32 bit RISC CPU POWERmedia.klinkmann.ee/ee-files/ProFace.pdf · Reduces oveall debugging and maintenance time Data transfer is twise as fast The GP77R's blistering 115.2 Kbps* speed

ISO9001JQA-1367

www.klinkmann.com

32 bitRISC CPU POWER

low cost volume HMIeasy configuring with PCvarious interfaces for PLCs, LANs,fieldbuses, networks, wireless etc.

User Interface Panelsfor PLCs and other CPU devices

G P S E R I E S

0 1

Programmable Operator Interfaces

ProgrammableOperator InterfacesGP SERIES

Faster, Smarter, BrighterPro-face's New GP77 series Operator Interfaces with SuperHigh-Speed 100 MHz RISC CPU

Next generation programmable operator interface - "From PLC's Face to its Brain" - the Power GP Series!

G P S E R I E S

0 2


Power GP Series Full Line up!!

Today's rapid pace of high-tech innovation

has increased the need for industrial

automation.

Pro-face's "GP Series" programmable

operator interfaces, in pursuit of more

comfortable communication between

human and machines, have been striving

for the best: high performance and

advanced design.

Going through a series of innovation, GP

Series have gained popularity among

many users.

"From PLC's Face to its Brain" - Pro-face's

lineup of new concept programmable

display panels each pursues the primary

goals of the next generation of industrial

automation, "Faster, Smarter and

Brighter".

High PerformanceInterface GP77 Series 03-04

GP77 SeriesStandart Features 05

Evolving HMI-from PLC's"Face" to its "Brain" 06

Allows you to monitoryour production siteinformation in real time! 07

Save DevelopmentTime and Space whileImproving Operability 08

GP-PRO/PB forWindows ver. 4.0Version up Features 09-10

GP-PRO/PB for Windows StandartFeatures 11-13

A Wide Range of Supported DataFormats 14

Fieldbus Network andPeripheral Connections 15-16

Connections 17-18

Global Safety StandardComplian Products 19

Global Support Network 20

Specifications 21

c o n t e n t s

G P S E R I E S

0 3


32

bit

RIS

C C

PU

PO

WE

RHigh Performance Interface GP77 Series

GP-577RT 100MHz RISC CPU Resolution : 640X480 pixels 10.4 inch TFT Color LCD FLASH EPROM 2MB (Screen Memory)

GP-577RS 100MHz RISC CPU Resolution : 640X480 pixels 10.4 inch STN Color LCD FLASH EPROM 2MB (Screen Memory)

GP-477RE 100MHz RISC CPU Resolution : 640X400 pixels 9 inch High Intensiry EL FLASH EPROM 2MB (Screen Memory)

GP-377RT 100MHz RISC CPU Resolution : 320X240 pixels 6 inch TFT Color LCD FLASH EPROM 2MB (Screen Memory)

Multi Unit E(Model: GP377RT-MLTE41)*Only for GP-377R

2-Way (via Ethernet) communication Printer I/F CF card support

G P S E R I E S

0 4


GP-377S 100MHz RISC CPU Resolution : 320X240 pixels 6 inch STN Color LCD FLASH EPROM 1MB (Screen Memory)

GP-377L 100MHz RISC CPU Resolution : 320X240 pixels 6 inch Monochrome LCD FLASH EPROM 1MB (Screen Memory)

New Low-Cost, High Performance 6 inch Models

ne

w f

ac

e

Ultra-fast 100MHzRISC CPU equippedQuick startup and screen change forsmooth operation!3 times faster overall performance. *1

2 times brighter *1 / 30,000hours *2 backlight lifetime2 times brighter display and 1.5 timeslonger backlight lifetime.*1 Compared to GP-370S and GP-370L.*2 24 hours/day use at normal operating temperatures.

High Quality Asian FontsChinese, Korean andTaiwanese fonts displayed onGP377 S/L units are,now, available with smootherquality of 32X32 dots.

Back light Burn-out DetectionFor your safetly operation, thebacklight can be monitored on thefront panel LED with the Touch panelInput control settings.

China Korea Taiwan

16X16 32X32 16X16 32X3216X16 32X32

G P S E R I E S

0 5


32

bit

RIS

C C

PU

PO

WE

R

faster

GP77 Series Standard Features

Faster Brighter ClearerFast screen changes forsmooth operationNew 100MHz chip is 3 timesfaster!*The GP77's RISC CPU calls up and opensscreens in a flash, providing smooth,"no-wait" operation.

* Compared with GP70 series unit running demo application.

Clear viewingin bright areasBoth TFT and STN displaysare 2 times brighter!*The GP77's screens are twise as bright asGP70 series units, and rival that of astandart CRT.

* Compared with GP70 series.

Create active andvivid applications64 color TFT and STNDisplaysThe GP77R's easy-to-read 64 colordisplay allows you to create dynamicapplication screens.

Reduces oveall debuggingand maintenance timeData transfer is twise as fastThe GP77R's blistering 115.2 Kbps* speedcuts your PC to GP data transfer time in a half.It also means you spend your valuable timemaintaining and debugging, instead of waitingfor data download or screens to change.

* Some PCs do not support 115.2kbps data transfer

38.4Kbps

115.2Kbps

Type R

GP70 Series

V4.0

Adjusts to any environmentSelect from 4 brifhtness levels*You can easily adjust the GP77's brightnesslevel to fit your operation needs.

* GP-477RE has 2 levels of brightness

Alarm types are recognizable at a glance3 flashing speeds*Screen data ON/OFF blinking speedsare selectable (slow, medium, fast),making alarms and data easy torecognize.

* Available with GP-577RT, GP-577RS and GP-377RT/S only.

Long - life backlight

In additionto improved brightness,backlight lifetime is significantly longerthan GP 70 Series units. Backlights arealso user-replaceable ang easilychanged.*1

GP-377 RT (50,000 hours)*2

GP-577 RT (40,000 hours)*2

GP-377 S/L (30,000 hours)*2

GP-377 RS (25,000 hours)*2

* 1 exept GP-377RT* 2 Time required for backlight brightness to decrease 50%

High speed GP - to PLCcommunication

GP77 Series supports high speedRS-232C data transfer (115.2Kbps)

PLCs supporting 115.2Kbps*Matsushita FP10SHMitsubishi Melcec QnA seriesOMRON CS-1Sharp JW30 series

* For more details, please contact your sales representative or Pro-face.

Built-in 2-port Function

The 2-port function, using the "DataTransfer Cable", and "Programming I/FCable", allows direct connenctionsbetween GP and Mitsubishi PLC.This reduces your connection costs.

* No 2-port adapter required

Built-in 2-portfunction

Data transfer cable

2-portadapter

Programmingtool

MitsubishiPLC

Ladderprogrammingtool

Mitsubishi PLC

ProgrammingI/F cable

G P S E R I E S

0 6


Evolving HMI-from PLC's "Face"to its "Brain"Programmable Operator Interface revolution!-GP77R Series

Intelligent operator interfaceThe GP77R SeriesPro-face's GP77R series units help you meet the recentdemands put on the workplace by ISO, PL and HACCPrequirements. Pro-face's new hardware and softwareallows you to easily collect vital historical productionmaintenence data, and helps you perform esential preven-tive maintenence.The newly developed GP77R panel transforms the role of an HMI from the "face" of the PLC ti its "brain". This addsup to significant cost and man-hour savings for the manage-ment and control of your processing information.Furthemore, the combination of high-speed I/O control bet-ween these units and connectable PLCs, and the GP77R'senhanced "intelligence" ensures that your applicationsperform better than ever.

Past fromNow

Network Open Network

Calculation

Data Processing

Data Filing

Communication

I/O Control

Calculation

Data Processing

Data Filing

Communication

Operator I/F

I/O ControlOperator I/F

Intelligent Features

New Products Supporting the GP77R Series Evolution

Data Filing Communication

Logging Function Allows you to easily report production information directly from your factory floor.

Recipe Function Provides production setting data quickly to PLCs in a Flexible Manufacturing System. Present values and process conditions can be easily replaced at any time.

2-Way Communication This software allows you to share data with PLCs with ni network capability, or between different makes and types of PLCs.

