3
Things will go uphill!
Trommelberg is your best partner in supplying body repair and garage equipment.
Trommelberg is the perfect solution for your business.
• Diverse and constantly updated product range• 20 manufacturing plants• Continuous supervision throughout all stages of production• R&D investment• Flexible pricing policy • Quick logistics• Equipment installation services• Maintenance and technical support• Training center
All products are internationally certified and meet the highest technical standards set by leading manufacturers.
This catalogue offers a comprehensive list of Trommelberg products for professional body repair and garage jobs.
To stay updated with new products and special events, please visit our website www.trommelberg.com
4
Things will go uphill!
Contents
LIFTS
two-post lifts 6four-post lifts 8
scissor lifts 10
JACKS, GARAGE CRANES, STANDS
trolley jacks 12transmission jacks 15
engine cranes 17
engine stands 18
engine supports 19
presses 21
EXHAUST EXTRACTION EQUIPMENT
hose reels 25centrifugal fans 25
WHEEL SERVICE EQUIPMENT
car tire changers 26pneumatic assist devices 31
options for car tire changers 32
car wheel balancers 35
options for car wheel balancers 38
truck tire changer 40
truck wheel balancer 41
5
Things will go uphill!
VEHICLE SYSTEM SERVICE EQUIPMENT
oil drainers and extractors 42
BAKING AND PAINT SPRAYING EQUIPMENT
infrared dryers 47preparation area 49
spray booth 50
BODY REPAIR EQUIPMENT
platform benches 52frame benches 54
The manufacturer reserves its right to change specifications of the equipment represented in this catalogue without notice.
6
Things will go uphill!
Lifting/lowering time 22 / 50 s
min. height 110 mm
Distance between columns 2800 mm
Motor power 2.2 kW
4 TON TWO POST LIFT with upper synchronization
Model No.: TST40G
Electro-hydraulic lift for vehicles up to 4 tons. Equipped with CE certified safety system.• Asymmetric lifting arms provide free access to vehicle doors• Upper synchronization: 2 hydraulic cylinders + 2 pulling cables • Safe and reliable electromagnet release • Lowering without the use of the hydraulic unit• Manual lock release of emergency lowering valve• Reinforced lifting carriages to prevent deformation • 24 V push button control box• Crash-proof rubber pads provide vehicle door protection• Slide blocks made of temperature-resistant, high-strength nylon • Double safety system: the vehicle is kept at the required height by hydraulic pressure and automatic locking ratchets• Convenient threaded supports with rubber pads • Base plates made of 6 mm sheet steel• Required foundation depth: max. 150 mm• Durable powder coating
4 Ton
Technical Data:Сapacity 4000 kg
Lifting height 1850 mm
Overall width 3426 mm
Overall height 3605 mm
Power supply 3 PH x 400 V / 50 Hz
Net weight 603 kg
Options:see “Options for car lift” on page 9
7
Things will go uphill!
Lifting/lowering time 25 / 55 s
Min. height 90 mm
Distance between columns
2780 mm
Motor power 2.2 kW
4 TON TWO POST LIFT with lower synchronization
Model No.: TST40E
Electro-hydraulic lift for vehicles up to 4 tons. Equipped with CE certified safety system.• Asymmetric lifting arms provide free access to vehicle doors• Lower synchronization: 2 hydraulic cylinders + 2 pulling cables + 2 synchronization cables • Safe and reliable electromagnet release • Lowering without the use of the hydraulic unit• Manual lock release of emergency lowering valve• Reinforced lifting carriages to prevent deformation • 24 V push button control box• Crash-proof rubber pads provide vehicle door protection• Slide blocks are made of temperature-resistant, high-strength nylon • Double safety system: the vehicle is kept at the required height by hydraulic pressure and automatic locking ratchets• Convenient threaded supports with rubber pads • Base plates are made of 5 mm sheet steel• Required foundation depth: max. 150 mm• Durable powder coating
4 Ton
Technical Data:Capacity 4000 kg
Max. lifting height 1930 mm
Overall width 3365 mm
Column height 2824 mm
Power supply 3 PH x 400 V / 50 Hz1 PH x 230 V / 50 Hz
Net weight 570 kg
8
Things will go uphill!
Motor power 2.2 kW
Power supply 3 PH х 400 V / 50 Hz
Net weight 1200 kg
Axle Jack
Max. capacity 2000 kg
Max. lifting height 515 mm
Working air pressure 8 barDistance between pick-up points
880–1130 mm
4 TON FOUR POST LIFTfor wheel alignment
Model No.: ТSТ440A
Electro-hydraulic lift for cars, minivans and light trucks. Due to special equipment it is possible to carry out wheel alignment, wheel mounting/demounting and adjustment of brake and steering wheel systems.
• Pneumatic hydraulic axial wheel free lift• Rear slip plates and recess in platforms for wheel alignment• Pneumatic unlocking system with central control• Lift lowering without power supply• Easy-to-use control• Ramps are fitted directly to the lift, so it is not necessary to position them every time the vehicle is being moved
4 Ton
Technical Data:
Main Lift
Capacity 4000 kg
Lifting height 1800 mmOverall length (with ramps)
6130 mm
Overall width 3470 mm
Lifting/lowering time 50 / 50 s
Length of platforms 5080 mm
Width of platforms 500 mm
Standard Shipment:• Pneumatic hydraulic axle jack • 2 racks with recess for front turntables• 2 rear slip plates• 2 drive-in ramps• 2 locking devices to prevent the vehicle from
rolling down
Options:see “Options for car lift” on page 9
9
Things will go uphill!
Technical Data:
Max. capacity 2.0 T
Max. lifting hight 520 mm
Distance between lifting points 880–1370 mm
Working air pressure 8 bar
Oil quantity 1 L
Technical Data:
Max. capacity 1 T
Dimensions 400 x 400 x 50 mm
OpTiOns FOR liFTs
Extension Kit for TsT40GModel No.: 40G.EP
Kit for post height extension by 400 mm for TsT40G 2-post lift. includes 400 mm extensions, cables and hoses.
2.0 Тon Rolling JackModel No.: TXBJ2000P
pneumatic hydraulic rolling jack for 4-post lifts or pits.
1.0 Ton TurntableModel No.: TT-004
Turntable with angle scale and locking pins. Designed for mounting on Trommelberg 4-post lifts or pits. Used for wheel alignment of cars and light commercial vehicles.
10
Things will go uphill!
Total lift length with extensions
2050 mm
Total platform width 2020 mm
Motor power 2.2 kW
Power supply 3 PH x 400 V / 50–60 Hz
3 TON DOUBLE SCISSOR LIFTlow profile
Model No.: TXB30Y
perfectly suitable for tire mounting/dismounting and chassis maintenance.• Double scissors lift, pick up points under body sills, extendable platforms• Low profile platforms (105 mm height), takes up minimum space• External hydraulic unit with control panel• Hydraulic synchronization of platforms• Pneumatic safety lock is automatically engaged after pressing the up/down button• Return valve prevents the platforms from accidental falling in case of broken hydraulic hose, for the safety of operator and vehicle• Weldless solid platform ensures reliability and durability• Low voltage controls conform to CE standards
3 Ton
Technical Data:Lifting capacity 3000 kg
Lifting height 1850 mm
Lifting/lowering time 55 / 55 s
Min. hight 105 mm
Platform length without extensions
1450 mm
Platform width 635 mm
Standard Shipment:• 2 Double scissor lift units • 1 External control panel • Accessories for the connection of scissors
and control panel• Set of 4 rubber blocks
11
Things will go uphill!
