Top Banner
4 Functions Controlled By Lens Image focus- Quantity of light- Image area- Depth of field-
92

4 Functions Controlled By Lens

Dec 31, 2015

Download

Documents

lane-potter

4 Functions Controlled By Lens. Image focus- Quantity of light- Image area- Depth of field-. 4 Functions Controlled By Lens. Image focus- 3 techniques? 1. Turn a ring on barrel of lens 2. Zoom in, set focus, zoom out - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: 4 Functions Controlled By Lens

4 Functions Controlled By Lens Image focus-Quantity of light- Image area- Depth of field-

Page 2: 4 Functions Controlled By Lens

4 Functions Controlled By Lens Image focus- 3 techniques?

1. Turn a ring on barrel of lens

2. Zoom in, set focus, zoom out

3. Tape measure: measure camera to subject distance, set ring accordingly

Page 3: 4 Functions Controlled By Lens

4 Functions Controlled By LensQuantity of light- How do you determine f-stops?

focal length ------------------ = f-stops

lens diameter

-focal length- distance from focal plane (film) to optical centre of the lens)

*Remember: Lower # = Bigger Aperture

Page 4: 4 Functions Controlled By Lens

Quantity of Light Fast Lenses=?

-Larger maximum aperture-This leads to…

-shorter (faster) exposure time-capable of very shallow DOF

Slow Lenses=?-Smaller maximum aperture-This leads to…

-longer (slower) exposure time-NOT capable of very shallow DOF

Page 5: 4 Functions Controlled By Lens

4 Functions Controlled By Lens Image Area-

Each focal length has a given angle of view:

Short/Wide-21mm-35mm; curved/distorted

“Normal”- 50mm; approximates human sight

Narrow/Long-105mm-300mm; a.k.a. “telephoto,” creates a ‘flat’ image

Page 6: 4 Functions Controlled By Lens

4 Functions Controlled By Lens Depth of Field-

-Zone of focus between closest and farthest parts of the picture that are reasonably sharp.

-Controlled by three factors:– Lens Opening (Size of Aperture)

-smaller aperture=greater DOF-thus, high f-stop=greater DOF

– Focus Distance (camera to subject distance)-farther distance=greater DOF

– Focal Length (lens to focal plane)-shorter focal length=greater DOF

*Remember: Depth of Field extends about twice as far behind the plane at which the lens is focused as in front.

Page 7: 4 Functions Controlled By Lens

Depth of FieldWhat is hyperfocal distance?

-When camera is focused at this distance, DOF extends from ½ hyperfocal distance to infinity (∞).

Page 8: 4 Functions Controlled By Lens

Depth of Focus ≠ Depth of Field

Depth of Focus IS…

-Tolerance in the accuracy of the seating of the lens-The distance on either side of the focal plane where the film or CCD can be seated and still record an acceptably sharp image

Page 9: 4 Functions Controlled By Lens

Perspective Is dependent on ONE factor:

CAMERA-TO-SUBJECT DISTANCE!

Page 10: 4 Functions Controlled By Lens

The Lens and PerceptionDefine “Size Constancy”

-A perceptual distortion that causes a mismatch between how we see an image and how a lens records it (I.e., optical illusions-created in the mind, not the eye/lens)

Why is this important?-May lead to discrepancies between how we perceive something and how the lens actually records it on film.

Page 11: 4 Functions Controlled By Lens

Shutter Speed, Aperture and Film Speed Shutter Speed is measured by…

- Fractions of a second.- 4 = ¼, 8 = ⅛, etc., so bigger #’s = SHORTER amount of

time.

The size of the Aperture is measured in…- The size of the aperture is measured in F-STOPS.- The larger the f-stop #, the smaller the aperture.- F-stop = focal length/lens diameter

Common (ASA) film speeds include 50, 100, 200 ,400, etc. What does this doubling mean?-The doubling indicates that the film needs half as much

exposure time, or is TWICE as fast.

