1 Prices exclude VAT unless stated otherwise Promotion Code: VST12.09 Promotion Valid from 1st September to 31st December 2012 NEW NEW EOBD DIAGNOSTIC TOOLS 25pc COOLING SYSTEM PRESSURE TEST KITS • 3 New Models. • Colour screens. • I/M Readiness indicator. •Features 5 new adaptors for increased vehicle applications. •Fast and effective way of finding coolant leaks. From £49.95+VAT See page 2 £199.95+VAT See page 16 From £99.95+VAT See page 3 FEATURE PACKED BORESCOPES NEW • Big screens. • Rewind and playback. • Integral memory. • Ø5.5mm - Ø8.5mm probes. 5.5mm
40
Embed
25pcCOOLING SYSTEM PRESSURE TEST KITS EOBD DIAGNOSTIC TOOLS Vehicle Service... · Promotion Code: VST12.09 Prices ... diagnosis with CAN enabled EOBD diagnostic tools. ... • Supplied
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Retrieves vehicle information (VIN, CID & CVN) � � �
Supports CAN and other current EOBD Protocols � � �
Supports the new extended sensor list (SAE J1979 - 2007) �
Reads live ECU/PCM data stream � �
Displays live O2 sensor data � �
Graphing function for live data (96on) �
Read, store and playback live sensor data �
Performs 'modules present' test � �
Print out data via PC �
Update software via the internet � �
Built-in EOBD library lookup �
Diagnostic trouble tips and repair information guide �
Large, easy-to-read LCD display � � �
Backlit screen � � �
Easy-to-use � � �
A faulty component monitored by EOBD does not always turn on the MIL light on the dash board straight away. The vehicle has to run through a drive cycle to pend, then confirm DT Cs, before then turning on the MIL light. Sealey ’s VS8801 and VS8802 have a new feature which, using only one click of a button , can tell the technician which groups of sensors are ready for diagnosis andhave gone through the drive cycle. F or Pre MOT work this is vital and enables the technician toconfirm that the MIL light will not come back on duringthe MOT, creating a fail.
Save time and money, plus take the guess work out of fault finding anddiagnosis with CAN enabled EOBD diagnostic tools. Interrogate your vehicle’s engine and emission faults with our updated range of toolswhich reads and clears both pending and confirmed Diagnostic TroubleCodes (DTC’s). The VS8800 is a new entry level tool which will display onlythe DTC number – the description can be looked up on the CD supplied.The VS8801 and VS8802 feature full colour screens and patented one-click I/M readiness function. Both the larger units will read live datadirect from the vehicles ECU and the VS8802 will allow you to graph thedata enabling fast interpretation of engine per formance. In the eventthat the software requires updating or the EOBD protocols are updated,the VS8801 and VS8802 may be updated using a USB inter face. The results from the VS8802 may be saved out to PC for sharing.
The VS8802 is also loaded with a Tech-Tips data base allowing you a morerounded description of the DTC fault and some ideas about where to looknext to correct the fault – lik e having a professional technician on call24/7.
See the table below for a full list of features and vehicle coverage.
• Model No.VS8801• List Price £95.95
• Model No.VS8802• List Price £199.95
• Model No. VS8800
• List Price £64.95
inc VAT
exc VAT£69.95£83.94
OFFER PRICE
inc VAT
exc VAT£149.95£179.94
OFFER PRICE
inc VAT
exc VAT£49.95£59.94
OFFER PRICE
Tech Tips
Watch live data on the VS8801 and the VS8802. VS8802 will additionallyallow selected data to be graphed.
Diagnostic guidance and tips in the palm of your hand.
• Ideal for the professional tradesman and technician.• High performance pistol grip borescope with 60mm
colour TFT screen.• Ø8.5mm Digital output camera module ensures low-loss
transmission of images to the hand-set and gives greatimage quality with excellent colour balance and contrast.
• Supplied with an AV-out cable and USB cable to allow connection to a PC to capture, store and share imagesand video.
• Kit includes a 45° mirror, hook and magnetic pick-upattachment. Powered by 4 x AA batteries.
• Model No. VS8220• List Price £189.95
• 128Mb Integral memory allows the storage of up to 80 images or 90sec of video on the handset – use a Micro SD card (not included) in the expansion slot to increase your storage capacity if required.
• Record and replay still and video images on the handset or stream live video via
the USB/AV connection.• Features digital zoom control and rotate/flip control of the image – ideal for
use in a tight spot or with a mirror.• Pistol-grip style is perfect for trade use.
• Versatile video borescope with Ø8.5mm x 1000mm semi-rigid probe.• Quickest and most cost effective solution, ideal for the inspection of
engines, machinery, buildings and infrastructure.• Image displayed on a crystal clear, 60mm high resolution colour LCD
display with on-screen horizontal/vertical flip features for use with side-view mirrors.
• CMOS camera with adjustable LED for fine control of light output and clear pictures.
• Suitable for internal inspection of cylinder head bores and vehicle compartments/components.
• Supplied with AV cable for external viewing of image.• Uses 4 x AA batteries supplied.• Model No. VS8196 • List Price £224.95
• Ø5.5mm Digital output camera module ensures low-loss transmission of images to the hand-set.
• Camera capsule is waterproof to 3mtr and has scratch resistant, tempered glass lens.
• Powered by lithium-ion battery pack giving up to 4 hours continuous use.
• Supplied with an AV-out cable and USB cable to allow connection to a PC to capture, store andshare images and video.
• Kit includes a 45° mirror, magnetic pick-up attachment and mains charger.
• Model No. VS8221• List Price £299.95
Still the best qualityScope for the money
inc VAT
exc VAT£139.95£167.94
OFFER PRICE
inc VAT
exc VAT£199.95£239.94
OFFER PRICE
VS8
196
Simple to use oscilloscope that allows obser vation ofconstantly varying signals from vehicle components andsensors. With a bandwidth of 20MHz the unit is suitable fordetecting CAN signals on modern vehicles. Functions includedate hold, record, auto -ranging and USB inter face fordownloading data to PC. This versatile unit also has a built inmultimeter with large digit display and bar graph. Suppliedwith 3-pin UK and 2-pin European charger leads.
Display: 320 x 240 pixel with LED BacklightBandwidth: 20MHzSample Rate: Maximum 80MSa/SInput Impedance: 1MΩMaximum Input: 600VMemory Capacity: 6 WaveformsTrigger Mode: Auto, Nor-mal, SingleMultimeter Modes: Voltage DC & AC, Current DC & AC, Resistance,Capacitance, Continuity, DiodeBattery: 3.7V Lithium PolymerOperating Time: 3hr with BacklightSize: 211 x 140 x 55mmWeight: 700gPC Compatibility:Windows 98, ME, 2000, XP, Win7, Vista
Hand-Held Automotive Single Channel Oscilloscope & Multimeter
Accessories (supplied): Power Supply Lead, Power SupplyPlug Adaptors x 4, Cigar Lighter Power Lead,USB Cable, Attenuators x 4, Calibration Probe, Crocodile Clips; 4 x Red,4 x Black, Standard Probes; 4 x Red, 4 x Black,Back Probesx 5, HT Coil On Plug Extension Leads x 4, HT Couplers x 4,Standard Leads x 4, Earth Cables x 4, Software Disc (Driver & Instructions)Maximum Sample Rate: 200MS/s (Single Channel), 100MS/s(Dual Channels)Bandwidth: 60MHz (-3dB)Gain Range: 10mV - 5V/div @ x1Probe (10mV, 20mV, 50mV,100mV, 200mV, 500mV, 1V, 2V, 5V/div 1,2,5 sequence)100mV - 50V/div @ x10 Probe1V - 500V/div @ x100 Probe10V - 5KV/div @ x1000 ProbeCoupling: AC, DC, GNDImpedance: 1MΩDC Accuracy:+/-3%Input Protection: 35Vpk (DC + Peak AC < 10 kHz, withoutexternal attenuation)Display Mode: Y-T, X-YPredicted Waveforms: 81Timebase Range: 5ns/div - 1000s/div (1-2-5 sequence)Acquisition Mode: Realtime Sampling: 5ns/div - 200ms/divRoll Mode: 500ms/div - 1000s/divBuffer Size: 10K - 16M Points (Single Channel)Type: Edge Trigger, Pulse TriggerMode: Auto, Normal, SingleAutoset: 4Trigger Level: +/-4 DivisionsMeasurements: Vpp, Vmax, Vmin, Vmean, Vrms, Vamp,Vtop, Vbase, Vmid, Positive Overshoot, Negative Overshoot, Cycle Mean, Cycle RMS, Period, Frequency,Positive Pulse Width, Negative Pulse Width, Rise Time (10%-90%), Fall Time (10%-90%), Positive Duty Cycle, Negative Duty CycleMath: Addition, Subtraction, Multiplication, FFT FFT: Rectangular, Hanning, Hamming, Blackman Window Interface: USB2.0 (USB1.1 compatible)Operating System: Window NT, 2000, XP, VISTA, Win7Power: 8.5V DCSize (L x W x D): 224 x 168 x 37mm
One of the most competitively priced, PC -based scopes around and suitable for professional applications. High sample rate, multiple memor y function and 4-channel display make this unit ideal for in-depth analysis of a variety of automotive sensors and components and can be used with any compatible lap-top or PC. The scope also features a comprehensive collectionof standard automotive diagnostic procedures, turning an other wise complexprocess into a click of a button. The system is loaded with specimen waveformsallowing the operator to compare actual results with those expected. The 4-channel function allows multiple components to be compared simultaneously.The TA4000 Can be connected using a LAN cable (supplied) to any PC runningthe appropriate software version. The scope is supplied with a wide selection ofautomotive type test leads, connectors and probes. Supplied in carr y-case.
