2/4/8-Port USB DVI/HDMI/DisplayPort Single/Dual ... - ATEN

2/4/8-Port USB DVI/HDMI/DisplayPort

Single/Dual Display Secure KVM Switch

User Manual

www.aten.com

ATEN Secure KVM User Manual

ii

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment

has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. Any changes or modifications made to this equipment may void the user’s

authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency

energy. If not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

� Reorient or relocate the receiving antenna.

� Increase the separation between the equipment and receiver.

� Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

� Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

KCC Statement

유선 제품용 / B 급 기기 ( 가정용 방송 통신 기기 ) 이 기기는 가정용 (B

급 ) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며 ,

모든 지역에서 사용할 수 있습니다

RoHS

This product is RoHS compliant.


iii

SJ/T 11364-2006

The following contains information that relates to China.


iv

User Information

Online Registration

Be sure to register your product at our online support center:

https://eservice.aten.com/eServiceCx/Common/productRegister.do

Telephone Support

For telephone support, call this number:

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8-4481-58923

User Notice

All information, documentation, and specifications contained in this manual are subject to change

without prior notification by the manufacturer. The manufacturer makes no representations or

warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims

any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's

software described in this manual is sold or licensed as is. Should the programs prove defective

following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the

entire cost of all necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by

unauthorized modifications to this device. It is the responsibility of the user to correct such

interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the

correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE

VOLTAGE SETTING IS CORRECT BEFORE USE.


V

Package Contents

The ATEN Secure KVM package consists of:

1 Secure KVM Switch

1 Power Cord

1 User Instructions*

Check to make sure that all of the components are present and in good order.

If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to

prevent any damage to the switch or to any other devices on the Secure KVM installation.

*Please visit our website to download the most up to date version of the manual.

© Copyright 2011–2017 ATEN® International Co., Ltd.

Manual Version: v1.05

Manual Date: 2020-03-06

ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights

reserved.

All other brand names and trademarks are the registered property of their respective owners.


vi

Contents EMEMEMEMC C C C InformationInformationInformationInformation ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................ iiiiiiii SJ/T 11364SJ/T 11364SJ/T 11364SJ/T 11364----2006200620062006 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................ iiiiiiiiiiii User InformationUser InformationUser InformationUser Information ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................ iviviviv Online RegistrationOnline RegistrationOnline RegistrationOnline Registration ............................................................................................................................................................................................................................................................................................................................................................................................................................................................ iviviviv Telephone SupportTelephone SupportTelephone SupportTelephone Support ............................................................................................................................................................................................................................................................................................................................................................................................................................................................ iviviviv User NoticeUser NoticeUser NoticeUser Notice ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ iviviviv Package ContentsPackage ContentsPackage ContentsPackage Contents ................................................................................................................................................................................................................................................................................................................................................................................................................................................................ VVVV About This ManualAbout This ManualAbout This ManualAbout This Manual ........................................................................................................................................................................................................................................................................................................................................................................................................................................................ viiiviiiviiiviii OverviewOverviewOverviewOverview ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ ixixixix ConventionsConventionsConventionsConventions ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ xxxx Product InformationProduct InformationProduct InformationProduct Information ............................................................................................................................................................................................................................................................................................................................................................................................................................................................ xxxx Chapter 1Chapter 1Chapter 1Chapter 1 IntroductionIntroductionIntroductionIntroduction ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ 1111 Overview ........................................................................................................................... 1 Features ............................................................................................................................ 2 Requirements .................................................................................................................... 4 Console ............................................................................................................................. 4 Computers ........................................................................................................................ 4 Cables ............................................................................................................................... 4 Operating Systems ........................................................................................................... 5 Components ...................................................................................................................... 6 Front View ......................................................................................................................... 6 Rear View.......................................................................................................................... 7 Chapter 2Chapter 2Chapter 2Chapter 2 Hardware SetupHardware SetupHardware SetupHardware Setup ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................ 11111111 Before You Begin ............................................................................................................ 11 Stacking .......................................................................................................................... 13 Rack-Mount ..................................................................................................................... 13 Cable Connection ........................................................................................................... 13 Installation Diagram ........................................................................................................ 16 Chapter 3Chapter 3Chapter 3Chapter 3 OperationOperationOperationOperation ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ 17171717 Powering On ................................................................................................................... 17 Manual Switching ............................................................................................................ 18 Port ID Numbering .......................................................................................................... 18 LED Display .................................................................................................................... 18 Chassis Intrusion Detection ............................................................................................ 20


vii

Smart Card and CAC Reader ......................................................................................... 20 AppendixAppendixAppendixAppendix Safety Instructions .......................................................................................................... 21 General ........................................................................................................................... 21 Consignes de Sécurité .................................................................................................... 23 Général ........................................................................................................................... 23 Technical Support ........................................................................................................... 25 International .................................................................................................................... 25 North America ................................................................................................................. 25 Specifications .................................................................................................................. 26 Limited Warranty ............................................................................................................. 34


viii

About This Manual

This user manual is intended for system administrators and end users.

This user manual is provided to help you get the most from your ATEN Secure KVM Switch system. It

covers all aspects of installation, configuration and operation. An overview of the information found in

the manual is provided below.

This user manual covers the following ATEN Secure KVM Switches: ConfigurationConfigurationConfigurationConfiguration 2222----PortPortPortPort 4444----PortPortPortPort 8888----PortPortPortPort PC Video PC Video PC Video PC Video ConnectionConnectionConnectionConnection Console Video Console Video Console Video Console Video ConnectionConnectionConnectionConnection No. of DisplaysNo. of DisplaysNo. of DisplaysNo. of Displays DisplayPortDisplayPortDisplayPortDisplayPort HDMIHDMIHDMIHDMI SingleSingleSingleSingle CS1182DP CS1184DP CS1188DP DualDualDualDual CS1142DP CS1144DP CS1148DP HDMIHDMIHDMIHDMI HDMIHDMIHDMIHDMI SingleSingleSingleSingle CS1182H CS1184H CS1188H DualDualDualDual CS1142H CS1144H CS1148H DVIDVIDVIDVI DVIDVIDVIDVI SingleSingleSingleSingle CS1182D CS1184D CS1188D DualDualDualDual CS1142D CS1144D CS1148D

ATTENTION

If the tamper-evident seal is missing or peeled, avoid using the product and contact

your ATEN dealer.

