2021 HVAC SOLUTIONS - .NET Framework

2021

HVAC SOLUTIONSFOR POOLS, LEISURE CENTRES, BUILDINGS, AGRICULTURE AND STORAGE

About us

Originally founded in 1954, the Dantherm Group is a European leader in portable and installed climate control solutions for a wide range of industries and uses. Based on the work of more than 500 passionate climate control experts and more than three million installations, our competence centres around Europe design and build exceptional heaters, coolers, dehumidifiers and other products that form the backbone of these climate solutions. In everything they do, they remain focused on creating healthy and comfortable climate surroundings in a sustainable, energy-efficient and cost-effective way.

Five competence centres in Denmark, Germany, Italy, Spain and UK.

DDAA

NNIISSHH EENNGGIINNEEEERRIINN

GG

S K I V E

GGEERR

MM

AANN EENNGGIINNEEEERRIINNGG

N O R D E R S T E DT

IITTAA

LLIIAANN EENNGGIINNEEEERRIINN

GG

PA S T R E N G O

SSPPAANNIISSHH EENNGGIINNEEEERRIINN

GG

VA L E N CI A

BBRRII

TTIISSHH EENNGGIINNEEEERRIINN

GG

M A L D O N

2

Calorex

Calorex products are made at Dantherm Group's modern facility in Maldon in the UK. Also the group's pool and commercial competence centre, it is where heat pumps and dehumidifiers for swimming pools and commercial installations have been engineered since 1977. Renowned for their durability and efficiency, these environmentally friendly solutions are installed in private and public pools across most of Europe.

Competence centre for pool and commercial solutions: Maldon, UK.

3

4

CONTENT

Based on the extensive knowhow of our climate solution experts across the Group, we have developed an industry-leading range of products and solutions all characterised by reliability, sustainability, efficiency and ease of use.

Being able to source everything from just one supplier will help streamline your purchasing supply lines and reduce your costs for internal handling. To that end, you’ll also find our local presence with an extensive network of professional dealers across Europe helpful. It means support in your time zone and language – from people who understand your local market requirements.

Enjoy the read!

Our solutions rest on these four pillars:

Reliability has always been at the heart of everything we do. So we still use long-lasting, solid components that have been through extensive testing.

Sustainability is an integral part of how we work. We aim to create solutions that are at least as good for the environment as any comparable solution.

Efficiency is about delivering impres-sive performance while generating savings in the form of reduced energy costs.

Usability is key to any solution. Our experts do many usability tests to make sure ours are easy to install and hassle-free to operate.

4

5

P O O L C H I L L E R S

P 2 3POOL HEAT PUMPS

P 6

WATER HEATING & COOLING

P 5 7COMMERCIAL DEHUMIDIFIERS

P 4 3

POOL DEHUMIDIFIERS

P 2 7

A I R H A N D L I N G U N I T S

P 3 7

HEAT PUMPS

While all heat pumps offer sustainable, dynamic heating or cooling for your swimming pool, none offer the same energy savings and reduced running costs as our Calorex range.

Our heat pump systems provide total temperature control all year round, working at temperatures as low as -15°C for both indoor and outdoor pools. This versatility and reliability across our range ensures your water remains at the optimal warmth, whether you run a busy leisure park, a soothing spa, or are taking care of your own pool at home.

As well as effortless heating and cooling, Calorex heat pumps can save you up to 75% on both operating costs and carbon savings against electric heaters, offering a solution that is as economic as it is effective.

6

WHY CHOOSE OUR SWIMMING POOL PRODUCTS?

A sustainable way to dynamically heat your swimming pool saving both energy and operating costs.

POOL HEAT PUMP TECHNOLOGY

We can offer two proven technologies for environmental control – fresh air dehumidification with heat recovery and heat pump dehumidification with air to air and air to water heat recovery.

CHOOSING THE BEST SOLUTION

Our dehumidifiers and AHUs are designed to economically provide the environmental comfort and moisture related structural protection necessary for a pool.

HEALTHY SWIMMING ENVIRONMENTS

Our development teams focus on reducing the carbon foot print by making our products as environmentally friendly as possible.

PROTECTING THE ENVIRONMENT

We focus on developing energy saving units.

REDUCE OPERATING COSTS

Network of service agents and accredited technicians available from Dantherm Group Denmark, UK and Italy and through local distributors.

TECHNICAL SUPPORT AND AFTER-SALES CARE

We have products that heat or cool the pool depending on the outside temperature to create the perfect swimming environment.

CREATING THE RIGHT POOL TEMPERATURE

Not only do we have pool environmental control units but we can provide ventilation for all other areas of your leisure facility including gyms, changing rooms and foyers.

WHOLE BUILDING SOLUTIONS

7

8

HEATING AND COOLING SOLUTIONS FOR:PRIVATE AND DOMESTIC SWIMMING POOLS

QUICK GUIDE

POOL TYPE

OPERATION

APPLICATIONS

C-PAC+HEAT PUMP

I-PACHEAT PUMP

I-PAC+ HEAT PUMP

V-PACHEAT PUMP

PRO-PAC 22 BCCHILLER

OUTDOOR

INDOOR

ABOVE GROUND

HEATING

COOLING

PRIVATE POOLS

SPAS, THERAPY & WELLNESS

PLUNGE POOLS

HOTELS, HEALTH CLUBS & SPORT ACADEMIES

PRO-PAC 22HEAT COOL*

9

HEATING AND COOLING SOLUTIONS FOR:PUBLIC AND COMMERCIAL SWIMMING POOLS

QUICK GUIDEPRO-PAC 30-140

HEAT PUMPPRO-PAC 30-140

CHILLER

POOL TYPE

OPERATION

APPLICATIONS

PRO-PAC 30-140HEAT COOL*

OUTDOOR

INDOOR

HEATING

COOLING

WATER PARKS

PLUNGE POOLS

HOLIDAY PARKS & CAMPSITES

* Designed specifically for the Gulf climate

HOTELS, HEALTH CLUBS & SPORT ACADEMIES

ALL YEAR HEATING

SMALL AIR SOURCE HEAT PUMPS

C-PAC+ 6-8-12-15-20

� Quiet, aesthetically pleasing design

� Eco-friendly refrigerant R32 = 675 GWP, (Global Warming Potential)

� ABS cabinet

� Rotary compressor

� Titanium heat exchanger

� Reverse cycle defrost – operation to -10°C air temperature

� Can heat water to 40°C

� Multifunction operation – can be set to heating, cooling and heat/cool

� ‘Smart’ pool pump control

� Water flow switch

Winter protection coverCPT 6ALY, CPT 8ALY - 1005528CPT 12ALY, CPT 15ALY - 1005529CPT 20BLY - 1005789

Optional accessories

Included in the box

Rubber feet (kit of 4) 1005526

Drainage kit 1005558

Water union connectors 2 x 11/2 2 x 50mm 1005629

C-PAC+ heat pumps are an environmentally friendly and efficient way to heat your swimming pool. The low energy consumption coupled with high heat production makes for lower pool running costs. Unlike alternative ways of heating your pool, the C-PAC+ requires no fuel storage tank or high capacity electrical supply and produces no smells, fumes or CO2 gases.

10

Dimensions

Model A B C D E F G H J

CPT 6ALY 381 620 363 405 968 370 96 654 741

CPT 8ALY 381 620 363 405 968 370 96 654 741

CPT 12ALY 466 750 443 490 1130 395 87 709 933

CPT 15ALY 466 750 443 490 1130 395 87 709 933

CPT 20ALY 496 870 470 520 1299 475 65 809 1077

E

WaterOutlet

Condenser drain down(for winterisation)

F H

Pressure gauge

J

G

Air inlet

Air inlet

DAB

C

WaterInlet

Specifications Units CPT 6ALY CPT 8ALY CPT 12ALY CPT 15ALY CPT 20BLY

Air temperature range

Water temperature range

Heating capacity

Input power

COP

Heating capacity

Input power

COP

Heating capacity

Input power

COP

Power supply

Max. current

Refrigerant

Air flow

Sound level @ 3m

Sound level @ 10m

Product size (w x d x h)

Weight

°C

°C

kW

kW

-

kW

kW

-

kW

kW

-

V/Hz

A

m3/h

dB(A)

dB(A)

mm

kg

-10-43

8-40

7.5

1.2

6.3

5.8

1.2

4.6

4.7

1.1

4.2

230/1ph/50

10.0

R32

2100

37

28

933 x 401 x 657

50

-10-43

8-40

8.9

1.4

6.4

6.9

1.4

4.8

5.1

1.3

3.9

230/1ph/50

15.3

R32

2100

38

29

933 x 401 x 657

59

-10-43

8-40

13.5

2.0

6.6

10.8

2.1

5.2

8.2

1.9

4.3

230/1ph/50

18.3

R32

3500

39

30

1130 x 490 x 709

71

-10-43

8-40

16.9

2.7

6.3

14.1

2.7

5.1

10.6

2.7

3.9

230/1ph/50

25.3

R32

3500

39

30

1133 x 490 x 709

93

-10-43

8-40

23.1

4.6

5.0

20.0

4.9

4.1

14.1

3.9

3.6

400/3ph/50

11.1

R410a

5000

41

32

1299 x 520 x 809

117

Performance – air 24°C 80% RH, Water 26°C




C-PAC+ 6-8-12-15-20

11

� Average COP 9.7 = 2 x more efficient than on/off heat pumps


� Inverter heat pump

� Power ratings from 9.5 to 25kW

� 9-11 dB(A) sound reduction compared to an equivalent on/off heat pump, with ‘Whisper Mode’

� Operates in air temperatures of -5°C to +43°C

� Integrated controller with a touchscreen user interface

� Function settings for heating, cooling or heat/cool

� Soft start-up

� Aluminium alloy

� Built-in Wi-Fi module

SMALL INVERTER HEAT PUMPS

I-PAC 8-12-16-22

Eco-friendly refrigerant

The PoolTherm App for our Calorex I-PAC inverter heat pumps is available on Android and iOS. Simply search for 'PoolTherm' in App Store or Google Play and download it today!

Remote LED control kit 1005544

Winter protection coverIPT 8ALX, IPT 12ALX - 1005527IPT 16ALX - 1005528IPT 22ALX - 1005529


Included in the box

Desired pool temperature

Inverterheat pump

Traditional on/o� heat pump

Tem

pera

ture

Boost mode for pool start up

Whisper mode for day to day

Temperature control chart

Inverter technology allows for efficient control of the pool temperature, and the I-PAC only uses what energy is needed when it is required. High efficiency with modulating step-less inverter compressor giving an average COP of 9.7.




12

Dimensions

Gas boiler Oil boiler On/o�heat pump

Inverterheat pump

Electricity

100

200

300

400

500

600

700

800

900

1000

1100

1200

Free energyPaid for energy

Great value, and environmentally conscious heating option, with energy consumption half that of a traditional on/off heat pump, and 1/10 of that for gas or electric pool heating.