Automotive Diagnostic Oscilloscope 4 Channel
Visit www.sealey.co.uk for FREE software
Download and Demonstration Video. Try the Software Mode
• Kit includes reservoir, hoses and adaptors for bleeding brake and clutch systemson cars, commercials and motorcycles.
• Model No: VS4022• List Price £79.95
Vacuum Tester & BrakeBleeding Kit
Lambda Sensor Tester/Simulator
FREEMini Digital
Thermometer• Model No. VS906• List Price £17.95
NEW
Relay Circuit DiagnosticTester
• Fast, accurate and safe relay circuit tester that tests the supply, earth and trigger wires within the automotive circuit.
• Simply remove the relay and install the corresponding dummy relay.
• Includes a universal fly lead for non standard relay pin configurations.
• Earth, supply and trigger terminals are displayed as green or red LEDs.
• The tester can also be used to powercomponents by simulating the relay in the on/off positions using the test button.
• Model No. TA130• List Price £179.95
• Features a scope function to visuallytest component signals, with the addedbenefit of maximum/minimum volts, frequency and duty cycle displayed.
• Allows components to be activated in situ or prior to installation.
• The fly lead allows continuity andpolarity testing with a high-contrast colour LCD display giving a 7mmhigh read-out.
• Feature audible and positive/negative voltage indicator and two integral work lights.
• 6mtr Lead connects to the battery supply and reaches to all areas of the vehicle. Includes a cigarettelighter adaptor.
• Model No. PP100• List Price £149.95
0-30V Power ScopeAutomotive Probe
FREECurrent Tester 20A -Standard Fuse• Model No.
TA120• List Price
£21.95
NEW
Infrared Laser DigitalThermometer 12:1
FREE• Model No.
MM20• List Price
£29.95
8 Function Digital Multimeter with Thermocouple
• Features laser pointer, Maximum/Minimum/Average/Differencereadings, data storage and data hold function, high/low alarm setup, auto power off.
• Temperature is displayed on a large 29mm LCD panel with back-lit display for use in low light areas and can be shownin either °C or °F.
• Powered by 9V cell (supplied).• Model No. VS907• List Price £99.95
• Tests Zirconia and Titania lambda sensors and ECU.• Suitable for 1, 2, 3 and 4 wire sensors, heated
and unheated.• LED display shows crossover signal from sensor.• Simulates rich or lean mixture signals to check
ECU response.• Insulation-piercing clip for quick and easy
connection plus, display to confirm wire identity.• Features a low battery indicator and powered
by 9V battery (supplied).• Model No. VS925• List Price £99.95
• Multi-function diagnostic tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.
• Brass-bodied vacuum pump features large, easy-to-read vacuum gauge calibrated in both inches and millimetres of mercury.
12V LED Battery/AlternatorTester with Crocodile Clips• LED Indicators verify condition
of battery and alternator.• Magnetic backing sticks
to metal surfaces forhands-free operation.
• Model No. AK400• List Price £16.95
inc VAT
exc VAT£10.95£13.14
OFFER PRICE
inc VAT
exc VAT£119.95£143.94
OFFER PRICE
12V Battery Drop Tester
• Traditionally styled drop tester for all 12V automotive batteries.
• Applies load across cells and measures output on meter.
• Accurate indication of battery voltage, faulty cell and short circuited cell.
• Model No. BT91/3• List Price £162.95
inc VAT
exc VAT£44.95£53.94
OFFER PRICE
6/12V BatteryDrop Tester
• American style drop tester.• Load applied by internal switchgear - no sparking!• Suitable for 6 and 12V batteries.• Applies load across cells and measures output on meter.• Accurate indication of battery voltage, faulty cell and
short circuited cell.• Model No. BT91/7• List Price £59.95
inc VAT
exc VAT£34.95£41.94
OFFER PRICE
12 Function Digital AutomotiveAnalyser
• Durable bi-composite case and integral standsuitable for the toughest workshop conditions.
• Large, hi-contrast LCD display with 18mm high digital read-out and bar graph.
• Auto-ranging, data-hold, auto-polarity, auto-power-off and low battery display functions.
• Bar graph simplifies lambda sensor testing.
• Supplied with cappedtest probes and K-type thermocouple.
• Model No. TA101• List Price £64.95
14 Function Digital AutomotiveAnalyser with Inductive Coupler
8 Function Digital AutomotiveAnalyser
inc VAT
exc VAT£39.95£47.94
OFFER PRICE
inc VAT
exc VAT£69.95£83.94
OFFER PRICE
• Durable bi-composite case and integral stand suitable for the toughest workshop conditions.
• Large, hi-contrast LCD display with 21mm high digital read-out.
• Unique Test Lead Connection feature.• Includes data hold feature
and low battery display.• Supplied with test probes
and crocodile clips.• Model No. TA200• List Price £59.95
• Integrated circuit, high visibility, backlit, LCD displayand five position stand.
• Fourteen functions including pulse-width measurement for fuel injectors, idle air control motors and electronic transmission control systems.
• Auto-ranging and auto-power-off.• Suitable for AC and DC circuits.• Supplied with test leads, inductive coupler with
adjustable sensitivity, K type temperature probe and operating instructions.
• Model No. TA202• List Price £99.95
6pc Noid Light Set
inc VAT
exc VAT£13.45£16.14
OFFER PRICE
inc VAT
exc VAT£3.95£4.74
OFFER PRICE
• Check fuel injector signal faults fast.• Easy-to-use and fits a wide variety
of injector harnesses.• Applications: GM PFI, Ford
TBI, GEO TBI, Bosch PFI, GM TBI, GM SCPI.
• Model No. VS213• List Price £21.45
Dial Type Battery Fluid Tester
• Tests 6, 12 and 24V batteries.• Composite body and rubber
bulb for workshop durability.• Model No. AK410• List Price £6.45
and accessory set, including 5-function crimping tool with soft rubber grips for comfort and control.
• Model No. AK8904• List Price £54.95
inc VAT
exc VAT£22.95£27.54
OFFER PRICE
inc VAT
exc VAT£27.95£33.54
OFFER PRICE
FREEAutomotive Test Probe• Model No. VS906• List Price £17.95
• Checks for short circuits and bad earths quickly and easily.
• Tests continuity and polarity using flying lead and also indicates voltage (2V to 24V) of system ontest using an LED array.
• Power-up components prior to installation and check in situ function of components and accessories allowing fastproblem diagnosis.
• Features integral work lightwith touch sensitive control.
• Model No. PPVT• List Price £59.95
13-Pin Towing Socket Tester12V - VOSA Approved
Car Fuse Adaptor Lead Sets
• Ideal for use on car and commercialvehicles.
• Fitted with regular Ø4mm banana adaptors found on most scopes and multimeters.
• Maximum Current/Voltage: 20A/48V.
Model No. Range Fuse Type List Price Exc. VAT Inc. VAT
TA120 0-20A - 0-48V Standard £21.95 £12.95 £15.54
TA121 0-20A - 0-48V Mini £21.95 £12.95 £15.54
20A Current Testers
• Ideal for fault-finding on car and commercial vehicle electrical circuits. • Plugs straight into the vehicle's fuse board.
Model No. TA120
Model No. TA121
Model No. Fuse Type List Price Exc. VAT Inc. VAT
TA123 Standard £12.95 £7.95 £9.54TA124 Mini £12.95 £7.95 £9.54
Model No. TA123
Model No. TA124
Coil On Plug Test Extension
• Allows for inductive couplers to be used on engines that have no HT leads to diagnose engine faults.
• Ideal for coil-pack diagnostics on modern engines.• Enables the technician to correctly diagnose a fault
without unnecessary component changing.• Simply plugs in-between the coil-pack and spark plug.• Model No. VS5263• List Price £34.95
FREEWire Piercing Guide Clip
• Model No. TA115• List Price £7.75
• Quick and simple test of 12V 13-pin Euro-type sockets fitted to the rear of the vehicle.
• Features self-test facility to ensure the serviceability of the tool.
• Also tests the 12V continuous live feed, 12V ignition live feed and the reversing lights - not part of the current MOT test, but useful when diagnosing electrical faults.
• Includes 13 to 7 pin adaptor for testingolder wiring systems.
• Model No. TST22• List Price £99.95
• Enables the testing of injectors under pressure.
• Fitted with Ø88mm gauge with rubber bumper reading both psi and Bar.
• Ideal for checking of atomisationpattern and opening pressure.
• Transparent reservoir fitted with fine filter and unit supplied with two injector connection pipes.
Fuel Injection Pressure Test Kit• Comprehensive kit of hoses, adaptors
and fittings for testing the pressure on modern petrol fuel injection systems.
• Fitted with quick couplings and safety valve to prevent inadvertent dischargeof fuel under pressure.
• Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-120psi and 0-8bar.
• Gauge features a hanging hook and suction cup.
• Pressure release valve fitted with long drain hose allows safe recovery of fuel.
• Model No. VSE212• List Price £399.95
inc VAT
exc VAT
OFFER PRICE
£347.94£289.95
Diesel Injection Leak Back MasterKit - Bosch/Delphi/Denso
FREE8 Function Digital Multimeter with Thermocouple
• Model No. MM20
• List Price £29.95
inc VAT
exc VAT£199.95£239.94
OFFER PRICE
inc VAT
exc VAT£9.95£11.94
OFFER PRICE
inc VAT
exc VAT£14.75£17.70
OFFER PRICE
inc VAT
exc VAT£99.95£119.94
OFFER PRICE
Injector Nozzle Tester - Diesel
Fuel FeedPipe Pliers
• Suitable for releasingconnections on in-linefuel line filters.
• Fitted with long handlefor restricted access.
