3com-lanplex

8/14/2019 3com-lanplex

1/72

-- Copyright 1995 by 3Com Corporation. All rights reserved.-- MIB file name: lanplex-mib-- available in these 3Com devices: Lanplex hubs-- For support or more info, check 3Com's web page at http://www.3com.com

-- LANplex Management Information Base -- Version 1.2.9 -- 12 April, 1994

-- 3Com Corporation -- 85 Rangeway Road -- North Billerica, MA 01862 -- (508) 670-9009

-- Change History:-- 4/11/94 eah Removed

lpBridgePortAddressLearnedEvent and--

lpBridgePortAddressForgottenEvent traps-- 4/ 7/94 eah Added lp

BridgePortReceiveMulticastLimitExceededCount-- 6/30/93 eah Added lp

SystemSmtProxyEvents

-- 6/15/93 eah Added lpEthernetPortType-- 6/11/93 eah Added lpBridgeLo

calIndex-- 5/29/93 eah Deprecat

ed lpSlot express attributes.--

lpFddiMacReceiveMulticastThreshold, and--

lpEthernetPortReceiveMulticastThreshold--

Added lpSlotBridgeFunctionCount,--

lpSlotBridgeFunctionBaseIndex,--lpSystemSmtProxyTimeoutBase

-- 3/ 9/93 eah Added lpTrapEnterprise and lpTrapDest

--groups

-- 3/ 3/93 eah Added enum for ESM to board type

--objects

-- 2/18/93 eah Changedaddress threshold, address

--learned, and address forgotten events

--to use bridge attributes

-- 2/ 2/93 eah Creatednew group lpBridge

--Deprecated lpExpress,

--lpExpressFddiPort,


2/72

--lpExpressEthernetPort, and

--lpExpressEthernetPortAddress groups

--Added lpSystemBridgeFunctionCount to

--the lpSystem group

--Deprecated

--lpSystemExpressFunctionCount,

--lpSystemExpressFddiPortCount, and

--lpSystemExpressEthernetPortCount

-- 12/17/92 eah ReplacedlpPowerSupplyFailureType by

--lpPowerSupplyLastFailure which is

--read-only and includes a none value

--lpPowerSupplyFailureType was deprecated

--Changed lpPowerSupplyFailureEvent to--

use new object-- 3/ 1/92 jp Added ne

w groups using logical--

numbering scheme. Marked old groups--

as deprecated.-- 6/ 4/92 jp Added lp

FddiMacReceiveMulticastThreshold--

and lpEthernetPortReceiveMulticastThreshold--objects.

-- 6/15/92 jp Added lpFddiMacBeaconHistory object.

-----------------------------------------------------------------------------------

LANPLEX-MIB-1-2-9 DEFINITIONS ::= BEGIN

IMPORTSenterprises, Counter,

NetworkAddress

FROM RFC1155-SMIDisplayString

FROM RFC1213-MIBOBJECT-TYPE

FROM RFC-1212TRAP-TYPE

FROM RFC-1215;

-- This MIB module uses the extended OBJECT-TYPE macro as-- defined in [9], and the TRAP-TYPE macro as defined in [10]


3/72

synernetics OBJECT IDENTIFIER ::= { enterprises 114}

lanplex OBJECT IDENTIFIER ::= { synernetics 1 }

-- this is the lanplex MIB module

lanplexMib OBJECT IDENTIFIER ::= { lanplex 1 }

chassis OBJECT IDENTIFIER ::= { lanplexMib 1 }slot OBJECT IDENTIFIER ::= { lanplexMib 2 }spm OBJECT IDENTIFIER ::= { lanplexM

ib 3 }feam OBJECT IDENTIFIER ::= { lanplexMib 4 }fcm OBJECT IDENTIFIER ::= { lanplexM

ib 5 }port OBJECT IDENTIFIER ::= { lanplexMib 6 }eem OBJECT IDENTIFIER ::= { lanplexM

ib 7 }eemFddiMAC OBJECT IDENTIFIER ::= { lanplexMib 8 }eemEthernetPort OBJECT IDENTIFIER ::= { lanplexMib 9 }eemMACAddress OBJECT IDENTIFIER ::= { lanplexMib 10 }

-- The following are new groups defined in this revision

-- of the lanplex-mib. These groups contain all the functionality-- of the above named groups plus newly defined objects.

lpSystem OBJECT IDENTIFIER ::= { lanplexMib 11 }

lpSlot OBJECT IDENTIFIER ::= { lanplexMib 12 }

lpFddiMac OBJECT IDENTIFIER ::= { lanplexMib 13 }

lpEthernetPort OBJECT IDENTIFIER ::= { lanplexMib 14 }

lpFddiPort OBJECT I

DENTIFIER ::= { lanplexMib 15 }lpExpress OBJECT IDENTIFIER ::= { lanplexMib 16 }

lpExpressFddiPort OBJECT IDENTIFIER ::= { lanplexMib 17 }

lpExpressEthernetPort OBJECT IDENTIFIER ::= {lanplexMib 18 }

lpExpressEthernetPortAddress OBJECT IDENTIFIER ::= { lanplexMib 19 }

lpPowerSupply OBJECT IDENTIFIER ::= { lanplexMib 20 }

-- New group for bridge support

lpBridge OBJECT IDENTIFIER ::= { lanplexMib 21 }

-- New groups for controlling trap "filters"

lpTrapEnterprise OBJECT IDENTIFIER ::= { lanplexMib 22 }

lpTrapDest OBJECT IDENTIFIER ::= { lanplexMib 23 }


4/72

-- The LANplex Chassis Group-- The Chassis Group contains all objects used to manage the LAN

plex chassis,

-- Note that this group has been marked as deprecated and is-- included here for backward compatibilty. It will be removed-- from the next revision of the lanplex MIB. The objects define

d-- in this table are now available via the lpSystem group."

chassisId OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The unique identifier assigned to thisstation

during manufacturing."::= { chassis 1 }

chassisType OBJECT-TYPESYNTAX INTEGER {

other(1),

tweleveSlot(2),fourSlot(3)}

ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The type of the LANplex chassis."::= { chassis 2 }

chassisRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (1))ACCESS read-onlySTATUS deprecated

DESCRIPTION "The revision number of the LANplex chassis."

::= { chassis 3 }

chassisName OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The text string describing this chassis."

::= { chassis 4 }

chassisNameAbbrev OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The text string describing the genericname for

this chassis."::= { chassis 5 }


5/72

chassisManufacturer OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The text string describing the manufacturer of

this chassis."::= { chassis 6 }

chassisSlotCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of slots in the LANplex chassis."

::= { chassis 7 }

chassisBuildTime OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS deprecated

DESCRIPTION "The build time of the LANplex system software."

::= { chassis 8 }

chassisSoftwareRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (4))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The revision number of the LANplex system software.

Each byte indicates the following:

byte 0: major release number.byte 1: minor release number.byte 2: update number.byte 3:

bits 7-6: releasetype.

bits 5-0: supplemental idenrtifier."

::= { chassis 9 }

chassisControlPanelColumns OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS deprecatedDESCRIPTION

"The number of columns in the control panel

display."::= { chassis 10 }

chassisControlPanelLines OBJECT-TYPESYNTAX INTEGERACCESS read-only


6/72


"The number of lines in the control panel


chassisControlPanelText OBJECT-TYPESYNTAX OCTET STRING (SIZE (0..128))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The currently displayed text in the control panel


chassisAction OBJECT-TYPESYNTAX INTEGER {

other(1),reset(2)

}ACCESS read-writeSTATUS deprecated

DESCRIPTION "This object, when read, always returnsthe value other (1).

The behavior of setting this object to each of the

acceptable values is as follows:

reset: resets the LANplex system."

::= { chassis 13 }

-- The lanplex Slot Table

slotTable OBJECT-TYPESYNTAX SEQUENCE OF SlotEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of slot entries. A single instance of this

object exists for each slot in the LANplex chassis."

::= { slot 1 }

slotEntry OBJECT-TYPE

SYNTAX SlotEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A slot entry contains information common to a given slot

within a LANplex system

Note that this object has been marked asdeprecated and is


7/72

included here for backward compatibilty.It will be removed

from the next revision of the lanplex MIB. The objects defined

in this table are now available via thelpSlot table."