Page 12: 4 Functions Controlled By Lens

Shutter Speed, Aperture and Film Speed (summary):

Shutter speed: Each # increase denotes…

- A halving of the time the shutter is open

Aperture: Each f-stop increase denotes…

- A halving of the diameter of the aperture

Film speed: Each increase in ASA denotes…

-A halving of required exposure time for a given subject

Page 13: 4 Functions Controlled By Lens

Visual Design:Name the SEVEN VISUAL ELEMENTS:

1.) Space

2.) Line

3.) Shape

4.) Tone

5.) Colour

6.) Movement

7.) Rhythm

Page 14: 4 Functions Controlled By Lens

Visual Design: SpaceOpen Vs. Closed Space:

-Closed space…

…leaves NO room for interpretation: all the information you need is included in the frame.

-Open Space…

…DOES leave room for interpretation; for example, when a character is facing/reaching off screen, we don’t know what they’re reaching for.

Page 15: 4 Functions Controlled By Lens

Visual Design: LineName the EMOTIONAL QUALITIES of each type.

Horizontal

-Associated with stability, balance, restfulness/serenity.

Vertical

-Associated with power, strength.Diagonal

-Associated with confusion, chaos, internal struggles, tension, instability/imbalance.

Page 16: 4 Functions Controlled By Lens

Visual Design: Tone Define TONE.

- The value (light/dark) of objects in the shot.

- I.e., contrast vs. affinity.

What are the THREE ways to control TONE? 1. Art Direction (reflective)

2. Lighting (incident)

3. Exposure (less selective)

What is coincidence/non-coincidence?-Value range reveals the subject of the shot.

-Value range (partially) obscures the subject.

Page 17: 4 Functions Controlled By Lens

Visual Design: ColourWhat are the THREE attributes of COLOUR?

1.) Hue-

-red, orange, yellow, green, cyan, blue, violet

2.) Brightness--value/tonal range of colours, achieved by adding

black or white

3.) Saturation--saturation is the purity of the hue (more or less

grey)

-yellow desaturates to the lightest grey, while violet desaturates to the darkest grey.

Page 18: 4 Functions Controlled By Lens

Visual Design: MovementName the 2-DIMENSIONAL camera

movements.-pan, tilt, zoom

Name the 3-DIMENSIONAL camera movements.-dolly/track, boom, crane

*Define continuum of movement within the shot.

Page 19: 4 Functions Controlled By Lens

Visual Design: RhythmHow is visual rhythm created?

-Strategic use of stationary/moving objects and editing.

Define Alternation.-change

Define Repetition (of an alternation).Define Tempo (of the repetition of the

alternation).

Page 20: 4 Functions Controlled By Lens

Graphing Visual StructureContrast vs. AffinityWhat do a progression, a constant and

contrast/affinity look like as graphs?

-Progression=SLOPING line

-Constant=STRAIGHT line

-Contrast/Affinity=sudden SPIKE

Page 21: 4 Functions Controlled By Lens

Visual Structure Remember the Rule of Thirds Define “Headroom”

-Compositional space (negative space) above subject’s head. Define “Eye-room”

-Compositional space given in the direction the subject is looking (horror movie vs. other)

What are the common ASPECT RATIOS?-TV (standard def.): 4:3-HDTV: 16:9-Movie Theatre: 1:85:1; 2:39:1

Page 22: 4 Functions Controlled By Lens

The ShotWhat are the THREE BASIC SHOTS?

1.) Long Shot (LS)

2.) Medium Shot (MS)

3.) Close-up (CU)

Page 23: 4 Functions Controlled By Lens

The Shot: Hybrids/Hollywood Slang ECU

MCU/”Two T’s”

“Cowboy”

“Head to toe”

Tight shots/close shots

Wide/Master/Est. shots

Extreme close-up (less than whole face)

From mid-chest up From just above the

knee (MLS)- shows belt buckle

Full-body shot/full shot

A.k.a. Close-Up (CU)

A.k.a. Long Shot (LS)

Page 24: 4 Functions Controlled By Lens

The Shot: AnglesDefine High Angle.

