B L O O R S T R E E T W E S T T 75 PVC T C d it 1 B BLOOR STREET WEST HURON STREET MADISON AVENUE 322 King St W, 3rd Fl Toronto, ON, Canada M5V 1J2 416.977.5104 Project No. Scale Plot Date Project North True North Copyright is that of the Architect. Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information resulting from subsequent reproduction of the original drawing. GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work. 2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply. 3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect. 4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted. 5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction. 6. These documents are not to be used for construction unless specifically noted for such purpose. Rev. Date Issued Project 12/21/2017 COVER SHEET 1645 1 : 1000 A0‐0 300 BLOOR STREET W & 478 HURON STREET Sheet Number Sheet Name L1‐01 SITE PLAN A0‐01 STATISTIC SUMMARY A0‐02 SITE SURVEY A2‐00 BASEMENT & GROUND LEVELS A2‐01 RESIDENTIAL AMENITY ‐ MEZZ 01 & BSUC, MARKET TENANT, MEZZ ‐ L02 A2‐02 BSUC, MARKET TENANT, P1 PARKING ‐ L03 & P2 PARKING A2‐03 MARKET TENANT, P3 PARKING ‐ L04 & P4 PARKING A2‐04 BSUC TENANT ‐ L05 & L06‐L08 A2‐05 RESIDENTIAL AMENITY ‐ L09 & RESIDENTIAL ‐ L10 A2‐06 RESIDENTIAL ‐ L11‐L30 & L31‐L36 A2‐07 RESIDENTIAL ‐ L37‐L38 & MECHANICAL PENTHOUSE A2‐08 ROOF PLAN A5‐01 SOUTH & WEST ELEVATIONS A5‐02 NORTH & EAST ELEVATIONS A5‐11 E/W BUILDING SECTIONS A5‐12 N/S BUILDING SECTIONS A9‐00 RENDERINGS 300 BLOOR STREET WEST & 478 HURON STREET DRAWING LIST OWNER AND CONSULTANT LIST CONTEXT PLAN DEVELOPER Collecdev 20 Eglinton Ave. W, #1700 Toronto, ON M4R 1K8 T: 416‐640‐6000 Northrop Development Inc. 6600 Goreway, Dr, Mississauga, ON L4V 1S6 T: 416 231 2077 HERITAGE AND CONSERVATION ERA Architects Inc. 10 St. Mary Street, #801 Toronto, ON M4Y 1P9 T: 416‐963‐4497 CIVIL ENGINEERING Cole Engineering Group Ltd 70 Valleywood Dr, Markham, ON L3R 4T5 T: 905‐940‐6161 NOISE AND VIBRATION Aercoustics Engineering Ltd 1004 Middlegate Rd., #1100 Mississauga, ON L4Y 1M4 T: 416‐249‐3361 CODE CONSULTANT Jensen Hughes 2150 Islington Ave., #100 Toronto, ON M9P 3V4 T: 416‐762‐3808 ARCHITECT KPMB Architects 322 King St W, 3rd Floor Toronto, ON M5V 1J2 T: 416‐977‐5104 LANDSCAPE ARCHITECT Scott Torrance Landscape Architect 219 Dufferin St., #100C Toronto, ON M6K 3J1 T: 416‐696‐8686 TRANSPORTATION BA Consulting Group Ltd 45 St.Clair Ave W, Toronto, ON M4V 1K9 T: 416‐961‐7110 STRUCTURAL ENGINEERING RJC Engineers 144 Front St. W, #500 Toronto, ON M5J 2L7 T: 416‐977‐5335 SHORING Isherwood Geostructural Engineers 3100 Ridgeway Dr., #3 Mississauga, ON L5L 5M5 T: 905‐820‐3480 PLANNING Bousfields Inc. 3 Church St., #200 Toronto, ON M5E 1M2 T: 416‐947‐9744 WIND Novus Environmental Inc. 150 Research Ln, Guelph, ON N1G 4T2 T: 226‐706‐8080 SOIL AND ENVIRONMENTAL WSP Canada 51 Constellation Ct, Toronto, ON M9W 1K4 T: 416‐798‐0065 M&E ENGINEERING Smith + Andersen 4211 Yonge St, North York, ON M2P 2A9 T: 416‐487‐8151 ENERGY STRATEGY Footprint 4211 Yonge St., #500 Toronto, ON M2P 2A9 T: 416‐218‐7025 SCALE 1:1000
18
Embed
300 BLOOR STREET WEST & 478 HURON STREET · 75 PVC T C d it 1 B BLOOR STREET WEST MADISON AVENUE HURON STREET 322 King St W, 3rd Fl ... A2‐06 RESIDENTIAL ‐ L11‐L30 & L31‐L36