INDEX { slotIndex }::= { slotTable 1 }

SlotEntry ::=SEQUENCE {

slotIndexINTEGER,

slotBoardTypeINTEGER,

slotBoardRevisionOCTET STRING,

slotBoardStatusINTEGER,

slotBoardNameDisplayString,

slotBoardNameAbbrevDisplayString,

slotBoardAction

INTEGER}

slotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The physical slot number of this slot within the

LANplex chassis."::= { slotEntry 1 }

slotBoardType OBJECT-TYPESYNTAX INTEGER {unknown(1),emptySlot(2),spm(3),feam(4),fcm(5),eem(6),esm(7),fcm2(8)

}ACCESS read-onlySTATUS deprecated

DESCRIPTION"The type of board residing in this slot

."::= { slotEntry 2 }

slotBoardRevision OBJECT-TYPE

SYNTAX OCTET STRING (SIZE (1))ACCESS read-onlySTATUS deprecatedDESCRIPTION


8/72

"The revision number of the board in this slot."

::= { slotEntry 3 }

slotBoardStatus OBJECT-TYPESYNTAX INTEGER {

notPresent(1),testing(2),offline(3),online(4)

}ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The status of the board in this slot."::= { slotEntry 4 }

slotBoardName OBJECT-TYPESYNTAX DisplayString (SIZE (0..256))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The text string describing this board type."

::= { slotEntry 5 }

slotBoardNameAbbrev OBJECT-TYPESYNTAX DisplayString (SIZE (0..32))ACCESS read-onlySTATUS deprecatedDESCRIPTION

"The abbreviation used to describe thisboard type."

::= { slotEntry 6 }

slotBoardAction OBJECT-TYPESYNTAX INTEGER {

other(1),runDiagnostics(2)}

ACCESS read-writeSTATUS deprecatedDESCRIPTION

"This object, when read, always returnsthe

value other (1). The behavior of settingthis object

to each of the acceptable values is as follows:

runDiagnostics: runs the board'soffline diagnostics."

::= { slotEntry 7 }

-- The lanplex SPM Table

spmTable OBJECT-TYPESYNTAX SEQUENCE OF SPMEntryACCESS not-accessible


9/72


"A list of System Processor Module (SPM)entries. An entry

exists for each Slot Table Entry whose board type is SPM.

This table is indexed by the physical slot number of this

SPM within the LANplex chassis. The entries may not have

consecutive Slot Indices.





::= { spm 1 }

spmEntry OBJECT-TYPESYNTAX SPMEntry

ACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A SPM entry contains information commonto a single System

Processor Module (SPM) within a LANplexsystem."

INDEX { spmSlotIndex }::= { spmTable 1 }

SPMEntry ::=SEQUENCE {

spmSlotIndex

INTEGER,spmEthernetPortCountINTEGER,

spmBaseEthernetPortIndexINTEGER

}

spmSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The physical slot number of this slot w

ithin the LANplexchassis."

::= { spmEntry 1 }

spmEthernetPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of ethernet ports on this bo


10/72

ard."::= { spmEntry 2 }

spmBaseEthernetPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The system-wide index for the first ethernet port

on this board."::= { spmEntry 3 }

-- The lanplex FEAM Table

feamTable OBJECT-TYPESYNTAX SEQUENCE OF FEAMEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of FDDI Enterprise Access Module(FEAM) entries.

An entry exists for each Slot Table Entr

y whose board type is FEAM. This table is indexed by the physical slot number of

this FEAM within the LANplex chassis. The entries may not

have consecutive Slot Indices.




in this table are now available via thelpSlot table."::= { feam 1 }

feamEntry OBJECT-TYPESYNTAX FEAMEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A FEAM entry contains information common to a single FDDI

Enterprise Access Module (FEAM) within aLANplex system."

INDEX { feamSlotIndex }::= { feamTable 1 }

FEAMEntry ::= SEQUENCE {

feamSlotIndexINTEGER,

feamMACCountINTEGER,

feamBaseMACIndex


11/72

INTEGER,feamPortCount

INTEGER,feamBasePortIndex

INTEGER}

feamSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The physical slot number of this slot within the LANplex

chassis."::= { feamEntry 1 }

feamMACCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of FDDI MAC's present on this board."

::= { feamEntry 2 }

feamBaseMACIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The system-wide index of the first FDDIMAC on

this board. Additional MAC's on this board will have

consecutively increasing MAC indices following

this index."::= { feamEntry 3 }

feamPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of FDDI ports present on this board."

::= { feamEntry 4 }

feamBasePortIndex OBJECT-TYPE

SYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The system-wide index of the first FDDIport on

this board. Additional ports on this board will have

consecutively increasing Port indices following


12/72

this index."::= { feamEntry 5 }

-- The lanplex FCM Table

fcmTable OBJECT-TYPESYNTAX SEQUENCE OF FCMEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of FDDI Concentration Module (FCM) entries. An entry

exists for each Slot Table Entry whose board type is FCM. This

table is indexed by the physical slot number of this FCM

within the LANplex chassis. The entriesmay not have



included here for backward compatibilty.

It will be removed from the next revision of the lanplex MIB. The objects defined


::= { fcm 1 }

fcmEntry OBJECT-TYPESYNTAX FCMEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An FCM entry contains information commo

n to a single FDDI Concentration Module (FCM) within a LANplex system."

INDEX { fcmSlotIndex}::= { fcmTable 1 }

FCMEntry ::=SEQUENCE {

fcmSlotIndexINTEGER,

fcmPortCountINTEGER,

fcmBasePortIndex

INTEGER}

fcmSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION



13/72

chassis."::= { fcmEntry 1 }

fcmPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of FDDI ports present on this board."

::= { fcmEntry 2 }

fcmBasePortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The system-wide index of the first FDDIport on

this board. Additional ports on this board will have

consecutively increasing Port indices following

this index."

::= { fcmEntry 3 }

-- The lanplex Port Table

portTable OBJECT-TYPESYNTAX SEQUENCE OF PortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of port entries. A single instance of this

object exists for each port (excluding e

thernet ports) in the LANplex system.




in this table are now available either via the fddiPort group

or the enetPort group."::= { port 1 }

portEntry OBJECT-TYPESYNTAX PortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A Port entry contains information common to a

particular port located on a particularboard


14/72

within the LANplex system."INDEX { portSlotIndex, portIndex }::= { portTable 1 }

PortEntry ::=SEQUENCE {

portSlotIndexINTEGER,

portIndexINTEGER,

portLabelDisplayString

}

portSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION


LANplex chassis."::= { portEntry 1 }

portIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The index of the port on a particular slot."

::= { portEntry 2 }

portLabel OBJECT-TYPESYNTAX DisplayString (SIZE (0..32))ACCESS read-writeSTATUS deprecated

DESCRIPTION "An ASCII text string describing this port."

::= { portEntry 3 }

-- The lanplex EEM Table

eemTable OBJECT-TYPESYNTAX SEQUENCE OF EEMEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of Ethernet Express Module (EEM)entries. An entry

exists for each Slot Table Entry whose board type is EEM. This

table is indexed by the physical slot number of this EEM

within the LANplex chassis. The entriesmay not have



15/72




in this table are now available either via the slot group or

the express group."::= { eem 1 }

eemEntry OBJECT-TYPESYNTAX EEMEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An EEM entry contains information common to a single Ethernet

Express Module (EEM) within a LANplex system."

INDEX { eemSlotIndex }::= { eemTable 1 }

EEMEntry ::=

SEQUENCE {eemSlotIndexINTEGER,

eemFddiMACCountINTEGER,

eemBaseFddiMACIndexINTEGER,

eemEthernetPortCountINTEGER,

eemBaseEthernetPortIndexINTEGER,

eemAddressThresholdINTEGER

}

eemSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION


chassis."::= { eemEntry 1 }

eemFddiMACCount OBJECT-TYPE


"The number of FDDI MAC's present on this board."

::= { eemEntry 2 }

eemBaseFddiMACIndex OBJECT-TYPESYNTAX INTEGER


16/72


"The system-wide index of the first FDDIMAC on

this board. Additional FDDI MAC's on this board will

have consecutively increasing MAC indices following

this index."::= { eemEntry 3 }

eemEthernetPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of Ethernet ports present onthis board."

::= { eemEntry 4 }

eemBaseEthernetPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS deprecatedDESCRIPTION"The system-wide index of the first ethe

rnet port onthis board. Additional ports on this boa

rd will haveconsecutively increasing Port indices fo

llowingthis index."

::= { eemEntry 5 }

eemAddressThreshold OBJECT-TYPESYNTAX INTEGER


"A reporting threshold for the total number of Ethernet

Addresses known for this board. When this threshold

is reached the event eemAddressThresholdEvent is generated."

::= { eemEntry 6 }

-- The lanplex EEM FDDI MAC Table

eemFddiMACTable OBJECT-TYPESYNTAX SEQUENCE OF EEMFddiMACEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of EEM FDDI MAC entries. The entries may not

have consecutive slot indices.


17/72




in this table are now available via theexpressFddiPort group."