-Camera placed ABOVE subject.

Define Low Angle.

-Camera placed BELOW subject.

Define Canted.

-Camera tilted laterally.

Page 25: 4 Functions Controlled By Lens

The Shot: Coverage Define Master Shot (MS/LS/Est.) Define Over the Shoulder (OS) Define “Cutaways”

-a shot to which the editor can cut in order to show an action or solve an editing problem.

Reaction shots Inserts

-Similar to Reaction shots; an insert is a shot of part of a scene as filmed from a different angle and/or focal length from the master shot. Inserts cover action already covered in the master shot, but emphasize a different aspect of that action due to the different framing. An insert is different from a cutaway in that the cutaway is of action not covered in the master shot.

Page 26: 4 Functions Controlled By Lens

Screen Grammar: What is Rabiger’s Approach?

Film works across cultures because it emulates human thought/the way our minds work.

Page 27: 4 Functions Controlled By Lens

Screen Grammar:According to Rabiger, what parallels are there in nature for…

Brief Shots

Held Shots

Close Shots

Wide Shots

Cursory glances used to orient ourselves

Long looks in which we indulge

Reproduce sensation of taking a detailed, focused look at something

Emulates the way we look at things that are large, busy or distant

Page 28: 4 Functions Controlled By Lens

Screen Grammar: Rabiger According to Rabiger, what motivates a moving-

camera shot in real life? -subject motivated (following target/moving object)

-search motivated (looking for a person/object)

-boredom motivated: reproduces natural tendency for wandering eye/attention

What are the THREE phases of a Moving-Camera Shot?1. Starting Composition

2. Movement

3. Ending Composition

Page 29: 4 Functions Controlled By Lens

Screen Grammar: Master Scene Technique

What is the “classic pattern” ?

MS > LS > Singles/OS > CU > Cutaways/Inserts

Define “Master Scene Technique”Approach in which director stages/shoots scene pretty much as it would be done in a theatre; all or part of scene is filmed in MS (a.k.a. est. shot), in which all/most of it’s elements are presented together.

What are some practical issues that arise?-How best to film CU’s; shooting out of sequence; who to cover first; off-camera dialogue

Page 30: 4 Functions Controlled By Lens

Screen Grammar: Shot/Reverse-Shot Technique

Define Shot/Reverse-Shot Technique.

-Involves 2 camera set-ups: 1 for person A, 1 for person B. Cut together creates a simple, back-and-forth exchange (good for conversations).

Page 31: 4 Functions Controlled By Lens

180 Degree Rule (the “line”/”axis”)

Can a scene have multiple/changing lines?-Yes, if there are multiple characters or moving

characters.

The Rule requires constant awareness of the actors’ ____?____

-eye-lines (lines of sight- to left or right?) Crossing the line intentionally is called a…

-Jump Cut Multiple characters = multiple…

-”lines”

Page 32: 4 Functions Controlled By Lens

Screen DirectionMaintain screen direction on entrances

and exits when scenes are close together _________ and __________.

-Geographically and temporally.

What two types of movement can change screen direction within a shot?

-Camera movement

-Object movement

Page 33: 4 Functions Controlled By Lens

Directorial Communication Tools:Name all FOUR.

1.) Shotlists

2.) Overheads

3.) Lined Script

4.) Storyboards

Page 34: 4 Functions Controlled By Lens

ScreenwritingKnow formatting.What is the fatal flaw of screenwriting?

-Passivity.What kind of descriptions should/should not

be included?-Script should include only what can be seen/heard; AVOID describing inner thoughts/emotions.

What is the Vonnegut Formula for a story?- ? ! .