Heating method efficiency chart

Volcano eruption shockwaves190

Rocket launch from 300ft away170

Breathing10

0

Rustlng leaves20

Whisper30

Computer40

Refrigerator50

Conversational speech60

Dishwasher70

Vacuum cleaner80

Kitchen blender90

Handheld drill100

Motorcycle revving110

Airplane taking o�140Threshold of pain

Extremely loud

Very loud

Loud

Moderate to quiet

Faint

DECIBEL SCALE (dB)

CALOREX INVERTER HEAT PUMPS

Where our heat pump sits on the decibel scale


I-PAC 8-12-16-22


IPT 8ALX 334 560 318 359 864 250 74 648 116

IPT 12ALX 334 560 318 359 864 290 74 648 116

IPT 16ALX 334 590 318 359 954 390 74 748 116

IPT 22ALX 404 720 388 429 1084 640 74 948 107

E

B

C

DA

H

GF

J

Air inlet

Air inlet

Waterout

Waterin

13

Specifications Units IPT 8ALX IPT 12ALX IPT 16ALX IPT 22ALX

Air temperature range °C -5-43 -5-43 -5-43 -5-43

Water temperature range °C 12-40 12-40 12-40 12-40

Performance – air 27°C 80% RH, water 27°C

Heating capacity kW 9.5 13.0 20.0 25.0

COP range 13.2-5.4 13.5-5.6 13.5-5.7 13.8-5.8

Average COP at 50% speed 8.9 9.7 9.3 9.6






Cooling capacity kW 3.9 5.2 7.4 9.4

Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50 230/1ph/50

Rated input power kW 0.3-1.79 0.40-2.38 0.57-3.21 0.69-4.25

Maximum input current A 9.5 12.5 19.5 20.0

Water flow m3/h 3.0-5.0 4.0-6.0 7.0-10.0 10.0-12.0

Water connection mm2 1½" or 50mm 1½" or 50mm 1½" or 50mm 1½" or 50mm

Compressor Inverter Inverter Inverter Inverter

Condenser Titanium Titanium Titanium Titanium

R32 gas weight g 600 900 1100 2000

Sound level @ 10m dB(A) 19.6-31.5 21.9-32.0 24.3-36.1 24.9-36.7

Product size (w x d x h) mm 864 x 359 x 648 864 x 359 x 648 954 x 359 x748 1084 x 429 x 948

Weight kg 47 49 68 90


I-PAC 8-12-16-22

14


I-PAC+ 12-16-22-28

� COP >10 = 2 x more efficient than on/off heat pumps



� Power ratings from 15 to 36kW

� 9-11 dB(A) sound reduction compared to an equivalent on/off heat pump, with ‘Whisper Mode’.




� Soft start-up

� Aluminium alloy

� Built-in Wi-Fi module

Remote LED control kit 1005544

Winter protection coverIPT 12ALY, IPT 16ALY, IPT 16BLY - 1005528IPT 22ALY, IPT 22BLY - 1005529IPT 28BLY - 1005789


Included in the box


The PoolTherm App for our Calorex I-PAC inverter heat pumps is available on Android and iOS. Simply search for 'PoolTherm' in App Store or Google Play and download it today!

Benefits

� All year heating for outdoor and indoor pools

� Can operate down to -10°C ambient air temperature

� High heating performance at lower temperatures – ideal for quick pool heat up at the start of the season

� Pool heating at altitude

� Higher cooling capacity

� Most efficient models – highest COP




15


IPT 12ALY 334 590 318 359 954 340 74 648 107IPT 16ALY 404 590 388 429 954 460 74 755 107

IPT 16BLY 404 590 388 429 954 460 74 755 107

IPT 22ALY 404 720 388 429 1084 620 74 948 107

IPT 22BLY 404 720 388 429 1084 620 74 948 107

IPT 28BLY 514 790 498 539 1154 650 74 948 128

E

B

C

DA

H

GF

J

Air inlet

Air inlet

Waterout

Waterin

Dimensions

Gas boiler Oil boiler On/o�heat pump

Inverterheat pump

Electricity

100

200

300

400

500

600

700

800

900

1000

1100

1200

Free energyPaid for energy

Great value, and environmentally conscious heating option, with energy consumption half that of a traditional on/off heat pump, and 1/10 of that for gas or electric pool heating.

Heating method efficiency chart

Desired pool temperature

Inverterheat pump

Traditional on/o� heat pump

Tem

pera

ture

Boost mode for pool start up

Whisper mode for day to day

Temperature control chart

Volcano eruption shockwaves190

Rocket launch from 300ft away170

Breathing10

0

Rustlng leaves20

Whisper30

Computer40

Refrigerator50

Conversational speech60

Dishwasher70

Vacuum cleaner80

Kitchen blender90

Handheld drill100

Motorcycle revving110

Airplane taking o�140Threshold of pain

Extremely loud

Very loud

Loud

Moderate to quiet

Faint

DECIBEL SCALE (dB)

CALOREX INVERTER HEAT PUMPS

Where our heat pump sits on the decibel scale


I-PAC+ 12-16-22-28

16

Specifications Units IPT 12ALY IPT 16ALY IPT 16BLY IPT 22ALY IPT 22BLY IPT 28BLY

Air temperature range °C -10-43 -10-43 -10-43 -10-43 -10-43 -10-43

Water temperature range °C 12-40 12-40 12-40 12-40 12-40 12-40


Heating capacity kW 15.0 21.0 21.0 27.5 27.5 36.0

COP range 15.0-6.6 14.8-6.4 14.8-6.4 15.0-6.8 15.0-6.5 14.8-6.0

Average COP at 50% speed 10.6 10.3 10.3 10.3 10.3 10.2





Performance – air -10°C 70% RH, water 23°C



Cooling capacity kW 6.7 9.5 9.5 11.9 11.9 16.0

Power supply V/Hz 230/1ph/50 230/1ph/50 400/3ph/50 230/1ph/50 400/3ph/50 400/3ph/50

Rated input power kW 0.27-2.28 0.41-3.15 0.41-3.15 0.48-3.91 0.48-3.91 0.64-5.20

Maximum input current A 13.5 17.0 5.8 20 7.0 9.5

Water flow m3/h 5.0-7.0 8.0-10.0 8.0-10.0 10.0-12.0 10.0-12.0 12.0-18.0

Water connection mm2 1½" or 50mm 1½" or 50mm 1½" or 50mm 1½" or 50mm 1½" or 50mm 1½" or 50mm

Compressor Inverter Inverter Inverter Inverter Inverter Inverter

Condenser Titanium Titanium Titanium Titanium Titanium Titanium

R32 gas weight g 900 1200 1200 2000 2000 2700

Sound level @ 10m dB(A) 20.8-24.5 20.4-33.7 20.4-33.7 23.0-34.4 23.0-34.4 22.1-34.2

Product size (w x d x h) mm 954 x 359 x 648 954 x 429 x 755 954 x 429 x 755 1084 x 429 x 948 1084 x 429 x 948 1154 x 539 x 948

Weight kg 52 68 68 90 93 120


I-PAC+ 12-16-22-28

17


V-PAC 12-16-22


� Average COP 10.7 = 2 x more efficient than on/off heat pumps



� Power ratings from 14 to 24kW

� 9-11 dB(A) sound reduction than on/off heat pump, with ‘Whisper Mode’.

� Ideal for confined spaces




� Soft start-up

� ABS alloy

Winter protection coverVPT 12ALX, VPT 16ALX, VPT 22ALX - 1007622


Included in the box

Inverter technology allows for efficient control of the pool temperature, and the V-PAC only uses what energy is needed when it is required. High efficiency with modulating step-less inverter compressor giving an average COP of 10.7.




18

Specifications Units VPT 12ALX VPT 16ALX VPT 22ALX

Air temperature range °C -5-43 -5-43 -5-43

Water temperature range °C 8-40 8-40 8-40


Heating capacity kW 14.11 18.5 24.4

COP range 18.5-6.28 18.5-6.03 13.5-5.14

Average COP at 50% speed 10.7 10.8 8.8



COP range 8.5-5.11 8.4-5.02 6.2-4.14

Average COP at 50% speed 6.5 6.4 4.7




Cooling capacity kW 6.23 6.7 10.3

Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50

Rated input power kW 0.20-2.24 0.23-3.06 0.75-4.75

Maximum input current A 12.5 15.5 24.5

Water flow m3/h 4.97 6.5 8.98

Water connection mm2 1½" or 50mm 1½" or 50mm 1½" or 50mm

Compressor Inverter Inverter Inverter

Condenser Titanium Titanium Titanium

R32 gas weight g 800 800 1700

Sound level @ 10m dB(A) <29 <30 <30

Product size (w x d x h) mm 650 x 650 x 835 650 x 650 x 835 745 x 752 x 967

Weight kg 70 80 95

F

I

B C

A

E D

H

G

Display

Water inWater out Drain

K

J

L

MN

Dimensions Model A B C D E F G

VPT 6ALX 650 98 362 650 626 220 835

VPT 8ALX 650 98 362 650 626 220 835

VPT 12ALX 752 138 387 745 721 240 967


V-PAC 12-16-22

Model H I J K L M N

VPT 6ALX 600 92 490 190 430 588 130

VPT 8ALX 600 92 490 190 430 588 130

VPT 12ALX 695 92 530 228 505 705 157

19


PRO-PAC HEAT COOL 22

Options

� Chiller only

� Soft start

� High pressure fan

� Condensate insulation kit for plant room installations

P R O - PAC 22 B H C

� Purpose-built for operation in the Gulf region

� Zero ozone depleting R134a refrigerant – ensures reliable, efficient operation regardless of air temperature

� Titanium or CuNi heat exchanger

� Fully automatic operation

� Scroll compressors

� Water flow switch on all models

� Comprehensive circuit protection

� Quiet, efficient owlet axial fans

� Weather-proof construction

� Digital thermostat – choice of in-built positions

Specifications Units PPT 22BHC

Air temperature rangeWater temperature range

Heating output @ +20°C/85% RH ambientHeating input @ +20°C/85% RH ambient

Cooling output @ +45°C/50% RH ambientCooling input @ +45°C/50% RH ambient

°C°C

kWkW

kWkW

10-5510-38

15.02.7

12.44.1

Power supplyMin. supply capacityRecommended supply fuseMax. starting current standard (LRA)Max. starting current soft start (LRA)

V/HzAAAA

400/3ph/5013204825

Nominal air flowFan external resistance (standard)

m3/hPa

5,0000

Water flow ±10% (CuNi/Titanium heat exchanger)Pressure drop (water)Water connectionsCondensate water connectionsCompressorFanSound level @ 3m

l/minm hdinch

" BSPMTypeTypedB(A)

n/a/123n/a/0.2

1½ F/PVC½ ABS

1 x Scroll1 x Axial

52Product size (w x d x h)Weight

mmkg

1264 x 600 x 725145

Output and input calculated at water temperature 26°C for heating, and 32° for cooling

Specifically designed for the Gulf climate all components used in their construction are built to give maximum efficiency and reliability at swimming pool conditions, even in the toughest climates.