If all front panel LEDs flash continuously (except the Power LED), or the switch’s

enclosure appears breached, avoid using this product and contact your ATEN dealer.

This Secure KVM Switch is equipped with active always-on chassis intrusion

detection security. Any attempt to open the enclosure will permanently damage,

disable the switch, and void the warranty.

Tamper-evident seal


ix

Overview

Chapter 1, Introduction, introduces you to the ATEN Secure KVM Switch system. Its purpose,

features and benefits are presented, and its front and back panel components are described.

Chapter 2, Hardware Preparative Procedure, provides step-by-step instructions for setting up

your installation.

Chapter 3, Operation, explains the concepts involved in operating the ATEN Secure KVM Switch.

An Appendix, provides specifications and other technical information regarding the ATEN Secure

KVM Switch.


x

Conventions

This manual uses the following conventions:

Product Information

For information about all ATEN products and how they can help you connect without limits, visit

ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of

locations and telephone numbers:

International http://www.aten.com

North America http://www.aten-usa.com


XI

This Page Intentionally Left Blank


1

Chapter 1

Introduction

Overview

The ATEN Secure KVM Switch series is NIAP-certified and compliant with NIAP PP 3.0 (Protection

Profile for Peripheral Sharing Switch version 3.0) requirements, satisfying the latest security requisites

set by the U.S. Department of Defense for peripheral sharing switches. Compliance ensures maximum

information security while sharing a single set of HIDs (keyboards, mouse, speakers, and CAC Reader)

between multiple computers. Conformity with Protection Profile v3.0 certifies that other USB

peripherals cannot be connected to the console ports of the Secure KVM Switch, and that only a

keyboard and mouse are accommodated, therefore providing high-level security, protection and

safekeeping of data.

The ATEN Secure KVM Switch hardware security includes tamper-evident tape, chassis intrusion

detection, and tamper-proof hardware, while software security includes restricted USB connectivity –

non-HIDs (Human Interface Devices) are ignored when switching – an isolated channel per port that

makes it impossible for data to be transferred between secure and unsecure computers, and automatic

clearing of the keyboard and mouse buffer when switching port focus.

By combining physical security with controlled USB connectivity and controlled unidirectional data

flow from devices to connected computers only, the ATEN Secure KVM Switch series gives you the

means to consolidate multiple workstations of various security classification levels with one keyboard,

monitor and mouse (KVM) console.

Note:

1. The National Information Assurance Partnership (NIAP) is a United States government initiative to

meet the security testing needs of IT consumers and manufacturers. It is operated by the National

Security Agency (NSA) and the National Institute of Standards and Technology (NIST).

2. The ATEN Secure KVM Switch series additionally satisfies Protection Profile version 3.0 for

Peripheral Sharing Switch (PSS).


2

Features

FEATURES BENEFITS

■ 2/4/8-Port USB DVI/HDMI/DisplayPort

Single/Dual Display Secure KVM Switch

Reduces the costs involved in controlling up to 8

Single/Dual Display computers while offering data

isolation between shared peripherals and computers

■ Superior ultra high video resolution- up

to 4K UHD (3840 × 2160 @30Hz)*

Supports resolutions up to 3840 x 2160@30Hz* with

crystal clear image quality

■ Video DynaSync™ – exclusive ATEN

technology

ATEN Video DynaSyncTM

eliminates boot-up display

problems and optimizes resolutions when switching

between ports

■ DisplayPort AUX channel filtering

(DisplayPort Secure KVM only)

Non-qualified auxiliary channel traffic such as MCCS

and EDID write are rejected

■ NIAP PP PSS v3.0 certified Provides the most advanced security features

required by the latest Protection Profile (PP) v3.0 for

Peripheral Sharing Switches (PSS)

■ Pushbutton port selection and secure

port switching

Port selection via pushbutton only to enhance

security. Keyboard, Mouse, Video, Audio and CAC

reader switch together for secure switching.

■ Channel Isolation Isolated channel per port — makes it impossible for

data to be transferred between computers

■ Shared peripherals and computer

isolation

Console USB and PS/2 keyboard/mouse are

supported. The always-on keyboard, mouse, and

display EDID emulation ensures isolation between

peripherals and connected computers.

■ Keyboard, Mouse, and Video EDID

emulation

Keyboard, mouse, and EDID emulation ensures

isolation between peripherals and connected

computers.

■ Restricted USB connectivity Non-authorized HIDs (Human Interface Devices) or

non-predefined CAC devices will be rejected /

ignored.

■ Unidirectional data flow Secure design enables unidirectional data flow

between devices and connected computers.

■ Administrative configuration and event

log functions

Secure access for authorized administrator to audit

KVM operation logs and secure configuration.

(Please refer to the Administrator’s guide.)

■ Supports analogue audio (speaker

only)**

Only unidirectional speaker data is allowed

preventing the passage of the analogue audio by

microphone input or line input.

■ Active always-on chassis intrusion

detection

If the cover is removed from the switch, the unit

becomes inoperable and all front panel LEDs (except

the Power LED) flash continuously.


3

■ Clears keyboard buffer when switching Keyboard data buffer is automatically purged when

switching KVM port focus.

■ Tamper-proof hardware All integrated circuits are soldered directly to the

circuit board to prevent tampering with the

components.

■ Tamper-evident tape Provides a visual indication of any attempt to gain

access to the switch’s internal components.

■ Firmware non-reprogrammable Prevents tampering and attempts to reprogram the

switch’s firmware.

■ Metal enclosure Rugged metal enclosure.

Note:

* HDMI and DisplayPort Secure KVM Switch series supports console video output resolutions up to 4K @ 30 Hz.

DVI Secure KVM Switches offer 3840 x 2160 @ 30 Hz video output on compatible HDMI-interfaced

monitors/computers with ATEN DVI-to-HDMI KVM cables.

**Only analogue speaker data input is supported. The ATEN Secure KVM Switch does not convert digital audio to

analogue audio.


4

Requirements

Console � DVI (for DVI-interfaced Secure KVM) or HDMI (for HDMI and DisplayPort-interfaced Secure

KVM) monitor capable of the highest resolution that you will be using on any computer in the

installation � USB mouse � USB keyboard � PS/2 mouse (Optional) � PS/2 keyboard (Optional) � Speaker (Optional) � USB Smart card or CAC (Common Access Card) reader (Optional)

Computers � A DVI/HDMI/DisplayPort video output connector � A USB Type A port for keyboard and mouse � A USB Type A port for Smart Card or CAC reader (Optional) � A 3.5 mm jack Audio port for speaker (Optional)

Cables

The KVM cable sets which are specifically designed to work with this switch are not supplied in the

package and require a separate purchase.

