG
.US
MC
.CO
M12
•
COMMON 12 Quadcon Dry Freight ISO Cargo Container
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Back-to-Back heavy duty steel Cabinets with 6 Drawers each• Wall tie down steel lashing rings, 2,000 lbs. capacity
(20 total)• Adjustable shelving A-track (4) sets:• (10) vertical A-track sections (5 per side)• (2) Full size shelving system provides (4) each transverse
shelf halves, with non-slip polyurea surface coating with 16shelf brackets
• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs. capacity• (2) each Shoring and Deck beams• (32) each Web Straps with ratchets 48” L x 1” W, 700 lbs.
SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity total• All equipped with brakes and twist locks• (2) each Caster Wheel storage brackets,
holds (2) casters each• (4) each Container Coupler (Horizontal Twistlocks)• (2) each Container Coupler Storage Bracket, hold (2)
couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533 interior
paint• Quadcon containers are manufactured to ISO standards for
9 high stacking• Dry freight container, all Corten Steel Monocoque
construction• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL FEATURES• Additional Transverse Shelf Halves with 1 set of 4 shelf
brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets• Tow Bar
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) ISO
Container
with 2 A
djustable Shelves
CS
812.SH
2
•
Quadcon (TYPE 2) ISO Container with 2 Adjustable Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) ISO
Container
with 4 A
djustable Shelves
CS
812.SH
2+2
•
Quadcon (TYPE 2) ISO Container with 4 Adjustable Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (Type 2) ISO
Container
with 3 A
djustable Shelves
CS
812.SH
3
•
Quadcon (Type 2) ISO Container with 3 Adjustable Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) ISO
Container w
ith 3 A
djustable Shelves and 1 Spare Shelf
CS
812.SH
3+1
•
Quadcon (TYPE 2) ISO Container with 3 Adjustable Shelves and 1 Spare Shelf
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
both sides• Heavy duty steel floor• (4) way fork lift pockets• (4) Heavy duty shelves, (1) spare• (3) Tie down bars, (1) spare• (16) Tie down straps, (4) spare• 64 Sq. Ft. shelf space
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (Type 2) ISO
Container
with 6 A
djustable Shelves
CS
812.SH
3+3
•
Quadcon (Type 2) ISO Containerwith 6 Adjustable Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
both sides• Heavy duty steel floor• (4) way fork lift pockets• (6) Heavy duty shelves• (4) Tie down bars• (32) Tie down straps• 127 Sq. Ft. shelf space
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) ISO
Container w
ith 6 A
djustable Shelves and 2 Spare Shelves
CS
812.SH
3+3+2
•
Quadcon (TYPE 2) ISO Container with 6 Adjustable Shelves and 2 Spare Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
both sides• Heavy duty steel floor• (4) way fork lift pockets• (6) Heavy duty shelves, (2) spare• (3) Tie down bars, (1) spare• (32) Tie down straps, (8) spare• 127 Sq. Ft. Shelf space
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) ISO
Container
with 4 A
djustable Shelves
CS
812.SH
4
•
Quadcon (TYPE 2) ISO Container with 4 Adjustable Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Quadcon (TYPE 2) ISO
Container
with 8 A
djustable Shelves
CS
812.SH
4+4
•
Quadcon (TYPE 2) ISO Container with 8 Adjustable Shelves
(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module
both sides• Heavy duty steel floor• (4) way fork lift pockets• (8) Heavy duty shelves• (5) Tie down bars• (48) Tie down straps• 157 Sq. Ft. Shelf space
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
812.ST
.AP
Q1.D
LA
•
Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)
Quadcon w
ith Adaptor Plate O
ne Side
Quadcon with Adaptor Plate One Side
FEATURES• Standard Quadcon with swing doors on
two sides• Patented adaptor plate system on one side which
provides a method to mount any Quadcon Size Storage Module
• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready for quick, product-safe deployment
FEATURES• Standard Quadcon with swing doors on two sides
• Patented adaptor plate system on one side whichprovides a method to mount any Quadcon Size StorageModule
• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shotbolt mechanism is engaged correctly into the RemovableModule
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct positionfor transportation, eliminating the need for blocking andbracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready forquick, product-safe deployment
FEATURES• Standard Quadcon with (1) double swing doors on one side
and (1) Roll Door on one side• Patented adaptor plate system on one side which
provides a method to mount any Quadcon Size Storage Module
• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready for quick, product-safe deployment
• Roll Door opening size: 1.363mm Wide x 1,748 mm High• Standard Tan
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors Both Sides (Type 2)
Quadcon D
ry Freight ISO C
argo Container
STANDARD FEATURES• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket• Military 595B 33446 STANDARD TAN exterior paint
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One Side (Type 1)
Tricon Dry Freight ISO
Cargo C
ontainer
PRODUCT FEATURES
STANDARD FEATURES• Swing doors on one side (Type 1)• Corrugated steel sides & roof• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.
Each (20) total• Front corner post tie downs, (10) total• Door corner post tie downs, (10) total = restraint
system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets: (5) sets = (10)
Vertical E-Track sections total, weld on 4” centerfor 1,000 lbs. cap. Pull test for tie down fittings
• Manifest Box, (2) each• Technical Manual• UID Lablels• Performance purchase description # ATPD2298A• The Natick Notch is 8 bottom rail locations• Military Standard 595B 34094 CARC GREEN
OPTIONAL FEATURES• Decking & Shoring beams• Metal Transverse shelves• Closeable Vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each• Connecting Couplers, (3) per Tricon• Connecting Coupler Storage Bracket, (1) each
CS
821.0.CG
•
Double Doors One Side (Type 1)Tricon Dry Freight ISO Cargo Container
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One Side (Type 1)
Tricon Dry Freight ISO
Cargo C
ontainer
PRODUCT FEATURES
STANDARD FEATURES• Swing doors on one side (Type 1)• Corrugated steel sides & roof• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.
Each (20) total• Front corner post tie downs, (10) total• Door corner post tie downs, (10) total = restraint
system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets: (5) sets = (10) Ver-
tical E-Track sections total, weld on 4” center for1,000 lbs. cap. Pull test for tie down fittings
• Manifest Box, (2) each• Technical Manual• UID Lablels• Performance purchase description # ATPD2298A• The Natick Notch is 8 bottom rail locations• Military Standard 595B 34094 CARC TAN
OPTIONAL FEATURES• Decking & Shoring beams• Metal Transverse shelves• Closeable Vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each• Connecting Couplers, (3) per Tricon• Connecting Coupler Storage Bracket, (1) each
CS
821.0.CT
•
Double Doors One Side (Type 1)Tricon Dry Freight ISO Cargo Container
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or
Standard Tan
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 12 Drawers Total• 2 each 22.5” Wide Base Cabinet with
12 Drawers Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction
STANDARD FEATURES
Double D
oors One Side (TYPE 1)
Tricon Dry Freight ISO
Cargo C
ontainer
CS
821.0.CT
86D
•
Double Doors One Side (TYPE 1)Tricon Dry Freight ISO Cargo Container
on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or
Standard Tan
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 16 Drawers Total• 2 each 22.5” Wide Base Cabinet with 16
Drawers Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction
STANDARD FEATURES
Double D
oors One Side (TYPE 1)
Tricon Dry Freight ISO
Cargo C
ontainer
CS
821.0.CT
88D
•
Double Doors One Side (TYPE 1)Tricon Dry Freight ISO Cargo Container
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One Side (TYPE 1)
Tricon Dry Freight ISO
Cargo C
ontainer
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each, closeable type• Manifest box, (2) each with 1 set of Manuals• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• (12) Stanley Vidmar storage Cabinets• Electric entry port• Exterior color OD Green # 34096• Interior color Sand # 33303
CS
821.0.D2A
-D2B
.NFE
LC
•
Double Doors One Side (TYPE 1)Tricon Dry Freight ISO Cargo Container
PRODUCT FEATURES
NSN #: 8145--01-289-0945
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
PRODUCT FEATURES
STANDARD FEATURES• Corrugated steel sides, roof and swing doors on
one side• Heavy duty steel floor• Four- way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.