Ethernet EthernetEthernet

Printer Printer

PC PC

Back upMemory

orCF card*

Back upMemory

orCF card*

PLCPLCMemory

Memory

Memory Memory

Memory

Memory

Separarte Programs

PLC

Maker A Maker B Maker C

Single Configuration

PLC

Screen editor software

with Pro-Studio(PSW-ED01-V20 or higher)

Features include the ability to Log and File PLCinformation. Helps to reduce PLC ladderprogramming processes/steps and amount ofmemory used.

Data collection software

with Pro-Studio(PSW-ED01-V20 or higher)

This software allows the GP77R to act as"Ethernet gateway" and provide programless datacommunication between a host PC, GP77R andmultiple different PLCs via an Ethernet network.

Large size / Medium size Multi Unit

(GP077-MLTE41(GP377R-MLTE41

The optional Multi Unit Eexpands the GP77R Seriesconnenctivity with anEthernet I/F. CF card I/F andSound output I/F for P477R/DP577R and rinter I/F for GP 377RT.

Photo: Multi Unit E(Model: GP377R-MLTE41)

Expansion Unit

(10BASE-T)(Model: GP070-ET41)

This interface unitallows GP to transmit data withthe host via EthernetNetwork.

GP-577RTGP-577RS

GP-377RTGP-477RE

100MHz RISC CPUProgrammable Operator Interface

GP77R Series

G P S E R I E S

0 7


32

bit

RIS

C C

PU

PO

WE

R

2 3 4 5

1

6

Allows you to monitor your productionsite information in real time!

2-Way Data Collection Software

Pro-Server with Pro-Studio V2.0Logging Function Alarm History Function

ProductionControl

Allows you to easily create

daily andmonthlyreports

Ensures precise alarmcontrol. Voice alarm and

alarm displays areautomatically executed.

Allows you to easily give

instructions andcollect data forproduction line.

Provides different types of program-less 2-Way data communication6

Exchangesdata with

network PLCs.

LoggingData

storage in GPmemory

and/or CFcard

Filingdata storage

in GPmemoryand/or

CF card.

Sends andreceives GP

filing data viaMS Excel.

Sends andreceives PLC

device data viaMS Access.

Collectsevent

data PLC via MS Access.

Sends andreceives GP-

acquired datravia MS Excel.

Collects PLCdata via

MS Excel.

Program-less datacommunication Program-less data

communication

A company PLC B company PLC C company PLC

Alarm!

Polling (Optimization Function)Data can be read from multiple GP units simultaneously,thereby reducing the number of data read requests froman application. Improves data read perfomance when usingmultiple GP units.

Security FunctionPasswords are used to prevent data access by personelother than system administrators, thereby protecting datafrom problrms such as device overwriting, etc.

CF Card Transfer FunctionLogging, filing and alarm data that has been "filed" viathe GP's screen editor software can be transfered toanother GP77R unit's CF card using an Ethernet network.** requires installation of Multi Unit E.

OPC Compatible (OLE for Process Control)Microsoft's object technology OLE/ActiveX allowsmanufacturing related industrial applications to be easilyconnected.

Device Monitoring FunctionSince PLC devices can be memored by simply selectinga symbol, on Pro-Studio a simple simulation can beperformed prior to starting an application. With this function,multiple screens can be displayed at one time, and the IPaddress and device address can be input.

RR R R R

Recipe Function

Work/production

siteinformation.

G P S E R I E S

0 8


Save Development Time and Space while Improving Operability

Downsize and Simplify Your Application

Simple Communication Methods

Create Unique Screens in Minutes

Minimize Your Work for Maintenance and System Expansion

Using the GP series keep your systems aspossible, even though your control programs getmore and more sophisticated.The touchpanel graphic operator interface, GPSeries, is a state-of-the-arts intelligent equipment,which has been widely installed as a main operatorpanel throughout the manufacturing fields. You can operate production systems via numerous data and graphics displayed on the screen, whilereducing numbers of control programmingand wiring.

[Direct Access Method]

Simply select your target PLC when you createscreen data. The Direct Access method allows the GP to communicate with Word and Bitdevices in the PLC memory directly. Since thismethod is, also, called as a program-lesscommunication, there will be no extra loadon the PLC.

[Memory Link Method]

You can create your own communicationprograms to connect the GP with yourspecialized controllers, such as single-boardcomputers and PCs. The GP displays datamapped from the host's memory for monitoringand operation.

You can simply and freely create your ownoperation screens for each requirement inyour applications, using a variety of powerfultools, such as the Part Box, Tags andD-Script macro program, on the GP-PRO/PB||| for Windows software. The software creationof the operator interface also, allows you easychange, debugging and reue of the datawhenever required

After creating data, just download it to theGP unit, then connect the GP with the hostvia a single cable for immediate operation.Ypu can, also, simulate the GP with your PCfor quick debugging, before you take it tothe field.

ISO-7000 Symbols

Meter Graphs

0001

0002

0003

00040001

0002

0003

0004

G P S E R I E S

0 9


32

bit

RIS

C C

PU

PO

WE

R

1P O I N T

GP Series Screen Editor Software

GP-PRO/PB ||| for Windows Ver.4.0 Version UP Features

Screen Creation andEditing is Easier and MorePowerful Than Ever

Use Your Device Addresses More Efficiently

Quickly Check Load Screen nesting Levels

Try These Userful Functions!!

Global Cross references! Maintenence is easier than ever! (List Display)

All of a project'sdevice addresses canbe checked at aglance.

System Upgrades Ares Easier! (Map Display)

Device addresses usagecan also be displayed asa chart, allowing you toeasily find unusedaddresses.

Nesting List!Version 4.0 can create a Nesting List for complex screenscontaining multiple Load Screens. This will speed up Your screenediting as you no longer need to spend time searching for a loadscreen's original data.

Enlarge and Move Objects Via Your Keyboard CursorFine-tuning the position andlayot of your screen objects onscreen grid points via a mousecould be difficult. Version 4.0allows you to use yourkeyboard's arrow keys toenlarge and move objectseasily, making detailed screencreation and layot easier thanever.

Move by a dot Enlarge by a dot

Direct Entry of Drawing Object Coordinate Values.To change an object'sposition or size, just enterthe object's coordinatevalues, guaranteeing100% accurate screenlayot.

Cursor Position Zoom.Enlarges the area whwere thecursor is currently positioned 3times, allowing easy editing ofdetailed screen drawings.

Hairline CursorUse this cursor as astandard when you alignscreen objects.

Font selection and Mark ScreensWindows fonts can beimported as character datato a project's Mark screens via the font selection function,allowing you to createscreens with a variety oftypes of characters.

Text Imageszoomup!

Pi!

2P O I N T

3P O I N T

4P O I N T

G P S E R I E S

1 0


Improve your efficiency by reducing the amount ofrepetitious Alarm message editing and registration.

Importing/Exporting ProjectAlarm Data ImprovesEfficiency

Extended Logging/Filing/Programming Functions

Expanded Range ofPoweful Tools

Alarm Editor Screen

Version 4.0 allows easy editing and document control via CSV format data.Using the CSV format, alarm files can be exported to the spread sheet software such asMS-Excel, where alarm messages can be added and edited more efficiently. Once thiswork is completed, these CSV format files can be imported back to GP-PRO/PB||| forWindows and alarm files.

[Logging] [Filing]

[D-Script]

Improved Data Collection via "Looping"When the acquired logging data exceeds the GP'smemory capacity, data logging can continue bysimply overwriting the previosly acquired loggingdata. Also, logging data can be saved automaticallyto a CF Card with a simple setting.

Transferable data items are increasedThe number of data items, that can be tranferred at one time has been increased to 1000 words.

Multible data filing FoldersMultiple folders of filing data can be stored in both the CF-Card and the GP's international memory.

The number of data items, that can be tranferred

Memory Batch Copy Memory Block Initializatio Loop Processing Address Offset Designator

GP-X10 Series screen datacan be converted easilyUp loadded from GP-X10units to GP-PRO/PB||| for Windows V4.0 directly andconverted for the later GPmodels.

[Wide Variety Files of Images] [Useful Sound Messages] 270 of 64-color Part images areodded for more sophiticatedscreens of your applications.