For security, do not apply any cable that has a microphone audio input or line in audio input.


5

Operating Systems

Suggested operating systems are shown in the table, below:

Note: Supports Linux Kernel 2.6 and higher.


6

Components

Front View

CS1188D

CS1142H

CS1184DP


7

Rear View

CS1188D

CS1142H

CS1184DCS1184DCS1184DCS1184DPPPP

Note:

1. This user manual uses CS1188D, CS1142H, and CS1184DP to demonstrate each interface

(DVI/HDMI/DisplayPort), port number (2/4/8- Port), and number of displays (single/ dual)

included in ATEN Secure KVM

2. The console video of the CS1182DP/CS1184DP/CS1188DP/CS1142DP/CS1144DP/CS1148DP

(DisplayPort models) only supports an HDMI video output.

3. All the models support USB and PS/2 console keyboard/mouse and USB CAC card reader port.


8

No.No.No.No. ComponentComponentComponentComponent DescriptionDescriptionDescriptionDescription 1111 Port Selection Pushbuttons Pressing a Port Selection Pushbutton brings together the keyboard, mouse, video, audio, and CAC reader focus to the computer attached to its corresponding port.

2222 Port and CAC LEDs

The Port / CAC LEDs are located on front panel to indicate Port/CAC reader selection or connection status. Port LEDsPort LEDsPort LEDsPort LEDs (Lower row; Orange LEDs)(Lower row; Orange LEDs)(Lower row; Orange LEDs)(Lower row; Orange LEDs) � Online – Lights dim orange to indicate that the computer attached to its corresponding port is connected and powered on. � Selected – Lights bright orange to indicate that the computer attached to its corresponding port has the KVM focus. CAC LEDsCAC LEDsCAC LEDsCAC LEDs (Upper(Upper(Upper(Upper row, Green LEDs)row, Green LEDs)row, Green LEDs)row, Green LEDs) � Online – Lights dim green to indicate that the computer attached to its corresponding port has a USB CAC reader cable connection and the CAC function is enabled. � Selected – Lights bright green to indicate that the CAC function is enabled and the computer attached to its corresponding port has the CAC focus. �None – No lights indicate the cable is not connected or CAC has been disabled. � Warning - Flashes to indicate that a non-qualified USB smart card / CAC reader is connected when the corresponding port has the focus. Note:Note:Note:Note: 1. CAC function of each port can be enabled or disabled by pressing the port selection pushbutton for more than 3 seconds (this is a toggle feature). Please refer to the Operation section of this user manual for more information. 2. All front panel LEDs (except the Power LED) will flash continuously when a chassis intrusion or self-test failures (except for Pushbutton jam) are detected. See Chassis Intrusion Detection section for further details. 3. Port and CAC LEDs also indicate the status of the Secure KVM self-test status. See Operation section for further details 3333 Reset Button

Press this button to reset the ATEN Secure KVM Switch. Note: Note: Note: Note: When you perform a reset by pressing the reset button for more than 5 seconds, the keyboard/mouse buffer will be purged and the switch will reboot and perform a self-test. After a successful self-test, port focus will be switched to port 1, and the CAC function of each port will be set to factory default setting (enabled). If the Secure KVM fails to generate video on the monitor after a reset, please power off the installation, check the cables, and follow the


9

instructions found in this manual to power on the installation. 4444 Audio Ports The cables from your speakers plug in here. Note: Note: Note: Note: Only standard analogue speaker connections are allowed. The use of an analog microphone or line-in audio device is strictly prohibited. 5555 USB Smart Card / CAC Reader Port Only qualified USB authentication devices (e.g., standard smart card and CAC reader) can be plugged into this port. Note: Note: Note: Note: USB authentication device filter is configurable by authorized administrators for trusted devices (eg. USB token, USB Biometric reader). Please refer to the Administrator’s Guide for details. 6666 Num Lock LED Lights green to indicate the Num Lock function has been turned on. Note:Note:Note:Note: The Num Lock LED on the keyboard will be disabled due to security requirements. 7777 Caps Lock LED Lights green to indicate the Caps Lock function has been turned on. Note:Note:Note:Note: The Caps Lock LED on the keyboard will be disabled due to security requirements. 8888 Scroll Lock LED Lights green to indicate the Scroll Lock function has been turned on. Note:Note:Note:Note: The Scroll Lock LED on the keyboard will be disabled due to security requirements. 9999 Power LED Lights blue to indicate that the ATEN Secure KVM Switch is powered on.

10101010 USB Console Ports

The USB keyboard and mouse plug into these ports. The USB console keyboard port (lower port) and mouse port (upper port) are only compatible with a standard USB keyboard/mouse. Note:Note:Note:Note: 1. The console USB keyboard and mouse ports are interchangeable, meaning you can connect a keyboard to the mouse port and vice versa. However, for optimal operation it is recommended that you connect the USB keyboard to console's USB keyboard port and the USB mouse to console's USB mouse port. 2. For security purposes, the ATEN Secure KVM Switch does not support wireless keyboards. Do not attempt to connect a wireless keyboard to the switch in any case. 3. Non-standard keyboards/mice with integrated USB hubs and/or other USB-integrated devices may not be fully supported due to the strict security standards and policy for the ATEN Secure KVM Switch. If supported, only basic (HID) keyboard/mouse operations will function. 4. Multimedia keys on the keyboard will not function due to the security policy. 5. The Num Lock, Caps Lock, and Scroll Lock LED on keyboards will not function due to the security policy.


10

11111111 PS/2 Console Ports The PS/2 keyboard and mouse plug into these ports. (PS/2 mouse port: Green; PS/2 keyboard port: Purple) 12121212 Video LED(s) This LED lights green when the video connection is up and running. The LED flashes when a non-qualified monitor is connected. Note:Note:Note:Note: With the dual-display model, each console video connection has a video LED. 11113333 Console Monitor Port(s) The cable from your console monitor plugs in here. NoteNoteNoteNote: The dual-display model has two console monitor ports. 11114444 KVM Port Section The custom KVM cables that attach to your computers plug in this section. 11115555 KVM Audio Port The audio cable that attaches to your computer plugs in here. NoteNoteNoteNote: Only speaker connections are allowed. The use of an analog microphone or line-in audio device is strictly prohibited. 11116666 KVM USB Port The USB cable that attaches to your computer's keyboard / mouse plugs in here. 11117777 USB Smart Card / CAC (Common Access Card) Reader Port The USB cable that attaches to your computer's USB Smart Card / CAC reader plugs in here. 11118888 Power Switch This is a standard rocker switch that powers the ATEN Secure KVM Switch on and off. 11119999 Power Socket The AC power cord plugs in here.