20

Options

� Chiller only

� CuNi heat exchanger

� Soft start



LARGE AIR SOURCE HEAT PUMPS

PRO-PAC HEAT COOL 30-45-70-90-140

P R O - PAC 30 B H C

Specifications Units PPT 30BHC PPT 45BHC PPT 70BHC PPT 90BHC PPT 140BHC


Heating output @ +20°C/85% RH ambientHeating input @ +20°C/85% RH ambient

Cooling output @ +45°C/50% RH ambientCooling input @ +45°C/50% RH ambient

°C°C

kWkW

kWkW

10-5510-40

31.05.5

25.58.3

10-5510-40

36.46.7

30.010.0

10-5510-40

61.910.5

51.016.2

10-5510-40

72.713.3

59.920.0

10-5510-40

123.821.0

102.132.4


V/HzAAAA

400/3ph/5021309633

400/3ph/502540

10234

400/3ph/5042609633

400/3ph/505070

10234

400/3ph/5084

1259633


m3/hPa

5,5000

11,0000

14,0000

22,0000

28,0000

Water flow ±10% (CuNi/Titanium heat exchanger)

Pressure drop (water)Water connectionsCondensate water connectionsCompressorFanSound level @ 3m

l/minm hdinch inchTypeTypedB(A)

n/a/250n/a/0.7

n/a/2 union1½ BSPM1 x Scroll1 x Axial

64

66/3004.5/0.4

1½ BSPM/2 union1½ BSPM1 x Scroll1 x Axial

65

133/5003.4/1.5

1½/3 BSPM1½ BSPM2 x Scroll1 x Axial

70

166/6004.5/1.7

1½/3 BSPM1½ BSPM2 x Scroll2 x Axial

65

266/1,0005.3/2.1

2/4 BSPM1½ BSPM4 x Scroll2 x Axial

70Width DepthHeightWeight

mmmmmmkg

1585780

1080219

170510571311329

184611981312549

211711951334599

2221166314051065

Output and input calculated at water temperature 26°C for heating, and 32° for cooling

� Purpose-built for operation in the Gulf region.

� Zero ozone depleting R134a refrigerant – ensures reliable, efficient operation regardless of air temperature


� Fully automatic operation

� Scroll compressors

� Water flow switch on all models

� Comprehensive circuit protection


� Weather-proof construction

� Digital thermostat

Specifically designed for the Gulf climate. All components used in their construction are built to give maximum efficiency and reliability at swimming pool conditions, even in the toughest climates.

21

P R O - PAC 30 B M Y

Options


� Soft start


Output and input calculated @ 26°C water temperature

Specifications Units PPT 30BMY PPT 45BMY PPT 70BMY PPT 90BMY PPT 140BMY


Output @ +25°C/55% RH ambientInput @ +25°C/55% RH ambient

Output @ +15°C/70% RH ambientInput @ +15°C/70% RH ambient

Output @ -3°C/100% RH ambient*Input @ -3°C/100% RH ambient*

Power supplyMinimum supply capacityRecommended supply fuseNominal air flowWater flowPressure dropWater connectionsCompressorCondenserSound level @ 10mSound level @ 3mProduct size (w x d x h)Weight - Y models

°C°C

kWkW

kWkW

kWkW

V/HzAA

m3/hl/minm hdinchTypeTypedB(A)dB(A)mmkg

-15-4010-38

36.36.7

29.66.2

17.45.4

400/3ph/502030

5,5002500.7

2 Union1 x Scroll Titanium

5464

1585 x 780 x 1080233

-15-4010-38

45.28.6

36.98.0

21.76.9

400/3ph/502230

12,0003000.4

2 Union1 x Scroll Titanium

5565

1705 x 1057 x 1311337

-15-4010-38

68.312.3

55.711.4

32.79.8

400/3ph/503550

14,0005001.5

3 BSPM1 x Scroll Titanium

5970

1846 x 1198 x 1312435

-15-4010-38

96.318.1

78.516.8

46.114.5

400/3ph/504360

24,0006001.4

3 BSPM2 x Scroll Titanium

5565

2117 x 1195 x 1334661

-15-4010-38

136.624.7

111.322.8

65.419.6

400/3ph/5067

10028,0001,000

2.14 BSPM

2 x ScrollTitanium

5970

2221 x 1633 x 1405880

LARGE AIR SOURCE HEAT PUMPS

PRO-PAC 30-45-70-90-140BMY

� Capacities from 32kW to 125kW

� Purpose designed components for pool heating

� Can be installed outside or in a plant room

� High efficiency spiral wound full flow titanium condenser

� Leading brand scroll compressors


� Plastisol coated cabinet

� Water flow switch

� Condensate collector

� Pro-Pac Y models are fitted with reverse cycle defrost and will operate in air temperatures as low as -15°C, therefore they are suitable for all season use and indoor swimming pools

Pro-Pac commercial heat pumps are specifically designed to economically provide heating to high activity and larger pools such as those in camp sites, leisure parks, hotels etc. Heat pumps are recognised as the most sustainable way to dynamically heat swimming pool water and with a Calorex heat pump you will save both energy and operating costs. Pro-Pac heat pumps are available for seasonal use during typical outdoor pool usage periods or for indoor pool, all year round enjoyment.

22

CHILLERS

Calorex water chillers are ideal for cooling water in a range of commercial pool applications. They are especially effective for ice cold plunge pools and cold-water immersion therapy which is rapidly becoming a popular method of supporting the physical health of athletes and accelerating their recovery from injuries.

Our commercial swimming pool coolers are used throughout well-known sporting clubs and will also be in use in pools at the 2022 World Cup in Qatar.

23

P R O - PAC 22 B C

SMALL CHILLERS

PRO-PAC 22BC

Specifications Units PPT 22BC


Output @ 32°C waterInput @ 32°C water


°C°C

kWkW

kWkW

10-5510-38

12.44.1

7.53.3


V/HzAAAA

400/3ph/5013204825


m3/hPa

5,0000

Water flow ±10%Pressure drop (water)Water connections

l/minm hdinch

1234.2

1½ BSPFCompressorFanSound pressure level @ 3mProduct size (w x d x h)Weight

TypeTypedB(A)mmkg

1 x Scroll1 x Axial

521264 x 600 x 725

145

Cooling output and input calculated at +45°C/50% RH ambient air

� Mono-block design with choice of in-built thermostat positions

� Fully packaged, robust and weatherproof construction

� Quiet operation


� Non ozone depleting refrigerant (R134a)

Pro-Pac water chillers are ideal for outside installation, to efficiently cool your swimming pool. They can be used for plunge pools in spas, water immersion pools for sports recovery as well as equine swimming pools.

24

P R O - PAC 140 B C

LARGE CHILLERS

PRO-PAC 30-45-70-90-140BC

Specifications Units PPT 30BC PPT 45BC PPT 70BC PPT 90BC PPT 140BC




°C°C

kWkW

kWkW

10-5510-38

25.58.3

15.56.6

10-5510-38

30.0 10.0

18.28.0

10-5510-38

51.0 16.2

30.912.8

10-5510-38

59.920.0

36.316.0

10-5510-38

102.132.4

61.925.5


V/HzAAAA

400/3ph/5021309633

400/3ph/502540

10234

400/3ph/5042609633

400/3ph/505070

10234

400/3ph/5084

1259633


m3/hPa

5,5000

11,0000

14,0000

22,0000

28,0000

Water flow ±10%Pressure drop (water)Water connections

l/minm hdinch

2502.1

1½ BSPM

3004.5

1½ BSPM

5003.4

1½ BSPM

6004.5

1½ BSPM

1,0005.3

2 BSPMCompressorFanSound pressure level @ 3mProduct size (w x d x h)Weight

TypeTypedB(A)mmkg

1 x Scroll1 x Axial

621585 x 780 x 1080

219

1 x Scroll1 x Axial

641705 x 1057 x 1311

329

2 x Scroll1 x Axial

681846 x 1198 x 1312

549

2 x Scroll2 x Axial

702117 x 1195 x 1334

599

4 x Scroll2 x Axial

712221 x 1663 x 1405

1065



� Quiet operation

� Purpose-built for operation in the Gulf region



Pro-Pac water chillers are ideal for outside installation, to efficiently cool your swimming pool. They can be used for plunge pools in spas, water immersion pools for sports recovery as well as equine swimming pools.

Options


� Soft start



25

Calorex chiller

Circulating pump

Plunge pool

Insulated shellIsolating valves

Water circulating pumpPlate heat exchanger

Mains �ll

Water circulating pump

Isolating valves

Expansion tank 10l/kW

Note: For the above illustration, the primary (heat pump) circuit must be charged with a glycol solution. This would be around 25-30% (UK) or up to 40-50% for cooler countries.

For water temperatures higher than 10°C the Calorex heat pump can be installed as a direct system, ie the cross plate heat exchanger is not required.

CALOREX HEAT PUMPS

INSTALLATION EXAMPLES

HEATER CHILLER SYSTEM – INSTALLATION TO COLD PLUNGE POOL

INDIRECT CHILLER SYSTEM – INSTALLATION TO COLD PLUNGE POOL

For correct sizing of the chiller and/or plate heat exchanger for all applications please contact our dedicated sales team who can assist in tailoring the selection for your project.

Plunge pool

26

DEHUMIDIFIERS

When moisture is left unchallenged, this can present a major problem for an indoor pool.

Not only does it create an uncomfortable atmosphere for swimmers and bathers, but the growth of mould is encouraged and structural damage can leave your pool area looking less than luxurious. Our pool dehumidifiers physically remove moisture from the air to ensure the environment stays controlled and your home pool projects are protected.