Redy to use 270 message samplesin the WAV format are provided. Alarm has occurred. Return loweing elevator Confirm status. to upper limit position. Now opening entrance Now raw materials door. available Starting operation. This card can not be Temperature alarm. used. Careful - Now rotating. Conveyer is operating. Add material to hopper.

GP-PRO/PB||| forWindows v4.0

GP-*10 Screen Data

direct

CSVFormat

G P S E R I E S

1 1


32

bit

RIS

C C

PU

PO

WE

R

1 2 3 4

GP-PRO/PB||| for Windows Features

Reduces GP program debugging timeEven if you don't have a PLC available to test your newGP program, you can still quickly and easily check whetherthe program works as planned via this feature

* This feature is not available with Memory Link selection.

Intelligent operator interface

Simulation Documentation

File Managament

Create Screens in Minutes High-level funktionalitity More SophisticatedProgramming

PartsPlacementSelect from over 1800pre-made Parts. Chooseonly the ones you needand place them on yourscreens.

LibrariesMuliple objects can begrouped and registeredfor your own library.

Tag SetupA wide variety of userapplications can be easilycreated using the Tagfunctions (active screen)

D-ScriptEasy to use Macroprogram reduces thehost controller's pro-gramming load.

[Automatic Documentation]Reduces time required for creating documentsJust by selecting the items you wish to print out, you cancreate specification and manual documents easily. You canalso use this feature to export project data in RTF format.

Allsupported

PLCsare OK!

Just select from menu...

...and print!Export in RTF format

[Project Manager]Simplifies Project Screen managamentScreen data can be managed via individual screen files.In addition to moving or copying screen data, simplydoyble-clicking on a file name allows you to edit thatscreen. You can also make data files sharable throughyour PC network.

G P S E R I E S

1 2


Simple Communication Methods

[1,800 Part to Choose]Over 1800 parts and symbols arestored in the GP-PRO/PB||| library.Just select the ones you need andplace them onto your applicationscreens.

Parts

Adjustable Switch Sizes and Layot Minimum Touch Switch Size: 20X20 pixels 1 or 2 point touch selectable

ONON

MANUALMANUAL

MONITOR

MONITOR

20 pixels

20 pixels

Touch/Switches/Lamps/Graphs/Numeric Displays/Picture Displays/Alarm Displays/Data Displays

Switches Tank Graphs

Lamps Library Parts

[Historical Alarm Display] Display Types: Active, Historic, Log Time format: hours, minutes, and even seconds* can be displayed. * Not supported by GP270 Series

[Alarm Summary]Allows easy machine condition monitoring and fastmaintenence

Alarm Types:summary display,message scrollingSub. Windowscan be easily setup for detailed inmatim

Sub-Window Image

Detailed information for an individual alarm message can bedisplayed in a sub-window. You can easily create an on-linemanual for quick maintenence.

[Picture Display] Enable to visualizes entiresystems

Graphics:Dot, Line, Polyline, Square/rectangle, Fill, Polygen, Circle,Oval, Arc, Pie, Scale, Mark,ISO-7000 Mark LibrariesAttributes:Lighted, blink, reserve, off

PrintoutDisplay screens can be easily printedout for daily report.* Supported only by large-sized GP unitsGP377RT series

Data StorageAlarm data can be backed up in GP'sbackup memory.* This feature is supported only by certain large-sized GP and GP377 series.

[Text Display]Multiple character sets supported Fonts: ASC|| (English and European) Chinese, Japanese, Korean, and Taiwanese fonts. Font Styles: Normal, Bold, Raised.

[Image Display]Photo and CAD images can be imported

BMP image display

DXF image display

Importable Files DXF: Common file format for CAD and 3D screens BMP: Image format for pictures from digital cameras or image scanners

[Graph Display]Various Types of Graphs to Visualize Important Data Data Foramat: 16-bit absolute/indirect data Data Display Format: Binary, BCD Warning Display: direct/indirect setup for maximum and minimum ranges

Graph Level Status by ColorsFill-Below-Line for Trend GraphTank Graph (Library parts)Meter Graph (parts)** These features not supported by GP270 series

G P S E R I E S

1 3


32

bit

RIS

C C

PU

PO

WE

R

Screen Editing[Dublicate Copy]Specifying the nuber of columns androws to be muliplied will allow you toeasily make multiple copies of anyobject. Addres incrementation canalso be performed automatically.

[Object Drawing]With a rich array of drawingtools, screens can be drawnquickly and easily - like CADsoftware.

[Active Window] Up to 3 window screens can be displayed a single base screen, all simultaneously displaying animated data. Global Window: (1/screen) A common window for all screens Local Window: (2/screen) Unique window display for each screen Screen overlay order can be changed with a touch.

[Video Display]Video feeds provide live data* This feature is only supported by GP-570VM.

Video Display Size: standart mode, zoom mode Transparent display of Video Window 3 NTSC video input channels VGA disolay (640X480 pixel)

[Tags]Tags are used for the creationof your screen animationfunctions. 30 different tagfunctions have been preparedfor the GP Series units.Combinations of these tagsproduce a wide variety offunctionallity, allowing you toexpand the scope of yourapplications.* Depending on the GP models, supported Tag features variety.

["D-Script"-MacroProgramming Language]Implemet a variety of simplecontrol tasks with thispowerful tool

features include: Math: +, -, *, /, Remainder, Assign Boolean: AND, OR, NOT, <, <=, >, >=, EQUAL, NOT EQUAL Triggers: Timer settings, Bit Rising, Bit Falling, when expresion becomes True/False Functions: Load screen,Draw

Dublicate copyEnlarging andreducingDrawing Area

VM screen

VGA screen

Tag Features

Touch Switch Alarm Summary <touch panel input> <alarm summary text display> <keyboard setup> <alarm summary display> <selector switch input> Alarm Message Display> <inching function> Graphic DisplayNumeric Display <object drawing> <numeric display> <library display> <static data display> <library static display> <alarm boundary display> <mark display>Graph Display Animated Objects <graph display> <free library display> <static graph display> <moving mark display> <static data display> <rail settings> Trend Graph Display Character DisplaySetting Input <string display> <key input< <display text data> <keyboard setup> Time Display <alarm boundary> <time display> Device Write <write to device> Window Display <window display> Video Window Display <video window display>

* Some of the above features are not supported by GP-270

Powerful Programming Tools

G P S E R I E S

1 4


Sound Output Function

A Wide Range of Supported Data Formats

CF Card Support (Compact Flash)

Dynamic Link between Operations and Control

An optional unit allows WAV format files(i.e. sound, alarm) to be imported to theGP, and played through an externalspeaker. This feature can be used in avariety of applications, such as multi-media, and machine operator information.

Filing CSV dataTrend data, sampling data and alarm active/history/log data can all beexported to the CF card using the CSV file format. Database andspread sheet applications can then easily import this data for information managament and processing.

Screen Data StorageA screen project on GP unit can be copied on a CF card formaintenance purpose. Prior to copying the project to onather GP unitsystem, set up on the GP unit is required.

Memory Expansion on CF cardIn addition to the internal memory on GP unit, following data can be stored for GP operation: Filing Data Logging Data Sampling Data Trend Graph Data Alarm Data Image Data Sound Data Screen Project Data

* Multi Unit E required

GP-PRO/PB||| forWindows V4.0

Pro-ControlEditor V2.0

(under Development)

Simple input/output operations can be performed by merely dragging and dropping. You need no knowledge of programming.

All the data required for the parts on the screen(addresses, name plates, and names) are automaticallypassed by dragging and droppingthe coresponding cymbols created on the ladderover the screens of the GP-PRO/PB||| forWindows. You no longer need to preparedetailed design specifications to notifyaddresses. Thos allows for impelmenting the trueintegration of display and control features, increasing the work efficiency greatly, andreducing the number of processes significantly.