Each (28) total• Front corner post tie downs, (10) total• Door corner post tie downs, (10) total = restraint
system shoring slot will support 2” x 6” lumber• Adjustable shelving brackets: (5) sets = (10)
Vertical E-Track sections total• Vents, (2) each• Exterior color OD Green # 34088 or Tan # 33446• Interior color OD Green # 34088 or Tan # 33446
OPTIONAL FEATURES• Decking and Shoring Beams, (15) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Manifest Box, (2) each with 1 set of Manuals
Double Doors One Side (Type 1)Tricon Dry Freight ISO Cargo Container
Double D
oors One Side (Type 1)
Tricon Dry Freight ISO
Cargo C
ontainer
CS
821.0
•
(3) TRICON CONTAINERS COUPLED TOGETHER TO FORM (1) 20’ ISO MODULE
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One Side (TYPE 1)
Tricon Dry Freight ISO
Cargo C
ontainer
PRODUCT FEATURES
STANDARD FEATURES• Swing doors on one side (Type 1)• Corrugated steel sides & roof• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.
Each (20) total• Front corner post tie downs, (10) total• Door corner post tie downs, (10) total = restraint
system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets: (5) sets = (10) Ver-
tical E-Track sections total, weld on 4” center for1,000 lbs. cap. Pull test for tie down fittings
• Manifest Box, (2) each• Technical Manual• UID Lablels• Performance purchase description # ATPD2298A• Military Standard 595B 34094 STANDARD
GREEN or 33446 STANDARD TAN exterior paint
OPTIONAL FEATURES• Decking & Shoring beams• Metal Transverse shelves• Closeable Vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each• Connecting Couplers, (3) per Tricon• Connecting Coupler Storage Bracket, (1) each
CS
821.0.S
•
Double Doors One Side (TYPE 1)Tricon Dry Freight ISO Cargo Container
NSN #: 8150-01-528-7544
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Tricon (TYPE I) Dry Freight ISO
Cargo C
ontainer with 2 A
djustable Transverse M
etal Shelves and 4 Shoring and Decking B
eams
STANDARD FEATURES• 2 Adjustable Transverse Metal Shelf halves• 4 Shoring and Decking Beams - 2,000 lbs cap. each• Adjustable shelving brackets (5) sets, = (10) vertical
E-track sections total• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each
(24 total)• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint
system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint Standard Green
OPTIONAL FEATURES• Manifest box (2) each• Rack and Cabinet Systems available• Other paint types and colors available
CS
821.0.SG
.SH
2
•
Tricon (TYPE I) Dry Freight ISO Cargo Container with 2 Adjustable Transverse Metal Shelves and
4 Shoring and Decking Beams
PRODUCT FEATURES
(3) Tricon Containers coupled togetherto form (1) 20’ ISO module
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Tricon (TYPE I) Dry Freight ISO
Cargo C
ontainer with 4 A
djustable Transverse M
etal Shelves and 8 Shoring and Decking B
eams
STANDARD FEATURES• 4 Adjustable Transverse Metal Shelf halves• 8 Shoring and Decking Beams - 2,000 lbs cap. each• Adjustable shelving brackets (5) sets, = (10) vertical
E-track sections total• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each
(24 total)• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint
system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint STANDARD TAN
OPTIONAL FEATURES• Manifest box (2) each• Rack and Cabinet Systems available• Other paint types and colors available
CS
821.0.ST.4T
SH
•
Tricon (TYPE I) Dry Freight ISO Cargo Container with 4 Adjustable Transverse Metal Shelves and
8 Shoring and Decking Beams
PRODUCT FEATURES
(3) Tricon Containers coupled togetherto form (1) 20’ ISO module
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Tricon (TYPE I) Dry Freight ISO
Cargo C
ontainer with 2 A
djustable Transverse M
etal Shelves and 4 Shoring and Decking B
eams
STANDARD FEATURES• 2 Adjustable Transverse Metal Shelf halves• 4 Shoring and Decking Beams - 2,000 lbs cap. each• Adjustable shelving brackets (5) sets, = (10) vertical
E-track sections total• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each
(24 total)• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint
system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint Standard Tan
OPTIONAL FEATURES• Manifest box (2) each• Rack and Cabinet Systems available• Other paint types and colors available
CS
821.0.ST.S
H2
•
Tricon (TYPE I) Dry Freight ISO Cargo Container with 2 Adjustable Transverse Metal Shelves and
4 Shoring and Decking Beams
PRODUCT FEATURES
(3) Tricon Containers coupled togetherto form (1) 20’ ISO module
NSN # 8145-01-504-6892
CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
OPTIONAL FEATURES• Decking and shoring beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Metal transverse shelves• Storage cabinets• Closeable vents• Decompression vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each
OPTIONAL FEATURES• Decking and shoring beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Metal transverse shelves• Storage cabinets• Closeable vents• Decompression vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
ITEM QTY MODEL WIDTH DEPTH HEIGHT
1 1 DW0245 60” 22.75” 42”
2 1 SV0245 22.5” 27.75” 42”
3 1 DW0245 60” 27.75” 42”
4 1 SV0245 22.5” 27.75” 42”
Double D
oors Both Sides (TYPE 2)
Tricon Dry Freight ISO
Cargo C
ontainer
CS
822.0.CT
2-4D
•
Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container
PLAN VIEW, ROOF REMOVED
STANDARD FEATURES• Vents, (2) each• Manifest box (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Tan exterior paint
CONTAINER• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 1 each 60” Wide Base Cabinet with 4 Drawers• 1 each 22.5” Wide Base Cabinet with 4 Drawers• 1 each 60” Wide Top with 1 Swing Door and 2 shelves• 1 each 22.5” Wide Top with 2 Swing Doors and
2 shelves• 400lb. Capacity Drawers• Custom configurations upon request
Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container
PLAN VIEW, ROOF REMOVED
CONTAINER• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color OD Green
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 2 each 45” Wide Base Cabinet with 4 Roll Out Shelves• 2 each 22.5” Wide Base Cabinet with 4 Roll Out
Shelves• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 45” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• Superior Quality and Construction• Custom configurations upon request
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
ITEM QTY MODEL Width DEPTH HEIGHT
1 2 XW0340 45.00” 27.75” 57.00”
2 2 SV0340 22.50” 27.75” 57.00”
3 2 XW0135 45.00” 27.75” 25.00”
4 2 SV0135 22.50” 27.75” 25.00”
CS
822.0.CT
8-4RO
.ST.D
LA
•
PLAN VIEW, ROOF REMOVED
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (2) sides• Heavy duty steel floor• Four-way fork lift pockets (4.5” high on the sides)• (10) Columns of Vertical E-Track• (20) Wall Tie Down Rings - (10) bottom row and
(10) top row• (20) Corner Post Tie Downs - (10) front corners and
(10) door corners = restraint system shoring slot willsupport 2” x 6” lumber
(2) CS5005: Container Vents• Standard TanCUSTOM FEATURES• Heavy Duty Steel Stanley Vidmar Cabinets:
- (2) 45”W Base Cabinets with (8) Roll Out Shelves Total - (2) 22.5”W Base Cabinets with (8) Roll Out Shelves Total - (2) 45”W 2-Swing Doors Top Cabinets - (2) 22.5”W 1-Swing Door Top Cabinets
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Tricon ISO C
ontainer Double D
oors Both Sides (Type 2)
with M
odular Cabinet D
esignTricon ISO Container Double Doors Both Sides (Type 2)
Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container
PLAN VIEW, ROOF REMOVED
CONTAINER• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or Standard Tan
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 1 each 45” Wide Base Cabinet with 4 Roll Out Shelves• 1 each 22.5” Wide Base Cabinet with 4 Roll Out
Shelves• 1 each 22.5” Wide Top with 1 Swing Door• 1 each 45” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• Superior Quality and Construction• Custom configurations upon request
Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container
PLAN VIEW, ROOF REMOVED
CONTAINER• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or Standard Tan
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 1 each 45” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Top with 1 Swing Door• 1 each 45” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction• Custom configurations upon request
Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container
PLAN VIEW, ROOF REMOVED
CONTAINER• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or Standard Tan
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 12 Drawers Total• 2 each 22.5" Wide Base Cabinet with 12 Drawers
Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction
Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container
PLAN VIEW, ROOF REMOVED
CONTAINER• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or Standard Tan
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 16 Drawers Total• 2 each 22.5” Wide Base Cabinet with 16 Drawers
Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and
Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors Both Side (TYPE 2)
Tricon Cargo C
ontainerPRODUCT FEATURES
STANDARD FEATURES• Corrugated steel sides, roof, and swing doors on
one side• Heavy duty steel floor• Four way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.
