This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SINGLE TOGGLE JAW CRUSHERFor Primary Crushing of Hard Rocks & Mineral Ores
FEATURES
Best Engineered Geometry Rugged Construction Proven Performance
Capacities based on a bulk density of 1.6 t/cu.m of hard rocks; will vary with material characteristics and application. For Final selection kindly be in touch with thyssenkrupp.
JAW CRUSHER SELECTION
Furnish following information to enable us to recommend the right size of crusher best suited to your primary crushing application.
! Feed material & its characteristics
! Bulk density and gradation of feed with maximum lumpsize
! Feeding method proposal
Product gradation shown are indicative only; will vary with feed gradation and material characteristics.Contact for more information
PRODUCT GRADATION
Per
cent
Pas
sing
(%
)
sieve Size mm
TECHNICAL FEATURES! Its kinematics ensure smooth operation and long life! Well matched geometry and crushing dynamics! Totally resilient construction for high endurance against
shock loads! Robust swing jaw of box construction! Large diameter eccentric main shaft of forged alloy steel! Grease lubricated self-aligning double row roller bearings! High manganese cast steel machined jaw plates, fully
reversible, firmly secured and profiled for smooth flow and higher throughput
! Lubrication free toggle and toggle seat with minimum friction
! Hydraulic adjustment of CSS! Large crushing chamber, longer stroke and optimum
crushing speed! Higher nip angle to take maximum feed size and high
reduction ratio! Compact and well balanced suitable for fixed and mobile
plants
ASSEMBLY AND TESTINGThe machine is assembled under stringent quality environment, and test-run at factory for trouble free operation at site. Dispatched fully assembled for quick and ease of erection at site.
Fully fabricated with quality-tested weldable steel plates. Reinforced and ribbed to withstand heavy primary crushing loads. Complete frame is stress relieved for long life. Fully machined for accurate seating and alignment of all components.
The swing jaw is of robust construction, fully stress relieved and machined to provide a firm support for the jaw plate.
The jaw plates are of profiled construction and reversible for maximum wear life. The main shaft is forged alloy steel, hardened & tempered, and designed to withstand heavy primary crushing loads. Precision machined to close tolerances and fine finish, the large size main shaft offers fatigue resistance and long life. The swing jaw and main frame bearings are heavy-duty double-row roller bearings, precision assembled, grease lubricated, and fitted with foolproof labyrinth seals
against dust ingression. The bearing arrangements are designed for continuous duty applications.
The toggle system is designed to handle large crushing pressures. The toggle ends and toggle seats are specially prepared for smooth rocking and least friction under no lubrication environment. Manually operated hydraulic jack arrangement facilitates quick removal of toggle and closed side setting adjustment.