11

Chapter 2

Hardware Setup

Before You Begin

Tampering prevention and detection

1. The ATEN Secure KVM Switch includes tamper-evident tape to provide visual indications of

intrusion to the switches enclosure. If the tamper-evident seal is missing, peeled, or looks as if it’s

been adjusted, avoid using the product and contact your ATEN dealer.

2. The ATEN Secure KVM Switch is equipped with active always-on chassis intrusion detection. If a

mechanical intrusion is detected, the switch will be permanently disabled and all the front panel

LEDs (except the Power LED) will flash continuously. If the switches’ enclosure appears breeched

or all the LEDs are flashing continuously, stop using it, remove it from service immediately and

contact your ATEN dealer.

3. Any attempt to open the switches enclosure will activate the chassis intrusion detection security,

which will render it inoperable and void the warranty.

4. The ATEN Secure KVM Switch cannot be upgraded, serviced or repaired.

5. The ATEN Secure KVM Switch is equipped with active always-on chassis intrusion detection

security. Never attempt to open the enclosure. Any attempt to open the enclosure will permanently

damage and disable the switch.

6. The ATEN Secure KVM Switch contains an internal battery which is non-replaceable. Never

attempt to replace battery or open the switches’ enclosure.

Use always qualified and authorized peripheral devices

1. For security, the ATEN Secure KVM Switch supports only standard USB or PS/2 keyboard/mouse

(or pointing device). Do not connect a wireless keyboard/mouse, or any keyboard/mouse with an

internal USB hub or composite device function to the switch.

2. When connecting a non-qualified keyboard, the keyboard will not function. No keyboard

keystrokes will be seen on the screen.

3. When connecting a non-qualified mouse, the mouse will not function. No mouse cursor movement

will be seen on the screen.

If any tamper-evident seal is missing or peeled, avoid using the

product and contact your ATEN dealer.

If all front panel LEDs except the Power LED flash continuously

or the switches’ enclosure appears breached, avoid using this

product and contact your ATEN dealer.

Tamper-evident seal


12

4. Num Lock LED, Caps Lock LED, and Scroll Lock LED on keyboard will be disabled due to the

security policy.

5. Special multimedia keys on the keyboard will be disabled due to the security policy.

6. For security, the ATEN Secure KVM Switch does not support an analogue microphone or line-in

audio input. Never connect a microphone to the switches’ audio output port, including a headset’s.

Standard analogue speakers and headsets are supported.

7. For security, the USB CAC port on the ATEN Secure KVM Switch by default only supports

authorized user authentication devices such as USB Smartcard or CAC readers. Do not connect

other USB devices to the USB CAC port. Non-qualified or non-authorized USB devices will be

rejected. For administrative configuration, please refer to the Administrator’s Guide and Port

Authentication Utility Guide for details.

8. For security, do not use any USB CAC authentication device or other peripherals that adopt an

external power source.

9. Always use a qualified monitor. Non-qualified monitors will be rejected.

10. Do not use wireless video transmitters or any docking device.

11. Do not connect any Thunderbolt device to the Secure KVM.

Secure Installation

1. Do not attempt to connect or install the following devices to the computers connected to the ATEN

Secure KVM Switch: TEMPEST computers; telecommunication equipment; frame grabber video

cards; or special audio processing cards.

2. Important safety information regarding the placement of this device is provided on page21. Please

review it before proceeding.

3. Before installation, make sure the power sources to all devices connected to the installation are

turned off. You must unplug the power cords of any computers that have the Keyboard Power On

function.

4. Hot-swapping of the console monitor is not allowed. Power off the Secure KVM Switch and the

monitor before changing the console monitor.

5. A computer connected to the Secure KVM Switch should only be powered on after all of the

connections to the device are made (video, USB and audio).

Secure Operation and Administration

Please refer to Administrator’s Guide for Secure KVM configuration and event log auditing

functions.


13

Stacking

The ATEN Secure KVM Switch features a rugged, metal enclosure which provides stability and allows

the unit to be stacked on a desktop. The unit can be placed on any level surface that can safely support

its weight and the weight of the attached cables. Ensure that the surface is clean and free of materials

that can block the exhaust vents or otherwise interfere with normal operation of the KVM switch.

Rack-Mount

The ATEN Secure KVM Switch features a rack-mount design and offers rack-mount options.

Rack-mount kits which are specifically designed to work with this switch are not supplied in the

package and require a separate purchase.

Cable Connection

To set up your ATEN Secure KVM Switch installation, refer to the installation diagram on the

following page (the numbers in the diagrams correspond to the steps below), and do the following:

1. Plug your USB keyboard and USB mouse into the USB console ports located on the unit’s rear

panel. (The USB keyboard and mouse console ports are only compatible with standard USB

keyboard/mice. If you are using PS/2 keyboard/mouse, plug your PS/2 keyboard and PS/2 mouse

into the corresponding PS/2 ports.)

2. Plug your console monitor(s) into the console video port(s) located on the unit’s rear panel and

power on the monitor.

Plug your speakers into the console's speaker jack located on the unit’s front panel.

Note:

1. The console USB keyboard and mouse ports are interchangeable, meaning you can connect a

keyboard to the mouse port and vice versa. However, for optimal operation, it is recommended that

you connect the USB keyboard to console’s USB keyboard port and the USB mouse to console’s

USB mouse port.

2. For security purposes, the ATEN Secure KVM Switch does not support wireless keyboards. Do not

attempt to connect a wireless keyboard to the switch.

3. During KVM operation, non-standard keyboards with integrated USB hubs and/or other

USB-integrated devices may not be fully supported due to the strict security standards and policy for

the ATEN Secure KVM Switch. If supported, only basic (HID) keyboard operations will function.