• Model No. VS0458• List Price £22.95
Fuel Filter CapRemoval Tool
• Specialist socket required for the removal of diesel fuel filter fitted to 2.0, 2.2 HDi engines found in some Citroen, Ford, Land Rover, Mitsubishi andVolvo vehicles.
• Model No. VS6426• List Price £15.95
90ltr Stainless SteelFuel Tank Drainer
• Stainless steel fuel drainer with venturi type suction.
• 90ltr Capacity tank suitable for petrol or diesel.
• Supplied with suction tubes and adaptors for breaking into vehicle fuel system.
• CE Certified (971231EC).• Model No. TP201• List Price £1649.95
FREE6kg Dry Powder Fire Extinguisher
• Model No. SDPE06
• List Price £93.95
inc VAT
exc VAT£19.95£23.94
OFFER PRICE
• Popular glow plug sized 3/8"Sq drive Chrome Vanadiumsteel sockets with universal joints for simple replacement.
• Features rubber inserts forretention of plug in socket.
• Socket Sizes: 8, 10, 12mm.• Set includes 75mm
extension bar.• Model No. SX0402• List Price £31.95
• Essential for reintroduction of fuel into fuel pumpfollowing maintenance such as fitting of new diesel filter or following drainage of fuel tank.
• Must be used whenever fuel system is disturbed.
• Model No. VS055• List Price £19.95
4pc 3/8"Sq Drive Diesel Glow Plug Socket Set
• Identifies worn, blocked or inoperative injectors quickly and easily.
• Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.
• Master kit includes range of adaptors to suit Bosch, Delphi & Denso injectors for comprehensive coverage of common rail diesel vehicles.
• Model No. VS2048 • List Price £179.95
NEW
Diesel & Petrol FuelPump Priming Tool
inc VAT
exc VAT£9.95£11.94
OFFER PRICE
• Required for priming injection pump.• Use after diesel filter change, drainage of fuel
tank or any other disturbance of the fuel system.• Supplied with two fuel
• Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors.
• Ball joint allows hammer to be used in confined areas.
• Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector.
• Set of four diesel injector seatcleaners, centring pilot and T-handle.
• Used to clean/decarboniseinjector seats when changinginjectors.
• Helps to avoid blow-back dueto poorly seated injectors.
• Suitable for a wide range of vehicles.
• Model No. VS2055• List Price £119.95
8pc Glow PlugReamer/BaseCleaning Set
FREEAngular Torque Gauge
1/2"Sq Drive• Model No.
VS530• List Price
£16.95
• Quickly removes accumulations of carbon residueinside the cylinder head assisting the installationand effective operation of replacement glow plugs.
• Includes four ream guides which aid the centralisationof the Chrome Vanadium reams.
• Suitable for M8, M10 and M12 threaded glow plugs.• Model No. VS312• List Price £169.95
Cylinder HeadComponentOrganiser
• An essential item for a cylinderhead rebuild.
• Keeps all components neat and tidy as they come offthe cylinder head.
• Saves time and frustration.• Model No. VSR01• List Price £39.95
33pc Glow PlugThread Repair Set
FREE4pc 3/8"Sq Drive DieselGlow Plug Socket Set
• Model No. SX0402• List Price £31.95
• Fast and effective remedy for damage to cylinder head glow plug threads.
• Set includes tools for the precise insertion of threaded inserts into the head and features a unique tap guide system to ensure their correct alignment.
• Includes 4 sizes of threaded adaptors suitable for common sizes of glow plug.
• Model No. VS311• List Price £173.95
Glow Plug Puller Set• A comprehensive set suitable for
removing stubborn glow plugs.• Ideal for removing plugs that
have been unscrewed, but seized, due to residue build upor where the filament has been distorted.
• Quick and effective method, saving time and money.
• Model No. VS313• List Price £124.95
FREE20pc Cleaning &
Decarbonising Brush Set
• Model No. VS1800• List Price £35.95
NEW
• Suitable for the removal and installation of the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
• Specially designed with window, toothed end and M14 pulling force screw.
• Model No. SX0411• List Price £32.45
• Designed to remove the fuelfilter on Vauxhall/Opel vehicles fitted with 1.9CDTi engines.
• Also fits some Alfa Romeo, Fiat and Saab 1.9JTD/TD vehicles.
• Filter housing fits into the plasticholder using a vice, so the key can be used to unscrew thehousing cap without causing damage.
• A comprehensive kit for testing the compression and leakage on both diesel and petrol vehicles.
• Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.
• Includes TDC finder, ideal for use when theengine has no crankshaft timing marks.
• Model No. VSE3156• List Price £389.95
14pc Valve Seat Cutter• Suitable for re-cutting inlet/exhaust
valve seats concentric to the valve guides.
• Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application.
• Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds.
• May be used with feeler gaugesfor high precision work.
• Supplied in storage case.• Model No. VS1480• List Price £135.95
Cylinder Head Stands
• Two support stands which locate into cylinder head via stud holes.
• Also provide clearance between head and workbench for reaming valve guides.
• Model No. VS1555• List Price £28.45
Compression TestersPush-On Type
• Fitted with Ø63mm gauge reading up to 300psi and 20kg/cm2.
• Cone type spark plug connection on straight rigid 130mm extensionaids quick installationon most petrol engines, including motorcycleand small portablepower units.
• A comprehensive set for easy removal offreewhee alternator pulley, either on or offthe vehicle.
• Allows alternator shaft to be held while pulleyretainer is removed.
• Model No. SX403• List Price £124.95
Model No. Size Length List Price Exc. VAT Inc. VAT
VS624 12mm 260mm £44.95 £29.95 £35.94
VS625 14mm 260mm £46.95 £30.95 £37.14
Reverse Action SparkPlug Thread Chasers • Specially designed
to repair damaged, deep-seated spark plug threads on modern engines.
FREESpark Plug Boot
Puller Tongs• Model No. AK865• List Price £4.45
Model No. V
S624
Model No. V
S625
4pc Spark Plug Puller Set - VAG
37pc Bearing & SealInstallation Kit
FREE6 Function Professional
Digital Multimeter• Model No.
TM100• List Price
£37.45
FREESpark Plug Lead
Tool - VAG• Model No. VS5293• List Price £22.95
• Suitable for installation/removalof ignition coils on VAG vehicles.
• Long shafts with composite T-stylehandle for added control and stability.
• Prevents damage to ignition coils whilst allowing faster removal.
• Model No. VS5294• List Price £49.95
Spark Plug Thread Repair Kit
FREE4pc 3/8"Sq Drive Spark
Plug Socket Set• Model No. AK6556• List Price £28.95
NEWFSI Injector Remover/Installer& Service Kit - VAG
FREE• Model No.
MM20• List Price
£29.95
8 Function Digital Multimeter with Thermocouple
• New lightweight design for the installation of bearings without damaging the bearing or housing.
• Contains 3 metal bearing driftsleeves and 34 nylon drifts.
• Can also be used to install oil seals.
• Fits most sizes of bearing andseals found on modern vehicles.
• Model No. VS7024• List Price £249.95
• Suitable for five common sizes of thread.
• Creates a stronger internal thread in soft metals.
• Ideal for repairing damaged or stripped internal threads.
• Protects tapped threads against wear and damage.
• Includes drill bits, thread taps, insert installation and lug breaking tools.
• Model No. TRMK• List Price £109.95
• Comprehensive and time saving kit of spark plug thread repair tools.
• Especially suitable for the repair of deep-seated plug configurations.
• Stepped tap ensures correct alignment of cutter in existing spark plug hole.
• Extension tools allow easy access to the bottom of the plug recess.
• Model No. VS301• List Price £199.95
witheach
FREE6pc Pick & Hook Set Extra-Long
• Model No. AK5215• List Price
£19.95
NEW
• Injector remover/installer and service kit for petrol injectorsfound in VAG vehicles covering 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6 and 4.2L V8 FSI engines.
• Metric graduated, 15 blade, feeler gauge.• Sizes: 0.06 to 0.70mm.• Blade dimensions: 75 x 13mm.• Model No. VS511• List Price £8.95
Universal ClutchAlignment Tool
inc VAT
exc VAT£5.45£6.54
OFFER PRICE
inc VAT
exc VAT£24.95£29.94
OFFER PRICE
inc VAT
exc VAT£9.95£11.94
OFFER PRICE
inc VAT
exc VAT£8.45£10.14
OFFER PRICE
inc VAT
exc VAT£19.95£23.94
OFFER PRICE
inc VAT
exc VAT£14.45£17.34
OFFER PRICE
inc VAT
exc VAT£8.95£10.74
OFFER PRICE
• Nylon components with steel main shaft.• Fits 90% of cars and light vans up to
5tonne gross (not suitable for Minis (A Series)or vehicles with double plate clutches).
• Suitable for front wheeldrive vehicles.
• Supplied with 2 different sized expanding collets.
• Model No. VS010• List Price £15.95
Valve Spring CompressorOHC/OHV/CVH
• Suitable for most small and medium sized OHC enginesand also for general use on OHV and CVH engines.
• Universal jaw with 60-155mm capacity and 160mm throatdepth.
• Model No. VS153• List Price £37.95
FREE2pc Valve Grinder Set• Model No. VS1653• List Price £9.95
Stud Remover& Installer
• Suitable for the removaland installation of various sizes of stud.
• Cam rotates to grip onto the stud for quick and easy use.
• Use with 1/2"Sq driveratchet wrench.
• Model No. VS7232• List Price £12.95
Mechanic'sStethoscope
• Quickly locates the source of engine noise such aspiston slap, worn gears and bearings, damagedvalves, water pump failure and blown gaskets and even dash board squeaks.
• Plastic ear pieces and300mm probe with soundamplifying chamber.