Page 35: 4 Functions Controlled By Lens

Script Analysis According to Weston, what is the FIRST step?

-Cross out all screen directions- those are the director’s job!

Next?-Read the script allowed and compile first impressions.

What are “The Immutables” ?-Facts and Images which are implicitly stated and thus not subject to interpretation.

Next?-Imaginative choices- interpretation, including motivation (what’s at stake?) and choosing specific objectives and actions for each scene and each _______ within the scene.

A story can be divided up into major ______. Likewise, a scene can be divided into smaller _______.-events; beats.

Page 36: 4 Functions Controlled By Lens

Film/Video InterfaceDefine the two perceptual phenomena

that may explain perception of motion.

1.) Persistence of Vision:-an optical/perceptual phenomenon that prevents us

from seeing the dark space between the film frames by causing “flicker fusion”

2.) Phi Phenomenon:-also known at the “stroboscopic effect.” Creates

apparent movement from frame to frame.

Page 37: 4 Functions Controlled By Lens

Exposure time and Shutter Angle Formula

Exp. Time (Shttr Speed) = (1/Speed in FPS) X (angl of Shttr Opening/360)

(MEMORIZE)

Page 38: 4 Functions Controlled By Lens

Overcranking/UndercrankingDefine overcranking.

-To shoot at more than 48 frames per second (doing 72 slows it WAY down) - makes SLOW motion when played at 24 fps

Define undercranking.-To shoot at 12 fps - makes FAST motion when

played at 24 fps

Page 39: 4 Functions Controlled By Lens

Calculating Film LengthsHow many feet per minute for 35mm?

90ft / minute

How many feet per minute for 16mm?

36ft / minute

Page 40: 4 Functions Controlled By Lens

What are the layers in a piece of film?

1. Blue Sensitive Emulsion }

2. Yellow Dye } ***3. Green Sensitive Emulsion } In black & white

4. Magenta Dye } white film, only

5. Red-Sensitive Emulsion } ONE emulsion

6. Cyan Dye } layer.

7. Antihalation Layer

8. Base

Page 41: 4 Functions Controlled By Lens

Colour Temperature When shooting

Tungsten(indoor) balanced film outdoors, use…

This filter cuts ____ stops of light.

When shooting daylight balanced film in a Tungsten(indoor) situation, use…

This filter cuts ____ stops of light.

An amber filter (an 85)

2/3 of a stop

A blue filter (an 80a)

2 & 2/3 stops

Page 42: 4 Functions Controlled By Lens

Keeping Track of FilmWhat is the difference between

EDGE NUMBERS/KEY NUMBERS and KEYCODE?

-Edge/Key NUMBERS= #’s photographically printed between sprockets on raw film stocks.

-KeyCODE= (a sort of barCODE); electronically readable version of edge numbers, used during telecineing.

Page 43: 4 Functions Controlled By Lens

Video Controls

• Exposure (f stops)• Exposure Index (light sensitivity)• Depth of field• Colour balance (white balance)

Page 44: 4 Functions Controlled By Lens

Video Standards: NTSC

PAL/SECAM

HDTV

U.S. standard for TV: 2 interlaced frames, 29.97(~30)fps, 525 lines

European standard: 25fps (50 fields), 625 interlaced lines

720 or 1080i –only 1080 is interlaced, progressive (lines placed sequentially)

Page 45: 4 Functions Controlled By Lens

Resolution Standard TV =

-480 Pixels

HDTV =

-720 or 1080i

Page 46: 4 Functions Controlled By Lens

Define compression.Discarding of redundant digital

information/data in order to facilitate more efficient storage/recall of video footage (employed heavily with mini-DV format).

Page 47: 4 Functions Controlled By Lens

Colour Space

Refers to sampling rates for luminance and colour.

Luminance:Red:Blue

4 : 1 : 1 = DV

^Higher # = better.