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BLOOR STREET WEST
T
75 P V C T C d it
1B
BLOOR STREET WEST
HURO
N STRE
ET
MAD
ISON AV
ENUE
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
PLANNINGBousfields Inc.3 Church St., #200Toronto, ONM5E 1M2T: 416‐947‐9744
WINDNovus Environmental Inc.150 Research Ln, Guelph, ONN1G 4T2T: 226‐706‐8080
SOIL AND ENVIRONMENTALWSP Canada51 Constellation Ct, Toronto, ONM9W 1K4T: 416‐798‐0065
M&E ENGINEERINGSmith + Andersen4211 Yonge St,North York, ONM2P 2A9T: 416‐487‐8151
ENERGY STRATEGYFootprint4211 Yonge St., #500Toronto, ONM2P 2A9T: 416‐218‐7025
SCALE 1:1000
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
Rev. Date Issued
Project
12/21/2017
STATISTIC SUMMARY
1645
A0‐01
300 BLOOR STREET W &478 HURON STREET
**** A total of 156 Parking Spots will be provided, 108 for Residential, 48 will be distributed between Short‐term Residential, Commercial, Church, and Car Share.**Place of Worship seat count required to calculate required parking as per City of Toronto Zoning By‐Law No. 438‐86, using 277 as currently indicated in plan* Parking Rate for Office needs to be calculated from Net Floor Area, for estimating purposes, GFA is being used, Actual number will be lower*Place of Worship assumption there is fixed seating, using ground level only as designated "worship area"* Interior Floor Area of the Retail component does not exceed 1.0 lot size, therefore no parking required3 GFA used calculated according to City of Toronto Zoning By‐law No. 569‐20132 Rate requirements calculated as per the City of Toronto Zoning By‐Law No. 438‐861 Rate requirements calculated as per the City of Toronto Zoning By‐Law No. 569‐2013, Policy Area 1
Suite Type No. of Suites Parking Rate 1 Parking Rat... Req'd Parkin... Req'd Parki... Type Area (m2) / Suite Count Parking Rate 1 Parking Rate 2 Req'd Parkin... Req'd Parkin...Residents' Car Parking Requirements Non‐Resident Car Parking Requirements
Retail Residential Mrkt Tenant BUSC Tenant Church Total Retail Residential Mrkt Tenant BUSC Tenant Church TotalGross Constructed
Area (GCA)Gross Floor Area (GFA) as per 569‐2013 Gross Floor Area (NRGFA +RGFA) as per 438‐86
Project Area Breakdown (m2)
2 Floor Heights are measured from grade at Bloor Street (geodetic el. 114.80 m) to top of floor levels1 Building Height is measured from Grade as defined above
Proposed Building Heights (m) 134.7M
10 Grade (City of Toronto Zoning By‐law No. 141‐2005) Geodetic el. 114.80 m9 Sustainability Target TGS TIER 28 Coverage (Area at Grade, m2) 2,5217 Total Building GFA (m2) 35,4736 Lot Area (m2) 3,6355 Zoning Designation4 City of Toronto Zoning By‐Law No. 438‐86 as amended3 Applicable Zoning By‐Laws City of Toronto Zoning By‐Law No. 569‐2013 as amended2 Municipal Address 300 BLOOR WEST, TORONTO, ON M5S 1W31 Legal Address 300 BLOOR WEST, TORONTO, ON M5S 1W3
3 0 0 B L O O R W E S T : S T A T I S T I C A L S U M M A R Y
1 As defined in Green Roof By‐lawArea of green roof provided: 271
Available roof area(Total ‐ Deductions): 452
Tower floor plate abovepodium < 750 m2 826
Required OutdoorAmenity Space 331
Residential Private terraces 3,242Areas designated for renewable energy... 0