each (20) total• Door corner post tie downs, (20) total = restraint
system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets, (5) sets: (10)
vertical E-Track section total• Exterior color OD Green # 34096• Interior color Sand # 33303• Item Unique Identification (IUID)
OPTIONAL FEATURES• Decking and shoring beams, (15) each• Vents, (2) each, closeable type• Manifest box, (2) each with 1 set of Manuals• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each
CS
822.0
•
Double Doors Both Side (TYPE 2)Tricon Cargo Container
(3) TRICON CONTAINERS COUPLED TOGETHER TO FORM (1) 20’ ISO MODULE
CS822.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
OPTIONAL FEATURES• Decking and shoring beams• Metal transverse shelves• Storage cabinets• Closeable vents• Decompression vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each
CS
822.0.S
•
Tricon Cargo ContainerDouble Doors Both Sides (Type 2)
NSN #: 8145-01-528-7546
(3) TRICON CONTAINERS COUPLED TOGETHER TO FORM (1) 20’ ISO MODULE
CS822.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on one side which
provides a method to mount any two of Sea Box’sHalf-Width Storage Modules or any one Full-Width StorageModule
• Full array of Drawer and Shelf Modules are available totransport and store small & medium sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shotbolt mechanism is engaged correctly into the RemovableModule
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct positionfor transportation, eliminating the need for blocking andbracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready forquick, product-safe deployment
• Standard Tan
Adaptor Plate shown above Can also be purchased in Half-Width Size
FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on both sides. Each plate
provides a method to mount any two of Sea Box’sHalf-Width Storage Modules or any one Full-Width StorageModule
• Full array of Drawer and Shelf Modules are available totransport and store small & medium sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shotbolt mechanism is engaged correctly into the RemovableModule
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct positionfor transportation, eliminating the need for blocking andbracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready forquick, product-safe deployment
• Standard Tan
Adaptor Plate shown above Can also be purchased in Half-Width Size (CS3453.
CABINETS• Featuring Stanley Vidmar Cabinets designed for
mobile transport, all with LIFETIME Warranty• 1 each 45” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Top with 1 Swing Door• 1 each 45” Wide Top with 2 Swing Doors• 400lb. Capacity Drawers• Custom configurations upon request
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
822.0.ST
.FAP
T1.D
LA
•
Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)
Tricon (Type 2) with Full W
idth Adaptor Plate O
ne Side
Tricon (Type 2) with Adaptor Plate One Side
FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on one side which
provides a method to mount any two of Sea Box’sHalf-Width Storage Modules or any one Full-Width StorageModule
• Full array of Drawer and Shelf Modules are available totransport and store small & medium sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shotbolt mechanism is engaged correctly into the RemovableModule
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct positionfor transportation, eliminating the need for blocking andbracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready forquick, product-safe deployment
• Standard Tan
Adaptor Plate shown above Can also be purchased in Half-Width Size
(CS3453.HAPT.DLA)
CS822.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
822.0.ST
.FAP
T2.D
LA
•
Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)
Tricon (Type 2) with Full-W
idth Adaptor Plate B
oth Sides
Tricon (Type 2) with Full-Width Adaptor Plate Both Sides
FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on both sides. Each plate
provides a method to mount any two of Sea Box’sHalf-Width Storage Modules or any one Full-Width StorageModule
• Full array of Drawer and Shelf Modules are available totransport and store small & medium sized parts
• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift
• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shotbolt mechanism is engaged correctly into the RemovableModule
• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct positionfor transportation, eliminating the need for blocking andbracing
• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready forquick, product-safe deployment
• Standard Tan
CS822.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)
OPTIONAL FEATURES• Decking and shoring beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Metal transverse shelves• Storage cabinets• Closeable vents• Decompression vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each
(3) Tricon Containers can be coupled togetherto form (1) 20’ ISO module
STANDARD FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC
CAPACITY for any Type V Tricon• Full-width cargo doors on both ends,
(swing out a full 270 degrees for ease of loading)• (4) way fork lift pockets• (10) each floor level steel tie down lashing rings• (10) each top side rail, steel, tie down lashing rings, all
lashing rings are 4,000 lbs. cap. each• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (2) Full size shelving system provides• (4) each longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at 2,000 lbs.
cap.• (6) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Customer’s Choice of Standard Exterior Paint Color
OPTIONAL FEATURES• Adjustable Shelving Brackets (4) sets total• Adjustable Shelving Brackets (5) sets total• Door still, recessed tie down steel lashing rings,
4,000 lbs. cap. each (4) total• Document holder (2) each
PRODUCT FEATURES
Tricon (TYPE V) ISO C
argo Container
Double D
oors Both Ends
Tricon (TYPE V) ISO Cargo Container Double Doors Both Ends
(3) Tricon Containers can be coupled togetherto form (1) 20’ ISO module
STANDARD FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC
CAPACITY for any Type V Tricon• Full-width cargo doors on both ends,
(swing out a full 270 degrees for ease of loading)• (4) way fork lift pockets• (10) each floor level steel tie down lashing rings• (10) each top side rail, steel, tie down lashing rings, all
lashing rings are 4,000 lbs. cap. each• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (1) Full size shelving system provides (2) each
longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at 2,000 lbs.
