3D Metal Printing: Safety Challenges and Mitigation April 6, 2017 John A. Slotwinski, Ph.D. Additive Manufacturing Lead and Section Supervisor Research and Exploratory Development Department Johns Hopkins University Applied Physics Laboratory Associate Research Professor Department of Materials Science and Engineering Johns Hopkins University
15
Embed
3D Metal Printing: Safety Challenges and Mitigation...3D Metal Printing: Safety Challenges and Mitigation April 6, 2017 John A. Slotwinski, Ph.D. Additive Manufacturing Lead and Section
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
3D Metal Printing: Safety Challenges and Mitigation
April 6, 2017
John A. Slotwinski, Ph.D.
Additive Manufacturing Lead and Section SupervisorResearch and Exploratory Development Department
Johns Hopkins University Applied Physics Laboratory
Associate Research ProfessorDepartment of Materials Science and Engineering
Johns Hopkins University
2
At APL We Take AM Safety Very Seriously…
3
Outline
What is metal AM/3DP?What are the related hazards
and how do we mitigate them?What are the current safety
industry practices and standardization efforts? What are the lessons learned?
4
Additive Manufacturing Center of Excellence
5
Additive Manufacturing (aka 3DPrinting)
ASTM International: A process of joining materials to make objects from 3D model data, usually layer upon layer, as
opposed to subtractive manufacturing methodologies.