Total Roof Area (s) 4,851Req'd Coverage of Available Roof Space 60%Gross Floor Area 1 35,473
Required Proposed (m2)Calculation of Required Green Roof Area (m2)
3 Maximum bin sizes: Recycling: 4.6 m3 (6 yd3), Garbage: 4.6 m3 (6 yd3), Organics: 2 m3 (3 yd3).2Assumes Pick‐up once/week.1 Requirements calculated as per the City of Toronto Requirements for Garbage, Recycling and Organics Collection Service (May, 2012).TotalGarbage binsRecycling totersCommercial Garbage and Recycling Provided
Total 16 100 16 100Organics: 1 bin / 100 suites 3 3Garbage: 1 bin / 40 suites 7 7Recycling: 1 bin / 50 suites 6 6Residential Garbage and Recycling Bins 3 Room Size (m2) Bins 3 Room Size (m2)
2 Requirements calculated as per the City of Toronto Zoning By‐Law No. 438‐86, Section 4(5), Schedule 1.1 Rate requirements calculated as per the City of Toronto Zoning By‐Law No. 569‐2013Type 'G' 1 0 1Type 'C' 1 1 2Type 'B' 0 0Type 'A' 0 0Loading Retail Residential Commercial Church Retail Residential Commercial Church Total Req'd. 1 Total Req'd. 2
Req'd Loading Spaces 1 Req'd Loading Spaces 2 With SharingProvided
Loading3 Calculation of bicycle parking must be rounded up to the next whole number in the event of a fraction2 Requirements calculated as per the City of Toronto Green Standard (v. 2.0, January 2014), Tier 2 (Bicycle Zone 1).1 Requirements calculated as per the City of Toronto Zoning By‐Law No. 569‐2013 (Bicycle Zone 1), areas used for non‐residential occupancies are to be Interior Floor Area,for estimating, GFA is used
I CERTIFY THAT:THE FIELD WORK WAS COMPLETED ON DECEMBER 19, 2011
PLAN OF TOPOGRAPHY OF
LOTS 1 AND 46AND
PART OF LOT 2REGISTERED PLAN M-2CITY OF TORONTO
DRAWN BY: CHECKED BY: REFERENCE NO.:
CBB
FILE:$FILE$
$DATE$
F: (705) 739-6771
DATED:
PLOTTED:
T: (705) 739-6770 www.jdbarnes.com565 BRYNE DRIVE, UNIT E, BARRIE, ON L4N 9Y3
COLIN B. BOGUE
TSH 11-22-228-00-A (TOPO)
JANUARY 6, 2012
DENOTES SINGLE CATCHBASIN
DENOTES BREATHER VALVE
DENOTES HANDWELL
DENOTES HYDRO MANHOLE
DENOTES MANHOLE
DENOTES TELEPHONE MANHOLE
DENOTES HYDRO POLE
DENOTES LIGHT STANDARD
DENOTES PARKING METER
DENOTES POLE
DENOTES
DENOTES
DENOTES FIRE HYDRANT
DENOTES WATER KEY
DENOTES WATER VALVE
DENOTES INTERLOCKING BRICK
C/L OF ROAD
C/L
OF
ROAD
CURB
CUT
CURB CUT
CURB
CUT
DISTANCES ON THIS PLAN ARE GROUND AND CAN BE CONVERTED TOGRID BY MULTIPLYING BY THE COMBINED SCALE FACTOR OF 0.99988272
NOTESBEARINGS ARE GRID, DERIVED FROM SPECIFIED CONTROL POINTS (SCPs)02019660303 AND 02019751023, MTM ZONE 10, NAD27 (ORIGINAL).
SIBIBWITMEASJDB
DENOTES HORIZONTAL CONTROL MONUMENT
DENOTES SURVEY MONUMENT FOUND
DENOTES SURVEY MONUMENT SET
DENOTES STANDARD IRON BAR
DENOTES IRON BAR
DENOTES WITNESS
DENOTES MEASURED
DENOTES J.D. BARNES LIMITED
DENOTES PLAN 66R-19523
DENOTES PLAN 66R-14936
DENOTES PLAN BA 2084
DENOTES PLAN BA 2085
DENOTES PLAN R-3681
DENOTES PLAN 66R-12977
DENOTES PLAN 63R-3306
DENOTES PLAN 66R-7654
DENOTES REGISTERED PLAN M-2
DENOTES DEED DESCRIPTION ON PIN 21212-0059
DENOTES DEED DESCRIPTION ON PIN 21212-0061
DENOTES DEED DESCRIPTION ON PIN 21212-0062
P1P2P3P4P5P6P7P8P9
D1D2D3
INTEGRATION DATA
POINT ID EASTING NORTHING
COORDINATES CANNOT, IN THEMSELVES, BE USED TO RE-ESTABLISHCORNERS OR BOUNDARIES SHOWN ON THIS PLAN.