Page 48: 4 Functions Controlled By Lens

Drop Frame Time-code = ? Drop frame timecode: drops average of 1.8

frame numbers (not frames!) per minute to account for fact that video is running at 29.97, not 30 frames per second.

Drops the ;00 and ;01 every minute except for the tenth minute.

Non-drop-frame timecode does not drop those frame numbers

Page 49: 4 Functions Controlled By Lens

Maintaining Continuity:According to lecture, what is the MOST

IMPORTANT part of continuity shooting?

-Overlapping action!

Page 50: 4 Functions Controlled By Lens

Lighting Eye light

Set light

Kicker

Accent Light

Practicals

often mounted near or on the camera. Puts a sparkle in the actor's eye

Illuminates the furniture and walls

similar to backlight, though traditionally lower and on the opposite side of the key

glint of a knife, glow of a wine bottle

light sources that are part of the scene

Page 51: 4 Functions Controlled By Lens

High Key/Low Key Lighting

HIGH KEY: Bright, flat

Little contrast of tone

Comedies, musicals, sitcoms

LOW KEY: Dark, Moody,

Atmospheric Significant contrast

of tone Horror, film noir,

mysteries, crime stories

Page 52: 4 Functions Controlled By Lens

Quality of Light: Specular vs. Diffused

SPECULAR: direct, hard light that

creates harsh shadows. Best example is the SUN

DIFFUSED: indirect, softer light

that creates diffused shadows. Diffused light passes through a medium (e.g. clouds) or diffusing material is reflected

Page 53: 4 Functions Controlled By Lens

Kelvin Scale & Colour Temp. 1500K 2800K 3200K

5500K

7-9000K

Candle Light 60-watt Bulb Tungsten Light/Film

Studio Lights Noon Summer

Sunlight Sunlight when

cloudy

Page 54: 4 Functions Controlled By Lens

Using Incident Light Meters measures foot-candles and suggests a f-stop for normal

exposure

Foot-candles = ?

-amount of light that falls one foot in any direction from a candle

Page 55: 4 Functions Controlled By Lens

Latitude (define it).Latitude is the "seeing range" of the

film, the amount of under or overexposure that the film stock can accept and still render objects with detail

Page 56: 4 Functions Controlled By Lens

Choosing An F-StopWhat to consider?

-Existing light/quality of light

-Depth of field: lower f-stop means shallower depth of field BUT sharper resolution

-Decide which areas you want to be middle grey/exposed (not under or over) and expose for

those.

Page 57: 4 Functions Controlled By Lens

Electricity BasicsWhat is the equation for calculating how

many watts of equipment you can hook up to a circuit?

Watts ÷ Volts = Amps

*Remember: US standard= 120 Volts

Page 58: 4 Functions Controlled By Lens

Electricity Basics in PracticeHow many amps per every 120 watts?

120watts ÷ 120volts= 1 Amp

What is a good safety margin for this?

1 Amp per every 100watts.

Page 59: 4 Functions Controlled By Lens

The Inverse Square Rule is…The intensity of light decreases by the

SQUARE of the distance away from the subject.

So if a light is moved from 10ft to 20ft away, how much is its intensity decreased?

10X10=100 20X20= 400 So, about FOUR times

Page 60: 4 Functions Controlled By Lens

Editing with Walter MurchAccording to Murch, the ideal cut would

meet all 6 of these criteria (in order):

1. Emotion

2. Story

3. Rhythm

4. Eye-Trace

5. 2-Dimensional Plane of Screen

6. 3-Dimensional Plane of Screen

Page 61: 4 Functions Controlled By Lens

Classic Hollywood Editing In this style, the story unfolds in ___________ order.

Within the scene, editing creates the illusion of ________ ______ and ________.

Classic Hollywood editing uses the _______ ________ technique.

chronological

Continuous time space

Master Scene

Page 62: 4 Functions Controlled By Lens

Why Cuts WorkName the two possible reasons why our

brains can accept cuts in movies.