4. When the Secure KVM Switch is powered on, if the keyboard or mouse is rejected, the keyboard and

mouse will be inoperable (mouse cursor freezes and/or no key strokes will respond on the computer)

Note:

1. When the ATEN Secure KVM Switch is powered on, the Video LED lights green when the video

connection is up and running. The Video LED flashes when a non-qualified monitor is connected.

2. Due to the security policy, the ATEN Secure KVM Switch does not support a monitor hot-swap. If

you would like to change the console monitor, you must first power off the entire installation.

3. Connected monitor will be filtered when the ATEN Secure KVM Switch is powered on.

Non-qualified monitor will be rejected (Video LED flashes). Please refer to the LED Display for

detailed visual identification.


14

3. Plug your speakers into the console's speaker jack located on the unit’s front panel.

4. With a single-display Secure KVM Switch, using a KVM cable set (not supplied with this package

and must be purchased separately), plug the video connector into any available video socket in the

KVM port section of the switch, then plug the accompanying USB (keyboard/mouse or CAC) and

speaker connectors into their corresponding USB and speaker ports.

With a dual-display Secure KVM Switch, using a KVM cable set (not supplied with this package and

must be purchased separately), plug the video connector for your primary monitor into any available

video socket A in the KVM port section of the switch, then plug the accompanying USB

(Keyboard/Mouse or CAC) and speaker connectors into their corresponding USB and speaker sockets.

5. At the other end of the KVM cable set, plug the USB, video, and speaker cables into their respective

ports on the computer.

With a dual-display Secure KVM Switch, use another video cable for your second monitor (not

supplied with this package and must be purchased separately), to plug the video connector into video

socket B on the same KVM port section of the switch. At the other end of the video cable, plug the

monitor cable in to its respective port on the computer.

Note:

Only speaker connections are allowed. The use of an analogue microphone or line-in audio connection is

strictly prohibited.

Note:

1. Verify that all the plugs are in the same KVM port sockets (all in Port 1, all in Port 2, etc.). Each

socket is marked with an appropriate icon.

2. If the CAC reader function is to be disabled for certain PCs, it’s advised not to connect a USB CAC

cable in the installation.

Note:

1. Verify that the second video plug is in the same KVM port section as the first video plug (all in Port

1, all in Port 2, etc.). Each socket is marked with an appropriate icon.

2. Repeat steps 4, 5, 6, and 7 for each computer you are installing.

3. With a dual-display installation, for easier cabling at your site, you can also connect all the primary

video connectors to video sockets B, and secondary video connectors to video sockets A. Make sure

the console’s primary and secondary monitors are connected the same way.


15

6. Plug the USB Smart Card / CAC reader to the CAC port on the front panel.

.

7. Plug the female end of the power cord into the ATEN Secure KVM Switches' power socket; plug the

male end into an AC power source.

8. Turn on the ATEN Secure KVM Switch and check that the LEDs light up. The ATEN Secure KVM

Switch will start a self-test.

Note:

1. Only appropriate qualified USB authentication devices (e.g., Smart Card and CAC readers by default)

can be plugged into this port. During KVM operation, non-qualified or non-authorized USB devices

will be filtered and rejected (the CAC LED that has port focus will flash). Please refer to the LED

display for visual indications.

2. CDF (configurable device filtering) function can only be operated by authorized administrators.

Please refer to the Administrator’s Guide and Port Authentication Utility Guide for details.

Note:

The ATEN Secure KVM Switch performs a security self-test at power-on and at each power cycle. Front

panel LEDs will indicate the self-test status and test result. Please refer to the Operation section and LED

Display section for visual identification details.


16

Installation Diagram

13


17

Chapter 3

Operation

Powering On

When you power on, reset, or power cycle the ATEN Secure KVM Switch, the switch will perform a

self-test to check the unit’s integrity and security functions.

During the self-test � All Port and CAC LEDs will turn ON and then OFF. � The KVM focus will be switched to port 1 when the self-test completes successfully (port 1 LED

lights bright orange).

Self-test failure

In the case of a self-test failure, the Secure KVM Switch becomes inoperable, with front panel LED

combinations indicating the potential cause of the failure (such as a button jam or KVM integrity

compromise) � A pre-defined combination of port and CAC LEDs indicate the cause of the failure. � If all front panel LEDs (except the Power LED) flash continuously, it means KVM tampering is

detected or a self-test failure has occurred (except for Pushbutton jam; see below) � If Pushbutton jam is detected, both the port’s LEDs will flash.

For security, the ATEN Secure KVM Switch becomes inoperable if a self-test fails. Please verify your

KVM installation, pushbuttons, and power cycle the Secure KVM Switch if this should happen. If the

self-test failure remains, stop using the ATEN Secure KVM Switch immediately, remove it from

service and contact your ATEN dealer.

After the ATEN Secure KVM Switch is powered on and ready, power on your computers. By default

the ATEN Secure KVM Switch will switch to port 1 after a successful self-test.

The ATEN Secure KVM Switch filters and emulates both a mouse and keyboard on each port after the

unit is powered on. If the keyboard, mouse, monitor, or Smart card / CAC reader fails to operate

properly, make sure that you are using the appropriate peripherals (qualified and authorized

peripherals); then power off the ATEN Secure KVM Switch, check all the cable connections, and

power on the unit again.


18

Manual Switching

For increased security, the ATEN Secure KVM Switch offers manual port-switching only. This is

achieved by pressing the port selection pushbuttons located on the unit’s front panel.

Press and release a port selection pushbutton to bring the KVM focus to the computer attached to its

corresponding port (see Port ID Numbering, below). To meet maximum security and channel isolation

requirements, keyboard, mouse, video, audio, and USB CAC reader ports will be switched together.

The Selected Port LED lights orange to indicate that the computer attached to its corresponding port

has the KVM focus (keyboard, mouse, monitor, audio, and CAC reader).

The PC that has the port focus should be able to detect the peripherals after port switching.

If the PC fails to detect the keyboard, mouse, or CAC card reader:

- Verify that the keyboard, mouse, and/or CAC card reader is qualified.

- Verify if the keyboard, mouse, or CAC reader hasn’t failed.

- For USB CAC card reader (USB authentication device), please make sure the USB CAC cable has

been securely connected, and the CAC function is enabled.

- For USB CAC card reader port, please contact your administrator to verify if the device has been

authorized.