SCP 02019660304
SCP 02019751023
SCP 02019660303
312 722.800 4 836 126.126
312 621.690 4 836 117.017
312 645.996 4 836 386.066
INTEGRATION DATA
POINT ID EASTING NORTHING
COORDINATES CANNOT, IN THEMSELVES, BE USED TO RE-ESTABLISHCORNERS OR BOUNDARIES SHOWN ON THIS PLAN.
SCP 02019660304
SCP 02019660308
SCP 02019660310
312 738.644 4 836 348.230
312 891.513 4 836 394.472
312 743.818 4 836 829.743
SPECIFIED CONTROL POINTS (SCPs): MTM ZONE 10, NAD83 (CSRS).
COORDINATE VALUES ARE TO AN URBAN ACCURACY IN ACCORDANCE WITHSECTION 14 (2) OF O.REG 216/10.
SPECIFIED CONTROL POINTS (SCPs): MTM ZONE 10, NAD27.
COORDINATE VALUES ARE TO AN URBAN ACCURACY IN ACCORDANCE WITHSECTION 14 (2) OF O.REG 216/10.
LEGEND
BOUNDARY IS COMPILED AND NOT VERIFIED BY FIELD MEASUREMENTS
0.05 DIA
0.09 DIA
0.02 DIA
0.02 DIA
gas line
0.26 DIA
0.18 DIA
0.35 DIA
0.15 DIA
0.37 DIA
0.40 DIA
0.25 DIA
0.50 DIA
0.30 DIA
0.45 DIA
0.25 DIA
0.25 DIA
0.25 DIA
0.10 DIA
0.38 DIA
0.37 DIA
0.1 DIA
0.1 DIA
0.10 DIA
0.17 DIA
0.60 DIA
06. DIA
0.40 DIA
0.40 DIA 0.70 DIA
0.40 DIA
0.40 DIA
0.25 DIA
FF=115.63
spk
0.6 DIA 0.2 DIA
0.5 DIA
HP
HP
HP
HP
HMH
HMH
HP
WV
WV
WV
HWK
H
WK
WV
TMH
TMH
TMH
HW
HW
BV
BV
HW
114
.86
116
.28
116
.42
116
.28
114
.52
115
.59
114
.57 1
14.57
114
.60
114
.62 1
14.76
114
.65 1
14.66
114
.68
114
.81 1
14.7
2
114
.72
114
.73
114
.72
114
.73
114
.83
114.8
4
114
.83
114
.82
114
.80
114
.79
114
.77
114
.73
114
.70 1
14.72
114
.76
114
.83 1
14.85
114
.87
114
.86
114
.80
114
.90 1
14.97
114
.80
114
.81
114
.83
114
.83
114.82
114
.85
114
.95 114.87
114
.92 114
.93 1
14.94 1
14.9
1
114
.91
114
.96
114.8
7
114
.94
114
.82 114
.83
114
.89
114
.91 1
14.83
114
.80
114
.78 1
14.82
114
.91
114
.88 1
14.78
114
.75
114
.87
114.8
1 1
14.71
114
.75
114
.78
114
.79
114
.80
114
.80
114
.80
114.74
114.73
114
.80 1
14.84
114
.73
114
.69
114
.71
114
.77
114
.82
114
.77
114
.79
114
.83
114.69
114
.76 114
.73
114
.74
114
.78
114
.75
114
.76
114.76
114
.80 1
14.74
114
.75
115
.00
115
.13 1
15.20
115
.23
115
.16
115
.20
115
.32 1
15.29
115
.43 1
15.36
115
.44
115.52
115
.56 1
15.56
115.53
115.46
115
.39
115
.45
115
.30
115
.32
115
.20
115
.18
115
.24
115
.16
115
.06
114
.93
114
.91
114
.89
114.88
114
.79 1
14.75
114
.74 114
.78
114
.90
115
.01
115
.10 1
15.21
115
.26
115
.36
115
.43 1
15.44
115
.57
115
.55
115
.38
115
.47
115
.34
115
.38 115
.38 1
15.35
115
.36
114
.82 1
14.95
115
.09
115
.20
115
.33
115
