Form 30HXC-8SB Replaces: 30HXC-7SB 30HXC-8SB Printed in U.S.A. 2-03 Catalog No. 513-00003 © Copyright 2003 Carrier Corporation • Syracuse, New York 13221 30HXC076-271 WATER-COOLED LIQUID CHILLER — PERFORMANCE DATA — CERTIFIED DIMENSION PRINTS — SOUND ENCLOSURE DIMENSION PRINT — FIELD WIRING DIAGRAM
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Form 30HXC-8SB Replaces: 30HXC-7SB
30HXC-8SB
Printed in U.S.A. 2-03 Catalog No. 513-00003
© Copyright 2003 Carrier Corporation • Syracuse, New York 13221
30HXC076-271
WATER-COOLED LIQUID CHILLER
— PERFORMANCE DATA— CERTIFIED DIMENSION PRINTS— SOUND ENCLOSURE DIMENSION
PRINT— FIELD WIRING DIAGRAM
2
Date: Supersedes: 30HXC076-271WATER-COOLED LIQUID CHILLER 30HXC Rev:
-8SB
JOB NAME: LOCATION:
BUYER: BUYER P.O. # CARRIER #
UNIT NUMBER: MODEL NUMBER:
PERFORMANCE DATA CERTIFIED BY: DATE:
DESCRIPTIONPackaged water-cooled liquid chillers are factory wired, piped, and charged with HFC-134a.
FEATURES
Cooler is mechanically cleanable shell-and-tube type with removableheads. It is tested and stamped in accordance with ASME Code for arefrigerant working side pressure of 235 psig (1620 kPa) and a mini-mum water side pressure of 300 psig (2068 kPa) (250 psig [1720 kPa]in Canada).Compressor is semi-hermetic twin screw design with refrigerant gascooled motor and integral oil filter and discharge gas muffler.Complete thermal and electrical protection is provided.Water-cooled condenser is mechanically cleanable shell-and-tube typewith removable heads and is tested and stamped in accordance withASME Code for a refrigerant working side pressure of 235 psig
(1620 kPa) and a minimum water side pressure of 300 psig (2068 kPa)(250 psig [1720 kPa)] in Canada).Each refrigerant circuit includes oil separator, high side pressure reliefdevice, liquid and discharge line shutoff valve, filter drier, moistureindicating sight glass, expansion valve.Microprocessor control includes keypad, system status (includingtemperatures, pressures and % loading) and the alarm conditions.Automatic circuit lead/lag.Capacity control based on leaving chilled water temperature withreturn water temperature sensing.7-day time scheduling of pump(s) and chiller.
PERFORMANCE DATA
UNIT:
Capacity ________________________________________________
Compressor Input Power ________________________________kW
Unit Input Power ______________________________________kW
Minimum Capacity % ___________________________________%
EER ___________________________________________________
Weight _________________________________________________
COOLER:
Cooler Fluid _____________________________________________
Entering Fluid Temperature _________________________________
Leaving Fluid Temperature _________________________________
Flow Rate _______________________________________________
Pressure Drop ____________________________________________
Fouling Factor ___________________________________________
CONDENSER:
Condenser Fluid _________________________________________
Entering Fluid Temperature ________________________________
Leaving Fluid Temperature ________________________________
Flow Rate ______________________________________________
Pressure Drop ___________________________________________
Fouling Factor __________________________________________
Total Heat Rejected ______________________________________
ELECTRICAL DATA
Power Supply to Unit _____________Volts_________Ph ______ Hz
Power Supply to Control Circuit ____Volts_________Ph ______ Hz
Minimum Amps_____________________________________Amps
Maximum Fuse Amps ________________________________Amps
Control Circuit Fuse Amps_____________________________Amps
Maximum Instantaneous Current Flow ___________________Amps
FACTORY-INSTALLED OPTIONS FIELD-INSTALLED ACCESSORIES
� ___________________________________________________
� ___________________________________________________
� ___________________________________________________
� ___________________________________________________
� __________________________________________________
� __________________________________________________
� __________________________________________________
� __________________________________________________
3
CU
T A
LON
G D
OT
TE
D L
INE
CU
T A
LON
G D
OT
TE
D L
INE
CE
RT
IFIE
D D
IME
NS
ION
PR
INT
4
CE
RT
IFIE
D D
IME
NS
ION
PR
INT
5
CU
T A
LON
G D
OT
TE
D L
INE
CU
T A
LON
G D
OT
TE
D L
INE
CE
RT
IFIE
D D
IME
NS
ION
PR
INT
6
CE
RT
IFIE
D D
IME
NS
ION
PR
INT
7
CU
T A
LON
G D
OT
TE
D L
INE
CU
T A
LON
G D
OT
TE
D L
INE
SO
UN
D E
NC
LO
SU
RE
DIM
EN
SIO
N P
RIN
T
8
FIE
LD
WIR
ING
DIA
GR
AM
Related Documents
