MOSHELL NOTES – HOW TO http://www‐proxy.ericsson.se:3132/accelerated_pac_base.pac ‐ ericsson proxy http://utran01.epa.ericsson.se/moshell/content.php?content.7.php – moshell forum https://eforge.ericsson.se/account/login.php?return_to=%2Fprojects%2Fteit – teit system 1. 3gnocfm@lagos3> cd /home/nmsadm/moshell/sitefile Ls Ls ‐lart Cat ipdatabase – to get all ip or cat /home/nmsadm/moshell/sitefiles/ipdatabase 2. board etmc1 = 4 e1 etmc4 = 8 e1 etm4 = 2 atm, 1 atm = 64 e1 = 128 etmf4 = 4 atm , 1 atm = 64 e1 = 256 l+ / l ‐ to open/close log u+ / ‐ to create file and run file u+s – to create file simulasi trun – to run other file run – to run file yg didelete guna u+ ‐ run lognya str ‐i Iub_U0815‐Moretime_Information_Tech – to check single site h str – to see help on cmd str lgo – to check configuration log. Ntpconfig info – to check ftp server Get 1 – to get info set ntpServerAddressPrimary 'ip' – to set ip del u! ‘file yg disimpan’ – tuk tukar ke xml lpr atmt – traffic descriptor cat /c/license/licensekeys.xml – to read license pmr –m 4 – dptkan performance 4 hours ‘choice’ | egrep ‐i 756g –(10 | egrep ‐i 756g) ‐ dptkn performance site 756 ced | grep 0019sp0 ‐‐> print all cells configured on CC device 001900/sp0 ced | sort +4 ‐‐> print cell data sorted on the fifth field cedh ‐m 8,9,10 ‐‐> print cell group usage for modules 8, 9, 10. u! /home/SOCMINI/moshell_logfiles/logs_moshell/undo/undo_OFFLINE_OJRNC1_BEF_080423‐010508.mos – change to xml !cat /home/SOCMINI/moshell_logfiles/logs_moshell/undo/undo_OFFLINE_OJRNC1_BEF_080423‐010508.mos – to display cmd mo Del – tuk delete parent Rdel – tuk delete parent child Lrdel – tuk delete all Set – tuk set parent Lset – tuk set parent child l cat latihan.mo – tuk baca file latihan.mo uer ‐n 5 – to print imsi data for 5 user uestatus – check status trace ueenable imsi 621300114042500 bus_send bus_receive – trace on particular imsi uedisable 0 – utuk disable trace imsi
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MOSHELL NOTES – HOW TO http://www‐proxy.ericsson.se:3132/accelerated_pac_base.pac ‐ ericsson proxy http://utran01.epa.ericsson.se/moshell/content.php?content.7.php – moshell forum https://eforge.ericsson.se/account/login.php?return_to=%2Fprojects%2Fteit – teit system
1. 3gnocfm@lagos3> cd /home/nmsadm/moshell/sitefile
l+ / l ‐ to open/close log u+ / ‐ to create file and run file u+s – to create file simulasi trun – to run other file run – to run file yg didelete guna u+ ‐ run lognya str ‐i Iub_U0815‐Moretime_Information_Tech – to check single site h str – to see help on cmd str lgo – to check configuration log. Ntpconfig info – to check ftp server Get 1 – to get info set ntpServerAddressPrimary 'ip' – to set ip del u! ‘file yg disimpan’ – tuk tukar ke xml lpr atmt – traffic descriptor cat /c/license/licensekeys.xml – to read license pmr –m 4 – dptkan performance 4 hours ‘choice’ | egrep ‐i 756g –(10 | egrep ‐i 756g) ‐ dptkn performance site 756 ced | grep 0019sp0 ‐‐> print all cells configured on CC device 001900/sp0 ced | sort +4 ‐‐> print cell data sorted on the fifth field cedh ‐m 8,9,10 ‐‐> print cell group usage for modules 8, 9, 10. u! /home/SOCMINI/moshell_logfiles/logs_moshell/undo/undo_OFFLINE_OJRNC1_BEF_080423‐010508.mos – change to xml !cat /home/SOCMINI/moshell_logfiles/logs_moshell/undo/undo_OFFLINE_OJRNC1_BEF_080423‐010508.mos – to display cmd mo Del – tuk delete parent Rdel – tuk delete parent child Lrdel – tuk delete all Set – tuk set parent Lset – tuk set parent child l cat latihan.mo – tuk baca file latihan.mo uer ‐n 5 – to print imsi data for 5 user uestatus – check status trace ueenable imsi 621300114042500 bus_send bus_receive – trace on particular imsi uedisable 0 – utuk disable trace imsi
bo – tuk lihat module lhsh 011400 te log read – baca trace di mod 14 lh mod3 te e all UEH_EXCEPTION – untuk active trace UEH_EXCEPTION di mod 3 lh mod3 te disable all UEH_EXCEPTION – utk diactive UEH_EXCEPTION get rbslocal power – to get rbs power capability get all delay – get anntena delay get aal2 – list detail aal2 lst aal2 ‐ list aal2 get iub – to get hsdpa data get nodeb – to get nodeb data get all steer – to get hs alocation get all dlAttenuation – get attenuation value get ncell=756 power – to get tpower for site 756 on rnc pmx UTRANCELL=756 rrcconnect ‐m 2 ‐ to get 756 performance 2 hour on rnc pmx UTRANCELL=(756|757) rrcconnect ‐m 2 ‐ to get 756 and 757 performance 2 hour on rnc to set/deactive cv to rollback cvls – to check cv get config‐ to check software management set 325 rollbackOn true – to set rollback to on – 325 is proxy set 325 rollbackOn false – to set rollback to off to restart jvm get jvm – get java pr acl jvm – to know what cmd on java acc ‘pr’ restart – to restart java pglist – to know program information pgkill ‘handle’ – to kill program to reset/add sync get sync – to get syn ldn acl sync – to get cmd on sync acc 899 resetLossOfTracking – to reset sync
