-
250W multifunction tooloriginal instructions & Warranty
AFTER SALES SUPPORTUK HELPLINE NO 0905-1460005 (£ 0,06
/min.)
IRELAND HELPLINE NO 1520-932626 (E 0,15 /min.)
WEB SUPPORT www.servotool.eu
Model nuMber: PoT-250 ArT.no: oTM6008
After Sales SupportNow you have purchased a Power Craftproduct
you can rest assured in theknowledge that as well as your 3
yearparts and labour warranty you havethe added peace of mind of
dedicatedhelplines and web support.
OTM6008 Ma-GB-IRE 1006-15.indd 1 6/15/10 4:04:38 PM
-
contents
3 Introduction
4. Machine information
8. Safety instructions
11. Assembly and operation
13. Maintenance
14. Exploded view
15. Spare parts list
16. Warranty
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 2
OTM6008 Ma-GB-IRE 1006-15.indd 2 6/15/10 4:04:38 PM
-
introduction
congratulations on choosing to buy a Power craft product.
By doing so you now have the assurance and peace of mind that
comes with purchasing a product made by one of Europe’s leading
manufacturers.
All products brought to you by Power Craft are manufactured to
the highest standards of performances and safety, and, as part of
our philosophy for customer service and satisfaction, are backed by
our comprehensive 3 Year Warranty.
We hope you will enjoy using your purchase for many years to
come.
multifunction tool
The numbers in the text refer to the diagrams on pages 4.
Always read the instructions for electrical products carefully
before use. It will help you understand your product better and
avoid unnecessary risks. Keep this instructions manual in a safe
place for future use.
Intended useThis machine is intended for dry sanding of small
areas, sawing and scraping with various tool accessories, as well
as for polishing, rasping, cutting and separating various
materials.
Contents1. Machine data2. Safety instructions3. Assembly and
operation4. Maintenance
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 3
OTM6008 Ma-GB-IRE 1006-15.indd 3 6/15/10 4:04:38 PM
-
machine information
Fig. 1
FeaturesFig. 11. On/Off switch2. Speed control3. Auxiliary
handle4. Sanding sole5. Sandpaper6. Scraper7. E-cut saw blade8.
Segmented HSS saw blade9. Dust adapter
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 4
1
5
6
7
4
2
3
9
8
Fig. 2
OTM6008 Ma-GB-IRE 1006-15.indd 4 6/15/10 4:04:41 PM
-
machine information
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 5
Technical specifications
Mains voltage 230-240 V~Frequency 50 HzPower input 250 WNo-load
speed 15,000 - 22,000 /minWeight 1.48 kgLpA (sound pressure level)
85+3 dB(A)LwA (sound power level) 96+3 dB(A)Vibration 6.77 + 1.5
m/s2
Vibration levelThe vibration emission level stated in this
instruction manual has been measured in accordance with a
standardised test given in EN 60745; it may be used to compare one
tool with another and as a preliminary assessment of exposure to
vibration when using the tool for the applications mentioned- using
the tool for different applications, or with different or
poorly
maintainted accessories, may significantly increase the exposure
level- the times when the tool is switched off or when it is
running but not
actually doing the job, may signifi cantly reduce the exposure
level
Protect yourself against the effects of vibration by maintaining
the tool and its accessories, keeping your hands warm, and
organizing your work patterns.
Package contents
Check the machine, loose parts and accessories for transport
damage.
1 Multifunction tool1 Dust adapter1 Scraper1 Segmented HSS saw
blade1 E-shaped saw blade1 Sanding sole5 Pcs sanding paper G605 Pcs
sanding paper G805 Pcs sanding paper G120
5 Pcs sanding paper G1801 Auxiliary handle2 Pcs allen key1
Instruction manual1 Quick start guide1 After Sales card
OTM6008 Ma-GB-IRE 1006-15.indd 5 6/15/10 4:04:42 PM
-
Safety instructions
The following pictograms are used in these instructions for
use:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Indicates electrical shock hazard.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health and
the health of bystanders.Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust extraction
during use.
Wear safety goggles. Wear hearing protection.
Warning!Read all instructions. Failure to follow all instruc
tions listed below may result in electric shock, fire and/or
serious injury. The term “power tool” in all of the warnings listed
below refers to your mains operated (corded) power tool or battery
operated (cordless) power tool. Save these instructions.
