4. LINE1. GRID.125 2. SNAP.125 3. Draw as shown above 5. TRIM RESISTOR A. Open your Titlebox B. Erase EVERYTHING on the screen (border, text) C. Draw.

4. LINE1. GRID .1252. SNAP .125 3. Draw as shown above

5. TRIM

RESISTOR

A. Open your TitleboxB. Erase EVERYTHING on the screen (border, text)C. Draw the Resistor

Do not include words or dimensionsSAVEAS (not SAVE) ResistorErase the Resistor, and draw the Electronic Symbol on the next slide

5. PL 6. Click (Start of Arrow head)7. W8. .1259. 010. Aim towards direction of arrow point11 .125

1. Draw as shown above 2. Trim 3. Line

4. Trim

Do not include words or dimensionsSAVEAS (not SAVE) MeterErase the Meter, and draw the Electronic Symbol on the next slide

METERGRID .125SNAP .125

1. Draw as shown 2. Arrow Head - PL 3. Click (Start of Arrow head – thick end)4. W5. .1256. 07. Aim towards direction of arrow point8 .125

Do not include words or dimensionsSAVEAS (not SAVE) TransistorErase the Transistor, and draw the Electronic Symbol on the next slide

TRANSISTORGRID .125SNAP .125

1. Draw as shown above

2. Trim

3. Line (Plus sign)Do not include words or dimensionsSAVEAS (not SAVE) Electrolytic CapacitorErase the Electrolytic Capacitor, and draw the Electronic Symbol on the next slide

ELECTROLYTIC CAPACITORGRID .125SNAP .125

1. Draw as shown above2. Trim

3. Offset .125

4. Draw Line on the end5. Offset twice - .125

Do not include words or dimensionsSAVEAS (not SAVE) SwitchErase the Switch, and draw the Electronic Symbol on the next slide

SWITCH

6. Trim

GRID .125SNAP .125

1. Draw as shown above

Do not include words or dimensionsSAVEAS (not SAVE) BatteryErase the Battery, and draw the Electronic Symbol on the next slide

BATTERYGRID .125SNAP .125

CONNECTOR

1. Donut2. Inside diameter 0.0003. Outside diameter .25

Do not include words or dimensionsSAVEAS (not SAVE) ConnectorErase the Connector, and draw the Electronic Symbol on the next slide

GRID .125SNAP .125

Do not include words or dimensionsSAVEAS (not SAVE) SpeakerErase the Speaker, and draw the Electronic Symbol on the next slide

1. Draw as shown above2. Trim

3. Line 4. Offset 5. Erase outside lines

SPEAKERGRID .125SNAP .125

2. Arrow Heads - PL 3. Click (Start of Arrow head – point end)4. W5. 06. .1257. Aim towards thick end of arrow point8 .125

PHOTO CELL

1. Open Resistor drawing

2. Circle

3. Move Circle to the right.(Center of circle to midpoint of the

resistor Line)

4. Two Lines

Do not include words or dimensionsSAVEAS (not SAVE) Photo CellErase the Photo Cell, and draw the Electronic Symbol on the next slide

GRID .125SNAP .125

1. Arc 3. Copy

5. Trim

4. Lines

6. Lines 7. Circles

8. Trim 9. Arc and Lines

Do not include words or dimensionsSAVEAS (not SAVE) Ear PhoneErase the Ear Phone, and draw the Electronic Symbol on the next slide

EAR PHONE

2. Arc

GRID .125SNAP .125

Do not include words or dimensionsSAVEAS (not SAVE) AntennaErase the Antenna, and draw the Electronic Symbol on the next slide

ANTENNAGRID .125SNAP .125

NAND GATE

1. Draw as shown above

2. Trim

Do not include words or dimensionsSAVEAS (not SAVE) Nand GateErase the Nand Gate, and draw the Electronic Symbol on the next slide

GRID .125SNAP .125

DIODE

1. Draw as shown above

Arrow Head – 1. PL 2. Click (Start of Arrow head – point end)3. W4. 0 (zero)5. .1256. Aim towards thick end of arrow point7 .125

Do not include words or dimensionsSAVEAS (not SAVE) DiodeErase the Diode, and draw the Electronic Symbol on the next slide

GRID .125SNAP .125

LED

1. Open Diode drawing

2. Circle

3. Line

Arrow Head – 1. PL 2. Click (Start of Arrow head – point end)3. W4. 0 (zero)5. .1256. Aim towards thick end of arrow point7 .125

Do not include words or dimensionsSAVEAS (not SAVE) LEDErase the LED, and draw the Electronic Symbol on the next slide

GRID .125SNAP .125

TUNING CONTROL

Do not include words or dimensionsSAVEAS (not SAVE) Tuning Control Erase the Tuning Control, and draw the Electronic Symbol on the next slide

GRID .125SNAP .125

1. Lines, ArcArrow Head – 1. PL 2. Click (Start of Arrow head – point end)3. W4. 0 (zero)5. .1256. Aim towards thick end of arrow point7 .125

LAMP

1. Draw as shown above

2. Trim

Do not include words or dimensionsSAVEAS (not SAVE) LampDraw the Library boxes on the next slideInsert all symbols in the boxes as shown and label

GRID .125SNAP .125

DO NOT DRAW ITEMS IN RED