cap.• (3) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Standard White Exterior Paint Color• All new containers are manufactured to the latest ISO
standards fro 9 high stacking• Dry freight container, all corten steel monocoque
construction• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL FEATURES• Adjustable Shelving Brackets (4) sets total• Adjustable Shelving Brackets (5) sets total• Door still, recessed tie down steel lashing rings,
4,000 lbs. cap. each (4) total• Document holder (2) each• Rack & Cabinet systems
PRODUCT FEATURES
Tricon (TYPE V) ISO C
argo Container
Double D
oors Both Ends
Tricon (TYPE V) ISO Cargo Container Double Doors Both Ends
(3) Tricon Containers can be coupled togetherto form (1) 20’ ISO module
STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC CAPACITY
for any Type 5 Tricon
• Full-width access cargo doors on both ends of the container,(swing out a full 270 degrees for ease of loading)
• (4) way fork lift pockets
• (10) each floor level steel tie down lashing rings (10) eachtop side rail, steel, tie down lashing rings, all lashing rings are4,000 lbs. cap. each (20) Total
• (3) each Door sill plus 2 centered on sidewall, recessed floor tie down steel lashing rings,4,000 lbs. cap. each (8) total
• (6) vertical logistic tracks (“A” or “E” series)• (2) Full size shelving system provides• (4) each longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at
2,000 lbs. cap.• (6) each Shoring and Deck beams
• Connecting couplers, (3) per Tricon
• Connecting coupler storage bracket (1) each
• Vents, (2) each
• Lusterless Aircraft Insignia White Color (37875)
• All new containers are manufactured to the latest ISOstandards fro 9 high stacking
• Dry freight container, all corten steel monocoque construction
• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL PRODUCT FEATURES
• Full size shelving systems + 3 shoring and decking beams kit
• Ratchet and Web Strap Assembly (CS3400)
• Articulated Track Fitting with D-Ring (CS3410)
• Document holder (2) each
• Rack & Cabinet systems
Tricon (TYPE 5) ISO C
argo Container
Double D
oors Both Ends
Tricon (TYPE 5) ISO Cargo Container Double Doors Both Ends
(3) Tricon Containers can be coupled togetherto form (1) 20’ ISO module
STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC
CAPACITY for any Type 5 Tricon• Full-width cargo doors on both ends,
(swing out a full 270 degrees for ease of loading)• (4) way fork lift pockets• (10) each floor level steel tie down lashing rings• (10) each top side rail, steel, tie down lashing rings, all
lashing rings are 4,000 lbs. cap. each• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (2) Full size shelving system provides (4) each
longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at
2,000 lbs. cap.• (6) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Standard White Exterior Paint Color• All new containers are manufactured to the latest ISO
standards fro 9 high stacking• Dry freight container, all corten steel monocoque
construction• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL PRODUCT FEATURES• Full size shelving systems + 3 shoring and decking
beams kit• 8 total vertical E-Track sections• 10 total vertical E-Track sections• Door sill, recessed tie down steel lashing rings,
4,000 lbs. cap. each (4) total• Document holder (2) each• Rack & Cabinet systems available
Tricon (TYPE 5) ISO C
argo Container
Double D
oors Both Ends
Tricon (TYPE 5) ISO Cargo Container Double Doors Both Ends
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
2 Side Expandable Latrine Bicon
Six (6) Toilets, Four (4) Urinals and Tw
o (2) Sinks
STANDARD PRODUCT FEATURES• Stainless steel fixtures with low flow to conserve water• (6) toilets with double paper holders and privacy doors, (4) urinals, (2) sinks with
mirrors and shelf• Pole and winch to assist in set-up• Self adjusting steps• Energy efficient LED lighting and GFCI Outlets• 120/208VAC/3-phase/60Hz power with MS90558C32412P or equivalent
connector• Available interface to external water supply and waste water system• Basic container is designed to comply with ISO/TC-104 test requirements• Container walls expand to provide additional internal space. Maximum interior
space of 175 sq. ft. for standalone capability• (4) Corner castings, ISO668 & ISO1161 compliant• (4) way fork pockets
• Designed and constructed to allow handling in accordance to ISO3874• Air transportable• (2) Personnel doors with hold back ties, one per end• Leveling jacks• CFC-Free polyurethane foam insulation. R-7 thermal rating, designed for
maximum energy efficiency to minimize heating and cooling requirements.• Compatible with 16” ducting to be utilized with a Field Deployable Environmental
Control Unit (FDECU) and a 130K BTU heater• Zinc rich epoxy primer, Acrylic high build epoxy top coat - Color per
2 Side Expandable Latrine Bicon Six (6) Toilets, Four (4) Urinals and Two (2) Sinks
Transport a fully set up latrine to just about anywhere. Six (6) toilets, four (4) urinals and two (2) sinks are built in this versatile and durable 2 Side, expandable bicon. The container transports easily via road, rail or sea in its smallest configuration (10ft x 8ft), then expands to triple its size upon arrival at destination. The unit has been ruggedized for field use with stainless steel fixtures and is easy to maintain. Setup and operation is simple, and the container is optimized for power/water consumption and waste disposal efficiency.
FEATURES (Continued)• Spare paper storage rack• Storage bin with document holder
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
2 Side Expandable Shower B
icon Six (6) Show
ers and Six (6) Sinks
STANDARD PRODUCT FEATURES• Stainless steel fixtures with low flow to conserve water• (6) Showers with curtains and mats and (6) sinks with internal water heater• (6) Towel hooks• Pole and winch to assist in set-up• Self adjusting steps• Storage bin with document holder• Energy efficient LED lighting and GFCI Outlets• 120/208VAC/3-phase/60Hz power with MS90558C32412P or equivalent
connector• Available interface to external water supply and waste water system• Basic container is designed to comply with ISO/TC-104 test requirements• Container walls expand to provide additional internal space. Maximum interior
space of 175 sq. ft. for standalone capability or use with an optional stagingshelter
• Designed and constructed to allow handling in accordance to ISO3874• Air transportable• (2) Personnel doors with hold back ties, one per end• CFC-Free polyurethane foam insulation. R-7 thermal rating, designed for
maximum energy efficiency to minimize heating and cooling requirements.• Compatible with 16” ducting to be utilized with a Field Deployable Environmental
Control Unit (FDECU) and a 130K BTU heater• Zinc rich epoxy primer, Acrylic high build epoxy top coat - Color per customer
specification• Includes spare parts
CS
841.0.3S1.9417
2 Side Expandable Shower Bicon Six (6) Showers and Six (6) Sinks
Maximize your personal hygiene space with this versatile and durable 2 Side, expandable bicon. The container transports easily via road, rail or sea in its smallest configuration (10ft x 8ft), then expands to triple its size upon arrival at destination. The unit has been ruggedized for field use with stainless steel fixtures and is easy to maintain. Setup and operation is simple, and the container is optimized for power/water consumption and waste disposal efficiency.
