86 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1. Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1. 6 Pt SKU 1103577 99 99 37320 Pitman Arm and Ball Joint Front End Service Kit SKU 900820 119 99 27181 • Services Pitman Arm, Tie Rod and Ball Joints • Includes: Pitman Arm/Tie Rod End Puller, Ball Joint Separator, Pitman Arm Puller, Ball Joint/Tie Rod End Remover • Comes in a Sturdy Blow Mold Case 23 Piece Hub Bearing Remover and Installer Kit SKU 094804 259 99 27205 • Removes and Installs Wheel Bearings with Steering Knuckle and Strut Assembly Still on the Vehicle, Eliminates Need for Alignment Hub Bearing Pitman Arm Puller CV Axle Nut Sockets GM Upper Control Arm Knock Out Tool SKU 420336 27 99 24210 • Services Chevrolet and GMC 1/2, 3/4 and 1 Ton, 2 and 4 Wheel Drive Trucks (1989 to 2001) and All Wheel Drive Chevrolet Astro and GMC Safari Vans (1990 to 2002) Tomcat Air-Assisted Multiple Camber Adjustment Tool SKU 360484 229 99 DOWTC614 Suspension OTC Hub Grappler ™ Wheel Bearing Puller SKU 096847 579 99 OTC6575 • Complete Solution for Servicing Wheel Hubs and Bearings on the Vehicle without Removing the Steering Components or Knuckle - Eliminates Unnecessary Alignments or the Use of a Shop Press • Applies Maximum Force with Minimal Effort from an Impact Gun Torsion Bar Tool GM, Ford, Chrysler Torsion Bar Tool SKU 1103600 69 99 37278 • Safely Loads and Unloads 5-lug, 6-lug and 8-lug GM, Dodge and Ford Torsion Bar Suspensions for Key Replacement • Extended Long Reach "C-Clamp" for use with 2011 and Higher GM Heavy Duty Trucks • Includes Ford/Dodge Adapter Color May Vary Brake Drum and Rotor Puller SKU 1125878 129 99 25106 • Use with Impact Wrench to Remove Hubs, Drums and Brake Rotors • Includes (3) Hub Adapters for Use with Most Common Hub Sizes and Types • Jaw Spread Up to 12-3/4" with 5" Reach • Durable Forged Frame Rated to 7 Tons of Pulling Force for the Toughest Jobs • Drum and Rotor Pulling Arms Feature with Raised Stops for Use with Ratchet Straps (Not Included) • Easily Adjust the Arms and Set Puller in Place for Tough Pulling Jobs in Tight Spaces SEE AZTOOL1.COM FOR FULL LINE OF CV AXLE NUT SOCKETS 12 Pt SKU 1103460 99 99 37321 10 Piece Master Spring Compressor Strut/Coil Spring Compressor Kit SKU 094802 109 99 27203 • Used to Compress Most Sizes of MacPherson Springs and Coil Springs • Heat-treated for Toughness • Comes in a Blow Mold Case Coil Spring Compressor SKU 1103643 39 99 37035 • Used to Safely Compress the Coil Spring on Most Cars and Light Trucks • Can Also Be Used When Installing Coil Spring Spacers Model 7600 Strut Spring Compressor SKU 547959 1,059 99 BRA7600 • Handles the Toughest Applications • Min./Max. Spring Diameters: 3.5"/11.5" • No Adapters Required Cart for BRA7600 SKU 547960 439 99 BRA00-0137 Bench Mount for BRA7600 SKU 547962 64 99 BRA05-0125 OEM Approved by Major Automakers Spring Compressors Air Operated Strut Spring Compressor SKU 544805 769 99 24860 • Quickly, Easily, and Safely Compress and Remove Strut Springs for Replacement and Repair of Automotive Strut Components • Includes Two Interchangeable Plastic-Coated Lower Yokes and a Suspension Strut Clamp • Adjustable to Fit a Wide Range of Spring Configurations and Diameters • Foot Controlled Valve • Maximum Air Pressure: 116 psi • Spring Diameters: 4-6.5" • Maximum Load: 2,200 Lb. StrutTamer ™ II Extreme with Stand SKU OUTSIDE BUY/EPO 1,289 99 OTC6637-ST • Meets the New ASME PASE Standards for Spring Compressors • Capable of Safely Compressing the Largest Strut Springs • New Forged Locking Jaws Include Larger Pads and Offset to Clamp onto and Compress Springs Even Tighter Than Before • Unique Trunnion Locking Mechanism to Eliminate Arm Movement for Stable Compression Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions Color May Vary Tie Rod Tools Inner Tie Rod Tool SKU 094645 19 99 25296 • Use to Easily Turn Tie Rods • Use with an Extension, Tighten Nuts on U-Bolt as Needed • Tool Can Remove Inner Tie Rod without Removing Outer Tie Rod Inner Tie Rod Tool Kit SKU 217377 54 99 27185 • Removes and Installs Tie Rod End on Rack and Pinion Steering • Includes: 1-3/16", 1-5/16" and 1-7/16" Master Inner Tie Rod Tool Set SKU 344979 144 99 27178 Works on Both Small Cars and SUVs • Tube Handle Has an Inner Diameter of 2.125" to Service Small Cars, Pickups and Large SUVs • Includes 12 Crowfoot Style Adapters, Sizes: 29 mm, 1-3/16", 1-1/4", 32.5 mm, 1-5/16", 33.6 mm, 1-3/8", 1-7/16", 1-1/2", 38.4 mm, 40 mm and 42 mm • Comes in a Blow Mold Case Master Inner Tie Rod Tool SKU 080557 139 99 LIS46800 • Works on Inner Tie Rods with Inaccessible Wrench Flats • Includes 9 Crowfoot Style Adapters to Work on Various Applications • Long Socket Slips Over the Tie Rod End and the Crowfoot Engages on the Socket for Easy Removal and Installation Inner Tie Rod Tool SKU 291414 94 99 LIS45750 • 6 Sizes: 1-3/16", 1-1/4", 1-5/16", 1-7/16", 1-1/2" and 33.6 mm Volvo Shock Retaining Nut Strut Removal Socket Tool SKU 300125 29 99 24365 • Includes Holding Socket with “Double D” Axle Center Socket • Fits Several Volvo Models (1999 to 2010) Universal Shock Absorber Tool SKU 036202 27 99 25038 • For Removing and Installing Shock Nuts • Fits Many Shock Stems Shock Tools MacPherson Strut Tool SKU 1149178 74 99 LIS62300 • Fits all Strut Spring Sizes, Import and Domestic • Heavy Duty Clamps and Bolts Securely Hold Spring During Operation • Safe, Strong and Universal Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions 2,200 Lb. Capacity Floor Mounted Strut Compressor SKU OUTSIDE BUY/EPO 374 99 CAL91300 • For Strut Assemblies on Passenger Cars, Light-trucks, Vans, and SUV’s. • For Coils 3.5" to 8.75" Wide and Up to 19" High • Can be Used with Varying Coil Diameters Up to 5/8"″ • Can Be Mounted to the Floor • Adaptive Spring Bracket Can be Configured in Multiple Configurations • Safe and Easy, One-person Use Axle Nut Socket Sets • Includes Sizes: 29, 30, 32, 34, 35, 36, 38 and 39 mm NEW NEW NEW CHASSIS & SUSPENSION
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
86 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.
6 PtSKU 1103577 999937320
Pitman Arm and Ball Joint Front End Service KitSKU 900820 119 9927181• Services Pitman Arm, Tie Rod and Ball Joints• Includes: Pitman
Arm/Tie Rod End Puller, Ball Joint Separator, Pitman Arm Puller, Ball Joint/Tie Rod End Remover
• Comes in a Sturdy Blow Mold Case
23 Piece Hub Bearing Remover and Installer KitSKU 094804 259 99 27205• Removes and Installs
Wheel Bearings with Steering Knuckle and Strut Assembly Still on the Vehicle, Eliminates Need for Alignment
Hub Bearing
Pitman Arm Puller
CV Axle Nut Sockets
GM Upper Control Arm Knock Out Tool SKU 420336 27 9924210• Services Chevrolet and
GMC 1/2, 3/4 and 1 Ton, 2 and 4 Wheel Drive Trucks (1989 to 2001) and All Wheel Drive Chevrolet Astro and GMC Safari Vans (1990 to 2002)
OTC Hub Grappler™ Wheel Bearing PullerSKU 096847 57999OTC6575• Complete Solution for Servicing Wheel Hubs and
Bearings on the Vehicle without Removing the Steering Components or Knuckle - Eliminates Unnecessary Alignments or the Use of a Shop Press
• Applies Maximum Force with Minimal Effort from an Impact Gun
Torsion Bar Tool
GM, Ford, Chrysler Torsion Bar ToolSKU 1103600 69 9937278 • Safely Loads and Unloads 5-lug, 6-lug and 8-lug GM,
Dodge and Ford Torsion Bar Suspensions for Key Replacement• Extended Long
Reach "C-Clamp" for use with 2011 and Higher GM Heavy Duty Trucks
• Includes Ford/Dodge Adapter
Color May Vary
Brake Drum and Rotor PullerSKU 1125878 129 99 25106• Use with Impact Wrench to Remove Hubs,
Drums and Brake Rotors• Includes (3) Hub Adapters for Use with
Most Common Hub Sizes and Types• Jaw Spread Up to 12-3/4" with 5" Reach• Durable Forged Frame Rated to 7 Tons of Pulling