Platform width 480 mm
Total lift length with extensions
2050 mm
Total platform width 1810 mm
Motor power 2.2 kW
Power supply 3 PH x 400 V / 50 Hz 1 PH x 230 V / 50 Hz
3 TON SCISSOR LIFTincluding mobile kit
Model No.: TXB30LS
The TXB30ls scissor lift with included mobile kit is ideal for car body repair and tire service bays. Because of its compact measurements and the mobile kit the TXB30ls is a real space saver.
• Electro-hydraulic scissor lift• Powerful electronic• Solid designed platforms• Hydraulic synchronization of platforms• Auto locking mechanism and emergency stop
3 Ton
Technical Data:Lifting capacity 3000 kg
Lifting height 960 mm
Lifting/lowering time
30 / 30 sec
Min. hight 105 mm
Platform length without extensions
1460 mm
Standard Shipment:• 1 Scissor lift • 1 Mobile external control panel• Accessories for the connection of
scissors and control panel• Set of 4 rubber blocks
12
Things will go uphill!
Max. lifting height 435 mm
Gross weight 31.9 kg
2.5 TON TROLLEY JACKhydraulic
Model No.: XRD0902
Hydraulic trolley jack.• The load is lowered by turning the handle• Simple, reliable and sturdy design• High-precision load positioning control by means of the handle• Extra seal kit for replacement in standard shipment• Breather plug bleeds air from the hydraulic system
Technical Data:Lifting capacity 2.5 T
Min. pick-up height 100 mm
2.5 Ton
13
Things will go uphill!
Max. lifting height 522 mm
Gross weight 46 kg
3.5 TON TROLLEY JACKhydraulic
Model No.: XRD0335
Hydraulic trolley jack.• Fast jacking up due to two-way hydraulic pump • Low pick up height• Strengthened design• One handle for jacking up and down• Lowering valve drive with universal joint• The handle is equipped with soft protective cover preventing accidental damaging of a car body• Overload relief valve• Swivel castors ensure high maneuvering ability• Extra seal kit for replacement
Technical Data:Lifting capacity 3.5 T
Min. pick-up height 95 mm
3.5 Ton
14
Things will go uphill!
Max. lifting height 450 mm
Operating air pressure 7.5–8.5 bar
22 TON TROLLEY JACKair hydraulic
Model No.: SD101902
single-stage air hydraulic trolley jack for car and truck maintenance.• Compact jack intended for use in hard-to-reach areas, e.g. between doubled truck wheels• The saddle height is controlled by a hardened steel screw (H=105 mm)• Hardened and chrome-plated rod of hydraulic cylinder increases mechanical resistance of the jack• Built-in safety valve for overload protection• Handle with control mechanism and inlet connector for compressed air
Technical Data:Lifting capacity 22 T
Min. height 226 mm
22 Ton
Screw height 105 mm
Gross weight 36.5 kg
15
Things will go uphill!
Max. lifting height 1900 mm
Base dimensions 570 x 570 mm
22 TON TROLLEY JACKair hydraulic
Model No.: SD101902
TRANSMISSION JACKwith saddle
Model No.: C10102A
Movable transmission jack with saddle.• Equipped with a saddle for gearbox replacement• Hydraulic pump with foot drive• Spring-loaded release valve reduces the risk of uncontrolled lowering of the jack table• Swivel castors ensure high mobility of the jack
Technical Data:Lifting capacity 500 kg
Min. height 1100 mm
500 kg
Gross weight 30.5 kg
16
Things will go uphill!
Max. lifting height 1795 mm
Rod stroke 1-st / 2-nd stage 480 / 465 mm
TRANSMISSION JACK with table
Model No.: SD100302
Movable transmission jack with table.• Table equipped with chains for gear box replacement• Hydraulic pump with foot drive• Spring-loaded release valve reduces the risk of uncontrolled lowering of the jack table• Swivel castors ensure high mobility of the jack• Double telescopic rod
Technical Data:Lifting capacity 500 kg
Min. height 850 mm
500 kg
Table size 360 x 305 mm
Gross weight 64 kg
17
Things will go uphill!
Lifting height 0–2380 mm
Gross weight 90 kg
FOLDING ENGINE CRANEModel No.: C10601B
• Hand hydraulic pump• Equipped with long hydraulic cylinder to ensure high-speed and safe lift operation• Six wheels for mobility• Built-in emergency valve protects the device and personnel from the risk of overloading• Folding design enables the crane to be stored even in confined areas
Technical Data:Lifting capacity 2 T
Boom length 920–1430 mm
2 Ton
OpTiOns
Model No.: C103214
Chain balancer with hooks for balancing of load suspended at two points during crane lift.
18
Things will go uphill!
Gross weight 28 kg
UNIVERSAL ENGINE STANDModel No.: C10601-3
stand for rotating engines and gearboxes, equipped with rotation block and universal fixture.
• Rotation and positioning: 360°• Compact design of support enables close positioning to the vehicle’s engine compartment• Made of high-strength welding elements with quadrate cross-section for higher reliability
Technical Data:Lifting capacity 600 kg
Working height 820 mm
600 kg
19
Things will go uphill!
Leg width 230 mm
Height adjustment 300 mm
UNIVERSAL ENGINE SUPPORT Model No.: С103612
• Designed for the removal/installation of engines, gear boxes and transmissions• Movable supports with rubber protectors for installation on a vehicle• Adjustable chain height
Technical Data:Lifting capacity 500 kg
Beam length 1490 mm
500 kg
Chain length 700 mm
Gross weight 14 kg
20
Things will go uphill!
Lower bracket stroke 210–570 mm
Gross weight 40 kg
SPRING COMPRESSORModel No.: С10301C
stationary hydraulic shock absorber spring compressor.• Height adjustable top bracket • Bracket design ensures shock absorber protection during work• Height adjustable lower sliding bracket• Foot driven hydraulic pump ensures smooth and safe work
Technical Data:Max. spring diameter 400 mm
Max. spring compression load 900 kg
21
Things will go uphill!
Work space 0–955 mm
Table width 550 mm
20 TON FLOOR PRESShand driven
Model No.: SD0805С
Technical Data:Max. capacity 20 T
Piston rod stroke 185 mm
20 Ton
Number of table positions 8
Gross weight 85 kg
Floor press with hand hydraulic drive.• Designed for mounting/demounting toothed wheels, universal joints, pulleys, piston pins as well as for bending, straightening and joining
parts• Durable return spring ensures quick return of the piston to its initial position• Adjustable height of the table• Pressure gauge to show the applied pressure
22
Things will go uphill!