27

28

DEHUMIDIFICATION SOLUTIONS FOR:PRIVATE AND COMMERCIAL SWIMMING POOLS

QUICK GUIDE

POOL TYPE

INSTALLATION

APPLICATIONS

INDOOR

THROUGH-THE-WALL

FLOOR-STANDING

SPA & THERAPY

HOTELS, SCHOOLS & HEALTH CLUBS

HOLIDAY PARKS & CAMPSITES

DH 33-55 DH 75-110AX AA 300-500 VARIHEAT SYSTEMS

WALL-MOUNTED

DUCTED

PRIVATE POOLS

WALL-MOUNTED SWIMMING POOL DEHUMIDIFIERS

DH 33-55

D H 33 - 55

Options

� Through-the-wall version

� LPHW air heater

� Air filter

� Floor stand kit

4.03.63.22.82.21.61.20.80.40.0

Litr

es/h

r

5˚C 10˚C 15˚C 20˚C 25˚C 30˚C 35˚C

Defrost Zone

2.01.81.61.41.21.00.80.60.40.20.0

Litr

es/h

r

5˚C 10˚C 15˚C 20˚C 25˚C 30˚C 35˚C

40%RH 50%RH 60%RH 70%RH 80%RH

Defrost Zone

40%RH 50%RH 60%RH 70%RH 80%RH

Performance data

DH 33

4.03.63.22.82.21.61.20.80.40.0

Litr

es/h

r

5˚C 10˚C 15˚C 20˚C 25˚C 30˚C 35˚C

Defrost Zone

2.01.81.61.41.21.00.80.60.40.20.0

Litr

es/h

r

5˚C 10˚C 15˚C 20˚C 25˚C 30˚C 35˚C

40%RH 50%RH 60%RH 70%RH 80%RH

Defrost Zone

40%RH 50%RH 60%RH 70%RH 80%RH

DH 55

Calorex dehumidifiers maintain a comfortable humidity, minimise condensation and keep heating costs at the lowest possible level.

� High moisture extraction for low power consumption

� Zero ozone depleting refrigerant

� Low internal operating pressures = long useful life

� Fan cycle or continuous mode

� Air outlet adjustable to horizontal or vertical

� Hot gas defrost (allows operation to 5°C air temperature)

� Many options for flexible installation

� Remote humidistat and on/off functionThe DH 33-55 range are high performance, low cost wall-mounted dehumidifiers with an integrated air heating option available. Specially designed for small swimming pools or spas, they maintain a comfortable humidity, minimise condensation and keep heating costs to a minimum.

29

Specifications Units DH 33 DH 55

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)Heater typeHeat output @ 80°C flowFlow rateProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm

5-351.251.9440

048

R407c230/1ph/50

0.754.41015

Optional LPHW35

780 x 255 x 6533716

5-352.53.5740

048

R407c230/1ph/50

1.27.51330

Optional LPHW55

1245 x 255 x 6535816

WALL-MOUNTED SWIMMING POOL DEHUMIDIFIERS

DH 33-55

Wall-mounted air flow

INSTALLATION OPTIONS

Wall-mounted with air heating

Through-the-wall Through-the-wall with air heating

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air

Condensate Water to Waste

Warm Dry Air

Dehumidi�er

Boiler

Warm Wet AirCondensateWater to Waste

Warm Dry Air

Ground Level

Ground Level Pool WaterApprox 26˚C

Warm Wet Air

Hall Air Temperature Approx 28˚C


Warm Dry Air

Dehumidi�er

Warm Dry Air


Warm Wet AirDehumidi�er

Ground LevelPool WaterApprox 26˚C

Pool WaterApprox 26˚C



Warm Wet Air


CondensateWater to Waste

Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

30

FLOOR-STANDING SWIMMING POOL DEHUMIDIFIERS

DH 75-110AX

7

6

5

4

3

2

1

0

Litre

s/hr

5 C̊ 10 C̊ 15 C̊ 20 C̊ 25 C̊ 30 C̊ 35 C̊ 40 C̊

40%RH 50%RH 60%RH 70%RH 80%RH

40%RH 50%RH 60%RH 70%RH 80%RH

Defrost Zone

7

6

5

4

3

2

1

0

Litre

s/hr

5˚C 10˚C 15˚C 20˚C 25˚C 30˚C 35˚C 40˚C

Defrost Zone

Performance data

DH 75

DH 110

7

6

5

4

3

2

1

0

Litre

s/hr

5 C̊ 10 C̊ 15 C̊ 20 C̊ 25 C̊ 30 C̊ 35 C̊ 40 C̊

40%RH 50%RH 60%RH 70%RH 80%RH

40%RH 50%RH 60%RH 70%RH 80%RH

Defrost Zone

7

6

5

4

3

2

1

0

Litre

s/hr

5˚C 10˚C 15˚C 20˚C 25˚C 30˚C 35˚C 40˚C

Defrost Zone

D H 110

Options


� LPHW air heater complete with 3 way valve and 12V thermostat interlock

� 400V-3ph option for DH 110

� High moisture extraction for low power consumption

� Corrosion free, easy to clean aluminium air grille with easy clean air filter

� Zero ozone depleting refrigerant

� Low internal operating pressures = long useful life

� Adjustable air outlet

� Quiet centrifugal fans, two speeds

� Hot gas defrost (allows operation to 5°C air temperature)

� Remote humidistat and on/off function

DH 75-110AX are floor-standing high performance and high capacity dehumidifiers. With high moisture extraction for low energy use, as well as being corrosion free and easy to clean, they are ideal for keeping your swimming pool environment healthy the humidity under control. Options are also available for additional air heating, and through-the-wall installation that can be situated adjacent to the pool hall.

Each Calorex unit includes an adjustable humidistat controlling relative humidity (RH) in the ideal range of 55% – 65%. With RH under control, condensation can be minimised by selecting the most appropriate installation from the schematics shown on the next page. Note: vulnerable areas such as windows, roof lights or other cold bridges may form condensation at low external air temperatures unless dry air is blown directly onto them.

31

FLOOR-STANDING SWIMMING POOL DEHUMIDIFIERS

DH 75-110AX

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

Specifications Units DH 75AX DH 110AX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)Heater typeHeat output @ 80°C flowFlow rateProduct size (w x d x h)WeightCondensate drain size (brass compression)

°Cl/hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm

5-353.64.0

11800

53R407c

230/1ph/501.59.51355

Optional LPHW8.99.6

1520 x 385 x 79614315

5-354.55.2

11800

53R407c

230/1ph/502.1122066

Optional LPHW8.99.6

1520 x 385 x 79614415

Floor-standing air flow


Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

Floor-standing with air heating

Through-the-wall Through-the-wall with air heating

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

Warm Dry Air

Warm Wet Air

Ground LevelBoiler

BoilerGround Level

Warm Wet Air


Warm Dry Air

Dehumidi�er

Boiler


Warm Dry Air

Ground Level


Warm Wet Air



Warm Dry Air

Dehumidi�er

Warm Dry Air







Warm Wet Air



Warm Dry Air

Dehumidi�er

Dehumidi�er

Dehumidi�er

32

A A 300 - 500

Specifications Units AA 300 AA 500

Air flowExternal available static pressureDehumidification @ 30°C/60% RH

m³/hPal/h

1300 ± 10% 2503.6

1800 ± 10% 2504.5

Heat to airVia heat pump kW 4.4 6.1Via LPHW (LPHW Air models) kW 7.3 7.5Total (heat pump + LPHW) kW 9.8 11.7Heat to waterVia LPHW (LPHW Air + Water models) kW 9.5 9.5Product size (h x w x d) mm 850 x 1027 x 730 850 x 1027 x 730Weight kg 111 111

Options

� Flexible flange kit to reduce vibration

DUCTED SWIMMING POOL DEHUMIDIFIERS

AA 300-500

These systems have been specifically designed for domestic pools where a ducted dehumidification system is preferred. Additional air and water heating via LPHW heat exchangers will give you total control over your pool environment and the compact dimensions ensure maximum installation flexibility.

All models:

� Pool hall dehumidification

� Dynamic heat pump heat recovery

� Constant flow fan with two speed settings

� Remote control panel (12V) with 1.8m lead (10m cable optional)

LPHW Air models add:

� Integral LPHW heat exchanger for air heating

LPHW Air+Water models add:

� Integral LPHW heat exchangers for pool and air

The AA 300 and AA 500 are premium air handling units incorporating heat pump dehumidification technology. With efficient heat recovery, these systems have been specifically designed for domestic pools where a ducted dehumidification system is preferred. Additional air and water heating via LPHW heat exchangers give you full control over your pool environment and the compact dimensions ensure maximum installation flexibility.

Flange kit

33

AW 1200

Options

� Fresh air module

� Upgraded LPHW heat exchanger for air

� Electric resistance air heaters (6/12/18kW)

� Air cooling with remote condenser

� Titanium pool condenser (AW models only)

Electrical heater option notes

� In lieu of LPHW heat exchangers

� 6kW or 12kW is available for 600 and 900 models



VARIHEAT AA/AW 600-900-1200-1500

The Variheat range are sophisticated air handling units incorporating heat pump dehumidification technology. With dynamic heat recovery using a heat pump, the Variheat is the essential choice for a domestic or light commercial indoor swimming pool.

� Pool hall dehumidification

� Dynamic heat pump heat recovery to pool and air

� Constant flow EC fan (models 600, 900, 1200)

� Speed controllable EC fan (model 1500)

� PLC control with 3.5" touchscreen user interface

� Remote monitoring/control

AA+LPHW models add:


AW models add:



The Variheat range are sophisticated air handling units incorporating heat pump dehumidification technology. With dynamic heat recovery using a heat pump, the Variheat is the essential choice for a domestic or light commercial indoor swimming pool. Over 3000 configurations offer the ultimate flexibility for tight plant room spaces. This range is purpose designed for swimming pool environmental control, providing the necessary comfort, moisture related structural protection and economical operation.

Variheat touchscreen controls

34

Top outlet

Basement outlet Remote condensing unit option

Bottom outlet

Horizontal outlet Top outlet Bottom outlet


VARIHEAT AA/AW 600-900-1200-1500


35

Specifications Units AW 600 AA 600 AW 900 AA 900 AW 1200 AA 1200 AW 1500 AA 1500

Air flowExternal available static pressureFresh air flow (option)External available static pressureDehumidification @ 30oC/60% RHDehumidification @ 30oC/70% RH

m3/hPa

m3/hPal/hl/h

2,000330

0-9001004.65.5

2,000330

0-9001004.65.5

2,500220

0-9001006.57.8

2,500220

0-9001006.57.8

3,500290

0-9001008.5

10.8

3,500290

0-9001008.5

10.8

4,300350

0-90010010.513.2

4,300350

0-90010010.113.2

Heat to airNet via heat pump (Mode B)Via standard LPHW @ 80oCMax. available (Mode B + standard LPHW)Via upgraded LPHW @ 55oCMax. available (Mode B + upgraded LPHW)

kWkWkWkWkW

5.111.014.09.4

12.7

5.111.014.09.4

12.7

7.113.518.611.516.9

7.113.518.611.516.9

10.024.030.020.427.0

10.024.030.020.427.0

14.028.036.023.836.8

14.028.036.023.836.8

Heat to waterNet via heat pump (Mode A)Via LPHW @ 80oCMax. available (Mode A + LPHW)

kWkWkW

5.518.023.5

000

7.430.037.4

000

10.030.040.0

000

12.540.052.5

000

Nominal power consumed kW 2.1 2.1 2.8 2.8 3.6 3.6 4.7 4.7

AW denotes heat recovery to air/water and LPHW heaters for air/water AA denotes heat recovery to air and optional LPHW heater for air only

Variheat 600/900 fig 1 fig 2 fig 3 fig 4H 1574 1574 977 1028L 842 1180 1574 1929D 839 839 700 700

fig 1 fig 2 fig 3 fig 4H 1778 1778 1110 1130L 942 1295 1778 2133D 955 955 800 800

Variheat 1200/1500

fig 1 fig 2 fig 3 fig 4

H

L L L L

H H H

fig 1 fig 2 fig 3 fig 4

H

L L L L

H H H


VARIHEAT AA/AW 600-900-1200-1500

CONFIGURATIONS

Example configurations are shown but there are over 3000 configurations available offering the ultimate flexibility for tight plant room spaces. This range is purpose designed for swimming pool environmental control, providing the necessary comfort, moisture related structural protection and economical operation.