Port ID Numbering

Each KVM port on the ATEN Secure KVM Switch is assigned a port number (1–2 for the 2-Port

models; 1–4 for the 4-Port models; 1–8 for 8-Port models). The port numbers are marked on the rear of

the switch. See Rear View, page 7. The port ID of a computer is derived from the KVM port number it

is connected to.

LED Display

In addition to the Power LED, the ATEN Secure KVM Switch has Port LEDs (Online and Selected),

keyboard lock (Num Lock/Caps Lock/Scroll Lock) LEDs and CAC LEDs that are built into the front

panel to indicate port / keyboard / CAC reader operating status. A video LED is located on back panel

to indicate the operating status of the video connection. These LEDs also serve as the alarm notification

for KVM security issues.


19

LEDLEDLEDLED IndicationIndicationIndicationIndication Power LED The Power LED is on the front panel and lights blue to indicate that the KVM switch is powered on. Video LED The Video LED is located on the back panel next to each video connector. � The LED lights green when the video connection is up and running. � The LED flashes when a non-qualified monitor is connected. Port LED

The Port LEDs are located on the front panel to indicate the port selection or connection status. � Online – Lights dim orange to indicate that the computer attached to its corresponding port connected and powered on. � Selected – Lights bright orange to indicate that the computer attached to its corresponding port has the KVM focus. Note: Note: Note: Note: 1. Port and CAC LEDs will flash constantly when a chassis intrusion is detected. See Chassis Intrusion Detection section for details. 2. Port and CAC LEDs also indicate the status of the Secure KVM self-test status. See Operation section for further details.

CAC LED The CAC LEDs are located on front panel to indicate CAC reader selection or connection status. Online – Lights dim green to indicate that the computer attached to its corresponding port has a USB CAC reader cable connection and the CAC function is enabled. Selected – Lights bright green to indicate that the CAC function is enabled and the computer attached to its corresponding port has the CAC focus. None – No lights indicate the cable is not connected or CAC has been disabled. Warning - Flashes to indicate that a non-qualified USB Smart card / CAC reader is connected when the corresponding port has the focus. Note: Note: Note: Note: - CAC function of each port can be enabled or disabled by pressing the port selection button for more than 3 seconds (this is a toggle). Please refer to Operation section for details. - Port and CAC LEDs will flash constantly when a chassis intrusion is detected. See Chassis Intrusion Detection section for further details. Num Lock LED Lights green to indicate the Num Lock is enabled Caps Lock LED Lights green to indicate the Caps Lock is enabled


20

Chassis Intrusion Detection

To help prevent malicious tampering with the ATEN Secure KVM Switch, the switch becomes

inoperable and all front panel LEDs (except the Power LED) flash constantly when a chassis intrusion

(such as the cover being removed) is detected.

The intrusion detection feature is an always-on function. If all your front panel LEDs (except the Power

LED) flash continuously or the switch’s enclosure appears breached, avoid using this product and

contact your ATEN dealer.

Smart Card and CAC Reader

The USB Smart Card / CAC reader function of each port can be enabled or disabled (enabled by

default). Press the port selection pushbutton for more than 3 seconds then release it, to enable/disable

the CAC reader function for that port (this is a toggle feature). The CAC LEDs are used to indicate the

CAC reader operation status.

If the CAC reader function is to be disabled for certain PCs, it’s advised not to connect a USB CAC

cable to the installation.

Scroll Lock LED Lights green to indicate the Scroll Lock is enabled


21

Appendix

Safety Instructions

General � This product is for indoor use only. � Read all of these instructions. Save them for future reference. � Follow all warnings and instructions marked on the device. � Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious

damage will result. � Do not use the device near water. � Do not place the device near, or over, radiators or heat registers. � The device cabinet is provided with slots and openings to allow for adequate ventilation*.To ensure

reliable operation, and to protect against overheating, the cabinet must never be blocked or covered. � The device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block its

ventilation openings*. Placing devices without slots or openings on a soft surface will affect the heat

dissipation. � The device should not be placed in a built in enclosure unless adequate ventilation has been

provided. � Never spill liquid of any kind on the device. � Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a

damp cloth for cleaning. � The device should be operated from the type of power source indicated on the marking label. If you

are not sure of the type of power available, consult your dealer or local power company. � The device is designed for IT power distribution systems with 230V phase-to-phase voltage. � To prevent damage to your installation it is important that all devices are properly grounded. � The device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable

to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not attempt

to defeat the purpose of the grounding-type plug. Always follow your local/national wiring codes. � Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that

they cannot be stepped on or tripped over. � If an extension cord is used with this device make sure that the total of the ampere ratings of all

products used on this cord does not exceed the extension cord ampere rating. Make sure that the total of

all products plugged into the wall outlet does not exceed 15 amperes. � To help protect your system from sudden, transient increases and decreases in electrical power, use a

surge suppressor, line conditioner, or uninterruptible power supply (UPS). � Position system cables and power cables carefully; Be sure that nothing rests on any cables. � Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage

points or short out parts resulting in a risk of fire or electrical shock.


22

� Do not attempt to service the device yourself. Refer all servicing to qualified service personnel. � If the following conditions occur, unplug the device from the wall outlet and bring it to qualified

service personnel for repair. � The power cord or plug has become damaged or frayed. � Liquid has been spilled into the device. � The device has been exposed to rain or water. � The device has been dropped, or the cabinet has been damaged. � The device exhibits a distinct change in performance, indicating a need for service. � The device does not operate normally when the operating instructions are followed. � Suitable for installation in Information Technology Rooms in accordance with Article 645 of the

National Electrical Code and NFPA 75.

CAUTION: Never attempt to replace battery or open the switch’s enclosure.