Work space 0–955 mm
Table width 550 mm
Number of table positions 8
20 TON FLOOR PRESSair / hand driven
Model No.: SD0805CP
Floor press with air / hand hydraulic drive.• Designed for mounting/demounting toothed wheels, universal joints, pulleys, piston pins as well as for bending, straightening and joining
parts• Durable return spring ensures quick return of the piston to its initial position• Adjustable height of the table• Pressure gauge to show the applied pressure
Technical Data:Max. capacity 20 T
Piston rod stroke 185 mm
Operating air pressure 6–10 bar
Gross weight 85 kg
20 Ton
23
Things will go uphill!
Work space 151–1031 mm
Table width 535 mm
30 TON FLOOR PRESShand driven
Model No.: SD0901D
Technical Data:Max. capacity 30 T
Piston rod stroke 150 mm
Number of table positions 9
Gross weight 167 kg
30 Ton
Floor press with hand driven hydraulic pump and pressure gauge.• Designed for mounting/demounting toothed wheels, universal joints, pulleys, piston pins and for bending, straightening and joining
different parts• Durable return spring ensures quick return of the piston to its initial position• Adjustable height of the table• Pressure gauge to show the applied pressure
24
Things will go uphill!
Work space 68–1048 mm
Table width 730 mm
50 TON FLOOR PRESSwith winch
Model No.: SD0901H
Floor press with hand driven hydraulic pump and pressure gauge.• Designed for mounting/demounting toothed wheels, universal joints, pulleys, piston pins and for bending, straightening and joining
different parts• Two-speed drive ensures fast rod movement towards the surface of a treated part• Manual winch makes the table height positioning easier• Durable return spring ensures quick return of the piston to its initial position• Pressure gauge to show the applied pressure
Technical Data:Max. capacity 50 T
Piston rod stroke 200 mm
Number of table positions 7
Gross weight 298 kg
50 Ton
25
Things will go uphill!
MFS-3.2
Capacity 3200 m3/h
Power supply 3 PH х 400 V / 50 Hz
Total power 2.2 kW
Inlet/outlet section 160 mm
Gross weight 36 kg
HR70-08/102
Reel length 900 mm
Reel height (with mounting bracket)
750–830 mm
Hose length 8 m
∅ Hose inner diameter 102 mm
∅ Nozzle diameter 140 mm
∅ exhaust system connection 160 mm
Weight (including hose and nozzle)
40–50 kg
Electric fans designed for exhaust extraction. They are made of aluminium alloy and fitted with inlet and outlet flanges. The fans are actuated by three-phase spark-proof electric motors.
• HR series hose reels for car exhaust extraction• The reels are made of aluminium alloy-covered steel sheets and coated fiberglass plastic panels• The reels are mounted directly to a centrifugal electric exhaust fan (option)• Depending on the model, the reels may be equipped with a mechanical hose return spring or an electromechanical motor drive for remotely-
controlled winding and unwinding of the hose• The scope of supply also includes a hose, a rubber gas nozzle with a handle, a stopper and a wall / ceiling mounting bracket. • The reel with an electromechanical motor drive is also supplied with a wireless remote control• The hoses are made of thermoplastic elastomer (TPE)
Technical Data:MFS-2.8
Capacity 2800 m3/h
Power supply 3 PH х 400 V / 50 Hz
Total power 1.5 kW
Inlet/outlet section 160 mm
Gross weight 33 kg
Technical Data:HR70-08/76
Reel length 720 mm
Reel height (with mounting bracket)
750–830 mm
Hose length 8 m
∅ Hose inner diameter 76 mm
∅ Nozzle diameter 140 mm
∅ exhaust system connection 160 mm
Weight (including hose and nozzle)
40–50 kg
HR70-08/102EH
Reel length 1155 mm
Reel height (with mounting bracket)
750–830 mm
Hose length 8 m
∅ Hose inner diameter 102 mm
∅ Nozzle diameter 140 mm
∅ exhaust system connection 160 mm
Weight (including hose and nozzle)
40–50 kg
EXHAUST HOSE REELS
Model No.: HR70-08/76 Mechanical exhaust hose reel with 8 m hose (hose ∅76 mm)
Model No.: HR70-08/102
Mechanical exhaust hose reel with 8 m hose (hose ∅102 mm)
Model No.: HR70-08/102EH Electromechanical exhaust hose reel with 8 m hose (hose ∅102 mm)
CENTRIFUGAL FANSModel No.: MFS
26
Things will go uphill!
Bead breaking force 1000 kg
Max inflation pressure 3.5 bar
Operating hydraulic pressure
80–120 bar
Total power 1.5 kW
Power supply 3 PH x 400 V / 50 / 60 Hz
Working place 2600 x 1600 mm
CAR TIRE CHANGERautomatic
Model No.: 1895IT
The machine for professionals. For all wheel – tire combinations.• Hydraulic wheel mounting head for remote mounting/dismounting of tires• Fixation of wheel through middle hole on different cones• Bead breaking of tire wall on both sides without turning the tires• Lift for lifting and positioning the tire on shaft• Oil lubrication of the entire machine• Main shaft has three settings for different thickness of the tire• Main shaft offers 2 working speeds• Joystick operation on the control panel• Fully automatic tool head, pneumatic driven• Camera monitoring of processes at the bottom of the tire• Special pressure limit valve• Wide range of standard accessories
Technical Data:Rim diameter 10"–30"
Max. wheel diameter 1300 mm
Wheel width 3"–13"
Main shaft rotation speed
• speed 1-st (rev/min) 6.5
• speed 2-nd (rev/min) 13
Operating air pressure 7–8 bar
Standard Shipment:• Tire Changer complete with control unit,
tool head, shaft, camera• Cones 1 to 5, caps for cone 3 and 4,
locking fingers short and long, tire levers, brush
• Container for bead lubricant, manual
27
Things will go uphill!
Working air pressure 8–10 bar
Motor power 0.75 kW
Power supply 3 PH x 400 V – 50 / 60 Hz
Gross weight 285 kg
Options:see “Options for car tire changers” on page 32
CAR TIRE CHANGERwith “jet-blast” inflation system
Model No.: 1887IT 3P (3 Phase)
Technical Data:Rim diameter
• inside clamping 15"–28"
• outside clamping 13"–24"
Max. wheel diameter 1120 mm
Wheel width 3"–13"
Turntable Speed 1 / Speed 2 (for 3 PH version)
Automatic tire changer with “jet-blast” rapid inflation function and tilting tower.• Ideal solution for tire shops with nigh volume• Special version for large diameter wheels• “Jet-blast” rapid inflation system for tubeless tires: air is pumped into the tire through nozzles in each jaw• Tilting tower• Rubber protection on bead breaking device to avoid damage to tires and rims• Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim• Pedal-controlled inflation• Pressure gauge fitted on a tilting tower
Standard Shipment:• T.I. system air receiver• Bead breaker blade• Tower pole accessory shelf• Filter - lubricator• Integrated manometer• Kit of plastic protectors for jaws• Mounting lever• Grease box
28
Things will go uphill!