::= { eemFddiMAC 1 }

eemFddiMACEntry OBJECT-TYPESYNTAX EEMFddiMACEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An EEM FDDI MAC entry contains information common to an

FDDI MAC located on an EEM within a LANplex system."

INDEX { eemFddiSlotIndex, eemFddiMACIndex}::= { eemFddiMACTable 1 }

EEMFddiMACEntry ::=SEQUENCE {

eemFddiSlotIndexINTEGER,eemFddiMACIndex

INTEGER,eemFddiMACForwardedCts

Counter,eemFddiMACDroppedCts

Counter}

eemFddiSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS deprecatedDESCRIPTION"The physical slot number of this board.

"::= { eemFddiMACEntry 1 }

eemFddiMACIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"A unique value for each FDDI MAC on this board."

::= { eemFddiMACEntry 2 }

eemFddiMACForwardedCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS deprecatedDESCRIPTION

"A counter indicating the number of frames forwarded

by a MAC from an ethernet port to the F


18/72

DDI network."::= { eemFddiMACEntry 3 }

eemFddiMACDroppedCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS deprecatedDESCRIPTION

"A counter indicating the number of frames that were

dropped by a MAC due to local resource limitation or

unknown destination MAC address."::= { eemFddiMACEntry 4 }

-- The lanplex EEM Ethernet Port Table

eemEthernetPortTable OBJECT-TYPESYNTAX SEQUENCE OF EEMEthernetPortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of EEM Ethernet Express Port ent

ries. The slot indices may not be consecutive.

The MAC indices will be consecutive.




in this table are now available via theexpressEthernetPort group."

::= { eemEthernetPort 1 }

eemEthernetPortEntry OBJECT-TYPESYNTAX EEMEthernetPortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An EEM Ethernet Express Port entry contains information

common to an Ethenet Port located on anEthernet Express

Module (EEM) within a LANplex system."INDEX { eemEthernetPortSlotIndex, eemEthernetPortIndex

}::= { eemEthernetPortTable 1 }

EEMEthernetPortEntry ::=SEQUENCE {

eemEthernetPortSlotIndexINTEGER,

eemEthernetPortIndexINTEGER,

eemEthernetPortLabel


19/72

DisplayString,eemEthernetPortForwardedCts

Counter,eemEthernetPortDroppedCts

Counter,eemEthernetPortUTurnCts

Counter,eemEthernetPortState

INTEGER,eemEthernetPortAction

INTEGER}

eemEthernetPortSlotIndex OBJECT-TYPE


"The physical slot number of the slot containing

this port within the LANplex chassis."::= { eemEthernetPortEntry 1 }

eemEthernetPortIndex OBJECT-TYPE


"The index of the port on a particular EEM board.

This index ranges from 1 to eemEthernetPortCount."

::= { eemEthernetPortEntry 2 }

eemEthernetPortLabel OBJECT-TYPESYNTAX DisplayString (SIZE (0..32))ACCESS read-write

STATUS deprecatedDESCRIPTION"An ASCII text string describing this et

hernet port."::= { eemEthernetPortEntry 3 }

eemEthernetPortForwardedCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS deprecatedDESCRIPTION

"A counter indicating the number of frames forwarded

from this ethernet port on to the FDDI network."


eemEthernetPortDroppedCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS deprecatedDESCRIPTION

"A counter indicating the numer of frame


20/72

s received onthis port that were dropped due to the f

act that thedestination MAC address was determined t

o be on thesame ethernet segment as the source MAC

address.."


eemEthernetPortUTurnCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS deprecatedDESCRIPTION

"A counter indicating the number of frames received on this

ethernet port and directed to another ethernet port."


eemEthernetPortState OBJECT-TYPESYNTAX INTEGER {

onlineActive(1),

onlineInactive(2),offline(3)}


"The state of the Ethernet Express port."


eemEthernetPortAction OBJECT-TYPESYNTAX INTEGER {

other(1),

freezeAddress(2),flushAddress(3),flushDynamicAddress(4)

}ACCESS read-writeSTATUS deprecatedDESCRIPTION

"This object, when read, always returnsthe value other (1).



freezeAddress: causes all the learned dynamic addresses

to be converted into static addresses.

flushAddress: causes all the addresses to be flushed

from a port's address list.


21/72

flushDynamicAddress:

causes all the port's dynamic addresses

to be flushed from a port's address list."


-- The lanplex EEM Ethernet MAC Address Table

eemEthernetMACAddressTable OBJECT-TYPESYNTAX SEQUENCE OF EEMEthernetMACAddressEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of EEM Ethernet Express Remote MAC Address

entries. The slot indices may not be consecutive.

The port indices will be consecutive.


included here for backward compatibilty.It will be removedfrom the next revision of the lanplex MI

B. The objects definedin this table are now available via the

expressEthernetPort group."::= { eemMACAddress 1 }

eemEthernetMACAddressEntry OBJECT-TYPESYNTAX EEMEthernetMACAddressEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A collection of information describinga remote Ethernet MACdetected to be attached to an Ethernet E

xpress port."INDEX { eemEthernetMACAddressSlotIndex, eemEthernetMAC

AddressPortIndex, eemEthernetMACAddressIndex}

::= { eemEthernetMACAddressTable 1 }

EEMEthernetMACAddressEntry ::=SEQUENCE {

eemEthernetMACAddressSlotIndexINTEGER,

eemEthernetMACAddressPortIndexINTEGER,

eemEthernetMACAddressIndexINTEGER,

eemEthernetMACAddressTypeINTEGER,

eemEthernetMACAddressRemoteAddressOCTET STRING,

eemEthernetMACAddressIsStaticINTEGER,


22/72

eemEthernetMACAddressStaticPortINTEGER,

eemEthernetMACAddressAgeINTEGER

}

eemEthernetMACAddressSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"The physical slot number of the slot containing this EEM

within the LANplex chassis."::= { eemEthernetMACAddressEntry 1 }

eemEthernetMACAddressPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"The port index of this address entry within the table.

This index ranges from 1 to eemEthernetP

ortCount." ::= { eemEthernetMACAddressEntry 2 }

eemEthernetMACAddressIndex OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"The index of this address entry withinthe table."

::= { eemEthernetMACAddressEntry 3 }

eemEthernetMACAddressType OBJECT-TYPE

SYNTAX INTEGER { other(1),invalid(2)



Setting this object to invalid (2) willremove the

corresponding address entry from the table."


eemEthernetMACAddressRemoteAddress OBJECT-TYPESYNTAX OCTET STRING (SIZE (6))ACCESS read-writeSTATUS deprecatedDESCRIPTION

"The remote MAC address detected on thisEthernet Express

port."


23/72


eemEthernetMACAddressIsStatic OBJECT-TYPESYNTAX INTEGER {

isStatic(1),isDynamic(2)


"A value indicating whether this MAC address was statically

configured or was dynamically learned onthis port."


eemEthernetMACAddressStaticPort OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"If the object eemEthernetMACAddressIsStatic has

value isStatic(1), this object indicates

the port for which this MAC address was statically configured."


eemEthernetMACAddressAge OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"This object indicates the time elapsedsince this MAC address

was added to this port's address table."


-- XXX NEW GROUPS-- The lanplex system Group

lpSystemId OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The unique identifier assigned to thissystem

during manufacturing."::= { lpSystem 1 }

lpSystemType OBJECT-TYPESYNTAX INTEGER {

other(1),tweleveSlot(2),fourSlot(3)

}ACCESS read-only


24/72

STATUS mandatoryDESCRIPTION

"The type of the LANplex system."::= { lpSystem 2 }

lpSystemName OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The text string describing this system."

::= { lpSystem 3 }

lpSystemManufacturer OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The text string describing the manufacturer of

this system."::= { lpSystem 4 }

lpSystemBackplaneRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (1))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The revision level of the system backplane.

Bits 6 and 7 indicate the artwork revision.

Bits 0 through 5 indicate the rework level."

::= { lpSystem 5 }

lpSystemSlotCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of slots in the system."::= { lpSystem 6 }

lpSystemMemorySize OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The amount of memory (RAM), in bytes, present

on the system processor board."::= { lpSystem 7 }

lpSystemFlashMemorySize OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


25/72

"The amount of flash memory, in bytes, present

on the system processor board."::= { lpSystem 8 }

lpSystemNvMemorySize OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The amount of non-volatile memory, in bytes,

present on the system processor board."::= { lpSystem 9 }

lpSystemSoftwareRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (4))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The revision number of the LANplex system software.

Each byte indicates the following:byte 0: major release number.

byte 1: minor release number.byte 2: update number.byte 3:

bits 7-6: releasetype.

bits 5-0: supplemental identifier."