.43
115
.48
115
.58
116
.10
115
.62
115
.53
115
.50
115
.51
115
.29
115
.22
115
.24
115
.15
115
.07
114
.96 114
.97
115
.08 1
15.18
115
.27 1
15.2
4
115.32
115
.38
115
.50 1
15.55
115
.57
115
.51
115.55
115
.60
115
.73 1
15.77
115
.80
115
.71
115
.53 115
.70
115
.62
115
.63
115
.58
115
.58 1
15.55
115
.50 115
.36
115
.25 115
.42
115
.46
115
.36 1
15.32
115
.29 1
15.22
115
.27
115
.15 1
15.06
115
.04
114.72
114.7
6 114
.76
114
.74 1
14.84
114
.96
115
.08 1
15.2
1
115
.31
115
.38
115
.34 1
15.36
115
.34
115
.50
115
.53
115
.66 1
15.63
115
.64
115
.63 1
15.57
115
.48
115
.55
115
.51 115
.40 1
15.34
115
.46 1
15.34
115.2
6
115
.33 1
15.23
115
.15
115
.04
115
.11
115
.05
114.92
114
.71
115
.30
115
.42
115
.51 115
.53
115
.61 1
15.62
115
.73
115
.73
115
.74
115
.84
115
.78
115
.84
115
.81
115
.87
115
.85
115
.80
116.28
115
.90
115
.65 1
15.80
115
.65
115
.66 1
15.58
115
.51
115
.67
115
.63
115
.79
115
.80
116
.41 1
16.41
115
.82
116
.09
115
.73
116
.06 1
15.65
115
.61
115
.56
115
.64 115
.69 115
.78
115
.70
115
.80
116
.01
115
.77
115
.47
115
.30
115.2
5 1
15.05
115
.54 115
.88
115
.90
115
.90
116.4
0 116.4
0 1
16.37
116
.37
116
.37
116
.03 1
16.00
115
.99
116
.01
116
.01
115
.86
115
.80
115
.74
115
.79
115.17
115
.18 1
15.18
115
.19
115
.17 115
.13
115
.52
114
.59
116
.15
116
.15
115
.92
115
.90
116.07
115
.79
116
.01
115
.91
115
.82 1
15.77
115
.91 1
15.83
115.86
116
.09
116
.03
116
.07
115
.89
115.96
115
.74
115
.86 1
15.8
7
115
.10 1
15.22
115
.39
115
.45
115
.59
115
.40
115
.28
115
.14
115
.36
114
.92
115
.28
115
.26
115
.26 1
14.95
114
.94
114
.94 1
14.96
115
.02 115
.02 1
15.12
115
.36
115
.47
115
.51
115
.52
115
.44
115
.25
115
.05
115
.23
115
.34
115
.18
115
.30 1
15.48
116
.39
115
.59
115
.64
115
.66
115
.66
115
.59
115
.55
115
.51
115
.46
115
.43
115
.43
115
.39
115
.28
116
.51
116
.24 1
16.24
116
.24 1
15.75
115
.69
115.81
115.82
116
.44
116.2
8
116.27
116.28 1
16.45 116
.35
116.3
5
116
.42
116.2
4
116.35 116
.37
116.39
116
.38
116
.24
116.3
4
116
.38
116
.48
116
.29
116
.37 11
6.47
115.96
116
.11 116.29
116
.98
116
.09
116.3
1
116
.39
116
.42 116
.44
116
.43 116.38
116
.36 116
.17
115
.79 1
15.79
115
.56
115
.66
115
.60
115
.64
115.63
115.65
115
.77 11
5.75
115
.67
115
.51
115
.50
115
.54
115
.72 1
15.83
115
.65
116
.48 116
.46
116.41
116
.31 116
.18
116
.19
116
.19
116
.36
116
.27
116
.20
116
.31
116
.42 1
16.3
9
116
.47
116
.46