*Note: Not all devices have slots or openings to allow for ventilation


23

Consignes de Sécurité

Général

� Ce produit est destiné exclusivement à une utilisation à l’intérieur. � Veuillez lire la totalité de ces instructions. Conservez-les afin de pouvoir vous y référer

ultérieurement. � Respectez l’ensemble des avertissements et instructions inscrits sur l’appareil. � Ne placez jamais l’unité sur une surface instable (chariot, pied, table, etc.). Si l’unité venait à tomber,

elle serait gravement endommagée. � N’utilisez pas l’unité à proximité de l’eau. � Ne placez pas l’unité à proximité de ou sur des radiateurs ou bouches de chaleur. � Le boîtier de l’unité est destiné à assurer une ventilation adequate*. Pour garantir un fonctionnement

fiable et protéger l’unité contre les surchauffes, le boîtier de l’unité ne doit jamais être obstrué ou

couvert. � L’unité ne doit jamais être placée sur une surface molle (lit, canapé, tapis, etc.) car ceci obstruerait

les ouvertures de ventilation*. Le fait de placer des appareils sans fente ni ouverture sur une surface

souple affecte la dissipation thermique. � L’appareil ne doit pas être placé dans une enceinte intégrée à moins de lui fournir une ventilation

adéquate. � Ne renversez jamais de liquides de quelque sorte que ce soit sur l’unité. � Débranchez l’appareil de la prise secteur avant nettoyage. Ne pas utiliser de nettoyant liquide ou en

aérosol. Utiliser une chiffon humidifié pour le nettoyage. � L’appareil doit être alimenté par le type de source indiqué sur l’étiquette. Si vous n’êtes pas sûr du

type d’alimentation disponible, consultez votre revendeur ou le fournisseur local d’électricité. � L’appareil est conçu pour les systèmes de distribution d’alimentation informatique avec une tension

phase à phase de 230V � Afin de ne pas endommager votre installation, vérifiez que tous les périphériques sont correctement

mis à la terre. � L’unité est équipée d’une fiche de terre à trois fils. Il s’agit d’une function de sécurité. Si vous ne

parvenez pas à insérer la fiche dans la prise murale, contactez votre électricien afin qu’il remplace cette

dernière qui doit être obsolète. Respectez toujours les codes de câblage en vigueur dans votre

région/pays. � Veuillez à ce que rien ne repose sur le cordon d’alimentation ou les câbles. Acheminez le cordon

d’alimentation et les câbles de sorte que personne ne puisse marcher ou trébucher dessus. � En cas d’utilisation d’une rallonge avec cette unité, assurez-vous que le total des ampérages de tous

les produits utilisés sur cette rallonge ne dépasse pas l’ampérage nominal de cette dernière.

Assurez-vous que le total des ampérages de tous les produits branchés sur la prise murale ne dépasse


24

pas 15 Ampères. � Pour contribuer à protéger votre système contre les augmentations et diminutions soudaines et

transitoires de puissance électrique, utilisez un parasurtenseur, un filtre de ligne ou un système

d’alimentation sans coupure (UPS). � Placez les câbles du système et les câbles d’alimentation avec précaution ; veillez à ce que rien ne

repose sur aucun des câbles. � N’insérez jamais d’objets de quelque sorte que ce soit dans ou à travers les fentes du boîtier. Ils

pourraient entrer en contact avec des points de tension dangereuse ou court-circuiter des pièces,

entraînant ainsi un risqué d’incendie ou de choc électrique. � N’essayez pas de réparer l’unité vous-même. Confiez toute opération de réparation à du personnel

qualifié. � Si les conditions suivantes se produisent, débranchez l’unité de la prise murale et amenez-la à un

technicien qualifié pour la faire réparer: � Le cordon d’alimentation ou la fiche ont été endommagés ou éraillés. � Du liquide a été renversé dans l’unité. � L’unité a été exposée à la pluie ou à l’eau. � L’unité est tombée ou le boîtier a été endommagé. � Les performances de l’unité sont visiblement altérées, ce qui indique la nécessité d’une réparation. � L’unité ne fonctionne pas normalement bien que les instructions d’utilisation soient respectées. � Peut être installé dans des salles de matériel de traitement de l’information conformément à l’article

645 du National Electrical Code et à la NFPA 75.

ATTENTION : Ne jamais tenter de remplacer la batterie interne ni d'ouvrir le boîtier du commutateur.

*Remarque : Tous les appareils ne disposent pas de fentes ou d’ouvertures qui permettent la

ventilation.


25

Technical Support

International � For online technical support – including troubleshooting and

documentation: http://eservice.aten.com � For telephone support, See Telephone Support, page iv:

North America

Email Support [email protected] Online Technical Support

Troubleshooting Documentation Software Updates

http://www.aten-usa.com/support

Telephone Support 1-888-999-ATEN ext 4988

When you contact us, please have the following information ready beforehand: � Product model number, serial number, and date of purchase. � Your computer configuration, including operating system, revision level,

expansion cards, and software. � Any error messages displayed at the time the error occurred. � The sequence of operations that led up to the error. � Any other information you feel may be of help.


26

Specifications

ATEN DisplayPort Single Display Secure KVM

Function CS1182DP CS1184DP CS1188DP

Computer

Connections

Direct 2 4 8

Max. 2 4 8

Console Connections 1 Direct

Port Selection Pushbutton

Connectors

Console

Ports

Keyboard 1 x 6-pin Mini-DIN Female (Purple)

1 x USB Type A Female (2/4-Port Black; 8-Port White)

Video 1 x HDMI 1.4 Female (Black)

Mouse 1 x 6-pin Mini-DIN Female (Green)


Speaker 1 x Mini Stereo Jack Female (Green)

Microphone N/A

CAC 1 x USB Type A Female (Black)

KVM

Ports

Keyboard/

Mouse

2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Video 2x DisplayPort 1.2

Female (Black)

4x DisplayPort 1.2

Female (Black)

8x DisplayPort 1.2

Female (Black)

CAC 2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Speaker

2 x Mini Stereo

Jack Female

(Green)

4 x Mini Stereo

Jack Female

(Green)

8 x Mini Stereo

Jack Female

(Green)

Microphone N/A

Power 1 x 3-prong AC Socket

Switches

Port 2 x Pushbuttons 4 x Pushbuttons 8 x Pushbuttons

Reset 1 x Semi-recessed Pushbutton

Power 1 x Rocker

LEDs

On Line / Selected 2 (Orange) 4 (Orange) 8 (Orange)

CAC activated 2 (Green) 4 (Green) 8 (Green)

Power 1 (Blue)

Key Lock LED 3 (Green; Num Lock, Caps Lock, Scroll Lock)

Console Video 1 (Green, on back panel)

Emulation Keyboard/Mouse USB


27

Video Max. 3840 x 2160 @ 30 Hz (UHD)

Scan Interval N/A

I/P Rating 100–240V~ ; 50-60 Hz; 1A

Environment

Operating Temp. 0–50°C

Storage Temp. -20–60°C

Humidity 0–80% RH, Non-condensing

Physical

Properties

Housing Metal

Weight 1.78kg 1.79kg 3.05kg

Dimensions

(L x W x H)