FEATURES (Continued)• (2) 6’ foldable benches + 4 more for optional
changing room• Interface connector for optional changing
STANDARD FEATURES• 10’ x 8’ x 8’ ISO Container• Basic container is designed to comply with
ISO/TC-104 test requirements• Container walls expand to provide additional
internal space• (4) corner castings, ISO668 & ISO1161 compliant• (2) each, standard ISO1496-2 forklift pockets• Designed and constructed to allow handling in
accordance to ISO3874• (2) Personnel door, one per end• CFC-Free polyurethane foam insulation.• Zinc rich epoxy primer, Acrylic high build
epoxy top coat - Color per customer specification
OPTIONAL FEATURES• Latrine/Urinal/Sink Unit• Shower/Sink/Bench Unit
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One End (Type 1)
Bicon D
ry Freight ISO C
argo Container
PRODUCT FEATURES
STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors, forklift tested
to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets• Vents, (2) each• Military Standard 595B 33446 CARC TAN
exterior paint
OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket (1) each• Manifest box (2) each• Adjustable shelving brackets (4) sets• Decking and shoring beams (16) each
10’ Container can be used to store, transport, and provide support services to vairous Mission
Module (independent systems) componentsInterior integration depicted sold separately.
STANDARD FEATURES• Double bi-fold cargo access door on one end• Container openings sealed with a continuous gasket• Insulated interior walls and ceiling (R-8)• (5) UNISTRUT rails on both container walls• (5) Recessed UNISTRUT rails on conainer ceiling and
(5) on floor• Reinforced exterior side walls: 1/16 in, 15 ksi steel• Exterior Color: Haze Gray MIL-PFR-24635, Type II
silicone enamel Fed. Std. 595B, Color Chip No. 26270at 2 mil MDFT
Double Doors One End (TYPE I)10’ X 8’ Aluminum Bicon Dry Freight ISO Cargo Container
(2) Bicon Containers coupled together to form (1) 20’ ISO module
STANDARD FEATURES• Smooth aluminum sides, and roof• Double swing doors on one end• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets, suitable for USMC
fork lifts• Vents, (2) each
OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket (1) each• Manifest box (1) each• Adjustable shelving brackets (4) sets• Decking and shoring beams (16) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One End (Type 1)
Bicon D
ry Freight ISO C
argo Container
PRODUCT FEATURES
STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors, forklift tested
to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets• Vents, (2) each• Military Standard 595B 33446 CARC TAN
exterior paint
OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket (1) each• Manifest box (2) each• Adjustable shelving brackets (4) sets• Decking and shoring beams (16) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
842.0..3LST.FT
DR
•
(2) Bicon Containers can be coupled together to form (1) 20’ ISO module
STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC
CAPACITY for any Bicon TYPE 2
• Full-width cargo access doors on both ends of the container,(swing out a full 270 degrees for ease of loading)
• (4) way fork lift pockets
• (12) each floor level steel tie down lashing rings (12) eachtop side rail, steel, articulated floor tie down lashing rings, alllashing rings are 4,000 lbs. cap. each (24) total
• (2) each Door sill, recessed floor tie down steel lashing rings,2 per door 18” in, 4,000 lbs. cap. each (4) total
• (12) total vertical logistics tracks (“A” or “E” series)• (1) Full size shelving system provides (4) each longitudinal
shelf quarter• Non-Absorbing Composite shelves• Each full size shelving system is rated at 2,000 lbs. cap.• (6) each Shoring and Deck beams
• Connecting couplers, (2) per Bicon
• Connecting coupler storage bracket (1) each
• Vents, (2) each
• BLUE Exterior Paint
• All new containers are manufactured to the latest ISOstandards fro 9 high stacking
• Dry freight container, all corten steel monocoque construction
• Conforming to ISO 668 + 1496 CSC Certified
OPTIONAL PRODUCT FEATURES
• Full size shelving systems + 3 shoring and decking beams kit
• Document holder (2) each
• Rack & Cabinet systems
• Web Strap and Ratchet (CS3400)
• Articulated Track Fittings with “D” Ring (CS3410)
10’ X 8’ Bicon (TYPE 2) ISO
Container
Double D
oors Both Ends
10’ X 8’ Bicon (TYPE 2) ISO Container Double Doors Both Ends
• (1) Full size shelving system provides only (4) each longitudinal quarter shelf Non-Absorbing Composite shelves, 104 7/16” x 93” full size Each shelving system is rated at 2,000 lbs. cap. (6) each Shoring and Shelf Decking beams
• Connecting couplers, (2) per Bicon
• Connecting coupler storage bracket (1) each
• Vents, Passive type, (2) each
• Premium paint, organic Zinc rich, min. 85% Zinc by weight in dry film
• Top coat lusterless Federal Standard Grey Color (36463)
• Dry freight container, all corten steel monocoque construction
• Conforming to ISO 668 + 1496-1 CSC Certified
OPTIONAL PRODUCT FEATURES
• Top coat paint color Green 34094, Tan 33446 or White 37875
• CARC Top coat paint
• (1) Full size shelving system provides only (4) each longitudinal quarter shelf Non-Absorbing Composite shelves, 104 7/16” x 93” full size Each shelving system is rated at 2,000 lbs. cap. (6) each Shoring and Shelf Decking beams
• Articulated Track Fittings with “D” Ring ( 3410)
Double Doors Both Ends (TYPE II)10’ X 8’ Aluminum Bicon Dry Freight ISO Cargo Containerh
(2) Bicon Containers coupled together to form (1) 20’ ISO module
STANDARD FEATURES• Smooth aluminum sides, and roof• Double swing doors on both ends• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets, suitable for USMC
fork lifts• Vents, (2) each
OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket (1) each• Manifest box (1) each• Adjustable shelving brackets (4) sets• Decking and shoring beams (16) each
Double Doors One End (TYPE 1)20’ X 8’ Dry Freight ISO Cargo Container
NSN #: 8145-01-527-2880
STANDARD PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support
2” x 6” lumber• Vents, (2) each• Manifest Box (2) each• Military Standard 595B 33446 Tan exterior CARC paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
861.0.CT
22-4D.3A
-5B
•
20’ X 8’ (TYPE 1) ISO C
ontainer w
ith 22 Cabinets Package
20’ X 8’ (TYPE 1) ISO Container with 22 Cabinets Package
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to
16,000 lbs per 44 square inches• Vents, (2) each• (22) Stanley Vidmar storage cabinets• Electric entry port• Exterior paint in OD Green or Desert Tan
OPTIONAL FEATURES• CARC paint
PRODUCT FEATURES
INTERIOR CURBSIDE ELEVATION VIEW
INTERIOR ROADSIDE ELEVATION VIEW PLAN VIEW, ROOF REMOVED
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
861.0.CT
28-4D.4A
-4B
•
20’ X 8’ (TYPE 1) ISO C
ontainerw
ith 28 Cabinets Package
20’ X 8’ (TYPE 1) ISO Container with 28 Cabinets Package
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to
16,000 lbs per 44 square inches• Vents, (2) each• (28) Stanley Vidmar storage cabinets• Electric entry port• Exterior paint in OD Green or Desert Tan
OPTIONAL FEATURES• CARC paint
PRODUCT FEATURES
INTERIOR CURBSIDE ELEVATION VIEW
INTERIOR ROADSIDE ELEVATION VIEW PLAN VIEW, ROOF REMOVED
20’ Container can be used to store, transport, and provide support services to vairous Mission
Module (independent systems) components.Interior integration depicted sold separately.