VersionUp

Universal File Format SupportReduces data Duplication

Text

DXF

CSV (chart) WAV (sound)

RTF

BMP

Screen Data from all previous GP Series can be converted to the latest models, also

G P S E R I E S

1 5


32

bit

RIS

C C

PU

PO

WE

RFieldbus Network and Peripherial Connections

Direct Connection to Field Network

[Profibus-DP]Profibus-DP I/F Unit (GP070-PF11)

[DeviceNet]Device Net Unit (GP070-DN41)

[Interbus]Interbus Unit (GP070-IB41)

[DeviceNet]Device Net Unit (GP070-DN41)

[CC-Link]CC-Link I/F Unit (GP070-CL11)

[Ethernet]GP Ethernet I/F Unit <10-Base-T>

(GP070-ET41)

Max.Raud RateMax.NodeMax.I/O

[Units Supported]SIEMENSSIMATIC S7-300/400 Series, as well as otherProfibus-DP supporting PLCs.

12Mbps64

IN : 64 WordsOUT : 64 Words


500Kbps64



500Kbps512


Max.Baud RateMax.Node

[Units Supported]Fuji Electric Co., Ltd.MICREX-F Series PLC

500Kbps64


[Units Supported]Mitsubishi Electric Corp. PLCMELSEC A SeriesMELSEC QnA Series

100Mbps64

IN : 128 BitsOUT : 128 Bits

* The above communication interface modules are only for GP-470 or larger units.

Additional fieldbus Network Units SupportedFieldbus

AB Remote I/O

AB DH+

ModbusPlus

Module *1

QPI-ABR-201

QPJ-ABR-201

QPI-ABD-201

QPJ-ABD-201

QPI-MDP-201

QPJ-MDP-201

GP Model

GP47*/57* series GP470/570, GP477R/577R Series

GP270/370 series


GP270 series


GP270 series

*1 Manufactured by total Control Products, Inc.

G P S E R I E S

1 6


[Peripheral Device Connections]

GP77 Series Standard Features

Direct Connection to Various NetworksCommunication Module Interface

Direct connection to various Feield networksbecomes possible by attaching communicationmodules.

Real-time OperationAuxiliary Input/ Output (AUX)

From the touch panel, you can send informationto the PLC or to machine's DIO I/F in real time.(Touch output: 8 points, system alarm output: 1-puint, buzzer

output: 1-point, remote reset: 1-point)

* Only supported by GP-47* or larger units

Communication whit a host ControllerSerial (SIO) Interfaces

A single cable is all you need for hostcommunication, reducing maintenance time.

Connecting to a color PrinterPrinter interface

You can printout GP screens while in RUNmode. Alarm history data, includingtrigger/recovery times can also be printed.

Screen Data TransferTool Connector

This interface is used for transfering screen datacreatedby GP-PRO/PB Series. Also, you canconnect a bar-code reader to the GP.

PC Screen DataVGA Input Interface

Your PC's VGA screen can be displayed onGP 570 VM unit.

Video Display from Cameras and RecordersNTSC Video Input Interface (3 channels)

NTSC Video images can be displayed in awindow on certain GPs. Window display sizeand position can be changed, in addition tozooming and channel switching, from touchpanel operation or host controller.(Theese features are only supported by GP-570VM unit.)

(Example: GP-675T Rear face)

Communication Module Interface* Only supported by GP-47* or larger units

Auxiliary Input/Output (AUX)DC24V ParallelI/F cable (user made)* Only supported by GP-470 or larger units

Serial Interface RS-232C (Max 15m) RS-422 (max 600m)*host controller connection distances differ

Printer Interface*Only supported by GP-47* or larger units

Tool Connector Data Transfer Cable Memory Loader || Bar-code Reader

(GP-570VM)Connectable Barcode Readers

Make Welcome Design

Touch Type Model 1090

Handheld Type Model 1240

Foxed Type Model 1045

VGA Input Interface (3ch)RGB Cable (commercially available type)

VGAInterface

PCCCD camera, VTR,TV output, etc.

CommunicationModule

Signal TowerBuzzer, etc.

Host Controller

PLC

Single board Computer

PC

Printer

Data Transfer Cable, etc.

Only for GP-570VM unit.

G P S E R I E S

1 7


32

bit

RIS

C C

PU

PO

WE

R

Programless CommunicationConnections with many different types of PLCsthroughout the worldThe direct access method supports 76 protocols for PLCsfrom 25 manufacturers world wide, meeting diverserequirements or customers.

Host controller

PLC

I/Omemorytable

Data inquiry

Response

Connections with Multiple PLCsMulti-link ConnectionsNeither a dedicated device nor a specialprogram ir requiredMultiple GP series units may be directly connected atease to a single host (computer) link unit for PLCs by thedirect access method without using any dedicated deviceor special program.* For multilink connections, it is recommended that our multi-link cable (GP230-IS12-O) or RS-422 terminal bracket conversion adapter (GP070-CN10-O) is used.

Host PLClink unit

RS-422 cable(GP230-IS12-O)

Maximum extended length ofRS-422 cable: Max 600 meters

GP series GP series(up to 16 unitsmay be connected)

Direct Connection with a PLCDirect Connection with the CPUProgramming PortSystem configuration at low costsThe supported protocol allows the GP series unit to be connecteddirectly to the CPU programming port.

* Applicable PLCs: PLC MELSEC A series/QnA series/FX series of MitsubishiElectric Corp.

2-port Adapter IIThis compact adapter allows you touse both the GP series unit and thePLC's peripheral units for the efficienttransfer, monitoring, and debuggingof a PLC program. The direct mode can be selected for high-speed communication. Isolated signals via 2 port Adapter II avoids noise interference to PLC' CPU.

* The GP430-IP10-O and GP430-IP11-O are not applicable* Applicable PLCs: PLC MELSEC A series/QnA series/FX seriesof Mitsubishi Electric Corp.

Connected to a peripheral device

PLCprogrammingsoftware

RS-422 cablefor two-portadapter II(GP070-MDCB11)

GP series

Memory link expansion capability: Multiple GP units may be connected to a single personal computer or microcomputer board. Graphic data can be transferred from the host controller to the GP unit. The transmitted and received data can be checked for errors including those in check sums, CR, LF, ACK and NAK.

PLC

Single-boardcomputer Data

table

Memorytable

Up to 32 GPs may be connected to a single host computer

Barcode reader

[Easy Backlight Replacement]Service personell can easily replace the backlightright on the factory floor, reducing maintenance time.* Not available with GP-570L, GP-H70 and GP377RT Series units.

[IP65f Rating]All GP units are suitable forinstallation in machines usedin wet or dusty areas.(Applies to the front panel ofa unit mounted in a flat panel)* Does not include GP-H70 Series unit.

[Screen Data Exchange]Memory Loader II (GP070-LC01-O)You can transfer GP screen data to an FlashMemory Card via on the Memory Loader II.This allows you to update GP screen datawithout a PC. This device is also handy forduplicating applications.* Prior to using this tool, the GP must be set up.* Please check the version for applicable GP unit.

Connections

Connections with a PLC

GP Maintenence

G P S E R I E S

1 8


Connectable PLCs and temperatur ControllersFanuc

FATEK

Fuji

GE Fanuc Automation

Hitachi

Izumi

Keyence

Koyo / PLC Direct

MatsushitaElectric Industrial

MatsushitaElectric Works

Mitsubishi

Modicon

Omron

ORIM VEXTA

Rockwell

Sharp

Shinko

Siemens(SIMATIC)

Toshiba

Toshiba Machine

Toyota

RKC

Yaskawa

Yokogawa

Yamataka

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series Name

Series NameCPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPU

CPULink

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link

Link Direct Multilink DeviceNet

Ch.O DH+ DH485 Remote I/O

Multilink

DeviceNetMultilink

Direct

Prgm Port 3964/RK512 Profibus MPI Interbus

Multilink Ethernet

1:n

1:n

Direct Multilink

1:n

1:n 1:m n:m EthernetDirect

Direct Modbus Plus (n:m)

