PUSH BUTTONS/SWITCHES G1 Selector Switches Type 3 Knob type 2 Positions Single Fixed Position 4 Lever type 2 Positions Single Fixed Position 5 Knob type 3 Positions Double Auto Spring Return 6 Lever type 3 Positions Double Auto Spring Return 7 Knob type 3 Positions Double Fixed Position 8 Lever type 3 Positions Double Fixed Position Color R Red W White Contack block A 1 normally open block B 1 normally close block 2A 2 normally open blocks 2B 2 normally close blocks AB 1 A Block & 1 B Block S2SR– S 3 R A Ordering Information Size E2 Ø30mm E3 Ø40mm E4 Illuminated Ø40mm E5 Ø60mm CONTACT BLOCK A Normally Open B Normally Closed LED* D LED 12~30V AC/DC L LED 100~220V AC * Only available with sized E4 series. S2ER – E3 R A D Ordering Information Emergency Stops Small Head Large Head unit: mm 71.4 3 positions 2 positions unit: mm Pilot Lamps Head Type 1 Dome Head 2 Horn Head 3 Flat Head Color R Red B Blue G Green Y Yellow W White LED D LED 12~30V AC/DC L LED 100~220V AC L2RR– L 1 R D Ordering Information unit: mm Dome Head Horn Head Flush Head Knob Type Lever Type 22mm Push Buttons and Switches
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PU
SH B
UT
TO
NS/
SWIT
CH
ES
G1
Selector Switches
Type
3 Knob type 2 PositionsSingle Fixed Position
4 Lever type 2 PositionsSingle Fixed Position
5 Knob type 3 PositionsDouble Auto Spring Return
6 Lever type 3 PositionsDouble Auto Spring Return
7 Knob type 3 PositionsDouble Fixed Position
8 Lever type 3 PositionsDouble Fixed Position
Color
R Red
W White
Contack
block
A 1 normally open block
B 1 normally close block
2A 2 normally open blocks
2B 2 normally close blocks
AB 1 A Block & 1 B Block
S2SR– S 3 R A
Ordering Information
Size
E2 Ø30mm
E3 Ø40mm
E4 Illuminated Ø40mm
E5 Ø60mm
CONTACT
BLOCK
A Normally Open
B Normally Closed
LED*
D LED 12~30V AC/DC
L LED 100~220V AC
* Only available with sized E4 series.
S2ER – E3 R A D
Ordering InformationEmergency StopsSmall Head Large Head
unit: mm71
.4
3 positions2 positions
unit: mm
Pilot Lamps
HeadType
1 Dome Head
2 Horn Head
3 Flat Head
Color
R Red
B Blue
G Green
Y Yellow
W White
LED
D LED 12~30V AC/DC
L LED 100~220V AC
L2RR– L 1 R D
Ordering Information
unit: mm
Dome Head
Horn Head Flush Head
Knob Type
Lever Type
22mm Push Buttons and Switches
G2
Color
R Red
B Blue
G Green
Y Yellow
K Black
CONTACT
BLOCK
A Normally Open
B Normally Closed
S2PR - P1 R - A
Ordering InformationMomentary Push Button
Illuminated Push Button
Color
R Red
B Blue
G Green
Y Yellow
W White (Clear)
CONTACT
BLOCK
A Normally Open
B Normally Closed
LED*
D LED 12~30V AC/DC
L LED 100~220V AC
S2PR - P3 R - A D
Ordering Information
DoublePush Button
Illuminated Auto Spring Return TypeS2TR-P3WABD LED 12~30V AC/DC
S2TR-P3WABD LED 100~220V AC
Ordering Information
unit: mm
unit: mm
unit: mm
Specifications
G3
PU
SH B
UT
TO
NS/
SWIT
CH
ES
AccessoriesFlush Mount Adaptor Water Proof Cap
Buzzer Specifacations
B2NB-B1D
DimensionsRated Voltage/ Current
Protection
Sound Level
Sound Mode Intermittent (defalt), Continuous
ImpactEndurance
No movement
Vibration
Operating Temperature
Operating Humidity
StorageTemperature
Life (Electrical)
Operation Frequency
28.5
64.5
21
Panel T= M
ax. 4mm
Contact Blocks
ModelNormally Open Normally Closed
SA-CA SA-CB
Appearance
Capacity 110V AC 10A/ 220V AC 5A
Approval
Model SA-LD SA-LA
Appearance
Operating Voltage 12~30V AC/DC 110~220V AC
Current Consumption 4~10mA
LED Life 50,000 hours
Approval
LED Blocks
Push button
Mounting panelLocking ring
Flush MountAdaptor
G4
PU
SH B
UT
TO
NS/
SWIT
CH
ESØ8,10,12 Switches/Buttons
Dimensions Pre-Caution
Specifications
Panel thickness
Unit: mm
A B C
Model
08 Ø08mm Control Switch
10 Ø10mm Control Switch
12 Ø12mm Control Switch
Description
1 Pilot Lamp
2 Momentary
3 Alternative
Operator
7 Lighted Round
8 Lighted Square
9 Lighted Rectangular
Contact
Arrangement
0 None
1 SPST (1a+1b)
2 DPDT (2a+2b)
Lens Color
R Red
G Green
Y Yellow
W White
B Blue
K 08 - 1 7 0 R
Ordering Information
K08 Series K10 Series K12 Series
A 9 12 14
B 9 12 14
C 12 16 18
When using Ø8-, Ø10- and Ø12-small control switches as the main power switch for the control unit, follow the instructions below for ensure long life and safety of the device.