• Model No. AK871• List Price £14.95
FREE3pc Miniature
Brush Set• Model No. AK9791• List Price £3.95
FREE3pc Miniature
Brush Set• Model No. AK9791• List Price £3.95
9pc Gasket Punch Set
• Interchangeable hollow punchset capable of punching holes ingaskets, leather, paper, plastic,wood sheet and other soft materials.
• Model No. AK708• List Price £32.95
26 Blade Offset FeelerGauge - Dual Marked
• Imperial graduated 26 blade feeler gauge.• Sizes: 0.005" to 0.030"• Dual marked in Imperial and Metric.• Blade dimensions 75 x 13mm(45º-15mm offset).• Model No. VS515• List Price £21.95
Triple Leg Glaze BreakerØ50-175mm 75mmMedium Stones
• For removal of heat glaze and carbon deposits on cylinder walls.
• Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm.
• Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm.
• Adjustable spring tension gives finish control.• Model No. VS162• List Price £46.95
inc VAT
exc VAT£29.95£35.94
OFFER PRICE
Model No. Grade Pack Quantity List Price Exc. VAT Inc. VAT
VS1621 Medium 3 £9.75 £6.95 £8.34VS1622 Coarse 3 £9.75 £6.95 £8.34VS1623 Fine 3 £9.75 £6.95 £8.34
Pack of 3 75mmStones
• Application: VS162.Model N
o. VS1621
Promotion Code: VST12.09
Swivel Jaw Filter PliersØ57-120mm Capacity
• Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters.
• Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.
• Capacity: Ø57-120mm.• Model No. AK6417• List Price £44.95
Band Type Oil Filter Wrenches
3/8"Sq Drive Filter Wrench46mm AdBlue-Mercedes
• Designed to remove AdBlue filter housing cap on BlueTec engines, fitted to Mercedes commercial vehicles.
• Model No. SX120• List Price £10.95
inc VAT
exc VAT£6.95£8.34
OFFER PRICE
inc VAT
exc VAT£28.95£34.74
OFFER PRICE
FREE8ltr Oil/Fluid Drain Pan• Model No. DRP01• List Price
£8.45
NEW
30pc Oil Filter CapWrench Set
15pc 3/8"Sq Drive MagneticOil Drain Plug Socket & Key Set
inc VAT
exc VAT£44.95£53.94
OFFER PRICE
inc VAT
exc VAT£95.95£115.14
OFFER PRICE
inc VAT
exc VAT£7.95£9.54
OFFER PRICE
inc VAT
exc VAT£7.95£9.54
OFFER PRICE
inc VAT
exc VAT£54.95£65.94
OFFER PRICE
• Each features magnetic retention to prevent sump plugs from accidently falling into drain pans.
• Suitable for use on engines, gearboxes and back axles.
• Includes application chart.• Contents: Square; 8, 10mm, Hex; 8,
• Traditional style cooling system pressure testing kit. Features five new adaptors increasing the vehicle applications. Suitable for Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki,Toyota, Vauxhall/Opel, Volvo, VW. Also includes non-specific adaptors for other makes.
• Model No. VS0011• List Price £329.95
FREE9pc Hose Clip Removal
Tool Set• Model No. VS1662• List Price £124.95
£239.94
NEW
Brake & Fuel Hose PinchTool - Bar Type
• Suitable for both brake and fuel lines.• Simple, yet effective pinch action with
rounded clamp section to prevent damage to hose lining.
• Metal construction with chromed finish.
• Model No. VS033• List Price £17.95
Refractometer Antifreeze/BatteryFluid/Screenwash
• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology).
• Temperature correctedprism ensures accuracy.
• Eyepiece with adjustable focus.
• Model No. VS005• List Price £99.95
Model No. Type List Price Exc. VAT Inc. VAT
VS4120 Ethylene £21.95 £14.95 £17.94
VS4121 Propylene £21.95 £14.95 £17.94
Antifreeze Testers Twin-Rotor
• Features a temperaturecompensation rotor that automatically adjusts the reading regardless of the coolant temperature.
• Freeze protection level is indicated on the scale indegrees Celsius.
Model No.
VS4120Model N
o.
VS4121
FREEAntifreeze Tester
Tube Type• Model No. AK413• List Price £9.45
• Dramatically reduces cooling system refill time, without mess and without introducing air-locks.
• Model No. VS0042• List Price £85.95
Model No. Application Size List Price Exc. VAT Inc. VAT
VS030 Brake & Fuel Hoses Small £8.25 £5.45 £6.54VS031 Heater Hoses Medium £9.25 £5.95 £7.14VS032 Radiator Hoses Large £12.45 £7.95 £9.54
• Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port.
• Ideal for bikes, cars and car derived vans.• Requires installation onto workshop wall and ducting to expel exhaust gases. • Does not include electrical switch gear.• Ideal for smaller garages and workshops where space is limited.
Model No. Type Motor List Price Exc. VAT Inc. VAT
EFS101 Single Hose 370W - 230V 50Hz £1345.95 £899.95 £1079.94
Petrol Engine Setting/Locking Kit Alfa Romeo, Fiat 1.4 - MultiAir Belt Drive
Petrol Engine Setting/Locking Kit - Fiat, Ford, Lancia 1.2, 1.4 8v Belt Drive
Petrol Engine Setting/LockingKit - Alfa Romeo Twin Spark1.4, 1.6, 1.8, 2.0 16v TwinCam - Belt Drive
Petrol Engine Setting/LockingKit - Fiat, Lancia 1.6 16v Belt Drive
inc VAT
exc VAT£157.95£189.54
OFFER PRICE
inc VAT
exc VAT£26.95£32.34
OFFER PRICE
inc VAT
exc VAT£79.95£95.94
OFFER PRICE
inc VAT
exc VAT£139.95£167.94
OFFER PRICE
inc VAT
exc VAT£64.95£77.94
OFFER PRICE
inc VAT
exc VAT£89.95£107.94
OFFER PRICE
inc VAT
exc VAT£99.95£119.94
OFFER PRICE
inc VAT
exc VAT£69.95£83.94
OFFER PRICE
• The MultiAir enginereplaces the inlet camshaft with an electro/hydraulic system operating the inlet valves.
• This kit is required to set the engine timing when carrying out belt replacement.
• Features a camshaft setting plate, crankshaftlocking tool and tensioner adjuster.
• Model No. VS5050• List Price £119.95
• This range of Fiat 1.3 16v diesel engines, used by a number of vehicle manufacturers, are alltwin camshaft, common rail diesels.
• The chain drive connects the crankshaftto the exhaust camshaft which in turn is connected by gears to the inlet camshaft.
• The overhaul kit is designed to minimise the level of disassembly so the cylinder head/camshafts can be removed without removing the front-end timing cover, sprockets and timing chain.
• Model No. VS5080• List Price £199.95
Diesel Engine Setting/Locking Kit - Fiat 1.7/1.9D/TD Belt Drive
• Suitable for timing belt replacement on 1.7/1.9 Fiat vehicles.
• Features camshaft locking plates and crankshaft timing tool.
• Model No. VSE2512• List Price £109.95
• Kit consists of camshaft setting plate, crankshaft locking tooland belt tensioner adjuster for the 1.2 engine.
• Additional sprocket locking tooland alignment fixture for the camshaft sensor on the 1.4 VVTengine.
• Model No. VSE5061• List Price £99.95
• Kit includes camshaft settingplates for locking the camshafts in the timed position.
• The plates are positioned in place of the camshaft bearing caps.
• The kit also includes timing and balance shaft belt tensioner adjusters.
• TDC positioning tools arealso required to time these engines, not supplied in kit.
• Model No. VSE2510• List Price £139.95
Petrol Engine Setting/LockingKit - Fiat, Lancia 1.6 16v Belt Drive
• Kit consists of Camshaft Setting Plates and a special timing belt tensioner adjuster.
• Model No. VS1402• List Price £222.95
TDC Position Tool Alfa Romeo, Fiat• Used in conjunction with Model
No. AK9634M dial gauge (notincluded) and enables accurate interpretation of piston position relative to TDC.
• Model No. VSE2515• List Price £39.95
NEW
NEWNEW
• Kit contains inlet and exhaust camshaft setting plates and atiming belt tensioner adjuster.
• TDC Position on these twin camengines is established using VSE2515 TDC Positioning Tool and AK9634M Dial Gauge.
Petrol Engine Setting/Locking Kit -Land Rover, MG, Rover 2.0, 2.5 KV6 - Belt Drive
Flywheel LockingTool
Injection & HP Pump Remover/Sprocket Retainer - BMW M47,M57, Land Rover (Td6),Vauxhall/Opel
inc VAT
exc VAT£39.95£47.94
OFFER PRICE
inc VAT
exc VAT£9.95£11.94
OFFER PRICE
inc VAT
exc VAT£84.95£101.94
OFFER PRICE
inc VAT
exc VAT£84.95£101.94
OFFER PRICE
inc VAT
exc VAT£44.95£53.94
OFFER PRICE
inc VAT
exc VAT£39.95£47.94
OFFER PRICE
inc VAT
exc VAT£25.95£31.14
OFFER PRICE
inc VAT
exc VAT£25.95£31.14
OFFER PRICE
inc VAT
exc VAT£319.95£383.94
OFFER PRICE
• Used to lock the flywheel so the bottom pulley boltcan be loosened or tightened, which is usuallynecessary when replacing the timing belt.
• Removal of the starter motor or gearboxmay be required for fitment of the tool.
• Adjustment on thetool allows it to fit most vehicles.
• Model No. VS778• List Price £59.95
FREEPetrol Engine CamshaftSetting Plates - MG 2.0,2.5 KV6 (190) - Belt Drive• Model No. VS4617• List Price £36.95
NEW
NEW
NEW
NEW
Injection & HP Pump Remover/Sprocket Retainer M47R LandRover, Rover/MG• For engine timing use
Setting/Locking Kit Model No. VSE5666.