335 x 164 x 44

mm

335 x 164 x 44

mm

432 x 205 x 66

mm

ATEN DisplayPort Dual Display Secure KVM

Function CS1142DP CS1144DP CS1148DP

Computer

Connections

Direct 2 4 8

Max. 2 4 8



Connectors

Console

Ports







Microphone N/A


KVM

Ports

Keyboard/

Mouse

2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Video 4x DisplayPort 1.2

Female (Black)

8x DisplayPort 1.2

Female (Black)

16xDisplayPort

1.2 Female (Black)

CAC 2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Speaker

2 x Mini Stereo

Jack Female

(Green)

4 x Mini Stereo

Jack Female

(Green)

8 x Mini Stereo

Jack Female

(Green)

Microphone N/A


28


Switches



Power 1 x Rocker

LEDs



Power 1 (Blue)




Video Max. 3840 x 2160 @ 30 Hz (UHD)

Scan Interval N/A

I/P Rating 100–240V~ ; 50-60 Hz; 1A

Environment




Physical

Properties

Housing Metal


Dimensions (L x W x H) 335 x 164 x 66

mm

335 x 164 x 66

mm

432 x 205 x 66

mm

ATEN HDMI Single Display Secure KVM

Function CS1182H CS1184H CS1188H

Computer

Connections

Direct 2 4 8

Max. 2 4 8



Connectors Console

Ports







Microphone N/A


29


KVM

Ports

Keyboard/

Mouse

2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Video 2 x HDMI 1.4

Female (Black)

4 x HDMI 1.4

Female (Black)

8 x HDMI 1.4

Female (Black)

CAC 2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Speaker

2 x Mini Stereo

Jack Female

(Green)

4 x Mini Stereo

Jack Female

(Green)

8 x Mini Stereo

Jack Female

(Green)

Microphone N/A


Switches



Power 1 x Rocker

LEDs



Power 1 (Blue)


Video 1 (Green, on back panel)


Video Max. 3840 x 2160 @ 30 Hz (UHD); 1920 x 1080 (FHD)

Scan Interval N/A

I/P Rating 100–240V~ ; 50-60 Hz; 1A

Environment




Physical

Properties

Housing Metal



mm

335 x 164 x 44

mm

432 x 205 x 66

mm


30

ATEN HDMI Dual Display Secure KVM

Function CS1142H CS1144H CS1148H

Computer

Connections

Direct 2 4 8

Max. 2 4 8



Connectors

Console

Ports







Microphone N/A


KVM Ports

Keyboard/

Mouse

2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Video 4 x HDMI 1.4

Female (Black)

8 x HDMI 1.4

Female (Black)

16 x HDMI 1.4

Female (Black)

CAC 2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Speaker

2 x Mini Stereo

Jack Female

(Green)

4 x Mini Stereo

Jack Female

(Green)

8 x Mini Stereo

Jack Female

(Green)

Microphone N/A


Switches



Power 1 x Rocker

LEDs



Power 1 (Blue)




Video Max. 3840 x 2160 @ 30 Hz (UHD); 1920 x 1080 (FHD)


31

Scan Interval N/A

I/P Rating 100–240V~ ; 50-60 Hz; 1A

Environment




Physical

Properties

Housing Metal



mm

335 x 164 x 66

mm

432 x 205 x 66

mm

ATEN DVI Single Display Secure KVM

Function CS1182D CS1184D CS1188D

Computer

Connections

Direct 2 4 8

Max. 2 4 8



Connectors

Console

Ports



Video 1 x DVI-I Dual Link Female (White)




Microphone N/A


KVM Ports

Keyboard/

Mouse

2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Video 2 x DVI-I Dual Link

Female (White)

4 x DVI-I Dual Link

Female (White)

8 x DVI-I Dual Link

Female (White)

CAC 2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Speaker

2 x Mini Stereo

Jack Female

(Green)

4 x Mini Stereo

Jack Female

(Green)

8 x Mini Stereo

Jack Female

(Green)

Microphone N/A



32

Switches



Power 1 x Rocker

LEDs



Power 1 (Blue)


Video 1 (Green, on back panel)


Video 3840 x 2160 @ 30 Hz*; DVI Dual Link: 2560 x 1600; DVI

Single Link: 1920 x 1200; DVI-A: 2048 x 1536

Scan Interval N/A

I/P Rating 100–240V~ ; 50-60 Hz; 1A

Environment




Physical

Properties

Housing Metal



mm

335 x 164 x 44

mm

432 x 205 x 66

mm

* DVI Secure KVM Switches offer 3840 x 2160 @ 30 Hz video output on compatible HDMI-interfaced

monitors/computers with ATEN DVI-to-HDMI KVM cables

ATEN DVI Dual Display Secure KVM

Function CS1142D CS1144D CS1148D

Computer

Connections

Direct 2 4 8

Max. 2 4 8



Connectors Console

Ports



Video 2 x DVI-I Dual Link Female (White)




33


Microphone N/A


KVM Ports

Keyboard/

Mouse

2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Video 4 x DVI-I Dual Link

Female (White)

8 x DVI-I Dual Link

Female (White)

16 x DVI-I Dual

Link Female

(White)

CAC 2 x USB Type-B

Female (White)

4 x USB Type-B

Female (White)

8 x USB Type-B

Female (White)

Speaker

2 x Mini Stereo

Jack Female

(Green)

4 x Mini Stereo

Jack Female

(Green)

8 x Mini Stereo

Jack Female

(Green)

Microphone N/A


Switches



Power 1 x Rocker

LEDs



Power 1 (Blue)




Video 3840 x 2160 @ 30 Hz*; DVI Dual Link: 2560 x 1600; DVI

Single Link: 1920 x 1200; DVI-A: 2048 x 1536

Scan Interval N/A

I/P Rating 100–240V~ ; 50-60 Hz; 1A

Environment




Physical

Properties

Housing Metal



mm

335 x 164 x 66

mm

432 x 205 x 66

mm

* DVI Secure KVM Switches offer 3840 x 2160 @ 30 Hz video output on compatible HDMI-interfaced

monitors/computers with ATEN DVI-to-HDMI KVM cables


34

Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM

DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF

THE PRODUCT, DISK, OR ITS DOCUMENTATION.

The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this

documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.

The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any

individual or entity of such revisions, or update. For further inquiries, please contact your direct vendor.

2/4/8-Port USB DVI/HDMI/DisplayPort Single/Dual ... - ATEN

Documents