STANDARD PRODUCT FEATURES
• Double bi-fold cargo access door on one end• (1) Double personnel side door, 76” high• (1) Service panel door on one end, opposite of cargo
doors• Container openings sealed with a continuous gasket• Insulated interior walls and ceiling (R-8)• (5) UNISTRUT rails on both container walls• (5) Recessed UNISTRUT rails on conainer ceiling and
(5) on floor• Reinforced exterior side walls: 1/16 in, 15 ksi steel• Exterior Color: Haze Gray MIL-PFR-24635, Type II
silicone enamel Fed. Std. 595B, Color Chip No. 26270at 2 mil MDFT
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
861.0.OP
•
20’ (TYPE 1) ISO C
ontainer with O
ffice Package
20’ (TYPE 1) ISO Container with Office Package
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides
• (1) set of unladen forklift pockets
• 30” X 80” personnel door with 16” X 16” window
• (1) Reinforced cutout frame for a window mount A/C unit(coverplate installed for overseas shipping)
• Commercial grade linoleum tile floor • I standard
insulation (1 1/2” foam and 3/8” OSB boardwith white textured plastic lining)
• (1) Frigidaire model FAS155P1A (part # 4PLD3 or equiva-lent) window type A/C, 110 volt single phase, 15,000 BTUcooling
• Electrical and Lighting Package (power entry, main distribu-tion panel, circuit, switch, light fixtures)
• STANLEY VIDMAR cabinets and shelves
• Ext. Paint Color Choice of OD Green or Desert Tan
Double Doors One End (TYPE 1)20’ X 8’ Dry Freight ISO Cargo Container
NSN #: 8145-01-528-7562
STANDARD PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support
2” x 6” lumber• Vents, (2) each• Manifest Box (2) each• Military Standard 595B 33446 STANDARD TAN exterior paint• Technical Manual
20’ x 8’ Dry Freight ISO Cargo Container Double Doors Both Ends (Type 2)
STANDARD PRODUCT FEATURES• Corrugated steel sides, roof and swing doors on both ends• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. Each, (24 total) tested at 6,000 lbs.• Front corner post tie downs, (10 total)• Door corner post tie downs, (10 total) = restraint system shoring slot
will support 2” x 6” lumber• Vents, (2) each• Manifest box, (2) each• Shoring slot system behind cargo doors• Capable of secure storage and transport of Military Crew Serve Weapons• Able to restrain (13) each, CS3451 Universal Weapons Rack for transport storage
and rapid removal• Adjustable, heavy-duty, aluminum decking/shoring beams
Double Doors on Both Ends & Side (Type 3)20’ x 8’ Dry Freight ISO Cargo Container
PRODUCT FEATURES
STANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on both ends and one side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap each• (2) way laden fork lift pockets• Vents, (2) each• Military Standard 595B 33446 CARC TAN exterior paint
OPTIONAL FEATURES• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each• Adjustable shelving brackets (6) sets• Decking and shoring beams (18) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 8’ Dry Freight ISO
Container (Type 3)
Double D
oors on Both Ends and O
ne Side
CS
863.0
•
20’ x 8’ Dry Freight ISO Container (Type 3)Double Doors on Both Ends and One Side
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on Both Ends and One Side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Top and bottom tie down steel lashing rings, 4000 lbs. cap each (20 total) tested at 6,000 lbs.• Each door corner post has (4) shoring slots to accomodate a 2” x 6” lumber restraint system• (2) sets of forklift pockets, laden and unladen• Vents, (2) each• Military Standard 595B #34094 STANDARD GREEN or 595B #33446 STANDARD TAN exterior paint
OPTIONAL FEATURES• Military Standard 595B #34094 CARC GREEN or 595B #33446 CARC TAN exterior paint• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each• Adjustable shelving brackets (6) sets
CS863.0LENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENINGS
Double Doors on Both Ends & Double Side Doors20’ X 8’ 6” Dry Freight ISO Cargo Container
PRODUCT FEATURES
STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors on one end and one side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap each• (2) way laden fork lift pockets• Vents, (2) each
OPTIONAL FEATURES• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each• Adjustable shelving brackets (6) sets• Decking and shoring beams (18) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One End &
One Side (TYPE 4)
20’ X 8’ Dry Freight ISO
Cargo C
ontainer
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel side, roof + swing doors on (1) end and (1) side• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs = restraint system, shoring slot will support 2” x 6” lumber• Vents, (2) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One End &
One Side
20’ X 8’6” Dry Freight ISO
Cargo C
ontainer
PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end and (1) side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 CARC TAN exterior paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Double D
oors One End &
One Side
20’ X 8’6” Dry Freight ISO
Cargo C
ontainer
PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end and (1) side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 STANDARD TAN exterior paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 8’ 6” Dry Freight ISO
Cargo C
ontainerD
ouble Doors on B
oth Ends
PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on both ends• (2) way laden forklift pockets• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each (24 total)• Door corner post tie downs (20 total) = restraint system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 Tan exterior CARC paint• Technical Manual
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 8’ 6” Dry Freight ISO
Cargo C
ontainerD
ouble Doors on B
oth Ends
PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on both ends• (2) way laden forklift pockets• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each (24 total)• Door corner post tie downs (20 total) = restraint system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 STANDARD TAN exterior paint• Technical Manual
STANDARD FEATURES (MILL)• 120/208 Volt, 200 Amp, 3-Phase, electrical service
(Selectable: Generator or Shore Power)• 120/208 Volt, 100 Amp, 3-Phase output
Haas TM-1 Mill• PLS Rails with Bale Bar• Unist Lubricating System• Automatic Blackout Lighting• High Capacity Shelving/Locking Drawers• Mill Specific Machining Tools• Sturdy Workbench with Vise• Roof Access Ladder• Anti-Fatigue Mat• Communications I/O Panel
(Includes: RJ45, RJ11, DB9, BNC and Binding Posts)• Weather Proof Butting Kit to Lathe Container• 16” diameter air ducts• Rapid DeploymentOPTIONAL FEATURES (MILL)• 120/208 Volt, 100 Amp, 3-Phase, 30 KW Generator
PRODUCT FEATURES
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
STANDARD FEATURES (LATHE)• 120/208 Volt, 100 Amp, 3-Phase, electrical service• Haas TM-1 Lathe• PLS Rails with Bale Bar• Oil Free Scroll Air Compressor• Unist Lubricating System• Automatic Blackout Lighting• High Capacity Leveling Jacks• High Capacity Shelving/Locking Drawers• Lathe Specific Machining Tools• Sturdy Workbench with Hydraulic Press and Bench
(Includes: RJ45, RJ11, DB9, BNC and Binding Posts)• Weather Proof Butting Kit to Lathe Container• 16” diameter air ducts• Rapid DeploymentOPTIONAL FEATURES (LATHE)• 5 Ton Environmental Control Unit (ECU)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Two Full Side O
pening20’ X 8’ D
ry Freight ISO C
argo Container
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel ends + bifold swing doors on both sides• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Corner post tie downs• Floor recessed tie downs• Vents, (2) each
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
CS
892.6Tw
o Full Side Opening
20’ X 8’ 6” Dry Freight ISO