36

AIR HANDLING UNITS

High levels of relative humidity can be extremely damaging to a pool environment, but with a carefully designed ventilation solution, humidity is kept at a comfortable level.

A swimming pool environmental control unit must carry out its primary task of dehumidifying the pool space air, be designed and constructed to withstand the pool air environment, and provide a continuously modulated quantity of heated or cooled fresh air for the comfort of all who use it. We can advise on the most effective domestic or commercial pool ventilation products from our selection of heat pump and fresh air technologies.

37

38

ENVIRONMENTAL CONTROL SOLUTIONS FOR:PUBLIC AND COMMERCIAL SWIMMING POOLS

QUICK GUIDE

POOL TYPE

INSTALLATION

APPLICATIONS

INDOOR

HOLIDAY & WATER PARKS

OLYMPIC POOLS

LEISURE CENTRES

DELTA SYSTEMS HRD SYSTEMS

PLANT ROOM

PUBLIC POOLS

OPERATION

HEATING, COOLING, DEHUMIDIFICATION & VENTILATION

HOTELS, SCHOOLS & HEALTH CLUBS

D E LTA 4

Delta touchscreen controls

SWIMMING POOL AIR HANDLING UNITS

DELTA 1-2-4-6-8-10-12-14-16


� Self-regulating fresh air control with heat recovery

� Automatic control of exhaust air volume to match pool usage

� Free-cooling (Delta 1-2)

� Free-cooling and heat pump air cooling (Delta 4-16)


� Speed controllable EC/inverter fans in all models



Remote monitoring/control

As standard the following remote connectivity is available:

� Screen mirroring to Android/iOS mobile devices using third-party app

� Screen mirroring to web browser with ActiveX

� BMS interfaces for Modbus, BACnet IP and BACnet MS/TP

� Wired remote control interfacesThe Delta range are sophisticated air handling units incorporating hybrid heat pump and fresh air dehumidification technology. With dynamic heat recovery to swimming pool water and air using a heat pump, the Delta is the ultimate solution for a commercial or public indoor swimming pool.

39

Delta operating on maximum dehumidification of pool air with full heat recovery to pool water and air. Available energy is removed from exhaust air stream. Supplementary heat, if required, supplied by LPHW (water or air).

CONDENSATE

Retu

rn A

ir

Supp

ly A

ir

WARM DRY AIR

Full dehumidification and heat recovery

HOT DRY AIR COOL DRY AIR WARM HUMID AIR

Delta operating on light dehumidification with full heat recovery and reduced fresh air stream – control system automatically selects correct operating mode and damper position. LPHW heat available when required.

CONDENSATE

Retu

rn A

ir

Supp

ly A

ir

WARM DRY AIR

Light dehumidification and heat recovery


Delta models 4 and above provide an air conditioning facility to minimise the effects of solar gain from larger glazed areas or very high usage. Automatic damper and mode control.

Supp

y A

ir

Retu

rn A

ir

CONDENSATE

WARM DRY AIR

Air-conditioning


Air temperature set back control is incorporated as standard in all Delta units and controlled by a time clock. Pool hall air is dropped to a lower temperature for maximum economy. Air recirculation is maintained, dampers allow low fresh air flow.

CONDENSATE

Retu

rn A

ir

Supp

y A

ir

WARM DRY AIR

Night set back



DELTA 1-2-4-6-8-10-12-14-16

HOW THE AIR FLOWS THROUGH THE DELTA

40

Specifications Units DT 1 DT 2 DT 4 DT 6 DT 8 DT 10 DT 12 DT 14 DT 16

Nominal recirculation air flow m3/h 2,500 2,600 3,000 4,000 5,000 6,000 7,000 10,000 12,000Exhaust/fresh air flow (stepped control) m3/h 120-1,200 130-1,300 150-1,500 200-2,000 250-2,500 300-3,000 350-3,500 670-6,700 850-8,000Total dehumidification @ 28°C/60% RH by heat pump and maximum fresh air l/h 9.8 10.9 12.5 16.6 20.8 25.0 29.2 56.5 62.4Heat to airVia heat pump (Mode B)Via standard LPHW @ 80°CVia upgraded LPHW @ 55°CTotal Mode B + standard LPHW

kWkWkWkW

3.82017

23.8

4.92219

26.9

5.12521

30.1

6.63026

36.6

8.03530

43.0

10.03832

48.0

12.14236

54.1

30.08572

115.0

35.09077

125.0Heat to pool waterVia heat pump (Mode A)Via LPHW @ 80°CVia LPHW @ 55°CTotal Mode A + LPHW

kWkWkWkW

4.02311

27.0

5.52311

28.5

5.83316

38.8

8.03316

41.0

10.03316

43.0

12.54020

52.5

15.04020

55.0

35.06532

100.0

43.06532

108.0Cooling dutyTotalSensible

kWkW

00

00

-4.2-2.9

-5.5-3.9

-6.7-4.7

-8.4-5.9

-10.1-7.1

-23.0-13.0

-28.0-15.0

Nominal power consumed kW 2.6 2.9 2.9 3.4 4.4 5.9 7.4 12.3 17.0WidthDepthHeightWeight

mmmmmmkg

1740654

1685300

1740654

1685310

1840704

1970350

1840704

1970360

1840704

1970370

1840854

1970410

1840854

1970460

286011262120954

2860112621201020

Options

� Delta 1-6 single or three phase

� Delta 8-16 three phase only

� Upgraded LPHW heat exchanger for air heating

� Left-hand or right-hand orientation (Delta 4-16)

� Top, side or bottom supply fan outlet

� Front or rear supply fan outlet (Delta 14-16)

� Rear exhaust and fresh air connections (Delta 14-16)


DELTA 1-2-4-6-8-10-12-14-16

41

Options

� Upgraded LPHW heat exchanger for air heating

� Left-hand or right-hand orientation

� Choice of supply fan outlet orientations

� Choice of fan static pressures

� BMS interface

H R D 30


HRD 15-20-25-30


� Self-regulating fresh air control

� Automatic control of exhaust air volume to match pool usage

� Free-cooling (HRD 15-20)

� Air-conditioning (HRD 25-30)


� Double skinned insulated cabinet

� Bespoke fan specificationsThe HRD range are sophisticated air handling units incorporating hybrid heat pump and fresh air dehumidification technology. With dynamic heat recovery to swimming pool water and air using a heat pump, the HRD is the ultimate solution for a leisure centre swimming pool.

For correct sizing of the HRD please contact our dedicated sales team who can assist in tailoring the selection for your swimming pool project.

Specifications Units HRD 15 HRD 20 HRD 25 HRD 30

Nominal recirculation air flowExhaust/fresh air flow (stepped control)Dehumidification @ 28°C/60% RH by heat pumpTotal by heat pump and maximum fresh air

m³/hm³/h

l/hl/h

12,0006,000

3163

19,50013,500

45116

25,00018,000

68152

35,00023,000

88210

Heat to airVia heat pump (Mode B)Via standard LPHW @ 80°CMaximum available (Mode B + standard LPHW)Heat to waterVia heat pump (Mode A)

kWkWkW

kW

3770

107

40

55100155

60

72150222

95

90210300

117Cooling dutySensible Mode ASensible Mode B

kWkW

-20 -30

-49-30

-67-37

Nominal power consumed (dependent upon main fan duty) kW 17 23 31 44

42

DEHUMIDIFIERS

Managing the moisture level in your buildings is crucial to creating a comfortable environment for your team and customers, and minimising the threat and costs of moisture damage to the structure. Our high-performance dehumidifiers help you achieve both with incredible ease of use.

Our extensive range includes state-of-the-art condensation and desiccant dehumidifiers, meaning we can impartially determine the right type for your circumstances, with a choice of wall-mounted or floor-standing solutions available.

Whether you need to preserve valuable artefacts or create a drying room for your workers, our dehumidifiers offer complete control of humidity levels across a wide variety of commercial and industrial applications.

43

44

WHY CHOOSE OUR COMMERCIAL PRODUCTS?

Hot water heat pumps provide a sustainable heating solution which, compared to fossil fuel or direct electric systems, will dramatically cut operating costs and carbon emission.

SUSTAINABLE HEATING SOLUTIONS

Our wall-mounted and floor-standing dehumidifiers prevent mould and bacteria development and keep stored goods and artefacts dry.

Our development teams focus on reducing the carbon foot print by making our products as environmentally friendly as possible.

PROTECTING THE ENVIRONMENT

Our products are easy to install, use and maintain.

USER AND MAINTENANCE FRIENDLY

Our heaters, dehumidifiers and coolers keep temperature and humidity at a comfortable level.

WORK IN HEALTHY CONDITIONS

Our wide range of units and operating temperatures ensure there is a system to fit every commercial or industrial need.

CHOOSING THE BEST SOLUTION

We focus on developing energy saving units

REDUCE OPERATING COSTS

CREATING HEALTHY ENVIRONMENTS

Refrigerant or desiccant drying solutions for manufacturing, process drying and cold storage.

LARGE SCALE INDUSTRIAL DRYING

Condensation dehumidifier

The process of dehumidification involves moisture-laden air (return air) being drawn into a dehumidifier where the air passes across a refrigerated coil. The air is rapidly cooled below its dew point, condensing the water vapour and recovering its latent heat energy for re-use. The cooled air is then passed across the condenser where it is reheated and (supply air) returned to the served area at the required lower humidity.

Adsorption dehumidifier

The air to be dehumidified (process air), passes through a slowly rotating silica gel rotor. The desiccant material attracts the moisture to its surface, removing it from the air stream (dry air). A second, smaller air stream (reactivation air) usually heated to around 120°C, is required to remove the moisture from the rotor. This (wet) air must then be exhausted to atmosphere using a duct. Slowly rotating the rotor through both air-streams creates a continuous dehumidification process.

TECHNOLOGIESCONDENSATION VS ADSORPTION

Humid Air Dry, WarmAir

Expansion

Evaporator Condenser

Condensateto waste

20˚C28˚C

80%40%

Compressor

Humid Air Warm Dry Air

Rotor

Warm VeryHumid Air

Fresh Air

60% REACTIVATION AIR

DRY AIR

WET AIR

PROCESS AIR

20°C50°C

40%

Heater

60%

20°C

38°C

9%

Unlike most suppliers, the Dantherm Group product ranges include both condensation AND adsorption drying equipment. With products that span both technologies, we can offer impartial advice that provides a solution specifically suited for your application. Refer to our website for the latest information on our adsorption drying equipment.