116
.45
116
.41
116.3
7
116.3
6
116.37
116
.18 1
16.21
116
.18 1
16.17
116
.29
116
.23 116
.18
116.20 116
.31
116
.21
116
.24
116.2
4
116
.33
116
.24
116.2
4
116.3
3
116.4
2
116.2
8
116.27
116
.23 1
16.19
FF 1
02.30
115
.35
114
.75
114.7
9
114.7
6
114.8
0
114
.99
114
.84
114
.81
400.00
401.17
116.34
116.38 116.37
116
.22
116.44
116.43
116.49 116.50 116.35
116
.34
116.42 116.48
116.43
117.11
116.47
116.40
116.42
116.49 116.41 116.05
116.08
116.04 116.09
116
.24
116.2
7 1
16.29
116.36 116.36
116.31
116.31
116.29
116.31
116.31
116.30
116.30
116.32
116.11
116
.29
116.36
116
.34
116.34
116.36
116.35
116.27
116.32
116.33 116.16
116.13
116.08
116.23
116.24 116.18
116
.40
RETAINING WALL
RETA
ININ
G W
ALL
STAIRS
PARKING LINE
PARKING LI NE
PARKING LINE
PARK
ING
LIN
E
SIGNLSP
LS
SIGN
SIGN
SIGN
SIGN
SIGN M
LS
LS
SIGN
SIGN
LS
M
FLOWERBOX
LS
M
P
SIGN
POST
POST
POST
BOARD FENCE
BIKEPOST
BIKEPOST
METAL FENCE
POST
GATE
BOARD FENCE
GUI
DE R
AIL
GAT
E'S
CURB
CU
RB
CURB
CURB
CONC WALK
CONC
WAL
KCO
NC W
ALK
ASPH
ALT
AREA
EDG
E O
F AS
PHAL
T
EDGE OF ASPHALT
EDGE OF ASPHALT
EDGE OF ASPHALT
CONC
WAL
KWA Y
EDG
E OF
ASP
HALT
EDGE OF ASPHALT
EDGE OF ASPHALT
CONCRETEWALKWAY
ILB
ILB
ASPHALT PARKING LOT
ASPHALT
ASPHALT PARKING LOT
PARKING CURB
CONC WALK
3 STOREYBRICK BUILDING
# 11
3 STOREYBRICK BUILDING
# 13
3 STOREYBRICK BUILDING
# 15
3 STOREYBRICK BUILDING
# 17
3 STOREYBRICK BUILDING
# 19
3 STOREYBRICK BUILDING
# 21
3 STOREYBRICK BUILDING
# 478
3 STOREYBRICK BUILDING
# 490
3 STOREYBRICK BUILDING
# 480
SHED
STAIRS
BRICK WALKWAY
DECK
BRIC
KW
ALK W
A Y
GRASS
3.75
3.73
2.22
2.27
20.12(P3, P4&MEAS)
CORNER1.21 E (P4&MEAS)0.39 N (P4&MEAS)
5.34 (MEAS)5.29 (P6)
17 STOREYCONCRETE BUILDING
# 310
CORNER0.09 E (MEAS)0.06 E (P6)
CORNER0.09 E (MEAS)0.01 E (P6)
2.17(MEAS)
1.69
MULTI-STOREYBRICK BUILDING
# 288
FENCE1.70
2.46
(P5,
P66
&SET
)
3.68
(P5,
P6
&MEA
S)
5.44(P2&SET)
0.14 (MEAS)0.17 (P7)
6.02(MEAS)
18.28 1.84
3.492.96
0.18 E (P7&MEAS)
1-STOREYSTONE
CHURCH
1-STOREYSTONE
CHURCH
CORNER0.17 N (MEAS)
3.97
(MEA
S)
4.00
(MEA
S)
3.69 (MEAS)3.73 (P1)
3.66(P1&MEAS)
3.66(P1&SET)
1.65
(P2&
SET)
1.67
(P2&
SET)
3.67
3.66
3.90
2.31
0.67 W0.63 W (P4)
0.68 W0.60 (P4)
0.24
(P10
&MEA
S)
(P10
&M
EAS) 0.
15(P
10&M
EAS)
0.12
(P10
&MEA
S)
0.06
(P10
&MEA
S)
1.65(P10&MEAS)
1.68(P10&MEAS)
CORNER0.99 (P10&MEAS)
0.39(P10&MEAS)
0.37 (MEAS)0.39 (P10)
1.75 (MEAS)1.77 (P10)
6.10 (MEAS)6.08 (P10)
0.74
(MEA
S)0.