- When rectifying the AC current for the DC power for lighting, the DC power must be a constant voltage source with a ripple range of 10 % or less.- Do not apply excessive impact or force to prevent damage to the product.- Excessively high soldering temperature and prolonged soldering time may lead to the damage to the product. Comply with the specifications.- The product has a built-in current limiting resistor, and no additional resistor is required.- The brightness of the LED lamp may decrease to 50 % of the initial level after its lifetime.* Specifications and materials may change to improve the product quality.
K-Series
Contact
Material Ag alloy
Rated Norminal current(resistance load)
1A 24V DC1A 120V AC0.5A 240V AC
Initial Carry Current 3AMaximum switch voltage 250V AC , 110V DC
Minimum switching rating 100mA 5V DC
LEDNorminal Current 15mA
Expected Life 50,000hrsNorminal Volatage 6, 12, 24V DC R, G, Y, B, W
General Information
Dielectric Strenth 2,000V AC 1Min.
Expected LifeMechanical Reset: Min 200,000Mechanical main Terence: Min 100,000Electrial: Min 100,000
Degree of Protection IP40Soldering temperature 20W 5sec/ 260°C 3secAmbient Temperature -25°C ~ +55°C (with no icing)
G5
PU
SH B
UT
TO
NS/
SWIT
CH
ES Ø16 Switches/Buttons K16 Series
GeneralSpec
Contact Resistance Max. 50mΩInsulation Resistance 100MΩ at 500V DC
1 Round2 Square7 LED Illuminated Round8 LED Illuminated Square9 LED Illuminated RectangularA Operator RoundB Operator Square
Head Color
R Red
G Green
Y Yellow
W White
B Blue
K Black (Non-Illuminated type)
OperatingHead Type
RE Lifted Flat Pilot LampRF Flat Type Pilot LampRX Extended Type Pilot LampN29 Ø29N40 Ø40N65 Ø65AL AL GuardB29 Full Guard Ø29B40 Full Guard Ø40B65 Full Guard Ø65C29 Metal Full Guard Ø29C40 Metal Full Guard Ø40C65 Metal Full Guard Ø65S2R 2 Step Auto Return Knob
S3LR 3 Step Both Auto Return Knob
S3L 3 Step Left Auto Return Knob
S3R 3 Step Right Auto Return Knob
L2R 2 Step Auto Return Lever
L3LR 3 Step Both Auto Return Lever
L3L 3 Step Left Auto Return Lever
L3R 3 Step Right Auto Return Lever
L Lever TypeDR Arrow Marked
Voltage
None - No Voltage24VDC110VDC110VAC220VAC
General Spec
Insulation Resistance 100MΩ at 500V DC
Dielectric Strength 1,800VAC for 1 Min.
Torque 0.8N•m (8.16kgf•cm)
Degree of Protection IP40
Frequency of Alteration 30Minc.Ambient Temperature Operation: -25°C~ +70°C, Storage: -30°C~+80°C
Expected LifeElectrical Min. 200,000 hrsMechanical Min. 2,000,000 (Emergency, Selector: Min. 500,000)
Contact Resistance 50mΩ
LEDLamp
RatedCurrent
ACFilament 160mALED 15mA
DCFilament 50mALED 15mA
Expected LifeFilament Min. 1,000 hrsLED Min. 50,000 hrs
Specifications
- 22 mm (4/5”) Mounting Holes- IP 40 rating (IP65 optional) Water & dust proof)- Available Maintained Holder- Contacts for SPDT or DPDT, 10A 110VAC- Illuminated Mushroom & Selector switches for Round, square heads- Available Flush mounting guide (Aluminum)
G12
PU
SH B
UT
TO
NS/
SWIT
CH
ESDimensions Push Buttons
Illuminated Push Buttons
Momentary
K22 Series
K22 Series
(K22 Series Only)
K30 Series
K30 Series
Maintained
Maintain Holder
Body
15.0
Push Selector
Roun
Squar
Flat
I/O
DC
AC
Body
Extended Flat
G13
PU
SH B
UT
TO
NS/
SWIT
CH
ES Illuminated/Non-Illuminated Full Guard Push Buttons
Illuminated*/Non-Illuminated Selector Switches (*Available only with Knob Type)
K22 Series
K30 Series
RoundK22/30 Series
SquareK22 Series Only
2 Step Knob Type 3 Step Lever Type2 Step 3 Step
DC Body AC BodyNon-Illuminated Switch Body Illuminated Switch Body
G14
PU
SH B
UT
TO
NS/
SWIT
CH
ES
DC Body AC Body
Non-Illuminated Switch Body Illuminated Switch Body
A Water proofN40 Mushroom Push Ø40N65 Mushroom Push Ø65B40 Full Guard Ø40B65 Full Guard Ø65H65 Metal Portable Ø65F65 Metal Full Guard Portable Ø65C65 Meta Halfmoon Guard Ø65
S Knob Type SelectorL Lever Type SelectorK Key Switch