Cargo C
ontainer
•
PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel ends + bifold swing doors on both sides• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Corner post tie downs• Floor recessed tie downs• Vents, (2) each
STANDARD FEATURES• 8 special, patent pending ISO corner fittings• Lightweight aluminum sides• Lightweight aluminum roof• 3/8” thick aluminum floors• 2 sets of forklift pockets• Lightweight aluminum swing cargo door• Matches the inside of a 20’ ISO Container• Matches the outside base of a 20’ ISO
Container
OPTIONAL FEATURES• Air cargo restraint slots built into the 77” x 88”
base• Slider pads• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (3) ISEA horizontal interbox connector locks
STANDARD FEATURES• 8 special, patent pending ISO corner fittings• Lightweight aluminum sides• Lightweight aluminum roof• 3/8” thick aluminum floors• 2 sets of forklift pockets• Lightweight aluminum swing cargo door• Matches the inside of a 20’ or 40’ ISO Container• Designed to fit inside of a 20’ or 40’ (8’ 6”) ISO
Container• Matches the outside base of a 40’ ISO
Container
• Designed to fit on a standard 40’ Straight Frame Container Chassis Trailer
OPTIONAL FEATURES• Air cargo restraint slots built into the
77” x 88” base• Slider pads• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (3) ISEA horizontal interbox connector locks
STANDARD FEATURES• 8 special, patent pending ISO corner fittings• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors• 2 sets of forklift pockets• Matches the inside of a 20’ or 40’ ISO Container• Designed to fit inside of a 20’ or 40’ (8’ 6”) ISO
Container• Matches the outside base of a 40’ ISO
Container
• Designed to fit on a standard 40’ StraightFrame Container Chassis Trailer
OPTIONAL FEATURES• Air cargo restraint slots built into the
77” x 88” base• Slider pads• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (3) ISEA horizontal interbox connector locks
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 9’0” Collapsible D
eployable Shelter
STANDARD PRODUCT FEATURES• Lightweight, Collapsible Kit - can be stacked for
transport• Designed to meet requirements for rapid deployment• 10-minute construction by means of hoisting device
CONSTRUCTION• Unit, 8’6” high: can be stacked 2-high• External aluminum door (3’ x 7’): 270 degree opening• (1) piece, insulated panels (Roof/Sides/Floor)• Aluminum side panel (Inner/Outer) sheets• Aluminum frame• Smooth sides and pre-painted
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both
sides• Heavy duty steel floor• (4) way fork lift pockets• (1) 30” x 80” high steel personnel door
with (1) 16” x 16” window• (1) reinforced cutout frame for a window mount unit,
(1) cover plate installed for overseas shipping• 1 1/2” foam insulation and 3/8” plywood board with
white textured lining• (1) Grainger ES12 (part # 4PLD2), 208 A/C volt, single
Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7’ 10 1/4” 8’ 0” 7' 8 17/32" 4,189 lbs.
Metric 6,058 5,897 2,591 2,394 2,438 2,350 1,900 kg
20’ Collapsible Shelter
STANDARD FEATURES• Collapsible Kit - can be stacked 4 high• Constructed Unit, 8’ 6” high - can be stacked 2-high• (1) sets of forklift pockets• Insulated wall panels: 7.38” H x 3.28’ W x 4” (thick)
- 6 (each) per long side - 2 (each) per short side- Interchangeable Panels
• 1 external door: 7’ H x 3’ W x 1.5” D furnished withcylinder lock, pre-painted steel frame
• 2 (each) double layer windows (39” x 39”)- Dual Sliding- White PVC- 3mm thick glass- lockable
• Electrical components- Distribution box, 110V single phase- (2) overhead lights- flush mounted (2) sockets and (1) switches
• Units can be connected to create a larger structure• Knockdown style structure• 100mm Polyurethane Insulation (Density: 15 kg/m³)• Heating and Cooling Unit (Frigidaire FAH12E):
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 9’0” Collapsible R
e-Deployable Shelter 4B
4CC
S3893.7.C
RS
-4B4C
•
20’ x 9’0” Collapsible Re-Deployable Shelter 4B4C
FEATURES• Lightweight, Collapsible Shelter - can be stacked
4-high to make a 20’ ISO module 8’ high for transport• Designed to meet Military requirements for rapid
deployment• 1 Truck delivery• Collapsible end walls and one side wall• (2) Levels of floor space 20’ x 32’ each:
(4) CS3893.7.CRS-B (middle units, stacked 2-high) (4) CS3893.7.CRS-C (end units, stacked 2-high)• (2) ways of egress from each level
• (2) Aluminum stairs/walkway for upper level or roofaccess
• Durable, non-slip, waterproof interior floor coatingTRANSPORTABILITY• (8) Shelters on a truck or C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 4-high
(2) CRS-B and (2) CRS-C• 3” Urethane foam sandwiched between galvanized
steel construction for hardened personnel shelter protection
• Corrosion resistant side panel (inner/outer) sheets andframe
• Smooth sides and pre-painted• 20,000 lbs. Tare weightELECTRICAL• (2) overhead lights• Flush-mounted, (2) sockets and (1) switch• Plug and play electric mounted to interior ceiling, all
levels
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 9’0” Collapsible R
e-Deployable Shelter Type A
CS
3893.7.CR
S-A
•
20’ x 9’0” Collapsible Re-Deployable Shelter Type A
FEATURES• Lightweight, Collapsible Shelter - can be stacked 4-high to make
a 20’ ISO module for transport• Designed to meet Military requirements for rapid deployment• 10-minute set-up by means of lifting deviceTRANSPORTABILITY• (8) Shelters on a truck or inside a C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 2-high• External heavy duty, insulated door (36”’x80”)• Rigid CFC-free polyurethane foam insulation• Thick, insulated panels (roof/sides/floor) - R22 Insulation• Corrosion resistant panels (inner/outer), smooth and pre-paintedELECTRICAL• Power box, 120/240, 60 Hz NEC Code• (2) overhead lights• Surface-mounted, (4) duplex outletsNote: Optional features available up request
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 9’0” Collapsible R
e-Deployable Shelter Type B
CS
3893.7.CR
S-B
•
20’ x 9’0” Collapsible Re-Deployable Shelter Type B
FEATURES• Lightweight, Collapsible Shelter - can be stacked 4-high to make
a 20’ ISO module for transport• Designed to meet Military requirements for rapid deployment• Collapsible end walls, open sides • Combine with otherCS3893.7.CDS-B or CS3893.7.CDS-C to
create larger sheltersTRANSPORTABILITY• (8) Shelters on a truck or inside a C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 2-high• Thick, insulated panels (end walls) - R22 insulation• Rigid CFC-free polyurethane foam insulation• Corrosion resistant panels (inner/outer), smooth and pre-paintedELECTRICAL• (2) overhead lights• Surface-mounted, (4) duplex outletsNote: Optional features available up request
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDLENGTH HEIGHT WIDTH
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
20’ x 9’0” Collapsible D
eployable Shelter Type CC
S3893.7.C
RS
-C
•
20’ x 9’0” Collapsible Re-Deployable Shelter Type C
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
FEATURES• Lightweight, Collapsible Shelter - can be stacked 4-high to make
a 20’ ISO module for transport• Designed to meet Military requirements for rapid deployment• Collapsible end walls, open sides • Combine with otherCS3893.7.CDS-B or CS3893.7.CDS-C to
create larger sheltersTRANSPORTABILITY• (8) Shelters on a truck or inside a C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 2-high• Thick, insulated panels (end walls) - R22 insulation• Rigid CFC-free polyurethane foam insulation• Corrosion resistant panels (inner/outer), smooth and pre-paintedELECTRICAL• (2) overhead lights• Surface-mounted, (4) duplex outletsNote: Optional features available up request
Ft in 19’ 10 1/2” 19’ 4 11/64” 9’ 0” 8' 0" 8’ 0” 7' 8 17/32" 4,299 lbs.