Direct

Multilink

Multilink Ethernet CC-Link

Direct

Direct

Direct Multilink

Direct Multilink DeviceNet

Direct

Direct

Direct

FANUC Power Mate (Motion Controller)FANUC Series

FACON FB

MICREX-F

FLEX-PC

Series 90-30

Series 90-70

HIDIC-S10

HIDIC-H

HIDAC ECS10 mini

FA-2

FA-2J

FA-3S

MICRO3

KEYENCE

KOSTAC SGKOSTAC SUKOSTAC SZ�KOSTAC SR

DL-205DL-305DL-405

Pandac 7000

MEWNET

MELSEC-A

MELSEC-F2

MELSEC-FX

MELSEC-QnA

Modbus MasterModbus Slave

884/984

SYSMAC C

SYSMAC CCS1

SYSMAC

SYSMAC CV

SYSMAC CS1

AB SLC500

AB PLC-5

New Satellite JW

SELMART

S5

S7-200

S7-300

S7-400

PROSEC EX

PROSEC T

PROVISOR B

PROVISOR TC200

TOYOPUC-PC2

TOYOPUL-PC3J

CB Series

SR-Mini

Memocon SC

Control Pack

Memocon Micro

PROGIC-8

FACTORY ACE

SDC

Powe Mate-MODEL D16-MC

20MC

F30F50F60F80

F80HF81F120

F120HF120SF200F250F70SNB1NB2NB3NJNS

CPU311/CPU331CPU731/732CPU771/772CPU781/782

2 /2 E4 /4 F

H20H28H40H64

H-200H-252CH-300H-700H-2000H-2002H-4010EH-150

EC-40HRS10min

PF2-CPU1PF2-CPU5MPF2J-CPU1PF3S-CP11PF3S-CP12PF3S-CP13

MICRO3

KZ-300KZ-A500KZ-350

SG-8SU-5/6/6B

SZ-4SR-21/22D2-240D3-330

D4-430/440

P7000-PLC-001P7000-PLC-031HP7000-PLC-031SP7000-PLC-A01

FP3/5FP10(S)

FP1FP-M

FP10SHFP2

FPQ-C32CTFPQ-C16T

A2AA3AA2UA4U

A2U-S1A2US

AZUS-S1AZUSH-S1

A2SHA3UA0J2

A0J2HA1NA2NA3NA3H

A2CJ-S3A1S

A1SHA1SJ

A2CCPUC24F2-20MF2-40MF2-60M

FX0

FX1

FX2

FX2C

FX2N-64MR

FX2NC-32MT

FXON-60MR

A1FX

FX2N

FX2NC-64MR

Q2AQ2A-S1Q2AS

Q2ASHQ2AS-S1

Q3AQ4A

__________884

984 A/B

C20HC28HC40HC120

C120FC200H

C200HSC500

C500FC1000H

C1000HFC2000

C2000HCQM1-CPU11CQM1-CPU42

CPM1-20CDR-ASRM1-C02

CPM2ACS1HCS1G

C200HX-CPU64C200HE-CPU42C200HG-CPU43

C200HX-CPU85-ZC200HX-CPU44C200HG-CPU63

C200HE-CPU42-ZC200HX-CPU64-Z

CV500CV1000CVM1CS1HCS1G

E1 CPU11

SLC-5/01SLC-5/02SLC-5/03SLC-5/04PLC-5/11PLC-5/20PLC-5/30PLC-5/40PLC-5/40LPLC-5/60PLC-5/60L

JW20JW-32CUH

JW50JW70

JW100JW-32CUH1JW-32CUH3

SELMART

90U95U100U115U135U155U

CPU212CPU214

CPU312IFMCPU313CPU314CPU315

CPU315DPCPU413-2DP

EX2000T2ET2NT3

T3HB200CH

B200CUFB200CURM

B200CUFRM

TCCUHTCCUL

PC2L2

PC2JPC3J

CB-100 Z-1021CB-400 Z-1021CB-500 Z-1021CB-700 Z-1021CB-900 Z-1021

H-RAP-A Z-1021

U84U84JU84S

GL40SGL60SGL60HGL70HGL120GL130

CP-9200CP-9200H

CP-9200SHMicro

PROGIC-8 PC01MP930MP920

FA500FAM3

SDC20SDC21SDC30SDC31

SDC40ASDC40BSDC40G

OO

O

T-Link

O

O

OOOOOOOOOOOOOOOOO

O

O

OOOOOO

DirectOOOO

O

OO

OOOOO

O

OOOOOOOOOOOO

O

OOO

O

OO

OOOOOOO

OOO

OO

O

OOOOOOO

OOOO

OOOOOOOO

OO

OO

O

O

OOOO

O

OOOOOOOO

OOOOOOO

O

OOOOO

O

OO

OOOOOOO

OOOOOOOO

OOOOOOOO

OO

O

O

O

OOOO

O

OO

OOOOO

OOOO

O

OOO

O

O

OO

OO

O

OO

OO

O

O

OO

OOOO

OO

OOOOOOOOOOOOO

OOOO

OOOOOOOOOOOOO

O

OOOOO

OO

OOOOOOOOOO

OOO

OOO

OOOOOO

OO

OOOOOOOOO

OOOOOOO

O

O

OOOO

O

OO O

O

OOOOOOO O

O

OOOOOOOO

OOOOOO

OOOOO

OO

OOOOOO O

OOOOOOOOO

OO

O

OO

OOOO

OO

OOOOOO

OOOOOOOOO

O

O

O

O

OO

O

OO

OO

OO O O

OO O O

OOOOOOO

G P S E R I E S

1 9


32

bit

RIS

C C

PU

PO

WE

R

GP-577RT GP-477RE

GP-675T GP-675S

GP-571T GP-570VM GP-570T

GP-570S GP-470E

GP-377S GP-377LGP-377RT

GP-577RS

High Performance Interface GP77 Series

GP77 Series

GP70 Series 9"/10.4"/12.1"

G P S E R I E S

2 0


12.1"

10.4"

9"

6"

5"

GP675TGP675SGP577RTGP577RSGP571TGP570VMGP570TGP570SGP477REGP470EGP377RTGP377SGP377LGP370SGP370LGP270SGP270LGP-H70SGP-H70L

O

O

TC21-24VPSC21-24VP

OEG21-24VP

O�OOOO

SC21-24VPLG21-24VP

OO

O

TC31-24VSC31-24V

EG31-24V

SC31-24VLG31-24V

OO

O

O

OOOOO

CE MarkedUnits

UL/c-UL Approved Units

GP-370SGP-370L GP-H70S GP-H70LGP-270S

GP-270L

GP70 Series 5"/6"

Global Support NetworkPro-face HMI B.V. Scandinavia

Pro-face UK

Pro-face HMI B.V. France

Pro-face HMI B.V. Germany

Pro-face HMI B.V. Italy

Pro-face America Inc.

Digital Electrpnics Corp.

Pro-face Corea Co., Ltd.

Pro-face taiwan Co., Ltd.

Pro-face HMI B.V.

Asia26

NorthAmerica

2

Oceania3

Europe31

G P S E R I E S

2 1


32

bit

RIS

C C

PU

PO

WE

R

Item

Model

Type

Colors

Backlight

Resolution

Nominal Display Area

Attributes

Display Brightness Control

Contrast Control

Language fonts

No.ofChar

Display

8x8 dot font

8x16 dot font

16x16 dot font

Font sizes

Application Memory

Touch Panel (Resistive Film)

Serial

Interfaces

Tool Connector

Auxiliary Input/Output (AUX)

Printer Output

GP577R-TC11GP577R-TC41-24VP GP577R-SC11 GP477R-EG11

GP477R-EG41-24VPGP377R-TC11-24VGP377R-TC41-24V

GP377-SC11-24VGP377-SC41-24V

GP377-LG11-24VGP377-LG41-24V

TFT Color LCD STN Color LCD High Intensity EL TFT Color LCD STN Color LCD Monochrome LCD

64 colors (Tiling patterns make blends of colors possible) Amber 64 colors (Tiling patterns make blends of colors possible) black and white

CCFL (under normaltemperatures and humidity,

lifespan = more than40 000) User replacable

CCFL (under normaltemperatures and humidity,

lifespan = more than25 000) User replacable

_____

CCFL (under normaltemperatures and

humidity, lifespan =more than 50 000)

CCFL (under normal temperaturesand humidity, lifespan = more than

30 000) User replacable.

