2 3 3D LED Flex 100 Modular, flexible LED linear lighting system The Morgan 3D LED Flex system has been developed for use in indirect architectural lighting projects such as cove lighting and wall wash lighting applications where the building surfaces are non linear with curved profiles and facades. The Morgan 3D LED Flex system incorporates an articulated joint system joining the LED heat sinks that allows the system to follow curved building surfaces while maintaining the 25 mm spacing between the LEDs thus ensuring continuous lit effects without shadows or dark areas. The friction ball joint allows adjustment in three dimensions so that the system can be installed to follow complex building profiles. One version of the mounting bracket snaps into a pre installed clip for easy instalation and removal in akward and tight spaces. After installation the individual modules can be adjusted by hand to optimise the light distribution. The ball joint design ensures that the modules will remain in position after adjustment. Each LED heat sink module can operate up to 10 Watts of LEDs giving a total light output of up to 5,000 lumens per mtr depending on the colour temperature and LED type. Total system efficiency depends on the power at which the LEDs are run. At maximum power giving up to 5,000 lumens per mtr the efficiency is in the region of 48 lumens per Watt with 2,700 K LEDs. 2011 Heydar Aliyev centre, Baku Architects Zaha Hadid associates Lighting design MBLD Adjustable mounting bracket with spring clip fixing Where easy instalation and removal in akward spaces is required. Allows heat sink module to rotate for precise aiming angle Finish to match heat sink 2 x 4.7 Watt LED arrays with reflectors RAD 3D LED Flex 100 CZ - 2 Supplied in 1.0 mtr (3.28') lengths as standard for 2700oK - add 27K for 3500oK - add 25K for 5500oK - add 55K Integral LV constant current drivers 30 V DC Supply Black Finish standard Other RAL colours to order 4 x 2.4 Watt LEDs no lenses RAD 3D LED Flex 100 NS6 - 4 Supplied in 1.0 mtr (3.28') lengths as standard Any multiple of 100 mm modules can be supplied to order for 2700oK - add 27K for 3500oK - add 25K for 5500oK - add 55K Integral LV constant current drivers 30 V DC Supply Black Finish standard Other RAL colours to order Fixed mounting bracket Where overal height is an issue. Space for connectors under mounting bracket. Heat sink modules remaing parallel to mounting surface but the system can still angle to follow complex curves. Finish to match heat sink Connector 16 Amp 3 pole Weiland connectors are used to join white light strips These can fit under the heat sink modules even when non adjustable mounting brackets are used. DMX connectors are fitted to RGBW systems to join the strips together. Adjustable mounting bracket Direct screw fixing into the mounting surface with heat sinks rotated. Allows heat sink module to rotate for precise aiming angle Finish to match heat sink 1 x 8 watt RGBW LED array with colour mixing lens Supplied in 1.0 mtr (3.28') lengths as standard RAD 3D LED Flex 100 MCE RGBS Integral DMX driver controller or can be supplied with remote DMX driver version Various beam angles and lens types 24 Volt DC Supply Black Finish standard Other RAL colours to order Power feed Input to white light 1 mtr (3.28') strips via 3 pole Weiland connector. 16 Amp capacity for power and pwm dimming line DMX connectors are fitted to RGBW systems 2011 Heydar Aliyev centre, Baku Architects Zaha Hadid associates Lighting design MBLD 2012 Burberry store Regent's street, London 3D LED Flex 100 DESIGN PLAN and MORGAN brochure Jan 2013 Print.indd 2-3 28/01/2013 15:12:18