Working air pressure 8–10 bar
Motor power 1 PH 1.1 kW / 3 PH 0.75 kW
Power supply 1 PH x 230 V – 50 / 60 Hz
3 PH x 400 V – 50 / 60 Hz
Gross weight 263 kg
CAR TIRE CHANGERwith tilting tower
Model No.: 1885 (1 Phase)
1885 3P (3 Phase)
Automatic tire changer with tilting tower.• Suitable for 11”–23” steel rims and up to 20” aluminum alloy rims• Tilt back post• Self-centring four-jaw turntable • Rubber protection on bead breaking device to avoid damage to tires and rims • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim • Pedal-controlled inflation • Pressure gauge fitted on a tilt back post
Technical Data:Rim diameter
• inside clamping 13"–23"
• outside clamping 11"–20"
Max. wheel diameter 1040 mm
Wheel width 3"–15"
Turntable Speed 1 / Speed 2 (for 3 PH version)
Standard Shipment:• Mounting lever• Bead breaker blade• Tower pole accessory shelf• Filter–lubricator• Integrated control manometer• Kit of plastic protectors for jaws• Grease box
Options:see “Options for car tire changers” on page 32
29
Things will go uphill!
Working air pressure 8–10 bar
Bead breaking force 2500 kg
Motor power 1 PH 1.1 kW / 3 PH 0.75 kW
Power supply 1 PH x 230 V – 50 / 60 Hz3 PH x 400 V – 50 / 60 Hz
Net weight 235 kg
CAR TIRE CHANGERsemi-automatic
Model No.: 1860 (1 Phase)
1860 3P (3 Phase)
Technical Data:Rim diameter
• inside clamping 15"–28"
• outside clamping (standard)
13"–24"
• outside clamping (with A24)
15"–30"
Max. wheel diameter 1250 mm
Wheel width 3"–15"
Turntable Speed 1 / Speed 2 (for 3 PH version)
semi-automatic tire changing machine with multiple expansion options for even better handling and enhanced scope of use.
• Two-speed turntable (for version with 3PH power supply only)• Jet blast inflation system IT1860 (optional) for tubeless tires: fast and convenient tire inflation, due to the presence of the receiver and the
unit for direct air supply into the tire• Swivel horizontal arm• Slide vertical arm• Tool box under the column• Inflation gun with manometer
Standard Shipment:• Bead breaker blade• Filter-lubricator• Inflation gun with manometer• Set of plastic protectors for jaws• Tool box under the column• Mounting lever• Grease box
Options:see “Options for car tire changers” on page 32
30
Things will go uphill!
CAR TIRE CHANGERsemi-automatic
Model No.: 1850B (1 Phase)
1850 3P (3 Phase)
Working air pressure 8–10 bar
Motor power 1 PH 1.1 kW / 3 PH 0.75 kW
Power supply 1 PH x 230 V – 50 / 60 Hz /
3 PH x 400 V – 50 / 60 Hz
Net weight 200 kg
semi-automatic tire changer with rotation arm for steel and aluminium alloy rims.• Suitable for 13”–23” steel rims and up to 20” aluminium alloy rims• Self-centring four-jaw turntable• Rubber protection on a bead breaking device to avoid damage to tires and rims• Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim• Ergonomic arrangement of control pedals
Technical Data:Rim diameter
• inside clamping 13"–23"
• outside clamping 11"–20"
Max. wheel diameter 960 mm
Wheel width 3"–12"
Turntable Speed 1 / Speed 2 (for 3 PH version)
Standard Shipment:• Bead breaker blade• Filter–lubricator• Tool box under the column• Inflation gun with manometer• Set of plastic protectors for jaws• Mounting lever• Grease box
Options:see “Options for car tire changers” on page 32
31
Things will go uphill!
PNEUMATIC ASSIST DEVICEleft side mounting
Model No.: PL1330
PNEUMATIC ASSIST DEVICEright side mounting
Model No.: PL1335
Operating air pressure 6–10 bar
Height (if mounted on 1885) 2190 mm
Operating air pressure 6–10 bar
Height (if mounted on 1885) 2190 mm
Technical Data:Max. wheel diameter 1040 mm
Wheel width 3"–16"
Technical Data:Max. wheel diameter 1040 mm
Wheel width 3"–16"
Net weight 90 kg
Net weight 95 kg
Multifunctional device for 1887iT, 1860 and 1885 tire changers. Designed for mounting / dismounting of low-profile, wide and rigid tires. A pressing roller with pneumatic drive can be positioned above the mounting head and hold the tire bead in and desired position.
Multifunctional device for Trommelberg tire changer 1887iT and 1885 with tilting tower. Designed for mounting / dismounting of low-profile, wide and rigid tires.
32
Things will go uphill!
OpTiOns FOR CAR TiRE CHAnGERs
plastic protector for JawModel No.: A3
plastic protectors for clamping jaws to prevent damage of aluminium rims during tire changing works (1 set – 4pcs.).
Suitable for Trommelberg tire changers 1887IT, 1885, 1860, and 1850B.
Motorcycle Clamp Adapter setModel No.: A7
set of 4 adapters for clamping jaws of Trommelberg tire changers.
Designed for mounting and dismounting of motorcycle and scooter tires.Suitable for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.
Motorcycle Tire Demounting HeadModel No.: A8
Designed for motorcycle and scooter tires.
Suitable for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.
plastic Demounting HeadModel No.: LC-T.02.00
Heavy duty plastic mounting head for careful mounting / demounting of wheels with aluminum rims.
Suitable for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.
33
Things will go uphill!
OpTiOns FOR CAR TiRE CHAnGERs
Demount Head Quick Change ToolModel No.: TC1745
The tool enhances work efficiency by the quick changing of the different demounting heads: standard demounting head, plastic demounting head (art. lC-T.02.00) or motorcycle demounting head (art. A8).
Suitable for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.
Bead Breaker plastic CoverModel No.: A9
Bead breaker plastic cover prevents rim surface damage during tire changing works.
Suitable for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.
Bead ClampModel No.: A10
Bead clamp for low-profile tires.
plastic protectors for Mounting HeadModel No.: A11
protective plastic and slide rail for the mounting head.
• Prevents direct contact of the mounting / dismounting head to the rim• Protects the rim during tire mounting / dismounting process• Especially recommended for aluminum wheels
Suitable for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.
34
Things will go uphill!
OpTiOns FOR CAR TiRE CHAnGERs
Tire lever plastic CoverModel No.: A12
Tire lever plastic cover prevents rim surface damage during tire changing works.
Suitable for Trommelberg tire changers 1895, 1887IT, 1885, 1860, 1850B.
Jet Blast inflation systemModel No.: IT1860
Jet blast inflation system for Trommelberg tire changers 1887IT, 1885, 1860, 1850B.Includes air receiver, nozzle, operating controls and connection elements.
35
Things will go uphill!
