[ 1 ] 22 December 2011 Notes on jet-clump interaction targets (Black 1 – Black 4) for NLUF shots of 20 January 2011 Compilation of radiographs received from Robert Stamm on 21 December 2010, with approximate dimensions added. Red lines are outline of jet-forming washer and axis of jet. Black lines and figures show approximate positions of bottom, top, and centre-of-gravity of clump of particles. Pre-shot radiography axes are -45, 0, +45 degrees. Radiography axes in experiment are -36 and +36 degrees. End view of target does not have sufficient dynamic range to show ball positions in pre-shot radiographs. Slides 2 – 5 are pre-shot radiographs. Slide 6 is email from Robert Stamm. Slides 7 – 12 are target request. The manufactured targets are a good approximation to what was requested, although the ball cluster is about 0.25 – 0.75 mm further downstream than requested. Need decision on order of preference for these targets, and choice of backlighter times.
22 December 2011 Notes on jet-clump interaction targets (Black 1 – Black 4) for NLUF shots of 20 January 2011 Compilation of radiographs received from Robert Stamm on 21 December 2010, with approximate dimensions added. - PowerPoint PPT Presentation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
[ 1 ]
22 December 2011
Notes on jet-clump interaction targets (Black 1 – Black 4) for NLUF shots of 20 January 2011
Compilation of radiographs received from Robert Stamm on 21 December 2010, with approximate dimensions added.
Red lines are outline of jet-forming washer and axis of jet. Black lines and figures show approximate positions of bottom, top, and centre-of-gravity of clump of particles.
Pre-shot radiography axes are -45, 0, +45 degrees. Radiography axes in experiment are -36 and +36 degrees.
End view of target does not have sufficient dynamic range to show ball positions in pre-shot radiographs.
Slides 2 – 5 are pre-shot radiographs.Slide 6 is email from Robert Stamm.Slides 7 – 12 are target request.
The manufactured targets are a good approximation to what was requested, although the ball cluster is about 0.25 – 0.75 mm further downstream than requested.
Need decision on order of preference for these targets, and choice of backlighter times.
Attached are the radiographs of the “Type A” 300 um offset foam assemblies (Jet and multi-ball interaction : OMG-ASM-0164 (nominally 4 targets with approx 25 balls, set 300 um off center) :Use components C-2, C-3, C-4, C-5.
It was difficult to penetrate through the titanium and gold ablators to see the offset balls in the foam. Let me know if these are acceptable. If not, we can try a much longer exposure when we come back the week of 1/3/11 after the holiday shutdown and see if that will work.
I will be out of office 12/22 through 1/3/11.
We will send the rest with the QA report to you by ~ 1/12/11.
Thanks,
Robert Stamm
Schafer Corporation at Sandia National Labs1515 Eubank SE RM.1241 BLDG.962 MS1196Albuquerque, NM 87123Desk 505 284 8385 Pager 505 951 5605 FAX 505 844 0573http://www.schafercorp.com/Company/sl/icf.htm
[ 7 ]
NLUF AstroShkClmp-11A : Jet and multi-ball targets
Drawings SK-2010-11-08-A (001 – 005), version 2
Requirement is :
4 targets with approx. 25 number balls of 125 µm dia.
[ 8 ]
1100(tol. -100, +200)
4000 dia. nominal
1000 dia. spherical region containing embedded particles. Centre of sphere is radially offset 300 from centre line of hohlraum.
RF foam (0.3 g/cc)
4000 nominal
4000
dia
.
1600
dia
.
1200
dia
. LE
H
1200
50 end-wall thickness
50 side-wall thickness
SK-2010-11-08-A-001Target components for NLUF AstroShkClmp-11A, jet and multi-ballDimensions in µm8 November 2010
100
125
700
CL
Gold and titanium disks supplied by AWE
Hohlraum
Hohlraum and experimental package
[ 9 ]
45.0° 45.0°
1.5 mm (3 positions, as shown)
Alignment fibres, 3 positions as shown. Confirm fibres are visible in XTVS and YTVS views (see SK-2010-11-08-A-005)
A
A
View on B
B
Fiducial grid
P7
Mounting stalk10.8°
P6
Section AA
SK-2010-11-08-A-002-ver2Target components for NLUF AstroShkClmp-11A, jet and multi-ball : alignment fibre positionsThird angle projectionDimensions in µm9 November 2010
H2
[ 10 ]
P7
H2
P6
36°
300 radial offset from centre line of hohlraum
LOS to TIM3 in H18
View on CSection AA
1100 (tol. -100, +200)
A
A
C
Fiducial grid
SK-2010-11-08-A-003-ver2Target components for NLUF AstroShkClmp-11A, jet and multi-ball : embedded particle positionsThird angle projectionDimensions in µm9 November 2010
[ 11 ]
3300
Cut off corner of grid, to avoid left-right uncertainty in pre-shot radiographs
B
View on AView on B
A
Fiducial grid
SK-2010-11-08-A-004-ver2Target components for NLUF AstroShkClmp-11A, jet and multi-ball : fiducial grid positionThird angle projectionDimensions in µm9 November 2010
[ 12 ]
SK-2010-11-08-A-005Target components for NLUF AstroShkClmp-11A, jet and multi-ball : XTVS and YTVS views and backlightersDimensions in mm8 November 2010