1.) Cuts approximate the times of images we see in our dreams.

2.) Cuts resemble blinks, which serve to visually separate the two ideas in order to better juxtapose them mentally.

Page 63: 4 Functions Controlled By Lens

The crowbars of directing are…

What are you trying to MAKE the actor do?

What are you trying to GET the actor to do?

These questions involve 3 things:

1. A verb

2. A receiver

3. A desired response

Page 64: 4 Functions Controlled By Lens

What is one of the most important things to determine in casting?

Does the actor listen to the other actors AND the director?

Page 65: 4 Functions Controlled By Lens

4 Criteria to consider in casting:

Actor's ability (intuitive equipment,acting skills, physical abilities, artistic sensibility, heart)

Whether the actor is right for the part (does NOT mean physically)

Directibility

Casting relationships (cast the ensemble, not just the individual roles)

Page 66: 4 Functions Controlled By Lens

What are the stages of an audition?

• Check in• Greeting• Chit chat• The reading• Adjustment• Judge• Thanks and praise• Call backs

Page 67: 4 Functions Controlled By Lens

Above vs. Below the line Money negotiated/spent

BEFORE filming.

Rights to material on which the screenplay is based, the salaries for the screenwriter, director, producer, and actors.

In contrast to Above-the-Line, BELOW-the-line budget is usually FIXED.

Salaries of the non-starring cast members and the technical crew, as well as use of the film studio and its technical equipment, travel, location, and catering costs, etc.

Page 68: 4 Functions Controlled By Lens

What are the properties of physical sound? (5)

1. Propagation (process by which sound is transmitted through a medium as vibration)

2. Medium (substance through which sound travels)

3. Speed (1130 ft/second in air at room temperature, much slower than the speed of light)

4. Amplitude (vertical dimension of the wave, measured in dB -> loudness)

5. Wavelength and Frequency (number of occurrences of a wave per second, measured in Hz -> pitch)

Page 69: 4 Functions Controlled By Lens

Amplitude: Doubling of perceived loudness occurs at…

An increase of approximately 10 dB

The threshold of pain starts at…

…around 120 dB

Page 70: 4 Functions Controlled By Lens

How does the INVERSE SQUARE RULE apply to SOUND?

When the distance to a sound source DOUBLES, the size of the disturbance (level) diminishes to ONE QUARTER of

its original size.

Page 71: 4 Functions Controlled By Lens

Are short waves or long waves more easily absorbed by the atmosphere?

SHORT.

Why do sounds heard from far away seem low/”bassy” ?

All the higher frequencies have been absorbed by the time the sound reaches your ear.

Page 72: 4 Functions Controlled By Lens

Reflection (of sound)Much like light bouncing off a flat mirror,

when sound bounces of a hard, flat (non-absorbent) surface, the angle of ________ equals the angle of ________.incidence reflection

Page 73: 4 Functions Controlled By Lens

What is the profound difference between sight and hearing?

Sound can be heard around corners.

Page 74: 4 Functions Controlled By Lens

What is the effect of the Doppler Shift?

Sound generators in motion produce a perceived higher frequency as they approach a point of observation, and a corresponding lowering of the frequency as the object recedes.

Think of cars going by on a race track.

Page 75: 4 Functions Controlled By Lens

Room Acoustics: Name the THREE Sound Fields.

1.Direct Sound

2.Discrete Reflections

3.Reverberant Field

Page 76: 4 Functions Controlled By Lens

What are the TWO FACTORS that affect reverberation time?

Volume of the room.

Absorption of the surface area of the room.

Page 77: 4 Functions Controlled By Lens

Hearing Conservation

Hearing loss begins to occur when sound level is above ______. This is called the _______ _______.

Every _______ louder cuts the safely allowed time by _______.