Metric 6,058 5,897 2,743 2,438 2,438 2,350 1,950 kg
20’ Collapsible Shelter
STANDARD FEATURES• Collapsible Kit, 2’ high - can be stacked 4 high• Constructed Unit, 9’ 0” high - can be stacked 3-high• (2) sets of forklift pockets, laden and unladen• Insulated wall panels: 9’6” H x 3.75’ W x 2.75” (thick)
- 5 (each) per long side, fully interchangeable - 2 (each) per short side
• 1 external door: 7’ H x 3’ W x 2” D furnished withhandle lock, pre-painted aluminum frame
• 2 (each) double layer windows (32” x 43”)- “Sliding” mechanism (one side fixed and one sliding)
• Electrical components- Distribution box, 110V single phase- (2) overhead lights- flush mounted (2) sockets and (1) switches
• Units can be connected to create a larger structure• Thermal Conductivity Coefficient: 0.039 W/mK• Thermal Resistance (R21 Value): 1.28 m2K/W• Combination Heating/Cooling unit (110V)
OPTIONAL FEATURES• Plastic PVC rolling shutters provided• Anti Vandal Bars for windows• Anti Vandal Gate for door• Resin floor covering• Connection Kits (create larger structures)
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
CS
4712
•
The corrugated steel end walls fold on top of the baseproviding a five into 8ft 6in folded module. Theplatform is full width with no cut outs or recesses. Thewalls are spring counterbalanced for safety and easeof erection.Although superceded by the Type (10), the Type (1)flatracks have several optional features and can beprovided with:• Tarpaulins• Bale bars and PLS interface rails in the base• Ramp end walls (see Type 7)
Worldwide Spare PartsAs worldwide leaders in flatrack technology, the allimportant spare parts are available as they have beenfor more than 20 years.
PatentsPlease do not encourage copying of the patentedstructures and components.
STANDARD PRODUCT FEATURES
• Full width floor
• Large internal height
• Useful optional features of tarpaulins, bale barsand ramp ends
• Five units fold into 8’ 6”
• 9 high stacking at 24,000 Kgs
20ft Dom
ino Type (1)
20ft Domino Type (1)
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDEXTERNAL
Length Width Height Folded
Ft in 19’ 10 1/2” 8’ 0” 8’ 6” 1’ 8 25/64”
Metric 6,058 2,438 2,591 518
TARE WEIGHT PAYLOAD GROSS WEIGHT LOAD OVER 2m
Lbs 6,060 68,890 74,960 44,092
Kgs 2,750 31,250 34,000 20,000
INTERNAL
Wall Panel to Panel Mid-Post to Post Platform Width Height at Post
Ft in 19’ 6 23/32” 18’ 7 47/64“ 7’ 7 21/32” 7’ 5 1/2”
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
CS
4773
•
STANDARD FEATURES• Both end walls fold outward to serve as a ramp with
the additional wheel ramps for ease of loading trucks• Ramp end walls are counter balanced for
2-man operation• Storage pockets are provided for wheel ramps• Both end walls folding flush with the floor• 30-ton gross or more• Spare parts available worldwide• Designed for vehicles with 10,000 lbs. cap. (per axle)
on both ramps
20’ FLATRA
CK
With R
amp on B
oth End Walls
ISO C
argo Container
20’ FLATRACK With Ramp on Both End WallsISO Cargo Container
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD
Ft in 9' 8” 9’ 1 3/4” 7’4” 6’ 7 7/8” 7’ 7” 7’ 4” 6’ 3 5/8” 7’ 4”
TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY
Lbs 2,850 12,050 14,900 446 Cu. M.
STANDARD FEATURES• 4 standard + 4 special, patent pending ISO
• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors• 2 sets of ISO forklift pockets = (4 way)• Lightweight aluminum swing cargo door• Air cargo restraint slots built into the 88” x 108”
base• Matches the inside of a 20’ ISO Container• Designed to fit inside of a 20’ x 8’6” ISO
Container
• Matches the outside base of a 20’ ISOContainer
• Conforms to the exterior of a 20’ ISO Container• Designed to fit on a standard 23’ Container
Chassis Trailer
OPTIONAL FEATURES• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (2) ISEA + (2) quick-tie horizontal twistlock
connectors• Optional custom top ISO adaptors for standard
Ft in 14’ 13’ 7” 3’ 3” 2’ 8” 7’ 6” 7’ 2” 2’ 7” 12’ 8”
Metric 4,268 4,140 978 812 2,299 2,184 786 3,874
TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY
Lbs 2,160 7,840 10,000 244 Cu. Ft.
Kgs 980 3,560 4,540 6.9 Cu.M.
STANDARD PRODUCT FEATURES
• Designed for use with 463L Pallets• Can be stacked 2 high on a 40’ x 8’6” flatrack
and with flush twist locks• Four way forklift pockets• Wood flooring• (4) flush floor D-Rings on each side• All steel construction• (1) swing up “Gull Wing” door exposing one
side full opening and 1/2 the top (150 lb max)• (2) Hydraulic pistons of lifting assistance• (2) Door handles for one man lift
ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS
CS
47102
•
This flatrack benefits from a full width cargo deck,platform flat use when folded and high cube. In thecommercial market it is a popular model. Thecorrugated steel end walls lie directly on top of thefloor to become load bearing. Thus it can be usedas a platform flat for long cargos such as pipes orsawn timber. Internal height is better than a Type(4) and seven units fold into 8ft 6in. This is one of20 patent designs exclusive to CSA licensees.
The end walls are removable and can be laid foruse as a loading ramp for tyred vehicles up to 1.5tonne axle load. The tare weight is low and thepayload can be increased to high level making thisa highly versatile workhorse.
Worldwide Spare PartsAs worldwide leaders in flatrack technology, the allimportant spare parts are available as they havebeen for more than 20 years.
PatentsPlease do not encourage copying of the patentedstructures and components.
STANDARD FEATURES
• Use an occasional platform flat when folded
• Full width cargo deck
• Floor clear of recess over full length
• Removable end walls for vehicle loading
• End walls can be laid at loading ramps
• Spare parts available worldwide
• Commonly available
• Seven units fold into 8’ 6”
• 9 high stacking at 24,000 Kgs
20ft Dom
ino Type (10)C
orrugated Walls Fold on Floor
20ft Domino Type (10)Corrugated Walls Fold on Floor
ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDEXTERNAL
Length Width Height Folded
Ft in 19’ 10 1/2” 8’ 0” 8’ 6” 1’ 2 1/2”
Metric 6,058 2,438 2,591 370
TARE WEIGHT PAYLOAD GROSS WEIGHT LOAD OVER 2m
Lbs 6,060 68,890 74,960 44,092
Kgs 2,750 31,250 34,000 20,000
INTERNAL
Wall Panel to Panel Post to Post Platform Width Height at Post
Ft in 19’ 6 23/32” 18’ 3 39/64” 7’ 8 53/64” 7’ 5 1/2”