hndg · 2018-01-11 · Australia New Zealand Sizes are approximate. All measurements shown are in millimetres. Veil® Intelligent Wall Hung Toilet TOILETS / INTELLIGENT INT - V Jan

Australiawww.kohler.com.au

New Zealandwww.kohler.co.nz

Sizes are approximate.All measurements shown are in millimetres.

INT - VTOILETS / INTELLIGENTVeil® Intelligent Wall Hung Toilet

Jan 20161268465-A04-A

Installation Notes:• Water supply pressure range: Min 70kPa - Max 500kpa.• Power supply requirements: Dedicated 10A min, 220~240V AC, 50/60Hz supply with ELCB or GFCI. Rated power:1000W. Max instant power: 1600W. • In-wall cistern has an adjustable height and is designed to be �xed to the �oor and studs using the supplied bolts.• IMPORTANT: This toilet must be installed in accordance with AS/NZS 3500.1 Plumbing and Drainage.

* Nominal dimensions based on in-wall tank being installed at designated height.This height can be adjusted to suit user preference.

Product• Veil wall hung intelligent toilet

Kohler CodeK-5402A-0

Included Components• Veil wall hung toilet with integrated bidet.• In wall cistern - Hydro tower 500 (4.5/3L).• Touchless �ush button panel.• Wireless one touch remote.• Waste pipes (S & P trap) & straight inlet connection pipe.• Wall �xing bolts.

Toilet Features• Touchless �ush button panel in Honed White.• Ergonomic french curve seat with antibacterial material.• Sensor activated auto open and close function for seat lid.• Insulated in-wall cistern - fully framed.• Automatic, touchless or manual Dual flush (4.5/3L).• Built in LED night-light.• Deodouriser function.• Back up shut-off valve located on cistern.• Rimless pan design.• Vitreous china.

Bidet Features• Instantly heated water with stainless steel wand.• Spray wand features adjustable water pressure and temperature, and oscillate and pulsate functions.• Air blower and heated seat with adjustable temperature.• Self cleaning and UV sanitising nozzle.

Technical Details

Side View Front View

Top View In wall cisternWeight: Pan - 36kg ApproxIn-wall Tank - 16kg Approx

WELS RATING(4 Star 3.5L av. �ush)

RemoteFlush Panel

675Power supplyentry abovethis support

Fixings

Signal wire

Water supply to bidet

438

350

48*

Finished Floor

260 398*

90mm

Fixing holes

S-Trap pipe

478

438

180230

150

13~62

215

150

1027*

50

435





Jan 20161268465-A04-A








Technical Details




RemoteFlush Panel


Fixings

Signal wire


438

350

48*

Finished Floor

260 398*

90mm

Fixing holes

S-Trap pipe

478

438

180230

150

13~62

215

150

1027*

50

435





Jan 20161268465-A04-A








Technical Details




RemoteFlush Panel


Fixings

Signal wire


438

350

48*

Finished Floor

260 398*

90mm

Fixing holes

S-Trap pipe

478

438

180230

150

13~62

215

150

1027*

50

435





Jan 20161268465-A04-A








Technical Details




RemoteFlush Panel


Fixings

Signal wire


438

350

48*

Finished Floor

260 398*

90mm

Fixing holes

S-Trap pipe

478

438

180230

150

13~62

215

150

1027*

50

435

Australia www.kohler.com.au

New Zealand www.kohler.co.nz


STS - GTOILETS / SUITESGrandeTM Back to Wall Toilet Suite

April 20161267978-A04-A

Floor

ToiletOutlet

160 MAX

Pan o�setCollar

PanCollar

Wall

Vario Pan Connector

Vario Pan Connector

90 MIN

Wall

Floor

ToiletOutlet

650

430

395 370

150

315

732.5

75

56

125

180

80

810

400

102

185 139

420

Floor Fixings

L of OutletC

Pan sideinlet hole

*Note: Set outs between 160-230mm are achievable with the Long Adjustable Vario Connector 98451A-0 (not supplied).

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 72 psi (500 kPa).• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector & or pan

offset collar (supplied).• Top left rear entry water supply hose is supplied. Pan side entry water supply hose must be purchased separately if required.• Supplied hose ring is only required with a pan side entry setup.