Shaft diameter 40 mm
Balancing accuracy ±1 g
Total power 90 W
Power supply 1 PH x 230 V – 50 / 60 Hz
Net weight 149 kg
CAR WHEEL BALANCERautomatic data inputwith lCD monitor
Model No.: CB1990B
Technical Data:Rim diameter 8"–28"
Rim width (dynamic mode) 1.5"–20"
Measuring time 7 sec
Max. wheel diameter 1118 mmm / 44"
Max. wheel weight 70 kg
Computer controlled wheel balancer for balancing wheels (up to 70 kg) of cars, light trucks, sUVs and motorcycles. Designed for repair shops with medium and large amount of work.
Main features• Automatic input of wheel offset, width and diameter values• New measuring system ensures balancing accuracy for any wheel• LCD monitor + button controls• Special ALU programs ensure fast wheel balancing and allow succeeding the very first time• Protection from electric interference and changes of voltage
Other characteristics, programs and functions• Graphic representation of all balancing modes, controls and balancer condition• Static and dynamic modes, 5 ALU modes and 2 “Special ALU” modes, “Moto” mode for motorcycle wheel balancing• Applied balancing weights quantity minimization function (“Optimization”)• Special function for separate user calibration of car, SUVs and motorcycle wheels• Program for balancing weights application behind wheel spokes (“Split”)• Automatic foot brake for convenient weight application• Built-in light for rim illumination• Service modes: sensors calibration, measurement unit selection, unbalance rounding off selection, functional tests
Standard Shipment:• Wheel balancer with protective cover and
built-in light• LCD monitor• Centering cones with diameters from 46
to 146 mm• Caliper• HAVEKA (Germany) quick-lock nut for
40 mm shaft• Calibration weight 50 g• Plastic retaining ring• External measuring arm• Shaft extension 40 mm• Hammer-pliers
Options:see “Options for car wheel balancers” on page 38
36
Things will go uphill!
Total power 90 W
Power supply 1 PH x 230 V – 50 / 60 Hz
Net weight 128 kg
Options:see “Options for car wheel balancers” on page 38
CAR WHEEL BALANCERsemi-automatic data input with lED Display
Model No.: CB1960B
Technical Data:Rim diameter 8"–28"
Rim width (dynamic mode) 1.5"–20"
Measuring time 7 sec
Max. wheel diameter 1118 mm / 44"
Max. wheel weight 70 kg
Shaft diameter 40 mm
Balancing accuracy ±1 g
Computer controlled wheel balancer for balancing wheels (up to 70 kg) of cars, light trucks, sUVs and motorcycles. Designed for repair shops with medium and large amount of work.
Main features:• New measuring system ensures balancing accuracy for any wheel• Special ALU programs ensure fast wheel balancing• Protection from electric interference and changes of voltage
Other characteristics:• Automatic input of wheel diameter values• Static and dynamic modes, 5 ALU modes and 2 “Special ALU” modes, “Moto” mode for motorcycle wheel balancing• Applied balancing weights quantity minimization function (“Optimization”)• Special function for separate user calibration of car, SUVs and motorcycle wheels• Program for balancing weights application behind wheel spokes (“Split”)• Foot brake for comfortable weight application• Built-in light for rim illumination during application of adhesive weights• Service modes: sensors calibration, measurement unit selection, unbalance rounding off selection, functional tests• External LED display with control panel
Standard Shipment:• 4 centering cones with diameters from 46 to
146 mm• Caliper• Quick-lock nut for 40 mm shaft• Calibration weight 50 g• Shaft extension 40 mm• Hammer-pliers• 4 accessory holders• Protective cover
37
Things will go uphill!
Balancing accuracy ±1 g
Total power 250 W
Power supply 1 PH x 230 V – 50 / 60 Hz
Net weight 107 kg
Options:see “Options for car wheel balancers” on page 38
Technical Data:Rim diameter 10"–24"
Rim width (dynamic mode)
1.5"–20"
Measuring time 10 sec
Max. wheel diameter 1000 mm / 39"
Max. wheel weight 65 kg
Shaft diameter 36 mm
Computer controlled wheel balancer for balancing wheels with weight up to 70 kg.• Dynamic and static balancing mode• Measuring offset distance by means of measuring arm• Balancing modes: DYNAMIC, STATIC, ALU 1, ALU 2, ALU 3• Convenient external double LED display• Customer and factory calibration modes
Standard Shipment:• Centering cones: 42–61, 49–95 and
89–158 mm• Caliper• Quick-lock nut• Calibration weight 100 g• Flange disk• Threaded shaft• Hammer-pliers• Protective cover
CAR WHEEL BALANCERmanual data inputwith lED Display
Model No.: CB1910B
38
Things will go uphill!
OpTiOns FOR wHEEl BAlAnCERs
Universal Motorcycle AdapterModel No.: A13-36, A13-40B
Model No.: A13-36 for Model No.: CB1910B
Model No.: A13-40B for Model No.: CB1960B / CB1990B
Adapter for motorcycle wheel balancing.
The adapter allows balancing of wheels with a diameter of a rim central hole of 14 mm and more.
Universal Adapter for balancers with 36-mm shaftModel No.: A14-36
The adapter is designed for balancing of wheels without central hole. The adapter is mounted in the following way:• Use calipper or similar measuring device to measure the distance between fixing screw holes• After the distance is measured adjust the adapter correspondingly• Fix a wheel
The balancing process has to be performed regularly.The adapter is designed for wheel balancers with 36 mm shaft.
Universal Adapter for balancers with 40-mm shaft
Model No.: A14-40 for Model No.: CB1980
Model No.: A14-40B for Model No.: CB1960B / CB1990B
The adapter is designed for balancing of wheels without central hole. The adapter is mounted in the following way:• Use calipper or similar measuring device to measure the distance between fixing screw holes• After the distance is measured adjust the adapter correspondingly• Fix a wheel
The balancing process has to be performed regularly.The adapter is designed for wheel balancers with 40 mm shaft.
39
Things will go uphill!
OpTiOns FOR wHEEl BAlAnCERs
Kit for balancing light Truck and sUV wheelsModel No.: A1A2.36, A1A2.40, A1A2.40B
Model No.: A1A2.36 for CB1910B
Model No.: A1A2.40 for CB1980
Model No.: A1A2.40B for CB1960B / CB1990B
Kit for balancing wheels of Light Trucks and SUVs. It consists of a flange piece and 95 / 175 mm centering cone.
Gauge ArmModel No.: A6
Gauge arm for the exact positioning of a stick-on balancing weight while balancing wheels with aluminium rims.It is used for work with wheel balancers CB1910B.
Quick-lock nut for balancers with 36-mm shaftModel No.: A15-36
Used with CB1910B balancer.
Quick-lock nut for balancers with 40-mm shaftModel No.: A15-40
Used with CB1960B/CB1990B wheel balancer.
40
Things will go uphill!