Force for the Toughest Jobs• Drum and Rotor Pulling Arms Feature with Raised
Stops for Use with Ratchet Straps (Not Included)• Easily Adjust the Arms and Set Puller in Place for Tough Pulling Jobs in Tight Spaces
SEE AZTOOL1.COM FOR FULL LINE OF CV AXLE NUT SOCKETS
12 PtSKU 1103460 999937321
10 Piece Master Spring Compressor Strut/Coil Spring Compressor KitSKU 094802 109 9927203 • Used to Compress Most
Sizes of MacPherson Springs and Coil Springs
• Heat-treated for Toughness
• Comes in a Blow Mold Case
Coil Spring CompressorSKU 1103643 39 9937035• Used to Safely Compress
the Coil Spring on Most Cars and Light Trucks
• Can Also Be Used When Installing Coil Spring Spacers
Model 7600 Strut Spring CompressorSKU 547959 1,059 99BRA7600• Handles the Toughest Applications• Min./Max. Spring Diameters: 3.5"/11.5"• No Adapters Required
Cart for BRA7600SKU 547960 439 99 BRA00-0137
Bench Mount for BRA7600SKU 547962 64 99BRA05-0125
OEM Approved by Major
Automakers
Spring Compressors
Air Operated Strut Spring CompressorSKU 544805 769 9924860• Quickly, Easily, and Safely
Compress and Remove Strut Springs for Replacement and Repair of Automotive Strut Components
• Includes Two Interchangeable Plastic-Coated Lower Yokes and a Suspension Strut Clamp
• Adjustable to Fit a Wide Range of Spring Configurations and Diameters
• Foot Controlled Valve• Maximum Air Pressure: 116 psi• Spring Diameters: 4-6.5"• Maximum Load: 2,200 Lb.
StrutTamer™ II Extreme with StandSKU OUTSIDE BUY/EPO 1,289 99OTC6637-ST• Meets the New ASME PASE Standards
for Spring Compressors• Capable of Safely Compressing the
Largest Strut Springs• New Forged Locking Jaws Include
Larger Pads and Offset to Clamp onto and Compress Springs Even Tighter Than Before
• Unique Trunnion Locking Mechanism to Eliminate Arm Movement for Stable Compression
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Color May Vary
STORE STOCKED
Tie Rod Tools
Inner Tie Rod ToolSKU 094645 19 9925296• Use to Easily Turn Tie Rods• Use with an Extension,
Tighten Nuts on U-Bolt as Needed
• Tool Can Remove Inner Tie Rod without Removing Outer Tie Rod
Inner Tie Rod Tool KitSKU 217377 54 9927185 • Removes and Installs Tie Rod End
on Rack and Pinion Steering• Includes: 1-3/16", 1-5/16" and 1-7/16"
Master Inner Tie Rod Tool SetSKU 344979 1449927178 Works on Both Small Cars and SUVs • Tube Handle Has an Inner Diameter of 2.125" to
Service Small Cars, Pickups and Large SUVs• Includes 12 Crowfoot Style
Adapters, Sizes: 29 mm, 1-3/16", 1-1/4", 32.5 mm, 1-5/16", 33.6 mm, 1-3/8", 1-7/16", 1-1/2", 38.4 mm, 40 mm and 42 mm
• Comes in a Blow Mold Case
Master Inner Tie Rod ToolSKU 080557 139 99LIS46800• Works on Inner Tie Rods with Inaccessible
Wrench Flats• Includes 9 Crowfoot Style Adapters to Work
on Various Applications • Long Socket Slips Over the Tie Rod End and the
Crowfoot Engages on the Socket for Easy Removal and Installation
Inner Tie Rod Tool SKU 291414 9499LIS45750
• 6 Sizes: 1-3/16", 1-1/4", 1-5/16", 1-7/16", 1-1/2" and 33.6 mm
Universal Shock Absorber Tool SKU 036202 27 9925038• For Removing and
Installing Shock Nuts• Fits Many
Shock Stems
Shock Tools
MacPherson Strut ToolSKU 1149178 74 99LIS62300• Fits all Strut Spring Sizes,
Import and Domestic• Heavy Duty Clamps and Bolts
Securely Hold Spring During Operation
• Safe, Strong and Universal
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
2,200 Lb. Capacity Floor Mounted Strut CompressorSKU OUTSIDE BUY/EPO 37499CAL91300• For Strut Assemblies on Passenger Cars,
Light-trucks, Vans, and SUV’s.• For Coils 3.5" to 8.75" Wide and Up to 19" High• Can be Used with Varying Coil Diameters Up to 5/8"″• Can Be Mounted to the Floor• Adaptive Spring Bracket Can be Configured
in Multiple Configurations• Safe and Easy, One-person Use
Axle Nut Socket Sets • Includes Sizes: 29, 30, 32,
34, 35, 36, 38 and 39 mm
NEW
NEW
NEW
CHASSIS & SUSPENSION
87Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.