- put ldn sync ref :‐ Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,Cbu=1,ExchangeTerminal=1,E1PhysPathTerm=pp1 acc 899 addSyncRefResource
- put ldn sync ref :‐ Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,Cbu=1,ExchangeTerminal=1,E1PhysPathTerm=pp2 check radio get radio lst carrier , get fach,rach,pch to create new ntp server get 1 acl 1 acc 1 createNtpSecondary set 1 ntpServerAddressPrimary 10.199.202.10 set 1 ntpServerAddressSecondary 10.200.202.10 acl 1 acc 1 createNtpSecondary 10.200.202.10 64 1024 true
set 1 ntpBurstFlagPrimary true set 1 nodeLocalTimeZone UTC yes get 1 ntpconfig info readclock cvls cvms om_CXP9011610_1_R4C07_0804010_0910 MS_3GNOC ATP hi after set result :‐ U0024‐Starcoms_Mast_Lekki> get 1 080410‐09:22:00 10.49.32.145 7.0r RBS_NODE_MODEL_J_5_5 stopfile=/tmp/26453 ================================================================================================================= 1 ManagedElementData=1 ================================================================================================================= ManagedElementDataId 1 autoConfigurationAllowed true daylightSavingTime false dhcpServerAddresses s[0] = documentServerAddress hdVolumeCFreespace 80863232 hdVolumeCSize 307682816 logonServerAddress minimumHdVolumeCFreespace 0 nodeLocalTimeZone UTC nodeUTCTime 1207815720000 nodeUniqueID ntpBurstFlagPrimary true ntpBurstFlagSecondary true ntpMaxPollPrimary 1024 ntpMaxPollSecondary 1024 ntpMinPollPrimary 64 ntpMinPollSecondary 64 ntpServerAddressPrimary 10.199.202.10 ntpServerAddressSecondary 10.200.202.10 ntpServiceActivePrimary true ntpServiceActiveSecondary true performanceDataPath /c/pm_dataperformanceDataVolume /c/ piuGroupEscalationType 4 (WARM_AT_PIU_RESTART) swServerUrlList syncModeOperation 2 (WCDMA) ================================================================================================================= Total: 1 MOs
3. to check site
lst .354 – site id ldeb .354 – to deblock all bl .354 – to block all lh ru fui get devstat – to check vswr ‐ RBS 3116
Cabx (to check RBS status) lhsh 010200/port_0_dev_13 mcpaBoard temp lhsh 010200/port_0_dev_13 help lhsh 010200/port_0_dev_13 restart (if need to restart)
5. To check pm counters for E1
In RXI pr atmport=ms‐x‐y get <proxy> lpget Subrack=MS,Slot=x,PlugInUnit=1,Etm1=1,E1PhysPathTerm=ppy
6. To check E1‐MS port in RXI (add E1 for RBS)
In RNC st <sitename> get <proxy> iub
In RXI
pr .<iub> eg. pr .0095 lk <proxy> st atmport=ms‐x‐y bl lget ms‐2‐2 (then check iub number with STR printout – see tally or not) reservedBy Aal2PathVccTp=b0001a2 <‐‐‐‐‐ iub # = 0001
In RBS (when port is ready but E1 not pull through yet – so that no alarm)
pr atmport get <proxy> ie. get 1345 lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2 set <proxy> administrativeState 0 (to lock the 2nd physical port) set 194 administrativeState 0 (to lock the 2nd physical port)
lpr atmport=ms‐18‐1 lget atmport=ms‐18‐1 del <proxydown>‐<proxytop‐1> WARNING : Don’t remove the MS port del AtmPort=MS‐20‐1‐* (to delete the whole 63 ports of the ETMC41) lst Slot=18.*Vc12Ttp=1 or to block all ports : lbl Slot=18.*Vc12Ttp=*
get 1 (to see the performance directory) ls ‐l /p001200/pm/ | grep xml (to see the performance files) pst (list the scanners, status) pmr [‐m 5 –p 3] (get performance report) [for the last 5 hours + 3 ]
11. To create performance counters scanner
pst pgetsn <proxy> pcr <name> <mo‐name> <counter‐name> eg. pcr <rssi> cellcarrier pmAverageRssi pget <mo‐name> <counter‐name> to read the counters pbl/pdeb <proxy> to stop/resume scanner pdel <proxy> to delete scanner
12. To set SAC in Utrancell pr utrancell=ower serviceAreaRef (then) get utrancell=ower serviceAreaRef set utrancell=AMGMMU servicearearef LocationArea=1,servicearea=12 (SAC defined)