• Model No: VSE5665• List Price £39.95
• Set comprises flywheel locking pin (threaded) and camshaft locking pin to cover engine timing on the Land Rover Td5 engines in Defender and Discovery models.
• Setting and locking kit for 2.7 diesel belt drive engines, fitted to both Land Rover and Jaguar vehicles.
• Kit contains camshaft alignment/timing pins and flywheel locking tools.
• Model No. VSE5000• List Price £67.45
Petrol Engine Twin VanosService Kit - BMW M52TU,M54, M56
• For use with twin vanos variable valve/timing units on six cylinder BMW engines.
• Designed for dismantling/assemblingand timing of the unit after engine overhaul/repair work.
• Used in conjunction with Model No. VS4425 Setting/Locking Tool Kit for engine timing.
• Model No.VSE5906• List Price £124.95
• Kit includes camshaft setting plate and TDC location pin which are required to ‘set’ and ‘lock’ the specified 1.7 and 2.5diesel engines in the timing position.
• The kit also contains timing chain tensioner retaining pins (pair), tensioner compression lever and injection pump remover/sprocket retainer which is used to retain and supportthe sprocket and timing chains in position when the pump has been removed.
Petrol Engine Setting/Locking KitFord, Mazda - Belt - Chain Drive
• Includes revised design camshaft setting plate and tensioner locking pin.
• This kit covers the complete range of Ford Duratec engines 1.25 through to 2.0 16vin both belt and chain drive variants.
• Pins also suitable for some Mazda vehicles.• Model No. VSE5515• List Price £22.45
inc VAT
exc VAT£15.95£19.14
OFFER PRICE
Belt Guide Roller AdjusterVauxhall/Opel V6
inc VAT
exc VAT£54.95£65.94
OFFER PRICE
inc VAT
exc VAT£129.95£155.94
OFFER PRICE
inc VAT
exc VAT£44.95£53.94
OFFER PRICE
inc VAT
exc VAT£115.95£139.14
OFFER PRICE
inc VAT
exc VAT£16.95£20.34
OFFER PRICE
inc VAT
exc VAT£34.95£41.94
OFFER PRICE
Diesel EngineSetting/LockingTool Set - FordTDCi, Mazda D1.4, 1.6, PSAHDi - Belt Drive
• Features timing pins to lock and hold the camshaft and crankshaft in the timed position.
• Flywheel locking tool can also be used for Ford Mondeo/Transit vehicles.
• Model No. VSE5846B• List Price £22.95
NEW
• Essential tools for timing beltreplacement on a wide rangeof Renault, Nissan & Vauxhall/Opel diesel engines.
• Model No. VSE5871• List Price £194.95
Diesel/Petrol Engine Setting/Locking Master Kit - Ford Belt - Chain Drive
Petrol Engine Setting/Locking KitRenault 1.4, 1.6, 1.8, 2.0 16v K4J, K4M, F4P, F4R(t) - Belt Drive
• Updated kit suitable for timing beltreplacement on 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault vehicles.
• These engines will require the use of associated tool, Model No. VSE5034 or VSE5734 Camshaft Sprocket HoldingTool, to loosen the camshaft sprocketbolts.
• Kit features updated camshaft settingplate which avoids the camshaft positionsensor on later 1.4 and 1.6 engines.
• Model No. VSE5071A• List Price £79.95
• Master kit of setting & locking tools suitable for a wide range of modern Ford vehicles.
• Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
• Model No. VS787• List Price £49.95
Diesel/Petrol Engine Crankshaft/Camshaft Locking Pin Set Renault 1.5, 1.8, 1.9, 2.0 - Belt Drive
• Set of camshaft and crankshaft locking pins for Renault diesel and petrol engines.
• Suitable for locking engine during cam belt replacement or during associated engine maintenance.
• Model No. VSE1901• List Price £24.95
• Suitable for adjusting the position of the upper andlower guide rollers on theVauxhall/Opel V6 EcoTec engine.
• Helps ensure that the timing belt is taut during installation and to assist initial belt tension.
• Model No. VS1301• List Price £62.45
Petrol Engine Camshaft SettingTool - VAG 1.4, 1.6 Belt Drive
• Suitable for VW 1.4 and 1.6twin camshaft/twin belt engines introduced in 1997.
• Model No. VS1246• List Price £72.95
20 Prices exclude VAT unless stated otherwise
16pc Setting/Locking Tool Kit
• Setting and locking kit for a range of VAG vehicles with Pumpe Duse TDi PD (1.9).
• Special tools required during removal/installation of the balance shaft on certain VAG 2.0 Pumpe Duse diesel engines.
• Set comprises balance shaft locking tool and chain tensioner locking pin.
• These engines are a belt drive withthe balance shaft driven separately by a chain.
• Model No. VSE5953• List Price £17.95
NEW
NEWNEW
• Suitable for belt replacement on Pumpe Duse diesel engines fitted to VAG vehicles and Ford Galaxy from 1999 on.
• Kit contains both crank locking tools for ‘Round’ and ‘Oval’ crankshaft gears, camshaft pins and tensioner tools for hydraulic and mechanical belt tensioners.
• Interchangeable auxiliary and timing pulley belt tensioner wrench set.
• A time saving and effective method for the professional technician.
• Sizes: 12-19mm.• Model No. VS789• List Price £119.95
• Suitable for the VAG 2.5 V6 dieselengines first introduced in 1997.
• Includes front end support guides, crankshaft locking pin, camshaft setting plates, injection pumplocking pin, tensioner socket and tensioner locking pin.
• Model No. VSE2351• List Price £64.95
Diesel Engine Balance ShaftLocking Set VAG 2.0 PumpeDuse - Belt Drive
Diesel Engine Camshaft Sprocket Hub Remover/Installer Set - VAG - Belt Drive
Professional Coil Spring Compressor Set1000kg Capacity
2pc Heavy-DutyCoil Spring Compressor Set
• Heavy-duty coil spring compressor with hardened steel body and force screw.
• Ensures smooth compression of spring.
• Maximum Capacityper Pair: 1000kg.
• Model No. AK3845• List Price £129.95
Coil Spring Compressing Stations - 1500kg Capacity
Steering Turntables Pair
2pc Coil Spring Compressor• Hardened carbon
steel lead screws and cast jaws.
• Use with 1/2"Sq drive wrench.
• 230mm Maximum jaw opening.
• Model No. AK3841• List Price £36.95
FREE4pc Mini Hook Set
• Model No. AK521• List Price £8.45
inc VAT
exc VAT£245.95£295.14
OFFER PRICE
inc VAT
exc VAT£22.95£27.54
OFFER PRICE
inc VAT
exc VAT£94.95£113.94
OFFER PRICE
inc VAT
exc VAT£189.95£227.94
OFFER PRICE
inc VAT
exc VAT£219.95£263.94
OFFER PRICE
inc VAT
exc VAT£22.95£27.54
OFFER PRICE
FREESteering Rack Knuckle Tool
• Model No. VS4000• List Price £24.95
FREEMagnetic Camber/
Castor Gauge• Model No. GA45• List Price £54.95
inc VAT
exc VAT£499.95£599.94
OFFER PRICE
• Measures up to 45º rotation in either direction.
• Maximum loading 1360kg per pair.
• Model No. GA44• List Price £329.95
FREE35pc 1/2”Sq Drive
WallDrive® Socket SetMetric
• Model No. S0914• List Price
£107.45
• Suitable for MacPherson strut coil springs.
• Features a yoke extension bracket that also allows use on conical springs.
• Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications and plastic yoke protectors that protect the spring coating from damage which can invalidate the vehicle manufacturer's warranty.
• Model No. RE229• List Price £499.95
• Quicker and easier than using ratchet driven spring compressor.• Plastic coated yokes reduce the risk of spring slippage/damage.• Suitable for springs from Ø102mm to Ø160mm.
• Low profile set suitable for most modern vehicles.
• Three sizes of jaw allow use on most cars and light commercial vehicles.
• Jaw Capacities: Small 23mm, Medium 28mm, Large 34mm.
• Features heavy-duty forged steel body and hardened screw with thrust ball.
• Model No. VS3800• List Price £99.95
FREECVJ Boot
Installation Tool
• Model No. VS705
• List Price £19.95
• For the assembly of new stainlesssteel bands on drive shafts where a torque setting is required.
• Model No. VS1640• List Price £79.95
Bundle Deal
FREE5pc Prybar/Heelbar Set• Model No. AK20641• List Price £29.95
Promotion Code: VST12.09
Disc Brake Piston SpreaderPistol Grip
• Designed to fit front brake callipers.
• Pistol grip design provides a fast, no nonsense approach to pushing the piston back.
• Model No. AK7113• List Price £39.95
11pc Brake Service Kit
Brake & Clutch Bleeding System
• One-man brake and clutch bleeding the professional way.
• Requires no external power source - simply fill and pump.
• Holds 2.5ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry.
• Pressure range makes unit suitable for use with ABS systems.
• Fitted with Ø42mm cap and suitable for most European models.
• Model No. VS820• List Price £99.95
Automatic Brake & Clutch Bleeder
Pneumatic Pressure Bleeder Kit
• One-man pressure brake and clutch bleeding system suitable for the professional workshop.
• Low pressure tank (20-40psi) can be pre-charged with compressed air - making the unit fully portable.
• Suitable for use on ABS systems.• Features a long delivery hose for operation with a low
level ramp and long reach handle for easy mobility.• Model No. VS0204• List Price £399.95
2pc CalliperSupport Hooks
• Used to hold the brake calliper away from the hub when replacing brake pads.
• Simply hang the calliper hook onto a suitable suspension component to hold the calliper out of the way and also stop the weight of the calliper damaging the brake hose.