Working hydraulic pressure
0–130 bar
Total power 2.9 kW
Power supply 3 PH x 400 V – 50 / 60 Hz
Net weight 597 kg
TRUCK TIRE CHANGERfor wheels with 14”–26” rims
Model No.: 1580
Fully automatic universal truck tire changer: all movements of the working parts are guided by the movable control platform. it is particularly suitable for handling truck wheels, farm vehicle wheels, earth-moving and industrial vehicle wheels between 14”–26” with deep grooved rims, ring rims and tubeless tires.
• Reverse rotation• Integrated hydraulic unit actuates the clamping mechanism and the mounting tool arm• Hydraulic motor with a pressure regulating device• Movable tool support• Adjustable rim clamping force• Quickly repositionable mounting tool
Technical Data:Rim diameter 14"–26"
Max. wheel diameter 1500 mm
Max. wheel width 1000 mm
Max. wheel weight 1000 kg
Bead breaking force 1500 kg
Standard Shipment:• Movable control unit• Mounting clamp• Mounting lever
41
Things will go uphill!
Working air pressure 8–10 bar
Balancing accuracy for Car/Truck
±1 / ±10 g
Total power 550 W
Power supply 3 PH x 400 V – 50 / 60 Hz
Net weight 217
TRUCK WHEEL BALANCERwith pneumatic lift
Model No.: CB1448
Technical Data:Rim diameter 10"–24"
Rim width (dynamic mode)
1.5"–20"
Measuring time for Car/Truck
10 / 20 sec
Max. wheel diameter 1200 mm / 47"
Max. wheel weight 200 kg
wheel balancer for trucks.• The microprocessor is composed of high-capacity and high-stability integrated circuit• Fully automatic dynamic and static balancing programs• ALU programs for alloy rims• Self-calibration and diagnostics• Pneumatic wheel lift• Pedal brake
Standard Shipment:• Pneumatic wheel lift• Mechanical measuring arm for offset distance
measurement• Calibration weight 100 g• Caliper• Pliers• 2 truck cones with flanges• 3 car cones (42–61, 49–95, 89–158 mm)• Wing nut
42
Things will go uphill!
MOBILE WASTE OIL DRAINER EXTRACTORwith inspection chamber
Model No.: UZM8097
Mobile air-operated unit for collecting waste oil by draining into the lifting basin or extraction through suction probes.
• Lifting basin is used to drain waste oil by gravity: max. the control of diameter of 570 mm (with a funnel); equipped with a metal mesh filter
• Air-tight, leak-proof transparent chamber allows quality and quantity of the oil being changed• The inspection chamber is made of heat-resistant material withstanding oil• Fast and easy extraction of waste oil from engines and gear boxes through suction probes under vacuum• Fluid-level gauge for measuring the oil tank capacity• Installation on pit, floor or under lifts• Accelerated oil discharge from the tank when compressed air is applied• Modern and reliable design
Technical Data:Oil tank capacity 80 L
Lifting basin capacity 20 L
Operating air pressure 7–10 bar
Max. oil extration rate at 60°C for probe 8х700 mm 6.5 L / min
Vacuum 0… –0.85 bar
Max. lifting basin height 1940 mm
Dimensions (WхDхH) (min.) 554 x 452 x 1.280 mm
Net weight 33 kg
Standard Shipment:• Oil tank with pressure gauge• Inspection chamber with vacuum gauge and measuring scale• Lifting basin with funnel• Kit of hoses for oil extration/suction• Probes with connectors for oil extraction– ∅ 5 mm х 630 mm (copper tube)– ∅ 6 mm х 630 mm (copper tube)– ∅ 5 mm х 700 mm (nylon tube)
– ∅ 6 mm х 700 mm (nylon tube)– ∅ 8 mm х 700 mm (nylon tube)– ∅ 7 mm х 1.000 mm (nylon tube)
43
Things will go uphill!
MOBILE WASTE OIL EXTRACTORwith inspection chamber
Model No.: UZM80
Technical Data:Oil tank capacity 80 L
Lifting basin capacity 13 L
Operating air pressure (vacuuming) 6–8 bar
Operating air pressure (discharge) 2.5 bar
Vacuum 0… –0.85 bar
Max. lifting basin height 1940 mm
Dimensions (WхDхH) (min.) 490 х 410 х 880 mm
Net weight 28 kg
Mobile air-operated unit for collecting waste oil by draining into the lifting basin or extraction through suction probes.
• Fast and easy extraction of waste oil from engines and gear boxes through suction probes under vacuum• Lifting basin (∅470 mm) is used to drain waste oil by gravity• Installation on pit, floor or under lifts• Fluid-level gauge for measuring the oil tank capacity• Air-tight, leak-proof transparent chamber allows you to view the quality and quantity of the oil being changed• The inspection chamber is made of heat-resistant material withstanding oil temperatures of up to 60°C• Accelerated oil discharge from the temporary storage tank when compressed air is applied• Modern and reliable design
Standard Shipment:• Oil tank• Inspection chamber with vacuum gauge assy• Plastic lifting basin• Kit of hoses for oil extraction/suction• Probes with connectors for oil extraction– ∅ 6 mm x 600 mm (copper tube)– ∅ 4 mm х 600 mm (copper tube)– ∅ 6 mm х 650 mm (PVC hose)
– ∅ 4 mm х 650 mm (PVC hose)– ∅ 6 mm х 750 mm (PVC hose)– ∅ 4 mm х 750 mm (PVC hose)
44
Things will go uphill!
Max. lifting basin height 1940 mm
Dimensions (W х D х H) (min.)
554 х 452 х 1280 mm
Net weight 26 kg
MOBILE WASTE OIL DRAINERwithout inspection chamber
Model No.: UZM8081
Technical Data:Oil tank capacity 80 L
Lifting basin capacity 20 L
Operating air pressure (discharge)
6–8 bar
Mobile air-operated unit for collecting waste oil by draining into the lifting basin.• Lifting basin is used to drain waste oil by gravity: max. diameter of 570 mm (with a funnel); equipped with a metal mesh filter • Fluid-level gauge for measuring the oil tank capacity • Installation on pit, floor or under lifts• Accelerated oil discharge from the tank when the impact of compressed air is applied• Modern and reliable design
Standard Shipment:• Oil tank with pressure gauge• Lifting basin with funnel • Hoses for oil extraction
45
Things will go uphill!
Working temperature -10… +50°C
Suction pipe height 940 mm
Air inlet fitting 1/4"
Oil exhaust fitting, male 1/2"
Max. carrying capacity of trolley
220 kg
MOBILE OIL DISPENSER KITModel No.: UZM12990
Technical Data:Air working pressure 5–8 bar
Pump ratio 5 : 1
Pump flow rate 12–18 L/min
Air consumption 240 L/min
Max. oil viscosity 250 SAE
Oil dispenser kit containing pneumatic pump, oil filler gun with electronic flow meter, trolley and hose. The pump is suitable for filling oil, removing waste oil and other neutral liquids. Built-in electronic digital flow meter allows continuous control of the amount of injected liquid.
Standard Shipment:• Pneumatic pump 5:1 • Trolley• Oil gun with electronic flow meter• Factory calibrated• High pressure hose
46
Things will go uphill!