67 (P
4)
CORNER0.31 S (P6&MEAS)
0.27 W (MEAS)0.30 W (P10)
1-STOREYCONCRETE
BLOCK
0.24 (MEAS)0.26 (P10)
CORNER0.21 S (P10&MEAS)
1.22 E (MEAS)1.19 (P10)
CORNER0.72 E (MEAS)0.074 (P10)
CORNER0.23 E (P10&MEAS)
CORNER0.65 E (MEAS)0.60 E (P10)
CORNER0.19 W (MEAS)
0.24 W (P10)
6.13 (MEAS)6.09 (P10)
300 BLOOR STREET WEST
1.12
6.77 (MEAS)6.75 (P10)
6.74 (MEAS)
2.37
2.57
(MEA
S)2.
55 (P
10) 2.
42 (P
10&M
EAS)
MHMH
MH
MH
CB
MH
MH
MH
CB
MH
CB
CB
CB
CB
MH
TRAFFIC LINE
TRAFFIC LINE
EDGE OF CONCRETE
EDGE OF CONCRETE
CO
NC
RET
E W
ALKW
AY
CONCRETE PADWITH BELL PHONE
ASPH
ALT
ILB
GRASS
GRASS
GRASS
GRASS
05 5 10 metresSCALE 1 : 200
METRIC DISTANCES AND/OR COORDINATES SHOWN ON THIS PLAN ARE INMETRES AND CAN BE CONVERTED TO FEET BY DIVIDING BY 0.3048.
LAND INFORMATION SPECIALISTS
L I M ITED
SURVEYING
GIS
PLANNING
MAPPING
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
Rev. Date Issued
Project
12/21/2017
SITE SURVEY
16451 : 300
A0‐02
300 BLOOR STREET W &478 HURON STREET
1a 3a2a 4a 5a 6a 7a 8a 9a
F
E
D
C
B
A
OPEN TO ABOVE
EXISTING UNEXCAVATED
ORGAN BLOWER ROOM
EXISTING MECHANICAL
SUPPORT
OUTSIDE FACE OF WALL (TTC)
OUTSIDE FACE OF WALL (TTC)
SETBACK REQUIREMENT
SETBACK REQUIREMENT
POTENTIAL TO EXPAND OVER TUNNEL TO BE EXPLORED(TUNNEL DEPTH INFORMATION REQUIRED)
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
OUTSIDE FACE OF WALL (TTC)2 BED + DEN, 2 B 2 BED + DEN, 2 B
3 BED3 BED
3881
1076
5
BSUC ROOF BELOW
ROOF BELOW
114 333
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
Rev. Date Issued
Project
2017 12 21
NORTH & EASTELEVATIONS
16451 : 300
A5‐02
300 BLOOR STREET W &478 HURON STREET
NORTH ELEVATION1EAST ELEVATION2
1a 3a2a 4a 5a 6a 7a 8a 9a
LEVEL 026.00
LEVEL 0310.50
GROUND0.00
GROUND0.00
LEVEL 0522.06
LEVEL 0522.06
LEVEL 0626.06
LEVEL 0626.06
LEVEL 0730.06
LEVEL 0730.06
LEVEL 0940.01
LEVEL 1043.76
LEVEL 1146.96
LEVEL 1251.26
LEVEL 1354.26
LEVEL 1457.26
LEVEL 1560.26
LEVEL 1663.26
LEVEL 1766.26
LEVEL 1869.26
LEVEL 1972.56
LEVEL 2075.56
LEVEL 2178.56
LEVEL 2281.56
LEVEL 2384.56
LEVEL 2487.56
LEVEL 2590.56
LEVEL 2693.56
LEVEL 2796.56
LEVEL 2899.56
LEVEL 29102.56
LEVEL 30105.56
LEVEL 31109.01
LEVEL 32112.01
LEVEL 33115.01
LEVEL 34118.01
LEVEL 35121.01
MECH P.H.135.16
LEVEL 0415.00
T/O ROOF141.66
LEVEL 36124.01
LEVEL 37127.46
LEVEL 38130.96
4.04.0
7.14.5
4.56.0
OFFICE ROOF38.06
LEVEL 02 (BSUC)3.69
LEVEL 03 (BSUC)7.60
B2 (BSUC)‐3.00
6500
9515
017
950
6.54.2
3.53.5
3.03.0
3.03.0
3.03.5
3.03.0
3.03.0
3.03.0
3.03.0
3.03.0
3.03.3
3.03.0
3.03.0
3.03.0
4.33.2
3.82.0
8.04.0
4.014
.53.9
3.73.0
OFFICE
RES
MECH P.H.