Product• Grande back to wall toilet suite

Kohler Code76078A-0

Included Components• Grande toilet pan.• Grande toilet cistern 4.5/3L.• Grande Quiet Close , VQR (vertical,

quick release toilet seat).• Vario pan connector.• Offset pan collar (20mm).• Fill valve for top left rear entry.• Fill valve for pan side entry (supplied with pan).• Top left rear entry water supply hose.• 2 x caps for pan side entry holes.• 1 x hose ring for pan side entry hole.• Floor fixing kit.

Features• Dual flush (4.5/3L).• Water entry: Top left rear entry or right/left pan side entry.• P-trap set out height: 185mm.• S-trap set out:

• Standard: 90mm - 160mm (with vario pan connector &20mm offset pan collar - supplied).

• Optional: 160mm - 230mm (with long adjustable variopan connector, 98451A-0 - not supplied).

• Rimless pan design.• Vitreous china.

TM

Technical Details

Top View

Front ViewSide View

Vario pan connector S-trap installation

The more stars the more water efficient

Licence No 0060

3.5 litres per average flushWhen tested in accordance with Standard AS/NZS 6400

litres per full flush

litres per half flush

WELS RATING(4 Star 3.5L av. flush)

Weight: Pan - 35kg ApprCistern - 17kg Appr

Maximum set out

Minimum set out




STS - ETOILETS / SUITESEscale® Back to Wall Toilet Suite - Top Left Back Entry

Oct 20151182481-A04-G


Pan Collar

ToiletOutlet

Floor

Wall

Vario Pan Connector

90 MIN

160 MAX

Wall

Floor

Vario Pan Connector

Pan Collar

ToiletOutlet

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied)

and pan collar (not supplied).• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Product• Escale back to wall toilet suite - standard top left back entry

Kohler Code3737A-0

Included Components• Escale toilet pan• Escale toilet cistern 4.5/3L• Escale quiet close toilet seat

with metal hinge• Vario pan connector• Fill valve• Floor fixing bolts and anchors

Features• Dual flush (4.5/3L)• Top left back entry• P-trap set out height: 185mm• S-trap set out:

• 90mm - 160mm (with vario pan connector)• 160mm - 220mm (with long adjustable vario pan connector

98451A-0 (not supplied)).• Concealed trapway• Open rim• Vitreous china

Technical Details


Top View Vario pan connector S-trap installation


Licence No 0060





Maximum set out

Minimum set out


Related Products• Escale basins• Escale BubbleMassage™ baths

• Escale toilets • Escale baths




WH - E TOILETS / WALL HUNGEscale® Wall Hung Toilet

Feb 20161182499-A04-G

23095

O102

O55

35

600

335

135

375366

160

350400

Pan fixings

Finished floor

Inlet

Outlet

of Inlet

of Outlet

400 30565

305

8865 max

1155

289

135280

Pan fixings

35

245

10-200

180230

478438

150

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 72 psi (500 kPa).• The in wall cistern has an adjustable height and is designed to be fixed to the floor and studs using the appropriate bolts (not supplied).• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Product• Escale wall hung toilet with bevel flush button panel• Escale wall hung toilet with oval flush button panel

Kohler Code45287A-0 2664A-0

Included Components• Escale P-trap toilet pan• Escale quiet close toilet seat with metal hinges• In wall cistern 88mm 4.5/3L• Flush button panel• Waste & inlet straight connection pipes• Waste pipe gasket• Wall fixing bolts• Chrome fixing bolt caps

Features• Choice of bevel or oval flush button panel• In wall cistern - fully framed• Dual flush (4.5/3L)• Back up shut-off valve located on cistern and accessible through the flush button panel• P-trap set out: 205mm• Open rim• Vitreous china

Technical Details

Top View

Front ViewSide View


In wall cistern

In wall cistern & pan (recommended height shown)

Weight: Pan - 33.5kg ApprCistern - 10kg Appr

Left side:

Bevel panel

Right side:

Oval panel

Related Products• Escale basins • Escale BubbleMassage™ baths

• Escale toilets • Escale baths




Sep 20161277443-A04-C

STS - P TOILETS / SUITESKohler Dual Back to Wall Toilet Suite - Rear or Side Entry

