224_800 Cycles UMS3 Programming Guide.pdf

GAST

GAST

GAST

GAST

Contents1 Introduction2 Cycles2.1 Machining cycles for turning2.1.1 L93 Recessing cycle2.1.2 L95 Stock removal cycle (paraxial roughing)2.1.3 L97 Thread cutting cycle2.1.4 L99 Chaining of threads (Four-point thread cutting cycle)2.1.5 L98 Deep hole drilling cycle

2.2 Machining cycles for drilling and milling2.2.1 Drilling cycles G81 to G892.2.2 Drilling and milling pattern2.2.2.1 L900 Drilling pattern2.2.2.2 L901 Milling pattern "SLOT"2.2.2.3 L902 Milling pattern "ELONGATED HOLE"2.2.2.4 L903 Milling rectangular pocket2.2.2.5 L930 Milling circular pocket

2.3 L999 Clear buffer memory