::= { lpSystem 10 }

lpSystemBuildTime OBJECT-TYPESYNTAX DisplayString (SIZE (0..128))ACCESS read-onlySTATUS mandatory

DESCRIPTION "The build time of the system software."::= { lpSystem 11 }

lpSystemControlPanelHardwareRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (1))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"An 8-bit value specifying the revisionlevel of

the control panel hardware."::= { lpSystem 12 }

lpSystemControlPanelSoftwareRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (1))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"An 8-bit value specifying the revisionlevel of

the control panel software."::= { lpSystem 13 }


26/72

lpSystemControlPanelLines OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of lines in the control panel

display."::= { lpSystem 14 }

lpSystemControlPanelColumns OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of columns in the control panel

display."::= { lpSystem 15 }

lpSystemControlPanelText OBJECT-TYPESYNTAX OCTET STRING (SIZE (0..128))ACCESS read-only

STATUS mandatoryDESCRIPTION"The currently displayed text in the con

trol paneldisplay."

::= { lpSystem 16 }

lpSystemFddiMacCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of FDDI MAC's present in the

system." ::= { lpSystem 17 }

lpSystemFddiPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of FDDI ports present in thesystem."

::= { lpSystem 18 }

lpSystemEthernetPortCount OBJECT-TYPE

SYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of ethernet ports present inthe system."

::= { lpSystem 19 }

lpSystemExpressFunctionCount OBJECT-TYPESYNTAX INTEGER


27/72


"The number of Ethernet Express functions present in

the system. Curently this value is equalto the number

of Express boards present in the system."

::= { lpSystem 20 }

lpSystemExpressFddiPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of Ethernet Express FDDI ports present

in the system."::= { lpSystem 21 }

lpSystemExpressEthernetPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS deprecatedDESCRIPTION"The number of Ethernet Express ethernet

portspresent in the system."

::= { lpSystem 22 }

lpSystemPowerSupplyCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of power supply units presen

t in the system." ::= { lpSystem 23 }

lpSystemAction OBJECT-TYPESYNTAX INTEGER {

other(1),reset(2)

}ACCESS read-writeSTATUS mandatoryDESCRIPTION




reset: resets the LANplex system."

::= { lpSystem 24 }

lpSystemBridgeFunctionCount OBJECT-TYPESYNTAX INTEGER


28/72

ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of bridge functions presentin

the system. Curently this value is equalto the sum of

the number of Express and Switching modules in the system."

::= { lpSystem 25 }

lpSystemSmtProxyTimeoutBase OBJECT-TYPESYNTAX INTEGER (1..10)ACCESS read-writeSTATUS mandatoryDESCRIPTION

"The initial timeout value, in seconds,before the SMT

proxy attempts to backoff and retry. Since the SMT proxy

will attempt three retries before determining that the

proxied station is not answering, with the timeout

doubling for each retry, the total timefor a request totime out is equal to seven times the bas

e timeout value."::= { lpSystem 26 }

lpSystemSmtProxyEvents OBJECT-TYPESYNTAX INTEGER {

enable(1),disable(2)

}ACCESS read-writeSTATUS mandatory

DESCRIPTION "This object determines if the SMT proxywill generate

traps for SMT events occuring at other stations. If

enabled, the SMT proxy will generate traps for all SMT

events, those that occur locally, and those that occur

at other stations. If disabled, the SMTproxy will only

generate traps for events which occur locally. The

default value for this object is enabled(1)."

::= { lpSystem 27 }

-- The lanplex Slot Table

lpSlotTable OBJECT-TYPESYNTAX SEQUENCE OF LpSlotEntryACCESS not-accessible


29/72


"A list of slot entries. A single instance of this

object exists for each slot in the LANplex system."

::= { lpSlot 1 }

lpSlotEntry OBJECT-TYPESYNTAX LpSlotEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A slot entry contains information common to a given

slot within a LANplex system."INDEX { lpSlotIndex }::= { lpSlotTable 1 }

LpSlotEntry ::=SEQUENCE {

lpSlotIndexINTEGER,

lpSlotBoardType

INTEGER,lpSlotBoardRevisionOCTET STRING,

lpSlotBoardStatusINTEGER,

lpSlotBoardNameDisplayString,

lpSlotBoardNameAbbrevDisplayString,

lpSlotFddiMacCountINTEGER,

lpSlotFddiMacBaseIndexINTEGER,

lpSlotFddiPortCountINTEGER,lpSlotFddiPortBaseIndex

INTEGER,lpSlotEthernetPortCount

INTEGER,lpSlotEthernetPortBaseIndex

INTEGER,lpSlotExpressFunctionCount

INTEGER,lpSlotExpressFunctionBaseIndex

INTEGER,lpSlotExpressFddiPortCount

INTEGER,lpSlotExpressFddiPortBaseIndex

INTEGER,lpSlotExpressEthernetPortCount

INTEGER,lpSlotExpressEthernetPortBaseIndex

INTEGER,lpSlotBoardAction

INTEGER, lpSlotBridgeFunctionCount


30/72

INTEGER,lpSlotBridgeFunctionBaseIndex

INTEGER}

lpSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


system."::= { lpSlotEntry 1 }

lpSlotBoardType OBJECT-TYPESYNTAX INTEGER {

unknown(1),emptySlot(2),spm(3),feam(4),fcm(5),eem(6),esm(7),

fcm2(8)}ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The type of board residing in this slot."

::= { lpSlotEntry 2 }

lpSlotBoardRevision OBJECT-TYPESYNTAX OCTET STRING (SIZE (1))ACCESS read-onlySTATUS mandatory

DESCRIPTION "The revision number of the board in this slot."


lpSlotBoardStatus OBJECT-TYPESYNTAX INTEGER {

notPresent(1),testing(2),offline(3),online(4)

}ACCESS read-only


"The status of the board in this slot."::= { lpSlotEntry 4 }

lpSlotBoardName OBJECT-TYPESYNTAX DisplayString (SIZE (0..256))ACCESS read-onlySTATUS mandatoryDESCRIPTION


31/72

"The text string describing this board."::= { lpSlotEntry 5 }

lpSlotBoardNameAbbrev OBJECT-TYPESYNTAX DisplayString (SIZE (0..32))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"The abbreviation used to describe thisboard."


lpSlotFddiMacCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of FDDI MAC's present in this slot."


lpSlotFddiMacBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS mandatoryDESCRIPTION"The index of the first FDDI MAC in this

slot."::= { lpSlotEntry 8 }

lpSlotFddiPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of FDDI ports present in this slot."


lpSlotFddiPortBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The index of the first FDDI port in this slot."


lpSlotEthernetPortCount OBJECT-TYPESYNTAX INTEGER


"The number of ethernet ports present inthis slot."


lpSlotEthernetPortBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-only


32/72


"The index of the first ethernet port inthis slot."


lpSlotExpressFunctionCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of Express functions presentin this slot."


lpSlotExpressFunctionBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The index of the first Express functionin this slot."


lpSlotExpressFddiPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of Express FDDI ports present in this slot."


lpSlotExpressFddiPortBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecated

DESCRIPTION "The index of the first Express FDDI port in this slot."


lpSlotExpressEthernetPortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of Express ethernet ports present

in this slot."


lpSlotExpressEthernetPortBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The index of the first Express ethernetport

in this slot."


33/72


lpSlotBoardAction OBJECT-TYPESYNTAX INTEGER {

other(1),runDiagnostics(2)


"This object, when read, always returnsthe

value other (1). The behavior of settingthis object

to each of the acceptable values is as follows:

runDiagnostics: runs the board'soffline diagnostics."


lpSlotBridgeFunctionCount OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS mandatoryDESCRIPTION"The number of bridge functions present

in this slot."::= { lpSlotEntry 20 }

lpSlotBridgeFunctionBaseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The index of the first bridge functionin this slot."


-- FDDI MAC group

lpFddiMacTable OBJECT-TYPESYNTAX SEQUENCE OF LpFddiMacEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of FDDI MAC entries. A single instance of

this object exists for each FDDI MAC pre

sentin the system."

::= { lpFddiMac 1 }

lpFddiMacEntry OBJECT-TYPESYNTAX LpFddiMacEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"An FDDI MAC entry contains information


34/72

common to aparticular FDDI MAC within the system."