80 dBthreshold level

3 dBhalf

Page 78: 4 Functions Controlled By Lens

What is the Loudness Effect?Known as the “______ ___" of hearing. It takes a finite amount of time for

loudness to grow to its full value. The range time for a high level but brief sound to reach nearly its full loudness is between 35 and 300 ms (__to __ frames at 24 fps).

integration time

1 8

Page 79: 4 Functions Controlled By Lens

Spatial Perception (of sound) The _________ Effect describes how we locate

sound using the first-arriving wavefront.

INFLUENCE OF SIGHT: For professionals, just a ___ degree mismatch on a horizontal plane between the visual and aural positioning is noticeable, whereas for the average layperson it takes ___ degrees.

THE COCKTAIL PARTY EFFECT: Also known as ______ __________ : the ability to discriminate sounds better through the use of 2 ears than through recording.

Precedence

4

15

Binaural Discrimination

Page 80: 4 Functions Controlled By Lens

Auditory Streams…Murch says that hearing can only attend

to __ of __ sounds presented at a time, so no more than __ foreground audio streams should occur simultaneously.

1 3

3

Page 81: 4 Functions Controlled By Lens

Speech Perception Is it better to “pan” dialogue to wherever

the person speaking is located or to keep it centred no matter what?

-keep it centred!

Name one instance when “panning” might be used for dialogue.

-for dialogue coming from characters off screen.

Page 82: 4 Functions Controlled By Lens

Frequency Response is…How evenly or completely a recorder or

playback format reproduces the audible range.

Humans can (generally) hear between ______ and _____ (Hz/kHz).

20 Hz – 20 kHz

Page 83: 4 Functions Controlled By Lens

Dynamic Range of audio equipment:

Dynamic Range is stated in _______ (unit) and is defined as _____ to _____ ratio.

The “overload level” or “headroom” refers to the threshold or level at which ______ occurs.

dB (decibels)signal noise

distortion

Page 84: 4 Functions Controlled By Lens

Is it better to process the signal while recording or in post?

In POST! It is best to get as clean a recording as possible.

Page 85: 4 Functions Controlled By Lens

Quantizing

This is the process of turning a waves Amplitude from _______ to ________ by assigning numerical values to each point on the waves, which correspond to it’s ________ at that point.

analog digital

loudness

Page 86: 4 Functions Controlled By Lens

SamplingSample rate is a little more than ______

the highest frequency in the desired bandwidth.

twice

Page 87: 4 Functions Controlled By Lens

Sound ResolutionThe number of bits being used to

represent the amplitude dimension, the number of stacked bins.

Page 88: 4 Functions Controlled By Lens

Did we use single or double system recording?

Single: Sound and image were recorded on the

same device (DV camcorder).

Page 89: 4 Functions Controlled By Lens

What is the correct order for calling a shot?

AD: Lock it up AD: Roll sound Sound Mixer rolls the recorder, verbally slates the

scene and take, “Speed” AD: Roll Camera Camera Operator, when camera is running: “Rolling” 2nd AC: “Marker”, then bangs the slate and exits Camera Operator: “Set” Director: Action Director: Cut or Tail Sticks/Tail Slate

Page 90: 4 Functions Controlled By Lens

Phase CancellationWhat is it?

-When 2 or more mics are going to the same channel, if they receive the sound at slightly different times (one at the top of the wave, one at the bottom), it can create an effect that cancels out some/all of the sound.

What Rule can prevent this?-The 3-1 Rule: No 2 mics should be close together than 3 time the distance from them to the subject.

Page 91: 4 Functions Controlled By Lens

What is the Proximity EffectSound gets bassy as mic gets in very

close proximity to the actor.

Page 92: 4 Functions Controlled By Lens

What is the difference between a traditional Narration-Based Documentary and a Personal Essay style documentary?

Not necessarily any difference in structure:

Can still be clear narrative/message, edited for time, with narration as backbone BUT…

…a Personal Essay documentary features a personal story in which themes and messages are delivered from a SUBJECTIVE narrative perspective.