Floor

Wall

140 MAX

Vario Pan Connector

20mmOffset PanCollar

ToiletOutlet

Floor

Wall

90 MAX

Vario Pan Connector

20mmOffset PanCollar

ToiletOutlet

Floor Fixings Outlet

Rear Entry

L of OutletC

295

80

665

378

160

121

56

75

775

167

850

185 120

220

433102

Pan SideEntry

*Note: Set outs between 160-230mm are achievable with the Long Adjustable Vario Connector 98451A-0 (not supplied).Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) to 80 psi (551 kPa).• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector along with the 20mm offset pan collar (supplied).• Rear entry water supply hose is supplied. Pan side entry water supply hose is not supplied and must be purchased separately.• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Product• Kohler Dual back to wall toilet suite - rear or side entry

Kohler Code77304A-0

Included Components• Toilet pan.• Toilet cistern 4.5/3L.• Quiet Close, Vertical Quick ReleaseTM (VQR) toilet seat.• Vario pan connector.• Offset pan collar (20mm).• Fill valve for rear entry.• Fill valve for pan side entry (supplied with pan).• Rear entry water supply hose (pan side entry water supply hose not supplied).• 2 x caps for pan side entry holes.• 1 x hose ring for pan side entry hole (for use with pan side entry setup only).• Floor fixing bolts and anchors.

Features• Dual flush (4.5/3L)• Water entry: Top left rear entry or right/left pan side entry.• P-trap set out height: 185mm.• S-trap set out: • Standard: 90mm - 140mm (with vario pan connector & 20mm offset pan collar - supplied). • Optional: 160mm - 230mm (with long adjustable vario pan connector, 98451A-0 - not supplied).• Box rim.• Vitreous china.

Technical Details

Top View

Front ViewSide View



Licence No 0060






Maximum set out

Minimum set out

Pan side entry

with cap

Pan side entry

with hose ring




Nov 20151277444-A04-A

STS - R TOILETS / SUITESReach® Compact Back to Wall Toilet Suite - Rear or Side Entry

162

600

149

835

430

102

185

170

250

510

406365

760

60

55

137


Pan Collar

ToiletOutlet

Floor

Wall

Vario Pan Connector

90 MIN

160 MAX

Wall

Floor

Vario Pan Connector

Pan Collar

ToiletOutlet

320

65

Pan SideEntry

Floor Fixings

L of Outlet

Outlet

Rear Entry

C

Technical Details

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 73 psi (500 kPa).• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied) and pan collar (not supplied).• Rear entry water supply hose is supplied. Pan side entry water supply hose is not supplied and must be purchased separately.• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Product• Reach compact back to wall toilet suite - Rear or side entry

Kohler Code77303A-0

Included Components• Reach compact toilet pan.• Reach compact toilet cistern 4.5/3L.• Reach compact quiet close toilet seat with metal hinge.• Vario pan connector.• Fill valve for rear entry.• Fill valve for pan side entry (supplied with pan).• Rear entry water supply hose (pan side entry water supply hose not supplied).• 2 x pan side entry rubber caps.• Floor fixing bolts, anchors and chrome covers.

Features• Dual flush (4.5/3L).• Water entry: Top left rear entry or right/left pan side entry.• P-trap set out height: 185mm.• S-trap set out: • Standard: 90mm - 160mm • Optional: 160mm - 230mm (with long adjustable vario pan connector, 98451A-0 - not supplied).• Concealed trapway.• Box rim.• Vitreous china.


Top View


Related Products• Reach basins • Reach toilets


Maximum set out

Minimum set out


Licence No 0060





Pan side entry

with cap




Nov 20151182496-A04-G

WF - P TOILETS / WALL FACEDPanache® Wall Faced Toilet

88

O55

O102

85

215

390352

185

10

550

358350 155

587 720

150

548

44

65 max

Floor

ToiletOutlet

110 MAX

Floor

ToiletOutlet

20mm O�setPan Collar

20mm O�setPan Collar

Wall

Vario Pan Connector

90 MIN

Wall

Vario Pan Connector

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied) along with the 20mm offset pan collar (supplied).• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the brackets using bolts (supplied).• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Product• Panache WF P-trap toilet with bevel flush button panel• Panache WF P-trap toilet with oval flush button panel• Panache WF S-trap toilet with bevel flush button panel• Panache WF S-trap toilet with oval flush button panel