• Model No. VS0354• List Price £6.45
FREEGravity Brake Bleeder Kit
• ModelNo. VS0209
• List Price £29.95
FREEGravity Brake Bleeder Kit
inc VAT
exc VAT£24.95£29.94
OFFER PRICE
inc VAT
exc VAT£274.95£329.94
OFFER PRICE
inc VAT
exc VAT£54.95£65.94
OFFER PRICE
inc VAT
exc VAT£69.95£83.94
OFFER PRICE
inc VAT
exc VAT£19.95£23.94
OFFER PRICE
inc VAT
exc VAT£59.95£71.94
OFFER PRICE
inc VAT
exc VAT£99.95£119.94
OFFER PRICE
inc VAT
exc VAT£3.95£4.74
OFFER PRICE
• Set contains the majority of tools required to carry out servicing/repair work on disc and drum brakes.
• This handy set is supplied in a carry-case to keep these commonly used tools together and is ideal for the busy workshop.
• Model No. VS0353• List Price £109.95
HGV Air Dryer Cartridge Remover
• Spring loaded air dryer filter wrench.• Essential tool for removing commercial air brake filters.• Model No. VS935• List Price £139.95
FREEBrake Piston Cube
3/8"Sq Drive
• Model No. VS039
• List Price £9.95
• Fast, easy and effective bleeding of brakes and clutch using air from tyre.
• Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoirbase to prevent accidental spillage.
• Supplied with rangeof common adaptors.
• Model No. VS0205• List Price £29.95
FREEDisc Brake Piston
Spreader - Pistol Grip
• Model No. AK7113• List Price £39.95
FREEMechanic’s Mat Set
EVA 22mm
• Model No. VS857• List Price £34.95
FREE18pc Brake PistonWind-Back Tool Kit
• Model No. VS0282• List Price £129.95
18pc Brake PistonWind-Back Tool Kit
26 Prices exclude VAT unless stated otherwise
NEW
• ModelNo. VS0209
• List Price £29.95
• Suitable for push-back and wind-back brake pistons.
• Includes left and right-handed thrust bolt assemblies.
• To prevent damage to the rims of the alloy wheel, it is essential to use a TC963 Tyre Bar.
• Model No. TC962• List Price £729.95
3pc 1/2"Sq Drive Alloy WheelDeep Impact Socket Set
Wheel Nut Cap Remover
Torque Sticks 1/2"Sq Drive
• Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches.• Prevents over-torque of wheel nuts.• Features a twist distortion marking for checking serviceability of tool.
inc VAT
exc VAT£499.95£599.94
OFFER PRICE
inc VAT
exc VAT£199.95£239.94
OFFER PRICE
inc VAT
exc VAT£44.95£53.94
OFFER PRICE
inc VAT
exc VAT£34.95£41.94
OFFER PRICE
inc VAT
exc VAT£34.95£41.94
OFFER PRICE
inc VAT
exc VAT£17.95£21.54
OFFER PRICE
14pc Wheel Maintenance Kit
• Removes surface dirt and corrosion.
• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.
• Suitable for use with power drill or air impact wrench.
• Supplied with 1/2"Sq drive adaptor.• Model No. SX036• List Price £52.95
7pc 1/2"Sq Drive Locking Wheel Nut Removal Set
Bead Seating ToolFREE4pc 1/2"Sq Drive
Alloy Wheel Impact Socket Set
• Model No. SX030• List Price
£49.95
• Removes the plastic wheel nut caps fitted to Audi, Seat, Skoda, Vauxhall/Opel and VW vehicles.
• Eliminates the need to lever off caps with a screwdriver, which may damage the alloy wheel.
• Up to six caps may be stored in the handle, ready for refitting.
• Model No. VS930• List Price £29.95
FREE2pc 1/2"Sq Drive
Locking Wheel Nut Removal Set
• Model No. SX200
• List Price £17.95
• Features nylon sleeve and insert to prevent damage to alloy wheels.
• Colour coded sockets for easy size selection.
• Comprises deep 17, 19 and 21mm 1/2"Sq drive sockets, plusspare nylon sleeves.
• Model No. SX031D• List Price £69.95
Model No. ColourTorque Rating
List Price Exc. VAT Inc. VAT
VS2243 Green 65lb.ft (90Nm) £19.95 £12.95 £15.54
VS2244 Black 75lb.ft (100Nm) £19.95 £12.95 £15.54
VS2245 Gold 80lb.ft (110Nm) £19.95 £12.95 £15.54
VS2246 Red 90lb.ft (120Nm) £19.95 £12.95 £15.54
VS2247 Blue 100lb.ft (135Nm) £19.95 £12.95 £15.54
Model No. V
S2243
Model No. V
S2244
Model No. V
S2245
Model No. V
S2246
Model No. V
S2247
28 Prices exclude VAT unless stated otherwise
• Dumps air into tyre void forcing bead to seat against rim for inflation.
• Fully certified tank with gauge and safety valve prevents over pressurising.
• Suitable for use on cars, commercials, agricultural and ATV tyres.
• Model No. TC900• List Price £299.95
• May also be used on fixings too damaged or corroded for standard sockets.
• Suitable for use with impact wrenches.• Contents: 17, 18.5, 20, 21.5, 23, 24.5, 26mm.• Model No. SX202• List Price £52.95
12V Heavy-Duty Compressor
TPMS Valve Tool
• Specialist tool designed to remove 11mm and 12mm TPMS sensor nuts and reseating the bevelled and non-bevelled sealing grommets.
• Model No. TSTPMS• List Price £5.45
Dial Type Tyre Pressure GaugeTUV/GS Approved
Jumbo Tyre Inflators
Clip-On Connector
Push-On Connector
• Composite body and dial type jumbo gauge with rubber protector.
• Calibrated in bar and psi.• Fitted with 400mm rubber hose.
Tyre Valve Installer
• Simplifies installation of tyre valves in tubeless wheels.• Pulls tyre valve assembly through rim.• Shank is notched to accommodate
various rim styles.• Strong 270mm long handle
with corrosion resistant plating.• Model No. TST/TVI• List Price £8.45
Single Barrel Foot Pump
Digital Tyre TreadDepth Gauge
FREETyre Pressure Gauge
• Model No. TSTPG1• List Price £3.75
inc VAT
exc VAT£49.95£59.94
OFFER PRICE
inc VAT
exc VAT£3.55£4.26
OFFER PRICE
inc VAT
exc VAT£5.95£7.14
OFFER PRICE
inc VAT
exc VAT£9.45£11.34
OFFER PRICE
inc VAT
exc VAT£4.95£5.94
OFFER PRICE
inc VAT
exc VAT£12.95£15.54
OFFER PRICE
inc VAT
exc VAT£11.95£14.34
OFFER PRICE
• Dial type pressure gauge with metal body and offset valve connector.
• Accurate to ±1.5psi.• Range: 0-3bar/0-40psi.• Model No. TST/PG97• List Price £8.95
• Suitable for inflating tyres on cars, vans and 4x4s.
• Powered by reliable, heavy-duty motor producing 45ft3 of air per hour.
• Integral gauge reads up to 20bar/300psi.
• Maximum Working Pressure: 200psi.
• Accessory kit containing, Presta type adaptor, ball spike and two inflatables adaptors included in storagecompartment on base.
• Model No. MAC2300• List Price £74.95
• 610mm Flexible hose with locking connector.
• 0-100psi.• Supplied with accessory
for inflating items such as small inflatable boats,air beds and balls etc.
• Hydraulic ram provides additional power to extract themost stubborn hubs.
• Model No. PS993• List Price £119.95
4pc Triple Leg Gear Puller Set• Drop-forged, high carbon
steel reversible legs and body.
• Heat treated and zinc plated to resist corrosion.
• Swivel thrust plates on larger sizes preventdamage to shaft ends.
• Sizes: 75, 100, 150, 200mm.• Model No. VS79• List Price £60.95
12pc Mechanical Bearing Separator Set
inc VAT
exc VAT£79.95£95.94
OFFER PRICE
inc VAT
exc VAT£99.95£119.94
OFFER PRICEinc VAT
exc VAT£84.95£101.94
OFFER PRICE
inc VAT
exc VAT£39.95£47.94
OFFER PRICE
inc VAT
exc VAT£69.95£83.94
OFFER PRICE
inc VAT
exc VAT£29.95£35.94
OFFER PRICE
inc VAT
exc VAT£8.45£10.14
OFFER PRICE
FREE6-24V Auto Probe with 4.5mtr Cable
• Model No. PP1
• List Price £39.95
FREE6pc Pick & HookSet Extra-Long
• Model No. AK5215• List Price £19.95
FREE5pc Scraper & Hook Set
• Model No. AK520
• List Price £19.95
FREE5pc Scraper & Hook Set
• Model No. AK520
• List Price £19.95
1.2mtr Telescopic Bonnet/Tailgate Support
• Three tier telescopic aluminium tailgate/bonnet support with tough rubber pads at each end.
• Lock in any position with a simple twist.• Also used for holding open doors,
depressing clutch, brake or accelerator pedals.
• Model No. VS0140• List Price £12.95
• Multi-purpose puller set for extracting flywheels and pulleys.
• Minimum/MaximumSpread: 40/93mm.
• Model No. PS979• List Price £45.95
• Mechanical puller set with Ø30-50mm and Ø50-75mm separators and single yoke with 180mm thrust bolt.
• Model No. PS984• List Price £109.95
FREE9pc Scraper & Hook Set
• Model No. AK5209
• List Price £31.95
FREETwin Leg Puller Bar Type 120 x 100mm
• Model No. AK46120
• List Price £18.95
Model No. Size/Spread x Reach List Price Exc. VAT Inc. VAT
AK46080 80 x 100mm £13.45 £7.95 £9.54AK46120 120 x 100mm £18.95 £10.95 £13.14AK46150 150 x 150mm £33.95 £18.95 £22.74AK46200 200 x 150mm £41.95 £23.95 £28.74AK46250 250 x 200mm £62.95 £35.95 £43.14
Mo
del
No
. AK
4625
0
30 Prices exclude VAT unless stated otherwise
• Forged steel 2-way yoke allows twin or triple leg pulls.
