This document is downloaded from DR‑NTU (https://dr.ntu.edu.sg) Nanyang Technological University, Singapore. 3D printing trends in building and construction industry: a review Tay, Yi Wei Daniel; Panda, Biranchi; Paul, Suvash Chandra; Noor Mohamed, Nisar Ahamed; Tan, Ming Jen; Leong, Kah Fai 2017 Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017). 3D printing trends in building and construction industry: a review. Virtual and Physical Prototyping, 12(3), 261‑276. https://hdl.handle.net/10356/88028 https://doi.org/10.1080/17452759.2017.1326724 © 2017 Informa UK Limited, trading as Taylor & Francis Group. This is the author created version of a work that has been peer reviewed and accepted for publication by Virtual and Physical Prototyping, Informa UK Limited. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1080/17452759.2017.1326724]. Downloaded on 29 Jun 2023 15:27:39 SGT