COMPLETE REVISION October 2012 3URFHVV ,QGXVWU\ 3UDFWLFHV 6WUXFWXUDO PIP STF05501 Fixed Ladders and Cages Fabrication Details
COMPLETE REVISIONOctober 2012
PIP STF05501Fixed Ladders and Cages Fabrication Details
PUBLISHING HISTORY November 1994 Issued December 1999 Revision August 2000 Technical Correction February 2002 Technical Correction October 2012 Complete Revision
COMPLETE REVISION October 2012
Process Industry Practices Page 1 of 4
PIP STF05501Fixed Ladders and Cages Fabrication Details
Table of Contents
1. Introduction ................................. 2
2. References ..................................2
3. Definitions ...................................2
4. Requirements ..............................3
Drawings
PIP STF05501 COMPLETE REVISION Fixed Ladders and Cages Fabrication Details October 2012
Process Industry Practices Page 2 of 4
1. Introduction
1.1 Purpose
1.2 Scope
2. References
2.1 Process Industry Practices (PIP) Concrete Typical DetailsStructural and Miscellaneous Steel Fabrication Specification
2.2 Industry Codes and Standards
Standard Specification for Carbon Structural SteelStandard Specification for Carbon Steel Bolts and Studs, 60,000 psi
Tensile Strength2.3 Government Regulations
Regulations 29 CFR 1910 Subpart D (Walking-Working Surfaces)
3. Definitions
contract documents:
design drawings:
engineer of record:
PIP STF05501 COMPLETE REVISION Fixed Ladders and Cages Fabrication Details October 2012
Process Industry Practices Page 3 of 4
ladder fabricator:
owner:
purchaser:
structure/platform engineer:
structure/platform fabricator:
vessel engineer:
vessel manufacturer:
4. Requirements
PIP STS05120PIP STF05501-01 PIP STF05501-11
PIP STF05501-03
PIP STF05501 COMPLETE REVISION Fixed Ladders and Cages Fabrication Details October 2012
Process Industry Practices Page 4 of 4
PIP STF05501-03
PIP STF05501-02 PIP STF05501-03
ASTM A36/A36M
PIP STF05501-01
PIP STS05120
OSHA Regulations 29 CFR 1910 Subpart D
ASTM A307PIP STS05120