1) Work areaa. Keep work area clean and well lit. Cluttered and
dark areas invite
accidents.b. Do not operate power tools in explosive atmos
pheres, such as in the
presence of flam mable liquids, gasses or dust. Power tools cre
ate sparks which may ignite the dust of fumes.
c. Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2) Electrical safetya. Power tool plugs must match the outlet.
Never modify the plug in any
way. Do not use any adapter plugs which earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of elec tric shock if your body is earthed or grounded.
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 6
OTM6008 Ma-GB-IRE 1006-15.indd 6 6/15/10 4:04:43 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 7
machine information
c. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
redu ces the risk of electric shock. Always use tool in con
junction with a residual circuit breaker device.
3) Personal safetya. Stay alert, watch what you are doing and
use common sense when
operating a power tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol or medi ca tion. A
moment of inattention while opera ting power tools may result in
serious personal injury.
b. Use safety equipment. Always wear eye protection. Safety
equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce
personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off
position before plugging in. Carrying power tools with your finger
on the switch or plugging in power tools that have the switch on
invites accidents.
d. Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all
times. This enables better con trol of the power tool in unexpected
situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewel lery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and properly
used. Use of these devices can reduce dust related hazards.
OTM6008 Ma-GB-IRE 1006-15.indd 7 6/15/10 4:04:43 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 8
Safety instructions
h. Use clamps or a vice to hold work. It’s safer than using your
hand and it frees both hands to operate tool.
4) Power tool use and carea. Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power
tool accidentally.
d. Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
e. Maintain power tools. Check for misalign ment or binding of
moving parts, breakage of parts and any other condition that may
affect the po wer tools operation. If dama ged, have the po wer
tool repaired before use. Many acci dents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner intended for
the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from intended could result in hazardous
situation.
h. Damaged switches must be replaced at a cus to mer service
repair centre. Do not use power tools that cannot be switched on
and off.
i. Do not leave power tools unattended while they are switched
on. Always switch off the tool and wait until it has come to a full
standstill before leaving.
j. If the mains cable has been damaged, it must be replaced with
a special mains cable. These can be obtained from the manufacturer
or the manufacturer’s custo mer service department. The mains cable
may only be replaced by the manufacturer, the manufacturer’s
customer service department or equally qualified persons.
OTM6008 Ma-GB-IRE 1006-15.indd 8 6/15/10 4:04:43 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 9
Safety instructions
5) Battery tool use and carea. Ensure the switch is in the off
position before inserting battery pack.
Inserting the battery pack into power tools that have the switch
on invites accidents.
b. Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
c. Use power tools only with specifically desig nated battery
packs. Use of any other battery packs may create a risk of injury
and fire.
d. When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws, or
other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may
cause burns of a fire.
e. Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritations or burns.
6) Servicea. Please use a qualified expert who uses original
replacement parts to repair
your power tool. This will ensure proper functioning of the
power tool.b. Caution! The use of any accessories or additional
tools other than those
recommended in this manual may lead to an increased risk of
injury. Only use original replacement parts.
Special safety instructions•
Comparethemaximumnumberofrevolutionsallowedoftheaccessories
with the number of revolutions of the machine.•
Whenyouputthemachineawaytheenginemustbeswitchedoffand
moving parts must have reached a standstill.•
Neverattachanassemblyspannertoyourmachinewithapieceofstring
or anything similar.•
Donotusesandpaperintendedforlargersandingpads.Largersandpaper
will extend beyond the sanding pad causing snagging, tearing of
the paper or kick-back. Extra paper extending beyond the sanding
pad can also cause serious lacerations.
• Useaclampingdeviceforsecuringtheworkpiece.•
Keepyourhandsawayfromtheworkpiece.
OTM6008 Ma-GB-IRE 1006-15.indd 9 6/15/10 4:04:43 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 10
Safety instructions
Electrical safetyWhen using electric machines always observe the
safety regulations applicable in your country to reduce the risk of
fire, electric shock and personal injury. Read the following safety
instructions and also the enclosed safety instructions. Keep these
instructions in a safe place!
Always check that the power supply corresponds to the voltage on
the rating plate.
The machine is double insulated; therefore no earth wire is
required.
Replacing cables or plugsIf the mains cable becomes damaged, it
must be replaced with a special mains cable available from the
manufacturer or the manufacturer’s customer service. Dispose of old
cables or plugs immediately after replacing them with new ones. It
is dangerous to connect the plug of a loose cable to a socket.
