Page 1
Wen 2307 Power Switch ReplacementThis guide is here to help the user replace the power switch on their Wen 2307 rotary tool.
撰写者: Joshua Bowery
Wen 2307 Power Switch Replacement 草案: 2016-05-23指南 ID: 56698 -
æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。
© iFixit — CC BY-NC-SA zh.iFixit.com 1 / 6 页
Page 2
介介绍绍
One possible reason for your device not powering on is a damaged power switch. Use this guide toreplace it.
工具工具:Phillips #2 Screwdriver (1)
Wen 2307 Power Switch Replacement 草案: 2016-05-23指南 ID: 56698 -
æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。
© iFixit — CC BY-NC-SA zh.iFixit.com 2 / 6 页
Page 3
步骤步骤 1 — Front Panel
Unscrew the locking sleeve.
步骤步骤 2
Remove the hanging clip.
Wen 2307 Power Switch Replacement 草案: 2016-05-23指南 ID: 56698 -
æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。
© iFixit — CC BY-NC-SA zh.iFixit.com 3 / 6 页
Page 4
步骤步骤 3
Unscrew the six 8mm PH2 screws.
步骤步骤 4
While pressing the spindle lockbutton, unscrew the collet nut andremove it along with the brass collet.
Wen 2307 Power Switch Replacement 草案: 2016-05-23指南 ID: 56698 -
æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。
© iFixit — CC BY-NC-SA zh.iFixit.com 4 / 6 页
Page 5
步骤步骤 5
To remove the front panel, pry thedevice apart while holding the devicewith the other hand.
The front panel should come outeasily.
步骤步骤 6 — Power Switch
Firmly grasp and lift out powerswitch.
Wen 2307 Power Switch Replacement 草案: 2016-05-23指南 ID: 56698 -
æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。
© iFixit — CC BY-NC-SA zh.iFixit.com 5 / 6 页
Page 6
To reassemble your device, follow these instructions in reverse order.
步骤步骤 7
Firmly grasp and disconnect cables.
Make sure to mark your cablepositions so you do not reversethem when putting back together.
Wen 2307 Power Switch Replacement 草案: 2016-05-23指南 ID: 56698 -
æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。
© iFixit — CC BY-NC-SA zh.iFixit.com 6 / 6 页