BenQ America Corp.15375 Barranca Parkway. Suite A-205. Irvine,
CA 92618 Tel: (949) 255-9500 www.BenQ.us
Education Deal Registration –
http://promotions.benq.us/education/B2B Deal Registration -
http://promotions.benq.us/dealregistration/
Ideal Choice for Education and Home Entertainment Use!
The BenQ 3D goggles are exceptionally designed to provide an
immersive 3D viewing experience with BenQ’s DLP® LinkTM-enabled
projectors*.
*BenQ Projector with 3D Ready Function* Please visit the
http://www.benq.us/product/projector/3dglasses website for a full
list of supported products
3D Goggles SpecificationPart Number
Response Time
Contrast ratio (On/Off)
View Angle (Left/ Right)
Viewing Distance
Detect Type
Storage Temperature
Operation Temperature
Operation Humidity
Power Consumption
Batteries
Dimension (H x W x L)
Accessories
5J.J0T14.011
1.7ms
1000:1(typical)
50 degree (typical)
~8M
DLP Link (Photo Sensor)
-10~60˚C
0~50˚C
20~85%
4 mW (operation) / ~55hrs
CR2032 x 2 (pcs)
45.9 x 168.8 x 165.2(mm)
Quick start guide (paper) / Nose pad x 2 (Big/small)
3D Projection Ready on the Go
5
English
This glasses support DLP-LINK 3D Ready projectors. When DLP-LINK
signal has not been detected for 180seconds, the 3D glasses will
automatically turn off.
The 3D glasses will blink when the batteries are reaching the
end of life.
WARNING: The 3D glasses are not prescription eyewear,
sunglasses, nor a protective goggle. Do not use theglasses for any
general eyewear purposes (e.g., driving, reading, protection from
sunlight or ultraviolet light,etc.) as such use may result in
injury.
Cleaning the lensesClean the lenses whenever you notice dirt or
dust on the surfaces.• Clean the lenses with a commercially
available blower and/or lens cleaner.• If there is dirt or smears,
use lens-cleaning paper or moisten a soft cloth with lens cleaner
and gently wipe
the lens surfaces.
Never rub the lenses with abrasive materials.
Nose pieceReplace with one of two sizes fora comfortable fit
6
EnglishWARNING: To avoid the damage of battery cover, be sure to
follow the steps as illustrations for batteryinstallation.
4
English
Light SensorDo not block
Battery coverRemove battery cover, then install two CR2032 type
batteries.
ON buttonPress to start 3D function > Switch inverse images
between your eyes
4
English
Light SensorDo not block
Battery coverRemove battery cover, then install two CR2032 type
batteries.
ON buttonPress to start 3D function > Switch inverse images
between your eyes
4
English
Light SensorDo not block
Battery coverRemove battery cover, then install two CR2032 type
batteries.
ON buttonPress to start 3D function > Switch inverse images
between your eyes