640 x 480 pixels 640 x 400 pixels 320 x 240 pixels

211.2 mm (W) x 158.4 mm (H) 192mm(W)x120mm(H) 115.2 mm (W) x 86.4 mm (H)

Blink / Reverse Video

4 levels (via touch panel) 2 levels (via touch panel) 4 levels (via touch panel)

_____ 8 levels (via touch panel) ____ 8 levels (via touch panel)ASCII: (Code Page 850) Alphanumeric (Incl. European fonts) *1

Chinese: (GB2321-80 codes) simpliefied Chinese fontsJapanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)

Korean: (KSC5601 - 1992 codes) Hangul fontTaiwanese: (Big 5 codes) traditional Chinese fonts

80 characters per row, 30 rows









Character size: Height and width can be expanded 1, 2, 4 or 8

2MB FLASH EPROM 1MB FLASH EPROM

32x24 Keys / screen; 1 or 2 point touch 32x20 Keys/screen;1or2 point touch 16x12 Keys / screen; 1 or 2 point touch

Asynchronous transmission method: RS-232C/ RS-422Data length: 8/7 bits; 2/1 bits; stop bits: 2/1 bits

Parity: None/ Even/ Odd; Data Transmission Rate: 2400 bps to 115.2 kbps

Asynchronous Transmission Method, TTL level, non-procedural command interface[during screen development] used for transferring application screen data

[during RUN mode] used as Bar-code Reader of built-in 2-port function interface

Touch switch output(inching)System alarm outputBuzzer outputRun output

DC24Vx8 pointsDC24Vx1 pointDC24Vx1 pointDC24Vx1 point

____________

Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent) ____________

Item Model GP377-SC11-24VGP377-SC41-24V

GP377-LG11-24VGP377-LG41-24V

Electrical

Input voltage

Power Consumption

Allowable Voltage Drop

Voltage Endurance

Insulation ResistanceAmbient Operating

TemperatureAmbient Storage

Temperature

Ambient Humidity

EnvironmentalVibration Resistance

Noise Immunity(via noise simulator)

Atmosphere

Rating

Structural

ExternalDimensions

Weight

Cooling Method

AC85V to AC132V 50/60Hz DC20.4V to DC27.6V

50VA or less 50W or less (TVP 20W) 20W or less (TVP 13W)

Up to 20 ms Up to 2 ms

AC 1500V -20 mA 1 minute AC 1000V -10 mA 1 minute (between charging and FG terminals)

Above 10MW at DC500V (between charging and FG terminals) Above 10MW at DC500V(between charging and FG terminals)

Above 20MW at DC500V(between charging and FG terminals)

0ºC to 40ºC 0ºC to 50ºC 0ºC to 40ºC 0ºC to 50ºC 0ºC to 40ºC 0ºC to 50ºC

-10ºC to 60ºC -20ºC to 60ºC

30 to 85% RH(non-condensing)




10 to 25 Hz (X, Y, Z directions 30 minutes each 2G)

Noise voltage: 1200Vp-pPulse length: 1 µs; Arise Time: 1ns

Noise voltage: 1000Vp-pPulse length: 1 µs; Arise Time: 1ns

Must not contain corrosive gas

Equivalent to IP65f (Limited to front face of GP installed in panel)317mm(W)x243mm(H)

x85mm(D)(GP unit only)

274mm(W)x216mm(H)x56.5Dmm(D)(GP unit only)

317mm(W)x243mm(H)x85Dmm(D)(GP unit only)

274mm(W)x216mm(H)x56.5Dmm(D)(GP unit only)

171mm(W)x138mm(H)x57mm(D)(GP unit only)

Less than 3.5 kg (GP unit only) Less than 2.5kg(GP unit only)

Less than 3.5kg(GP unit only)

Less than 2.5kg(GP unit only) Less than 0.95 kg (GP unit only)

Natural air circulation*1 Japanese character input requires the Japanese version screen editor software.

GP577R-TC11 GP577R-SC11 GP477R-EG11 GP577R-TC41-24VP GP477R-EG41-24VP GP377R-TC11-24VGP377R-TC41-24V

Functional Specifications (GP77 Series Units)

General Specifications

G P S E R I E S

2 2


Items Model GP570-TV11 GP675-TC11GP675-TC41-24VP GP675-SC11

Type

Colors

Backlight

Resolution


Features

Contrast Adjustment

Language Fonts

Display

No. ofChar.

Display

8 x 8 dot font

8 x 16 dot font

16 x 16 dot font

Font sizes

Application Memory


Interface

Serial

Tool Connector

Auxiliary Input / Output (AUX)

Printer Output

TFT Color LCD STN Color LCD8 colors (white, red, blue, green, yellow, purple, light blue, black)Tiling patterns make blends of colors possible 64 colors (Tiling patterns make blends of colors possible)

CCFL (under normal temperaturesand humidity, lifespan = 20 000

hours) User replacable

CCFL (under normal temperaturesand humidity, lifespan = 25 000

hours) User replacable

CCFL (under normal temperaturesand humidity, lifespan = 25 000hours) Non-replacable by user

640x480 pixels 800x600 pixels

211mm(W)x158mm(H) 246mm(W)x184.5mm(H)

Blank / Reverse Video

____ 8 levels from touch panelASCII: (Code page 850) Alphanumeric (Incl. European fonts) *1

Chinese: (GB2321-80 codes) simplified Chinese fontsJapanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & ?)

Korean: (KSC5601 - 1992 codes) Hangul fontTaiwanese: (Big 5 codes) Traditional Chinese fonts







Character size: Height and Width can be expanded 1, 2, 4 or 8 times

1MB FLASH EPROM 2MB FLASH EPROM32x24 keys / screen;

1 or 2 point touch 40x50 keys / screen; 1 or 2 point touchAcynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;

Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400 bpsAsynchronous Transmission Method, TTL level, non-procedure command interface

<during screen development> used for downloading application screens<during RUN mode> used as Bar-code Reader interface

Touch Switch Output: DC24Vx8 points; System Alarm Output: DC24Vx1 point; Buzzer Output: DC24Vx 1 pointRUN output: DC24Vx1 point; Remote Reset Input: DC24Vx1 point

Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)

Items Model GP570-TV11

Input Voltage

GP675-TC11GP675-TC41-24VP GP675-SC11

Power Consumption


Voltage Endurance

Insulation Resistance

Operation Temperature

Storage Temperature

Ambient Humidity

Electrical

Environ-mental Vibration Resistance

Noise Immunity(via noise simulator)

Atmosphere

Rating

Structural

External Dimensions

Weight

Cooling Method

AC85 to AC132V 50/60 Hz GP675-TC11: AC85 to AC132V 50/60 HzGP675-TC41: DC19.2V to DC28.8V AC85 to AC132V 50/60 Hz

50VA or less

Up to 20msAC1500V 20mA 1 minute

(between changing and FG terminals)

GP675-TC11: 50W or lessGP675-TC41: 50VA or lessGP675-TC11: Up to 20 msGP675-TC41: Up to 2 ms

GP675-TC11: AC1500V 20mA 1minuteGP675-TC41: AC1000V 10mA 1 minute

(between charging and FG terminals)

50VA or less

Up to 20msAC1500V 20mA 1minute

(between changing and FG terminals)

Above 10MW at DC500V (between changing and FG terminals)

0ºC to 40ºC

-10ºC to 60ºC

30 to 85% RH (non-condensing)

10 to 25 Hz (X, Y, Z directions 30 minutes 2G)

Noise voltage: 1200Vp-p(GP675-TC41: 1000Vp-p) Pulse length: 1 µs Arise time: 1 ns

Must not contains corrosive gas

Equivalent to IP65f (Limited to front face of GP installed in panel)

317mm(W)x243mm(H)x85mm(D) (GP only) 346mm(W)x272mm(H)x81mm(D) (GP only)

Less than 3.5 kg (GP only) Less than 3.8 kg (GP only)

Natural Air Circulation

Items Model GP570-TV11

Display Colors 32768 colors

VideoDisplay

Input ChannelsTransmission Method

Number of Video ScreensColor Control

Special FeaturesInput Signal Method

Input SignalCharacteristics

Synchronous SignalScanning Type

FlickerBrightnessAdjustment

Controls Horizontal Display PositioningVertical Display Positioning

ResolutionDot-clock Range

3 channelsNTSC

1 (size, location and channel are adjustable)tone, brightness anc contrast

still (freezes video display), transparent color settings, and zoomAnalog RGB

TTL level, negative true or positive trueNon-interlaced

8 level4 level

-16 to 15 pixels-8 to 7 pixels

640x480 pixels25.175 MHz +/- 1%

* Japanese character input require the Japanese version screen editor software

Functional Specifications (10.4" and 12.1" Display)


VM Display Specifications

G P S E R I E S

2 3


32

bit

RIS

C C

PU

PO

WE

R

Items Model GP571-TC11

Type TFT Color LCD

GP570-TC** GP-570-SC** GP570-LG** GP470-EG**

Color

Backlight

Resolution


Features

DisplayFunctions

Brightness Control

Contrast Control

Language Fonts

No. ofChar.