INDEX { lpFddiMacIndex }::= { lpFddiMacTable 1 }

LpFddiMacEntry ::=SEQUENCE {

lpFddiMacIndexINTEGER,

lpFddiMacSlotIndexINTEGER,

lpFddiMacLocalIndexINTEGER,

lpFddiMacByteReceiveRateINTEGER,

lpFddiMacPeakByteReceiveRateINTEGER,

lpFddiMacFrameReceiveRateINTEGER,

lpFddiMacPeakFrameReceiveRateINTEGER,

lpFddiMacByteTransmitRateINTEGER,

lpFddiMacPeakByteTransmitRate

INTEGER,lpFddiMacFrameTransmitRateINTEGER,

lpFddiMacPeakFrameTransmitRateINTEGER,

lpFddiMacReceiveMulticastThresholdINTEGER,

lpFddiMacBeaconHistoryOCTET STRING

}

lpFddiMacIndex OBJECT-TYPESYNTAX INTEGER


"A unique value for each FDDI MAC in thesystem.

The MAC identified by a particular valueof this

index is the same MAC as identified by the same

value of ifIndex."::= { lpFddiMacEntry 1 }

lpFddiMacSlotIndex OBJECT-TYPE


"The slot number corresponding to the physical location

of this MAC."::= { lpFddiMacEntry 2 }

lpFddiMacLocalIndex OBJECT-TYPE


35/72


"The index of this MAC relative to the slot on which it

is physically present."::= { lpFddiMacEntry 3 }

lpFddiMacByteReceiveRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The average number of bytes received per second by this

MAC during the most recent sampling period."

::= { lpFddiMacEntry 4 }

lpFddiMacPeakByteReceiveRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatory

DESCRIPTION "The peak value of lpFddiMacByteReceiveRate for

this MAC since the system was last initialized."


lpFddiMacFrameReceiveRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The average number of frames received p

er second by this MAC during the most recent sampling period."


lpFddiMacPeakFrameReceiveRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The peak value of lpFddiMacFrameReceiveRate for

this MAC since the system was last initi

alized."::= { lpFddiMacEntry 7 }

lpFddiMacByteTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The average number of bytes transmittedper second by


36/72

this MAC during the most recent samplingperiod."


lpFddiMacPeakByteTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The peak value of lpFddiMacByteTransmitRate for



lpFddiMacFrameTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The average number of frames transmitted per second by

this MAC during the most recent samplingperiod."


lpFddiMacPeakFrameTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The peak value of lpFddiMacFrameTransmitRate for



lpFddiMacReceiveMulticastThreshold OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"The maximum number of multicast framesper second

that can be received in the sample interval. The

sample interval is one second. The default value

for this object is zero which implies aninfinite rate."


lpFddiMacBeaconHistory OBJECT-TYPESYNTAX OCTET STRING (SIZE (0..256))ACCESS read-onlySTATUS mandatoryDESCRIPTION

"This object gives a history of the mostrecent beacon

information received on this MAC. It can


37/72

contain up toa maximum of eight records. Each record

is of the form:source MAC:

6 bytesbeacon data length:

2 bytes.beacon data:

0-16 bytes."::= { lpFddiMacEntry 13 }

-- Ethernet Port group

lpEthernetPortTable OBJECT-TYPESYNTAX SEQUENCE OF LpEthernetPortEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of ethernet port entries. A single instance

of this object exists for each ethernetport present

in the system."

::= { lpEthernetPort 1 }

lpEthernetPortEntry OBJECT-TYPESYNTAX LpEthernetPortEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"An ethernet port entry contains information common to a

particular ethernet port within the system."

INDEX { lpEthernetPortIndex }::= { lpEthernetPortTable 1 }

LpEthernetPortEntry ::=SEQUENCE {

lpEthernetPortIndexINTEGER,

lpEthernetPortSlotIndexINTEGER,

lpEthernetPortLocalIndexINTEGER,

lpEthernetPortLabelDisplayString,

lpEthernetPortChipsetTypeINTEGER,

lpEthernetPortLinkStatusINTEGER,

lpEthernetPortByteReceiveRateINTEGER,

lpEthernetPortPeakByteReceiveRateINTEGER,

lpEthernetPortFrameReceiveRateINTEGER,

lpEthernetPortPeakFrameReceiveRateINTEGER,


38/72

lpEthernetPortByteTransmitRateINTEGER,

lpEthernetPortPeakByteTransmitRateINTEGER,

lpEthernetPortFrameTransmitRateINTEGER,

lpEthernetPortPeakFrameTransmitRateINTEGER,

lpEthernetPortReceiveMulticastThresholdINTEGER,

lpEthernetPortTypeINTEGER

}

lpEthernetPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"A unique value for each ethernet port in the system.

The port identified by a particular value of this

index is the same port as identified by

the same value of ifIndex."::= { lpEthernetPortEntry 1 }

lpEthernetPortSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


of this port."::= { lpEthernetPortEntry 2 }

lpEthernetPortLocalIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The index of this port relative to theslot on which it

is physically present."::= { lpEthernetPortEntry 3 }

lpEthernetPortLabel OBJECT-TYPESYNTAX DisplayString (SIZE (0..32))

ACCESS read-writeSTATUS mandatoryDESCRIPTION

"An ASCII text string describing this port."

::= { lpEthernetPortEntry 4 }

lpEthernetPortChipsetType OBJECT-TYPESYNTAX INTEGER {

other(1),


39/72


40/72

lpEthernetPortPeakFrameReceiveRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The peak value of lpEthernetPortFrameReceiveRate for

this port since the system was last initialized."


lpEthernetPortByteTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The average number of bytes transmittedper second by

this port during the most recent sampling period."


lpEthernetPortPeakByteTransmitRate OBJECT-TYPESYNTAX INTEGER


"The peak value of lpEthernetPortByteTransmitRate for

this port since the system was last initialized."


lpEthernetPortFrameTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatory

DESCRIPTION "The average number of frames transmitted per second by

this port during the most recent sampling period."


lpEthernetPortPeakFrameTransmitRate OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The peak value of lpEthernetPortFrameTr

ansmitRate forthis port since the system was last init

ialized."::= { lpEthernetPortEntry 14 }

lpEthernetPortReceiveMulticastThreshold OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION


41/72

"The maximum number of multicast framesper second

that can be received in the sample interval. The

sample interval is four seconds. The default value



lpEthernetPortType OBJECT-TYPESYNTAX INTEGER {

telco10BaseT(1),rj4510BaseT(2),foirl(3),aui(4),other(5)


"Specific description of this port's type."


-- FDDI port group

lpFddiPortTable OBJECT-TYPESYNTAX SEQUENCE OF LpFddiPortEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of FDDI port entries. A single instance of this

object exists for each FDDI port in thesystem."

::= { lpFddiPort 1 }

lpFddiPortEntry OBJECT-TYPESYNTAX LpFddiPortEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A Port entry contains information common to a

particular FDDI port in the system."INDEX { lpFddiPortIndex }::= { lpFddiPortTable 1 }

LpFddiPortEntry ::=SEQUENCE {

lpFddiPortIndexINTEGER,

lpFddiPortSlotIndexINTEGER,

lpFddiPortLocalIndexINTEGER,

lpFddiPortLabelDisplayString


42/72

}

lpFddiPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"A unique value for each FDDI port in the system.

It's value ranges between 1 and the value of

lpSystemFddiPortCount."::= { lpFddiPortEntry 1 }

lpFddiPortSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


of this port."::= { lpFddiPortEntry 2 }

lpFddiPortLocalIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


is physically present."::= { lpFddiPortEntry 3 }

lpFddiPortLabel OBJECT-TYPESYNTAX DisplayString (SIZE (0..32))ACCESS read-write

STATUS mandatoryDESCRIPTION"An ASCII text string describing this po

rt."::= { lpFddiPortEntry 4 }

-- Express Function group

lpExpressTable OBJECT-TYPESYNTAX SEQUENCE OF LpExpressEntryACCESS not-accessibleSTATUS deprecated

DESCRIPTION"A list of Express function entries."

::= { lpExpress 1 }

lpExpressEntry OBJECT-TYPESYNTAX LpExpressEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An Express entry contains information c


43/72

ommon to aparticular Express function in a given s

ystem."INDEX { lpExpressIndex }::= { lpExpressTable 1 }

LpExpressEntry ::=SEQUENCE {

lpExpressIndexINTEGER,

lpExpressSlotIndexINTEGER,

lpExpressLocalIndexINTEGER,

lpExpressAddressThresholdINTEGER

}

lpExpressIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"A unique value for each Express functio

n in the system. It's value ranges between 1 and the value of

lpSystemExpressFunctionCount."::= { lpExpressEntry 1 }

lpExpressSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION


of this function."::= { lpExpressEntry 2 }

lpExpressLocalIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"The index of this function relative tothe slot on which it

is physically present."::= { lpExpressEntry 3 }

lpExpressAddressThreshold OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"A reporting threshold for the total number of Ethernet

Addresses known for this board. When this threshold

is reached, the event lpEemAddressThresh


44/72

oldEvent isgenerated."