OTM6008 Ma-GB-IRE 1006-15.indd 10 6/15/10 4:04:43 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 11
Assembly and operation
Mounting the side-handleFig. 1The side handle can be used for
both left-hand and right-hand control.
•
Fastenthesidehandleforleft-handoperationontheright-handsideofthe
machine.
•
Fastenthesidehandleforright-handoperationontheleft-handsideofthe
machine.
Make sure that the side handle is fastened properly and cannot
loosen unexpectedly.
Setting the speedFig.1The speed can be set (from slow to fast)
using the continuous speed adjustment wheel (2).
Switching on:• Pushtheswitch(1)forwardtoposition
Switching off:• Pushtheswitch(1)backtoposition
Hints for optimum use•
Clamptheworkpiece.Useaclampingdeviceforsmallworkpieces.•
Drawalinetodefinethedirectioninwhichtoguidetheaccessory.•
Firmlyholdthemachinebythegrip.• Switchonthemachine.•
Waituntilthemachinehasreachedfullspeed.•
Placetheaccessoryontheworkpiece.•
Slowlymovethemachinealongthepre-drawnline,firmlypressingthe
accessory against the workpiece.•
Donotapplytoomuchpressureonthemachine.Letthemachinedothe
work.• Applylesspressurewhenthemachinestartstovibrateheavily.•
Switchoffthemachineandwaitforthemachinetocometoacomplete
standstill before putting the machine down.
OTM6008 Ma-GB-IRE 1006-15.indd 11 6/15/10 4:04:43 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 12
Assembly and operation
AccessoriesFig. 1
4 + 5. Sanding sole:Sanding near edges, corners and hard to
reach areas. (Depending on the sanding paper for sanding of wood,
paint, varnish and stone.)6. Scraper:Scraping on solid underground.
For instance removal of glue, carpets and tiles. (carpet,
flooring)7. E-cut sawblade:Separating and deep plunge cuts, for
sawing close to edges, in corners and hard to reach areas. (wooden
materials, soft materials)8. Segmented HSS saw blade:Separating and
deep plunge cuts, for sawing close to edges, in corners and hard to
reach areas. (Hard and soft wood, plastic, non-ferrous metals.)
Mounting accessoriesFor saw blades, scrapers and disc cutters
and cutting discs use the clamping screw in combination with the
retaining ring.• RemovetheclampingscrewusinganAllenkey.•
Replacethetoolandtightenitusingtheclampingscrew.Checkthatthe
tool is secure in the chuck and that the machine is correctly
secured and supported.
Fitting/replacing sandpaperUsing hook and loop fastening
system.•
Placethesandpaperinthemiddleofthesandingdiscandpressitfirmly
with your hand.•
Pressthesandpaperfirmlyontotheplatewithbrief,firmpressureand
then switch on the machine. This ensures that the disc is
correctly secured and prevents excessive wear.
•
Ifthesandpaperisworninaparticularspot,youcanremoveit,turnit120° and
refit it or replace it.
Mounting the dust adapter.Fig. 2Mount the dustadapter using the
3 hexagonal screws as shown on figure 2. Warning! Switch the
machine off and unplug the machine before mounting the
accessories.
OTM6008 Ma-GB-IRE 1006-15.indd 12 6/15/10 4:04:44 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 13
maintenance
The machines have been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper machine care and regular
cleaning.
CleaningKeep the ventilation slots of the machine clean to
prevent overheating of the engine.Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
LubricationThe machine requires no additional lubrication.
FaultsShould a fault occur, e.g. after wear of a part, please
contact the service address on the warranty card. In the back of
this manual you find an exploded view showing the parts that can be
ordered.
EnvironmentTo prevent damage during transport, the appliance is
delivered in a solid packaging which consists largely of reusable
material. Therefore please make use of options for recycling the
packaging.
Please recycle this product at end of life. Contact your
retailer or local authority recycling centre for assistance.
WarrantyThe warranty conditions can be found on the separately
enclosed warranty card.
