C B E TO-92 C B E B C C SOT-223 E NPN General Purpose Amplifier This device is designed as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100 MHz as an amplifier. Absolute Maximum Ratings* T A = 25°C unless otherwise noted *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Symbol Parameter Value Units V CEO Collector-Emitter Voltage 40 V V CBO Collector-Base Voltage 60 V V EBO Emitter-Base Voltage 6.0 V I C Collector Current - Continuous 200 mA T J , T stg Operating and Storage Junction Temperature Range -55 to +150 °C 2001 Fairchild Semiconductor Corporation Thermal Characteristics T A = 25°C unless otherwise noted Symbol Characteristic Max Units 2N3904 *MMBT3904 **PZT3904 PD Total Device Dissipation Derate above 25°C 625 5.0 350 2.8 1,000 8.0 mW mW/°C RθJC Thermal Resistance, Junction to Case 83.3 °C/W RθJA Thermal Resistance, Junction to Ambient 200 357 125 °C/W *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." **Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm 2 . 2N3904 MMBT3904 SOT-23 Mark: 1A PZT3904 2N3904 / MMBT3904 / PZT3904 2N3904/MMBT3904/PZT3904, Rev A
17
Embed
2N3904/MMBT3904/PZT3904 NPN General Purpose …physics.gac.edu/~huber/classes/phy270/SpecSheets/2N3904.pdf · 2N3904 / MMBT3904 / PZT3904 Typical Characteristics Base-Emitter ON Voltage
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CB E
TO-92
C
B
E
BC
C
SOT-223
E
NPN General Purpose AmplifierThis device is designed as a general purpose amplifier and switch.The useful dynamic range extends to 100 mA as a switch and to100 MHz as an amplifier.
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:1) These ratings are based on a maximum junction temperature of 150 degrees C.2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Symbol Parameter Value UnitsVCEO Collector-Emitter Voltage 40 VVCBO Collector-Base Voltage 60 VVEBO Emitter-Base Voltage 6.0 VIC Collector Current - Continuous 200 mATJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C
2001 Fairchild Semiconductor Corporation
Thermal Characteristics TA = 25°C unless otherwise noted
Symbol Characteristic Max Units2N3904 *MMBT3904 **PZT3904
PD Total Device DissipationDerate above 25°C
6255.0
3502.8
1,0008.0
mWmW/°C
RθJC Thermal Resistance, Junction to Case 83.3 °C/WRθJA Thermal Resistance, Junction to Ambient 200 357 125 °C/W
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
**Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.
2N3904 MMBT3904
SOT-23Mark: 1A
PZT3904
2N3904 / M
MB
T3904 / PZT3904
2N3904/MMBT3904/PZT3904, Rev A
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Max Units
V(BR)CEO Collector-Emitter BreakdownVoltage
IC = 1.0 mA, IB = 0 40 V
V(BR)CBO Collector-Base Breakdown Voltage IC = 10 µA, IE = 0 60 VV(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 6.0 VIBL Base Cutoff Current VCE = 30 V, VEB = 3V 50 nAICEX Collector Cutoff Current VCE = 30 V, VEB = 3V 50 nA
SOT-23 Tape Leader and TrailerConfiguration: Figure 2.0
Cover Tape
Carrier Tape
Note/Comments
Packaging Option
SOT-23 Packaging Information
Standard(no flow code) D87Z
Packaging type
Reel Size
TNR
7" Dia
TNR
13"
Qty per Reel/Tube/Bag 3,000 10,000
Box Dimension (mm) 187x107x183 343x343x64
Max qty per Box 24,000 30,000
Weight per unit (gm) 0.0082 0.0082
Weight per Reel (kg) 0.1175 0.4006
Human readableLabel
Human Readable Label
Human Readable Label sample
343mm x 342mm x 64mmIntermediate box for L87Z Option
187mm x 107mm x 183mmIntermediate Box for Standard Option
SOT-23 Unit Orientation
3P 3P 3P 3P
Human ReadableLabel
Customized Label
EmbossedCarrier Tape
Antistatic Cover Tape
Packaging Description:
SOT-23made from a dissipative (carbon fil led) polycarbonateresin. The cover tape is a multilayer film (Heat ActivatedAdhesive in nature) primarily composed of polyester film,adhesive layer, sealant, and anti-static sprayed agent.These reeled parts in standard option are shipped with3,000 units per 7" or 177cm diameter reel. The reels aredark blue in color and is made of polystyrene plastic (anti-static coated). Other option comes in 10,000 units per 13"or 330cm diameter reel. This and some other options aredescribed in the Packaging Information table.
