Top Banner
Technical Data Measurement capability 1000 A ac and dc current measurement with fixed jaw 2500 A ac current measure- ment with iFlexflexible current probe 1000 V ac and dc voltage measurement True-RMS ac voltage and current for accurate measure- ments on non-linear signals Frequency measurement to 500 Hz with both jaw and iFlex 60 kΩ resistance mea- sure-ment with continuity detection Min, max, average and inrush recording to capture varia- tions automatically 500 mV dc measurement range to interface with other accessories 1000 µF capacitance measurement Features iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access CAT IV 600 V, CAT III 1000 V safety rating Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environ- ments while providing stable readings Work horse clamps with increased performance and flexibility 376 True-RMS AC/DC Clamp Meter with iFlex The new Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With True-RMS ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes. Additionally, the Fluke 376 includes the new iFlex flexible current probe expanding the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward sized conductors and improved wire access. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter. New
2

376 True-rms AC/DCClamp Meter with iFlex Datasheet · 2015. 11. 17. · Clamp Meter with iFlex ™ The new Fluke 376 Clamp Meter offers improved performance perfect for a wide range

Jan 30, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • Technical Data

    Measurement capability• 1000Aacanddccurrent

    measurementwithfixedjaw• 2500Aaccurrentmeasure-

    mentwithiFlex™flexiblecurrentprobe

    • 1000Vacanddcvoltagemeasurement

    • True-RMSacvoltageandcurrentforaccuratemeasure-mentsonnon-linearsignals

    • Frequencymeasurementto500HzwithbothjawandiFlex™

    • 60kΩresistancemea-sure-mentwithcontinuitydetection

    • Min,max,averageandinrushrecordingtocapturevaria-tionsautomatically

    • 500mVdcmeasurementrangetointerfacewithotheraccessories

    • 1000µFcapacitancemeasurement

    Features• iFlex™flexiblecurrentprobe

    expandsthemeasurementrangeto2500Aacwhileprovidingincreaseddisplayflexibility,abilitytomeasureawkwardsizedconductorsandimprovedwireaccess

    • CATIV600V,CATIII1000Vsafetyrating

    • Integratedlowpassfilterandstateoftheartsignalprocessingallowsforuseinnoisyelectricalenviron-mentswhileprovidingstablereadings

    Work horse clamps with increased performance and flexibility

    376 True-RMS AC/DC Clamp Meter with iFlex™

    The new Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With True-RMS ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes. Additionally, the Fluke 376 includes the new iFlex™ flexible current probe expanding the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward sized conductors and improved wire access. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

    New

  • • Proprietaryinrushmeasure-menttechnologytofilteroutnoiseandcapturemotorstartingcurrentexactlyasthecircuitprotectionseesit

    • Ergonomicdesignfitsinyourhandandcanbeusedwhilewearingpersonalprotectiveequipment

    • Large,easytoread,backlightdisplayautomaticallysetsthecorrectmeasurementrangesoyoudonotneedtochangeswitchpositionswhiletakingameasurement

    • Three-yearwarranty• Softcarryingcase

    SpecificationsFluke 376 Range Resolution Accuracy

    AC current via jaw 999.9A 0.1A 2%±5digits

    AC current via iFlex™ 2500A 0.1A 3%±5digits

    DC current 999.9A 0.1A 2%±5digits

    AC voltage 1000V 0.1V 1.5%±5digits

    DC voltage 1000V 0.1mV 1%±5digits

    Resistance 60,000Ω 0.1Ω 1%±5digits

    Frequency 500Hz 0.1Hz 0.5%±5digits

    Capacitance 1000µF 1µF 1%±4digits

    True-RMS •

    Continuity •

    Hold •

    Backlight •

    Min/Max/Avg •

    Inrush •

    Low pass filter •

    45 cm (18 inch) iFlex Flexible™ Current Probe Included

    25 cm (10 inch) iFlex Flexible™ Current Probe Accessory

    Wire capacity 34mm

    Safety rating CATIII1000V,CATIV600V

    Ordering informationFluke 376 True-RMSAC/DCClampMeterwithiFlex™

    IncludedClampmeter,45cm(18-inch)iFlex™probe,testleads,softcase,usersmanual

    Models Feature ChangesOldmodel:Fluke337New model: Fluke 376 Includesall337featuresplus:

    •CATIV600V,CATIII1000V•iFlex™2500Aac•1000Vac/dc

    •mVdc•60kΩ•1000µF

    Oldmodel:Fluke336New model: Fluke 375 Includesall336featuresplus:

    •CATIV600V,CATIII1000V•OptionaliFlex™2500Aac•mVdc

    •60kΩ•1000µF•Min/Max/Avg

    New model: Fluke 374 Includesall336features(exceptlowpassfilter)plus:•CATIV600V,CATIII1000V

    •OptionaliFlex™2500Aac•1000µF•Min/Max/Avg

    Oldmodel:Fluke335New model: Fluke 374 Includesall335featuresplus:

    •CATIV600V,CATIII1000V•OptionaliFlex™2500Aac

    •600Aac/dc•1000µF•Min/Max/Avg

    New model: Fluke 373 Includesall335features(exceptinrush)plus:

    •CATIV300V,CATIII600V•1000µF

    Oldmodel:Fluke334New model: Fluke 374 Includesall334featuresplus:

    •CATIV600V,CATIII1000V•OptionaliFlex™2500Aac•True-RMS

    •600Aac/dc•1000µF•Min/Max/Avg

    New model: Fluke 373 Includesall334features(exceptinrush)plus:•CATIV300V,CATIII600V

    •True-RMS•1000µF

    Oldmodel:Fluke333New model: Fluke 373 Includesall333featuresplus:

    •CATIV300V,CATIII600V•True-RMS

    •600Aac•6000Ω•1000µF

    Fluke Europe B.V.P.O.Box11865602BDEindhovenTheNetherlandsWeb:www.fluke.eu

    For more information call:InEurope/M-East/Africa+31(0)402675200orFax+31(0)402675222

    Fluke (UK) Ltd.52HurricaneWayNorwich,NorfolkNR66JBUnitedKingdom

    Tel.:(020)79420700Fax:(020)79420701E-mail:[email protected]:www.fluke.co.uk/clamps

    ©2010FlukeCorporation.Specificationssubjecttochangewithoutnotice.Pub_ID:11673-eng

    Modification of this document is not permitted without written permission from Fluke Corporation.

    Fluke. Keeping your world up and running.®