::= { lpExpressEntry 4 }

-- Express FDDI Port group

lpExpressFddiPortTable OBJECT-TYPESYNTAX SEQUENCE OF LpExpressFddiPortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of Express FDDI port entries."::= { lpExpressFddiPort 1 }

lpExpressFddiPortEntry OBJECT-TYPESYNTAX LpExpressFddiPortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A Port entry contains information for aparticular

Express FDDI port in a given system."INDEX { lpExpressFddiPortIndex }

::= { lpExpressFddiPortTable 1 }

LpExpressFddiPortEntry ::=SEQUENCE {

lpExpressFddiPortIndexINTEGER,

lpExpressFddiPortSlotIndexINTEGER,

lpExpressFddiPortLocalIndexINTEGER,

lpExpressFddiPortForwardedCtsCounter,

lpExpressFddiPortDroppedCts

Counter}

lpExpressFddiPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION

"A unique value for each Express port inthe system.


lpSystemExpressFddiPortCount."

::= { lpExpressFddiPortEntry 1 }

lpExpressFddiPortSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION


of this port."


45/72

::= { lpExpressFddiPortEntry 2 }

lpExpressFddiPortLocalIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS deprecatedDESCRIPTION


is physically present."::= { lpExpressFddiPortEntry 3 }

lpExpressFddiPortForwardedCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS deprecatedDESCRIPTION

"The number of frames forwarded by thisMAC from

an ethernet port to the FDDI network."::= { lpExpressFddiPortEntry 4 }

lpExpressFddiPortDroppedCts OBJECT-TYPESYNTAX Counter


"The number of frames received by this MAC that

were not forwarded."::= { lpExpressFddiPortEntry 5 }

-- Express Ethernet Port group

lpExpressEthernetPortTable OBJECT-TYPESYNTAX SEQUENCE OF LpExpressEthernetPortEntry

ACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"A list of Express ethernet port entries."

::= { lpExpressEthernetPort 1 }

lpExpressEthernetPortEntry OBJECT-TYPESYNTAX LpExpressEthernetPortEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An Expres ethernet port entry contains

informationcommon to a particular Express ethernet

port locatedin the system."

INDEX { lpExpressEthernetPortIndex }::= { lpExpressEthernetPortTable 1 }

LpExpressEthernetPortEntry ::=SEQUENCE {

lpExpressEthernetPortIndex


46/72


47/72


48/72

DESCRIPTION"A list of Express Remote MAC Address en

tries."::= { lpExpressEthernetPortAddress 1 }

lpExpressEthernetPortAddressEntry OBJECT-TYPESYNTAX LpExpressEthernetPortAddressEntryACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"An entry contains information describing a remote Ethernet

MAC detected to be attached to an Express port."

INDEX { lpExpressEthernetPortAddressPortIndex,lpExpressEthernetPortAddressInde

x }::= { lpExpressEthernetPortAddressTable 1 }

LpExpressEthernetPortAddressEntry ::=SEQUENCE {

lpExpressEthernetPortAddressPortIndexINTEGER,

lpExpressEthernetPortAddressIndex

INTEGER,lpExpressEthernetPortAddressSlotIndexINTEGER,

lpExpressEthernetPortAddressTypeINTEGER,

lpExpressEthernetPortAddressRemoteAddressOCTET STRING,

lpExpressEthernetPortAddressIsStaticINTEGER,

lpExpressEthernetPortAddressStaticPortINTEGER,

lpExpressEthernetPortAddressAgeINTEGER

}

lpExpressEthernetPortAddressPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"A unique value for each Express ethernet port in the

system. It's value ranges between 1 andthe value of

lpSystemExpressEthernetPortCount."::= { lpExpressEthernetPortAddressEntry 1 }

lpExpressEthernetPortAddressIndex OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"The index of this address entry withinthe address table."

::= { lpExpressEthernetPortAddressEntry 2 }


49/72

lpExpressEthernetPortAddressSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION


of this port."::= { lpExpressEthernetPortAddressEntry 3 }

lpExpressEthernetPortAddressType OBJECT-TYPESYNTAX INTEGER {

other(1),invalid(2)



Setting this object to invalid (2) willremove the

corresponding address entry from the table."


lpExpressEthernetPortAddressRemoteAddress OBJECT-TYPESYNTAX OCTET STRING (SIZE (6))ACCESS read-writeSTATUS deprecatedDESCRIPTION

"The remote MAC address detected on thisport."


lpExpressEthernetPortAddressIsStatic OBJECT-TYPESYNTAX INTEGER {

isStatic(1),isDynamic(2)}


"A value indicating whether this MAC address was statically

configured or was dynamically learned onthis port."


lpExpressEthernetPortAddressStaticPort OBJECT-TYPE

SYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"If the object lpExpressEthernetPortAddressIsStatic has

value isStatic(1), this object indicatesthe port for

which this MAC address was statically configured."


50/72


lpExpressEthernetPortAddressAge OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS deprecatedDESCRIPTION

"This object indicates the time, in seconds, elapsed since

this MAC address was added to this port's address table."


-- Power Supply group

lpPowerSupplyTable OBJECT-TYPESYNTAX SEQUENCE OF LpPowerSupplyEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of power supply entries."::= { lpPowerSupply 1 }

lpPowerSupplyEntry OBJECT-TYPESYNTAX LpPowerSupplyEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A power supply entry contains information common for

a particular power supply unit in the system."

INDEX { lpPowerSupplyIndex }::= { lpPowerSupplyTable 1 }

LpPowerSupplyEntry ::=

SEQUENCE {lpPowerSupplyIndexINTEGER,

lpPowerSupplyLocationINTEGER,

lpPowerSupplyStatusINTEGER,

lpPowerSupplyFailureTypeINTEGER,

lpPowerSupplyLastFailureINTEGER

}

lpPowerSupplyIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"A unique value for each power supply inthe system.


lpSystemPowerSupplyCount."


51/72

::= { lpPowerSupplyEntry 1 }

lpPowerSupplyLocation OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The physical slot in which this power supply unit

resides in the system."::= { lpPowerSupplyEntry 2 }

lpPowerSupplyStatus OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The status of the power supply. A valueof 0 indicates

a working unit. A non-zero value represents a bit mask of

the possible failure types. Each set bitindicates the

following failure type:

bit0: systemAcFailurebit1: systemPlus5Failurebit2: systemPlus12Failurebit3: systemOverTemperatureFai

lure."::= { lpPowerSupplyEntry 3 }

lpPowerSupplyFailureType OBJECT-TYPESYNTAX INTEGER {

systemAcFailure(1),systemPlus5Failure(2),systemPlus12Failure(3),systemOverTemperatureFailure(4)

}ACCESS not-accessibleSTATUS deprecatedDESCRIPTION

"This object is sent in the varlist whenthe

lpPowerSupplyFailureEvent trap is generated. It

indicates the particular failure type that caused

this trap to be generated."::= { lpPowerSupplyEntry 4 }

lpPowerSupplyLastFailure OBJECT-TYPESYNTAX INTEGER {

systemAcFailure(1),systemPlus5Failure(2),systemPlus12Failure(3),systemOverTemperatureFailure(4),none(5)

}ACCESS read-onlySTATUS mandatory


52/72

DESCRIPTION"This object represents the most recent

powersupply failure type. If no failure has

occured,the value of this object is none. This

object isincluded in the varlist when the lpPower

SupplyFailureEventtrap is generated. It indicates the fai

lure type thatcaused the trap to be generated."

::= { lpPowerSupplyEntry 5 }

-- Bridge Function Group

lpBridgeTable OBJECT-TYPESYNTAX SEQUENCE OF LpBridgeEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of bridge function entries."::= { lpBridge 1 }

lpBridgeEntry OBJECT-TYPESYNTAX LpBridgeEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A bridge entry contains information common to a

particular bridge function in a given system."

INDEX { lpBridgeIndex }::= { lpBridgeTable 1 }

LpBridgeEntry ::=SEQUENCE {lpBridgeIndex

INTEGER,lpBridgeBaseSlotIndex

INTEGER,lpBridgePortCount

INTEGER,lpBridgeAddressTableSize

INTEGER,lpBridgeAddressThreshold

INTEGER,lpBridgeMode

INTEGER,lpBridgeLocalIndex

INTEGER}

lpBridgeIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


53/72

"A unique value for each bridge functionin the system.


lpSystemBridgeFunctionCount."::= { lpBridgeEntry 1 }

lpBridgeBaseSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The slot number of the lowest numberedslot which

contains a physical port that this bridge function

controls."::= { lpBridgeEntry 2 }

lpBridgePortCount OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of ports that this bridge function controls."::= { lpBridgeEntry 3 }

lpBridgeAddressTableSize OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The size of the address table for thisbridge function."

