2019 Sound Insulation Heat Insulation Shear Dowels Connecting Elements Strong Products for efficient solutions
2019
Sound Insulation Heat Insulation Shear Dowels
Connecting Elements
Strong Products for efficient solutions
EC2, DIN 4108, DIN 7396 and DIN 4109 page 1
Impact sound insulation products for stairs, landings tested according to DIN 7396
The listed sound products of Pakon AG were tested at the EMPA according to DIN 7396. The sound level measurements according to DIN 7396 are determined according to a standardised test setup and can be used for a statistical energy analysis (SEA) in accordance with DIN EN 12354 and DIN 4109-32 will be applied.
HQW – general technical Approval DIBt Z 15.7-321
TSB – type approvel Prüfamt
Tübingen
NF – Staircase head
NB – Staircase foot
PD – locking dowel
TSP – selfadhesive plates
10/15 mm or Rolls
EC2, DIN 4108, DIN 7396 and DIN 4109 page 2
Impact sound insulation products for stairs, landings tested according to DIN 4109, EN ISO 10140:3:2010 and heat insulation to DIN 4108
HQW – general technicalApproval DIBt Z 15.7-321
Draft ancor – type approval LGA Nürnberg
Single dowel ESD galvanized or Inox
(Quality in S 355 und S 690, Class III + IV)
NURSID SW 24/30 mandrel dowel - Balcony
(Inox 1.4301)
NURSID SW 24 mandrel dowel - facade
(Inox 1.4301)
EC2, DIN 4108, DIN 7396 and DIN 4109 page 3
Wall lock System NURSID KS16 – approvel tested by LGA Nürnberg
Dry connection for precast concrete panels with each other or with props
Wall thickness – from 10 cm
Monting – the side and from above
opening – lockable
Deconstruction capable with mounting box
Tolerance – angular deviation to 4°
+/- 10 mm by 360°
Ball dome with Slotted hole
EC2, DIN 4108, DIN 7396 and DIN 4109 page 4
Schall- Isodorn Typ HQW ST – Set with integrated height adjustment
Schall- Isodorn
Typ HQW SB – Set with top plate for the connection of Steel Balcony
Schall- Isodorn Typ HQW ZD – Set with integrated pull cord
Wall locking dowel
Typ PW – constructive locking dowel for use in masonry walls
Stair dowel
Typ PD – locking dowel
Gripp
Typ A, Typ S – Constructive masonry reinforcement on the role and for the butt made of glass fiber fabric
EC2, DIN 4108, DIN 7396 and DIN 4109 page 5
ZEMBORD - Concrete board for stairs, walls and slabs with connection reinforcement
standard – height 18- 50 cm
WD-P – Joining plate
WD-F – Joining tape
WD-I – Injection
Concrete quality C 45/55
Material thickness 2 cm
Perforation after EC 2
Concrete cover to 20-50 mm
For concrete steel Ø 6 – 28 mm
Butt joint view Butt joint cut
EC2, DIN 4108, DIN 7396 and DIN 4109 page 6
Pakon – plastic profiles
- Own tools- Production in Germany- High quality standard
08/2019