These full reels are individually labeled and placed insidea standard intermediate made of recyclable corrugatedbrown paper with a Fairchil d logo printing. One pizza boxcontains eight reels maximum. And these intermediateboxes are placed inside a labeled shipping box whichcomes in different sizes depending on the number of partsshipped.
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
8mm 7" Dia 7.00177.8
0.0591.5
512 +0.020/-0.00813 +0.5/-0.2
0.79520.2
2.16555
0.331 +0.059/-0.0008.4 +1.5/0
0.56714.4
0.311 – 0.4297.9 – 10.9
8mm 13" Dia 13.00330
0.0591.5
512 +0.020/-0.00813 +0.5/-0.2
0.79520.2
4.00100
0.331 +0.059/-0.0008.4 +1.5/0
0.56714.4
0.311 – 0.4297.9 – 10.9
See detail AA
Dim Amax
13" Diameter Option
7" Diameter Option
Dim AMax
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim Dmin
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mmmaximum
0.5mmmaximum
Sketch C (Top View)Component lateral movement
Typicalcomponentcavitycenter line
20 deg maximum
Typicalcomponentcenter line
B0
A0
Sketch B (Top View)Component Rotation
Sketch A (Side or Front Sectional View)Component Rotation
SOT-223 Tape Leader and TrailerConfiguration: Figure 2.0
Cover Tape
Carrier Tape
Note/Comments
Packaging Option
SOT-223 Packaging Information
Standard(no flow code) D84Z
Packaging type
Reel Size
TNR
13" Dia
TNR
7" Dia
Qty per Reel/Tube/Bag 2,500 500
Box Dimension (mm) 343x64x343 184x187x47
Max qty per Box 5,000 1,000
Weight per unit (gm) 0.1246 0.1246
Weight per Reel (kg) 0.7250 0.1532
SOT-223 Unit Orientation
F852014
F852014
F852014
F852014
F63TNR Label343mm x 342mm x 64mm
Intermediate box for Standard
184mm x 184mm x 47mmPizza Box for D84Z Option
F63TNR Label
LOT: CBVK741B019
FSID: PN2222A
D/C1: D9842 QTY1: SPEC REV:
SPEC:
QTY: 3000
D/C2: QTY2: CPN:N/F: F (F63TNR)3
F63TNR Label sample
F63TNR Label
Antistatic Cover Tape
Customized Label
Static Dissipative Embossed Carrier Tape
Packaging Description:
SOT-223 parts are shipped in tape. The carrier tape ismade from a dissipative (carbon filled) polycarbonateresin. The cover tape is a multilayer film (Heat ActivatedAdhesive in nature) primarily composed of polyester film,adhesive layer, sealant, and anti-static sprayed agent.These reeled parts in standard option are shipped with2,500 units per 13" or 330cm diameter reel. The reels aredark blue in color and is made of polystyrene plastic (anti-static coated). Other option comes in 500 units per 7" or177cm diameter reel. This and some other options arefurther described in the Packaging Information table.
These full reels are individually barcode labeled andplaced inside a standard intermediate box (illustrated infigure 1.0) made of recyclable corrugated brown paper.One box contains two reels maximum. And these boxesare placed inside a barcode labeled shipping box whichcomes in different sizes depending on the number of partsshipped.
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
12mm 7" Dia 7.00177.8
0.0591.5
512 +0.020/-0.00813 +0.5/-0.2
0.79520.2
5.906150
0.488 +0.078/-0.00012.4 +2/0
0.72418.4
0.469 – 0.60611.9 – 15.4
12mm 13" Dia 13.00330
0.0591.5
512 +0.020/-0.00813 +0.5/-0.2
0.79520.2
7.00178
0.488 +0.078/-0.00012.4 +2/0
0.72418.4
0.469 – 0.60611.9 – 15.4
See detail AA
Dim Amax
13" Diameter Option
7" Diameter Option
Dim AMax
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim Dmin
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mmmaximum
0.5mmmaximum
Sketch C (Top View)Component lateral movement
Typicalcomponentcavitycenter line
20 deg maximum
Typicalcomponentcenter line
B0
A0
Sketch B (Top View)Component Rotation
Sketch A (Side or Front Sectional View)Component Rotation
TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and isnot intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices orsystems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can bereasonably expected to result in significant injury to theuser.
2. A critical component is any component of a lifesupport device or system whose failure to perform canbe reasonably expected to cause the failure of the lifesupport device or system, or to affect its safety oreffectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications forproduct development. Specifications may change inany manner without notice.
This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.
This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design.
This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.
Formative orIn Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHERNOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILDDOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTOR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENTRIGHTS, NOR THE RIGHTS OF OTHERS.