13. To set Electrical Tilt (RET) pr retdevice get <proxy> set <proxy> electricalAntennaTilt <value> get ret electrical
14. To set Latitude/Longitude get sector lat set sector latitude <value>
15. To log alarm in a nice format
lgevsm
16. Sample Scripts in moshell
for 10 Enter commmands (one per line), then type "done" > get radiolink num > wait 2 > done
17. To enable E1 supervision set
18. To create Group (eg. Not reserved VclTp) get vcltp reservedby !.*= lma <group‐name> vcltp reservedby !.*=
19. To create performance counters
pst
20. To check cell state In RBS
lst cell get radiolinks (to see how many line/s being used)
In RNC
lst utrancell st utrancell 1.*0 (cells Unlocked & Disabled)
21. To check RBS MO
In RBS st plug (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC) cabx cab (without the external parts)
22. To change PSC ( In RNC
st plug (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC) cabx cab (without the external parts)
23. To change SAC (Service Area Code) In RNC
Pr cell Get proxy Get set utrancell=KCC1BU servicearearef LocationArea=1,servicearea=284
24. To change maxtxpowerdl for specific cell (usually to clear CONGESTION alarms)
In RNC get CUV1BU_1 maxtxpowerdl ‐‐> in EMAS, click Utrancell, Properties, Cell (PCIPCH in Common Channel) set CUV1BU_1 maxtxpowerdl 402 maxtxpowerdl value stated as x10dBm (actual = 0.1x) maxtxpowerdl value usually 0.4 dBm lesser than maxDlPowerCapability (from RBS) thus if maxDlPowerCapability 422, maxtxpowerdl 418 (422 – 4) in P3 ‐ get SOGXBU_1 maximumtransmissionpower
In RBS determine max capability to transmit SUNWMU> get all xdl get all xdl ‐‐‐> in EMAS, click RBSLocalCell, Properties, Characteristics, Max & Min value example result printout = maxDlPowerCapability 422
27. To check network clock synchronisation In RNC & RBS
Read clock (GMT +8) ntpconfig info Check which OMNIFSERVER the node is connected to (i.e ntpServerAddressPrimary) – from get 1
28. To check atmport & pp (physical port)
In RBS lpr atmport vc32&33 for signaling lpget 1007 (vc proxy) – to see number of ATM traffic cells transferred get atmport=1‐2‐2 then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2 to un/lock have to set values 1 or 0
29. To administer state of Mos
In RBS St plug Deb proxy Bl proxy No need to use set 1 or set 0 (only for physical ports) otherwise use deb & bl
30. To autocreateCV In RNC & RBS
Get config Cv ls (2 CVs will be used for the autocreate CV function) Set “proxy” autoCreatedCVIsTurnedOn true/false Set timeForAutoCreatedCV (UTC time) Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)
31. To check SAC corruption In RNC
tg | grep ‐i kcc1bu lh mod1 cell get 1/1/1/1/2/1.44 cellData lookout for , sac int 10 } which states a wrong SAC value for the Utrancell get utrancell=kcc1bu cid (cid = SAC + sector number) get serviceArea=284 to confirm SAC for the cell
32. To any hanging modules
In RNC only stdh
33. To restart Node In RNC,RXI & RBS
acc 0 restart poll (to wait 20seconds until node comes up again) acc 0 manualrestart – for p5 platform
34. To create CV In RNC,RXI & RBS
cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV cvset CXP9010373%1_R11G ‐‐ to set the CV startable
35. To change LAC (Location Area Code) In RNC
get servicearea=132 get locationarea get routingarea get externalutrancell LAC ‐‐> corresponding LAC changed at neighbour RNC (if defined) set ExternalUtranCell=uefaMU_1 lac 12050 ‐‐>to change the externalutrancell LAC parameter for the particular cell at another/neighbour RNC
get utrancell=uefa lac ‐‐> to view externalutrancell LAC parameter at neighbour RNC get utrancell=cinoMU_3
36. To check plugin status In RNC & node B
st plugin st plugin 1 0 st plugin 0 1 lst plug 0
37. To enter Moshell with security enabled
In RNC & node B moshell ‐c host.p12 10.78.37.225
38. To block sectors via Moshell
In RNC St blip Bl the proxy Deb the proxy (can have multiple proxies for more cells)
39. To view delay & attenuation parameters within a sector
In RBS Get jumper Get feeder Get rbs xdl
40. To delete something already done with a script
In RNC/RXI/RBS First you have to generate the MO Delete script This is done by ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ Where add2nde1inrxi_PUJMMU.mo is the script which was run earlier And pujmrxibesi01.mo is the Delete Script Modify add2nde1inrxi_PUJMMU.mo so that downtime will be less Run pujmrxibesi01.mo to undo the wrongly defined MO Then run the modified/correct add2nde1inrxi_PUJMMU.mo