• 10tonne Hydraulic power unit with tommy bar.
• Supplied with 3 x 3 position puller arms and 3 sets of extension plates.
• Maximum reach: 250mm.
• Model No. PS981• List Price £164.95
49pc HarmonicBalancer Puller Set
Anemometer
• Wind speedmeasuring device featuring live/max/average/wind chill and Beaufort scale.
• Also reads temperature which can be measured in either °C or °F.
• Readings are displayed on a 24mm high back-lit LCD screen.
• Features a battery indicator and auto/manual power off.
• Requires CR2032 3V battery (supplied).
• Model No. TA070• List Price £34.95
Sound Level Meter 1ltr Chemical Sprayer
• Ideal for use with some brakecleaners, detergents, traffic film remover, penetrating oils and weed killer.
• Adjustable nozzle enables easy and direct application of liquid exactly where it is required.
• Robust composite construction with 1ltr capacity container.
• A compatibility document is available.
• Model No. TP01• List Price £22.95
On-Vehicle Brake Disc Lathe• Time and money saver that allows the brake disc to be refaced
whilst still on the vehicle and mounts directly to the mountingholes of the brake calliper.
• Eliminates disc run-out and compensates for small inaccuraciesin the hubs.
• Features a flexible mounting system with a selection of adaptorsfor various vehicles.
• Automatic setting with cut-out allows the operator to leave theunit unattended.
• See Video tab on our website for full demonstration videowww.sealey.co.uk.
• Model No. VS0299• List Price £6495.95
Workshop HeadlampBeam Setter• Suitable for pre-MOT inspection
in garages and bodyshops.• Utilises same optical box and
aiming screen as fitted to our MOT approved headlamp beam setter.
• Fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Fitted with fixed column and rubber wheels.
• Model No. HBS2001• List Price £724.95
inc VAT
exc VAT£49.95£59.94
OFFER PRICE
inc VAT
exc VAT£13.95£16.78
OFFER PRICE
inc VAT
exc VAT£22.95£27.54
OFFER PRICE
inc VAT
exc VAT£99.95£119.94
OFFER PRICE
inc VAT
exc VAT£3995.95£4795.14
OFFER PRICE
inc VAT
exc VAT£499.95£599.94
OFFER PRICE
FREEMini Digital
Thermometer• Model No. VS906• List Price £17.95
• High quality meter suitable formeasurement of environmental and mechanical noise.
• Conforms to IEC61672-1 class 2 for sound meters.
• Features min./max. measurements, over and under range, A and Cweighting, fast and slow response, data hold, record, digital read-out and bar graph with backlight.
• Powered by 9V battery (supplied).• Model No. TA060• List Price £139.95
• Small and compact with exceptionalclamping force.
• Ideal for automotive applicationswhen positioning body panels prior to welding.
• Micro clamp enables areas to be secured where other tools struggleto fit, such as door columns andwindow edges.
• Model No. AK6804• List Price £34.95
• Slim profile helps to locate and seat wiring loom in awkward places and to separate individual wires ready for inspection/installation, so minimizing damage.
• Model No. RT5KIT• List Price £24.95
ARRIVING OCTOBER
Promotion Code: VST12.09
33pc PaintlessDent Repair Kit
Air Suction Dent Puller
Door Hinge & Handle Removal Kit
7pc Airbag Removal Tool Set
• Designed for the safe removal of steering wheel airbags.
• Suitable for use on Audi, BMW, Mercedes, Seat, Skoda and VW vehicles.
• Model No. VS9000• List Price £57.95
6pc Pick & Hook Set Extra-Long
36 Function Radio Release Key Set• Thirty-six tools in one.• Updated set of tools
for safe, fast, authorised removal of fitted radios.
• Composite handle allows firm and comfortable grip.
• Model No. VS8048• List Price £34.95
inc VAT
exc VAT£99.95£119.94
OFFER PRICE
inc VAT
exc VAT£34.95£41.94
OFFER PRICE
inc VAT
exc VAT£11.95£14.34
OFFER PRICE
inc VAT
exc VAT£24.95£29.94
OFFER PRICE
inc VAT
exc VAT£12.95£15.54
OFFER PRICE
inc VAT
exc VAT£25.95£31.14
OFFER PRICE
inc VAT
exc VAT£299.95£359.94
OFFER PRICE
NEW
FREE3pc Windscreen
Handling Kit• Model No. WK1• List Price
£74.95
FREE6-24V Circuit Tester
• Model No. AK4008• List Price
£7.75
• Six long reach picks with black finished steel shafts.
• Suitable for pin/clip picking and the removal of O-rings and seals.
• Model No. AK5215• List Price £19.95
• TRX-Star* tools for the easy removal of door hinges and handles.
• For Audi, Mercedes, Porsche and VW models.
• Consists of two TRX-Star* long-reach drivers, 8mm hex drive reversible ratchet wrench and four TRX-Star* bits.
• Model No. VS805• List Price £40.95 FREE
• Model No. RTTS• List Price £4.95
Trim Stick
9pc Radio Release Tool Set
• Stainless steel radio removal tools.• For Audi, BMW, Ford, Mercedes
Benz and VW.• Supplied in labelled storage
pouch.• Model No. VS804• List Price £21.95
• Air activated suction pad keepsfirm hold of panel.
• Slide hammer used to ease out dents and depressions without damage to the paint surface.
• Ideal for initial panel reshaping.
• Supplied with large and small suction pads.
• Model No. RE101• List Price £169.95
FREEØ60mm
Air Suction Pad
• Model No. RE101.60
• List Price £14.95
34 Prices exclude VAT unless stated otherwise
ProfessionalDent Pullers
• Specialist device for pulling dents from panels and bodywork.
• Contoured aluminiumhandle and suction release trigger give the technician close control.
Model No. DiameterMax. Pull Capacity
List Price Exc. VAT Inc. VAT
AK100 Ø75mm 10kg £27.95 £17.95 £21.54
AK101 Ø100mm 15kg £28.95 £18.95 £22.74
AK102 Ø125mm 20kg £29.95 £19.95 £23.94
Model No. AK100
• Heavyweight, heat treated, high quality steel components are carefully shaped and finished to allow the technician (with practice) to coax outall manner of dents and creases from behind the body panel, removingthe need to respray/refinish the painted surface.
• The results achieved with this kit will depend on the skill of the operator.• Model No. RE102• List Price £399.95
inc VAT
exc VAT£49.95£59.94
OFFER PRICE
inc VAT
exc VAT£29.95£35.94
OFFER PRICE
inc VAT
exc VAT£24.95£29.94
OFFER PRICE
inc VAT
exc VAT£69.95£83.94
OFFER PRICE
inc VAT
exc VAT£84.95£101.94
OFFER PRICE
inc VAT
exc VAT£32.95£39.54
OFFER PRICE
inc VAT
exc VAT£149.95£179.94
OFFER PRICE
FREE20pc Spray Gun Cleaning Set
• Model No. BSGC2
• List Price £10.45
FREE5pc Mini Brush SprayGun Cleaning Set
• Model No. BSGC4
• List Price £5.45
FREE20pc Spray Gun Cleaning Set
• Model No. BSGC2
• List Price £10.45
HVLP Gravity Feed Spray Gun2.0mm Set-Up• Standard large set-up and economy price make
this spray gun ideal for applying base coats.• Round/flat fan control allows spray pattern to be
adjusted for any job.• Anodized spray gun body resists corrosion
and makes for easier cleaning.• Aluminium air cap with stainless steel
needle and nozzle make this HVLP gun suitable for water based paint.
• Supplied with 2.0mm set-up suitable for primer. 1.4 and 1.7mm set-ups available separately.
• Model No. HVLP742• List Price £72.95
Gravity Feed Spray Gun 2.0mm Set-Up
• Superbly balanced spray gun ideal for applying base coats.
• Features adjustable paint flow,fan width and air regulator controls.
• Supplied with composite gravity feed pot.
• Suitable for use with water based paints.
• Alternative set-ups available separately.
• Model No. SSG5• List Price £45.95
Wheel Skate Hydraulic 680kg Capacity
5pc Air Accessory Kit
• Contents: Suction Feed Spray Gun, Blowgun, Tyre Inflator, Paraffin Gun, Coiled Air Hose with couplings.
• Model No. SA33/S• List Price £49.95
10pc Heavy-Duty Slide Hammer Kit• Heavy-duty slide hammer with
4.4kg sliding weight.• For use on body panels
and vehicle chassis.• Supplied with various
attachments.• Model No. DP90• List Price
£119.95
• Professional gravity feed spray gun with 0.8mm set-up, ideal for small panels.
• HVLP Design gives a high transfer efficiency of paint saving on costs.
• Brass air cap with stainless steel needle and nozzle suitable for water based paints.
• Features air and paint flow controls for fine adjustment of spray pattern.
• Fully polished body resists corrosion and makes for easy cleaning.
• Alternative set-up available separately.• 1.0mm Set-up available.• Model No. HVLP736• List Price £69.95
Dust-Free Air Operated Random Orbital Sander
inc VAT
exc VAT£46.95£56.34
OFFER PRICE
General PurposeSuction Feed Spray Gun 1.5mm Set-Up
• Ideal for applying base coats.• Features adjustable paint flow
and fan width controls.• Supplied with aluminium screw
type suction feed pot. • Suitable for use with water
based paints.• Alternative set-ups available
separately.• Model No. SSG2• List Price £34.95 FREE
• Deluxe professional socket set with standard and deep,heat treated, mirror polished Chrome Vanadium steel sockets.