::= { lpBridgeEntry 4 }

lpBridgeAddressThreshold OBJECT-TYPESYNTAX INTEGERACCESS read-writeSTATUS mandatoryDESCRIPTION

"A reporting threshold for the total number of

addresses known for this board. When this threshold

is reached, the event lpBridgeAddressThresholdEvent is

generated. The range of valid values for setting this

object is between 1 and the value reported by

lpBridgeAddressTableSize + 1 (Note thatthis range

applies to values issued in set requests. The current

value may be outside this range, for example if the value

of lpBridgeMode is changed). Setting this object to one


54/72

greater than the address table size disables the generation

of lpBridgeAddressThresholdEvents sincethe limit will

never be reached."::= { lpBridgeEntry 5 }

lpBridgeMode OBJECT-TYPESYNTAX INTEGER {

expressMode(1),ieee8021dBridgeMode(2),notSupported(3)


"The operational mode of this bridge function. Note that

bridges which report notSupported(3) will not support sets

of this object, and that the value notSupported(3) is not

a valid value for a set operation."::= { lpBridgeEntry 6 }

lpBridgeLocalIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"The index of this bridge function relative to the slot

on which it is physically present."::= { lpBridgeEntry 7 }

-- Bridge Port Table

lpBridgePortTable OBJECT-TYPESYNTAX SEQUENCE OF LpBridgePortEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of bridge port entries."::= { lpBridge 2 }

lpBridgePortEntry OBJECT-TYPESYNTAX LpBridgePortEntryACCESS not-accessibleSTATUS mandatory

DESCRIPTION"A Port entry contains information for a

particularbridge port in a given system."

INDEX { lpBridgePortBridgeIndex, lpBridgePortIndex }::= { lpBridgePortTable 1 }

LpBridgePortEntry ::=SEQUENCE {

lpBridgePortBridgeIndex


55/72

INTEGER,lpBridgePortIndex

INTEGER,lpBridgePortSlotIndex

INTEGER,lpBridgePortLocalIndex

INTEGER,lpBridgePortType

INTEGER,lpBridgePortIpFragmentationEnabled

INTEGER,lpBridgePortReceiveMulticastLimit

INTEGER,lpBridgePortAddressAction

INTEGER,lpBridgePortTotalForwardedCts

Counter,lpBridgePortManagementFramesReceived

Counter,lpBridgePortTotalDiscards

Counter,lpBridgePortReceiveBlockedDiscards

Counter,lpBridgePortReceiveMulticastLimitExceededs

Counter,lpBridgePortReceiveSecurityDiscardsCounter,

lpBridgePortReceiveUnknownDiscardsCounter,

lpBridgePortReceiveOtherDiscardsCounter,

lpBridgePortReceiveErrorDiscardsCounter,

lpBridgePortSameSegmentDiscardsCounter,

lpBridgePortTransmitBlockedDiscardsCounter,

lpBridgePortTotalFilteredCounter,lpBridgePortReceiveUnicastFiltered

Counter,lpBridgePortReceiveMulticastFiltered

Counter,lpBridgePortTransmitUnicastFiltered

Counter,lpBridgePortTransmitMulticastFiltered

Counter,lpBridgePortReceiveMulticastLimitExceededCount

Counter}

lpBridgePortBridgeIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION




56/72

lpSystemBridgeFunctionCount."::= { lpBridgePortEntry 1 }

lpBridgePortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"A unique value for each bridge port controlled by a given

bridge function. It's value ranges between 1 and the

value of lpBridgePortCount for the bridge function

which this entry references."::= { lpBridgePortEntry 2 }

lpBridgePortSlotIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


of this port."::= { lpBridgePortEntry 3 }

lpBridgePortLocalIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


is physically present and its port type. For example

FDDI ports in a slot are identified with

local indices from 1 to the number of FDDI ports in that slot, and the Ethernet

ports in the same slot are identified with local indices from

1 to the number of Ethernet ports in that slot."

::= { lpBridgePortEntry 4 }

lpBridgePortType OBJECT-TYPESYNTAX INTEGER {

ethernet(1),fddi(2),

other(3)}


"The type of this port."::= { lpBridgePortEntry 5 }

lpBridgePortIpFragmentationEnabled OBJECT-TYPESYNTAX INTEGER {


57/72

true(1),false(2),notSupported(3)


"A flag indicating whether or not IP fragmentation is

enabled on this bridge port. Note thatbridges which

report notSupported(3) will not supportsets of this

object, and that the value notSupported(3) is not

a valid value for a set operation."::= { lpBridgePortEntry 6 }

lpBridgePortReceiveMulticastLimit OBJECT-TYPESYNTAX INTEGER (0..65535)ACCESS read-writeSTATUS mandatoryDESCRIPTION

"The maximum number of multicast frames

per second that can be received in the sample interval. The

sample interval is one second. The default value



lpBridgePortAddressAction OBJECT-TYPESYNTAX INTEGER {

other(1),freezeAddress(2),

flushAddress(3),flushDynamicAddress(4)}

ACCESS read-writeSTATUS mandatoryDESCRIPTION




freezeAddress: causes all the l

earned dynamic addresses

to be converted into static addresses.

flushAddress: causes all the addresses to be flushed

from the port's address list.

flushDynamicAddress:


58/72

causes all dynamic addresses to be

flushed from the port's address list."::= { lpBridgePortEntry 8 }

lpBridgePortTotalForwardedCts OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The total number of frames forwarded from this port to

all other ports of this bridge. Note that the total forwarded

count is NOT equal to the receive countminus the discard

count, as a single received multicast/broadcast frame can

be forwarded to multiple bridge ports.Also frames which

are 'flooded' because of unknown destination addresses

account for multiple forwarding as well.

The total forwarding count is the instantaneous sumation of the

'forwarded to' counts to all other portsof the bridge."


lpBridgePortManagementFramesReceived OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of bridge management frames

received by this port."::= { lpBridgePortEntry 10 }

lpBridgePortTotalDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The total number of frames discarded bythis port."


lpBridgePortReceiveBlockedDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of frames discarded by thisport because the

the receiving bridge port was not in the'forwarding'

state."


59/72


lpBridgePortReceiveMulticastLimitExceededs OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of multicast/broadcast frames discarded by

this port because the lpBridgePortReceiveMulticastLimit

was exceeded."::= { lpBridgePortEntry 13 }

lpBridgePortReceiveSecurityDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of frames discarded by thisport because they

contained source addresses which were statically configured

on another bridge port. A statically co

nfigured address (station), which is not allowed to move,appears to have

moved."::= { lpBridgePortEntry 14 }

lpBridgePortReceiveUnknownDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION


destination address was unknown. Note that this counteris only valid for FDDI ports, and only w

hen the bridge is anEEM, or an ESM operating in express mode

."::= { lpBridgePortEntry 15 }

lpBridgePortReceiveOtherDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of frames discarded by thisport because they

contained either invalid (group) sourceaddresses or

source addresses belonging to this bridge (indicative of

network loops)."::= { lpBridgePortEntry 16 }

lpBridgePortReceiveErrorDiscards OBJECT-TYPE


60/72

SYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of frames discarded by thisport because of

internal bridge system errors (e.g., hardware and

software address table discrepencies)."::= { lpBridgePortEntry 17 }

lpBridgePortSameSegmentDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION


destination address is known on the samenetwork segment

as the source address, i.e., the frame does not need to

be bridged."::= { lpBridgePortEntry 18 }

lpBridgePortTransmitBlockedDiscards OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION


the transmitting bridge port was not inthe 'forwarding'

state."::= { lpBridgePortEntry 19 }

lpBridgePortTotalFiltered OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The total number of frames discarded bythis port due to

user defined filters."::= { lpBridgePortEntry 20 }

lpBridgePortReceiveUnicastFiltered OBJECT-TYPESYNTAX CounterACCESS read-only


"The number of frames discarded by thisport due to user

defined receive path filters."::= { lpBridgePortEntry 21 }

lpBridgePortReceiveMulticastFiltered OBJECT-TYPESYNTAX CounterACCESS read-only


61/72



defined receive multicast path filters."::= { lpBridgePortEntry 22 }

lpBridgePortTransmitUnicastFiltered OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION


defined transmit path filters."::= { lpBridgePortEntry 23 }

lpBridgePortTransmitMulticastFiltered OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION


defined transmit multicast path filters."::= { lpBridgePortEntry 24 }

lpBridgePortReceiveMulticastLimitExceededCount OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The number of times the lpBridgePortReceiveMulticastLimit was

exceeded."::= { lpBridgePortEntry 25 }

-- Bridge Port Forwarded-To Table

lpBridgePortForwardedToTable OBJECT-TYPESYNTAX SEQUENCE OF LpBridgePortForwardedToEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of port forwarding count information."