Display

8 x 8 dot font

8 x 16 dot font

16 x 16 dot font

Font Size

Application Memory


Interfaces

Serial

Tool Connector

Auxiliary Input / Output (AUX)

Printer Output

STN Color LCD Monochrome LCD High Intensity EL

64 colors (Tiling patterns makeblends of colors possible)

8 colors (white, red, blue, green, yellow, purple, light blue, black)(Tiling patterns make blends of colors possible) black and white Amber (monochrome)

CCFL (under normal temperatures and humidity, lifespan - 20 000 hours) *1User replacable

CCFL (under normal temperaturesand humidity, lifespan - 25 000hours) Non-replacable by user

____

640 x 480 pixels 640 x 400 pixels

211mm(W)x158mm(H) 192mm(W)x120mm(H)


____ 2 levels from touch panel

____ 8 levels from touch panel

ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1Chinese: (GB2321 - 80 codes) simplified Chinese fonts

Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)Korean: (KSC5601 - 1992 codes) Hangul font

Taiwanese: (Big 5 codes) traditional Chinese fonts

80 characters per row, 60 rows 80 characters per row, 50 rows

80 characters per row, 30 rows ?0 characters per row, 25 rows

40 characters per row, 30 rows 40 characters per row, 25 rows

Character Size: Height and Width can be expanded 1, 2, 4 or 8 times

3MB FLASH EPROM 1MB FLASH EPROM

32 x 24 keys / screen: 1 or 2 point touch 32x20 keys / screen;1 or 2 point touch

Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400

Asynchronous Transmission Method, TTL level, non-procedure command interface<during screen development> used for downloading application screens

<during RUN mode> used as Bar-code Reader interfaceTouch Switch Output: DC24Vx8points; System Alarm Output: DC24Vx1point; Buzzer Output: DC24Vx1point

RUN Output: DC24Vx1point; Remote Reset Input: DC24Vx1point

Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)

Items Model

Input Voltage AC85 to AC132V 50/60Hz

Power Consuption

Electrical Allowable Voltage Drop

Voltage Endurance


EnvironmentalSpecifications


Storage Temperature

Ambient Humidity

Vibration Endurance

Noise Endurance

Atmosphere

Rating

StructuralSpecifications

External Dimensions (mm)

Weight

Cooling System

GP571-TC11 GP570-TC** GP570-SC** GP570-LG** GP470-EG**

GP570-*C11: AC85 to AC132V 50/60HzGP-570-*C21/ *C31: DC19.2 to DC28.8V DC19.2V toDC28.8V GP470-EG11: AC85 to AC132V 50/60Hz

GP470-EG21/ EG31: DC19.2 to DC28.8V

50VA or less GP570-*C11: 50VA or lessGP-570-*C21/ *C31: 50W or less 50W or less GP470-EG11: 50VA or less

GP470-EG21/ EG31: 50W or less

Up to 20ms GP570-*C11: Up to 20msGP-570-*C21/ *C31: Up to 2ms Up to 2ms GP470-EG11: Up to 20ms

GP470-EG21/ EG31: Up to 2msAC1500V 20mA 1minute(between changing and

FG terminals)

GP570-*C11: AC1500V 20mA 1minuteGP-570-*C21/ *C31: AC1000V 10mA 1 minute

(between changing and FG terminals)AC1000

GP470-EG11: AC1500V 20mA 1 minuteGP470-EG2124VP/ EG31-24VP:

AC1000V 10mA 1 minute(between charging and FG terminals)

Above 10MW at DC500V (between the wire and ground terminals)

0ºC to 40ºC 0ºC to 50ºC

-10ºC to 60ºC

30 to 85% RH (non-condensing) 20 to 85% RH (non-condensing)

10 to 25 Hz (X, Y, Z directions 30 minutes 2G)

Noise voltage: 1200Vp-p;Pulse length: 1µs;Arise Time: 1ns

Noise voltage: GP570-*C11: 1200Vp-p.GP570-*C21-24VP/ *C31-24VP: 1000Vp-p

Pulse length: 1µs; Arise Time: 1ns

Noise voltage: 1000Vp-p;Pulse length: 1µs;Arise Time: 1ns

Noise voltage: GP470-EG11: 1200Vp-p.GP470-EG21-24VP/ EG31-24VP: 1000Vp-p;

Pulse length: 1µs; Arise Time: 1ns


Equivalent to IP65f (Limited to front base of GP installed in panel)

317mm(W)x243mm(H)x85mm(D) (GP only)274mm(W)x216mm(H)

x56.5mm(D)(GP only)

Less than 3.5 kg (GP only) Less than 2.5 kg (GP only)


1) With GP570-TC21-24VP units that are Rev. E or later, the estimated lifetime of the backlight is 40 000 hours (assuming 24 hour operation). 2) Japanese character input require the Japanese version screen editor software

____

Functional Specifications


G P S E R I E S

2 4


Items Model GP370-SC**-24V*

STN Color LCD

GP370-LG**-24V* GP270-SC**-24V* GP270-SC**-24V* GPH70-SC**-24V GPH70-LG**-24V

DisplayFunctions

No. ofChar.

Display

8 x 8 dot font

8 x 16 dot font

16 x 16 dot font

Application Memory


Function Keys

Interfaces

Type

Color

Backlight

Resolution


Features

Brightness Control

Contrast Control

Language Fonts

Font Size

Operation Switches

Push Button Switch

Serial

Tool Connector

External Outputs

Monochrome LCD STN Color LCD Monochrome LCD STN Color LCD Monochrome LCD

8 colors (white, red, blue,green, yellow, purple, light blue,

black) Tiling patterns makeblends of colors possible

black and white



black and white



black and white

CCFL (under normal temperatures and humidity, lifespan = 20 000 hours)User replacable

CCFL (under normal temperaturesand humidity, lifespan = 25 000hours) Non-replacable by user

320 x 240 pixels

115mm(W)x86mm(H) 96mm(W)x72mm(H) 115mm(W)x86mm(H)


2 levels from touch panel __________

8 levels from touch panel

ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1Chinese: (GB2321 - 80 codes) simplified Chinese fonts

Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)Korean: (KSC5601 - 1992 codes) Hangul font

Taiwanese: (Big 5 codes) traditional Chinese fonts




Character Size: Height and Width can be expanded 1, 2, 4 or 8 times

1MB FLASH EPROM 256KB FLASH EPROM 1MB FLASH EPROM

16x12 keys/screen; 1 or 2 point touch

__________

__________

__________

__________

12

One is located on the back of the case; the otheris the front face's function swithc (OP.) key

Push-Lock (E-Stop) type switch

Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;Parity: None/ Even/ Odd; Data Transmission Rate: 2400-38400 bps

RS-232C Acynchronous Transmission Method, TTL level, non-procedure command interface<during screen development> used for downloading application screens

<during RUN mode> used as Bar-code Reader interfaceDOUT: Two-point Open Controller: 5-24VDC, 50mA max

OP: One-point Controller: 5-24VDC, 50mA maxBuzzer: One-point Controller: 5-24VDC, 0.1-0.3A

Push-Lock Switch: Single B-contact, rated 30VDC, 0.3A

Items Model

DC20.4V to DC27.6V

GP370-SC**-24V* GP370-LG**-24V* GP270-SC**-24V* GP270-SC**-24V* GPH70-SC**-24V GPH70-LG**-24V

Electrical

EnvironmentalSpecifiactions

StructuralSpecifications

Input Voltage

Power Consumption


Voltage Endurance



Storage Temperature

Ambient Humidity

Vibration Endurance

Noise Endurance

Atmosphere

Rating


Weight

Cooling System

20W or less (TYP10W) 12W or less (TYP8W) 12W or less (TYP10W)