Grease outlet fitting 1/4" BSP
Drum cover diameter 385 mm
Follower plate diameter 370 mm
Suitable for drum max. capacity
60 kg
MOBILE GREASE PUMP UNIT for 50 / 60 kg drums
Model No.: UZM2060
Technical Data:Operating air pressure 3–8 bar
Compression ratio 50 : 1
Max. grease pressure 400 bar
Max. free flow rate 800 g/min
Suction tube height 480 mm
Mobile unit specially intended for dispensing heavy thick grease. standard model is supplied with a trolley, an air-operated grease pump and a grease gun.
• High-efficiency dual action air-operated grease pump with a compression ratio of 50:1• Galvanized steel trolley with a long service life and neat appearance • Supplied with a drum cover and a follower plate • Grease gun is outfitted with a z-swivel for convenient operation
Standard Shipment:• Air-operated grease pump 50:1• Galvanized steel trolley• Drum cover• Follower plate• Grease gun with z-swivel • 1/4” BSP x 2 m grease connection hose
47
Things will go uphill!
MOBILE INFRARED DRYER 3 cassettes
Model No.: IR3 Economy
Mobile short wave infrared dryer with 3 heating cassettes for very effective drying of large-area coatings. separately controllable and equipped with a preset program.
• 50 cm quartz halogen infrared lamp• Hydraulic cylinder with clamping mechanism keeps console with cassette plate in a level position • Cassette plate rotatable by 300° • LED indicator for drying mode and power displays• Mechanical power regulation• Overload protection• Each cassette can be controlled separately
MAX. CURING AREA
1200 х 1000 MM
Set time | up to 60 min
Timer electronic
Technical Data:Power 3 x 1100 W
Max.curing area 1200 x 1000 mm
Curing distance 30…60 cm
Power supply 1 PH x 230 / 50 Hz
48
Things will go uphill!
MOBILE INFRARED DRYERS1 cassette / 2 cassettes
Model No.: IR1 Economy
IR2L Economy
Model No.: IR1 Economy
Model No.: IR2L Economy
Mobile short-wave infra-red dryer for high effective drying of automotive coating.• Robust metal construction with ball-bearing wheels• Vertical adjustable IR lamps cassette • Adjustable arm for adjusting the second IR cassette horizontally (IR2L Economy only)• Quartz halogen infrared lamp• Stainless steel light reflectors• Exact positioning of the radiator by a 360° turning and swiveling lamp housing
IR2L Economy
Power 2 x 1100 W
Max.curing area 800 x 800 mm
Set time | up to 60 min
Timer mechanical
Curing distance 30…60 cm
Power supply 2 x 1 PH x 230 / 50 Hz
Technical Data:
IR1 Economy
Power 1 x 1000 W
Max.curing area 800 x 500 mm
Set time | up to 60 min
Timer mechanical
Curing distance 30…60 cm
Power supply 1 PH x 230 / 50 Hz
MAX. CURING AREA800 х 500 MM
MAX. CURING AREA800 х 800 MM
49
Things will go uphill!
PREPARATION AREAModel No.: PA6334
Technical Data:Air flow vertical
Base metal
Floor fully grilled
Lighting 32 lamps x 36 W (both sides)
Total power (lighting included)
12.5 kW
Dimensions
Working area (L x W x H)
6300 х 3450 х 2700 mm
Standard Shipment:• Heating/ventilation unit with 2 motors, an oil
burner and a damper• Duct (5 m over base) • Chimney (10 m over base)• Fully grilled metal base• Plenum with a ceiling filter and lights• Control unit• 2 drive-in ramps• Pre-filter• Fine filter• Floor filter• Ceiling filter• Set of PVC-curtains • Chimney (10 m)
preparation area with floor or wall exhaust. By floor exhaust with a metal base and fully grilled floors. it is equipped with an intake/exhaust unit and a heating system with the RiEllO oil burner.
• Two centrifugal fans provide sufficient air for all types of preparation works• Floor exhaus with fully grilled floors • Built-in filters for trapping sanding dust and paint overspray• Two operation modes: full air exchange and air recirculation• Plenum with a fine filter provides the recirculation mode and ensures uniform distribution of air flow. Plenum is equipped with 8 lighting
panels with 4 lamps each (32 lamps totally), power consumption is 12.5 kW• Damper for switching between the full air exchange and recirculation modes• 4 stage air filtering: intake and exhaust pocket filters, floor filter for trapping paint and ceiling filter for fine air cleaning• Control panel for the heating/ventilation unit is equipped with temperature controller, time setting, hour meter, emergency stop and failure
indicators• Metal base for installation over floor or at the floor level• PVC curtain with a transparent insert to isolate the car from the rest of the room
Plenum (L x W x H) 6300 х 3450 х 400 mm
Heating/ventilation unit (L x W x H)
2500 х 1200 х 2400 mm
Drive-in ramps 2000 х 750 mm
Heating/ventilation system
Motor power 5.5 + 5.5 kW
Air flow up to 15500 m3/h
Burner heating capacity up to
200000 kcal/h
50
Things will go uphill!
SPRAY BOOTHModel No.: SB7428
italian made, High Quality spray Booth 7 х 4 х 2.76 m with combined intake-exhaust unit.
Main features• Due to partial pre-assembly during production the installation time has been reduced by almost 50%!• Due to a highly effective heat exchanger the booth ensures high quality painting in total air exhaust phase and offers very comfortable
working conditions throughout the year• Fast and effective air heating: application of 4-way construction heat exchanger made of special heat-proof steel substantially increases
productivity• Four stage air filtering: air intake pocket-type prefilter Eurovent EU4/G4, high efficiency ceiling fine filter M5 / EN779 class, two-stage
paint stop filter Eurovent EU3 + Eurovent EU4 (also performs a function of the exhaust filter)• Cabin illumination of more than 1500 lux!
EC-RegulationsThe spray booth is manufactured in compliance with the following directives and standards:
• 2006/42/CE, Machinery Directive• 2006/95/CE, Low Voltage Directive• Directive EMC 2004/108/CE, Electromagnetic Compatibility Directive 94/09/ CE ATEX Directive, according to standard EN13355 par.
5.8.2 – 5.8.2.1 – 5.8.2.2.
Cabin / Plenum / LightingThe SB7428 spray booth cabin is being assembled of 40-mm interlocking male-female pre-assembled panels. All panels are made of double steel pre-painted plates and polyurethane self-extinguishing thermo acoustic insulating material. The cabin is pre-painted inside and outside. For
51
Things will go uphill!