Related Products• Panache basins • Panache toilets • Panache tapware

Kohler Code45284A-018613A-045284A-H-0 18613A-H-0

Included Components• Panache toilet pan• Panache quiet close toilet seat• In wall cistern 88mm 4.5/3L• Vario pan connector (S-trap only)• 20mm offset collar (S-trap only)• Fixing brackets and bolts• Flush button panel• Floor fixing bolts and anchors

Features• Choice of bevel or oval flush button panel• In wall cistern - with support brackets• Dual flush (4.5/3L)• Back up shut-off valve located on cistern and accessible through the flush button panel• P-trap set out: 185mm• S-trap set out: 90mm-110mm ( with vario pan connector & 20mm offset pan collar)• Box rim• Vitreous china

Technical Details

Top View

Front ViewSide View

3.3


In wall cistern Vario pan connectorS-trap installation

Minimum set out

Maximum set out

In wall cistern installation


Left side:

Bevel panel

Right side:

Oval panel




Sep 20151182495-A04-E

WF - O TOILETS / WALL FACEDOve® Wall Faced Toilet

O102

215

105

185360

390

30

550

360280 160

O55

88

587 720

150

548

44

65 max

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the brackets using bolts (supplied).• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Product• Ove wall faced toilet with bevel flush button panel• Ove wall faced toilet with oval flush button panel

Related Products• Ove basins • Ove furniture

• Ove toilets • Ove baths

Kohler Code45282A-018611A-0

Included Components• Ove toilet pan• Ove quiet close toilet seat with metal hinge• In wall cistern 88mm 4.5/3L• Fixing brackets and bolts• Flush button panel• Floor fixing bolts and anchors

Features• Choice of bevel or oval flush button panel• In wall cistern - with support brackets• Dual flush (4.5/3L)• Back up shut-off valve located on cistern and accessible through the flush button panel.• P-trap set out: 185mm• Open rim• Vitreous china

Technical Details

Top View

Front ViewSide View

In wall cistern

In wall cistern installation


Left side:

Bevel panel

Right side:

Oval panel


KOHLER19965 OVE WALL FACE

4.53.03.3 litres per average flush




WH - O TOILETS / WALL HUNGOve® Wall Hung Toilet

Feb 20161182501-A04-G

360280 160

40

287

65

O102

O55

180

540

400 32572

Pan fixings

75

325328

135

Pan fixings

Finished floor

Inlet

Outlet

of Inlet

of Outlet

360

8865 max

1155

289

135

35

245

10-200

180230

478438

150

280

400

Installation Notes:• Water supply pressure range: 20 psi (137 kPa) - 72psi (500 kPa).• The in wall cistern has an adjustable height and is designed to be fixed to the floor and studs using the appropriate bolts (not supplied).• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Product• Ove wall hung toilet with bevel flush button panel• Ove wall hung toilet with oval flush button panel

Related Products• Ove basins • Ove toilets • Ove drop-in bath

Kohler Code45281A-018610A-0

Included Components• Ove P-trap toilet pan• Ove quiet close toilet seat with metal hinges• In wall cistern 88mm 4.5/3L• Flush button panel• Waste & inlet straight connection pipes• Waste pipe gasket• Pan fixing bolts• Fixing bolt cover caps

Features• Choice of bevel or oval flush button panel• In wall cistern - fully framed• Dual flush (4.5/3L)• Back up shut-off valve located on cistern and accessible through the flush button panel• P-trap set out: 225mm• Open rim• Vitreous china

Technical Details


Top View In wall cistern

Weight: Pan - 33.5kg ApprCistern - 10kg Appr


Left side:

Bevel panel

Right side:

Oval panel

In wall cistern & pan(recommended height shown)

hndg · 2018-01-11 · Australia New Zealand Sizes are approximate. All measurements shown are in millimetres. Veil® Intelligent Wall Hung Toilet TOILETS / INTELLIGENT INT - V Jan

Documents