DS S45FFN FLFL_BRINE Subject to change without notice. (rev. 01/15) AMERICAN AVK RESILIENT SEATED DUCTILE IRON GATE VALVE 45/FFN_BRINE 250 PSI, Tested to AWWA C509 / C515 (NRS) FLxFL Flanged Ends to ANSI B16.1 Class 125 - Valve sizes 2.5" - 16" Use: For neutral brines to a maximum temperature of 70 o F. Contact American AVK for specific applications. Tests: Hydraulic test to AWWA C509: Shell Test: 500 PSI Seat Test: 250 PSI Operating Torque Test Required Materials for Brines: - Holiday free internal coating. - PUR coating for buried applications - 316 Stainless steel hardware - Low Zinc Bronze Stem Optional Materials: Actuator Plate for gearing Standard Materials: Body, Bonnet, Ductile iron ASTM A536 Gland Flange, Stem Low Zinc Bronze Wedge Ductile iron ASTM A536 encapsulated with EPDM-rubber compound Wrench Nut,Wedge Nut, Bronze Thrust Collar Bonnet Bolts Stainless Steel - 316 sealed with hot melt Gland Bolts Stainless Steel - 316 Hexagon bolt Bonnet Gasket, ASTM D2000 Buna "N" nitrile Wiper Ring, rubber O-Ring Stem Seals, O-Ring Gland Seal American AVK Company - 2155 Meridian Blvd., Minden, NV 89423 - USA - Tel.: 775.552.1400 - Email: [email protected] - www.americanavk.com American AVK Company an ISO 9001 and ISO 14001 registered company COPYRIGHT©AVK GROUP A/S 2015