• Covers sizes from 4 to 14mm.• Features 48-tooth gear-to-gear comfort grip ratchet
handle, extension bars and accessories.• Supplied in tough, durable
storage case with a contents map displayed on the inside of the lid.
• Model No. AK8950• List Price £67.45
• Deluxe professional socket set with standard and deep,heat treated, mirror polished Chrome Vanadium steel sockets.
• Covers sizes from 6 to 24mm.• Features 48-tooth gear-to-gear comfort grip ratchet
handle, spark plug sockets, extension bars and accessories.
• Supplied in tough, durable carry-case with contents map displayed on the inside of the lid.
• Model No. AK8952• List Price £114.95
• Drop-forged Chrome Vanadium steel sockets, heattreated and chrome plated with a fully polished mirror finish for corrosion resistance.
• S2 Steel stubby hex bits with a zinc phosphate finish.• Ideal for limited access applications.• Contents: 4, 5, 6, 7, 8, 10,
12, 14, 17, 19mm.• Knurled ring for extra grip
with greasy fingers.• Model No. AK6229• List Price £33.95
• Heat treated Chrome Molybdenum and Chrome Vanadium steel construction with a smooth satin finish.
• Deeply serrated and hardened teeth grip the workpiece from any angle.
• Curved jaw design applies maximum pressure to all four corners of nut or bolt heads making it ideal for high torque applications.
• Features one hand no-pinch quick release grip toprovide comfort and control, reduce hand fatigue and are much easier to use than traditional stylelocking pliers.
• Contents: 140 & 220mm Curved Jaw, 210mm Long Nose.
• Designed for use with a standard ratchet or breaker bar.
• Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications.
• Large LCD display with LED/audible alarm indicating achieved and target torque levels.
• Selectable readings in Nm, lb.ft, lb.in or kg.m.
• Accurate to ±2% of stated capacity and operates in either direction.
• Features angle mode, eliminating the need for angle gauges and protractors providing the most accurate and fastest way to measure torque plus angle tighteningsequences.
• Will also accumulate angle measurement when multiple turns are required, ideal for use whereaccess is restricted.
• Model No. STW291• List Price £129.95
NEW
• Drop-forged Chrome Vanadium steel with contoured shafts.
• Fully hardened, tempered and chrome plated with polished mirror finish for resistance to corrosion.
• Flare type spanner jaw suitable for most common sizes of compression joint fittings.
• Five spanners covering ten sizes.• Model No. AK2651• List Price £39.95
NEW
• Hardened and tempered Chrome Vanadium steel shafts with a satin polished finish.
• Features hexagonal bolsters for use with a wrench.• Contoured, textured handles with hammer caps.• Shot blasted and blackened tips.• Contents: Slotted; 5 x 100,
6 x 150, 8 x 175mm, Phillips; #1 x 75, #2 x 100, #3 x 150mm.
• Model No. AK4932• List Price £34.95
• Comprises six sided TRX-P* and five sided security TRX-TS* bits manufactured from S2 Chrome Vanadium steel.
• TRX-P* fixings are now common place on new Europeanvehicles such as Renault, Vauxhall, Citroen and Peugeot.
• If a TRX-Star* bit is used on a TRX-P* fixing it can result in damage to the fastener and tool. Using the correct bit gives greater torque and minimises wear.
• TRX-TS* bits are suitable for a range of applications such as fuel injection pumps and air conditioning units.
• Contents: TRX-P* Bits; TP10-TP60, Security TRX-TS* Bits; TS10H-TS60H, Drive Adaptors; 1/4"Sq x 6mm Hex, 3/8"Sq x 10mm Hex, Magnetic Quick Chuck.
• Model No. AK6226• List Price £36.95
Promotion Code: VST12.09
inc VAT
exc VAT£299.95£359.94
OFFER PRICE
inc VAT
exc VAT£349.95£419.94
OFFER PRICE
inc VAT
exc VAT£899.95OFFER PRICE
inc VAT
exc VAT£999.95OFFER PRICE
NEWMotorcycle StorageShelters
Side Stand Type Motorcycle Dolly
Motorcycle Lift 365kg Capacity
• Min./Max. Height: 220/760mm.• Working Platform Size (W x L): 480 x 1350mm.• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 760mm, 640mm
and 500mm and to prevent accidental lowering.• Suitable only for motorcycles with a centre stand.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and
lock-downs to prevent lift from moving during use.• Model No. MC365• List Price £469.95
Motorcycle Lift 450kg Capacity
• Min./Max. Height: 175/810mm.• Platform (W x L): 145 x 2140mm.• All steel construction with foot operated, integral
hydraulic pump and ram assembly.• Fitted with platform safety lock device to prevent
accidental lowering.• Base assembly fitted with transport wheels allowing
lift to be moved in horizontal or vertical position.• Model No. MC450• List Price £499.95
38 Prices exclude VAT unless stated otherwise
Hydraulic Mini Tractor/Quad/Motorcycle Lift 680kg Capacity
• All steel construction with heavy-duty hydraulic ram.• Supplied with separate, foot operated, hydraulic pump
and reservoir unit.• Features two additional side platforms for extra width. • Ramp and platform made with chequer plate
surface to ease loading and positioning of mini tractor.• Safety lock to prevent accidental lowering. • Model No. MT680• List Price £1499.95
Hydraulic Mini Tractor/Quad/Motorcycle Lift 700kg Capacity
• Min./Max. Height: 180/900mm.• Platform Size (W x L): 950 x 2250mm.• All steel construction with heavy-duty hydraulic ram.• Full width ramp and platform with chequer plate
surface to ease loading and positioning of vehicle.• Fitted with over-run guard at front of platform
and mechanical safety lock.• Model No. MT700• List Price £1599.95
inc VAT
exc VAT£109.95£131.94
OFFER PRICE
Model No.Size
(L x W x H)List Price Exc. VAT Inc. VAT
MS065 2700 x 1050 x 1550mm £219.95 £149.95 £179.94MS066 3450 x 1370 x 1900mm £269.95 £179.95 £215.94MS067 3450 x 1880 x 1900mm £319.95 £199.95 £239.94
NEW
• Made with 600D polyester Oxford waterproof material.
• Easy to assemble and use.• When shut can be locked
with a padlock (not included).• Free standing or can be bolted
to a hard surface (bolts not included).• Supplied with soft ground anchors.• Will fit trikes, ATVs and ride on lawn mowers.
• Motorcycle dolly holds a single motorcycle or sport bike with a side stand, weighingup to 565kgs.
• Easy manoeuvring around the workshop or garage.• Front and rear lever operated wedge gates allow for easy loading and unloading.• Five position side stand platform to fit varied length side stands.• Front/rear steel pins to keep the motorcycle on the dolly
during moving, and smooth rolling dual castor wheels.• Overall Dimensions (L x W x H): 2120 x 770 x 90mm.• Loading Track Dimensions (L x W x H): 2000 x 200 x 50mm.• Model No. MS063• List Price £179.95
£1199.94£1079.94
Model No. MS065
FREEMotorcycle Rear Lift
for MC450• Model No. MC450RL• List Price £34.95
Motorcycle Chain Alignment Tool
Motorcycle Piston RingCompressing Tool
6-8mm Carburettor JetWrench Set
• Double end wrench suitable for use with 6 & 8mm round jets.
• Single end wrenchfor use on 6mm hex jets.
• Model No. MS007• List Price £17.95
Motorcycle ForkSeal Drivers
• Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals.
• Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance.
• Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily.
• Limits potential damage to the forks caused by using other methods.
To see Sealey’s impressive full range of products browse online at www.sealey.co.uk
or request a copy.
Get your FREECatalogue
email
Web
*TR
X-S
TAR
, TR
X-T
S a
nd T
RX
-P tools
are
suita
ble
for
drivi
ng T
OR
X®
and T
OR
X P
LU
S®
fast
eners
resp
ect
ively
. TO
RX
®and T
OR
X P
LU
S®
are
regis
tere
d t
rad
em
ark
s o
f Acu
me
nt In
telle
ctu
al P
rop
ert
ies,
LL
C.
• Used to check and adjust the alignment ofthe lasers on Model No. MS070 MotorcycleWheel Laser Aligner.
• This unit will allow workshops to check and adjust in-house.
• Supplied with comprehensive instructions.• Model No. MS070CR• List Price £99.95
40 Prices exclude VAT unless stated otherwise
MotorcycleTools & Equipment
Motorcycle Wheel AlignmentTool
• Fast, simple and accurate alignment of rear wheel.
• Optimises vehicle performance and set up after installation or modification of the chain, sprockets, brakes or suspension components.
• This fully portable kit is also ideal for track-day set up or for the motorcycle enthusiast.
• Model No. MS070• List Price £349.95
inc VAT
exc VAT£249.95OFFER PRICE
inc VAT
exc VAT£79.95£95.94
OFFER PRICE
Promotion valid from 1st September to 31st December 2012. Offers will be withdrawnwhen stock is sold. We reserve the right to change products and pricing at any time.Specifications and descriptions on this promotion are given in good faith butmay change without notice and do not form any part of a sale contract E & OE.
MotorcycleTools & Equipment
Visit your online store and download theFREE Sealey App today to view our latest catalogue and promotions on
your iPad or iPhone.
Your Local Dealer
Kempson Way, Suffolk Business Park,Bury St Edmunds, Suffolk IP32 7AR
£299.94
NEW
NEWCalibration Rig for MS070
• RE-CALIBRATION SERVICE: We offer a competitively priced calibration service and recommend the unit is returned to us if the unit becomes damaged or re-calibration is required.
• Contact our technical help line for further information on 01284 757505 and quote Model No. MS070CAL.