Advantages:

� Low energy consumption

� Minimal maintenance required

� High specific moisture extraction (kg/kWh)

� Easy installation

� Small diameter condensate drain

Disadvantages:

� Low performance in cold conditions below 3°C

� Smaller dehumidifiers less suitable for ducting

Where used:Generally, in recirculation applications where the humidity requirement is above 40% RH.

� Preservation during storage

� Data centres

� Substations and switch gear rooms

� Clothes drying

� Food drying

� Swimming pools

Where not used:

� Single pass (total loss) ventilations systems

� Below 40% RH

� Below 3°C

� Explosive environments

Advantages:

� High moisture removal rate in a single air pass

� Can achieve very low absolute humidity levels

� Can work in low temperatures

� Can work in very low humidity

Disadvantages:

� High energy consumption

� Low specific moisture extraction (kg/kWh)

� Ducting from/to outside for reactivation air and wet air

� High rotor replacement costs

Where used:Generally, where a very low relative humidity or absolute humidity is required, and/or where the operating temp is below 3°C.

� Pharmaceutical

� Food

� Confectionery

� Specialist manufacturing that requires very low RH

� Low temp storage and freezer rooms

Where not used:

� Recirculation applications that require RH above 40%

� Applications that are sensitive to high supply air temperature

� Swimming pools

� Sites with limited power supply (unless mains gas or steam reactivation is available)

� Areas that have no access to outside walls

45

46

DEHUMIDIFICATION SOLUTIONS FOR:BUILDINGS, STORAGE, AGRICULTURE, FOOD & BEVERAGE

QUICK GUIDE

INSTALLATION

APPLICATIONS

THROUGH-THE-WALL

FLOOR-STANDING

DATA CENTRES & ELECTRONICS

CONFECTIONERY

DUCTED

MUSEUMS, ARCHIVES & GALLERIES

DH 150-300-600 VARIHEAT SYSTEMS DH 334

WALL-MOUNTED

PRESERVATION

DRYING ROOMS

DH 15, DH 30-60 DH 75-110AX/BX

47

DEHUMIDIFICATION SOLUTIONS FOR:BUILDINGS, STORAGE, AGRICULTURE, FOOD & BEVERAGE

QUICK GUIDE

INSTALLATION

APPLICATIONS

THROUGH-THE-WALL

FLOOR-STANDING

GARAGES & CAR STORAGE

PHARMACEUTICAL & SCIENTIFIC

DUCTED

STORAGE & WAREHOUSING

VARIHEAT SYSTEMS DH 334

WALL-MOUNTED

FOOD AND BEVERAGE

AGRICULTURE

DH 15, DH 30-60 DH 150-300-600DH 75-110AX/BX

WALL-MOUNTED DEHUMIDIFIERS

DH 15

D H 15

Specifications Units DH 15AX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)Product size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

mmkg

mm ID

0-35150.9225

053

R407c230/1ph/50

0.433.81018

825 x 363 x 3203310

Options


Performance data

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 5 10 15 20 25 30

40% 50% 60% 70%

80%

1.0

0.9

0.8

0.7

0.6

0.5

0.60

0.55

0.50

0.45

0.40

0.35

*AT 60% RH

SENSIBLE HEATOUTPUT kW* TO AIR

ELECTRICALINPUT kW*

OTW15

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120 140 160 180

5.9

5.2

4.2

3.4

2.7

2.1

*AT 60% RH


DH110

40% 50% 60% 70% 80%

� Compact design for installation in small areas

� Self contained with fully automatic operation

� Integral humidistat

� Tamper proof controls

� Epoxy polyester painted zintec steel cabinet

� Hot gas defrost for low temperature operation

� Air filter

The DH 15 wall-mounted dehumidifier has a compact design for installation in small areas, making it an ideal solution for stairwells, corridors and changing rooms. Being fully self contained, with tamper proof controls is perfect for public buildings such as schools, museums and galleries.

48


DH 30

D H 30

Specifications Units DH 30AX DH 30AXP

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyDehumidifier power inputFLAMaximum supply fuseLRA (compressor start)Heater typeHeat outputFlow rateProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm ID

0-35301.9700

052

R407c230/1ph/50

0.754.410

15.8Optional LPHW

3.05.0

782 x 270 x 6484016

0-35301.9700

052

R407c230/1ph/50

0.7512.720

15.8Standard Electric

2.0-

782 x 270 x 6484016

Options


� Electric air heater

� Floor stand kit

Performance data

15˚C

10˚C

Litres/24 hours0 5 10 15 20 25 30

0.6

0.5

0.40

0.35

*AT 60% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 10 20 30 40 50 60

2.15

1.9

1.7

1.5

1.35

1.2

0.8

0.75

0.7

0.65

0.6

0.55

*AT 60% RH


ELECTRICALINPUT kW*

DH30

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120

4.1

3.5

3.1

2.6

2.3

1.9

1.3

1.2

1.1

1.0

0.9

0.8

*AT 60% RH


ELECTRICALINPUT kW*

DH60

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 5 10 15 20 25 30

0.8

0.7

0.6

0.5

0.50

0.45

0.40

0.35

*AT 60% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 10 20 30 40 50 60

2.15

1.9

1.7

1.5

1.35

1.2

0.8

0.75

0.7

0.65

0.6

0.55

*AT 60% RH


ELECTRICALINPUT kW*

DH30

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

4.1

3.5

3.1

2.6

2.3

1.9

1.3

1.2

1.1

1.0

0.9

0.8


ELECTRICALINPUT kW*

DH60

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%



� Polyester coated evaporator and condenser

� Plastisol coated galvanised steel cabinet


� Quiet centrifugal fans


The DH 30 is a high performance, low cost wall-mounted dehumidifier with integrated air heating option available. Designed to treat spaces, such as garages, changing rooms and archives, it maintains a comfortable humidity, minimises condensation and keeps heating costs to a minimum. For drying rooms it is a great compact solution.

49


DH 60

D H 60

Specifications Units DH 60AX DH 60AXP

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyDehumidifier power inputFLAMaximum supply fuseLRA (compressor start)Heater typeHeat outputFlow rateProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm ID

0-35603.5

1,2800

54R407c

230/1ph/501.27.51330

Optional LPHW5.05.0

1247 x 270 x 6486016

0-35603.5

1,2800

54R407c

230/1ph/501.2

24.23230

Standard Electric4.0-

1247 x 270 x 6486016

Options


� Electric air heater

� Floor stand kit

Performance data

15˚C

10˚C

Litres/24 hours0 5 10 15 20 25 30

0.6

0.5

0.40

0.35

*AT 60% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 10 20 30 40 50 60

2.15

1.9

1.7

1.5

1.35

1.2

0.8

0.75

0.7

0.65

0.6

0.55

*AT 60% RH


ELECTRICALINPUT kW*

DH30

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120

4.1

3.5

3.1

2.6

2.3

1.9

1.3

1.2

1.1

1.0

0.9

0.8

*AT 60% RH


ELECTRICALINPUT kW*

DH60

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 5 10 15 20 25 30

0.8

0.7

0.6

0.5

0.50

0.45

0.40

0.35

*AT 60% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 10 20 30 40 50 60

2.15

1.9

1.7

1.5

1.35

1.2

0.8

0.75

0.7

0.65

0.6

0.55

*AT 60% RH


ELECTRICALINPUT kW*

DH30

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

4.1

3.5

3.1

2.6

2.3

1.9

1.3

1.2

1.1

1.0

0.9

0.8


ELECTRICALINPUT kW*

DH60

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%






� Quiet centrifugal fans


The DH 60 is a high performance, low cost wall-mounted dehumidifier with integrated air heating option available. Designed to treat spaces, such as garages, changing rooms, drying rooms and archives, it maintains a comfortable humidity, minimises condensation and keeps heating costs to a minimum.

50

FLOOR-STANDING DEHUMIDIFIERS

DH 75-110AX/BX

D H 110

Specifications Units DH 75AX DH 110AX DH 110BX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)Heater typeHeat output @ 80°C flowFlow rateProduct size (w x d x h)WeightCondensate drain size (brass compression)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm

5-35864.0

1,1800

53R407c

230/1ph/501.59.51355

Optional LPHW8.99.6

1520 x 385 x 79614315

5-351085.2

1,1800

53R407c

230/1ph/502.1

12.02066

Optional LPHW8.99.6

1520 x 385 x 79614415

5-351085.2

1,1800

53R407c

400/3ph/502.05.51030

Optional LPHW8.99.6

1520 x 385 x 79614415

Performance data

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120 140 160 180

5.9

5.2

4.2

3.4

2.7

2.1

2.5

2.1

1.8

1.6

1.4

1.3

*AT 60% RH


ELECTRICALINPUT kW*

DH110

40% 50% 60% 70% 80%

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120 140 160

4.8

4.0

3.3

2.8

2.3

1.7

1.6

1.5

1.4

1.3

1.2

1.1

*AT 60% RH


ELECTRICALINPUT kW*40% 50% 60% 70% 80%

Options


� LPHW air heater

� Remote humidistat

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120 140 160 180

5.9

5.2

4.2

3.4

2.7

2.1

2.5

2.1

1.8

1.6

1.4

1.3

*AT 60% RH


ELECTRICALINPUT kW*

DH110

40% 50% 60% 70% 80%

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 20 40 60 80 100 120 140 160

4.8

4.0

3.3

2.8

2.3

1.7

1.6

1.5

1.4

1.3

1.2

1.1

*AT 60% RH


ELECTRICALINPUT kW*40% 50% 60% 70% 80%




� Stove enamelled aluminium cabinet


� Quiet centrifugal fans, two speeds


The DH 75 and DH 110 are floor-standing high capacity dehumidifiers. With high moisture extraction for low energy use, makes them ideal for dehumidifying your space. Options for additional air heating, and through-the-wall installation that can be situated adjacent to the area, makes them ideal for museums, offices, storage, data centres and more!