::= { lpBridge 3 }

lpBridgePortForwardedToEntry OBJECT-TYPESYNTAX LpBridgePortForwardedToEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A bridge port forwarded-to entry contains information on the

count of frames forwarded from the receiving port indicated

by the corresponding lpBridgePortForward


62/72

edToReceivePortIndex,to the destination port indicated by the

correspondinglpBridgePortForwardedToDstPortIndex. No

te that no entriesexist which are indexed with the same va

lues for both thelpBridgePortForwardedToReceivePortIndex

and thelpBridgePortForwardedToDstPortIndex obje

cts."INDEX { lpBridgePortForwardedToBridgeIndex,

lpBridgePortForwardedToReceivePortIndex,lpBridgePortForwardedToDstPortIndex }

::= { lpBridgePortForwardedToTable 1 }

LpBridgePortForwardedToEntry ::=SEQUENCE {

lpBridgePortForwardedToBridgeIndexINTEGER,

lpBridgePortForwardedToReceivePortIndexINTEGER,

lpBridgePortForwardedToDstPortIndexINTEGER,

lpBridgePortForwardedToCountCounter}

lpBridgePortForwardedToBridgeIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION



lpSystemBridgeFunctionCount."::= { lpBridgePortForwardedToEntry 1 }

lpBridgePortForwardedToReceivePortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION



value of lpBridgePortCount for the bridg

e functionwhich this entry references. This port

index refers to thereceiving port which is forwarding frame

s."::= { lpBridgePortForwardedToEntry 2 }

lpBridgePortForwardedToDstPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-only


63/72





which this entry references. This portindex refers to

the destination port to which frames arebeing forwarded."

::= { lpBridgePortForwardedToEntry 3 }

lpBridgePortForwardedToCount OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The count of frames forwarded from thereceiving port to

the destination port."::= { lpBridgePortForwardedToEntry 4 }

-- Bridge Port Filtered-To Table

lpBridgePortFilteredToTable OBJECT-TYPESYNTAX SEQUENCE OF LpBridgePortFilteredToEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of port filtering count information."

::= { lpBridge 4 }

lpBridgePortFilteredToEntry OBJECT-TYPE

SYNTAX LpBridgePortFilteredToEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A bridge port filtered-to entry contains information on the

count of frames filtered from the receiving port indicated

by the corresponding lpBridgePortFilteredToReceivePortIndex,

to the destination port indicated by thecorresponding

lpBridgePortFilteredToDstPortIndex. Not

e that no entriesexist which are indexed with the same va

lues for both thelpBridgePortFilteredToReceivePortIndex a

nd thelpBridgePortFilteredToDstPortIndex objec

ts."INDEX { lpBridgePortFilteredToBridgeIndex,

lpBridgePortFilteredToReceivePortIndex,lpBridgePortFilteredToDstPortIndex }


64/72

::= { lpBridgePortFilteredToTable 1 }

LpBridgePortFilteredToEntry ::=SEQUENCE {

lpBridgePortFilteredToBridgeIndexINTEGER,

lpBridgePortFilteredToReceivePortIndexINTEGER,

lpBridgePortFilteredToDstPortIndexINTEGER,

lpBridgePortFilteredToCountCounter

}

lpBridgePortFilteredToBridgeIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION



lpSystemBridgeFunctionCount."

::= { lpBridgePortFilteredToEntry 1 }

lpBridgePortFilteredToReceivePortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION




which this entry references. This portindex refers to thereceiving port which is filtering frames

."::= { lpBridgePortFilteredToEntry 2 }

lpBridgePortFilteredToDstPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION




which this entry references. This portindex refers to

the destination port to which frames arebeing filtered."

::= { lpBridgePortFilteredToEntry 3 }


65/72

lpBridgePortFilteredToCount OBJECT-TYPESYNTAX CounterACCESS read-onlySTATUS mandatoryDESCRIPTION

"The count of frames filtered from the receiving port to

the destination port."::= { lpBridgePortFilteredToEntry 4 }

-- Bridge Port AddressTable

lpBridgePortAddressTable OBJECT-TYPESYNTAX SEQUENCE OF LpBridgePortAddressEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"A list of bridge port address entries."::= { lpBridge 5 }

lpBridgePortAddressEntry OBJECT-TYPESYNTAX LpBridgePortAddressEntryACCESS not-accessible

STATUS mandatoryDESCRIPTION"An bridge port address entry contains i

nformation aboutparticular bridge port address in a give

n system."INDEX { lpBridgePortAddressBridgeIndex,

lpBridgePortAddressPortIndex,lpBridgePortAddressIndex }

::= { lpBridgePortAddressTable 1 }

LpBridgePortAddressEntry ::=SEQUENCE {

lpBridgePortAddressBridgeIndexINTEGER,lpBridgePortAddressPortIndex

INTEGER,lpBridgePortAddressIndex

INTEGER,lpBridgePortAddressRemoteAddress

OCTET STRING,lpBridgePortAddressType

INTEGER,lpBridgePortAddressIsStatic

INTEGER,lpBridgePortAddressStaticPort

INTEGER,lpBridgePortAddressAge

INTEGER}

lpBridgePortAddressBridgeIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION


66/72



lpSystemBridgeFunctionCount."::= { lpBridgePortAddressEntry 1 }

lpBridgePortAddressPortIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION




which this entry references."::= { lpBridgePortAddressEntry 2 }

lpBridgePortAddressIndex OBJECT-TYPESYNTAX INTEGERACCESS read-only

STATUS mandatoryDESCRIPTION"The index of this address entry within

the bridge addresstable."

::= { lpBridgePortAddressEntry 3 }

lpBridgePortAddressRemoteAddress OBJECT-TYPESYNTAX OCTET STRING (SIZE (6))ACCESS read-writeSTATUS mandatoryDESCRIPTION

"The remote MAC address detected on the

port corresponding to this entry. Setting this object attempts to create a

new entry in the table. Since the valueof

lpBridgePortAddressIndex is determined automatically internal

to the bridge, a set is only successfulif the index value

specified for lpBridgePortAddressIndex is zero. A get-next

using the values of lpBridgePortAddressBridgeIndex and

lpBridgePortAddressPortIndex can be usedto determine the

address index assigned to the newly added address entry."

::= { lpBridgePortAddressEntry 4 }

lpBridgePortAddressType OBJECT-TYPESYNTAX INTEGER {

other(1),invalid(2)


67/72


68/72

lpTrapEnterpriseTable OBJECT-TYPESYNTAX SEQUENCE OF LpTrapEnterpriseTableEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"This table contains a listing of enterprises under which

various traps are defined. In all casesexcept for the

MIB-II generic traps, the enterprise under which a trap

is defined is the same as that appearingin the ENTERPRISE

portion of the trap. Associated with each trap enterprise

is a trap enterprise index."::= { lpTrapEnterprise 1 }

lpTrapEnterpriseTableEntry OBJECT-TYPESYNTAX LpTrapEnterpriseTableEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"Information relating a specific trap en

terprise OID with a trap enterprise index."INDEX { lpTrapEnterpriseIndex }::= { lpTrapEnterpriseTable 1 }

LpTrapEnterpriseTableEntry ::=SEQUENCE {

lpTrapEnterpriseIndexINTEGER,

lpTrapEnterpriseOIDOBJECT IDENTIFIER

}

lpTrapEnterpriseIndex OBJECT-TYPESYNTAX INTEGERACCESS read-onlySTATUS mandatoryDESCRIPTION

"A unique index corresponding to a particular enterprise

OID under which traps are defined. Thisvalue of this

object corresponding to a particular enterprise OID will

remain constant accross system resets."::= { lpTrapEnterpriseTableEntry 1 }

lpTrapEnterpriseOID OBJECT-TYPESYNTAX OBJECT IDENTIFIERACCESS read-onlySTATUS mandatoryDESCRIPTION

"An enterpise OID under which traps aredefined."

::= { lpTrapEnterpriseTableEntry 2 }


69/72

-- Trap Destination Table

lpTrapDestTable OBJECT-TYPESYNTAX SEQUENCE OF LpTrapDestTableEntryACCESS not-accessibleSTATUS mandatoryDESCRIPTION

"This table contains information specifying which traps

will be transmitted by the LANplex to agiven destination

address. The table is indexed by the destination address,

the index of the enterprise which generates the trap, and

the trap number. Each entry in the table with a status

3com-lanplex

Documents