OFFICE
OFFICE
BSUC
LEVEL 0834.06
MARKET TENANT
BSUC TENANT
BSUC
OFFICE
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
BSUC
BSUC
MARKET TENANT
MARKET TENANT
10a
SOUTH ROOF19.50
SOUTH ROOF19.50
PROP
ERTY
LINE
PROP
ERTY
LINE
134.71 BUILDING HEIGHT FROM AVG. GRADE
AVG. GRADE: 115.235
0.5
1a 3a2a 4a 5a 6a
GROUND0.00
P1 LEVEL11.48
P2 LEVEL14.05
P3 LEVEL16.62
P4 LEVEL19.19
LEVEL 0522.06
LEVEL 0626.06
LEVEL 0730.06
LEVEL 0940.01
LEVEL 1043.76
LEVEL 1146.96
LEVEL 1251.26
LEVEL 1354.26
LEVEL 1457.26
LEVEL 1560.26
LEVEL 1663.26
LEVEL 1766.26
LEVEL 1869.26
LEVEL 1972.56
LEVEL 2075.56
LEVEL 2178.56
LEVEL 2281.56
LEVEL 2384.56
LEVEL 2487.56
LEVEL 2590.56
LEVEL 2693.56
LEVEL 2796.56
LEVEL 2899.56
LEVEL 29102.56
LEVEL 30105.56
LEVEL 31109.01
LEVEL 32112.01
LEVEL 33115.01
LEVEL 34118.01
LEVEL 35121.01
MECH P.H.135.16
MEZZ 015.48
T/O ROOF141.66
LEVEL 36124.01
LEVEL 37127.46
LEVEL 38130.96
6500
9515
017
950
1058
060
0035
00
MEZZ 028.48
T/O TTC‐1.02
OFFICE ROOF38.06
6500
4200
3500
3450
3000
3000
3000
3000
3000
3450
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3300
3000
3000
3000
3000
3000
3000
4300
3200
3750
1950
4000
4000
4000
4000
2870
2570
2570
2570
3000
3000
LEVEL 0834.06
OFFICE
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
RES
MECH P.H.
OFFICE
OFFICE
RES AMENITY
RES AMENITY
RES AMENITY
PARKING
PARKING
OFFICE
PARKING
PARKING
RES GROUND1.98
5 6 8 9 11 1221 3 4 7 10 13 14
PROP
ERTY
LINE
PROP
ERTY
LINE
AVG. GRADE: 115.235
0.5
134.71 BUILDING HEIGHT FROM AVG. GRADE
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.
Rev. Date Issued
Project
12/21/2017
N/S BUILDING SECTIONS
16451 : 300
A5‐12
300 BLOOR STREET W &478 HURON STREET
SECTION AT GRID 3A2 SECTION AT GRID 9A1
322 King St W, 3rd FlToronto, ON, Canada M5V 1J2416.977.5104
Project No.ScalePlot Date
Project North True North
Copyright is that of the Architect.Any version of this drawing reproduced by any means from any media without prior written approval of the Architect is to be read for information only. The Architect is not liable for any loss or distortion of information
resulting from subsequent reproduction of the original drawing.
GENERAL NOTES: 1. Drawings are not to be scaled. Contractor will verify all existing conditions and dimensions required to perform the Work and will report any discrepancies with the Contract Documents to the Architect before commencing work.
2. The Architectural Drawings are to be read in conjunction with all other Contract Documents including the Project Manuals and the Structural, Mechanical and Electrical Drawings. In cases of difference between the Consultants' documents with respect to the quantity, sizes or scope of work, the greater shall apply.
3. Positions of exposed or finished Mechanical or Electrical devices, fittings and fixtures are indicated on the Architectural Drawings. Locations shown on the Architectural Drawings shall govern over Mechanical and Electrical Drawings. Mechanical and Electrical items not clearly located will be located as directed by the Architect.
4. Dimensions indicated are taken between the faces of finished surfaces unless otherwise noted.
5. The architect has not been retained for supervision of construction and assumes no responsibility for means, methods and techniques of construction.
6. These documents are not to be used for construction unless specifically noted for such purpose.