DH 75 DH 110

51

LARGE CAPACITY FLOOR-STANDING DEHUMIDIFIERS

DH 150

D H 150

Options

� Top or rear fan outlet

� Return air filter

� Condensate pump

� Compressor soft start

� Top discharge box

� External condenser unit


20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

7.0

6.2

5.4

2.7

2.6

2.5

*AT 75% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 200 400 600 800 1000 1200

43

38

34

29

25

22

13.0

12.0

11.3

10.5

9.8

9.0

*AT 75% RH


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

9.4

8.2

7.0

6.2

5.4

3.0

2.8

2.7

2.6

2.5

*AT 75% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

20˚C

15˚C

Air

tem

pera

ture

˚C

43

38

34

29

25

13.0

12.0

11.3

10.5

9.8


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

10.8

9.4

8.2

7.0

6.2

5.4

3.2

3.0

2.8

2.7

2.6

2.5

*AT 75% RH


ELECTRICALINPUT kW*

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

Air

tem

pera

ture

˚C

43

38

34

13.0

12.0

11.3


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

Performance data

Specifications Units DH 150AX DH 150BX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLA (electrical)Maximum supply fuseLRA (compressor start)LRA (compressor soft-start)Heater typeHeat outputFLA (heater)Maximum fuse sizeProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAAA

OptionalkWAA

mmkg

inch

0-351507.4

2,5000-200

58R407c

230/1ph/502.521306128

Top box electric9

3650

660 x 660 x 1313130

¾ BSPM

0-351507.4

2,5000-200

58R407c

400/3ph/502.511163013

Top box electric9

1216

660 x 660 x1313130

¾ BSPM



� Constant flow fan – automatically adjusts to ducting




The DH 150 high capacity floor-standing dehumidifier is self contained with fully automatic operation. With an integral humidistat, a ‘constant flow’ fan, and options for heating, condensate pump and external condenser unit, you can be confident in your space being controlled to your needs. This makes it ideal for warehousing and storage, sub stations and data centres.

52


DH 300

D H 300 BY

Options


� Condensate pump





20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

7.0

6.2

5.4

2.7

2.6

2.5

*AT 75% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 200 400 600 800 1000 1200

43

38

34

29

25

22

13.0

12.0

11.3

10.5

9.8

9.0

*AT 75% RH


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

9.4

8.2

7.0

6.2

5.4

3.0

2.8

2.7

2.6

2.5

*AT 75% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

20˚C

15˚C

Air

tem

pera

ture

˚C

43

38

34

29

25

13.0

12.0

11.3

10.5

9.8


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

10.8

9.4

8.2

7.0

6.2

5.4

3.2

3.0

2.8

2.7

2.6

2.5

*AT 75% RH


ELECTRICALINPUT kW*

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

Air

tem

pera

ture

˚C

43

38

34

13.0

12.0

11.3


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

Performance data

Specifications Units DH 300BY

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)LRA (compressor soft-start)Product size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAAA

mmkg

inch

-15 - +3530014.7

5,0000-140

66R407c

400/3ph/506.71924

10134

980 x 826 x 1475220

1½ BSPM





� Reverse cycle defrost for very low temperature operation

� Constant flow fan – automatically adjusts to ducting

The DH 300 high capacity floor-standing dehumidifier is self contained with fully automatic operation. With integral humidistat, and options for heating, condensate pump and external condenser unit, and high pressure fan, you can be sure in your space being controlled to your demands. This makes it ideal for warehousing and storage, sub stations and data centres.

53


DH 600

D H 600

Options

� Top or rear fan outlet



� Condensate pump





20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

7.0

6.2

5.4

2.7

2.6

2.5

*AT 75% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 200 400 600 800 1000 1200

43

38

34

29

25

22

13.0

12.0

11.3

10.5

9.8

9.0

*AT 75% RH


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

9.4

8.2

7.0

6.2

5.4

3.0

2.8

2.7

2.6

2.5

*AT 75% RH

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

20˚C

15˚C

Air

tem

pera

ture

˚C

43

38

34

29

25

13.0

12.0

11.3

10.5

9.8


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 50 100 150 200 250 300

10.8

9.4

8.2

7.0

6.2

5.4

3.2

3.0

2.8

2.7

2.6

2.5

*AT 75% RH


ELECTRICALINPUT kW*

35˚C

30˚C

25˚C

20˚C

15˚C

10˚C

Air

tem

pera

ture

˚C

Litres/24 hours0 100 200 300 400 500 600

22.4

19.8

17.5

15.1

13.3

11.4

6.8

6.2

5.9

5.5

5.1

4.7

*AT 75% RH


ELECTRICALINPUT kW*

DH300

35˚C

30˚C

25˚C

Air

tem

pera

ture

˚C

43

38

34

13.0

12.0

11.3


ELECTRICALINPUT kW*

DH600

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

30% 40% 50% 60% 70% 80%

Performance data

Specifications Units DH 600BY

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)LRA (compressor soft-start)Product size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAAA

mmkg

inch

-15 - +3560029.7

9,0008063

R407c400/3ph/50

102635

13555

1730 x 1250 x 1600497

1½ BSPM





� Reverse cycle defrost for very low temperature operation

The DH 600 high capacity floor-standing dehumidifier is self contained with fully automatic operation. With integral humidistat, and options for heating, condensate pump and external condenser unit, and high pressure fan, you can be sure in your space being controlled to your demands. This makes it ideal for warehousing and storage, sub stations and data centres.

54

Specifications Units AA 600 AA 900 AA 1200 AA 1500

Air flowExternal available static pressureFresh air flow (option)External available staticDehumidification @ 30oC/60% RHDehumidification @ 30oC/70% RH

m3/hPa

m3/hPal/hl/h

2,000330

0-9001004.65.5

2,500220

0-9001006.57.8

3,500290

0-9001008.5

10.8

4,300350

0-90010010.113.2

Heat to airNet via heat pumpVia standard LPHW @ 80oCMax available (heat pump + standard LPHW)Via upgraded LPHW @ 55oCMax available (heat pump + upgraded LPHW)

kWkWkWkWkW

5.111.014.09.4

12.7

7.113.518.611.516.9

10.024.030.020.427.0

14.028.036.023.836.8

Nominal power consumed kW 2.1 2.8 3.6 4.7

AA denotes heat recovery to air and optional LPHW heater for air only

LARGE CAPACITY DUCTED DEHUMIDIFIERS

VARIHEAT AA 600-900-1200-1500

A A 1200

Options

� Fresh air module


� Upgraded LPHW heat exchanger for air

� Electric resistance air heaters (6/12/18kW)

� Air cooling with remote condenser

Electrical heater option notes

� In lieu of LPHW heat exchangers



� Dynamic heat pump heat recovery

� Constant flow EC fan (models 600, 900, 1200)

� Speed controllable EC fan (model 1500)



The Variheat AA models are premium dehumidifiers incorporating heat pump drying technology. With a wide operating range from 35% RH to 100% RH, in air temperatures from 3°C to 35°C, the Variheat is the optimum dehumidifier for the majority of industrial/commercial humidity control applications. Over 3000 configurations offer the ultimate flexibility for tight plant room spaces. The sophisticated controls, with integral PLC and touchscreen user interface, are ideal for integration with a wide variety of building management systems.

Touchscreen controls

55

HIGH TEMPERATURE FLOOR-STANDING PROCESS DRYING

DH 334

D H 334

Specifications Units DH 334BH

Operating temperature rangeDehumidification @ 50°C/60% RHHeat to air via dehumidificationHeat to air via resistance heaters and dehumidificationAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumedMin. supply capacityMax. supply fuse Heater ratingFLANominal power consumedLRARLANominal running currentProduct size (w x d x h)Weight

°Cl/hkWkW

m³/hPa

dB(A)

V/HzkWAA

kWA

kWAAA

mmkg

30-701710

18.55,800

069

R134a400/3ph/50

14.129359

124.972129

985 x 700 x 1476170

Performance data

20

15

10

5

0

0 10 20 40 60 80 10030 50 70 90

Overheat zone

Overload zone

Defrost zone

30°C

25°C

40°C50°C

60°C

70°C

Air %RH

Litr

es/h

our

Options

� Range of Calorex control panels

� Stainless steel cabinet

� Air inlet filters

� Rapid moisture removal at lowest cost per litre extracted

� Latent energy reclaimed to reduce power consumption

� Drying at lower temperatures reduces risk of heat damage

� Even drying improves product quality

� Low maintenance

56

WATER HEATING & COOLING

A Calorex hot water heat pump extracts up to five times as much energy as it consumes from the air and upgrades it to heat water in a range of commercial applications. Calorex heat pumps are specifically designed to maximise the benefits offered by the climate in the Middle East and South-East Asia.

Storing water is a great way to use a natural resource to your advantage, whether that’s for gardening, showering or for washing your car. But without an effective water cooling solution during warmer months, your tank will heat up and facilitate the growth of bacteria and algae, thus compromising the safety of the water coming through your taps. Calorex water cooling chillers eliminate the issue. Our robust water coolers come in domestic, commercial and industrial sizes for use in buildings, commercial spaces and facilities management applications.

57

WATER HEATING AND COOLING SOLUTIONS FOR:BUILDINGS, HOSPITALS AND HOTELS

QUICK GUIDE

OPERATION

INSTALLATION

APPLICATIONS

HOT WATER

HOSPITALS

NURSING HOMES & SPORTS CLUBS

HOTELS & SCHOOLS

PRIVATE VILLAS & APARTMENTS

PLANT ROOM

OUTSIDE

COLD WATER

WA 634-1234BCPP 30-140H PP 22-140BC

58

COMMERCIAL WATER HEATING – AIR SOURCE HEAT PUMPS

PP 30-45-70-90-140H

P P 140 H

Options

� Soft start

� High pressure fans

� Certified cupronickel WRAS approved heat exchanger to allow the unit to be used in a direct system with potable water

� Hot water production to 68°C

� Space cooling as a by product of heat recovery

� Up to 400% running cost and carbon savings against electric heating

� Up to 48% running cost and carbon savings against fossil fuel system

� No flues or storage tanks

� Easy to retrofit

� Minimal service requirements

� Range of capacities from 6kW to 140kW

� R134a ozone friendly refrigerant ensures reliable operation up to 68°C

� Fully weatherproof polyester or epoxy coated cabinet


� Air source heat pumps for hot water up to 68°C during ambient temperature from 10°C to 50°C

The Pro-Pac range of air source hot water heat pumps are a quality range of packaged units specifically designed for hot water heating to 68°C and are the leading choice for heating and hot water in hotels, hospitals, industrial spaces, nursing homes, restaurants, schools and more. The Pro-Pac heat pumps can be installed outside or in a plant room that has adjacent outside walls and can be supplied with high pressure fans for ducting.

* WRAS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges.