41. To check E1 state In RXI
St ms‐20‐2 Check whether port locked or not pr the port number pr pp(port#) Pr pp2 or pp7 (ETM1) lst Slot=8.*Vc12Ttp=5$ (ETMC41, MS‐8‐5) Get proxy and view admin state whether locked or not Then do deblocking Deb proxy St proxy Make sure port is deblocked (can also see in EMAS)
In RBS St atmport Check port lock state St pp St pp2 st pp3 st pp4
42. To check locked board in node In all nodes
lst plug 0
43. To restart / reload board In all nodes
Acc 000900 restart Acc 001400 reload
44. GSG – get set get In RNC
To activate type gsg To deactivate type gsg again Use run command (not trun)
45. run and trun In all nodes
trun is only for xml scripts run for scripts such as set DAGAMU_1 usedFreqThresh2dEcno ‐12 trun for running the last script : rbs_EQINMU_site_complete.mo run is for any script (txt for for example) open logfile l+ 20060113_CR003_RNCTGEM01.log cannot have undo mode while having gsg activated run CR003_13012006.txt close logfile
46. CAB printout 0 = slot 28, 1 = slot 1 In all nodes RXIKPNG02> cab 060206‐11:09:22 ....... ===================================================================================================== SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR ===================================================================================================== 0 1 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364489 0 2 HUB MP ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494707 +32C Active 0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494699 +31C StandbyReady 0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442436 0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442439 0 8 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644146 0 10 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644042 0 12 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644052 0 14 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644056 0 16 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644037
0 18 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644067 0 20 ET‐MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050708 TU86592867 0 24 ET‐M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545997 0 25 ET‐M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545998 0 26 ET‐M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545996 0 27 ET‐M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86546001 0 0 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364157 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Resources for CELL does not come up – apparently TD is defined as U42 lget AtmPort=MS‐24‐1,VplTp=vp1,VpcTp=1,VclTp=vc39 lrset AtmPort=MS‐24‐1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId AtmTrafficDescriptor=C2P4000
In RBS Resources for CELL does not come up – apparently TD is defined as U42 lget AtmPort=MS‐1‐2‐1,VplTp=vp1,VpcTp=1,VclTp=vc39 lrset AtmPort=MS‐1‐2‐1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId AtmTrafficDescriptor=C2P4000 pr. Bq ‐ must be win30 pr aal2 then get proxy for TransportNetwork=1,Aal2PathVccTp=ba1 then lpr AtmPort=1‐2‐1,VplTp=vp1,VpcTp=1,VclTp=vc39 get the proxy look for AtmTrafficDescriptor=C2P4000
52. Check E1 loop
In node lacc AtmPort=MS‐27‐1,VplTp=vp5 eteloopback
53. Check 101 or not
In node RNC & ATMCC only Pr vc21432 Pr vc*RBSID*32
62. Check security turn ON in RBS or NOT In node RBS
Lt manage Lt mana (also can) 1077 ManagedElementData=1 1078 SwManagement=1 get *ManagedElementData=1* proxy look for logonServerAddress if 10.125.7.201,10.125.7.202 ‐‐‐ then security OFF if https://ckpgominf2:8443/ericsson/servlet/sls,https://ckpgominf3:8443/ericsson/servlet/sls ‐‐‐‐ security ON
63. Check security turn ON in RBS or NOT In node RNC
Lt manage
64. To change all gsmrelation in the Node
In node RNC set GsmRelation qOffset1sn 1 (1 means 1 db) mom gsmrelation qoffset
65. To change gsmrelation of only some cells
In node RNC lset UtranCell=CHERMU_1,GsmRelation=RANEM1_2 qOffset1sn 7 (7 means 7 db)
66. To check what is in the RNCMODULE
In node RNC Lt rncmodule Get rncmodule Pr rncmodule (then get proxy oso can)
67. To check how many HSDPA users in a cell (must know CID)