Technical Data:Dimensions
Inside (D х W х H) 7000 x 4000 x 2760 mm
Outside (D х W х H) 7160 x 5010 x 3740 mm
3-fold door (W х H) 2700 x 2700 mm
Heating/ventilation system
Air Intake motor power 7.5 kW
Air exaust motor power 7.5 kW
Heating power capacity 220 kW
Max. air capacity in paint phase 24000 m3/h
Max. temperature in spray phase (at outside temperature 0°C)
30°С
Max. temperature in bake phase 80°С
Max. oil consumption (at 20°С) 19 kg/h (15°E 10200 Cal/kg)
Mains
Total power 17 kW
Power supply 3 PH x 400 V / 50 Hz
Lighting power 1856 W
Standard Shipment:• Total floor grating: 35 galvanized grates with load capacity of 800 kg/
wheel print• 3-folds main entrance door in white• Side service door in white with laminated safety glass window• Metal base 340 mm height• 8 light fixtures with 32 х 58 W triphosphor high efficiency neon tubes,
XL series, Daylight, IRC 85• 4 way heat exchanger made of heat-proof steel• 2 х 7.5 kW belt driven fans with forward curved blades• Integrated “Easy Control” control panel• Filter set• Forner shelf for tools• Sliding parts hanger• Coloured scale manometer to indicate pressure inside the booth• Block device on compressed air line• Manual reset safety thermostat• Minimum pressure switch• Maximum pressure switch• Flow switch to control air flow• Acoustic/visual alarm on the control panel• Emergency lighting kit with visual alarm• Aluminum plate for emergency exit, 2 pcs• Door closer for service door, 2 pcs • Door bottom seal
maximum security all windows are made of shock resistant stratified safety glass and the doors are furnished with spring-activated push-to-open door catch. A corner tool shelf and a sliding parts hanger inside the cabin provide a helpful working environment to the painter.The plenum is equipped with high efficiency ceiling fine filter EU5. The ceiling corner-type lighting consisting of XL series neon tubes (IRC 85) provide maximum illumination and neutral color temperature – granting perfect car refinishing work and best possible conditions for color matching.
Floor / Floor filterThe spray booth is installed on a metal base but can also be installed on 340 mm pit if required. The total floor grating consists of galvanized grates with a load capacity of 800 kg/wheel print. All base parts are made of galvanized steel. Under the whole grating surface the two-stage paint stop filter consisting of EU3 and EU4 layers is laid. Such filter design provides effective contamination protection of exhaust fan and ensures high effectiveness of the ventilation system.
Heating unit / FansThe spray booth is equipped with two centrifugal fans with explosion proof electric motors having 7.5 kW power each. Fan forward curved blades ensure high effectiveness. EU4 pocket prefilters are installed at the fan inlet.The spray booth design provides operating in total air exhaust phase and in air recirculation phase; also it allows the manual pressure adjustment inside the booth cabin by means of the damper installed on the exhaust line. In the air recirculation phase (partial air change) optimal air change parameters and constant temperature on a car surface are maintained and high fuel economy is ensured due to the repeated flow of the heated air through the cabin.
Control panelThe control panel “EASY CONTROL” is integrated into the front wall of the spray booth. The panel contains a temperature controller for spray and bake phases, baking timer and hours meter. The system has an automatic baking and cooling mode.
Packing and assemblingSB7428 Spray booth is delivered partially pre-assembled – reducing the installation time by half.
Optionals:• Corner lighting kit, 4 pcs., 928W, Art. CL4458• Oil Gas burner with heat exchanger or gas direct flame burner • Ramps• Ducts• Chimney
52
Things will go uphill!
PLATFORM BENCHESModel No.: B19G
B22G
Bench with whole-body liftModel No.: B22G
Bench with sidewise tilting liftModel No.: B19G
53
Things will go uphill!
OpTiOns
Model No.: UC9
set of clamps for frame-type car, 4 pcs.
Model No.: D104736
pneumo-hydraulic pump with foot drive for work with benches, hydraulic spreaders and other devices requiring high pressure of hydraulic liquid.
Standard Shipment: B22G B19G
• Platform 1 1
• Tower 2 2
• Drive-in ramps 2 2
• Whole-body lift 1 -
• Sidewise tilting lift - 1
• Main clamp 2 2
• Climb tower 4 4
• Wheel bracket 2 2
• 3.5 m chain with hook 2 2
• 1.2 m with hook 4 2
• Small clamp 1 1
• Box clamp 1 1
• Scissors clamp 1 -
• Multi-direction clamp 1 -
• Hook & bracket 1 1
• Steel hook 1 -
• Deep hook 1 1
• Chain shortener 1 1
• Chain linker 1 1
Technical Data: B22G B19G
Platform length (mm) 5 500 5 500
Platform width (mm) 2 100 2 100
Platform height (mm) 360–600 560
Pulling Force (t) 2 x 10 2 x 10
Operating Air Pressure (bar) 8 8
Capacity (kg) 3 500 3 500
Weight (kg) 2 500 2 500
• Draw board 1 1
• Nylon strap 1 1
• Steel wire 1 1
• Pull down set 1 1
• Chain located claw 2 -
• Hydraulic mandril set 2 -
• Wedge 12 -
• Extension set 2 -
• Chain holder 4 -
• Ball for hydraulic cylinder 2 -
• Shock absorber set 1 -
• Electric car pull winch 1 -
• Second lift set 1 -
• Mobile tool trolley 1 1
• Hook for tool trolley 26 16
• Device for pull up 1 -
• Shock absorber 1 -
• Air pump set 2 2
B22G B19G
Platform benches are designed for alignment of a car body with any type of damages.
The benches are equipped with a platform with lateral recesses for four standard body clamps mounted in any point of the platform.
The clamps are easily mounted on the platform by means of a single bolt. Such configuration ensures fast and simple adjustment of height, inclination and angular rotation of the heads.
Two hydraulically driven pulling towers with the pulling force of 10 tons can be easily moved around the platform which makes it possible to apply pulling force to any point of the car body. Change the position of the collar with pulley to specify the height of the pulling force application point.
To drive the vehicle on and off the platform there is a whole-body lift set. Use integrated hydraulic pump ENERPAC to control lifting and lowering cycles of the platform. Standard bench set also includes two drive-on ramps.
Apart from these specified features, Trommelberg bench standard shipment includes a wide range of accessories: chains, clamps, fixtures, chain connectors and chain’s shortener etc.
54
Things will go uphill!
FRAME BENCHModel No.: B4G
Frame bench with lifting unit and hydraulic power unit, tower and accessories for medium or small car body repair. The bench features small size, big pulling force and flexible control. it does not require specific devices for vehicle drive-on and drive-off during operation.
• Suitable for all types of body shops.• Can be used in repair of most cars and light trucks weighing up to 2.5 tonns• Does not require much work space. Extremely compact when out of use • Can be used as a scissors lift for body work• Simple and reliable design ensures convenient operation and long useful life• The standard equipment of the bench allows you to carry out full-scale body repair at no extra cost• Low cost – fast recovery of initial costs
Max. pulling force 5 t
Total power 2.2 kW
Power supply 1 PH x 230 V / 50 Hz
Max. lifting capacity 2500 kg
Net weight 1300 kg
Technical Data:
Frame length 3440 mm
Frame width 850 mm
Frame height 120–1300 mm
Max. working pressure of hydraulic system 550 bar
Working air pressure 6–8 bar