ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR 3 LAYER POLYETHYLENE COATING OF LINEPIPES Document No. A099-004-16-71-AD-41 Rev.0 Page 1 of 2 0 07.03.2011 ISSUED AS ADDENDUM ST RK RK Rev. No Date Purpose Prepared by Checked by Approved by Format No. EIL 1641-1924 Rev. 1 A099-004-16-71-AD-41-0_Addendum to 3LPE Spec.doc Copyright EIL – All rights reserved OIL & NATURAL GAS CORPORATION, LTD. HAZIRA-DAHEJ NAPHTHA PIPELINE PROJECT ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR 3 LAYER POLYETHYLENE COATING OF LINEPIPES 805 A-PDF Split DEMO : Purchase from www.A-PDF.com to remove the watermark
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR 3 LAYER
POLYETHYLENE COATING OF LINEPIPES
Document No. A099-004-16-71-AD-41 Rev.0
Page 1 of 2
0 07.03.2011 ISSUED AS ADDENDUM ST RK RK Rev.
No Date Purpose Prepared by
Checked by
Approved by
Format No. EIL 1641-1924 Rev. 1 A099-004-16-71-AD-41-0_Addendum to 3LPE Spec.doc Copyright EIL – All rights reserved
OIL & NATURAL GAS CORPORATION, LTD.
HAZIRA-DAHEJ NAPHTHA PIPELINE PROJECT
ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR
3 LAYER POLYETHYLENE COATING OF LINEPIPES
805
A-PDF Split DEMO : Purchase from www.A-PDF.com to remove the watermark
ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR 3 LAYER
POLYETHYLENE COATING OF LINEPIPES
Document No. A099-004-16-71-AD-41 Rev.0
Page 2 of 2
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
ADDENDUM/ AMENDMENT
SPECIFICATION NO. : 6-71-0041, Rev. 2 TITLE : Standard Specification for 3 Layer Polyethylene
Coating of Line pipes
Following amendments/additional requirements shall be applicable:
1.0 Refer Annexure-I of Page 27 of 27 The Annexure-I shall be Replaced by the following
ANNEXURE-I
LIST OF ACCEPTABLE COMBINATIONS OF COATING MATERIALS
The following combinations of coating materials are considered acceptable. In the event of award of contract, CONTRACTOR shall furnish the combination(s) proposed and re-confirmation of compatibility & properties of the proposed combination (s) from the raw materials Manufacturers & system properties.
Epoxy Powder (Manufacturer)
Adhesive (Manufacturer)
PE Compound (Manufacturer)
CORRO-COAT EP-F 2001 (JOTUN)
FUSABOND 158D (DUPONT)
SCLAIR 35 BP HDPE (NOVACOR)
CORRO-COAT EP-F 2002HW (JOTUN)
or SCOTCHKOTE 226N
(3M)
LUCALEN G3710E (LYONDELLBASELL)
LUPOLEN 4552 D SW 00413(LYONDELLBASELL)
PE 50-6109 (BASF)
or CORRO-COAT EP-F
2001/2002HW (JOTUN) or
SCOTCHKOTE 226N (3M)
ME 0420 (BOREALIS)
HE 3450 (BOREALIS/ BOROUGE)
CORRO-COAT EP-F 2001 (JOTUN)
LE – 149 V (S K CORPORATION)
ET 509 B (S K CORPORATION)
SCOTCHKOTE 226N (3M)
ME 0420 (BOREALIS)
PB 48A004 (GAIL)
Although the above combinations would be acceptable to COMPANY, the responsibility of suitability for application, performance, properties and compliance to the coating system requirements shall unconditionally lie with the CONTRACTOR.