Up to 2ms

AC1000V 10mA 1 minute (between the live wire and ground terminals) *2

Above 20MW at DC500V (between the live wire and ground terminals)

0ºC to 60ºC 0ºC to 40ºC

-20ºC to 60ºC

20 to 85% RH (non-condensing)

10 to 25 Hz (X, Y, Z dimensions 30 minutes 2G)

Noise voltage: 1000Vp-pPulse length: 1µsArise time: 1ns


Equivalent to IP65f (Limited to front face of GP installed in panel) Equivalent to IP63

171mm(W)x138mm(H)x57mm(D) (GP only) 172mm(W)x127mm(H)x58mm(D) (GP only) 237mm(W)x173mm(H)x52mm(D) (GP only)

Less than 0.9 kg (GP only) Less than 0.8 kg (GP only) Less than 0.87 kg (GP only)


*1 Japanese character input require the Japanese version screen editor software*2 With GPH70-**41-24V untits, the allowable power failure is AC500V, 10mA for 1 minute

Functional Spetifications (Medium Size Display Units)


G P S E R I E S

2 5


32

bit

RIS

C C

PU

PO

WE

R

Optional Items

Item

Item

Item

Item

Item

Item

Item

Catalogcode

Catalogcode

Catalogcode

Catalogcode

Catalogcode

Catalogcode

Catalogcode

Screen Editor SoftwareGP-PRO/PB|||for Windows

2-Way Comunicator Pro-Server withPro-Studiofor Windows

Data Transfer Cable Memory Loader ||(Memory card included)

for PLC commimicationRS-232C Cable (5m)

for PLC commimicationRS-422 Cable (5m)

for GP-H70 SeriesRS-232C Cable (3m)

for GP-H70 SeriesRS-422 Cable (3m)

userful for multi-link connectionRS-422 ConnectorTerminal Exchange Adapter

for easy debuggingMitsubishi PLCA Series/QnA SeriesFX Series2 Port Adapter ||

RS-422 Cablefor 2 Port Adapter ||

direct connection to programming portMitsubishi A Series PLCProgramming I/FCable (5m)

direct connection to programming portMitsubishi FX Series PLCProgramming I/FCable (5m)

direct connection to programming portSiemens S5 Series PLCProgramming I/FCable (5m)

connector typeRS-232C Cablefor GP-H70Series WithD-SUBconnector (3m)

for GP-H70RS-232CConversionAdapter

connector typeRS-422 Cablefor GP-H70Series WithD-SUBconnector (3m)

for GP-H70RS-422ConversionAdapter

CF Card CF Card Front Maintenance Unit Protective Screen Cover

Cover Sheets Backlight Bulbs User's Manual

GPW-PB01M-V40

GP410-IS00-O(some PLCs require a different cable)

PSW-ED01-V20 GPW-CB02 GP070-LD-O

GPH70-C422-OGPH70-C232-OGP320-IS11-OGP23--IS12-O (For Multi-link)

GP070-CN10-O GP070-MD11 GP070-MDCB11

GP000-IS11-OGP430-IP11-OGP430-IP10-O

GPH70-D232 GPH70-AP232-O GPH70-D422 GPH70-AP422-O

GP370-DC10GP070-CFFM10(Under development)

GP077-CF10 (8MB)GP077-CF20 (16MB)

Soft Type Hard Type10 sheets / set 5 sheets / setGP570-COVER-10P GP675-DF10-OGP470-COVER-10P GP570-DF10-OGP570/577-COVER-10P GP470-DF10-OGP470/477-COVER-10P GP570/577-DF10 GP470/477-DF1020 sheets / set 10 sheets / setGP370-COVER-20P GP370-DF10-OGP270-COVER-20P GP270-DF10-O GPH70-DF10-O

GP675S-BL00-MSGP675T-BL10-MSGP570-BL00-MS *1

GP577RT-BL00-MSGP370-BL00-MSGP270-BL00-MS

*1 With GP570-TC21-24VP units that are Rev. E or later, use backlight model: GP577RT-BL00-MS

GP-H70(S/L) GPH70-MM11-STD-ENGGP-270(S/L) GP270-MM11-ENGGP-370(S/L) GP370-MM11-ENGGP-470E GP470/570-MM21-ENGGP-570(T/S/L) GP470/570-MM21-ENGGP-571T GP470/570-MM21-ENGGP-675T GP675-MM21-ENGGP-477R/577R GP477R/577R-MM11-ENGGP-377R GP377R-MM11-ENGGP-377(S/L) GP377-MM11-ENG

G P S E R I E S

2 6


Operation Enviroment for Software


PC

OS Version

Memory

Disk Space

Mouse

Printer

PC

OS Version

Memory

Disk Space

Mouse

Printer

Ethernet

Protocol

Others

IBM Compatible

MS-Windows 95/98/NT

16MB, or higer

30MB minimum

53MB maximum *1

Windows 95/98/NT compatible

Windows 95/98/NT compatible *2

GP-PRO/PB||| Windows Pro-Server with Pro-StudioIBM Compatible

MS-Windows 95/98/NT

16MB, or higer

10MB or higer



10BASE-2/5T

TCP/IP

Ethernet Hub, Ethernet cable

GP-675GP-675S

GP-577RTGP-577RS

GP-571TGP-570VMGP-570TGP-570SGP-570L

GP-477REGP-470E

GP-377RTGP-377SGP-377L

GP-377SGP-370L

GP-270SGP-270L

GP-H70SGP-H70L

331.0(top)

3467.5 81

272

275

(front) (side)

Panel Cut-out

(front) (side)

Panel Cut-out

(front) (side)

Panel Cut-out

(front) (side)(front) (side)

Panel Cut-out

(front) (side)

Panel Cut-out

under 4-R2

259 +1-0

123.

5+1-0

(top)

258

274

216

7.556.5

200

under 4-R2

259+1

-0

201+1

-011

3+0.5

-0

158+0.5-0

under 4-R3

112.

5

585

172

157.5

127

(top) (top)

52

237 MAX68

173

(top)155.5

171

138

557

123.

0

under 4-R3

156+1-0

123.

5

301

(top)

317

243

857.5

227

302+0.5-0.5

228+0

.5-0

.5

under 4-R2

*1 40MB maximum for CD-ROM version

*1 Printers with only Windows drivers cannot be used.

POB 38 FIN-00371 Helsinki, Finlandph. int. +358-9-540 4940fax int. +358-9-541 3541e-mail: [email protected] : www.klinkmann.com

Panel Computer PL SeriesIBM Compatible Industrial Panel Computers

PL-B900 Ñåðèÿ

PL-3700S

PL-X900 ÑåðèÿPL-6700 Ñåðèÿ

PL-5700 Ñåðèÿ

Flat Panel DisplayFP SeriesPanel Displays that can replace your CRT, keyboardand mouse, and save valuable space

FP-570TÄèñïëåé VGA

FP-770T/FP-775SÄèñïëåé XGA

Graphic Logic ControllerGLC SeriesProgrammable Operator Interface with I/Ocontrol features.

GLC300T

GLC100 Ñåðèÿ

Pro-Control ðåäàêòîð

Graphic Panel GP SeriesProgrammable Operator Interface for Industrial Controllers

GP77R ñåðèÿ100 MHz RISC CPU è2 ñïîñîáà ïîäêëþ÷åíèÿ ê ñåòè

GP70 ñåðèÿ32 áèò RISC CPU

GP-PRO/PB IIIÄëÿ WindowsÝêðàííûé ðåäàêòîð

The Family-HMI yhat you can count on

Klinkmann - total solution for HMIWonderware InTouch is with 150.000installations world leading HMI/SCADA PCsoftware. InTouch is part of WonderwareFactorySuite , which offers also IndustrialSQL Server automation database,SuiteVoyager automation internet portal,Terminal erver thin client server, InControlSoftPLC etc.

Klinkmann's development develop interfaceand wireless automation software forvarious automation devices incl.Siemens, ABB, Profibus, Interbus and thernet. Klinkmann software is used inover 60 countries araound the world.

32 bit RISC CPU POWERmedia.klinkmann.ee/ee-files/ProFace.pdf · Reduces oveall debugging and maintenance time Data transfer is twise as fast The GP77R's blistering 115.2 Kbps* speed

Documents