OTM6008 Ma-GB-IRE 1006-15.indd 13 6/15/10 4:04:44 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 14
Exploded view
OTM6008 Ma-GB-IRE 1006-15.indd 14 6/15/10 4:04:44 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 15
Spare parts list
Positon Description No. 1 + 2 Ring + screw 702809 7 Bearing
806000 16 Bearing 800608 18 Rotor 702810 19 Bearing 800607 23
Stator 702811 24 + 25 Switch cover + switch bar 702812 28 Carbon
brush holder 702814 29 Carbon brush set 702814 35 Switch 702815
OTM6008 Ma-GB-IRE 1006-15.indd 15 6/15/10 4:04:44 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 16
Warranty
WARRANTY CERTIFICATEYear of manufacture: 06/2010 250W Oscilating
tool POT-250Congratulations! You have made an excellent choice with
the purchase of this Quality product. Our commitment to quality
also includes our service. Should you, contrary to expectations,
experience defects due to material or manufacturing faults during
private use within 36 months of the date of purchase we shall be
liable for warranty in accordance with statutory warranty
regulations, provided that: - The device was not put to any use
other than the intended.- Was not overloaded. - Was not used with
the wrong accessories. - Repairs where not carried out by any other
than the authorised workshop. The warranty certificate is only
valid in connection with the receipt. Please keep both in a safe
place. The warranty does not affect your statutory rights.The
product is guaranteed for a period of three years beginning on the
day of purchase. Keep your purchase receipt safe as proof of the
date of purchase. The guarantee period can only be extended for the
duration of any repair required.During the warranty period if the
item becomes defective, in the first instance, please call the
helpline. We will, at our discretion either repair or exchange the
device in accordance with warranty legislation.
Please include the following when sending in your product for
repair:1. The receipt (proof of purchase)2. This warranty
certificate with your name, address, contact details and a fault
description completed overleaf.If the original receipt is not
enclosed the repair will be charged for in all cases. After the
warranty has expired you can still send defective devices for
repairs to the address at the end of this booklet. Quotes as well
as repairs after warranty period are to be paid for in all cases.
Ensure the product is sent well packed as no responsibility can be
accepted for items lost or damaged in transit. This warranty does
not affect your statutory rights.
EC DECLARATION OF CONFORMITYWe Ferm B.V.Lingenstraat 6, 8028 PM
Zwolle, The Netherlandsdeclare that the design and construction of
the following machine, in the form supplied by us, comply with the
requirements of the appropriate EC directives.Product Description:
Multifunction toolModel: POT-250Appropriate EC directives:
2006/42/EC, 2004/108/EC, 2002/95/EC, 2002/96/EC,
2006/95/ECApplicable harmonised norms: EN 60745-1, EN 60745-2-4, EN
55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
J.A. Bakker - van Ingen CEO Ferm B.V. 06/2010
OTM6008 Ma-GB-IRE 1006-15.indd 16 6/15/10 4:04:45 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 17
OTM6008 Ma-GB-IRE 1006-15.indd 17 6/15/10 4:04:45 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 18
OTM6008 Ma-GB-IRE 1006-15.indd 18 6/15/10 4:04:45 PM
-
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 Web
Support: www.servotool.euModel Number: POT-250 19
OTM6008 Ma-GB-IRE 1006-15.indd 19 6/15/10 4:04:45 PM
-
In order to deal with your enquiry as quickly and efficiently as
possible, we ask you to send your enquiry by email
([email protected]). Do not forget to include your name,
address and a
daytime telephone number.
Alternatively, you can contact our service hot-line on the
number given below.Office hours are as follows:
Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm
UK Helpline
Circuit Tech Ltd.Units 1/9 Stanley Mill • Kirkebrok Road •
Deane, Bolton Lancs, England • BL3 4JE
Service Center0905-1460005 - £ 0,06 /min.*
Ireland Helpline
Circuit Tech Ltd.Units 1/9 Stanley Mill • Kirkebrok Road •
Deane, Bolton Lancs, England • BL3 4JE
Service Center1520-932626 - E 0,15 /min.*
WEB SUPPORTwww.servotool.eu
Replacements or repairs under guarantee regulations are free of
charge.
* Applies to calls from BT/Eircom landlines. Charges by other
network providers and calls from mobiles may vary. Prices correct
at time of print.
250W multifunction toolPOT-250
Name:
Address:
Contact Telephone No.:
Fault Description:
Please complete this section before sending in your warranty
certificate.
If you are requested by the manufacturer to return the item for
repair please complete the enclosed section and send it
together
with your product and your receipt (proof of purchase) to
theservice address shown below.
1006-15
OTM6008 Ma-GB-IRE 1006-15.indd 20 6/15/10 4:04:46 PM