59

Specifications Units PP 30H PP 45H PP 70H PP 90H PP 140H



Output @ +25°C/55% RH ambient

Input @ +25°C/55% RH ambient





°C

°C

kW

kW

kW

kW

kW

kW

10-50

10-68

25.0/22.3

4.5/7.1

21.1/18.9

4.3/6.6

18.4/16.5

4.1/6.3

10-50

10-68

31.2/27.8

5.9/9.1

26.3/23.6

5.6/8.5

23.0/20.6

5.3/8.1

10-50

10-68

47.0/41.9

8.2/13.1

39.8/35.6

7.8/12.2

34.7/31.0

7.4/11.6

10-50

10-68

62.3/55.5

11.7/18.2

52.7/47.1

11.1/17.0

46.0/41.1

10.6/16.1

10-50

10-68

94.0/83.8

16.5/26.2

79.5/71.1

15.6/24.4

69.4/62.1

14.8/23.1Power supply

Minimum supply capacity

Recommended supply fuse

V/Hz

A

A

400/3ph/50

20

30

400/3ph/50

22

30

400/3ph/50

35

50

400/3ph/50

44

60

400/3ph/50

70

80Nominal air flow

External static (standard units)

External static (uprated units)

m3/h

Pa

Pa

5,500

0

N/A

10,000

0

60

14,000

0

80

20,000

0

60

28,000

0

100Water flow ±10%

Pressure drop (water)

Water connections

l/min

m hd

inch

66

2.1

1½ BSPM

66

4.2

1½ BSPM

130

3.9

1½ BSPM

130

4.2

1½ BSPM

260

5.3

1½ BSPMFan

Compressor

Condenser

Sound pressure level @ 10m



Weight

Type

Type

Type

dB(A)

dB(A)

mm

kg

1 x Axial

1 x Scroll

54

64

1525 x 780 x 1080

247

1 x Axial

1 x Scroll

55

65

1643 x 1057 x 1311

329

1 x Axial

1 x Scroll

59

70

1793 x 1200 x 1312

490

1 x Axial

2 x Scroll

55

65

2057 x 1195 x 1334

632

1 x Axial

2 x Scroll

59

70

2146 x 1663 x 1405

858

Cu tube in shell (WRAS approved Cu-Ni optional)

COMMERCIAL WATER HEATING – AIR SOURCE HEAT PUMPS

PP 30-45-70-90-140H

TYPICAL INSTALLATION DIAGRAM FOR CALOREX HOT WATER HEAT PUMP

Duty – output to water @ 30°C/55°C

60

COMMERCIAL WATER COOLING – AIR COOLED HEAT PUMPS

WA 634ACL-634ACH-1234BC

WA 1234 B C

Specifications Units WA 634ACL WA 634ACH WA 1234BC




°C°C

kWkW

kWkW

5-5010-40

5.51.9

2.81.4

10-5010-40

5.51.9

2.81.4

10-5510-40

9.83.2

5.92.5

Nominal cold water productionMin./max. tank size

l/hl

50060/500

50060/500

900110/1000

Electrical inputPower supplyMax. supply fuseStarting current

kWV/Hz

AA

1.9220-240/1ph/50

2032

1.9220-240/1ph/50

2032

3.2400/3ph/50

1648

Water flow ±10%Flow resistanceConnections

l/minmhdinch

332.1

¾ BSPM

332.1

¾ BSPM

332.1

¾ BSPMNominal air flowFan external resistance (standard)

m³/hPa

150050

150050

300050

FanSound pressure level @ 3mProduct size (w x d x h)Weight

TypedB(A)mmkg

1 x Centrifugal63

820 x 702 x 762111

1 x Centrifugal63

820 x 702 x 762111

1 x Centrifugal65

1060 x 705 x 807157


� Domestic sizes giving up to 900 litres per hour of cold water production


� Quiet operation

� Certified cupronickel WRAS approved heat exchanger to allow the unit to be used in a direct system with potable water

� Non ozone depleting refrigerant (R134a)Calorex water chillers are ideal for cooling water in a variety of applications. They can provide cold-water for showers in homes or leisure clubs, plunge pools in spas, water immersion pools for sports recovery or even water for process cooling.

61

P P 140 B C

Specifications Units PP 22BC PP 30BC PP 45BC PP 70BC PP 90BC PP 140BC



Output @ 32°C water

Input @ 32°C water

Output @ 10°C water

Input @ 10°C water

°C

°C

kW

kW

kW

kW

10-55

10-38

12.4

4.1

7.5

3.3

10-55

10-38

25.5

8.3

15.5

6.6

10-55

10-38

30.0

10.0

18.2

8.0

10-55

10-38

51.0

16.2

30.9

12.8

10-55

10-38

59.9

20.0

36.6

16.0

10-55

10-38

102.1

32.4

61.9

25.5Power supply

Min. supply capacity

Recommended supply fuse

Max. starting current standard (LRA)

Max. starting current soft start (LRA)

V/Hz

A

A

A

A

400/3ph/50

13

20

48

25

400/3ph/50

21

30

96

33

400/3ph/50

25

40

102

34

400/3ph/50

42

60

96

33

400/3ph/50

50

70

102

34

400/3ph/50

84

125

96

33Nominal air flow

Fan external resistance (standard)

m3/h

Pa

5,000

0

5,500

0

11,000

0

14,000

0

22,000

0

28,000

0Water flow ±10%

Pressure drop (water)

Water connections

l/min

m hd

inch

33

4.2

1½ BSPF

66

2.1

1½ BSPM

66

4.5

1½ BSPM

133

3.4

1½ BSPM

166

4.5

1½ BSPM

266

5.3

2 BSPMCompressor

Fan



Weight

Type

Type

dB(A)

mm

kg

1 x Scroll

1 x Axial

52

1264 x 600 x 725

145

1 x Scroll

1 x Axial

62

1525 x 780 x 1080

219

1 x Scroll

1 x Axial

64

1643 x 1057 x 1311

329

2 x Scroll

1 x Axial

68

1793 x 1200 x 1312

549

2 x Scroll

2 x Axial

70

2057 x 1195 x 1334

599

4 x Scroll

2 x Axial

71

2246 x 1663 x 1405

1009


PP 22-30-45-70-90-140BC

Options

� Certified cupronickel WRAS* approved heat exchanger to allow the unit to be used in a direct system with potable water


� Mono-block design with in-built thermostat


� Quiet operation


Pro-Pac commercial water chillers, with weatherproof construction, and quiet owlet fans are ideal for outdoor installation. They can provide cold-water for showers in homes or leisure clubs, plunge pools in spas, water immersion pools for sports recovery or even water for process cooling. * WRAS is a conformance mark that demonstrates that an item

complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges.

62

To domestic cold water services

Circulating pump @ 33 l/min

Calorex WA 634 water chiller

Existing cold water storage tank (insulated), up to 500L capacity

Existing cold water storage tank

Fill

Circulating pump @ 33 l/min

Buffer tank (direct type) normal capacity 125-250L

Calorex WA 634 water chiller


INSTALLATION EXAMPLES WA 634

INSTALLATION TO COOL DOMESTIC WATER

INSTALLATION WHEN EXISTING STORAGE TANK IS INADEQUATELY INSULATED OR GREATER THAN 500 LITRE CAPACITY

63

Model identification syntax For example

� AW600A-CF01+FA

� AW = type of heat pump or range

� 600 = size

� A = power supply

� -CF01 = physical configuration

� +FA = factory fitted option

Prefix = type of heat pump or product

AW Air-to-water heat pump

WA Water-to-air heat pump

AA Air-to-air heat pump

WW Water-to-water heat pump

CPT Swimming pool heat pump

DH Dehumidifier

DT Delta

IPT Inverter swimming pool heat pump

HRD HRD

PP Pro-Pac copper or cupro-nickel heat exchanger

PPT Pro-Pac with titanium heat exchanger

RCU Remote condenser

TTW Through-the-wall version of DH

VPT Vertical inverter swimming pool heat pump

Other

DT DehuTech

WD Commercial AHUs

Number = size of product For example

IPT 8, 12, 16, 22, 28

PPT 22, 30, 45, 70, 90, 140

Variheat 600, 900, 1200, 1500

Delta 1, 2, 4, 6, 8, 10, 14, 16

DH 15, 30, 33, 55, 60, 75, 110, 150, 300, 600

Suffix (first letter) = power supply

A 220/240V 1-phase 50 Hz

B 380/415V 3-phase 50 Hz (3~ + N)

C 110/115V 1-phase 60 Hz

D 208/230V 1-phase 60 Hz (2~ no neutral)

E 208/230V 3-phase 60 Hz (3~ no neutral)

F 480V 3-phase 60 Hz (3~ + N)

G 380/415V 3-phase 50Hz (3~ no neutral)

H 460/480V 3-phase 60Hz (3~ no neutral)

J 110/115V 1-phase 50Hz

K 380/420V 3-phase 60Hz (3~ + N)

Suffix (follows power supply) = feature

VH Variheat

HC Heater/chiller

C Chiller only

P Electric air heater

LPHW Low pressure hot water heat exchanger, unless standard

Suffix (follows power supply and feature) = operating parameters

H High water temperature

M Medium water temperature

L Low water temperature

No X or Y Ambient defrost

X Hot gas defrost

Y Reverse cycle defrost

F High pressure fan

S Soft-start

Configuration details. Refer to individual products. For example

-CF01 Variheat build configuration

-EF, -ER Delta handing

-SO, -TO, -RO Supply fan direction

+ABCDEFG Delta options fitted

+EC LPHW Variheat and Delta upgraded air heater

+FA Variheat fresh air module

EX Wooden crate

NoR Supplied without refrigerant

GLOSSARY

64

NOTES

65

NOTES

66

Dealer:

KEEP UPDATEDFOLLOW US ON:

danthermgroup.com

Dantherm A/SMarienlystvej 65DK-7800 SkiveDenmarkt. +45 96 14 37 00

Dantherm Ltd.Unit 12, Galliford RoadMaldon CM9 4XDUnited Kingdomt. +44 (0)1621 856611

Dantherm GmbHOststraße 14822844 NorderstedtGermanyt. +49 40 526 8790

Dantherm S.p.A.Via Gardesana 1137010 Pastrengo (VR)Italyt. +39 045 6770533

Dantherm Sp. z o.o.ul. Magazynowa 5a62-023 GądkiPolandt. +48 61 65 44 000

Dantherm SP S.A.C/Calabozos 6(Polígono Industrial)28108 Alcobendas, MadridSpaint. +34 91 661 45 00

Dantherm SAS23 rue Eugène Héna� 69694 Vénissieux CedexFrancet. +33 4 78 47 11 11

Dantherm ASLøkkeåsveien 263138 SkallestadNorwayt. +47 33 35 16 00

Dantherm ABFridhemsvägen 3602 13 NorrköpingSwedent. +46 (0)11 19 30 40

Dantherm LLCTransportnaya 22/2142800, StupinoMoscowRussiat. +7 (495) 642 444 8

MCS ChinaUnit 2B, No. 512Yunchuan RoadBaoshang, Shanghai, 201906Chinat. +8621 61486668

Termigo S.LCarrer dels Velluters, 18-246980 Paterna, ValenciaSpaint. +34 961 524 866

AirCenter AGTäfernstrasse 14CH-5405 Baden DättwilSwitzerlandt. +41 43 500 00 50

Heylo GmbHIm Finigen 928832 AchimGermanyt. +49 4202 97550

SET Energietechnik GmbHAugust-Blessing-Straße 571282 HemmingenGermanyt. +49 7150 94540

July

202

1

2021 HVAC SOLUTIONS - .NET Framework

Documents